Skip to contentSkip to conversation

AP4: I2C patches

PATCH Paul Mundt 1 participant 1 message Apr 7, 2010 SuperH

lore
Share & tools
lore

Paul Mundt

author
#0 lore raw
Quoted 10 lines · Kuninori Morimoto

Kuninori Morimoto (3):
ARM: mach-shmobile: sh7372: Add I2C0, I2C1 support
ARM: mach-shmobile: ap4evb: Add TouchScreen support
ARM: mach-shmobile: ap4evb: Add R2025S RTC support

These 3 patches add I2C support to AP4-EVB board.

It are based on Magnus's
- SDHI patche series
- INTCS patche series

Quoted 7 lines · Kuninori Morimoto

---
depend on
[PATCH 2/3] ARM: mach-shmobile: ap4evb: Add TouchScreen support

 arch/arm/mach-shmobile/board-ap4evb.c |   16 ++++++++++------
 1 files changed, 10 insertions(+), 6 deletions(-)
Quoted 6 lines · Kuninori Morimoto

This patch add SDHI support for G4 board. Current gpio frame work doesn't have
the method to control only pull-up/down/free. So, it have special gpio_pull_up function for SDHI. It is quick hack, so this function should be replaced by correct gpio frame work in future.

Quoted 5 lines · Kuninori Morimoto
---
 arch/arm/mach-shmobile/intc-sh7367.c |    6 +++---
 arch/arm/mach-shmobile/intc-sh7377.c |    6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)
Quoted 9 lines · Kuninori Morimoto

Add support for the sh7377 INTCS interrupt controller.

INTCS is the interrupt controller for the sh7377 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor.

INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller.

All applied, thanks.