Fixing record/replay and adding reverse debugging
Subsystems (2)
PATCH v11 3/25 replay: disable default snapshot for record/replay
In reply to Pavel DovgalyukFrom: Pavel Dovgalyuk <[email protected]>
This patch disables setting '-snapshot' option on by default in record/replay mode. This is needed for creating vmstates in record and replay modes.
--- vl.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
vl.c +8 -2
@@ -3196,7 +3196,13 @@ int main(int argc, char **argv, char **envp)drive_add (IF_PFLASH ,-1 , optarg,PFLASH_OPTS );break ;case QEMU_OPTION_snapshot: - snapshot =1 ; + { +Error *blocker =NULL ; + snapshot =1 ; +error_setg (&blocker,QERR_REPLAY_NOT_SUPPORTED , +"-snapshot" ); +replay_add_blocker (blocker); + }break ;case QEMU_OPTION_numa: opts = qemu_opts_parse_noisily(qemu_find_opts("numa"),
@@ -4465,7 +4471,7 @@ int main(int argc, char **argv, char **envp)qapi_free_BlockdevOptions (bdo->bdo);g_free (bdo); } -if (snapshot || replay_mode !=REPLAY_MODE_NONE ) { +if (snapshot) {qemu_opts_foreach (qemu_find_opts ("drive" ), drive_enable_snapshot,NULL ,NULL ); }
v11 cover Fixing record/replay and adding reverse debugging
GDB remote protocol supports reverse debugging of the targets. It includes 'reverse step' and 'reverse continue' operations. The first one finds the previous step of the execution, and the second one is intended to stop at the last breakpoint that would happen when the program is executed normally.
Reverse debugging is possible in the replay mode, when at least one snapshot was created at the record or replay phase. QEMU can use these snapshots for travelling back in time with GDB.
Running the execution in replay mode allows using GDB reverse debugging commands:
- reverse-stepi (or rsi): Steps one instruction to the past. QEMU loads on of the prior snapshots and proceeds to the desired instruction forward. When that step is reaches, execution stops.
- reverse-continue (or rc): Runs execution "backwards". QEMU tries to find breakpoint or watchpoint by loaded prior snapshot and replaying the execution. Then QEMU loads snapshots again and replays to the latest breakpoint. When there are no breakpoints in the examined section of the execution, QEMU finds one more snapshot and tries again. After the first snapshot is processed, execution stops at this snapshot.
The set of patches include the following modifications:
- gdbstub update for reverse debugging support
- functions that automatically perform reverse step and reverse continue operations
- hmp/qmp commands for manipulating the replay process
- improvement of the snapshotting for saving the execution step in the snapshot parameters
- other record/replay fixes
The patches are available in the repository:
https://github.com/ispras/qemu/tree/rr-190117
v11 changes:
- added can_do_io resetting before jumping to the next block in the chain
- rebase to the latest master
v10 changes:
- added patch for correct deadline calculation with external timers
- updated icount-related documentation in json files (suggested by Markus Armbruster)
- fixed replay shutdown
- renamed some functions and variables to make them consistent with the documentation and displayed messages
- minor changes
v9 changes:
- moved rr qapi stuff to the separate file (suggested by Markus Armbruster)
- minor coding style fixes
v8 changes:
- rebased to the new master
- added missing fix for prior rr patch
- updated 'since' version number in json-related patches
v7 changes:
- rebased to the new master with upstreamed patches from the series
- several improvements in hmp/qmp commands handling (suggested by Markus Armbruster)
- fixed record/replay with '-rtc base' option enabled
- added document with virtual hardware requirements
v6 changes:
- rebased to the new version of master
- fixed build of linux-user configurations
- added new clock for slirp and vnc timers
v5 changes:
- multiple fixes of record/replay bugs appeared after QEMU core update
- changed reverse debugging to 'since 3.1'
v4 changes:
- changed 'since 2.13' to 'since 3.0' in json (as suggested by Eric Blake)
v3 changes:
- Fixed PS/2 bug with save/load vm, which caused failures of the replay.
- Rebased to the new code base.
- Minor fixes.
v2 changes:
- documented reverse debugging
- fixed start vmstate loading in record mode
- documented qcow2 changes (as suggested by Eric Blake)
- made icount SnapshotInfo field optional (as suggested by Eric Blake)
- renamed qmp commands (as suggested by Eric Blake)
- minor changes
---
Pavel Dovgalyuk (24):
block: implement bdrv_snapshot_goto for blkreplay
replay: disable default snapshot for record/replay
replay: update docs for record/replay with block devices
replay: don't drain/flush bdrv queue while RR is working
replay: finish record/replay before closing the disks
qcow2: introduce icount field for snapshots
migration: introduce icount field for snapshots
replay: provide an accessor for rr filename
qapi: introduce replay.json for record/replay-related stuff
replay: introduce info hmp/qmp command
replay: introduce breakpoint at the specified step
replay: implement replay-seek command
replay: refine replay-time module
replay: flush rr queue before loading the vmstate
gdbstub: add reverse step support in replay mode
gdbstub: add reverse continue support in replay mode
replay: describe reverse debugging in docs/replay.txt
replay: add BH oneshot event for block layer
replay: init rtc after enabling the replay
replay: document development rules
util/qemu-timer: refactor deadline calculation for external timers
replay: fix replay shutdown
replay: rename step-related variables and functions
icount: clean up cpu_can_io before jumping to the next block
[email protected] (1):
replay: add missing fix for internal function
MAINTAINERS | 1 Makefile.objs | 4 - accel/tcg/tcg-runtime.c | 2 accel/tcg/translator.c | 1 block/blkreplay.c | 8 + block/block-backend.c | 8 + block/io.c | 32 ++++ block/iscsi.c | 5 - block/nfs.c | 5 - block/null.c | 4 - block/nvme.c | 6 + block/qapi.c | 18 ++ block/qcow2-snapshot.c | 9 + block/qcow2.h | 2 block/rbd.c | 5 - block/vxhs.c | 5 - blockdev.c | 10 + cpus.c | 30 +++- docs/devel/replay.txt | 46 ++++++ docs/interop/qcow2.txt | 4 + docs/replay.txt | 45 ++++++ exec.c | 8 + gdbstub.c | 52 +++++++ hmp-commands-info.hx | 14 ++ hmp-commands.hx | 53 +++++++ hmp.h | 4 + include/block/snapshot.h | 1 include/qemu/timer.h | 7 - include/sysemu/replay.h | 30 ++++ migration/savevm.c | 11 ++ qapi/block-core.json | 8 + qapi/block.json | 3 qapi/misc.json | 18 -- qapi/qapi-schema.json | 1 qapi/replay.json | 121 +++++++++++++++++ qtest.c | 2 replay/Makefile.objs | 3 replay/replay-debugging.c | 326 +++++++++++++++++++++++++++++++++++++++++++++ replay/replay-events.c | 18 ++ replay/replay-internal.c | 10 + replay/replay-internal.h | 17 +- replay/replay-snapshot.c | 6 - replay/replay-time.c | 36 ++--- replay/replay.c | 56 ++++++-- stubs/Makefile.objs | 1 stubs/replay-user.c | 9 + stubs/replay.c | 10 + tests/ptimer-test-stubs.c | 2 tests/ptimer-test.c | 4 - util/qemu-timer.c | 41 +++++- vl.c | 21 ++- 51 files changed, 1009 insertions(+), 134 deletions(-) create mode 100644 docs/devel/replay.txt create mode 100644 qapi/replay.json create mode 100644 replay/replay-debugging.c create mode 100644 stubs/replay-user.c
Signature · 1 line
Pavel Dovgalyuk
PATCH v11 1/25 replay: add missing fix for internal function
From: [email protected] <[email protected]>
This is a fix which was missed by patch 74c0b816adfc6aa1b01b4426fdf385e32e35cbac, which added current_step parameter to the replay_advance_current_step function.
--- replay/replay-internal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
replay/replay-internal.c +1 -1
@@ -229,7 +229,7 @@ void replay_mutex_unlock(void)void replay_advance_current_step (uint64_t current_step) { -int diff = (int )(replay_get_current_step () - replay_state.current_step); +int diff = (int )(current_step - replay_state.current_step);/* Time can only go forward */ assert (diff >=0 );
PATCH v11 2/25 block: implement bdrv_snapshot_goto for blkreplay
In reply to Pavel DovgalyukFrom: Pavel Dovgalyuk <[email protected]>
This patch enables making snapshots with blkreplay used in block devices.
This function is required to make bdrv_snapshot_goto without calling .bdrv_open which is not implemented.
--- block/blkreplay.c | 8 ++++++++ 1 file changed, 8 insertions(+)
block/blkreplay.c +8 -0
@@ -126,6 +126,12 @@ static int coroutine_fn blkreplay_co_flush(BlockDriverState *bs)return ret; } +static int blkreplay_snapshot_goto (BlockDriverState *bs, +const char *snapshot_id) +{ +return bdrv_snapshot_goto (bs->file->bs, snapshot_id,NULL ); +} +static BlockDriver bdrv_blkreplay = { .format_name ="blkreplay" , .instance_size =0 ,
@@ -140,6 +146,8 @@ static BlockDriver bdrv_blkreplay = { .bdrv_co_pwrite_zeroes = blkreplay_co_pwrite_zeroes, .bdrv_co_pdiscard = blkreplay_co_pdiscard, .bdrv_co_flush = blkreplay_co_flush, + + .bdrv_snapshot_goto = blkreplay_snapshot_goto, };static void bdrv_blkreplay_init (void )
PATCH v11 4/25 replay: update docs for record/replay with block devices
In reply to Pavel DovgalyukThis patch updates the description of the command lines for using record/replay with attached block devices.
--- docs/replay.txt | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
docs/replay.txt +9 -3
@@ -27,7 +27,7 @@ Usage of the record/replay: * First, record the execution with the following command line: qemu-system-i386 \ -icount shift=7,rr=record,rrfile=replay.bin \ - -drive file=disk.qcow2,if=none,id=img-direct \ + -drive file=disk.qcow2,if=none,snapshot,id=img-direct \ -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay \ -device ide-hd,drive=img-blkreplay \ -netdev user,id=net1 -device rtl8139,netdev=net1 \
@@ -35,7 +35,7 @@ Usage of the record/replay: * After recording, you can replay it by using another command line: qemu-system-i386 \ -icount shift=7,rr=replay,rrfile=replay.bin \ - -drive file=disk.qcow2,if=none,id=img-direct \ + -drive file=disk.qcow2,if=none,snapshot,id=img-direct \ -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay \ -device ide-hd,drive=img-blkreplay \ -netdev user,id=net1 -device rtl8139,netdev=net1 \
@@ -223,7 +223,7 @@ Block devices record/replay module intercepts calls of bdrv coroutine functions at the top of block drivers stack. To record and replay block operations the drive must be configured as following: - -drive file=disk.qcow2,if=none,id=img-direct + -drive file=disk.qcow2,if=none,snapshot,id=img-direct -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay -device ide-hd,drive=img-blkreplay
@@ -252,6 +252,12 @@ This snapshot is created at start of recording and restored at start of replaying. It also can be loaded while replaying to roll back the execution. +'snapshot' flag of the disk image must be removed to save the snapshots +in the overlay (or original image) instead of using the temporary overlay. + -drive file=disk.ovl,if=none,id=img-direct + -drive driver=blkreplay,if=none,image=img-direct,id=img-blkreplay + -device ide-hd,drive=img-blkreplay + Use QEMU monitor to create additional snapshots. 'savevm <name>' command created the snapshot and 'loadvm <name>' restores it. To prevent corruption of the original disk image, use overlay files linked to the original images.
PATCH v11 6/25 replay: finish record/replay before closing the disks
In reply to Pavel DovgalyukAfter recent updates block devices cannot be closed on qemu exit. This happens due to the block request polling when replay is not finished. Therefore now we stop execution recording before closing the block devices.
--- replay/replay.c | 2 ++ vl.c | 1 + 2 files changed, 3 insertions(+)
replay/replay.c +2 -0
@@ -385,6 +385,8 @@ void replay_finish(void)g_free (replay_snapshot); replay_snapshot =NULL ; + replay_mode =REPLAY_MODE_NONE ; +replay_finish_events (); }
vl.c +1 -0
@@ -4671,6 +4671,7 @@ int main(int argc, char **argv, char **envp)/* No more vcpu or device emulation activity beyond this point */ vm_shutdown (); +replay_finish ();job_cancel_sync_all ();bdrv_close_all ();
PATCH v11 5/25 replay: don't drain/flush bdrv queue while RR is working
In reply to Pavel DovgalyukIn record/replay mode bdrv queue is controlled by replay mechanism. It does not allow saving or loading the snapshots
when bdrv queue is not empty. Stopping the VM is not blocked by nonempty queue, but flushing the queue is still impossible there, because it may cause deadlocks in replay mode.
This patch disables bdrv_drain_all and bdrv_flush_all in record/replay mode.
Stopping the machine when the IO requests are not finished is needed for the debugging. E.g., breakpoint may be set at the specified step, and forcing the IO requests to finish may break the determinism of the execution.
--- block/io.c | 28 ++++++++++++++++++++++++++++ cpus.c | 2 -- 2 files changed, 28 insertions(+), 2 deletions(-)
block/io.c +28 -0
@@ -32,6 +32,7 @@#include "qemu/cutils.h" #include "qapi/error.h" #include "qemu/error-report.h" +#include "sysemu/replay.h" #define NOT_DONE 0x7fffffff/* used while emulated sync operation in progress */
@@ -538,6 +539,15 @@ void bdrv_drain_all_begin(void)return ; } +/* +* bdrv queue is managed by record/replay, +* waiting for finishing the I/O requests may +* be infinite +*/ +if (replay_events_enabled ()) { +return ; + } +/* AIO_WAIT_WHILE() with a NULL context can only be called from the main * loop AioContext, so make sure we're in the main context. */ assert (qemu_get_current_aio_context () ==qemu_get_aio_context ());
@@ -566,6 +576,15 @@ void bdrv_drain_all_end(void) {BlockDriverState *bs =NULL ; +/* +* bdrv queue is managed by record/replay, +* waiting for finishing the I/O requests may +* be endless +*/ +if (replay_events_enabled ()) { +return ; + } +while ((bs =bdrv_next_all_states (bs))) {AioContext *aio_context =bdrv_get_aio_context (bs);
@@ -1997,6 +2016,15 @@ int bdrv_flush_all(void)BlockDriverState *bs =NULL ;int result =0 ; +/* +* bdrv queue is managed by record/replay, +* creating new flush request for stopping +* the VM may break the determinism +*/ +if (replay_events_enabled ()) { +return result; + } +for (bs =bdrv_first (&it); bs; bs =bdrv_next (&it)) {AioContext *aio_context =bdrv_get_aio_context (bs);int ret;
cpus.c +0 -2
@@ -1078,7 +1078,6 @@ static int do_vm_stop(RunState state, bool send_stop) }bdrv_drain_all (); -replay_disable_events (); ret =bdrv_flush_all ();return ret;
@@ -2149,7 +2148,6 @@ int vm_prepare_start(void)/* We are sending this now, but the CPUs will be resumed shortly later */ qapi_event_send_resume (); -replay_enable_events ();cpu_enable_ticks ();runstate_set (RUN_STATE_RUNNING );vm_state_notify (1 ,RUN_STATE_RUNNING );
PATCH v11 7/25 qcow2: introduce icount field for snapshots
In reply to Pavel DovgalyukThis patch introduces the icount field for saving within the snapshot. It is required for navigation between the snapshots in record/replay mode.
--
v2:
- documented format changes in docs/interop/qcow2.txt (suggested by Eric Blake)
v10:
- updated the documentation
--- block/qcow2-snapshot.c | 7 +++++++ block/qcow2.h | 2 ++ docs/interop/qcow2.txt | 4 ++++ 3 files changed, 13 insertions(+)
block/qcow2-snapshot.c +7 -0
@@ -103,6 +103,12 @@ int qcow2_read_snapshots(BlockDriverState *bs) sn->disk_size = bs->total_sectors *BDRV_SECTOR_SIZE ; } +if (extra_data_size >=24 ) { + sn->icount =be64_to_cpu (extra.icount); + }else { + sn->icount =-1ULL ; + } +/* Read snapshot ID */ sn->id_str =g_malloc (id_str_size +1 ); ret =bdrv_pread (bs->file, offset, sn->id_str, id_str_size);
@@ -209,6 +215,7 @@ static int qcow2_write_snapshots(BlockDriverState *bs)memset (&extra,0 ,sizeof (extra)); extra.vm_state_size_large =cpu_to_be64 (sn->vm_state_size); extra.disk_size =cpu_to_be64 (sn->disk_size); + extra.icount =cpu_to_be64 (sn->icount); id_str_size =strlen (sn->id_str); name_size =strlen (sn->name);
block/qcow2.h +2 -0
@@ -159,6 +159,7 @@ typedef struct QEMU_PACKED QCowSnapshotHeader { typedef struct QEMU_PACKED QCowSnapshotExtraData {uint64_t vm_state_size_large;uint64_t disk_size; +uint64_t icount; } QCowSnapshotExtraData;
@@ -172,6 +173,7 @@ typedef struct QCowSnapshot {uint32_t date_sec;uint32_t date_nsec;uint64_t vm_clock_nsec; +uint64_t icount; } QCowSnapshot;struct Qcow2Cache ;
docs/interop/qcow2.txt +4 -0
@@ -540,6 +540,10 @@ Snapshot table entry: Byte 48 - 55: Virtual disk size of the snapshot in bytes + Byte 56 - 63: icount value which corresponds to + the record/replay instruction count + when the snapshot was taken + Version 3 images must include extra data at least up to byte 55.
PATCH v11 8/25 migration: introduce icount field for snapshots
In reply to Pavel DovgalyukSaving icount as a parameters of the snapshot allows navigation between them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding the recorded execution to the specific moment of the time. E.g., 'reverse step' action (introduced in one of the following patches) needs to load the nearest snapshot which is prior to the current moment of time .
--
v2:
- made icount in SnapshotInfo optional (suggested by Eric Blake)
v7:
- added more comments for icount member (suggested by Markus Armbruster)
v9:
- updated icount comment
v10:
- updated icount comment again
--- block/qapi.c | 18 ++++++++++++++---- block/qcow2-snapshot.c | 2 ++ blockdev.c | 10 ++++++++++ include/block/snapshot.h | 1 + migration/savevm.c | 5 +++++ qapi/block-core.json | 7 ++++++- qapi/block.json | 3 ++- 7 files changed, 40 insertions(+), 6 deletions(-)
block/qapi.c +14 -4
@@ -210,6 +210,8 @@ int bdrv_query_snapshot_info_list(BlockDriverState *bs, info->date_nsec = sn_tab[i].date_nsec; info->vm_clock_sec = sn_tab[i].vm_clock_nsec /1000000000 ; info->vm_clock_nsec = sn_tab[i].vm_clock_nsec %1000000000 ; + info->icount = sn_tab[i].icount; + info->has_icount = sn_tab[i].icount !=-1ULL ; info_list =g_new0 (SnapshotInfoList,1 ); info_list->value = info;
@@ -663,14 +665,15 @@ void bdrv_snapshot_dump(fprintf_function func_fprintf, void *f, QEMUSnapshotInfo *sn) {char buf1[128 ], date_buf[128 ], clock_buf[128 ]; +char icount_buf[128 ] = {0 };struct tm tm;time_t ti;int64_t secs;if (!sn) {func_fprintf (f, -"%-10s%-20s%7s%20s%15s" , -"ID" ,"TAG" ,"VM SIZE" ,"DATE" ,"VM CLOCK" ); +"%-10s%-18s%7s%20s%13s%11s" , +"ID" ,"TAG" ,"VM SIZE" ,"DATE" ,"VM CLOCK" ,"ICOUNT" ); }else { ti = sn->date_sec;localtime_r (&ti, &tm);
@@ -683,13 +686,18 @@ void bdrv_snapshot_dump(fprintf_function func_fprintf, void *f, (int )((secs /60 ) %60 ), (int )(secs %60 ), (int)((sn->vm_clock_nsec / 1000000) % 1000)); +if (sn->icount !=-1ULL ) { +snprintf (icount_buf,sizeof (icount_buf), +"%" PRId64, sn->icount); + }func_fprintf (f, -"%-10s%-20s%7s%20s%15s" , +"%-10s%-18s%7s%20s%13s%11s" , sn->id_str, sn->name,get_human_readable_size (buf1,sizeof (buf1), sn->vm_state_size), date_buf, - clock_buf); + clock_buf, + icount_buf); } }
@@ -857,6 +865,8 @@ void bdrv_image_info_dump(fprintf_function func_fprintf, void *f, .date_nsec = elem->value->date_nsec, .vm_clock_nsec = elem->value->vm_clock_sec *1000000000ULL + elem->value->vm_clock_nsec, + .icount = elem->value->has_icount ? + elem->value->icount : -1ULL, };pstrcpy (sn.id_str,sizeof (sn.id_str), elem->value->id);
block/qcow2-snapshot.c +2 -0
@@ -379,6 +379,7 @@ int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) sn->date_sec = sn_info->date_sec; sn->date_nsec = sn_info->date_nsec; sn->vm_clock_nsec = sn_info->vm_clock_nsec; + sn->icount = sn_info->icount;/* Allocate the L1 table of the snapshot and copy the current one there. */ l1_table_offset =qcow2_alloc_clusters (bs, s->l1_size *sizeof (uint64_t ));
@@ -698,6 +699,7 @@ int qcow2_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab) sn_info->date_sec = sn->date_sec; sn_info->date_nsec = sn->date_nsec; sn_info->vm_clock_nsec = sn->vm_clock_nsec; + sn_info->icount = sn->icount; } *psn_tab = sn_tab;return s->nb_snapshots;
blockdev.c +10 -0
@@ -57,6 +57,7 @@#include "block/trace.h" #include "sysemu/arch_init.h" #include "sysemu/qtest.h" +#include "sysemu/replay.h" #include "qemu/cutils.h" #include "qemu/help_option.h" #include "qemu/throttle-options.h"
@@ -1239,6 +1240,10 @@ SnapshotInfo *qmp_blockdev_snapshot_delete_internal_sync(const char *device, info->vm_state_size = sn.vm_state_size; info->vm_clock_nsec = sn.vm_clock_nsec %1000000000 ; info->vm_clock_sec = sn.vm_clock_nsec /1000000000 ; +if (sn.icount !=-1ULL ) { + info->icount = sn.icount; + info->has_icount = true; + }return info;
@@ -1447,6 +1452,11 @@ static void internal_snapshot_prepare(BlkActionState *common, sn->date_sec = tv.tv_sec; sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +if (replay_mode !=REPLAY_MODE_NONE ) { + sn->icount =replay_get_current_step (); + }else { + sn->icount =-1ULL ; + } ret1 =bdrv_snapshot_create (bs, sn);if (ret1 <0 ) {
include/block/snapshot.h +1 -0
@@ -42,6 +42,7 @@ typedef struct QEMUSnapshotInfo {uint32_t date_sec;/* UTC date of the snapshot */ uint32_t date_nsec;uint64_t vm_clock_nsec;/* VM clock relative to boot */ +uint64_t icount;/* record/replay step */ } QEMUSnapshotInfo; int bdrv_snapshot_find(BlockDriverState *bs, QEMUSnapshotInfo *sn_info,
migration/savevm.c +5 -0
@@ -2510,6 +2510,11 @@ int save_snapshot(const char *name, Error **errp) sn->date_sec = tv.tv_sec; sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +if (replay_mode !=REPLAY_MODE_NONE ) { + sn->icount =replay_get_current_step (); + }else { + sn->icount =-1ULL ; + }if (name) { ret =bdrv_snapshot_find (bs, old_sn, name);
qapi/block-core.json +6 -1
@@ -26,13 +26,18 @@ # # @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec # +# @icount: Current instruction count. Appears when execution record/replay +# is enabled. Used for "time-traveling" to match the moment +# in the recorded execution with the snapshots. (since 4.0) +# # Since: 1.3 # ## { 'struct': 'SnapshotInfo', 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', 'date-sec': 'int', 'date-nsec': 'int', - 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } } + 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int', + '*icount': 'int' } } ## # @ImageInfoSpecificQCow2EncryptionBase:
qapi/block.json +2 -1
@@ -176,7 +176,8 @@ # "date-sec": 1000012, # "date-nsec": 10, # "vm-clock-sec": 100, -# "vm-clock-nsec": 20 +# "vm-clock-nsec": 20, +# "icount": 220414 # } # } #
PATCH v11 9/25 replay: provide an accessor for rr filename
In reply to Pavel DovgalyukThis patch adds an accessor function for the name of the record/replay log file. Adding an accessor instead of making variable global, prevents accidental modification of this variable by other modules.
--- include/sysemu/replay.h | 2 ++ replay/replay.c | 5 +++++ 2 files changed, 7 insertions(+)
include/sysemu/replay.h +2 -0
@@ -71,6 +71,8 @@ void replay_start(void);void replay_finish (void );/*! Adds replay blocker with the specified error description */ void replay_add_blocker (Error *reason); +/* Returns name of the replay log file */ +const char *replay_get_filename (void );/* Processing the instructions */
replay/replay.c +5 -0
@@ -394,3 +394,8 @@ void replay_add_blocker(Error *reason) { replay_blockers =g_slist_prepend (replay_blockers, reason); } + +const char *replay_get_filename (void ) +{ +return replay_filename; +}
PATCH v11 10/25 qapi: introduce replay.json for record/replay-related stuff
In reply to Pavel DovgalyukThis patch adds replay.json file. It will be
used for adding record/replay-related data structures and commands.
--
v10:
- minor changes
--- MAINTAINERS | 1 + Makefile.objs | 4 ++-- include/sysemu/replay.h | 2 +- qapi/misc.json | 18 ------------------ qapi/qapi-schema.json | 1 + qapi/replay.json | 26 ++++++++++++++++++++++++++ 6 files changed, 31 insertions(+), 21 deletions(-) create mode 100644 qapi/replay.json
MAINTAINERS +1 -0
@@ -2132,6 +2132,7 @@ F: net/filter-replay.c F: include/sysemu/replay.h F: docs/replay.txt F: stubs/replay.c +F: qapi/replay.json IOVA Tree M: Peter Xu <[email protected]>
Makefile.objs +2 -2
@@ -1,6 +1,6 @@ QAPI_MODULES = block-core block char common crypto introspect job migration -QAPI_MODULES += misc net rdma rocker run-state sockets tpm trace transaction -QAPI_MODULES += ui +QAPI_MODULES += misc net rdma replay rocker run-state sockets tpm trace +QAPI_MODULES += transaction ui ####################################################################### # Common libraries for tools and emulators
include/sysemu/replay.h +1 -1
@@ -13,7 +13,7 @@*/ #include "sysemu.h" -#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-replay.h" #include "qapi/qapi-types-ui.h" /* replay clock kinds */
qapi/misc.json +0 -18
@@ -3161,24 +3161,6 @@ 'data': { 'offset': 'int' } } ## -# @ReplayMode: -# -# Mode of the replay subsystem. -# -# @none: normal execution mode. Replay or record are not enabled. -# -# @record: record mode. All non-deterministic data is written into the -# replay log. -# -# @play: replay mode. Non-deterministic data required for system execution -# is read from the log. -# -# Since: 2.5 -## -{ 'enum': 'ReplayMode', - 'data': [ 'none', 'record', 'play' ] } - -## # @xen-load-devices-state: # # Load the state of all devices from file. The RAM and the block devices
qapi/qapi-schema.json +1 -0
@@ -94,4 +94,5 @@ { 'include': 'transaction.json' } { 'include': 'trace.json' } { 'include': 'introspect.json' } +{ 'include': 'replay.json' } { 'include': 'misc.json' }
qapi/replay.json new file +26 -0
@@ -0,0 +1,26 @@ +# -*- Mode: Python -*- +# + +## +# = Record/replay +## + +{ 'include': 'common.json' } + +## +# @ReplayMode: +# +# Mode of the replay subsystem. +# +# @none: normal execution mode. Replay or record are not enabled. +# +# @record: record mode. All non-deterministic data is written into the +# replay log. +# +# @play: replay mode. Non-deterministic data required for system execution +# is read from the log. +# +# Since: 2.5 +## +{ 'enum': 'ReplayMode', + 'data': [ 'none', 'record', 'play' ] }
PATCH v11 11/25 replay: introduce info hmp/qmp command
In reply to Pavel DovgalyukThis patch introduces 'info replay' monitor command and corresponding qmp request.
These commands request the current record/replay mode, replay log file name, and the instruction count (number of recorded/replayed instructions). The instruction count can be used with the replay_seek/replay_break commands added in the next two patches.
--
v2:
- renamed info_replay qmp into query-replay (suggested by Eric Blake)
v7:
- added empty line (suggested by Markus Armbruster)
v9:
- changed 'step' parameter name to 'icount'
- moved json stuff to replay.json and updated the descriptions (suggested by Markus Armbruster)
v10:
- updated descriptions and messages for rr stuff
--- hmp-commands-info.hx | 14 ++++++++++++++ hmp.h | 1 + qapi/block-core.json | 3 ++- qapi/replay.json | 39 +++++++++++++++++++++++++++++++++++++++ replay/Makefile.objs | 3 ++- replay/replay-debugging.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 101 insertions(+), 2 deletions(-) create mode 100644 replay/replay-debugging.c
hmp-commands-info.hx +14 -0
@@ -918,6 +918,20 @@ STEXI Show SEV information. ETEXI + { + .name = "replay", + .args_type = "", + .params = "", + .help = "show record/replay information", + .cmd = hmp_info_replay, + }, + +STEXI +@item info replay +@findex info replay +Display the record/replay information: mode and the current icount. +ETEXI + STEXI @end table ETEXI
hmp.h +1 -0
@@ -148,5 +148,6 @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict);void hmp_info_vm_generation_id (Monitor *mon,const QDict *qdict);void hmp_info_memory_size_summary (Monitor *mon,const QDict *qdict);void hmp_info_sev (Monitor *mon,const QDict *qdict); +void hmp_info_replay (Monitor *mon,const QDict *qdict);#endif
qapi/block-core.json +2 -1
@@ -28,7 +28,8 @@ # # @icount: Current instruction count. Appears when execution record/replay # is enabled. Used for "time-traveling" to match the moment -# in the recorded execution with the snapshots. (since 4.0) +# in the recorded execution with the snapshots. This counter may +# be obtained through @query-replay command (since 4.0) # # Since: 1.3 #
qapi/replay.json +39 -0
@@ -24,3 +24,42 @@ ## { 'enum': 'ReplayMode', 'data': [ 'none', 'record', 'play' ] } + +## +# @ReplayInfo: +# +# Record/replay information. +# +# @mode: current mode. +# +# @filename: name of the record/replay log file. +# It is present only in record or replay modes, when the log +# is recorded or replayed. +# +# @icount: current number of executed instructions. +# +# Since: 4.0 +# +## +{ 'struct': 'ReplayInfo', + 'data': { 'mode': 'ReplayMode', '*filename': 'str', 'icount': 'int' } } + +## +# @query-replay: +# +# Retrieve the record/replay information. +# It includes current instruction count which may be used for +# @replay-break and @replay-seek commands. +# +# Returns: record/replay information. +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "query-replay" } +# <- { "return": { "mode": "play", "filename": "log.rr", "icount": 220414 } } +# +## +{ 'command': 'query-replay', + 'returns': 'ReplayInfo' }
replay/Makefile.objs +2 -1
@@ -6,4 +6,5 @@ common-obj-y += replay-input.o common-obj-y += replay-char.o common-obj-y += replay-snapshot.o common-obj-y += replay-net.o -common-obj-y += replay-audio.o +common-obj-y += replay-audio.o +common-obj-y += replay-debugging.o
replay/replay-debugging.c new file +43 -0
43 lines not on this page · raw message
PATCH v11 12/25 replay: introduce breakpoint at the specified step
In reply to Pavel DovgalyukThis patch introduces replay_break, replay_delete_break qmp and hmp commands.
These commands allow stopping at the specified instruction. It may be useful for debugging when there are some known events that should be investigated.replay_break command has one argument - number of instructions executed since the start of the replay. replay_delete_break removes previously set breakpoint.
--
v2:
- renamed replay_break qmp command into replay-break (suggested by Eric Blake)
v7:
- introduces replay_delete_break command
v9:
- changed 'step' parameter name to 'icount'
- moved json stuff to replay.json and updated the description (suggested by Markus Armbruster)
v10:
- updated descriptions (suggested by Markus Armbruster)
--- hmp-commands.hx | 34 ++++++++++++++++++ hmp.h | 2 + qapi/replay.json | 36 +++++++++++++++++++ replay/replay-debugging.c | 86 +++++++++++++++++++++++++++++++++++++++++++++ replay/replay-internal.h | 4 ++ replay/replay.c | 17 +++++++++ 6 files changed, 179 insertions(+)
hmp-commands.hx +34 -0
@@ -1890,6 +1890,40 @@ Set QOM property @var{property} of object at location @var{path} to value @var{v ETEXI { + .name = "replay_break", + .args_type = "icount:i", + .params = "icount", + .help = "set breakpoint at the specified instruction count", + .cmd = hmp_replay_break, + }, + +STEXI +@item replay_break @var{icount} +@findex replay_break +Set replay breakpoint at instruction count @var{icount}. +Execution stops when the specified instruction is reached. +There can be at most one breakpoint. When breakpoint is set, any prior +one is removed. The breakpoint may be set only in replay mode and only +"in the future", i.e. at instruction counts greater than the current one. +The current instruction count can be observed with 'info replay'. +ETEXI + + { + .name = "replay_delete_break", + .args_type = "", + .params = "", + .help = "removes replay breakpoint", + .cmd = hmp_replay_delete_break, + }, + +STEXI +@item replay_delete_break +@findex replay_delete_break +Remove replay breakpoint which was previously set with replay_break. +The command is ignored when there are no replay breakpoints. +ETEXI + + { .name = "info", .args_type = "item:s?", .params = "[subcommand]",
hmp.h +2 -0
@@ -149,5 +149,7 @@ void hmp_info_vm_generation_id(Monitor *mon, const QDict *qdict);void hmp_info_memory_size_summary (Monitor *mon,const QDict *qdict);void hmp_info_sev (Monitor *mon,const QDict *qdict);void hmp_info_replay (Monitor *mon,const QDict *qdict); +void hmp_replay_break (Monitor *mon,const QDict *qdict); +void hmp_replay_delete_break (Monitor *mon,const QDict *qdict);#endif
qapi/replay.json +36 -0
@@ -63,3 +63,39 @@ ## { 'command': 'query-replay', 'returns': 'ReplayInfo' } + +## +# @replay-break: +# +# Set replay breakpoint at instruction count @icount. +# Execution stops when the specified instruction is reached. +# There can be at most one breakpoint. When breakpoint is set, any prior +# one is removed. The breakpoint may be set only in replay mode and only +# "in the future", i.e. at instruction counts greater than the current one. +# The current instruction count can be observed with @query-replay. +# +# @icount: instruction count to stop at +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-break", "data": { "icount": 220414 } } +# +## +{ 'command': 'replay-break', 'data': { 'icount': 'int' } } + +## +# @replay-delete-break: +# +# Remove replay breakpoint which was set with @replay-break. +# The command is ignored when there are no replay breakpoints. +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-delete-break" } +# +## +{ 'command': 'replay-delete-break' }
replay/replay-debugging.c +86 -0
95 lines not on this page · raw message
replay/replay-internal.h +4 -0
@@ -91,6 +91,10 @@ extern ReplayState replay_state;/* File for replay writing */ extern FILE *replay_file; +/* Instruction count of the replay breakpoint */ +extern uint64_t replay_break_icount; +/* Timer for the replay breakpoint callback */ +extern QEMUTimer *replay_break_timer;void replay_put_byte (uint8_t byte);void replay_put_event (uint8_t event);
replay/replay.c +17 -0
@@ -34,6 +34,10 @@ static char *replay_filename;ReplayState replay_state;static GSList *replay_blockers; +/* Replay breakpoints */ +uint64_t replay_break_icount =-1ULL ; +QEMUTimer *replay_break_timer; +bool replay_next_event_is (int event) {bool res = false;
@@ -73,6 +77,13 @@ int replay_get_instructions(void)replay_mutex_lock ();if (replay_next_event_is (EVENT_INSTRUCTION )) { res = replay_state.instructions_count; +if (replay_break_icount !=-1LL ) { +uint64_t current =replay_get_current_step (); +assert (replay_break_icount >= current); +if (current + res > replay_break_icount) { + res = replay_break_icount - current; + } + } }replay_mutex_unlock ();return res;
@@ -99,6 +110,12 @@ void replay_account_executed_instructions(void)will be read from the log. */ qemu_notify_event (); } +/* Execution reached the break step */ +if (replay_break_icount == replay_state.current_step) { +/* Cannot make callback directly from the vCPU thread */ +timer_mod_ns (replay_break_timer, +qemu_clock_get_ns (QEMU_CLOCK_REALTIME )); + } } } }
PATCH v11 14/25 replay: refine replay-time module
In reply to Pavel DovgalyukThis patch removes refactoring artifacts from the replay/replay-time.c
--- replay/replay-time.c | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-)
replay/replay-time.c +16 -20
@@ -15,18 +15,19 @@#include "replay-internal.h" #include "qemu/error-report.h" -int64_t replay_save_clock (ReplayClockKind kind,int64_t clock,int64_t raw_icount) +int64_t replay_save_clock (ReplayClockKind kind,int64_t clock, +int64_t raw_icount) { -if (replay_file) { -g_assert (replay_mutex_locked ()); +g_assert (replay_file); +g_assert (replay_mutex_locked ()); -/* Due to the caller's locking requirements we get the icount from it -* instead of using replay_save_instructions(). -*/ -replay_advance_current_step (raw_icount); -replay_put_event (EVENT_CLOCK + kind); -replay_put_qword (clock); - } +/* +* Due to the caller's locking requirements we get the icount from it +* instead of using replay_save_instructions(). +*/ +replay_advance_current_step (raw_icount); +replay_put_event (EVENT_CLOCK + kind); +replay_put_qword (clock);return clock; }
@@ -48,20 +49,15 @@ void replay_read_next_clock(ReplayClockKind kind)/*! Reads next clock event from the input. */ int64_t replay_read_clock (ReplayClockKind kind) { +int64_t ret;g_assert (replay_file &&replay_mutex_locked ());replay_account_executed_instructions (); -if (replay_file) { -int64_t ret; -if (replay_next_event_is (EVENT_CLOCK + kind)) { -replay_read_next_clock (kind); - } - ret = replay_state.cached_clock[kind]; - -return ret; +if (replay_next_event_is (EVENT_CLOCK + kind)) { +replay_read_next_clock (kind); } + ret = replay_state.cached_clock[kind]; -error_report ("REPLAY INTERNAL ERROR %d" , __LINE__); -exit (1 ); +return ret; }
PATCH v11 13/25 replay: implement replay-seek command
In reply to Pavel DovgalyukThis patch adds hmp/qmp commands replay_seek/replay-seek that proceed the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution to find the desired instruction count.
--
v2:
- renamed replay_seek qmp command into replay-seek (suggested by Eric Blake)
v7:
- small fixes related to Markus Armbruster's review
v9:
- changed 'step' parameter name to 'icount'
- moved json stuff to replay.json and updated the description (suggested by Markus Armbruster)
v10:
- updated the descriptions
--- hmp-commands.hx | 19 +++++++++ hmp.h | 1 qapi/replay.json | 20 ++++++++++ replay/replay-debugging.c | 92 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 132 insertions(+)
hmp-commands.hx +19 -0
@@ -1924,6 +1924,25 @@ The command is ignored when there are no replay breakpoints. ETEXI { + .name = "replay_seek", + .args_type = "icount:i", + .params = "icount", + .help = "replay execution to the specified instruction count", + .cmd = hmp_replay_seek, + }, + +STEXI +@item replay_seek @var{icount} +@findex replay_seek +Automatically proceed to the instruction count @var{icount}, when +replaying the execution. The command automatically loads nearest +snapshot and replays the execution to find the desired instruction. +When there is no preceding snapshot or the execution is not replayed, +then the command fails. +icount for the reference may be observed with 'info replay' command. +ETEXI + + { .name = "info", .args_type = "item:s?", .params = "[subcommand]",
hmp.h +1 -0
@@ -151,5 +151,6 @@ void hmp_info_sev(Monitor *mon, const QDict *qdict);void hmp_info_replay (Monitor *mon,const QDict *qdict);void hmp_replay_break (Monitor *mon,const QDict *qdict);void hmp_replay_delete_break (Monitor *mon,const QDict *qdict); +void hmp_replay_seek (Monitor *mon,const QDict *qdict);#endif
qapi/replay.json +20 -0
@@ -99,3 +99,23 @@ # ## { 'command': 'replay-delete-break' } + +## +# @replay-seek: +# +# Automatically proceed to the instruction count @icount, when +# replaying the execution. The command automatically loads nearest +# snapshot and replays the execution to find the desired instruction. +# When there is no preceding snapshot or the execution is not replayed, +# then the command fails. +# icount for the reference may be obtained with @query-replay command. +# +# @icount: target instruction count +# +# Since: 4.0 +# +# Example: +# +# -> { "execute": "replay-seek", "data": { "icount": 220414 } } +## +{ 'command': 'replay-seek', 'data': { 'icount': 'int' } }
replay/replay-debugging.c +92 -0
101 lines not on this page · raw message
PATCH v11 15/25 replay: flush rr queue before loading the vmstate
In reply to Pavel DovgalyukNon-empty record/replay queue prevents saving and loading the VM state, because it includes pending bottom halves and block coroutines. But when the new VM state is loaded, we don't have to preserve the consistency of the current state anymore. Therefore this patch just flushes the queue allowing the coroutines to finish.
--- include/sysemu/replay.h | 2 ++ migration/savevm.c | 6 ++++++ replay/replay-internal.h | 2 -- 3 files changed, 8 insertions(+), 2 deletions(-)
include/sysemu/replay.h +2 -0
@@ -140,6 +140,8 @@ void replay_disable_events(void);void replay_enable_events (void );/*! Returns true when saving events is enabled */ bool replay_events_enabled (void ); +/* Flushes events queue */ +void replay_flush_events (void );/*! Adds bottom half event to the queue */ void replay_bh_schedule_event (QEMUBH *bh);/*! Adds input event to the queue */
migration/savevm.c +6 -0
@@ -2702,6 +2702,12 @@ int load_snapshot(const char *name, Error **errp)return -EINVAL ; } +/* +* Flush the record/replay queue. Now the VM state is going +* to change. Therefore we don't need to preserve its consistency +*/ +replay_flush_events (); +/* Flush all IO requests so they don't interfere with the new state. */ bdrv_drain_all_begin ();
replay/replay-internal.h +0 -2
@@ -146,8 +146,6 @@ void replay_read_next_clock(unsigned int kind);void replay_init_events (void );/*! Clears internal data structures for events handling */ void replay_finish_events (void ); -/*! Flushes events queue */ -void replay_flush_events (void );/*! Returns true if there are any unsaved events in the queue */ bool replay_has_events (void );/*! Saves events from queue into the file */
PATCH v11 16/25 gdbstub: add reverse step support in replay mode
In reply to Pavel DovgalyukGDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of the replay log.
--- accel/tcg/translator.c | 1 + cpus.c | 14 +++++++++++--- exec.c | 7 +++++++ gdbstub.c | 44 +++++++++++++++++++++++++++++++++++++++++--- include/sysemu/replay.h | 11 +++++++++++ replay/replay-debugging.c | 33 +++++++++++++++++++++++++++++++++ stubs/replay.c | 5 +++++ 7 files changed, 109 insertions(+), 6 deletions(-)
accel/tcg/translator.c +1 -0
@@ -17,6 +17,7 @@#include "exec/gen-icount.h" #include "exec/log.h" #include "exec/translator.h" +#include "sysemu/replay.h" /* Pairs with tcg_clear_temp_count. To be called by #TranslatorOps.{translate_insn,tb_stop} if
cpus.c +11 -3
@@ -1104,9 +1104,17 @@ static bool cpu_can_run(CPUState *cpu)static void cpu_handle_guest_debug (CPUState *cpu) { -gdb_set_stop_cpu (cpu); -qemu_system_debug_request (); - cpu->stopped = true; +if (!replay_running_debug ()) { +gdb_set_stop_cpu (cpu); +qemu_system_debug_request (); + cpu->stopped = true; + }else { +if (!cpu->singlestep_enabled) { +cpu_single_step (cpu,SSTEP_ENABLE ); + }else { +cpu_single_step (cpu,0 ); + } + } }#ifdef CONFIG_LINUX
exec.c +7 -0
@@ -2740,6 +2740,13 @@ static void check_watchpoint(int offset, int len, MemTxAttrs attrs, int flags) QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {if (cpu_watchpoint_address_matches (wp, vaddr, len) && (wp->flags & flags)) { +if (replay_running_debug ()) { +/* +* Don't process the watchpoints when we are +* in a reverse debugging operation. +*/ +return ; + }if (flags ==BP_MEM_READ ) { wp->flags |=BP_WATCHPOINT_HIT_READ ; }else {
gdbstub.c +41 -3
82 lines not on this page · raw message
include/sysemu/replay.h +11 -0
@@ -73,6 +73,17 @@ void replay_finish(void);void replay_add_blocker (Error *reason);/* Returns name of the replay log file */ const char *replay_get_filename (void ); +/* +* Start making one step in backward direction. +* Used by gdbstub for backwards debugging. +* Returns true on success. +*/ +bool replay_reverse_step (void ); +/* +* Returns true if replay module is processing +* reverse_continue or reverse_step request +*/ +bool replay_running_debug (void );/* Processing the instructions */
replay/replay-debugging.c +33 -0
@@ -21,6 +21,13 @@#include "block/snapshot.h" #include "migration/snapshot.h" +static bool replay_is_debugging; + +bool replay_running_debug (void ) +{ +return replay_is_debugging; +} +void hmp_info_replay (Monitor *mon,const QDict *qdict) {if (replay_mode ==REPLAY_MODE_NONE ) {
@@ -219,3 +226,29 @@ void hmp_replay_seek(Monitor *mon, const QDict *qdict)return ; } } + +static void replay_stop_vm_debug (void *opaque) +{ + replay_is_debugging = false; +vm_stop (RUN_STATE_DEBUG ); +replay_break (-1LL ,NULL ,NULL ); +} + +bool replay_reverse_step (void ) +{ +Error *err =NULL ; + +assert (replay_mode ==REPLAY_MODE_PLAY ); + +if (replay_get_current_step () !=0 ) { +replay_seek (replay_get_current_step () -1 , replay_stop_vm_debug, &err); +if (err) { +error_free (err); +return false; + } + replay_is_debugging = true; +return true; + } + +return false; +}
stubs/replay.c +5 -0
@@ -80,3 +80,8 @@ void replay_mutex_lock(void)void replay_mutex_unlock (void ) { } + +bool replay_reverse_step (void ) +{ +return false; +}
PATCH v11 17/25 gdbstub: add reverse continue support in replay mode
In reply to Pavel DovgalyukThis patch adds support of the reverse continue operation for gdbstub. Reverse continue finds the last breakpoint that would happen in normal execution from the beginning to the current moment. Implementation of the reverse continue replays the execution twice:
to find the breakpoints that were hit and to seek to the last breakpoint. Reverse continue loads the previous snapshot and tries to find the breakpoint since that moment. If there are no such breakpoints, it proceeds to the earlier snapshot, and so on. When no breakpoints or watchpoints were hit at all, execution stops at the beginning of the replay log.
--- cpus.c | 5 +++ exec.c | 1 + gdbstub.c | 10 ++++++ include/sysemu/replay.h | 8 +++++ replay/replay-debugging.c | 71 +++++++++++++++++++++++++++++++++++++++++++++ stubs/replay.c | 5 +++ 6 files changed, 99 insertions(+), 1 deletion(-)
cpus.c +5 -0
@@ -1110,6 +1110,11 @@ static void cpu_handle_guest_debug(CPUState *cpu) cpu->stopped = true; }else {if (!cpu->singlestep_enabled) { +/* +* Report about the breakpoint and +* make a single step to skip it +*/ +replay_breakpoint ();cpu_single_step (cpu,SSTEP_ENABLE ); }else {cpu_single_step (cpu,0 );
exec.c +1 -0
@@ -2745,6 +2745,7 @@ static void check_watchpoint(int offset, int len, MemTxAttrs attrs, int flags)* Don't process the watchpoints when we are * in a reverse debugging operation. */ +replay_breakpoint ();return ; }if (flags ==BP_MEM_READ ) {
gdbstub.c +9 -1
@@ -1439,6 +1439,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s,"E14" );break ; } +case 'c' : +if (replay_reverse_continue ()) { +gdb_continue (s); +return RS_IDLE ; + }else { +put_packet (s,"E14" ); +break ; + }default : goto unknown_command; }
@@ -1749,7 +1757,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)pstrcat (buf,sizeof (buf),";multiprocess+" );if (replay_mode ==REPLAY_MODE_PLAY ) { -pstrcat (buf,sizeof (buf),";ReverseStep+" ); +pstrcat (buf,sizeof (buf),";ReverseStep+;ReverseContinue+" ); }put_packet (s, buf);
include/sysemu/replay.h +8 -0
@@ -80,10 +80,18 @@ const char *replay_get_filename(void);*/ bool replay_reverse_step (void );/* +* Start searching the last breakpoint/watchpoint. +* Used by gdbstub for backwards debugging. +* Returns true if the process successfully started. +*/ +bool replay_reverse_continue (void ); +/* * Returns true if replay module is processing * reverse_continue or reverse_step request */ bool replay_running_debug (void ); +/* Called in reverse debugging mode to collect breakpoint information */ +void replay_breakpoint (void );/* Processing the instructions */
replay/replay-debugging.c +71 -0
80 lines not on this page · raw message
stubs/replay.c +5 -0
@@ -85,3 +85,8 @@ bool replay_reverse_step(void) {return false; } + +bool replay_reverse_continue (void ) +{ +return false; +}
PATCH v11 18/25 replay: describe reverse debugging in docs/replay.txt
In reply to Pavel DovgalyukThis patch updates the documentation and describes usage of the reverse debugging in QEMU+GDB.
--- docs/replay.txt | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
docs/replay.txt +33 -0
@@ -293,6 +293,39 @@ for recording and replaying must contain identical number of ports in record and replay modes, but their backends may differ. E.g., '-serial stdio' in record mode, and '-serial null' in replay mode. +Reverse debugging +----------------- + +Reverse debugging allows "executing" the program in reverse direction. +GDB remote protocol supports "reverse step" and "reverse continue" +commands. The first one steps single instruction backwards in time, +and the second one finds the last breakpoint in the past. + +Recorded executions may be used to enable reverse debugging. QEMU can't +execute the code in backwards direction, but can load a snapshot and +replay forward to find the desired position or breakpoint. + +The following GDB commands are supported: + - reverse-stepi (or rsi) - step one instruction backwards + - reverse-continue (or rc) - find last breakpoint in the past + +Reverse step loads the nearest snapshot and replays the execution until +the required instruction is met. + +Reverse continue may include several passes of examining the execution +between the snapshots. Each of the passes include the following steps: + 1. loading the snapshot + 2. replaying to examine the breakpoints + 3. if breakpoint or watchpoint was met + - loading the snaphot again + - replaying to the required breakpoint + 4. else + - proceeding to the p.1 with the earlier snapshot + +Therefore usage of the reverse debugging requires at least one snapshot +created in advance. See the "Snapshotting" section to learn about running +record/replay and creating the snapshot in these modes. + Replay log format -----------------
PATCH v11 19/25 replay: add BH oneshot event for block layer
In reply to Pavel DovgalyukReplay is capable of recording normal BH events, but sometimes there are single use callbacks scheduled with aio_bh_schedule_oneshot function. This patch enables recording and replaying such callbacks. Block layer uses these events for calling the completion function. Replaying these calls makes the execution deterministic.
--
v6:
- moved stub function to the separate file for fixing linux-user build
v10:
- replaced all block layer aio_bh_schedule_oneshot calls
--- block/block-backend.c | 8 +++++--- block/io.c | 4 ++-- block/iscsi.c | 5 +++-- block/nfs.c | 5 +++-- block/null.c | 4 +++- block/nvme.c | 6 ++++-- block/rbd.c | 5 +++-- block/vxhs.c | 5 +++-- include/sysemu/replay.h | 3 +++ replay/replay-events.c | 16 ++++++++++++++++ replay/replay-internal.h | 1 + replay/replay.c | 2 +- stubs/Makefile.objs | 1 + stubs/replay-user.c | 9 +++++++++ 14 files changed, 57 insertions(+), 17 deletions(-) create mode 100644 stubs/replay-user.c
block/block-backend.c +5 -3
@@ -17,6 +17,7 @@#include "block/throttle-groups.h" #include "sysemu/blockdev.h" #include "sysemu/sysemu.h" +#include "sysemu/replay.h" #include "qapi/error.h" #include "qapi/qapi-events-block.h" #include "qemu/id.h"
@@ -1324,7 +1325,8 @@ BlockAIOCB *blk_abort_aio_request(BlockBackend *blk, acb->blk = blk; acb->ret = ret; -aio_bh_schedule_oneshot (blk_get_aio_context (blk), error_callback_bh, acb); +replay_bh_schedule_oneshot_event (blk_get_aio_context (blk), + error_callback_bh, acb);return &acb->common; }
@@ -1380,8 +1382,8 @@ static BlockAIOCB *blk_aio_prwv(BlockBackend *blk, int64_t offset, int bytes, acb->has_returned = true;if (acb->rwco.ret !=NOT_DONE ) { -aio_bh_schedule_oneshot (blk_get_aio_context (blk), - blk_aio_complete_bh, acb); +replay_bh_schedule_oneshot_event (blk_get_aio_context (blk), + blk_aio_complete_bh, acb); }return &acb->common;
block/io.c +2 -2
@@ -340,8 +340,8 @@ static void coroutine_fn bdrv_co_yield_to_drain(BlockDriverState *bs,if (bs) {bdrv_inc_in_flight (bs); } -aio_bh_schedule_oneshot (bdrv_get_aio_context (bs), - bdrv_co_drain_bh_cb, &data); +replay_bh_schedule_oneshot_event (bdrv_get_aio_context (bs), + bdrv_co_drain_bh_cb, &data);qemu_coroutine_yield ();/* If we are resumed from some other event (such as an aio completion or a
block/iscsi.c +3 -2
@@ -38,6 +38,7 @@#include "qemu/iov.h" #include "qemu/option.h" #include "qemu/uuid.h" +#include "sysemu/replay.h" #include "qapi/error.h" #include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qdict.h"
@@ -275,8 +276,8 @@ iscsi_co_generic_cb(struct iscsi_context *iscsi, int status, out:if (iTask->co) { -aio_bh_schedule_oneshot (iTask->iscsilun->aio_context, - iscsi_co_generic_bh_cb, iTask); +replay_bh_schedule_oneshot_event (iTask->iscsilun->aio_context, + iscsi_co_generic_bh_cb, iTask); }else { iTask->complete =1 ; }
block/nfs.c +3 -2
@@ -36,6 +36,7 @@#include "qemu/uri.h" #include "qemu/cutils.h" #include "sysemu/sysemu.h" +#include "sysemu/replay.h" #include "qapi/qapi-visit-block-core.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qstring.h"
@@ -256,8 +257,8 @@ nfs_co_generic_cb(int ret, struct nfs_context *nfs, void *data,if (task->ret <0 ) {error_report ("NFS Error: %s" ,nfs_get_error (nfs)); } -aio_bh_schedule_oneshot (task->client->aio_context, - nfs_co_generic_bh_cb, task); +replay_bh_schedule_oneshot_event (task->client->aio_context, + nfs_co_generic_bh_cb, task); } static int coroutine_fn nfs_co_preadv(BlockDriverState *bs, uint64_t offset,
block/null.c +3 -1
@@ -16,6 +16,7 @@#include "qapi/qmp/qstring.h" #include "qemu/option.h" #include "block/block_int.h" +#include "sysemu/replay.h" #define NULL_OPT_LATENCY "latency-ns"#define NULL_OPT_ZEROES "read-zeroes"
@@ -178,7 +179,8 @@ static inline BlockAIOCB *null_aio_common(BlockDriverState *bs,timer_mod_ns (&acb->timer,qemu_clock_get_ns (QEMU_CLOCK_REALTIME ) + s->latency_ns); }else { -aio_bh_schedule_oneshot (bdrv_get_aio_context (bs), null_bh_cb, acb); +replay_bh_schedule_oneshot_event (bdrv_get_aio_context (bs), + null_bh_cb, acb); }return &acb->common; }
block/nvme.c +4 -2
@@ -21,6 +21,7 @@#include "qemu/option.h" #include "qemu/vfio-helpers.h" #include "block/block_int.h" +#include "sysemu/replay.h" #include "trace.h" #include "block/nvme.h"
@@ -346,7 +347,8 @@ static bool nvme_process_completion(BDRVNVMeState *s, NVMeQueuePair *q)smp_mb_release (); *q->cq.doorbell =cpu_to_le32 (q->cq.head);if (!qemu_co_queue_empty (&q->free_req_queue)) { -aio_bh_schedule_oneshot (s->aio_context, nvme_free_req_queue_cb, q); +replay_bh_schedule_oneshot_event (s->aio_context, + nvme_free_req_queue_cb, q); } } q->busy = false;
@@ -896,7 +898,7 @@ static void nvme_rw_cb(void *opaque, int ret)/* The rw coroutine hasn't yielded, don't try to enter. */ return ; } -aio_bh_schedule_oneshot (data->ctx, nvme_rw_cb_bh, data); +replay_bh_schedule_oneshot_event (data->ctx, nvme_rw_cb_bh, data); } static coroutine_fn int nvme_co_prw_aligned(BlockDriverState *bs,
block/rbd.c +3 -2
@@ -21,6 +21,7 @@#include "block/qdict.h" #include "crypto/secret.h" #include "qemu/cutils.h" +#include "sysemu/replay.h" #include "qapi/qmp/qstring.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qjson.h"
@@ -858,8 +859,8 @@ static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb) rcb->ret =rbd_aio_get_return_value (c);rbd_aio_release (c); -aio_bh_schedule_oneshot (bdrv_get_aio_context (acb->common.bs), - rbd_finish_bh, rcb); +replay_bh_schedule_oneshot_event (bdrv_get_aio_context (acb->common.bs), + rbd_finish_bh, rcb); } static int rbd_aio_discard_wrapper(rbd_image_t image,
block/vxhs.c +3 -2
@@ -21,6 +21,7 @@#include "qapi/error.h" #include "qemu/uuid.h" #include "crypto/tlscredsx509.h" +#include "sysemu/replay.h" #define VXHS_OPT_FILENAME "filename"#define VXHS_OPT_VDISK_ID "vdisk-id"
@@ -104,8 +105,8 @@ static void vxhs_iio_callback(void *ctx, uint32_t opcode, uint32_t error)trace_vxhs_iio_callback (error); } -aio_bh_schedule_oneshot (bdrv_get_aio_context (acb->common.bs), - vxhs_complete_aio_bh, acb); +replay_bh_schedule_oneshot_event (bdrv_get_aio_context (acb->common.bs), + vxhs_complete_aio_bh, acb);break ;default :
include/sysemu/replay.h +3 -0
@@ -163,6 +163,9 @@ bool replay_events_enabled(void);void replay_flush_events (void );/*! Adds bottom half event to the queue */ void replay_bh_schedule_event (QEMUBH *bh); +/* Adds oneshot bottom half event to the queue */ +void replay_bh_schedule_oneshot_event (AioContext *ctx, +QEMUBHFunc *cb,void *opaque);/*! Adds input event to the queue */ void replay_input_event (QemuConsole *src,InputEvent *evt);/*! Adds input sync event to the queue */
replay/replay-events.c +16 -0
@@ -37,6 +37,9 @@ static void replay_run_event(Event *event)case REPLAY_ASYNC_EVENT_BH :aio_bh_call (event->opaque);break ; +case REPLAY_ASYNC_EVENT_BH_ONESHOT : + ((QEMUBHFunc *)event->opaque)(event->opaque2); +break ;case REPLAY_ASYNC_EVENT_INPUT :qemu_input_event_send_impl (NULL , (InputEvent *)event->opaque);qapi_free_InputEvent ((InputEvent *)event->opaque);
@@ -132,6 +135,17 @@ void replay_bh_schedule_event(QEMUBH *bh) } } +void replay_bh_schedule_oneshot_event (AioContext *ctx, +QEMUBHFunc *cb,void *opaque) +{ +if (events_enabled) { +uint64_t id =replay_get_current_step (); +replay_add_event (REPLAY_ASYNC_EVENT_BH_ONESHOT , cb, opaque, id); + }else { +aio_bh_schedule_oneshot (ctx, cb, opaque); + } +} +void replay_add_input_event (struct InputEvent *event) {replay_add_event (REPLAY_ASYNC_EVENT_INPUT , event,NULL ,0 );
@@ -162,6 +176,7 @@ static void replay_save_event(Event *event, int checkpoint)/* save event-specific data */ switch (event->event_kind) {case REPLAY_ASYNC_EVENT_BH : +case REPLAY_ASYNC_EVENT_BH_ONESHOT :replay_put_qword (event->id);break ;case REPLAY_ASYNC_EVENT_INPUT :
@@ -217,6 +232,7 @@ static Event *replay_read_event(int checkpoint)/* Events that has not to be in the queue */ switch (replay_state.read_event_kind) {case REPLAY_ASYNC_EVENT_BH : +case REPLAY_ASYNC_EVENT_BH_ONESHOT :if (replay_state.read_event_id ==-1 ) { replay_state.read_event_id =replay_get_qword (); }
replay/replay-internal.h +1 -0
@@ -51,6 +51,7 @@ enum ReplayEvents {enum ReplayAsyncEventKind {REPLAY_ASYNC_EVENT_BH , +REPLAY_ASYNC_EVENT_BH_ONESHOT ,REPLAY_ASYNC_EVENT_INPUT ,REPLAY_ASYNC_EVENT_INPUT_SYNC ,REPLAY_ASYNC_EVENT_CHAR_READ ,
replay/replay.c +1 -1
@@ -22,7 +22,7 @@/* Current version of the replay mechanism. Increase it when file format changes. */ -#define REPLAY_VERSION 0xe02007 +#define REPLAY_VERSION 0xe02008/* Size of replay log header */ #define HEADER_SIZE (sizeof(uint32_t) + sizeof(uint64_t))
stubs/Makefile.objs +1 -0
@@ -24,6 +24,7 @@ stub-obj-y += monitor.o stub-obj-y += notify-event.o stub-obj-y += qtest.o stub-obj-y += replay.o +stub-obj-y += replay-user.o stub-obj-y += runstate-check.o stub-obj-y += set-fd-handler.o stub-obj-y += slirp.o
stubs/replay-user.c new file +9 -0
@@ -0,0 +1,9 @@ +#include "qemu/osdep.h" +#include "sysemu/replay.h" +#include "sysemu/sysemu.h" + +void replay_bh_schedule_oneshot_event (AioContext *ctx, +QEMUBHFunc *cb,void *opaque) +{ +aio_bh_schedule_oneshot (ctx, cb, opaque); +}
PATCH v11 20/25 replay: init rtc after enabling the replay
In reply to Pavel DovgalyukThis patch postpones the call of 'configure_rtc' function. This call uses host clock to configure the rtc, but host clock access should be recorded when using icount record/replay mode. Therefore now rtc is configured after switching record/replay mode on.
--- vl.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
vl.c +7 -3
@@ -3008,6 +3008,7 @@ int main(int argc, char **argv, char **envp)DisplayState *ds;QemuOpts *opts, *machine_opts;QemuOpts *icount_opts =NULL , *accel_opts =NULL ; +QemuOpts *rtc_opts =NULL ;QemuOptsList *olist;int optind;const char *optarg;
@@ -3814,9 +3815,9 @@ int main(int argc, char **argv, char **envp)warn_report ("This option is ignored and will be removed soon" );break ;case QEMU_OPTION_rtc: - opts =qemu_opts_parse_noisily (qemu_find_opts ("rtc" ), optarg, - false); -if (!opts) { + rtc_opts =qemu_opts_parse_noisily (qemu_find_opts ("rtc" ), + optarg, false); +if (!rtc_opts) {exit (1 ); }break ;
@@ -4022,6 +4023,9 @@ int main(int argc, char **argv, char **envp)loc_set_none ();replay_configure (icount_opts); +if (rtc_opts) { +configure_rtc (rtc_opts); + }if (incoming && !preconfig_exit_requested) { error_report("'preconfig' and 'incoming' options are "
PATCH v11 21/25 replay: document development rules
In reply to Pavel DovgalyukThis patch introduces docs/devel/replay.txt which describes the rules that should be followed to make virtual devices usable in record/replay mode.
--
v9: fixed external virtual clock description (reported by Artem Pisarenko)
--- docs/devel/replay.txt | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 docs/devel/replay.txt
docs/devel/replay.txt new file +46 -0
@@ -0,0 +1,46 @@ +Record/replay mechanism, that could be enabled through icount mode, expects +the virtual devices to satisfy the following requirements. + +The main idea behind this document is that everything that affects +the guest state during execution in icount mode should be deterministic. + +Timers +====== + +All virtual devices should use virtual clock for timers that change the guest +state. Virtual clock is deterministic, therefore such timers are deterministic +too. + +Virtual devices can also use realtime clock for the events that do not change +the guest state directly. When the clock ticking should depend on VM execution +speed, use virtual clock with EXTERNAL attribute. It is not deterministic, +but its speed depends on the guest execution. This clock is used by +the virtual devices (e.g., slirp routing device) that lie outside the +replayed guest. + +Bottom halves +============= + +Bottom half callbacks, that affect the guest state, should be invoked through +replay_bh_schedule_event or replay_bh_schedule_oneshot_event functions. +Their invocations are saved in record mode and synchronized with the existing +log in replay mode. + +Saving/restoring the VM state +============================= + +All fields in the device state structure (including virtual timers) +should be restored by loadvm to the same values they had before savevm. + +Avoid accessing other devices' state, because the order of saving/restoring +is not defined. It means that you should not call functions like +'update_irq' in post_load callback. Save everything explicitly to avoid +the dependencies that may make restoring the VM state non-deterministic. + +Stopping the VM +=============== + +Stopping the guest should not interfere with its state (with the exception +of the network connections, that could be broken by the remote timeouts). +VM can be stopped at any moment of replay by the user. Restarting the VM +after that stop should not break the replay by the unneeded guest state change.
PATCH v11 22/25 util/qemu-timer: refactor deadline calculation for external timers
In reply to Pavel Dovgalyukicount-based record/replay uses qemu_clock_deadline_ns_all to measure the period until vCPU may be interrupted.
This function takes in account the virtual timers, because they belong to the virtual devices that may generate interrupt request or affect the virtual machine state.
However, there are a subset of virtual timers, that are marked with 'external' flag. These do not change the virtual machine state and only based on virtual clock. Calculating the deadling using the external timers breaks the determinism, because they do not belong to the replayed part of the virtual machine.
This patch fixes the deadline calculation for this case.
--- cpus.c | 9 ++++----- include/qemu/timer.h | 7 +++---- qtest.c | 2 +- tests/ptimer-test-stubs.c | 2 +- tests/ptimer-test.c | 4 ++-- util/qemu-timer.c | 41 +++++++++++++++++++++++++++++++++-------- 6 files changed, 44 insertions(+), 21 deletions(-)
cpus.c +4 -5
@@ -550,7 +550,7 @@ void qtest_clock_warp(int64_t dest)assert (qtest_enabled ()); aio_context =qemu_get_aio_context ();while (clock < dest) { -int64_t deadline =qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); +int64_t deadline =virtual_clock_deadline_ns ();int64_t warp =qemu_soonest_timeout (dest - clock, deadline); seqlock_write_lock(&timers_state.vm_clock_seqlock,
@@ -610,7 +610,7 @@ void qemu_start_warp_timer(void)/* We want to use the earliest deadline from ALL vm_clocks */ clock =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL_RT ); - deadline =qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); + deadline =virtual_clock_deadline_ns ();if (deadline <0 ) {static bool notified;if (!icount_sleep && !notified) {
@@ -1355,7 +1355,7 @@ static int64_t tcg_get_icount_limit(void)int64_t deadline;if (replay_mode !=REPLAY_MODE_PLAY ) { - deadline =qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); + deadline =virtual_clock_deadline_ns ();/* Maintain prior (possibly buggy) behaviour where if no deadline * was set (as there is no QEMU_CLOCK_VIRTUAL timer) or it is more than
@@ -1376,8 +1376,7 @@ static void handle_icount_deadline(void) {assert (qemu_in_vcpu_thread ());if (use_icount) { -int64_t deadline = -qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); +int64_t deadline =virtual_clock_deadline_ns ();if (deadline ==0 ) {/* Wake up other AioContexts. */
include/qemu/timer.h +3 -4
@@ -176,16 +176,15 @@ bool qemu_clock_expired(QEMUClockType type);bool qemu_clock_use_for_deadline (QEMUClockType type);/** -* qemu_clock_deadline_ns_all: -* @type: the clock type +* virtual_clock_deadline_ns: * * Calculate the deadline across all timer lists associated -* with a clock (as opposed to just the default one) +* with virtual clock (excluding external timers) * in nanoseconds, or -1 if no timer is set to expire. * * Returns: time until expiry in nanoseconds or -1 */ -int64_t qemu_clock_deadline_ns_all (QEMUClockType type); +int64_t virtual_clock_deadline_ns (void );/** * qemu_clock_get_main_loop_timerlist:
qtest.c +1 -1
@@ -655,7 +655,7 @@ static void qtest_process_command(CharBackend *chr, gchar **words)int ret =qemu_strtoi64 (words[1 ],NULL ,0 , &ns);g_assert (ret ==0 ); }else { - ns =qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); + ns =virtual_clock_deadline_ns (); }qtest_clock_warp (qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + ns);qtest_send_prefix (chr);
tests/ptimer-test-stubs.c +1 -1
@@ -88,7 +88,7 @@ int64_t qemu_clock_get_ns(QEMUClockType type)return ptimer_test_time_ns; } -int64_t qemu_clock_deadline_ns_all (QEMUClockType type) +int64_t virtual_clock_deadline_ns (void ) {QEMUTimerList *timer_list = main_loop_tlg.tl[type];QEMUTimer *t = timer_list->active_timers.next;
tests/ptimer-test.c +2 -2
@@ -50,13 +50,13 @@ static void ptimer_test_set_qemu_time_ns(int64_t ns)static void qemu_clock_step (uint64_t ns) { -int64_t deadline =qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); +int64_t deadline =virtual_clock_deadline_ns ();int64_t advanced_time =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + ns;while (deadline !=-1 && deadline <= advanced_time) {ptimer_test_set_qemu_time_ns (deadline);ptimer_test_expire_qemu_timers (deadline,QEMU_CLOCK_VIRTUAL ); - deadline =qemu_clock_deadline_ns_all (QEMU_CLOCK_VIRTUAL ); + deadline =virtual_clock_deadline_ns (); }ptimer_test_set_qemu_time_ns (advanced_time);
util/qemu-timer.c +33 -8
58 lines not on this page · raw message
PATCH v11 23/25 replay: fix replay shutdown
In reply to Pavel DovgalyukThis patch fixes shutdown of the replay process, which is terminated with the assert when shutdown event is read from the log. replay_finish_event reads new data_kind and therefore the value of data_kind should be preserved to be valid at qemu_system_shutdown_request call.
--- replay/replay.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
replay/replay.c +4 -4
@@ -49,14 +49,14 @@ bool replay_next_event_is(int event) }while (true) { -if (event == replay_state.data_kind) { +unsigned int data_kind = replay_state.data_kind; +if (event == data_kind) { res = true; } -switch (replay_state.data_kind) { +switch (data_kind) { case EVENT_SHUTDOWN ... EVENT_SHUTDOWN_LAST:replay_finish_event (); -qemu_system_shutdown_request (replay_state.data_kind - -EVENT_SHUTDOWN ); +qemu_system_shutdown_request (data_kind -EVENT_SHUTDOWN );break ;default :/* clock, time_t, checkpoint and other events */
PATCH v11 25/25 icount: clean up cpu_can_io before jumping to the next block
In reply to Pavel DovgalyukMost of IO instructions can be executed only at the end of the block in icount mode. Therefore translator can set cpu_can_io flag when translating the last instruction.
But when the blocks are chained, then this flag is not reset and may remain set at the beginning of the next block.
This patch resets the flag before "chaining" the translation blocks.
--- accel/tcg/tcg-runtime.c | 2 ++ 1 file changed, 2 insertions(+)
accel/tcg/tcg-runtime.c +2 -0
@@ -151,6 +151,8 @@ void *HELPER(lookup_tb_ptr)(CPUArchState *env)target_ulong cs_base, pc;uint32_t flags; +/* We are going to jump to the next block. can_do_io should be reset */ + cpu->can_do_io = !use_icount; tb =tb_lookup__cpu_state (cpu, &pc, &cs_base, &flags,curr_cflags ());if (tb ==NULL ) {return tcg_ctx->code_gen_epilogue;
PATCH v11 24/25 replay: rename step-related variables and functions
In reply to Pavel DovgalyukThis patch renames replay_get_current_step() and related variables to make these names consistent with hmp/qmp commands.
--- blockdev.c | 2 +- include/sysemu/replay.h | 2 +- migration/savevm.c | 2 +- replay/replay-debugging.c | 29 +++++++++++++++-------------- replay/replay-events.c | 4 ++-- replay/replay-internal.c | 10 +++++----- replay/replay-internal.h | 10 +++++----- replay/replay-snapshot.c | 6 +++--- replay/replay-time.c | 2 +- replay/replay.c | 26 +++++++++++++------------- 10 files changed, 47 insertions(+), 46 deletions(-)
blockdev.c +1 -1
@@ -1453,7 +1453,7 @@ static void internal_snapshot_prepare(BlkActionState *common, sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL );if (replay_mode !=REPLAY_MODE_NONE ) { - sn->icount =replay_get_current_step (); + sn->icount =replay_get_current_icount (); }else { sn->icount =-1ULL ; }
include/sysemu/replay.h +1 -1
@@ -96,7 +96,7 @@ void replay_breakpoint(void);/* Processing the instructions */ /*! Returns number of executed instructions. */ -uint64_t replay_get_current_step (void ); +uint64_t replay_get_current_icount (void );/*! Returns number of instructions to execute in replay mode. */ int replay_get_instructions (void );/*! Updates instructions counter in replay mode. */
migration/savevm.c +1 -1
@@ -2511,7 +2511,7 @@ int save_snapshot(const char *name, Error **errp) sn->date_nsec = tv.tv_usec *1000 ; sn->vm_clock_nsec =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL );if (replay_mode !=REPLAY_MODE_NONE ) { - sn->icount =replay_get_current_step (); + sn->icount =replay_get_current_icount (); }else { sn->icount =-1ULL ; }
replay/replay-debugging.c +15 -14
@@ -38,7 +38,7 @@ void hmp_info_replay(Monitor *mon, const QDict *qdict)monitor_printf (mon,"%s execution '%s': instruction count = %" PRId64"\n" , replay_mode ==REPLAY_MODE_RECORD ?"Recording" :"Replaying" , -replay_get_filename (),replay_get_current_step ()); +replay_get_filename (),replay_get_current_icount ()); } }
@@ -51,7 +51,7 @@ ReplayInfo *qmp_query_replay(Error **errp) retval->filename =g_strdup (replay_get_filename ()); retval->has_filename = true; } - retval->icount =replay_get_current_step (); + retval->icount =replay_get_current_icount ();return retval; }
@@ -59,7 +59,7 @@ static void replay_break(uint64_t icount, QEMUTimerCB callback, void *opaque) {assert (replay_mode ==REPLAY_MODE_PLAY );assert (replay_mutex_locked ()); -assert (replay_break_icount >=replay_get_current_step ()); +assert (replay_break_icount >=replay_get_current_icount ());assert (callback); replay_break_icount = icount;
@@ -94,7 +94,7 @@ static void replay_stop_vm(void *opaque)void qmp_replay_break (int64_t icount,Error **errp) {if (replay_mode ==REPLAY_MODE_PLAY ) { -if (icount >=replay_get_current_step ()) { +if (icount >=replay_get_current_icount ()) {replay_break (icount, replay_stop_vm,NULL ); }else { error_setg(errp,
@@ -196,14 +196,14 @@ static void replay_seek(int64_t icount, QEMUTimerCB callback, Error **errp) snapshot =replay_find_nearest_snapshot (icount, &snapshot_icount);if (snapshot) { -if (icount <replay_get_current_step () - ||replay_get_current_step () < snapshot_icount) { +if (icount <replay_get_current_icount () + ||replay_get_current_icount () < snapshot_icount) {vm_stop (RUN_STATE_RESTORE_VM );load_snapshot (snapshot, errp); }g_free (snapshot); } -if (replay_get_current_step () <= icount) { +if (replay_get_current_icount () <= icount) {replay_break (icount, callback,NULL );vm_start (); }else {
@@ -242,8 +242,8 @@ bool replay_reverse_step(void)assert (replay_mode ==REPLAY_MODE_PLAY ); -if (replay_get_current_step () !=0 ) { -replay_seek (replay_get_current_step () -1 , replay_stop_vm_debug, &err); +if (replay_get_current_icount () !=0 ) { +replay_seek (replay_get_current_icount () -1 , replay_stop_vm_debug, &err);if (err) {error_free (err);return false;
@@ -283,7 +283,7 @@ static void replay_continue_stop(void *opaque)error_free (err);replay_continue_end (); } - replay_last_snapshot =replay_get_current_step (); + replay_last_snapshot =replay_get_current_icount ();return ; }else {/* Seek to the very first step */
@@ -303,15 +303,16 @@ bool replay_reverse_continue(void)assert (replay_mode ==REPLAY_MODE_PLAY ); -if (replay_get_current_step () !=0 ) { -replay_seek (replay_get_current_step () -1 , replay_continue_stop, &err); +if (replay_get_current_icount () !=0 ) { +replay_seek (replay_get_current_icount () -1 , + replay_continue_stop, &err);if (err) {error_free (err);return false; } replay_last_breakpoint =-1LL ; replay_is_debugging = true; - replay_last_snapshot =replay_get_current_step (); + replay_last_snapshot =replay_get_current_icount ();return true; }
@@ -321,5 +322,5 @@ bool replay_reverse_continue(void)void replay_breakpoint (void ) {assert (replay_mode ==REPLAY_MODE_PLAY ); - replay_last_breakpoint =replay_get_current_step (); + replay_last_breakpoint =replay_get_current_icount (); }
replay/replay-events.c +2 -2
@@ -128,7 +128,7 @@ void replay_add_event(ReplayAsyncEventKind event_kind,void replay_bh_schedule_event (QEMUBH *bh) {if (events_enabled) { -uint64_t id =replay_get_current_step (); +uint64_t id =replay_get_current_icount ();replay_add_event (REPLAY_ASYNC_EVENT_BH , bh,NULL , id); }else {qemu_bh_schedule (bh);
@@ -139,7 +139,7 @@ void replay_bh_schedule_oneshot_event(AioContext *ctx, QEMUBHFunc *cb, void *opaque) {if (events_enabled) { -uint64_t id =replay_get_current_step (); +uint64_t id =replay_get_current_icount ();replay_add_event (REPLAY_ASYNC_EVENT_BH_ONESHOT , cb, opaque, id); }else {aio_bh_schedule_oneshot (ctx, cb, opaque);
replay/replay-internal.c +5 -5
@@ -173,7 +173,7 @@ void replay_fetch_data_kind(void)if (!replay_state.has_unread_data) { replay_state.data_kind =replay_get_byte ();if (replay_state.data_kind ==EVENT_INSTRUCTION ) { - replay_state.instructions_count =replay_get_dword (); + replay_state.instruction_count =replay_get_dword (); }replay_check_error (); replay_state.has_unread_data =1 ;
@@ -227,9 +227,9 @@ void replay_mutex_unlock(void) } } -void replay_advance_current_step (uint64_t current_step) +void replay_advance_current_icount (uint64_t current_icount) { -int diff = (int )(current_step - replay_state.current_step); +int diff = (int )(current_icount - replay_state.current_icount);/* Time can only go forward */ assert (diff >=0 );
@@ -237,7 +237,7 @@ void replay_advance_current_step(uint64_t current_step)if (diff >0 ) {replay_put_event (EVENT_INSTRUCTION );replay_put_dword (diff); - replay_state.current_step += diff; + replay_state.current_icount += diff; } }
@@ -246,6 +246,6 @@ void replay_save_instructions(void) {if (replay_file && replay_mode ==REPLAY_MODE_RECORD ) {g_assert (replay_mutex_locked ()); -replay_advance_current_step (replay_get_current_step ()); +replay_advance_current_icount (replay_get_current_icount ()); } }
replay/replay-internal.h +5 -5
@@ -65,10 +65,10 @@ typedef enum ReplayAsyncEventKind ReplayAsyncEventKind; typedef struct ReplayState { /*! Cached clock values. */ int64_t cached_clock[REPLAY_CLOCK_COUNT]; - /*! Current step - number of processed instructions and timer events. */ - uint64_t current_step; + /*! Current icount - number of processed instructions. */ + uint64_t current_icount; /*! Number of instructions to be executed before other events happen. */ - int instructions_count; + int instruction_count; /*! Type of the currently executed event. */ unsigned int data_kind; /*! Flag which indicates that event is not processed yet. */
@@ -127,8 +127,8 @@ void replay_finish_event(void);data_kind variable. */ void replay_fetch_data_kind (void ); -/*! Advance replay_state.current_step to the specified value. */ -void replay_advance_current_step (uint64_t current_step); +/*! Advance replay_state.current_icount to the specified value. */ +void replay_advance_current_icount (uint64_t current_icount);/*! Saves queued events (like instructions and sound). */ void replay_save_instructions (void );
replay/replay-snapshot.c +3 -3
@@ -42,7 +42,7 @@ static int replay_post_load(void *opaque, int version_id) }else if (replay_mode ==REPLAY_MODE_RECORD ) {/* This is only useful for loading the initial state. Therefore reset all the counters. */ - state->instructions_count =0 ; + state->instruction_count =0 ; state->block_request_id =0 ; }
@@ -57,8 +57,8 @@ static const VMStateDescription vmstate_replay = { .post_load = replay_post_load, .fields = (VMStateField []) {VMSTATE_INT64_ARRAY (cached_clock, ReplayState,REPLAY_CLOCK_COUNT ), -VMSTATE_UINT64 (current_step, ReplayState), -VMSTATE_INT32 (instructions_count, ReplayState), +VMSTATE_UINT64 (current_icount, ReplayState), +VMSTATE_INT32 (instruction_count, ReplayState),VMSTATE_UINT32 (data_kind, ReplayState),VMSTATE_UINT32 (has_unread_data, ReplayState),VMSTATE_UINT64 (file_offset, ReplayState),
replay/replay-time.c +1 -1
@@ -25,7 +25,7 @@ int64_t replay_save_clock(ReplayClockKind kind, int64_t clock,* Due to the caller's locking requirements we get the icount from it * instead of using replay_save_instructions(). */ -replay_advance_current_step (raw_icount); +replay_advance_current_icount (raw_icount);replay_put_event (EVENT_CLOCK + kind);replay_put_qword (clock);
replay/replay.c +13 -13
@@ -43,7 +43,7 @@ bool replay_next_event_is(int event)bool res = false;/* nothing to skip - not all instructions used */ -if (replay_state.instructions_count !=0 ) { +if (replay_state.instruction_count !=0 ) {assert (replay_state.data_kind ==EVENT_INSTRUCTION );return event ==EVENT_INSTRUCTION ; }
@@ -66,7 +66,7 @@ bool replay_next_event_is(int event)return res; } -uint64_t replay_get_current_step (void ) +uint64_t replay_get_current_icount (void ) {return cpu_get_icount_raw (); }
@@ -76,9 +76,9 @@ int replay_get_instructions(void)int res =0 ;replay_mutex_lock ();if (replay_next_event_is (EVENT_INSTRUCTION )) { - res = replay_state.instructions_count; + res = replay_state.instruction_count;if (replay_break_icount !=-1LL ) { -uint64_t current =replay_get_current_step (); +uint64_t current =replay_get_current_icount ();assert (replay_break_icount >= current);if (current + res > replay_break_icount) { res = replay_break_icount - current;
@@ -93,16 +93,16 @@ void replay_account_executed_instructions(void) {if (replay_mode ==REPLAY_MODE_PLAY ) {g_assert (replay_mutex_locked ()); -if (replay_state.instructions_count >0 ) { -int count = (int )(replay_get_current_step () - - replay_state.current_step); +if (replay_state.instruction_count >0 ) { +int count = (int )(replay_get_current_icount () + - replay_state.current_icount);/* Time can only go forward */ assert (count >=0 ); - replay_state.instructions_count -= count; - replay_state.current_step += count; -if (replay_state.instructions_count ==0 ) { + replay_state.instruction_count -= count; + replay_state.current_icount += count; +if (replay_state.instruction_count ==0 ) {assert (replay_state.data_kind ==EVENT_INSTRUCTION );replay_finish_event ();/* Wake up iothread. This is required because
@@ -111,7 +111,7 @@ void replay_account_executed_instructions(void)qemu_notify_event (); }/* Execution reached the break step */ -if (replay_break_icount == replay_state.current_step) { +if (replay_break_icount == replay_state.current_icount) {/* Cannot make callback directly from the vCPU thread */ timer_mod_ns (replay_break_timer,qemu_clock_get_ns (QEMU_CLOCK_REALTIME ));
@@ -290,8 +290,8 @@ static void replay_enable(const char *fname, int mode)replay_mutex_init (); replay_state.data_kind =-1 ; - replay_state.instructions_count =0 ; - replay_state.current_step =0 ; + replay_state.instruction_count =0 ; + replay_state.current_icount =0 ; replay_state.has_unread_data =0 ;/* skip file header for RECORD and check it for PLAY */
Patchew URL: https://patchew.org/QEMU/20190131131520.23264.75724.stgit@pasha-VirtualBox/
Patchew URL: https://patchew.org/QEMU/20190131131520.23264.75724.stgit@pasha-VirtualBox/
Hi,
This series seems to have some coding style problems. See output below for more information:
Subject: [Qemu-devel] [PATCH v11 00/25] Fixing record/replay and adding reverse debugging
Type: series
Message-id: 20190131131520.23264.75724.stgit@pasha-VirtualBox
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'f8b44808ef icount: clean up cpu_can_io before jumping to the next block 2f7d94b010 replay: rename step-related variables and functions e2b261fd4d replay: fix replay shutdown0a08430306 util/qemu-timer: refactor deadline calculation for external timers d0c6fd8ab0 replay: document development rules21f1709992 replay: init rtc after enabling the replay38aac65d87 replay: add BH oneshot event for block layer 087fc5561f replay: describe reverse debugging in docs/replay.txt 3faa39c207 gdbstub: add reverse continue support in replay mode 1eca2bd3d1 gdbstub: add reverse step support in replay mode b6c6ec26cc replay: flush rr queue before loading the vmstate b8a448d7a7 replay: refine replay-time module46c7820268 replay: implement replay-seek command982e0daa35 replay: introduce breakpoint at the specified step 4b895e908d replay: introduce info hmp/qmp command16ea16ff4b qapi: introduce replay.json for record/replay-related stuff b068dc8c88 replay: provide an accessor for rr filenamebb8c95481b migration: introduce icount field for snapshots e81b4b6159 qcow2: introduce icount field for snapshots99b5866912 replay: finish record/replay before closing the disks 3c8bd51b59 replay: don't drain/flush bdrv queue while RR is working 5add07fb21 replay: update docs for record/replay with block devices 36a8e79ba0 replay: disable default snapshot for record/replay 7d3a545b7f block: implement bdrv_snapshot_goto for blkreplay e07e052488 replay: add missing fix for internal function
=== OUTPUT BEGIN ===
1/25 Checking commit e07e052488e5 (replay: add missing fix for internal function) 2/25 Checking commit 7d3a545b7f20 (block: implement bdrv_snapshot_goto for blkreplay) 3/25 Checking commit 36a8e79ba016 (replay: disable default snapshot for record/replay) 4/25 Checking commit 5add07fb219c (replay: update docs for record/replay with block devices) 5/25 Checking commit 3c8bd51b5959 (replay: don't drain/flush bdrv queue while RR is working) 6/25 Checking commit 99b5866912b2 (replay: finish record/replay before closing the disks) 7/25 Checking commit e81b4b615955 (qcow2: introduce icount field for snapshots) 8/25 Checking commit bb8c95481bee (migration: introduce icount field for snapshots) 9/25 Checking commit b068dc8c88a2 (replay: provide an accessor for rr filename) 10/25 Checking commit 16ea16ff4b6f (qapi: introduce replay.json for record/replay-related stuff)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#97:
new file mode 100644
total: 0 errors, 1 warnings, 78 lines checked
Patch 10/25 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
11/25 Checking commit 4b895e908ded (replay: introduce info hmp/qmp command)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #142:
new file mode 100644
total: 0 errors, 1 warnings, 127 lines checked
Patch 11/25 has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
12/25 Checking commit 982e0daa3522 (replay: introduce breakpoint at the specified step) 13/25 Checking commit 46c7820268e5 (replay: implement replay-seek command)
ERROR: "foo* bar" should be "foo *bar"
#118: FILE: replay/replay-debugging.c:134:
+ int64_t* snapshot_icount)
total: 1 errors, 0 warnings, 155 lines checked
Patch 13/25 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
14/25 Checking commit b8a448d7a70f (replay: refine replay-time module) 15/25 Checking commit b6c6ec26cca5 (replay: flush rr queue before loading the vmstate) 16/25 Checking commit 1eca2bd3d1e3 (gdbstub: add reverse step support in replay mode) 17/25 Checking commit 3faa39c2076b (gdbstub: add reverse continue support in replay mode) 18/25 Checking commit 087fc5561f86 (replay: describe reverse debugging in docs/replay.txt) 19/25 Checking commit 38aac65d879d (replay: add BH oneshot event for block layer)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #316:
new file mode 100644
total: 0 errors, 1 warnings, 224 lines checked
Patch 19/25 has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
20/25 Checking commit 21f1709992d5 (replay: init rtc after enabling the replay) 21/25 Checking commit d0c6fd8ab088 (replay: document development rules)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #18:
new file mode 100644
total: 0 errors, 1 warnings, 46 lines checked
Patch 21/25 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
22/25 Checking commit 0a0843030670 (util/qemu-timer: refactor deadline calculation for external timers) 23/25 Checking commit e2b261fd4da3 (replay: fix replay shutdown)
24/25 Checking commit 2f7d94b010c1 (replay: rename step-related variables and functions)
WARNING: line over 80 characters
#117: FILE: replay/replay-debugging.c:246:
+ replay_seek(replay_get_current_icount() - 1, replay_stop_vm_debug, &err);
total: 0 errors, 1 warnings, 282 lines checked
Patch 24/25 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
25/25 Checking commit f8b44808eff1 (icount: clean up cpu_can_io before jumping to the next block) === OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20190131131520.23264.75724.stgit@pasha-VirtualBox/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]