sh-pfc: Initial r8a73a4 PFC support
cover sh-pfc: Initial r8a73a4 PFC support
sh-pfc: Initial r8a73a4 PFC support
[PATCH 01/02] sh-pfc: Add r8a73a4 pinmux support [PATCH 02/02] sh-pfc: Add r8a73a4 GPIO IRQ support
This series is V1 of initial PFC support for the r8a73a4 SoC. Nothing out of the ordinary, just similar but different tables to describe the pinmux hardware and GPIOs on r8a73a4.
The header in the mach directory is still used, and in the future this will be removed when fully using PINCTRL. Until then a common location is needed so this series simply follows what other SoCs do. Because of this there is a dependency on the r8a73a4 SoC code.
---
Written against "next" renesas.git 811689afc214564c4a5f238ecf4d8bdc0e52b615 Requires "r8a73a4.h" provided by
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
arch/arm/mach-shmobile/include/mach/r8a73a4.h | 918 +++++++ drivers/pinctrl/sh-pfc/Kconfig | 5 drivers/pinctrl/sh-pfc/Makefile | 1 drivers/pinctrl/sh-pfc/core.c | 3 drivers/pinctrl/sh-pfc/core.h | 1 drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 2889 +++++++++++++++++++++++++ 6 files changed, 3817 insertions(+)
Quoted 5 lines · Magnus Damm
sh-pfc: Initial r8a73a4 PFC support
[PATCH 01/02] sh-pfc: Add r8a73a4 pinmux support [PATCH 02/02] sh-pfc: Add r8a73a4 GPIO IRQ support
Quoted 8 lines
This series is V1 of initial PFC support for the r8a73a4 SoC. Nothing out of the ordinary, just similar but different tables to describe the pinmux hardware and GPIOs on r8a73a4.
The header in the mach directory is still used, and in the future this will be removed when fully using PINCTRL. Until then a common location is needed so this series simply follows what other SoCs do. Because of this there is a dependency on the r8a73a4 SoC code.
Laurent, could you review these and either give me some Acks or
a branch to pull? I assume the base should be the renesas-pinmux-for-v3.10 tag in the renesas tree.
Thanks.
Quoted 14 lines · Magnus Damm
sh-pfc: Initial r8a73a4 PFC support
[PATCH 01/02] sh-pfc: Add r8a73a4 pinmux support [PATCH 02/02] sh-pfc: Add r8a73a4 GPIO IRQ support
This series is V1 of initial PFC support for the r8a73a4 SoC. Nothing out of the ordinary, just similar but different tables to describe the pinmux hardware and GPIOs on r8a73a4.
The header in the mach directory is still used, and in the future this will be removed when fully using PINCTRL. Until then a common location is needed so this series simply follows what other SoCs do. Because of this there is a dependency on the r8a73a4 SoC code.
Quoted 6 lines
Signed-off-by Magnus Damm <[email protected]>---
Written against "next" renesas.git
811689afc214564c4a5f238ecf4d8bdc0e52b615Requires "r8a73a4.h" provided by
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
For reference, these patches seem to depend on some of
the patches in the pinmux branch, tagged as renesas-pinmux-for-v3.10, but no other patches in next.
Quoted 13 lines
arch/arm/mach-shmobile/include/mach/r8a73a4.h | 918 +++++++ drivers/pinctrl/sh-pfc/Kconfig | 5 drivers/pinctrl/sh-pfc/Makefile | 1 drivers/pinctrl/sh-pfc/core.c | 3 drivers/pinctrl/sh-pfc/core.h | 1 drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 2889 +++++++++++++++++++++++++ 6 files changed, 3817 insertions(+)--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Simon,
Quoted 10 lines · On Tuesday 19 March 2013 09:26:53 Simon Horman wrote:
Quoted 9 lines · Magnus Damm
sh-pfc: Initial r8a73a4 PFC support
[PATCH 01/02] sh-pfc: Add r8a73a4 pinmux support [PATCH 02/02] sh-pfc: Add r8a73a4 GPIO IRQ support
This series is V1 of initial PFC support for the r8a73a4 SoC. Nothing out of the ordinary, just similar but different tables to describe the pinmux hardware and GPIOs on r8a73a4.
Quoted 8 lines
Quoted 4 lines
The header in the mach directory is still used, and in the future this will be removed when fully using PINCTRL. Until then a common location is needed so this series simply follows what other SoCs do. Because of this there is a dependency on the r8a73a4 SoC code.
Laurent, could you review these and either give me some Acks or a branch to pull? I assume the base should be the renesas-pinmux-for-v3.10 tag in the renesas tree.
I will review the patches. However, following a discussion I've had with Magnus, I won't take the patches without proper pinctrl support. The first patch uses the old API for r8a73a4 support in the PFC driver to make backporting easier, but I don't want to push it to mainline without additional patches to move to the pinctrl API.
Magnus, are you working on that ?
Signature · 3 lines
Regards, Laurent Pinchart