armv8: dts: fsl-ls1043a: add sata node support
Subsystems (2)
PATCH v2 1/3 armv8: dts: fsl-ls1043a: add sata node support
Add sata node to support ls1043a.
---
v2:
-no changes
arch/arm/dts/fsl-ls1043a-qds.dtsi | 4 ++++ arch/arm/dts/fsl-ls1043a.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+), 0 deletions(-)
arch/arm/dts/fsl-ls1043a-qds.dtsi +4 -0
@@ -174,3 +174,7 @@ &lpuart0 { status = "okay"; }; + +&sata { + status = "okay"; +};
arch/arm/dts/fsl-ls1043a.dtsi +8 -0
@@ -287,5 +287,13 @@ ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + + sata: sata at 3200000 { + compatible = "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 4>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; }; };
Signature · 1 line
1.7.1
PATCH v2 2/3 scsi: ceva: add ls1043a soc support
Add ahci compatible support for ls1043a soc.
---
v2:
-move compatible to orginal position
-rebase from master
drivers/ata/sata_ceva.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/ata/sata_ceva.c +3 -0
@@ -88,6 +88,7 @@enum ceva_soc {CEVA_1V84 ,CEVA_LS1012A , +CEVA_LS1043A , };struct ceva_sata_priv {
@@ -114,6 +115,7 @@ static int ceva_init_sata(struct ceva_sata_priv *priv)break ;case CEVA_LS1012A : +case CEVA_LS1043A :writel (ECC_DIS_ADDR_CH2 ,ECC_DIS_VAL_CH2 );writel (CEVA_PHY1_CFG , base +AHCI_VEND_PPCFG );writel (CEVA_TRANS_CFG , base +AHCI_VEND_PTC );
@@ -144,6 +146,7 @@ static int sata_ceva_probe(struct udevice *dev)static const struct udevice_id sata_ceva_ids[] = { { .compatible ="ceva,ahci-1v84" , .data =CEVA_1V84 }, { .compatible ="fsl,ls1012a-ahci" , .data =CEVA_LS1012A }, + { .compatible ="fsl,ls1043a-ahci" , .data =CEVA_LS1043A }, { } };
Signature · 1 line
1.7.1
PATCH v2 3/3 arm64: ls1043aqds: enable DM support for sata
In reply to Peng MaEnable related configs to support sata DM feature.
---
v2:
-no changes
configs/ls1043aqds_defconfig | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
configs/ls1043aqds_defconfig +5 -0
@@ -48,3 +48,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_BLK=y CONFIG_DM_MMC=y +CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
Signature · 1 line
1.7.1
PATCH v2 3/3 arm64: ls1043aqds: enable DM support for sata
Quoted 16 lines · Peng Ma
Enable related configs to support sata DM feature.
Signed-off-by Peng Ma <[email protected]>---
v2:
-no changesconfigs/ls1043aqds_defconfig | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)configs/ls1043aqds_defconfig +0
-0
configs/ls1043aqds_defconfig CONFIG_USB_XHCI_DWC3=y · line 55
Quoted 8 lines
configs/ls1043aqds_defconfig +5
-0@@ -48,3 +48,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_BLK=y CONFIG_DM_MMC=y +CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
Peng,
I noticed your code base seems to have CONFIG_BLK=y. However upstream code doesn't have this option enabled. I can add it for you, but I am afraid I may miss other things you have locally. Please rebase your patch and confirm SATA works as you expected.
York
PATCH v2 3/3 arm64: ls1043aqds: enable DM support for sata
Hi york,
This patch depend on https://patchwork.ozlabs.org/patch/941093/ , At V2 review I forgot to write depend on. Could I add "depend on" in My patch at V3 or not?
Best regards
Peng Ma
-----Original Message-----
From: York Sun
Sent: 2018年8月8日 5:44
To: Peng Ma <[email protected]>
Cc: albert.u.boot at aribaud.net; Mingkai Hu <[email protected]>; Pankaj Bansal <[email protected]>; Fabio Estevam <[email protected]>; Yinbo Zhu <[email protected]>; michal.simek at xilinx.com; sjg at chromium.org; Andy Tang <[email protected]>; u-boot at lists.denx.de
Subject: Re: [PATCH 3/3,v2] arm64: ls1043aqds: enable DM support for sata
Quoted 17 lines · Peng Ma
Enable related configs to support sata DM feature.
Signed-off-by Peng Ma <[email protected]>---
v2:
-no changesconfigs/ls1043aqds_defconfig | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)(quoted diff) +0
-0b/configs/ls1043aqds_defconfig index 73f7f8a..5510509 100644
configs/ls1043aqds_defconfig +0
-0@@ -48,3 +48,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y
CONFIG_BLK=yCONFIG_DM_MMC=y
configs/ls1043aqds_defconfig CONFIG_USB_XHCI_DWC3=y · line 55
Quoted 5 lines
configs/ls1043aqds_defconfig +5
-0+CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
Peng,
I noticed your code base seems to have CONFIG_BLK=y. However upstream code doesn't have this option enabled. I can add it for you, but I am afraid I may miss other things you have locally. Please rebase your patch and confirm SATA works as you expected.
York
PATCH v2 3/3 arm64: ls1043aqds: enable DM support for sata
Quoted 4 lines · Peng Ma
Hi york,
This patch depend on https://patchwork.ozlabs.org/patch/941093/ , At V2 review I forgot to write depend on. Could I add "depend on" in My patch at V3 or not?
Do not send another version just to explain the dependency, since I know it now.
York
PATCH v2 3/3 arm64: ls1043aqds: enable DM support for sata
-----Original Message-----
From: York Sun
Sent: 2018年8月8日 10:00
To: Peng Ma <[email protected]>
Cc: albert.u.boot at aribaud.net; Mingkai Hu <[email protected]>; Pankaj Bansal <[email protected]>; Fabio Estevam <[email protected]>; Yinbo Zhu <[email protected]>; michal.simek at xilinx.com; sjg at chromium.org; Andy Tang <[email protected]>; u-boot at lists.denx.de
Subject: Re: [PATCH 3/3,v2] arm64: ls1043aqds: enable DM support for sata
Quoted 4 lines · Peng Ma
Hi york,
This patch depend on https://patchwork.ozlabs.org/patch/941093/ , At V2 review I forgot to write depend on. Could I add "depend on" in My patch at V3 or not?
Do not send another version just to explain the dependency, since I know it now.
York
OK, THANKS
Peng
PATCH v2 1/3 armv8: dts: fsl-ls1043a: add sata node support
In reply to Peng MaQuoted 6 lines · Peng Ma
Add sata node to support ls1043a.
Signed-off-by Peng Ma <[email protected]>---
v2:
-no changes
This patch set has been applied to fsl-qoriq master, awaiting upstream. Thanks.
York