Skip to contentSkip to conversation

net: dm9000: random mac address support

PATCH New Andrew Ruder 1 participant 1 message Oct 23, 2013 Network drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: dm9000: random mac address support

When an unprogrammed EEPROM is attached to a dm9000, the dm9000 will come up with a invalid MAC address of ff:ff:ff:ff:ff:ff. Add code that gets enabled if CONFIG_RANDOM_MACADDR is enabled that generates a random (and valid) locally administered MAC address that allows the system to network boot until a real MAC address can be configured.

---
 drivers/net/dm9000x.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/net/dm9000x.c +9 -0
index f7170e0..b68d808 100644
@@ -342,6 +342,15 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS);
 
 	printf("MAC: %pM\n", dev->enetaddr);
+	if (!is_valid_ether_addr(dev->enetaddr)) {
+#ifdef CONFIG_RANDOM_MACADDR
+		printf("Bad MAC address (uninitialized EEPROM?), randomizing\n");
+		eth_random_enetaddr(dev->enetaddr);
+		printf("MAC: %pM\n", dev->enetaddr);
+#else
+		printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n");
+#endif
+	}
 
 	/* fill device MAC address registers */
 	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
Signature · 1 line
1.8.4.rc3