Skip to contentSkip to conversation

cx23885: Message Signaled Interrupts issue

DISCUSSION Igor M. Liplianin 2 participants 3 messages Aug 30, 2010 – Sep 3, 2010 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

I was wondering, if someone tried 2.6.36-rc kernels with PCIe MSI enabled. With TeVii s470 after rmmod cx23885 && insmod cx23885 then szap some channel I have 'No irq handler for vector' message. After reboot it's OK.
I think it's A/V core interrupts involved.

igor@useri:~$ szap -l10750 bridge-tv -p
reading channels from file '/home/igor/.szap/channels.conf'
zapping to 5 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

Message from syslogd@localhost at Tue Aug 31 00:55:32 2010 ... localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:33 2010 ... localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:34 2010 ... localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:35 2010 ... localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1)

It is similar issue with NetUP DVB-S2 , but CI involved through GPIO interrupts. Compro e650f works well, though it uses neither A/V core interrupts nor GPIO interrupts.

Signature · 2 lines
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
#1 lore raw
Quoted 4 lines · Igor M. Liplianin

I was wondering, if someone tried 2.6.36-rc kernels with PCIe MSI enabled. With TeVii s470 after rmmod cx23885 && insmod cx23885 then szap some channel I have 'No irq handler for vector' message. After reboot it's OK.
I think it's A/V core interrupts involved.

Hmm. A/V core interrupts aren't turned on for IR by default for the TeVii S470 (you have to use a module option to turn on the IR for the TeVii S470). I can't recall if Steven's changes enabled A/V core interrupts.

I'll have to look sometime this weekend, if the hurricane doesn't knock out the electricity.

Regards,
Andy

Quoted 23 lines
igor@useri:~$ szap -l10750 bridge-tv -p
reading channels from file '/home/igor/.szap/channels.conf'
zapping to 5 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

Message from syslogd@localhost at Tue Aug 31 00:55:32 2010 ... localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:33 2010 ... localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:34 2010 ... localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:35 2010 ... localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1)

It is similar issue with NetUP DVB-S2 , but CI involved through GPIO interrupts. Compro e650f works well, though it uses neither A/V core interrupts nor GPIO interrupts.

#2 lore raw

В сообщении от 3 сентября 2010 04:36:09 автор Andy Walls написал:

Quoted 11 lines · Igor M. Liplianin
Quoted 5 lines

I was wondering, if someone tried 2.6.36-rc kernels with PCIe MSI enabled. With TeVii s470 after rmmod cx23885 && insmod cx23885 then szap some channel I have 'No irq handler for vector' message. After reboot it's OK.
I think it's A/V core interrupts involved.

Hmm. A/V core interrupts aren't turned on for IR by default for the TeVii S470 (you have to use a module option to turn on the IR for the TeVii S470). I can't recall if Steven's changes enabled A/V core interrupts.

No, his changes not enabled A/V core interrupts.
BTW, the same code works properly without MSI.

Quoted 30 lines

I'll have to look sometime this weekend, if the hurricane doesn't knock out the electricity.

Regards,
Andy

Quoted 23 lines
igor@useri:~$ szap -l10750 bridge-tv -p
reading channels from file '/home/igor/.szap/channels.conf'
zapping to 5 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid
= 0x0100 sid = 0x003b using '/dev/dvb/adapter0/frontend0' and
'/dev/dvb/adapter0/demux0'

Message from syslogd@localhost at Tue Aug 31 00:55:32 2010 ... localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:33 2010 ... localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:34 2010 ... localhost kernel: do_IRQ: 1.137 No irq handler for vector (irq -1)

Message from syslogd@localhost at Tue Aug 31 00:55:35 2010 ... localhost kernel: do_IRQ: 0.137 No irq handler for vector (irq -1)

It is similar issue with NetUP DVB-S2 , but CI involved through GPIO interrupts. Compro e650f works well, though it uses neither A/V core interrupts nor GPIO interrupts.

Signature · 2 lines
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks