net: dm9000: random mac address support
PATCH 1/1 net: dm9000: random mac address support
When an unprogrammed EEPROM is attached to a dm9000, the dm9000 will come up with a invalid MAC address of ff:ff:ff:ff:ff:ff. Add code that gets enabled if CONFIG_RANDOM_MACADDR is enabled that generates a random (and valid) locally administered MAC address that allows the system to network boot until a real MAC address can be configured.
Signed-off-by Andrew Ruder <[email protected]>
--- drivers/net/dm9000x.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/net/dm9000x.c +9 -0
@@ -342,6 +342,15 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)DM9000_iow (DM9000_ISR ,ISR_ROOS |ISR_ROS |ISR_PTS |ISR_PRS );printf ("MAC: %pM\n" , dev->enetaddr); +if (!is_valid_ether_addr (dev->enetaddr)) { +#ifdef CONFIG_RANDOM_MACADDR +printf ("Bad MAC address (uninitialized EEPROM?), randomizing\n" ); +eth_random_enetaddr (dev->enetaddr); +printf ("MAC: %pM\n" , dev->enetaddr); +#else +printf ("WARNING: Bad MAC address (uninitialized EEPROM?)\n" ); +#endif + }/* fill device MAC address registers */ for (i =0 , oft =DM9000_PAR ; i <6 ; i++, oft++)
Signature · 1 line
1.8.4.rc3