Skip to contentSkip to conversation

dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller

PATCH Superseded Alexandre Belloni 2 participants 3 messages Mar 22, 2018

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller

Add the Device Tree binding documentation for the Microsemi Ocelot interrupt controller that is part of the ICPU. It is connected directly to the MIPS core interrupt controller.

---
Changes since v1:
- none

 .../interrupt-controller/mscc,ocelot-icpu-intr.txt | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt new file +22 -0
new file mode 100644
index 000000000000..b47a8a02b17b
@@ -0,0 +1,22 @@
+Microsemi Ocelot SoC ICPU Interrupt Controller
+
+Required properties:
+
+- compatible : should be "mscc,ocelot-icpu-intr"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the CPU interrupt controller.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+		intc: interrupt-controller@70000070 {
+			compatible = "mscc,ocelot-icpu-intr";
+			reg = <0x70000070 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
Signature · 1 line
2.16.2
#1 lore raw

PATCH v2 2/2 irqchip: Add a driver for the Microsemi Ocelot controller

The Microsemi Ocelot SoC has a pretty simple IRQ controller in its ICPU block. Add a driver for it.

---
changes since v1:
- removed license in favor of SPDX tag
- reworked style as suggested by Thomas

 drivers/irqchip/Kconfig           |   5 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-mscc-ocelot.c | 109 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 drivers/irqchip/irq-mscc-ocelot.c
drivers/irqchip/Kconfig +5 -0
index d913aec85109..0270797765f9 100644
@@ -286,6 +286,11 @@ config IRQ_MXS
 	select IRQ_DOMAIN
 	select STMP_DEVICE
 
+config MSCC_OCELOT_IRQ
+	bool
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
+
 config MVEBU_GICP
 	bool
 
drivers/irqchip/Makefile +1 -0
index d27e3e3619e0..63d7bb434c33 100644
@@ -72,6 +72,7 @@ obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
+obj-$(CONFIG_MSCC_OCELOT_IRQ)		+= irq-mscc-ocelot.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
 obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
drivers/irqchip/irq-mscc-ocelot.c new file +109 -0

109 lines not on this page · raw message

Signature · 1 line
2.16.2
#2 lore raw

Re: [PATCH v2 2/2] irqchip: Add a driver for the Microsemi Ocelot controller

On Thu, 22 Mar 2018 13:55:42 +0000,
Alexandre Belloni wrote:

Hi Alexandre,

Quoted 120 lines

The Microsemi Ocelot SoC has a pretty simple IRQ controller in its ICPU block. Add a driver for it.

---
changes since v1:
- removed license in favor of SPDX tag
- reworked style as suggested by Thomas

 drivers/irqchip/Kconfig           |   5 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-mscc-ocelot.c | 109 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 drivers/irqchip/irq-mscc-ocelot.c
drivers/irqchip/Kconfig +5 -0
index d913aec85109..0270797765f9 100644
@@ -286,6 +286,11 @@ config IRQ_MXS
 	select IRQ_DOMAIN
 	select STMP_DEVICE
 
+config MSCC_OCELOT_IRQ
+	bool
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
+
 config MVEBU_GICP
 	bool
 
drivers/irqchip/Makefile +1 -0
index d27e3e3619e0..63d7bb434c33 100644
@@ -72,6 +72,7 @@ obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
+obj-$(CONFIG_MSCC_OCELOT_IRQ)		+= irq-mscc-ocelot.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
 obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
drivers/irqchip/irq-mscc-ocelot.c new file +70 -0
new file mode 100644
index 000000000000..c71094de3cbd
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi Ocelot IRQ controller driver
+ *
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/interrupt.h>
+
+#define ICPU_CFG_INTR_INTR_STICKY	0x10
+#define ICPU_CFG_INTR_INTR_ENA		0x18
+#define ICPU_CFG_INTR_INTR_ENA_CLR	0x1c
+#define ICPU_CFG_INTR_INTR_ENA_SET	0x20
+#define ICPU_CFG_INTR_DST_INTR_IDENT(x)	(0x38 + 0x4 * (x))
+#define ICPU_CFG_INTR_INTR_TRIGGER(x)	(0x5c + 0x4 * (x))
+
+#define OCELOT_NR_IRQ 24
+
+static void ocelot_irq_unmask(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct irq_chip_type *ct = irq_data_get_chip_type(data);
+	unsigned int mask = data->mask;
+	u32 val;
+
+	irq_gc_lock(gc);
+	val = irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(0)) |
+	      irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(1));
+	if (!(val & mask))
+		irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_STICKY);
+
+	*ct->mask_cache &= ~mask;
+	irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_ENA_SET);
+	irq_gc_unlock(gc);
+}
+
+static void ocelot_irq_handler(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_domain *d = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, 0);
+	u32 reg = irq_reg_readl(gc, ICPU_CFG_INTR_DST_INTR_IDENT(0));
+
+	chained_irq_enter(chip, desc);
+
+	while (reg) {
+		u32 hwirq = __fls(reg);
+
+		generic_handle_irq(irq_find_mapping(d, hwirq));
+		reg &= ~(BIT(hwirq));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int __init ocelot_irq_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	int parent_irq, ret;
+
+	domain = irq_domain_add_linear(node, OCELOT_NR_IRQ,
+				       &irq_generic_chip_ops, NULL);
+	if (!domain) {

drivers/irqchip/irq-mscc-ocelot.c line 80

Quoted 10 lines
drivers/irqchip/irq-mscc-ocelot.c new file +10 -0
+		pr_err("%s: unable to add irq domain\n", node->name);
+		return -ENOMEM;
+	}
+
+	ret = irq_alloc_domain_generic_chips(domain, OCELOT_NR_IRQ, 1,
+					     "icpu", handle_level_irq,
+					     0, 0, 0);
+	if (ret) {
+		pr_err("%s: unable to alloc irq domain gc\n", node->name);
+		return ret;

You're now leaking the allocated domain.

drivers/irqchip/irq-mscc-ocelot.c line 87

Quoted 7 lines
drivers/irqchip/irq-mscc-ocelot.c new file +7 -0
+	}
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	gc->reg_base = of_iomap(node, 0);
+	if (!gc->reg_base) {
+		pr_err("%s: unable to map resource\n", node->name);
+		return -ENOMEM;

And here the chip.

Quoted 4 lines
drivers/irqchip/irq-mscc-ocelot.c new file +4 -0
+	}
+
+	gc->chip_types[0].regs.ack = ICPU_CFG_INTR_INTR_STICKY;
+	gc->chip_types[0].regs.mask = ICPU_CFG_INTR_INTR_ENA_CLR;

drivers/irqchip/irq-mscc-ocelot.c line 101

Quoted 10 lines
drivers/irqchip/irq-mscc-ocelot.c new file +10 -0
+	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
+	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+	gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+
+	/* Mask and ack all interrupts */
+	irq_reg_writel(gc, 0, ICPU_CFG_INTR_INTR_ENA);
+	irq_reg_writel(gc, 0xffffffff, ICPU_CFG_INTR_INTR_STICKY);
+
+	parent_irq = irq_of_parse_and_map(node, 0);
+	if (!parent_irq)

and here the ioremap space. You could also check that parent is non-NULL early on, just in case...

Quoted 11 lines
drivers/irqchip/irq-mscc-ocelot.c new file +8 -0
+		return -EINVAL;
+
+	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
+					 domain);
+
+	return 0;
+}
+IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
Signature · 1 line
2.16.2

If you rework the error handling quickly, I'll queue this for 4.17. It is quite refreshing to see an irqchip with only 3 functions...

Thanks,

	M.
Signature · 1 line
Jazz is not dead, it just smell funny.