Skip to contentSkip to conversation

ASoC: rsnd: ssi: Request dedicated dma channels for busif0 to 7

PATCH Superseded [email protected] 2 participants 3 messages Oct 3, 2018 – Oct 4, 2018

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 8/9 ASoC: rsnd: ssi: Request dedicated dma channels for busif0 to 7

From: Jiada Wang <[email protected]>

Currently ssi driver only request dma channel for SSI_0, which is used to transfer data to/from busif0.

But in GEN3 busif1 to busif7 also maybe used, dedicated dma channels are requested for data transfer through these busif.

---
 sound/soc/sh/rcar/ssi.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)
sound/soc/sh/rcar/ssi.c +23 -5
index 3adcc4f778f7..992aeac09e76 100644
@@ -76,6 +76,8 @@
 
 #define SSI_NAME "ssi"
 
+#define SSI_DMA_NAME_SIZE	10
+
 struct rsnd_ssi {
 	struct rsnd_mod mod;
 
@@ -938,12 +940,28 @@ static struct dma_chan *rsnd_ssi_dma_req(struct rsnd_dai_stream *io,
 {
 	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
 	int is_play = rsnd_io_is_play(io);
-	char *name;
+	char name[SSI_DMA_NAME_SIZE];
 
-	if (rsnd_ssi_use_busif(io))
-		name = is_play ? "rxu" : "txu";
-	else
-		name = is_play ? "rx" : "tx";
+	if (rsnd_ssi_use_busif(io)) {
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rxu");
+		else
+			snprintf(name, SSI_DMA_NAME_SIZE, "txu");
+
+		if (rsnd_is_gen3(priv)) {
+			/*
+			 * Gen3 supports to use all available BUSIF
+			 */
+			int busif = rsnd_ssi_get_busif(io);
+
+			snprintf(name, SSI_DMA_NAME_SIZE, "%s%d", name, busif);
+		}
+	} else {
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rx");
+		else
+			snprintf(name, SSI_DMA_NAME_SIZE, "tx");
+	}
 
 	return rsnd_dma_request_channel(rsnd_ssi_of_node(priv),
 					mod, name);
Signature · 1 line
2.17.0
#1 lore raw

Hi Jiada

Thank you for your patch

Quoted 8 lines

Currently ssi driver only request dma channel for SSI_0, which is used to transfer data to/from busif0.

But in GEN3 busif1 to busif7 also maybe used, dedicated dma channels are requested for data transfer through these busif.

---

(snip)

Quoted 4 lines
sound/soc/sh/rcar/ssi.c +4 -0
+	if (rsnd_ssi_use_busif(io)) {
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rxu");
+		else

sound/soc/sh/rcar/ssi.c static struct dma_chan *rsnd_ssi_dma_req(struct rsnd_dai_stream *io, · line 958

Quoted 10 lines
sound/soc/sh/rcar/ssi.c +10 -0
+			snprintf(name, SSI_DMA_NAME_SIZE, "txu");
+
+		if (rsnd_is_gen3(priv)) {
+			/*
+			 * Gen3 supports to use all available BUSIF
+			 */
+			int busif = rsnd_ssi_get_busif(io);
+
+			snprintf(name, SSI_DMA_NAME_SIZE, "%s%d", name, busif);
+		}

I think unspecified GenX is better idea.
For example, we might want to have same setting on Gen2 in the future. (and this is not Gen3 HW specific feature
But yes, we have SW side reason)

How about like this ?
We can keep compatibility, and both Gen2/Gen3 can use it.

	if (rsnd_ssi_use_busif(io)) {
		/*
		 * 1) try to find txu%d/rxu%d first
		 * 2) If can't find it, try to find old txu/rxu
		 */
	}
author
#2 lore raw

Hi Morimoto-san

Quoted 35 lines · Kuninori Morimoto

Hi Jiada

Thank you for your patch

Quoted 8 lines

Currently ssi driver only request dma channel for SSI_0, which is used to transfer data to/from busif0.

But in GEN3 busif1 to busif7 also maybe used, dedicated dma channels are requested for data transfer through these busif.

---

(snip)

Quoted 4 lines
sound/soc/sh/rcar/ssi.c +4 -0
+	if (rsnd_ssi_use_busif(io)) {
+		if (is_play)
+			snprintf(name, SSI_DMA_NAME_SIZE, "rxu");
+		else

sound/soc/sh/rcar/ssi.c static struct dma_chan *rsnd_ssi_dma_req(struct rsnd_dai_stream *io, · line 958

Quoted 10 lines
sound/soc/sh/rcar/ssi.c +10 -0
+			snprintf(name, SSI_DMA_NAME_SIZE, "txu");
+
+		if (rsnd_is_gen3(priv)) {
+			/*
+			 * Gen3 supports to use all available BUSIF
+			 */
+			int busif = rsnd_ssi_get_busif(io);
+
+			snprintf(name, SSI_DMA_NAME_SIZE, "%s%d", name, busif);
+		}

I think unspecified GenX is better idea.
For example, we might want to have same setting on Gen2 in the future. (and this is not Gen3 HW specific feature
But yes, we have SW side reason)

How about like this ?
We can keep compatibility, and both Gen2/Gen3 can use it.

Quoted 6 lines
	if (rsnd_ssi_use_busif(io)) {
		/*
		 * 1) try to find txu%d/rxu%d first
		 * 2) If can't find it, try to find old txu/rxu
		 */
	}

I think this is a good idea, by doing so,
in case GEN2 DT also starts to support different BUSIF, then no driver side change is required.

I will update accordingly in next version

Thanks,
Jiada