x86/mrst: set vRTC's IRQ to level trigger type
PATCH 1/1 x86/mrst: set vRTC's IRQ to level trigger type
From: Feng Tang <[email protected]>
When setting up the mpc_intsrc structure for vRTC's IRQ, we need to set its irqflag to level trigger, otherwise it will be taken as edge triggered and the vRTC IRQ will fire only once, as there is never a EOI issued from the IA core for it.
The original code worked in previous kernel. This is because it was configured to level trigger type by luck. It fell into the default PCI trigger category which is level triggered.
Signed-off-by Feng Tang <[email protected]>
Signed-off-by Alan Cox <[email protected]>
---
arch/x86/platform/mrst/mrst.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/platform/mrst/mrst.c +1 -1
@@ -195,7 +195,7 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) totallen, (u32)pentry->phys_addr, pentry->irq); mp_irq.type =MP_IOAPIC ; mp_irq.irqtype = mp_INT; - mp_irq.irqflag =0 ; + mp_irq.irqflag =0xf ;/* level trigger and active low */ mp_irq.srcbus =0 ; mp_irq.srcbusirq = pentry->irq;/* IRQ */ mp_irq.dstapic =MP_APIC_ALL ;