AP4: I2C patches
Quoted 10 lines · Kuninori Morimoto
Kuninori Morimoto (3):
ARM: mach-shmobile: sh7372: Add I2C0, I2C1 support
ARM: mach-shmobile: ap4evb: Add TouchScreen support
ARM: mach-shmobile: ap4evb: Add R2025S RTC supportThese 3 patches add I2C support to AP4-EVB board.
It are based on Magnus's
- SDHI patche series
- INTCS patche series
Quoted 7 lines · Kuninori Morimoto
Signed-off-by Kuninori Morimoto <[email protected]>---
depend on
[PATCH 2/3] ARM: mach-shmobile: ap4evb: Add TouchScreen supportarch/arm/mach-shmobile/board-ap4evb.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-)
Quoted 6 lines · Kuninori Morimoto
This patch add SDHI support for G4 board. Current gpio frame work doesn't have
the method to control only pull-up/down/free. So, it have specialgpio_pull_upfunction for SDHI. It is quick hack, so this function should be replaced by correct gpio frame work in future.
Quoted 5 lines · Kuninori Morimoto
Signed-off-by Kuninori Morimoto <[email protected]>--- arch/arm/mach-shmobile/intc-sh7367.c | 6 +++--- arch/arm/mach-shmobile/intc-sh7377.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
Quoted 9 lines · Kuninori Morimoto
Add support for the sh7377 INTCS interrupt controller.
INTCS is the interrupt controller for the sh7377 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor.
INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller.
All applied, thanks.