2.6.39 breaks floppy
Hello,
floppy stopped working in 2.6.39 (confirmed on two machines). 2.6.38 worked fine./dev/fd0 is created but does not work (mdir says: "No such device or address", mount says "/dev/fd0 is not a valid block device"). dmesg shows no errors:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Bisected it to 9fd097b14918875bd6f125ed699d7bbbba5893ee (block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers)
Adding the removed line back to floppy.c fixes the problem.
Signature · 1 line
Ondrej Zary
Quoted 6 lines · Ondrej Zary
Hello,
floppy stopped working in 2.6.39 (confirmed on two machines). 2.6.38 worked fine./dev/fd0is created but does not work (mdir says: "No such device or address", mount says "/dev/fd0is not a valid block device"). dmesg shows no errors:
Quoted 7 lines
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077Bisected it to
9fd097b14918875bd6f125ed699d7bbbba5893ee(block: unexportDISK_EVENT_MEDIA_CHANGEfor legacy/fringe drivers)Adding the removed line back to
floppy.cfixes the problem.
Tejun?
Signature · 1 line
Jens Axboe
Hello,
Quoted 4 lines · Jens Axboe
Quoted 4 lines
Bisected it to
9fd097b14918875bd6f125ed699d7bbbba5893ee(block: unexportDISK_EVENT_MEDIA_CHANGEfor legacy/fringe drivers)Adding the removed line back to
floppy.cfixes the problem.
It's the same one as the following. Patch posted. It's caused by genhd->ev not allocated when ->events | async_events is empty.
https://bugzilla.kernel.org/show_bug.cgi?id=35832
Will soon post a patch.
Thanks.
Signature · 1 line
tejun