Adding DTS to support STMPE811 ADC on Toradex Boards
cover Adding DTS to support STMPE811 ADC on Toradex Boards
From: Philippe Schenker <[email protected]>
Hello,
Recently the STMPE811 driver got pulled by MFD (for 5.1). This patches I'm sending are now adding support for STMPE811 ADC in devicetree. These patches have been in the STMPE811 ADC driver patchset but were not pulled by Lee, as they had no reviews and I also corrected some minor comment errors.
Philippe Schenker (2):
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++-------- 5 files changed, 70 insertions(+), 40 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/2 ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
From: Philippe Schenker <[email protected]>
Add the stmpe-adc DT node as found on Toradex iMX6 modules
---
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++-------- 2 files changed, 28 insertions(+), 16 deletions(-)
arch/arm/boot/dts/imx6qdl-apalis.dtsi +14 -8
@@ -332,11 +332,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -346,17 +352,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; };
arch/arm/boot/dts/imx6qdl-colibri.dtsi +14 -8
@@ -262,11 +262,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -276,17 +282,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; };
Signature · 1 line
2.20.1
PATCH 2/2 ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
In reply to Philippe SchenkerFrom: Philippe Schenker <[email protected]>
Add the stmpe-adc DT node as found on Toradex T30 modules
---
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++-------- 3 files changed, 42 insertions(+), 24 deletions(-)
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +14 -8
@@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*
arch/arm/boot/dts/tegra30-apalis.dtsi +14 -8
@@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*
arch/arm/boot/dts/tegra30-colibri.dtsi +14 -8
@@ -845,11 +845,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -859,17 +865,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*
Signature · 1 line
2.20.1
Re: [PATCH 1/2] ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
In reply to Philippe SchenkerQuoted 5 lines · Philippe Schenker
From: Philippe Schenker <[email protected]>
Add the stmpe-adc DT node as found on Toradex iMX6 modules
Signed-off-by Philippe Schenker <[email protected]>
Quoted 103 lines
---
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++-------- 2 files changed, 28 insertions(+), 16 deletions(-)arch/arm/boot/dts/imx6qdl-apalis.dtsi +14
-8@@ -332,11 +332,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */@@ -346,17 +352,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; };arch/arm/boot/dts/imx6qdl-colibri.dtsi +14
-8@@ -262,11 +262,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */@@ -276,17 +282,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; };
Re: [PATCH 2/2] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
In reply to Philippe SchenkerQuoted 5 lines · Philippe Schenker
From: Philippe Schenker <[email protected]>
Add the stmpe-adc DT node as found on Toradex T30 modules
Signed-off-by Philippe Schenker <[email protected]>
Quoted 155 lines
---
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++-------- 3 files changed, 42 insertions(+), 24 deletions(-)arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +14
-8@@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */@@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*arch/arm/boot/dts/tegra30-apalis.dtsi +14
-8@@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */@@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*arch/arm/boot/dts/tegra30-colibri.dtsi +14
-8@@ -845,11 +845,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */@@ -859,17 +865,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*
Shawn Guo
AppliedQuoted 3 lines · Philippe Schenker
Philippe Schenker (2):
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
Applied both, thanks.
Quoted 6 lines · Shawn Guo
Quoted 3 lines · Philippe Schenker
Philippe Schenker (2):
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add stmpe-adc DT node to Toradex T30 modulesApplied both, thanks.
Sorry, the T30 one shouldn't be applied by me. Dropped from my tree.
Shawn
Quoted 11 lines · Shawn Guo
Quoted 6 lines · Shawn Guo
Quoted 3 lines · Philippe Schenker
Philippe Schenker (2):
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add stmpe-adc DT node to Toradex T30 modulesApplied both, thanks.
Sorry, the T30 one shouldn't be applied by me. Dropped from my tree.
Shawn
@Thierry could you then please pull "ARM: dts: Add stmpe-adc DT node to Toradex T30 modules" ? Thanks a lot!
Philippe