Regression: Can't compile x86_64 with 32 Bit userland: arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in the 32 bit mode
Hello,
I used to compile 64 Bit Kernel on 32 Bit Userland and until v3.16 it worked. But with todays git head from Linus it does not:
(mini) [~/work/linux-2.6] make scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release UPD include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CC arch/x86/purgatory/purgatory.o
arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in the 32 bit mode make[1]: *** [arch/x86/purgatory/purgatory.o] Error 1
make: *** [archprepare] Error 2
I'll do git bisect to identify the offending commit.
I'm using Debian Wheezy 7 32 Bit on x86 with gcc version 4.7.2 (Debian 4.7.2-5).
Cheers,
Thomas
REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
Hello Vivek,
commit 8fc5b4d introduces a regression that no longer allows to compile x86_64 kernel under x86_32 userland. TJ on freenode/#kernel did analyze it:
Quoted 11 lines
(mini) [~/work/linux-2.6] make
scripts/kconfig/conf--silentoldconfigKconfigCHK include/config/kernel.release UPD include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CC arch/x86/purgatory/purgatory.o
arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in the 32 bit mode make[1]: *** [arch/x86/purgatory/purgatory.o] Error 1
make: *** [archprepare] Error 2
08:10 < TJ-> Glanzmann: The purgatory code from kexec is specifying ".code64"
08:11 < TJ-> Glanzmann: so when your local 32-bit linker tries to deal with that ... it errors 08:14 < TJ-> Glanzmann: there's only one introducing the purgatory stuff
08:14 < TJ-> 8fc5b4d Fri Aug 8 15:57:32 2014 -0700 Vivek Goyal purgatory: core purgatory functionality
Cheers,
Thomas
Re: REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
Quoted 17 lines · Thomas Glanzmann
Hello Vivek,
commit 8fc5b4d introduces a regression that no longer allows to compilex86_64kernel underx86_32userland. TJ on freenode/#kernel did analyze it:Quoted 11 lines
(mini) [~/work/linux-2.6] make
scripts/kconfig/conf--silentoldconfigKconfigCHK include/config/kernel.release UPD include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CC arch/x86/purgatory/purgatory.o
arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in the 32 bit mode make[1]: *** [arch/x86/purgatory/purgatory.o] Error 1
make: *** [archprepare] Error 2
Quoted 4 lines
08:10 < TJ-> Glanzmann: The purgatory code from kexec is specifying ".code64"
08:11 < TJ-> Glanzmann: so when your local 32-bit linker tries to deal with that ... it errors 08:14 < TJ-> Glanzmann: there's only one introducing the purgatory stuff
08:14 < TJ-> 8fc5b4d Fri Aug 8 15:57:32 2014 -0700 Vivek Goyal purgatory: core purgatory functionality
Hi Thomas,
Thanks for the report. I think this is also happening because purgatory is right now being compiled with compiler option -mcmodel=large. There was another report where older version of gcc did not support -mcmodel=large.
A patch is sitting in akpm's tree. That patch puts the new code under a new config option CONFIG_KEXEC_FILE. So as long as you don't enable CONFIG_KEXEC_FILE=y, you should be fine. This should not impact any of the existing functionality. Just that you will not get the benefit of new system call.
I hope this patch gets merged soon.
In the mean time I am trying to figure out how can I move away from using -mcmodel=large for purgatory.
Thanks
Vivek
H. Peter Anvin
reviewerRe: REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
It says "32-bit mode" which means it is another issue: we are dropping -m64 at some point.
Quoted 53 lines · Vivek Goyal
Quoted 2 lines · Thomas Glanzmann
Hello Vivek,
commit 8fc5b4d introduces a regression that no longer allows tocompile
Quoted 1 line
x86_64kernel underx86_32userland. TJ on freenode/#kernel didanalyze
Quoted 11 lines
it:
Quoted 9 lines
(mini) [~/work/linux-2.6] make
scripts/kconfig/conf--silentoldconfigKconfigCHK include/config/kernel.release UPD include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CC arch/x86/purgatory/purgatory.o
arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' notsupported in the 32 bit mode
Quoted 4 lines
Quoted 2 lines
make[1]: *** [
arch/x86/purgatory/purgatory.o] Error 1
make: *** [archprepare] Error 208:10 < TJ-> Glanzmann: The purgatory code from kexec is specifying
".code64"
Quoted 1 line
08:11 < TJ-> Glanzmann: so when your local 32-bit linker tries to
deal with that ... it errors
Quoted 1 line
08:14 < TJ-> Glanzmann: there's only one introducing the purgatory
stuff
Quoted 1 line
08:14 < TJ-> 8fc5b4d Fri Aug 8 15:57:32 2014 -0700 Vivek Goyal
purgatory: core purgatory functionality
Hi Thomas,
Thanks for the report. I think this is also happening because purgatory is
right now being compiled with compiler option -mcmodel=large. There was another report where older version of gcc did not support -mcmodel=large.A patch is sitting in akpm's tree. That patch puts the new code under a new config option
CONFIG_KEXEC_FILE. So as long as you don't enableCONFIG_KEXEC_FILE=y, you should be fine. This should not impact any of the existing functionality. Just that you will not get the benefit of new system call.I hope this patch gets merged soon.
In the mean time I am trying to figure out how can I move away from using -mcmodel=large for purgatory.
Thanks
Vivek
Signature · 1 line
Sent from my mobile phone. Please pardon brevity and lack of formatting.
Re: REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
Quoted 1 line · H. Peter Anvin
It says "32-bit mode" which means it is another issue: we are dropping -m64 at some point.
Thanks hpa. I am not adding -m64 to kbuild flags at all. So 32bit tool chain must be assuming -m32 by default, and probably that's the issue.
Thomas,
Can you please try attached single line patch and see if it fixes the issue for you.
Thanks
Vivek
--- arch/x86/purgatory/Makefile | 1 + 1 file changed, 1 insertion(+)
arch/x86/purgatory/Makefile +1 -0
@@ -11,6 +11,7 @@ targets += purgatory.ro # sure how to relocate those. Like kexec-tools, use custom flags. KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large +KBUILD_CFLAGS += -m$(BITS) $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld)
Re: REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
In reply to Vivek GoyalHello Vivek,
Quoted 6 lines · Vivek Goyal
A patch is sitting in akpm's tree. That patch puts the new code under a new config option
CONFIG_KEXEC_FILE. So as long as you don't enableCONFIG_KEXEC_FILE=y, you should be fine. This should not impact any of the existing functionality. Just that you will not get the benefit of new system call.
Quoted 6 lines
I hope this patch gets merged soon.
In the mean time I am trying to figure out how can I move away from using -mcmodel=large for purgatory.
perfect. I tried the patch and with the patch the kernel compiles again.
Cheers,
Thomas
Thomas Glanzmann
Tested-byRe: REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
In reply to Vivek GoyalHello Vivek,
Quoted 11 lines · Vivek Goyal
arch/x86/purgatory/Makefile +1
-0@@ -11,6 +11,7 @@ targets += purgatory.ro # sure how to relocate those. Like kexec-tools, use custom flags. KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large +KBUILD_CFLAGS += -m$(BITS) $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld)
Quoted 2 lines
Can you please try attached single line patch and see if it fixes the issue for you.
I tested the same and it works.
...
CC arch/x86/purgatory/purgatory.o AS arch/x86/purgatory/stack.o AS arch/x86/purgatory/setup-x86_64.o CC arch/x86/purgatory/sha256.o AS arch/x86/purgatory/entry64.o CC arch/x86/purgatory/string.o LD arch/x86/purgatory/purgatory.ro BIN2C arch/x86/purgatory/kexec-purgatory.c
...
I also made sure that I backed out the other patch _before_ I tried this one.
Cheers,
Thomas
H. Peter Anvin
reviewerRe: REGRESSION: 8fc5b4d: Unable to compile x86_64 kernel with x86_32 userland
In reply to Vivek GoyalYes, that is exactly right. The lack of -m64 is a bug.
Quoted 36 lines · Vivek Goyal
Quoted 1 line · H. Peter Anvin
It says "32-bit mode" which means it is another issue: we are
dropping -m64 at some point.
Thanks hpa. I am not adding -m64 to kbuild flags at all. So 32bit tool chain must be assuming -m32 by default, and probably that's the issue.
Thomas,
Can you please try attached single line patch and see if it fixes the issue for you.
Thanks
Vivek---
arch/x86/purgatory/Makefile| 1 +1 file changed, 1 insertion(+)Index: linux-2.6/arch/x86/purgatory/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/purgatory/Makefile 2014-08-20
11:32:21.723559119 -0400
+++ linux-2.6/arch/x86/purgatory/Makefile 2014-08-20 11:32:23.654570231
-0400arch/x86/purgatory/Makefile +0
-0@@ -11,6 +11,7 @@ targets += purgatory.ro # sure how to relocate those. Like kexec-tools, use custom flags.
KBUILD_CFLAGS:= -fno-strict-aliasing -Wall -Wstrict-prototypes(quoted diff) +1
-2-fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large +KBUILD_CFLAGS += -m$(BITS)$(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
$(call if_changed,ld)
Signature · 1 line
Sent from my mobile phone. Please pardon brevity and lack of formatting.