Skip to contentSkip to conversation

ARM: dts: add description of Netgear RN NV+v2 LCD

PATCH In review David Coles 2 participants 3 messages Feb 8, 2019 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: add description of Netgear RN NV+v2 LCD

GPIO pin mapping taken from NetGear NV+ v2 5.3.13 kernel sources[1] (see arch/arm/plat-feroceon/mv_hal/rtc/ext_rtc/usiLCD.c).

1. https://www.downloads.netgear.com/files/GPL/RND_5.3.13_WW.src.zip

---
 .../boot/dts/kirkwood-netgear_readynas_nv+_v2.dts  | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +14 -0
index 8cc8550242ef..a61b56f44ec7 100644
@@ -184,6 +184,20 @@
 		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 	};
 
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 3 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
Signature · 1 line
2.17.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 2 lines · David Coles

GPIO pin mapping taken from NetGear NV+ v2 5.3.13 kernel sources[1] (see arch/arm/plat-feroceon/mv_hal/rtc/ext_rtc/usiLCD.c).

Kirkwood! It has been a while since we had a kirkwood patch. Some NAS boxes seem to never die. Nice to see somebody still hacking on them.

Quoted 1 line

Andrew

#2 lore raw
Quoted 2 lines · Andrew Lunn

Kirkwood! It has been a while since we had a kirkwood patch. Some NAS boxes seem to never die. Nice to see somebody still hacking on them.

Netgear firmware only supported SMBv1, Windows 10 does not. Luckily Arnaud Ebalard had done most of the heavy lifting years ago. Getting the LCD working with the new HD44780 driver was icing on the cake.

Thanks,
David