Skip to contentSkip to conversation

dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller

PATCH Applied Alexandre Belloni 2 participants 3 messages Mar 22, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller

Add the Device Tree binding documentation for the Microsemi Ocelot interrupt controller that is part of the ICPU. It is connected directly to the MIPS core interrupt controller.

---
Changes since v2:
- none

 .../interrupt-controller/mscc,ocelot-icpu-intr.txt | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt new file +22 -0
new file mode 100644
index 000000000000..b47a8a02b17b
@@ -0,0 +1,22 @@
+Microsemi Ocelot SoC ICPU Interrupt Controller
+
+Required properties:
+
+- compatible : should be "mscc,ocelot-icpu-intr"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the CPU interrupt controller.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+		intc: interrupt-controller@70000070 {
+			compatible = "mscc,ocelot-icpu-intr";
+			reg = <0x70000070 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
Signature · 1 line
2.16.2
#1 lore raw

PATCH v3 2/2 irqchip: Add a driver for the Microsemi Ocelot controller

The Microsemi Ocelot SoC has a pretty simple IRQ controller in its ICPU block. Add a driver for it.

---
Changes in v3:
- moved parent irq parsing to the top of init
- reworked error path

 drivers/irqchip/Kconfig           |   5 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-mscc-ocelot.c | 118 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 124 insertions(+)
 create mode 100644 drivers/irqchip/irq-mscc-ocelot.c
drivers/irqchip/Kconfig +5 -0
index d913aec85109..0270797765f9 100644
@@ -286,6 +286,11 @@ config IRQ_MXS
 	select IRQ_DOMAIN
 	select STMP_DEVICE
 
+config MSCC_OCELOT_IRQ
+	bool
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
+
 config MVEBU_GICP
 	bool
 
drivers/irqchip/Makefile +1 -0
index d27e3e3619e0..63d7bb434c33 100644
@@ -72,6 +72,7 @@ obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
+obj-$(CONFIG_MSCC_OCELOT_IRQ)		+= irq-mscc-ocelot.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
 obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
drivers/irqchip/irq-mscc-ocelot.c new file +118 -0

118 lines not on this page · raw message

Signature · 1 line
2.16.2
Applied
#2 lore raw

Re: [PATCH v3 2/2] irqchip: Add a driver for the Microsemi Ocelot controller

Quoted 10 lines · Alexandre Belloni

The Microsemi Ocelot SoC has a pretty simple IRQ controller in its ICPU block. Add a driver for it.

---
Changes in v3:
- moved parent irq parsing to the top of init
- reworked error path

Quoted 5 lines
 drivers/irqchip/Kconfig           |   5 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-mscc-ocelot.c | 118 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 124 insertions(+)
 create mode 100644 drivers/irqchip/irq-mscc-ocelot.c

Queued both patches for 4.17. Thanks for the quick turnaround.

	M.
Signature · 1 line
Jazz is not dead. It just smells funny...