pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices
Subsystems (2)
PATCH 1/1 pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices
The second PWM controller on Cherry Trail devices uses a separate ACPI
HID: "80862289", add this so that the driver will properly bind to the second PWM controller.
The second PWM controller is usually not used, the main thing gained by this is properly putting the PWM controller in D3 on suspend.
Signed-off-by Hans de Goede <[email protected]>
--- drivers/pwm/pwm-lpss-platform.c | 1 + 1 file changed, 1 insertion(+)
drivers/pwm/pwm-lpss-platform.c +1 -0
@@ -81,6 +81,7 @@ static SIMPLE_DEV_PM_OPS(pwm_lpss_platform_pm_ops,static const struct acpi_device_id pwm_lpss_acpi_match[] = { {"80860F09" , (unsigned long )&pwm_lpss_byt_info }, {"80862288" , (unsigned long )&pwm_lpss_bsw_info }, + {"80862289" , (unsigned long )&pwm_lpss_bsw_info }, {"80865AC8" , (unsigned long )&pwm_lpss_bxt_info }, { }, };
Signature · 1 line
2.18.0
Quoted 7 lines · Hans de Goede
The second PWM controller on Cherry Trail devices uses a separate ACPI
HID: "80862289", add this so that the driver will properly bind to the second PWM controller.The second PWM controller is usually not used, the main thing gained by this is properly putting the PWM controller in D3 on suspend.
Reviewed-by Andy Shevchenko <[email protected]>
Quoted 20 lines
Signed-off-by Hans de Goede <[email protected]>--- drivers/pwm/pwm-lpss-platform.c | 1 + 1 file changed, 1 insertion(+)drivers/pwm/pwm-lpss-platform.c +1
-0@@ -81,6 +81,7 @@ static SIMPLE_DEV_PM_OPS(pwm_lpss_platform_pm_ops,static const struct acpi_device_id pwm_lpss_acpi_match[] = { {"80860F09" , (unsigned long )&pwm_lpss_byt_info }, {"80862288" , (unsigned long )&pwm_lpss_bsw_info }, + {"80862289" , (unsigned long )&pwm_lpss_bsw_info }, {"80865AC8" , (unsigned long )&pwm_lpss_bxt_info }, { }, };Signature · 1 line
2.18.0
Signature · 2 lines
With Best Regards, Andy Shevchenko