Fixing record/replay and adding reverse debugging
v8 cover Fixing record/replay and adding reverse debugging
GDB remote protocol supports reverse debugging of the targets. It includes 'reverse step' and 'reverse continue' operations. The first one finds the previous step of the execution, and the second one is intended to stop at the last breakpoint that would happen when the program is executed normally.
Reverse debugging is possible in the replay mode, when at least one snapshot was created at the record or replay phase. QEMU can use these snapshots for travelling back in time with GDB.
Running the execution in replay mode allows using GDB reverse debugging commands:
- reverse-stepi (or rsi): Steps one instruction to the past. QEMU loads on of the prior snapshots and proceeds to the desired instruction forward. When that step is reaches, execution stops.
- reverse-continue (or rc): Runs execution "backwards". QEMU tries to find breakpoint or watchpoint by loaded prior snapshot and replaying the execution. Then QEMU loads snapshots again and replays to the latest breakpoint. When there are no breakpoints in the examined section of the execution, QEMU finds one more snapshot and tries again. After the first snapshot is processed, execution stops at this snapshot.
The set of patches include the following modifications:
- gdbstub update for reverse debugging support
- functions that automatically perform reverse step and reverse continue operations
- hmp/qmp commands for manipulating the replay process
- improvement of the snapshotting for saving the execution step in the snapshot parameters
- other record/replay fixes
The patches are available in the repository:
https://github.com/ispras/qemu/tree/rr-181218
v8 changes:
- rebased to the new master
- added missing fix for prior rr patch
- updated 'since' version number in json-related patches
v7 changes:
- rebased to the new master with upstreamed patches from the series
- several improvements in hmp/qmp commands handling (suggested by Markus Armbruster)
- fixed record/replay with '-rtc base' option enabled
- added document with virtual hardware requirements
v6 changes:
- rebased to the new version of master
- fixed build of linux-user configurations
- added new clock for slirp and vnc timers
v5 changes:
- multiple fixes of record/replay bugs appeared after QEMU core update
- changed reverse debugging to 'since 3.1'
v4 changes:
- changed 'since 2.13' to 'since 3.0' in json (as suggested by Eric Blake)
v3 changes:
- Fixed PS/2 bug with save/load vm, which caused failures of the replay.
- Rebased to the new code base.
- Minor fixes.
v2 changes:
- documented reverse debugging
- fixed start vmstate loading in record mode
- documented qcow2 changes (as suggested by Eric Blake)
- made icount SnapshotInfo field optional (as suggested by Eric Blake)
- renamed qmp commands (as suggested by Eric Blake)
- minor changes
---
Pavel Dovgalyuk (19):
block: implement bdrv_snapshot_goto for blkreplay
replay: disable default snapshot for record/replay
replay: update docs for record/replay with block devices
replay: don't drain/flush bdrv queue while RR is working
replay: finish record/replay before closing the disks
qcow2: introduce icount field for snapshots
migration: introduce icount field for snapshots
replay: provide and accessor for rr filename
replay: introduce info hmp/qmp command
replay: introduce breakpoint at the specified step
replay: implement replay-seek command to proceed to the desired step
replay: refine replay-time module
replay: flush rr queue before loading the vmstate
gdbstub: add reverse step support in replay mode
gdbstub: add reverse continue support in replay mode
replay: describe reverse debugging in docs/replay.txt
replay: add BH oneshot event for block layer
replay: init rtc after enabling the replay
replay: document development rules
[email protected] (1):
replay: add missing fix for internal function
accel/tcg/translator.c | 1 block/blkreplay.c | 8 + block/block-backend.c | 5 - block/io.c | 22 +++ block/qapi.c | 18 ++- block/qcow2-snapshot.c | 9 + block/qcow2.h | 2 blockdev.c | 10 + cpus.c | 19 ++- docs/devel/replay.txt | 45 ++++++ docs/interop/qcow2.txt | 4 + docs/replay.txt | 45 ++++++ exec.c | 6 + gdbstub.c | 50 +++++++ hmp-commands-info.hx | 14 ++ hmp-commands.hx | 44 ++++++ hmp.h | 4 + include/block/snapshot.h | 1 include/sysemu/replay.h | 20 +++ migration/savevm.c | 9 + qapi/block-core.json | 7 + qapi/block.json | 3 qapi/misc.json | 82 ++++++++++++ replay/Makefile.objs | 3 replay/replay-debugging.c | 319 +++++++++++++++++++++++++++++++++++++++++++++ replay/replay-events.c | 16 ++ replay/replay-internal.c | 2 replay/replay-internal.h | 7 + replay/replay-time.c | 32 ++--- replay/replay.c | 26 ++++ stubs/Makefile.objs | 1 stubs/replay-user.c | 9 + stubs/replay.c | 10 + vl.c | 21 ++- 34 files changed, 826 insertions(+), 48 deletions(-) create mode 100644 docs/devel/replay.txt create mode 100644 replay/replay-debugging.c create mode 100644 stubs/replay-user.c
Signature · 1 line
Pavel Dovgalyuk
PATCH v8 1/20 replay: add missing fix for internal function
From: [email protected] <[email protected]>
This is a fix which was missed by patch 74c0b816adfc6aa1b01b4426fdf385e32e35cbac, which added current_step parameter to the replay_advance_current_step function.
--- replay/replay-internal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
replay/replay-internal.c +1 -1
@@ -229,7 +229,7 @@ void replay_mutex_unlock(void)void replay_advance_current_step (uint64_t current_step) { -int diff = (int )(replay_get_current_step () - replay_state.current_step); +int diff = (int )(current_step - replay_state.current_step);/* Time can only go forward */ assert (diff >=0 );
PATCH v8 2/20 block: implement bdrv_snapshot_goto for blkreplay
In reply to Pavel DovgalyukFrom: Pavel Dovgalyuk <[email protected]>
This patch enables making snapshots with blkreplay used in block devices.
This function is required to make bdrv_snapshot_goto without calling .bdrv_open which is not implemented.
--- block/blkreplay.c | 8 ++++++++ 1 file changed, 8 insertions(+)
block/blkreplay.c +8 -0
@@ -126,6 +126,12 @@ static int coroutine_fn blkreplay_co_flush(BlockDriverState *bs)return ret; } +static int blkreplay_snapshot_goto (BlockDriverState *bs, +const char *snapshot_id) +{ +return bdrv_snapshot_goto (bs->file->bs, snapshot_id,NULL ); +} +static BlockDriver bdrv_blkreplay = { .format_name ="blkreplay" , .instance_size =0 ,
@@ -140,6 +146,8 @@ static BlockDriver bdrv_blkreplay = { .bdrv_co_pwrite_zeroes = blkreplay_co_pwrite_zeroes, .bdrv_co_pdiscard = blkreplay_co_pdiscard, .bdrv_co_flush = blkreplay_co_flush, + + .bdrv_snapshot_goto = blkreplay_snapshot_goto, };static void bdrv_blkreplay_init (void )
PATCH v8 3/20 replay: disable default snapshot for record/replay
In reply to Pavel DovgalyukFrom: Pavel Dovgalyuk <[email protected]>
This patch disables setting '-snapshot' option on by default in record/replay mode. This is needed for creating vmstates in record and replay modes.
--- vl.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
vl.c +8 -2
@@ -3170,7 +3170,13 @@ int main(int argc, char **argv, char **envp)drive_add (IF_PFLASH ,-1 , optarg,PFLASH_OPTS );break ;case QEMU_OPTION_snapshot: - snapshot =1 ; + { +Error *blocker =NULL ; + snapshot =1 ; +error_setg (&blocker,QERR_REPLAY_NOT_SUPPORTED , +"-snapshot" ); +replay_add_blocker (blocker); + }break ;case QEMU_OPTION_numa: opts = qemu_opts_parse_noisily(qemu_find_opts("numa"),
@@ -4446,7 +4452,7 @@ int main(int argc, char **argv, char **envp)qapi_free_BlockdevOptions (bdo->bdo);g_free (bdo); } -if (snapshot || replay_mode !=REPLAY_MODE_NONE ) { +if (snapshot) {qemu_opts_foreach (qemu_find_opts ("drive" ), drive_enable_snapshot,NULL ,NULL ); }
PATCH v8 4/20 replay: update docs for record/replay with block devices
In reply to Pavel DovgalyukThis patch updates the description of the command lines for using record/replay with attached block devices.
--- docs/replay.txt | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
docs/replay.txt +9 -3
@@ -27,7 +27,7 @@ Usage of the record/replay: * First, record the execution with the following command line: qemu-system-i386 \ -icount shift=7,rr=record,rrfile=replay.bin \ - -drive file=disk.qcow2,if=none,id=img-direct \ + -drive file=disk.qcow2,if=none,snapshot,id=img-direct \ -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay \ -device ide-hd,drive=img-blkreplay \ -netdev user,id=net1 -device rtl8139,netdev=net1 \
@@ -35,7 +35,7 @@ Usage of the record/replay: * After recording, you can replay it by using another command line: qemu-system-i386 \ -icount shift=7,rr=replay,rrfile=replay.bin \ - -drive file=disk.qcow2,if=none,id=img-direct \ + -drive file=disk.qcow2,if=none,snapshot,id=img-direct \ -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay \ -device ide-hd,drive=img-blkreplay \ -netdev user,id=net1 -device rtl8139,netdev=net1 \
@@ -223,7 +223,7 @@ Block devices record/replay module intercepts calls of bdrv coroutine functions at the top of block drivers stack. To record and replay block operations the drive must be configured as following: - -drive file=disk.qcow2,if=none,id=img-direct + -drive file=disk.qcow2,if=none,snapshot,id=img-direct -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay -device ide-hd,drive=img-blkreplay
@@ -252,6 +252,12 @@ This snapshot is created at start of recording and restored at start of replaying. It also can be loaded while replaying to roll back the execution. +'snapshot' flag of the disk image must be removed to save the snapshots +in the overlay (or original image) instead of using the temporary overlay. + -drive file=disk.ovl,if=none,id=img-direct + -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay + -device ide-hd,drive=img-blkreplay + Use QEMU monitor to create additional snapshots. 'savevm <name>' command created the snapshot and 'loadvm <name>' restores it. To prevent corruption of the original disk image, use overlay files linked to the original images.
PATCH v8 5/20 replay: don't drain/flush bdrv queue while RR is working
In reply to Pavel DovgalyukIn record/replay mode bdrv queue is controlled by replay mechanism. It does not allow saving or loading the snapshots
when bdrv queue is not empty. Stopping the VM is not blocked by nonempty queue, but flushing the queue is still impossible there, because it may cause deadlocks in replay mode.
This patch disables bdrv_drain_all and bdrv_flush_all in record/replay mode.
--- block/io.c | 22 ++++++++++++++++++++++ cpus.c | 2 -- 2 files changed, 22 insertions(+), 2 deletions(-)
block/io.c +22 -0
@@ -32,6 +32,7 @@#include "qemu/cutils.h" #include "qapi/error.h" #include "qemu/error-report.h" +#include "sysemu/replay.h" #define NOT_DONE 0x7fffffff/* used while emulated sync operation in progress */
@@ -538,6 +539,13 @@ void bdrv_drain_all_begin(void)return ; } +/* bdrv queue is managed by record/replay, +waiting for finishing the I/O requests may +be infinite */ +if (replay_events_enabled ()) { +return ; + } +/* AIO_WAIT_WHILE() with a NULL context can only be called from the main * loop AioContext, so make sure we're in the main context. */ assert (qemu_get_current_aio_context () ==qemu_get_aio_context ());
@@ -566,6 +574,13 @@ void bdrv_drain_all_end(void) {BlockDriverState *bs =NULL ; +/* bdrv queue is managed by record/replay, +waiting for finishing the I/O requests may +be endless */ +if (replay_events_enabled ()) { +return ; + } +while ((bs =bdrv_next_all_states (bs))) {AioContext *aio_context =bdrv_get_aio_context (bs);
@@ -1997,6 +2012,13 @@ int bdrv_flush_all(void)BlockDriverState *bs =NULL ;int result =0 ; +/* bdrv queue is managed by record/replay, +creating new flush request for stopping +the VM may break the determinism */ +if (replay_events_enabled ()) { +return result; + } +for (bs =bdrv_first (&it); bs; bs =bdrv_next (&it)) {AioContext *aio_context =bdrv_get_aio_context (bs);int ret;
cpus.c +0 -2
@@ -1078,7 +1078,6 @@ static int do_vm_stop(RunState state, bool send_stop) }bdrv_drain_all (); -replay_disable_events (); ret =bdrv_flush_all ();return ret;
@@ -2148,7 +2147,6 @@ int vm_prepare_start(void)/* We are sending this now, but the CPUs will be resumed shortly later */ qapi_event_send_resume (); -replay_enable_events ();cpu_enable_ticks ();runstate_set (RUN_STATE_RUNNING );vm_state_notify (1 ,RUN_STATE_RUNNING );
PATCH v8 6/20 replay: finish record/replay before closing the disks
In reply to Pavel DovgalyukAfter recent updates block devices cannot be closed on qemu exit. This happens due to the block request polling when replay is not finished. Therefore now we stop execution recording before closing the block devices.
--- replay/replay.c | 2 ++ vl.c | 1 + 2 files changed, 3 insertions(+)
replay/replay.c +2 -0
@@ -385,6 +385,8 @@ void replay_finish(void)g_free (replay_snapshot); replay_snapshot =NULL ; + replay_mode =REPLAY_MODE_NONE ; +replay_finish_events (); }
vl.c +1 -0
@@ -4652,6 +4652,7 @@ int main(int argc, char **argv, char **envp)/* No more vcpu or device emulation activity beyond this point */ vm_shutdown (); +replay_finish ();job_cancel_sync_all ();bdrv_close_all ();
PATCH v8 7/20 qcow2: introduce icount field for snapshots
In reply to Pavel DovgalyukThis patch introduces the icount field for saving within the snapshot. It is required for navigation between the snapshots in record/replay mode.
--
v2:
- documented format changes in docs/interop/qcow2.txt (suggested by Eric Blake)
--- block/qcow2-snapshot.c | 7 +++++++ block/qcow2.h | 2 ++ docs/interop/qcow2.txt | 4 ++++ 3 files changed, 13 insertions(+)
block/qcow2-snapshot.c +7 -0
@@ -103,6 +103,12 @@ int qcow2_read_snapshots(BlockDriverState *bs) sn->disk_size = bs->total_sectors *BDRV_SECTOR_SIZE ; } +if (extra_data_size >=24 ) { + sn->icount =be64_to_cpu (extra.icount); + }else { + sn->icount =-1ULL ; + } +/* Read snapshot ID */ sn->id_str =g_malloc (id_str_size +1 ); ret =bdrv_pread (bs->file, offset, sn->id_str, id_str_size);
@@ -209,6 +215,7 @@ static int qcow2_write_snapshots(BlockDriverState *bs)memset (&extra,0 ,sizeof (extra)); extra.vm_state_size_large =cpu_to_be64 (sn->vm_state_size); extra.disk_size =cpu_to_be64 (sn->disk_size); + extra.icount =cpu_to_be64 (sn->icount); id_str_size =strlen (sn->id_str); name_size =strlen (sn->name);
block/qcow2.h +2 -0
@@ -159,6 +159,7 @@ typedef struct QEMU_PACKED QCowSnapshotHeader { typedef struct QEMU_PACKED QCowSnapshotExtraData {uint64_t vm_state_size_large;uint64_t disk_size; +uint64_t icount; } QCowSnapshotExtraData;
@@ -172,6 +173,7 @@ typedef struct QCowSnapshot {uint32_t date_sec;uint32_t date_nsec;uint64_t vm_clock_nsec; +uint64_t icount; } QCowSnapshot;struct Qcow2Cache ;
docs/interop/qcow2.txt +4 -0
@@ -540,6 +540,10 @@ Snapshot table entry: Byte 48 - 55: Virtual disk size of the snapshot in bytes + Byte 56 - 63: icount value which corresponds to + the record/replay step when the snapshot + was taken + Version 3 images must include extra data at least up to byte 55.
PATCH v8 8/20 migration: introduce icount field for snapshots
In reply to Pavel DovgalyukSaving icount as a parameters of the snapshot allows navigation between them in the execution replay scenario.
This information can be used for finding a specific snapshot for rewinding the recorded execution to the specific moment of the time. E.g., 'reverse step' action needs to load the nearest snapshot which is prior to the current moment of time .
--
v2:
- made icount in SnapshotInfo optional (suggested by Eric Blake)
v7:
- added more comments for icount member (suggested by Markus Armbruster)
--- block/qapi.c | 18 ++++++++++++++---- block/qcow2-snapshot.c | 2 ++ blockdev.c | 10 ++++++++++ include/block/snapshot.h | 1 + migration/savevm.c | 5 +++++ qapi/block-core.json | 7 ++++++- qapi/block.json | 3 ++- 7 files changed, 40 insertions(+), 6 deletions(-)
block/qapi.c +14 -4
@@ -210,6 +210,8 @@ int bdrv_query_snapshot_info_list(BlockDriverState *bs, info->date_nsec = sn_tab[i].date_nsec; info->vm_clock_sec = sn_tab[i].vm_clock_nsec /1000000000 ; info->vm_clock_nsec = sn_tab[i].vm_clock_nsec %1000000000 ; + info->icount = sn_tab[i].icount; + info->has_icount = sn_tab[i].icount !=-1ULL ; info_list =g_new0 (SnapshotInfoList,1 ); info_list->value = info;
@@ -663,14 +665,15 @@ void bdrv_snapshot_dump(fprintf_function func_fprintf, void *f, QEMUSnapshotInfo *sn) {char buf1[128 ], date_buf[128 ], clock_buf[128 ]; +char icount_buf[128 ] = {0 };struct tm tm;time_t ti;int64_t secs;if (!sn) {func_fprintf (f, -"%-10s%-20s%7s%20s%15s" , -"ID" ,"TAG" ,"VM SIZE" ,"DATE" ,"VM CLOCK" ); +"%-10s%-18s%7s%20s%13s%11s" , +"ID" ,"TAG" ,"VM SIZE" ,"DATE" ,"VM CLOCK" ,"ICOUNT" ); }else { ti = sn->date_sec;localtime_r (&ti, &tm);
@@ -683,13 +686,18 @@ void bdrv_snapshot_dump(fprintf_function func_fprintf, void *f, (int )((secs /60 ) %60 ), (int )(secs %60 ), (int)((sn->vm_clock_nsec / 1000000) % 1000)); +if (sn->icount !=-1ULL ) { +snprintf (icount_buf,sizeof (icount_buf), +"%" PRId64, sn->icount); + }func_fprintf (f, -"%-10s%-20s%7s%20s%15s" , +"%-10s%-18s%7s%20s%13s%11s" , sn->id_str, sn->name,get_human_readable_size (buf1,sizeof (buf1), sn->vm_state_size), date_buf, - clock_buf); + clock_buf, + icount_buf); } }
@@ -857,6 +865,8 @@ void bdrv_image_info_dump(fprintf_function func_fprintf, void *f, .date_nsec = elem->value->date_nsec, .vm_clock_nsec = elem->value->vm_clock_sec *1000000000ULL + elem->value->vm_clock_nsec, + .icount = elem->value->has_icount ? + elem->value->icount : -1ULL, };pstrcpy (sn.id_str,sizeof (sn.id_str), elem->value->id);
block/qcow2-snapshot.c +2 -0
@@ -379,6 +379,7 @@ int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) sn->date_sec = sn_info->date_sec; sn->date_nsec = sn_info->date_nsec; sn->vm_clock_nsec = sn_info->vm_clock_nsec; + sn->icount = sn_info->icount;/* Allocate the L1 table of the snapshot and copy the current one there. */ l1_table_offset =qcow2_alloc_clusters (bs, s->l1_size *sizeof (uint64_t ));
@@ -698,6 +699,7 @@ int qcow2_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab) sn_info->date_sec = sn->date_sec; sn_info->date_nsec = sn->date_nsec; sn_info->vm_clock_nsec = sn->vm_clock_nsec; + sn_info->icount = sn->icount; } *psn_tab = sn_tab;return s->nb_snapshots;
blockdev.c +10 -0
@@ -57,6 +57,7 @@#include "block/trace.h" #include "sysemu/arch_init.h" #include "sysemu/qtest.h" +#include "sysemu/replay.h" #include "qemu/cutils.h" #include "qemu/help_option.h" #include "qemu/throttle-options.h"
@@ -1241,6 +1242,10 @@ SnapshotInfo *qmp_blockdev_snapshot_delete_internal_sync(const char *device, info->vm_state_size = sn.vm_state_size; info->vm_clock_nsec = sn.vm_clock_nsec %1000000000 ; info->vm_clock_sec = sn.vm_clock_nsec /1000000000 ; +if (sn.icount !=-1ULL ) { + info->icount = sn.icount; + info->has_icount = true; + }return info;
@@ -1449,6 +1454,11 @@ static void internal_snapshot_prepare(BlkActionState *common, sn->date_sec = tv.tv_sec; sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +if (replay_mode !=REPLAY_MODE_NONE ) { + sn->icount =replay_get_current_step (); + }else { + sn->icount =-1ULL ; + } ret1 =bdrv_snapshot_create (bs, sn);if (ret1 <0 ) {
include/block/snapshot.h +1 -0
@@ -42,6 +42,7 @@ typedef struct QEMUSnapshotInfo {uint32_t date_sec;/* UTC date of the snapshot */ uint32_t date_nsec;uint64_t vm_clock_nsec;/* VM clock relative to boot */ +uint64_t icount;/* record/replay step */ } QEMUSnapshotInfo; int bdrv_snapshot_find(BlockDriverState *bs, QEMUSnapshotInfo *sn_info,
migration/savevm.c +5 -0
@@ -2509,6 +2509,11 @@ int save_snapshot(const char *name, Error **errp) sn->date_sec = tv.tv_sec; sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +if (replay_mode !=REPLAY_MODE_NONE ) { + sn->icount =replay_get_current_step (); + }else { + sn->icount =-1ULL ; + }if (name) { ret =bdrv_snapshot_find (bs, old_sn, name);
qapi/block-core.json +6 -1
@@ -26,13 +26,18 @@ # # @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec # +# @icount: Current instruction count. Appears when execution record/replay +# is enabled. Used for "time-traveling" to match the moment +# in the recorded execution with the snapshots (since 4.0) +# # Since: 1.3 # ## { 'struct': 'SnapshotInfo', 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', 'date-sec': 'int', 'date-nsec': 'int', - 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } } + 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int', + '*icount': 'int' } } ## # @ImageInfoSpecificQCow2EncryptionBase:
qapi/block.json +2 -1
@@ -176,7 +176,8 @@ # "date-sec": 1000012, # "date-nsec": 10, # "vm-clock-sec": 100, -# "vm-clock-nsec": 20 +# "vm-clock-nsec": 20, +# "icount": 220414 # } # } #
PATCH v8 9/20 replay: provide and accessor for rr filename
In reply to Pavel DovgalyukThis patch adds an accessor function for the name of the record/replay log file. Adding an accessor instead of making variable global, prevents accidental modification of this variable by other modules.
--- include/sysemu/replay.h | 2 ++ replay/replay.c | 5 +++++ 2 files changed, 7 insertions(+)
include/sysemu/replay.h +2 -0
@@ -71,6 +71,8 @@ void replay_start(void);void replay_finish (void );/*! Adds replay blocker with the specified error description */ void replay_add_blocker (Error *reason); +/* Returns name of the replay log file */ +const char *replay_get_filename (void );/* Processing the instructions */
replay/replay.c +5 -0
@@ -394,3 +394,8 @@ void replay_add_blocker(Error *reason) { replay_blockers =g_slist_prepend (replay_blockers, reason); } + +const char *replay_get_filename (void ) +{ +return replay_filename; +}
PATCH v8 10/20 replay: introduce info hmp/qmp command
In reply to Pavel DovgalyukThis patch introduces 'info replay' monitor command and corresponding qmp request.
These commands request the current record/replay mode, replay log file name, and the execution step (number or recorded/replayed instructions). User may use step number for replay_seek/replay_break commands and for controlling the execution of replay.
--
v2:
- renamed info_replay qmp into query-replay (suggested by Eric Blake)
v7:
- added empty line (suggested by Markus Armbruster)
--- hmp-commands-info.hx | 14 ++++++++++++++ hmp.h | 1 + qapi/misc.json | 35 +++++++++++++++++++++++++++++++++++ replay/Makefile.objs | 3 ++- replay/replay-debugging.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 replay/replay-debugging.c
hmp-commands-info.hx +14 -0
@@ -918,6 +918,20 @@ STEXI Show SEV information. ETEXI + { + .name = "replay", + .args_type = "", + .params = "", + .help = "show parameters of the record/replay", + .cmd = hmp_info_replay, + }, + +STEXI +@item info replay +@findex info replay +Display the current record/replay mode and the currently executing step. +ETEXI + STEXI @end table ETEXI
hmp.h +1 -0
@@ -148,5 +148,6 @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict);void hmp_info_vm_generation_id (Monitor *mon,const QDict *qdict);void hmp_info_memory_size_summary (Monitor *mon,const QDict *qdict);void hmp_info_sev (Monitor *mon,const QDict *qdict); +void hmp_info_replay (Monitor *mon,const QDict *qdict);#endif
qapi/misc.json +35 -0
@@ -3113,6 +3113,41 @@ 'data': [ 'none', 'record', 'play' ] } ## +# @ReplayInfo: +# +# Status of the record/replay mode. +# +# @mode: current mode. +# +# @filename: name of the record/replay log file. +# +# @step: current step number. +# +# Since: 4.0 +# +## +{ 'struct': 'ReplayInfo', + 'data': { 'mode': 'ReplayMode', '*filename': 'str', 'step': 'int' } } + +## +# @query-replay: +# +# Retrieves the status of the execution record/replay. +# +# Returns: structure with the properties of the record/replay. +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "query-replay" } +# <- { "return": { "mode": "play", "filename": "log.rr", "step": 220414 } } +# +## +{ 'command': 'query-replay', + 'returns': 'ReplayInfo' } + +## # @xen-load-devices-state: # # Load the state of all devices from file. The RAM and the block devices
replay/Makefile.objs +2 -1
@@ -6,4 +6,5 @@ common-obj-y += replay-input.o common-obj-y += replay-char.o common-obj-y += replay-snapshot.o common-obj-y += replay-net.o -common-obj-y += replay-audio.o +common-obj-y += replay-audio.o +common-obj-y += replay-debugging.o
replay/replay-debugging.c new file +42 -0
42 lines not on this page · raw message
PATCH v8 11/20 replay: introduce breakpoint at the specified step
In reply to Pavel DovgalyukThis patch introduces replay_break, replay_delete_break qmp and hmp commands.
These commands allow stopping at the specified instruction. It may be useful for debugging when there are some known events that should be investigated.replay_break command has one argument - number of instructions executed since the start of the replay. replay_delete_break removes previously set breakpoint.
--
v2:
- renamed replay_break qmp command into replay-break (suggested by Eric Blake)
v7:
- introduces replay_delete_break command
--- hmp-commands.hx | 29 ++++++++++++++++ hmp.h | 2 + qapi/misc.json | 31 +++++++++++++++++ replay/replay-debugging.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ replay/replay-internal.h | 4 ++ replay/replay.c | 17 +++++++++ 6 files changed, 167 insertions(+)
hmp-commands.hx +29 -0
@@ -1890,6 +1890,35 @@ Set QOM property @var{property} of object at location @var{path} to value @var{v ETEXI { + .name = "replay_break", + .args_type = "step:i", + .params = "step", + .help = "sets breakpoint on the specified step of the replay", + .cmd = hmp_replay_break, + }, + +STEXI +@item replay_break @var{step} +@findex replay_break +Set breakpoint on the specified step of the replay. +Execution stops when the specified step is reached. +ETEXI + + { + .name = "replay_delete_break", + .args_type = "", + .params = "", + .help = "removes replay breakpoint", + .cmd = hmp_replay_delete_break, + }, + +STEXI +@item replay_delete_break +@findex replay_delete_break +Removes replay breakpoint which was previously set with replay_break. +ETEXI + + { .name = "info", .args_type = "item:s?", .params = "[subcommand]",
hmp.h +2 -0
@@ -149,5 +149,7 @@ void hmp_info_vm_generation_id(Monitor *mon, const QDict *qdict);void hmp_info_memory_size_summary (Monitor *mon,const QDict *qdict);void hmp_info_sev (Monitor *mon,const QDict *qdict);void hmp_info_replay (Monitor *mon,const QDict *qdict); +void hmp_replay_break (Monitor *mon,const QDict *qdict); +void hmp_replay_delete_break (Monitor *mon,const QDict *qdict);#endif
qapi/misc.json +31 -0
@@ -3148,6 +3148,37 @@ 'returns': 'ReplayInfo' } ## +# @replay-break: +# +# Set breakpoint on the specified step of the replay. +# Execution stops when the specified step is reached. +# +# @step: execution step to stop at +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-break", "data": { "step": 220414 } } +# +## +{ 'command': 'replay-break', 'data': { 'step': 'int' } } + +## +# @replay-delete-break: +# +# Removes replay breakpoint. +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-delete-break" } +# +## +{ 'command': 'replay-delete-break' } + +## # @xen-load-devices-state: # # Load the state of all devices from file. The RAM and the block devices
replay/replay-debugging.c +84 -0
93 lines not on this page · raw message
replay/replay-internal.h +4 -0
@@ -91,6 +91,10 @@ extern ReplayState replay_state;/* File for replay writing */ extern FILE *replay_file; +/* Step of the replay breakpoint */ +extern uint64_t replay_break_step; +/* Timer for the replay breakpoint callback */ +extern QEMUTimer *replay_break_timer;void replay_put_byte (uint8_t byte);void replay_put_event (uint8_t event);
replay/replay.c +17 -0
@@ -34,6 +34,10 @@ static char *replay_filename;ReplayState replay_state;static GSList *replay_blockers; +/* Replay breakpoints */ +uint64_t replay_break_step =-1ULL ; +QEMUTimer *replay_break_timer; +bool replay_next_event_is (int event) {bool res = false;
@@ -73,6 +77,13 @@ int replay_get_instructions(void)replay_mutex_lock ();if (replay_next_event_is (EVENT_INSTRUCTION )) { res = replay_state.instructions_count; +if (replay_break_step !=-1LL ) { +uint64_t current =replay_get_current_step (); +assert (replay_break_step >= current); +if (current + res > replay_break_step) { + res = replay_break_step - current; + } + } }replay_mutex_unlock ();return res;
@@ -99,6 +110,12 @@ void replay_account_executed_instructions(void)will be read from the log. */ qemu_notify_event (); } +/* Execution reached the break step */ +if (replay_break_step == replay_state.current_step) { +/* Cannot make callback directly from the vCPU thread */ +timer_mod_ns (replay_break_timer, +qemu_clock_get_ns (QEMU_CLOCK_REALTIME )); + } } } }
PATCH v8 12/20 replay: implement replay-seek command to proceed to the desired step
In reply to Pavel DovgalyukThis patch adds hmp/qmp commands replay_seek/replay-seek that proceed the execution to the specified step.
The commands automatically loads nearest snapshot and replay the execution to find the desired step.
--
v2:
- renamed replay_seek qmp command into replay-seek (suggested by Eric Blake)
v7:
- small fixes related to Markus Armbruster's review
--- hmp-commands.hx | 15 +++++++ hmp.h | 1 qapi/misc.json | 16 ++++++++ replay/replay-debugging.c | 91 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 123 insertions(+)
hmp-commands.hx +15 -0
@@ -1919,6 +1919,21 @@ Removes replay breakpoint which was previously set with replay_break. ETEXI { + .name = "replay_seek", + .args_type = "step:i", + .params = "step", + .help = "rewinds replay to the specified step", + .cmd = hmp_replay_seek, + }, + +STEXI +@item replay_seek @var{step} +@findex replay_seek +Automatically proceeds to the specified step, when replaying +the execution. +ETEXI + + { .name = "info", .args_type = "item:s?", .params = "[subcommand]",
hmp.h +1 -0
@@ -151,5 +151,6 @@ void hmp_info_sev(Monitor *mon, const QDict *qdict);void hmp_info_replay (Monitor *mon,const QDict *qdict);void hmp_replay_break (Monitor *mon,const QDict *qdict);void hmp_replay_delete_break (Monitor *mon,const QDict *qdict); +void hmp_replay_seek (Monitor *mon,const QDict *qdict);#endif
qapi/misc.json +16 -0
@@ -3179,6 +3179,22 @@ { 'command': 'replay-delete-break' } ## +# @replay-seek: +# +# Automatically proceeds to the specified step when replaying +# the execution. +# +# @step: destination execution step +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-seek", "data": { "step": 220414 } } +## +{ 'command': 'replay-seek', 'data': { 'step': 'int' } } + +## # @xen-load-devices-state: # # Load the state of all devices from file. The RAM and the block devices
replay/replay-debugging.c +91 -0
100 lines not on this page · raw message
PATCH v8 13/20 replay: refine replay-time module
In reply to Pavel DovgalyukThis patch removes refactoring artifacts from the replay/replay-time.c
--- replay/replay-time.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-)
replay/replay-time.c +13 -19
@@ -17,16 +17,15 @@int64_t replay_save_clock (ReplayClockKind kind,int64_t clock,int64_t raw_icount) { -if (replay_file) { -g_assert (replay_mutex_locked ()); +g_assert (replay_file); +g_assert (replay_mutex_locked ()); -/* Due to the caller's locking requirements we get the icount from it -* instead of using replay_save_instructions(). -*/ -replay_advance_current_step (raw_icount); -replay_put_event (EVENT_CLOCK + kind); -replay_put_qword (clock); - } +/* Due to the caller's locking requirements we get the icount from it instead +* of using replay_save_instructions(). +*/ +replay_advance_current_step (raw_icount); +replay_put_event (EVENT_CLOCK + kind); +replay_put_qword (clock);return clock; }
@@ -48,20 +47,15 @@ void replay_read_next_clock(ReplayClockKind kind)/*! Reads next clock event from the input. */ int64_t replay_read_clock (ReplayClockKind kind) { +int64_t ret;g_assert (replay_file &&replay_mutex_locked ());replay_account_executed_instructions (); -if (replay_file) { -int64_t ret; -if (replay_next_event_is (EVENT_CLOCK + kind)) { -replay_read_next_clock (kind); - } - ret = replay_state.cached_clock[kind]; - -return ret; +if (replay_next_event_is (EVENT_CLOCK + kind)) { +replay_read_next_clock (kind); } + ret = replay_state.cached_clock[kind]; -error_report ("REPLAY INTERNAL ERROR %d" , __LINE__); -exit (1 ); +return ret; }
PATCH v8 14/20 replay: flush rr queue before loading the vmstate
In reply to Pavel DovgalyukNon-empty record/replay queue prevents saving and loading the VM state, because it includes pending bottom halves and block coroutines. But when the new VM state is loaded, we don't have to preserve the consistency of the current state anymore. Therefore this patch just flushes the queue allowing the coroutines to finish.
--- include/sysemu/replay.h | 2 ++ migration/savevm.c | 4 ++++ replay/replay-internal.h | 2 -- 3 files changed, 6 insertions(+), 2 deletions(-)
include/sysemu/replay.h +2 -0
@@ -140,6 +140,8 @@ void replay_disable_events(void);void replay_enable_events (void );/*! Returns true when saving events is enabled */ bool replay_events_enabled (void ); +/* Flushes events queue */ +void replay_flush_events (void );/*! Adds bottom half event to the queue */ void replay_bh_schedule_event (QEMUBH *bh);/*! Adds input event to the queue */
migration/savevm.c +4 -0
@@ -2701,6 +2701,10 @@ int load_snapshot(const char *name, Error **errp)return -EINVAL ; } +/* Flush the record/replay queue. Now the VM state is going +to change. Therefore we don't need to preserve its consistency */ +replay_flush_events (); +/* Flush all IO requests so they don't interfere with the new state. */ bdrv_drain_all_begin ();
replay/replay-internal.h +0 -2
@@ -146,8 +146,6 @@ void replay_read_next_clock(unsigned int kind);void replay_init_events (void );/*! Clears internal data structures for events handling */ void replay_finish_events (void ); -/*! Flushes events queue */ -void replay_flush_events (void );/*! Returns true if there are any unsaved events in the queue */ bool replay_has_events (void );/*! Saves events from queue into the file */
PATCH v8 15/20 gdbstub: add reverse step support in replay mode
In reply to Pavel DovgalyukGDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of the replay log.
--- accel/tcg/translator.c | 1 + cpus.c | 14 +++++++++++--- exec.c | 5 +++++ gdbstub.c | 42 +++++++++++++++++++++++++++++++++++++++--- include/sysemu/replay.h | 7 +++++++ replay/replay-debugging.c | 33 +++++++++++++++++++++++++++++++++ stubs/replay.c | 5 +++++ 7 files changed, 101 insertions(+), 6 deletions(-)
accel/tcg/translator.c +1 -0
@@ -17,6 +17,7 @@#include "exec/gen-icount.h" #include "exec/log.h" #include "exec/translator.h" +#include "sysemu/replay.h" /* Pairs with tcg_clear_temp_count. To be called by #TranslatorOps.{translate_insn,tb_stop} if
cpus.c +11 -3
@@ -1104,9 +1104,17 @@ static bool cpu_can_run(CPUState *cpu)static void cpu_handle_guest_debug (CPUState *cpu) { -gdb_set_stop_cpu (cpu); -qemu_system_debug_request (); - cpu->stopped = true; +if (!replay_running_debug ()) { +gdb_set_stop_cpu (cpu); +qemu_system_debug_request (); + cpu->stopped = true; + }else { +if (!cpu->singlestep_enabled) { +cpu_single_step (cpu,SSTEP_ENABLE ); + }else { +cpu_single_step (cpu,0 ); + } + } }#ifdef CONFIG_LINUX
exec.c +5 -0
@@ -2739,6 +2739,11 @@ static void check_watchpoint(int offset, int len, MemTxAttrs attrs, int flags) QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {if (cpu_watchpoint_address_matches (wp, vaddr, len) && (wp->flags & flags)) { +if (replay_running_debug ()) { +/* Don't process the watchpoints when we are +in a reverse debugging operation. */ +return ; + }if (flags ==BP_MEM_READ ) { wp->flags |=BP_WATCHPOINT_HIT_READ ; }else {
gdbstub.c +39 -3
80 lines not on this page · raw message
include/sysemu/replay.h +7 -0
@@ -73,6 +73,13 @@ void replay_finish(void);void replay_add_blocker (Error *reason);/* Returns name of the replay log file */ const char *replay_get_filename (void ); +/* Start making one step in backward direction. +Used by gdbstub for backwards debugging. +Returns true on success. */ +bool replay_reverse_step (void ); +/* Returns true if replay module is processing +reverse_continue or reverse_step request */ +bool replay_running_debug (void );/* Processing the instructions */
replay/replay-debugging.c +33 -0
@@ -21,6 +21,13 @@#include "block/snapshot.h" #include "migration/snapshot.h" +static bool replay_is_debugging; + +bool replay_running_debug (void ) +{ +return replay_is_debugging; +} +void hmp_info_replay (Monitor *mon,const QDict *qdict) {if (replay_mode ==REPLAY_MODE_NONE ) {
@@ -215,3 +222,29 @@ void hmp_replay_seek(Monitor *mon, const QDict *qdict)return ; } } + +static void replay_stop_vm_debug (void *opaque) +{ + replay_is_debugging = false; +vm_stop (RUN_STATE_DEBUG ); +replay_break (-1LL ,NULL ,NULL ); +} + +bool replay_reverse_step (void ) +{ +Error *err =NULL ; + +assert (replay_mode ==REPLAY_MODE_PLAY ); + +if (replay_get_current_step () !=0 ) { +replay_seek (replay_get_current_step () -1 , replay_stop_vm_debug, &err); +if (err) { +error_free (err); +return false; + } + replay_is_debugging = true; +return true; + } + +return false; +}
stubs/replay.c +5 -0
@@ -80,3 +80,8 @@ void replay_mutex_lock(void)void replay_mutex_unlock (void ) { } + +bool replay_reverse_step (void ) +{ +return false; +}
PATCH v8 16/20 gdbstub: add reverse continue support in replay mode
In reply to Pavel DovgalyukThis patch adds support of the reverse continue operation for gdbstub. Reverse continue finds the last breakpoint that would happen in normal execution from the beginning to the current moment. Implementation of the reverse continue replays the execution twice:
to find the breakpoints that were hit and to seek to the last breakpoint. Reverse continue loads the previous snapshot and tries to find the breakpoint since that moment. If there are no such breakpoints, it proceeds to the earlier snapshot, and so on. When no breakpoints or watchpoints were hit at all, execution stops at the beginning of the replay log.
--- cpus.c | 3 ++ exec.c | 1 + gdbstub.c | 10 ++++++- include/sysemu/replay.h | 6 ++++ replay/replay-debugging.c | 69 +++++++++++++++++++++++++++++++++++++++++++++ stubs/replay.c | 5 +++ 6 files changed, 93 insertions(+), 1 deletion(-)
cpus.c +3 -0
@@ -1110,6 +1110,9 @@ static void cpu_handle_guest_debug(CPUState *cpu) cpu->stopped = true; }else {if (!cpu->singlestep_enabled) { +/* Report about the breakpoint and +make a single step to skip it */ +replay_breakpoint ();cpu_single_step (cpu,SSTEP_ENABLE ); }else {cpu_single_step (cpu,0 );
exec.c +1 -0
@@ -2742,6 +2742,7 @@ static void check_watchpoint(int offset, int len, MemTxAttrs attrs, int flags)if (replay_running_debug ()) {/* Don't process the watchpoints when we are in a reverse debugging operation. */ +replay_breakpoint ();return ; }if (flags ==BP_MEM_READ ) {
gdbstub.c +9 -1
@@ -1110,6 +1110,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s,"E14" );break ; } +case 'c' : +if (replay_reverse_continue ()) { +gdb_continue (s); +return RS_IDLE ; + }else { +put_packet (s,"E14" ); +break ; + }default : goto unknown_command; }
@@ -1380,7 +1388,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)pstrcat (buf,sizeof (buf),";qXfer:features:read+" ); }if (replay_mode ==REPLAY_MODE_PLAY ) { -pstrcat (buf,sizeof (buf),";ReverseStep+" ); +pstrcat (buf,sizeof (buf),";ReverseStep+;ReverseContinue+" ); }put_packet (s, buf);break ;
include/sysemu/replay.h +6 -0
@@ -77,9 +77,15 @@ const char *replay_get_filename(void);Used by gdbstub for backwards debugging. Returns true on success. */ bool replay_reverse_step (void ); +/* Start searching the last breakpoint/watchpoint. +Used by gdbstub for backwards debugging. +Returns true if the process successfully started. */ +bool replay_reverse_continue (void );/* Returns true if replay module is processing reverse_continue or reverse_step request */ bool replay_running_debug (void ); +/* Called in reverse debugging mode to collect breakpoint information */ +void replay_breakpoint (void );/* Processing the instructions */
replay/replay-debugging.c +69 -0
78 lines not on this page · raw message
stubs/replay.c +5 -0
@@ -85,3 +85,8 @@ bool replay_reverse_step(void) {return false; } + +bool replay_reverse_continue (void ) +{ +return false; +}
PATCH v8 17/20 replay: describe reverse debugging in docs/replay.txt
In reply to Pavel DovgalyukThis patch updates the documentation and describes usage of the reverse debugging in QEMU+GDB.
--- docs/replay.txt | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
docs/replay.txt +33 -0
@@ -293,6 +293,39 @@ for recording and replaying must contain identical number of ports in record and replay modes, but their backends may differ. E.g., '-serial stdio' in record mode, and '-serial null' in replay mode. +Reverse debugging +----------------- + +Reverse debugging allows "executing" the program in reverse direction. +GDB remote protocol supports "reverse step" and "reverse continue" +commands. The first one steps single instruction backwards in time, +and the second one finds the last breakpoint in the past. + +Recorded executions may be used to enable reverse debugging. QEMU can't +execute the code in backwards direction, but can load a snapshot and +replay forward to find the desired position or breakpoint. + +The following GDB commands are supported: + - reverse-stepi (or rsi) - step one instruction backwards + - reverse-continue (or rc) - find last breakpoint in the past + +Reverse step loads the nearest snapshot and replays the execution until +the required instruction is met. + +Reverse continue may include several passes of examining the execution +between the snapshots. Each of the passes include the following steps: + 1. loading the snapshot + 2. replaying to examine the breakpoints + 3. if breakpoint or watchpoint was met + - loading the snaphot again + - replaying to the required breakpoint + 4. else + - proceeding to the p.1 with the earlier snapshot + +Therefore usage of the reverse debugging requires at least one snapshot +created in advance. See the "Snapshotting" section to learn about running +record/replay and creating the snapshot in these modes. + Replay log format -----------------
PATCH v8 18/20 replay: add BH oneshot event for block layer
In reply to Pavel DovgalyukReplay is capable of recording normal BH events, but sometimes there are single use callbacks scheduled with aio_bh_schedule_oneshot function. This patch enables recording and replaying such callbacks. Block layer uses these events for calling the completion function. Replaying these calls makes the execution deterministic.
--
v6:
- moved stub function to the separate file for fixing linux-user build
--- block/block-backend.c | 5 +++-- include/sysemu/replay.h | 3 +++ replay/replay-events.c | 16 ++++++++++++++++ replay/replay-internal.h | 1 + replay/replay.c | 2 +- stubs/Makefile.objs | 1 + stubs/replay-user.c | 9 +++++++++ 7 files changed, 34 insertions(+), 3 deletions(-) create mode 100644 stubs/replay-user.c
block/block-backend.c +3 -2
@@ -17,6 +17,7 @@#include "block/throttle-groups.h" #include "sysemu/blockdev.h" #include "sysemu/sysemu.h" +#include "sysemu/replay.h" #include "qapi/error.h" #include "qapi/qapi-events-block.h" #include "qemu/id.h"
@@ -1380,8 +1381,8 @@ static BlockAIOCB *blk_aio_prwv(BlockBackend *blk, int64_t offset, int bytes, acb->has_returned = true;if (acb->rwco.ret !=NOT_DONE ) { -aio_bh_schedule_oneshot (blk_get_aio_context (blk), - blk_aio_complete_bh, acb); +replay_bh_schedule_oneshot_event (blk_get_aio_context (blk), + blk_aio_complete_bh, acb); }return &acb->common;
include/sysemu/replay.h +3 -0
@@ -157,6 +157,9 @@ bool replay_events_enabled(void);void replay_flush_events (void );/*! Adds bottom half event to the queue */ void replay_bh_schedule_event (QEMUBH *bh); +/* Adds oneshot bottom half event to the queue */ +void replay_bh_schedule_oneshot_event (AioContext *ctx, +QEMUBHFunc *cb,void *opaque);/*! Adds input event to the queue */ void replay_input_event (QemuConsole *src,InputEvent *evt);/*! Adds input sync event to the queue */
replay/replay-events.c +16 -0
@@ -37,6 +37,9 @@ static void replay_run_event(Event *event)case REPLAY_ASYNC_EVENT_BH :aio_bh_call (event->opaque);break ; +case REPLAY_ASYNC_EVENT_BH_ONESHOT : + ((QEMUBHFunc *)event->opaque)(event->opaque2); +break ;case REPLAY_ASYNC_EVENT_INPUT :qemu_input_event_send_impl (NULL , (InputEvent *)event->opaque);qapi_free_InputEvent ((InputEvent *)event->opaque);
@@ -132,6 +135,17 @@ void replay_bh_schedule_event(QEMUBH *bh) } } +void replay_bh_schedule_oneshot_event (AioContext *ctx, +QEMUBHFunc *cb,void *opaque) +{ +if (events_enabled) { +uint64_t id =replay_get_current_step (); +replay_add_event (REPLAY_ASYNC_EVENT_BH_ONESHOT , cb, opaque, id); + }else { +aio_bh_schedule_oneshot (ctx, cb, opaque); + } +} +void replay_add_input_event (struct InputEvent *event) {replay_add_event (REPLAY_ASYNC_EVENT_INPUT , event,NULL ,0 );
@@ -162,6 +176,7 @@ static void replay_save_event(Event *event, int checkpoint)/* save event-specific data */ switch (event->event_kind) {case REPLAY_ASYNC_EVENT_BH : +case REPLAY_ASYNC_EVENT_BH_ONESHOT :replay_put_qword (event->id);break ;case REPLAY_ASYNC_EVENT_INPUT :
@@ -217,6 +232,7 @@ static Event *replay_read_event(int checkpoint)/* Events that has not to be in the queue */ switch (replay_state.read_event_kind) {case REPLAY_ASYNC_EVENT_BH : +case REPLAY_ASYNC_EVENT_BH_ONESHOT :if (replay_state.read_event_id ==-1 ) { replay_state.read_event_id =replay_get_qword (); }
replay/replay-internal.h +1 -0
@@ -51,6 +51,7 @@ enum ReplayEvents {enum ReplayAsyncEventKind {REPLAY_ASYNC_EVENT_BH , +REPLAY_ASYNC_EVENT_BH_ONESHOT ,REPLAY_ASYNC_EVENT_INPUT ,REPLAY_ASYNC_EVENT_INPUT_SYNC ,REPLAY_ASYNC_EVENT_CHAR_READ ,
replay/replay.c +1 -1
@@ -22,7 +22,7 @@/* Current version of the replay mechanism. Increase it when file format changes. */ -#define REPLAY_VERSION 0xe02007 +#define REPLAY_VERSION 0xe02008/* Size of replay log header */ #define HEADER_SIZE (sizeof(uint32_t) + sizeof(uint64_t))
stubs/Makefile.objs +1 -0
@@ -24,6 +24,7 @@ stub-obj-y += monitor.o stub-obj-y += notify-event.o stub-obj-y += qtest.o stub-obj-y += replay.o +stub-obj-y += replay-user.o stub-obj-y += runstate-check.o stub-obj-y += set-fd-handler.o stub-obj-y += slirp.o
stubs/replay-user.c new file +9 -0
@@ -0,0 +1,9 @@ +#include "qemu/osdep.h" +#include "sysemu/replay.h" +#include "sysemu/sysemu.h" + +void replay_bh_schedule_oneshot_event (AioContext *ctx, +QEMUBHFunc *cb,void *opaque) +{ +aio_bh_schedule_oneshot (ctx, cb, opaque); +}
PATCH v8 19/20 replay: init rtc after enabling the replay
In reply to Pavel DovgalyukThis patch postpones the call of 'configure_rtc' function. This call uses host clock to configure the rtc, but host clock access should be recorded when using icount record/replay mode. Therefore now rtc is configured after switching record/replay mode on.
--- vl.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
vl.c +7 -3
@@ -2979,6 +2979,7 @@ int main(int argc, char **argv, char **envp)DisplayState *ds;QemuOpts *opts, *machine_opts;QemuOpts *icount_opts =NULL , *accel_opts =NULL ; +QemuOpts *rtc_opts =NULL ;QemuOptsList *olist;int optind;const char *optarg;
@@ -3788,9 +3789,9 @@ int main(int argc, char **argv, char **envp)warn_report ("This option is ignored and will be removed soon" );break ;case QEMU_OPTION_rtc: - opts =qemu_opts_parse_noisily (qemu_find_opts ("rtc" ), optarg, - false); -if (!opts) { + rtc_opts =qemu_opts_parse_noisily (qemu_find_opts ("rtc" ), + optarg, false); +if (!rtc_opts) {exit (1 ); }break ;
@@ -4003,6 +4004,9 @@ int main(int argc, char **argv, char **envp)loc_set_none ();replay_configure (icount_opts); +if (rtc_opts) { +configure_rtc (rtc_opts); + }if (incoming && !preconfig_exit_requested) { error_report("'preconfig' and 'incoming' options are "
PATCH v8 20/20 replay: document development rules
In reply to Pavel DovgalyukThis patch introduces docs/devel/replay.txt which describes the rules that should be followed to make virtual devices usable in record/replay mode.
--- docs/devel/replay.txt | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 docs/devel/replay.txt
docs/devel/replay.txt new file +45 -0
@@ -0,0 +1,45 @@ +Record/replay mechanism, that could be enabled through icount mode, expects +the virtual devices to satisfy the following requirements. + +The main idea behind this document is that everything that affects +the guest state during execution in icount mode should be deterministic. + +Timers +====== + +All virtual devices should use virtual clock for timers that change the guest +state. Virtual clock is deterministic, therefore such timers are deterministic +too. + +Virtual devices can also use realtime clock for the events that do not change +the guest state directly. When the clock ticking should depend on VM execution +speed, use virtual ext clock. It is not deterministic, but its speed depends +on the guest execution. This clock is used by the virtual devices (e.g., +slirp routing device) that lie outside the replayed guest. + +Bottom halves +============= + +Bottom half callbacks, that affect the guest state, should be invoked through +replay_bh_schedule_event or replay_bh_schedule_oneshot_event functions. +Their invocations are saved in record mode and synchronized with the existing +log in replay mode. + +Saving/restoring the VM state +============================= + +All fields in the device state structure (including virtual timers) +should be restored by loadvm to the same values they had before savevm. + +Avoid accessing other devices' state, because the order of saving/restoring +is not defined. It means that you should not call functions like +'update_irq' in post_load callback. Save everything explicitly to avoid +the dependencies that may make restoring the VM state non-deterministic. + +Stopping the VM +=============== + +Stopping the guest should not interfere with its state (with the exception +of the network connections, that could be broken by the remote timeouts). +VM can be stopped at any moment of replay by the user. Restarting the VM +after that stop should not break the replay by the unneeded guest state change.
Re: [Qemu-devel] [PATCH v8 20/20] replay: document development rules
Quoted 1 line
+Virtual devices can also use realtime clock for the events that do not
change
Quoted 1 line
+the guest state directly. When the clock ticking should depend on VM
execution
Quoted 1 line
+speed, use virtual ext clock. It is not deterministic, but its speed
depends
docs/devel/replay.txt line 18
Quoted 2 lines
docs/devel/replay.txt new file +2
-0+on the guest execution. This clock is used by the virtual devices (e.g., +slirp routing device) that lie outside the replayed guest.
Virtual ext clock replaced with virtual clock timers having EXTERNAL attribute.
Re: [Qemu-devel] [PATCH v8 10/20] replay: introduce info hmp/qmp command
In reply to Pavel DovgalyukQuoted 74 lines · Pavel Dovgalyuk
This patch introduces 'info replay' monitor command and corresponding qmp request.
These commands request the current record/replay mode, replay log file name, and the execution step (number or recorded/replayed instructions). User may use step number for replay_seek/replay_break commands and for controlling the execution of replay.Signed-off-by Pavel Dovgalyuk <[email protected]>--
v2:
- renamedinfo_replayqmp into query-replay (suggested by Eric Blake)
v7:
- added empty line (suggested by Markus Armbruster)--- hmp-commands-info.hx | 14 ++++++++++++++ hmp.h | 1 + qapi/misc.json | 35 +++++++++++++++++++++++++++++++++++ replay/Makefile.objs | 3 ++- replay/replay-debugging.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 replay/replay-debugging.chmp-commands-info.hx +14
-0@@ -918,6 +918,20 @@ STEXI Show SEV information. ETEXI + { + .name = "replay", + .args_type = "", + .params = "", + .help = "show parameters of the record/replay", + .cmd = hmp_info_replay, + }, + +STEXI +@item info replay +@findex info replay +Display the current record/replay mode and the currently executing step. +ETEXI + STEXI @end table ETEXIhmp.h +1
-0@@ -148,5 +148,6 @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict);void hmp_info_vm_generation_id (Monitor *mon,const QDict *qdict);void hmp_info_memory_size_summary (Monitor *mon,const QDict *qdict);void hmp_info_sev (Monitor *mon,const QDict *qdict); +void hmp_info_replay (Monitor *mon,const QDict *qdict);#endif qapi/misc.json +5
-0@@ -3113,6 +3113,41 @@ 'data': [ 'none', 'record', 'play' ] } ## +# @ReplayInfo: +# +# Status of the record/replay mode. +# +# @mode: current mode.
qapi/misc.json line 3130
Quoted 10 lines
qapi/misc.json +10
-0+# +# @filename: name of the record/replay log file. +# +# @step: current step number. +# +# Since: 4.0 +# +## +{ 'struct': 'ReplayInfo', + 'data': { 'mode': 'ReplayMode', '*filename': 'str', 'step': 'int' } }
@filename is optional. For each ReplayMode: is @filename always absent, always present, or can it be either?
qapi/misc.json line 3137
Quoted 7 lines
qapi/misc.json +7
-0+ +## +# @query-replay: +# +# Retrieves the status of the execution record/replay. +# +# Returns: structure with the properties of the record/replay.
You've used "parameters of the record/replay" (in HMP help info), "status of the record/replay mode" (QMP ReplayInfo doc), "the status of the execution record/replay" (QMP query-replay doc), and "structure with the properties of the record/replay". Please pick one. I think I'd pick "record/replay information".
In my (superficial) review of v6, I asked what a client would do with @step. You gave two use cases:
1. Control current step to be sure that replay is not stalled due to the bug.
2. Requesting the step for some moment of execution to use it as a parameter of replay_seek/replay_break operations. I.e., for returning to the same point later.
The first one is a bit vague. The second one sounds plausible enough to me at least for stopped VMs (for running VMs, it feels too imprecise to be useful, but what do I know). replay-break is in PATCH 11, replay-seek in PATCH 12. Would it make sense add a suitable reference to ReplayInfo's documentation then?
Quoted 6 lines
qapi/misc.json +6
-0+# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "query-replay" }
qapi/misc.json line 3153
Quoted 10 lines
qapi/misc.json +7
-0+# <- { "return": { "mode": "play", "filename": "log.rr", "step": 220414 } } +# +## +{ 'command': 'query-replay', + 'returns': 'ReplayInfo' } + +## # @xen-load-devices-state: # # Load the state of all devices from file. The RAM and the block devices
At the end of this series, record/replay takes almost 100 non-blank lines in misc.json. Let's create a separate QAPI schema module qapi/replay.json, so we can have MAINTAINERS cover this stuff properly.
Quoted 60 lines
replay/Makefile.objs +2
-1@@ -6,4 +6,5 @@ common-obj-y += replay-input.o common-obj-y += replay-char.o common-obj-y += replay-snapshot.o common-obj-y += replay-net.o -common-obj-y += replay-audio.o +common-obj-y += replay-audio.o +common-obj-y += replay-debugging.oreplay/replay-debugging.c new file +42
-0@@ -0,0 +1,42 @@ +/* +* replay-debugging.c +* +* Copyright (c) 2010-2018 Institute for System Programming +* of the Russian Academy of Sciences. +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +* +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "sysemu/replay.h" +#include "replay-internal.h" +#include "hmp.h" +#include "monitor/monitor.h" +#include "qapi/qapi-commands-misc.h" + +void hmp_info_replay (Monitor *mon,const QDict *qdict) +{ +if (replay_mode ==REPLAY_MODE_NONE ) { +monitor_printf (mon,"No record/replay\n" ); + }else { +monitor_printf (mon,"%s execution '%s': current step = %" PRId64"\n" , + replay_mode ==REPLAY_MODE_RECORD ?"Recording" :"Replaying" , +replay_get_filename (),replay_get_current_step ()); + } +} + +ReplayInfo *qmp_query_replay (Error **errp) +{ +ReplayInfo *retval =g_new0 (ReplayInfo,1 ); + + retval->mode = replay_mode; +if (replay_get_filename ()) { + retval->filename =g_strdup (replay_get_filename ()); + retval->has_filename = true; + } + retval->step =replay_get_current_step (); +return retval; +}
Re: [Qemu-devel] [PATCH v8 08/20] migration: introduce icount field for snapshots
In reply to Pavel DovgalyukQuoted 8 lines · Pavel Dovgalyuk
Saving icount as a parameters of the snapshot allows navigation between them in the execution replay scenario.
This information can be used for finding a specific snapshot for rewinding the recorded execution to the specific moment of the time. E.g., 'reverse step' action needs to load the nearest snapshot which is prior to the current moment of time .Signed-off-by Pavel Dovgalyuk <[email protected]>
[...]
Quoted 30 lines
migration/savevm.c +5
-0@@ -2509,6 +2509,11 @@ int save_snapshot(const char *name, Error **errp) sn->date_sec = tv.tv_sec; sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +if (replay_mode !=REPLAY_MODE_NONE ) { + sn->icount =replay_get_current_step (); + }else { + sn->icount =-1ULL ; + }if (name) { ret =bdrv_snapshot_find (bs, old_sn, name);qapi/block-core.json +4
-0@@ -26,13 +26,18 @@ # # @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec # +# @icount: Current instruction count. Appears when execution record/replay +# is enabled. Used for "time-traveling" to match the moment +# in the recorded execution with the snapshots (since 4.0) +# # Since: 1.3 #
qapi/block-core.json line 43
Quoted 10 lines
qapi/block-core.json +2
-1## { 'struct': 'SnapshotInfo', 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', 'date-sec': 'int', 'date-nsec': 'int', - 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } } + 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int', + '*icount': 'int' } } ## # @ImageInfoSpecificQCow2EncryptionBase:
As far as I can tell, @icount is the same as ReplayInfo's @step. But I had to look at the code to tell. Please name the two consistently. Also consider having the documentation refer to ReplayInfo.
Quoted 14 lines
qapi/block.json +2
-1@@ -176,7 +176,8 @@ # "date-sec": 1000012, # "date-nsec": 10, # "vm-clock-sec": 100, -# "vm-clock-nsec": 20 +# "vm-clock-nsec": 20, +# "icount": 220414 # } # } #
Re: [Qemu-devel] [PATCH v8 11/20] replay: introduce breakpoint at the specified step
In reply to Pavel DovgalyukQuoted 10 lines · Pavel Dovgalyuk
This patch introduces
replay_break,replay_delete_breakqmp and hmp commands.
These commands allow stopping at the specified instruction. It may be useful for debugging when there are some known events that should be investigated.replay_breakcommand has one argument - number of instructions executed since the start of the replay.replay_delete_breakremoves previously set breakpoint.Signed-off-by Pavel Dovgalyuk <[email protected]>
[...]
Quoted 32 lines
qapi/misc.json +24
-0@@ -3148,6 +3148,37 @@ 'returns': 'ReplayInfo' } ## +# @replay-break: +# +# Set breakpoint on the specified step of the replay. +# Execution stops when the specified step is reached. +# +# @step: execution step to stop at +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-break", "data": { "step": 220414 } } +# +## +{ 'command': 'replay-break', 'data': { 'step': 'int' } } + +## +# @replay-delete-break: +# +# Removes replay breakpoint. +# +# Since: 4.0 +# +# Example:
qapi/misc.json line 3184
Quoted 10 lines
qapi/misc.json +7
-0+# +# -> { "execute": "replay-delete-break" } +# +## +{ 'command': 'replay-delete-break' } + +## # @xen-load-devices-state: # # Load the state of all devices from file. The RAM and the block devices
This interface can support at most one breakpoint. That's okay; if you want to schedule multiple stops, you queue them further up the stack, and use this command to set the next one before you resume execution.
If we ever decide to queue in QEMU, we'd have to add optional breakpoint names to these functions, defaulting to some implied name. Not exactly elegant, but workable.
What does replay-break do when the breakpoint has been set already?
What does it do when @step is in the past?
What does replay-delete-break do when no breakpoint has been set?
The answers to these questions need to be worked into the comamnd documentation.
As mentioned in review of PATCH 10, having the documentation point to query-replay might make sense.
[...]
Re: [Qemu-devel] [PATCH v8 12/20] replay: implement replay-seek command to proceed to the desired step
In reply to Pavel DovgalyukQuoted 6 lines · Pavel Dovgalyuk
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed the execution to the specified step.
The commands automatically loads nearest snapshot and replay the execution to find the desired step.Signed-off-by Pavel Dovgalyuk <[email protected]>
[...]
Quoted 14 lines
qapi/misc.json +6
-0@@ -3179,6 +3179,22 @@ { 'command': 'replay-delete-break' } ## +# @replay-seek: +# +# Automatically proceeds to the specified step when replaying +# the execution. +# +# @step: destination execution step
qapi/misc.json line 3197
Quoted 10 lines
qapi/misc.json +10
-0+# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-seek", "data": { "step": 220414 } } +## +{ 'command': 'replay-seek', 'data': { 'step': 'int' } } + +##
Your commit message explains the relation to snapshots. The QMP documentation doesn't.
What happens when no snapshot preceding @step exists?
[...]
Re: [Qemu-devel] [PATCH v8 10/20] replay: introduce info hmp/qmp command
In reply to Markus ArmbrusterQuoted 113 lines
From: Markus Armbruster [mailto:[email protected]]
Quoted 74 lines · Pavel Dovgalyuk
This patch introduces 'info replay' monitor command and corresponding qmp request.
These commands request the current record/replay mode, replay log file name, and the execution step (number or recorded/replayed instructions). User may use step number for replay_seek/replay_break commands and for controlling the execution of replay.Signed-off-by Pavel Dovgalyuk <[email protected]>--
v2:
- renamedinfo_replayqmp into query-replay (suggested by Eric Blake)
v7:
- added empty line (suggested by Markus Armbruster)--- hmp-commands-info.hx | 14 ++++++++++++++ hmp.h | 1 + qapi/misc.json | 35 +++++++++++++++++++++++++++++++++++ replay/Makefile.objs | 3 ++- replay/replay-debugging.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 replay/replay-debugging.chmp-commands-info.hx +14
-0@@ -918,6 +918,20 @@ STEXI Show SEV information. ETEXI + { + .name = "replay", + .args_type = "", + .params = "", + .help = "show parameters of the record/replay", + .cmd = hmp_info_replay, + }, + +STEXI +@item info replay +@findex info replay +Display the current record/replay mode and the currently executing step. +ETEXI + STEXI @end table ETEXIhmp.h +1
-0@@ -148,5 +148,6 @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict);void hmp_info_vm_generation_id (Monitor *mon,const QDict *qdict);void hmp_info_memory_size_summary (Monitor *mon,const QDict *qdict);void hmp_info_sev (Monitor *mon,const QDict *qdict); +void hmp_info_replay (Monitor *mon,const QDict *qdict);#endif qapi/misc.json +5
-0@@ -3113,6 +3113,41 @@ 'data': [ 'none', 'record', 'play' ] } ## +# @ReplayInfo: +# +# Status of the record/replay mode. +# +# @mode: current mode.qapi/misc.json line 3130
Quoted 10 lines
qapi/misc.json +10
-0+# +# @filename: name of the record/replay log file. +# +# @step: current step number. +# +# Since: 4.0 +# +## +{ 'struct': 'ReplayInfo', + 'data': { 'mode': 'ReplayMode', '*filename': 'str', 'step': 'int' } }@filename is optional. For each ReplayMode: is @filename always absent, always present, or can it be either?
qapi/misc.json line 3137
Quoted 7 lines
qapi/misc.json +7
-0+ +## +# @query-replay: +# +# Retrieves the status of the execution record/replay. +# +# Returns: structure with the properties of the record/replay.You've used "parameters of the record/replay" (in HMP help info), "status of the record/replay mode" (QMP ReplayInfo doc), "the status of the execution record/replay" (QMP query-replay doc), and "structure with the properties of the record/replay". Please pick one. I think I'd pick "record/replay information".
In my (superficial) review of v6, I asked what a client would do with @step. You gave two use cases:
1. Control current step to be sure that replay is not stalled due to the bug.
2. Requesting the step for some moment of execution to use it as a parameter of replay_seek/replay_break operations. I.e., for returning to the same point later.
Quoted 5 lines
The first one is a bit vague. The second one sounds plausible enough to me at least for stopped VMs (for running VMs, it feels too imprecise to be useful, but what do I know). replay-break is in PATCH 11, replay-seek in PATCH 12. Would it make sense add a suitable reference to ReplayInfo's documentation then?
Thanks for reviewing, I'll update this in the next version.
Pavel Dovgalyuk
Re: [Qemu-devel] [PATCH v8 08/20] migration: introduce icount field for snapshots
In reply to Markus ArmbrusterQuoted 50 lines
From: Markus Armbruster [mailto:[email protected]]
Quoted 8 lines · Pavel Dovgalyuk
Saving icount as a parameters of the snapshot allows navigation between them in the execution replay scenario.
This information can be used for finding a specific snapshot for rewinding the recorded execution to the specific moment of the time. E.g., 'reverse step' action needs to load the nearest snapshot which is prior to the current moment of time .Signed-off-by Pavel Dovgalyuk <[email protected]>[...]
Quoted 38 lines
migration/savevm.c +5
-0@@ -2509,6 +2509,11 @@ int save_snapshot(const char *name, Error **errp) sn->date_sec = tv.tv_sec; sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +if (replay_mode !=REPLAY_MODE_NONE ) { + sn->icount =replay_get_current_step (); + }else { + sn->icount =-1ULL ; + }if (name) { ret =bdrv_snapshot_find (bs, old_sn, name);qapi/block-core.json +6
-1@@ -26,13 +26,18 @@ # # @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec # +# @icount: Current instruction count. Appears when execution record/replay +# is enabled. Used for "time-traveling" to match the moment +# in the recorded execution with the snapshots (since 4.0) +# # Since: 1.3 # ## { 'struct': 'SnapshotInfo', 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', 'date-sec': 'int', 'date-nsec': 'int', - 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } } + 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int', + '*icount': 'int' } }
Quoted 6 lines
qapi/block-core.json line 43
Quoted 2 lines
qapi/block-core.json +0
-0## # @ImageInfoSpecificQCow2EncryptionBase:As far as I can tell, @icount is the same as ReplayInfo's @step. But I had to look at the code to tell. Please name the two consistently. Also consider having the documentation refer to ReplayInfo.
Thanks for noticing, renamed everything to 'icount' to match with command line option.
Pavel Dovgalyuk
Patchew URL: https://patchew.org/QEMU/20181218112056.11727.96529.stgit@pasha-VirtualBox/
Patchew URL: https://patchew.org/QEMU/20181218112056.11727.96529.stgit@pasha-VirtualBox/
Hi,
This series seems to have some coding style problems. See output below for more information:
Message-id: 20181218112056.11727.96529.stgit@pasha-VirtualBox
Type: series
Subject: [Qemu-devel] [PATCH v8 00/20] Fixing record/replay and adding reverse debugging
=== TEST SCRIPT BEGIN ===
#!/bin/bash
BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
commits="$(git log --format=%H --reverse $BASE..)" for c in $commits; do
echo "Checking PATCH $n/$total: $(git log -n 1 --format=%s $c)..."
if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
failed=1
echo
fi
n=$((n+1))done
exit $failed
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
015b13e replay: document development rules
3c71cd8 replay: init rtc after enabling the replay
f14a566 replay: add BH oneshot event for block layer
b8ac538 replay: describe reverse debugging in docs/replay.txt d4b2daf gdbstub: add reverse continue support in replay mode 66f30a1 gdbstub: add reverse step support in replay mode
999fda4 replay: flush rr queue before loading the vmstate 980a4b5 replay: refine replay-time module
bcd6666 replay: implement replay-seek command to proceed to the desired step 682d014 replay: introduce breakpoint at the specified step 8b30c17 replay: introduce info hmp/qmp command
8d0888e replay: provide and accessor for rr filename
6b36a8a migration: introduce icount field for snapshots
91f8963 qcow2: introduce icount field for snapshots
b293bcc replay: finish record/replay before closing the disks 956d817 replay: don't drain/flush bdrv queue while RR is working ca51ab0 replay: update docs for record/replay with block devices 77124bb replay: disable default snapshot for record/replay 11d0373 block: implement bdrv_snapshot_goto for blkreplay 38d86bc replay: add missing fix for internal function
=== OUTPUT BEGIN ===
Checking PATCH 1/20: replay: add missing fix for internal function... Checking PATCH 2/20: block: implement bdrv_snapshot_goto for blkreplay... Checking PATCH 3/20: replay: disable default snapshot for record/replay... Checking PATCH 4/20: replay: update docs for record/replay with block devices... Checking PATCH 5/20: replay: don't drain/flush bdrv queue while RR is working...
WARNING: Block comments use a leading /* on a separate line
#33: FILE: block/io.c:542:
+ /* bdrv queue is managed by record/replay,
WARNING: Block comments use * on subsequent lines
#34: FILE: block/io.c:543:
+ /* bdrv queue is managed by record/replay,
+ waiting for finishing the I/O requests may
WARNING: Block comments use a trailing */ on a separate line #35: FILE: block/io.c:544:
+ be infinite */
WARNING: Block comments use a leading /* on a separate line #47: FILE: block/io.c:577:
+ /* bdrv queue is managed by record/replay,
WARNING: Block comments use * on subsequent lines
#48: FILE: block/io.c:578:
+ /* bdrv queue is managed by record/replay,
+ waiting for finishing the I/O requests may
WARNING: Block comments use a trailing */ on a separate line #49: FILE: block/io.c:579:
+ be endless */
WARNING: Block comments use a leading /* on a separate line #61: FILE: block/io.c:2015:
+ /* bdrv queue is managed by record/replay,
WARNING: Block comments use * on subsequent lines
#62: FILE: block/io.c:2016:
+ /* bdrv queue is managed by record/replay,
+ creating new flush request for stopping
WARNING: Block comments use a trailing */ on a separate line #63: FILE: block/io.c:2017:
+ the VM may break the determinism */
total: 0 errors, 9 warnings, 60 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 6/20: replay: finish record/replay before closing the disks... Checking PATCH 7/20: qcow2: introduce icount field for snapshots... Checking PATCH 8/20: migration: introduce icount field for snapshots... Checking PATCH 9/20: replay: provide and accessor for rr filename... Checking PATCH 10/20: replay: introduce info hmp/qmp command...
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #119:
new file mode 100644
total: 0 errors, 1 warnings, 116 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
Checking PATCH 11/20: replay: introduce breakpoint at the specified step...
WARNING: line over 80 characters
#150: FILE: replay/replay-debugging.c:58:
+ replay_break_timer = timer_new_ns(QEMU_CLOCK_REALTIME, callback, opaque);
total: 0 errors, 1 warnings, 217 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 12/20: replay: implement replay-seek command to proceed to the desired step... Checking PATCH 13/20: replay: refine replay-time module...
WARNING: line over 80 characters
#31: FILE: replay/replay-time.c:23:
+ /* Due to the caller's locking requirements we get the icount from it instead
WARNING: Block comments use a leading /* on a separate line #31: FILE: replay/replay-time.c:23:
+ /* Due to the caller's locking requirements we get the icount from it instead
total: 0 errors, 2 warnings, 49 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
Checking PATCH 14/20: replay: flush rr queue before loading the vmstate...
WARNING: Block comments use a leading /* on a separate line #36: FILE: migration/savevm.c:2704:
+ /* Flush the record/replay queue. Now the VM state is going
WARNING: Block comments use * on subsequent lines
#37: FILE: migration/savevm.c:2705:
+ /* Flush the record/replay queue. Now the VM state is going
+ to change. Therefore we don't need to preserve its consistency */
WARNING: Block comments use a trailing */ on a separate line #37: FILE: migration/savevm.c:2705:
+ to change. Therefore we don't need to preserve its consistency */
total: 0 errors, 3 warnings, 26 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
Checking PATCH 15/20: gdbstub: add reverse step support in replay mode...
WARNING: Block comments use a leading /* on a separate line #66: FILE: exec.c:2743:
+ /* Don't process the watchpoints when we are
WARNING: Block comments use * on subsequent lines
#67: FILE: exec.c:2744:
+ /* Don't process the watchpoints when we are
+ in a reverse debugging operation. */
WARNING: Block comments use a trailing */ on a separate line #67: FILE: exec.c:2744:
+ in a reverse debugging operation. */
WARNING: Block comments use a leading /* on a separate line #92: FILE: gdbstub.c:340:
+ /* In replay mode all events written into the log should be replayed.
WARNING: Block comments use a leading /* on a separate line #171: FILE: include/sysemu/replay.h:76:
+/* Start making one step in backward direction.
WARNING: Block comments use * on subsequent lines
#172: FILE: include/sysemu/replay.h:77:
+/* Start making one step in backward direction.
+ Used by gdbstub for backwards debugging.
WARNING: Block comments use a trailing */ on a separate line #173: FILE: include/sysemu/replay.h:78:
+ Returns true on success. */
WARNING: Block comments use a leading /* on a separate line #175: FILE: include/sysemu/replay.h:80:
+/* Returns true if replay module is processing
WARNING: Block comments use * on subsequent lines
#176: FILE: include/sysemu/replay.h:81:
+/* Returns true if replay module is processing
+ reverse_continue or reverse_step request */
WARNING: Block comments use a trailing */ on a separate line #176: FILE: include/sysemu/replay.h:81:
+ reverse_continue or reverse_step request */
total: 0 errors, 10 warnings, 181 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 16/20: gdbstub: add reverse continue support in replay mode...
WARNING: Block comments use a leading /* on a separate line
#27: FILE: cpus.c:1113:
+ /* Report about the breakpoint and
WARNING: Block comments use * on subsequent lines
#28: FILE: cpus.c:1114:
+ /* Report about the breakpoint and
+ make a single step to skip it */
WARNING: Block comments use a trailing */ on a separate line #28: FILE: cpus.c:1114:
+ make a single step to skip it */
WARNING: Block comments use a leading /* on a separate line #81: FILE: include/sysemu/replay.h:80:
+/* Start searching the last breakpoint/watchpoint.
WARNING: Block comments use * on subsequent lines #82: FILE: include/sysemu/replay.h:81:
+/* Start searching the last breakpoint/watchpoint.
+ Used by gdbstub for backwards debugging.
WARNING: Block comments use a trailing */ on a separate line #83: FILE: include/sysemu/replay.h:82:
+ Returns true if the process successfully started. */
WARNING: Block comments use a leading /* on a separate line #129: FILE: replay/replay-debugging.c:272:
+ /* No breakpoints since the last snapshot.
WARNING: Block comments use * on subsequent lines
#130: FILE: replay/replay-debugging.c:273:
+ /* No breakpoints since the last snapshot.
+ Find previous snapshot and try again. */
WARNING: Block comments use a trailing */ on a separate line #130: FILE: replay/replay-debugging.c:273:
+ Find previous snapshot and try again. */
total: 0 errors, 9 warnings, 139 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 17/20: replay: describe reverse debugging in docs/replay.txt... Checking PATCH 18/20: replay: add BH oneshot event for block layer...
ERROR: "(foo*)" should be "(foo *)"
#66: FILE: replay/replay-events.c:41:
+ ((QEMUBHFunc*)event->opaque)(event->opaque2);
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #143:
new file mode 100644
total: 1 errors, 1 warnings, 97 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
Checking PATCH 19/20: replay: init rtc after enabling the replay... Checking PATCH 20/20: replay: document development rules...
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #13:
new file mode 100644
total: 0 errors, 1 warnings, 45 lines checked
Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20181218112056.11727.96529.stgit@pasha-VirtualBox/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]