Skip to contentSkip to conversation

korina: use resource_size()

PATCH Applied Dan Carpenter 2 participants 2 messages Mar 22, 2010 – Mar 23, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 korina: use resource_size()

This size calculation is wrong. It should be end - start + 1. Use resource_size() to calculate it correctly.

---
I don't have a way to test this, or even to compile it. :/

drivers/net/korina.c +3 -3
index 300c224..edaedc7 100644
@@ -1135,7 +1135,7 @@ static int korina_probe(struct platform_device *pdev)
 
 	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs");
 	dev->base_addr = r->start;
-	lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
+	lp->eth_regs = ioremap_nocache(r->start, resource_size(r));
 	if (!lp->eth_regs) {
 		printk(KERN_ERR DRV_NAME ": cannot remap registers\n");
 		rc = -ENXIO;
@@ -1143,7 +1143,7 @@ static int korina_probe(struct platform_device *pdev)
 	}
 
 	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx");
-	lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
+	lp->rx_dma_regs = ioremap_nocache(r->start, resource_size(r));
 	if (!lp->rx_dma_regs) {
 		printk(KERN_ERR DRV_NAME ": cannot remap Rx DMA registers\n");
 		rc = -ENXIO;
@@ -1151,7 +1151,7 @@ static int korina_probe(struct platform_device *pdev)
 	}
 
 	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx");
-	lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
+	lp->tx_dma_regs = ioremap_nocache(r->start, resource_size(r));
 	if (!lp->tx_dma_regs) {
 		printk(KERN_ERR DRV_NAME ": cannot remap Tx DMA registers\n");
 		rc = -ENXIO;