Skip to contentSkip to conversation

s390x: SIGP + IRQ preparations for TCG vector register support

PATCH Applied David Hildenbrand 4 participants 13 messages Feb 22, 2019 – Feb 25, 2019

lore
Share & tools
lore
#0 lore raw

cover s390x: SIGP + IRQ preparations for TCG vector register support

These are minor preparations for vector instruction support for TCG, also touching KVM code.

During SIGP STORE ADDITIONAL STATUS we have to properly convert the endianess. On machine checks, we have to also store the vector registers into the extended save area.

Both changes are not used by TCG code before we implement + enable vector instructions. KVM code shares the SIGP STORE ADDITIONAL STATUS implementation.

Note: Vector registers (128 bit) are modeled as two 64 bit values. Low and high 64 bit values correspond on big/little systems, however the values themself need conversion. Documentation for that will be added along with the actual vector instruction support.

David Hildenbrand (3):
s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS
s390x: use a QEMU-style typedef + name for SIGP save area struct s390x/tcg: Save vregs to extended mchk save area

 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/helper.c      | 39 ++++++++++++++++++++------------
 target/s390x/internal.h    |  4 +++-
 3 files changed, 72 insertions(+), 17 deletions(-)
Signature · 1 line
2.17.2
#1 lore raw

PATCH 1/3 s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS

As we will support vector instructions soon, and vector registers are stored in 64bit host chunks, let's use cpu_to_be64. Same applies to the guarded storage control block.

---
 target/s390x/helper.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)
target/s390x/helper.c +21 -10
index 3d74836a83..f3fcf96482 100644
@@ -272,32 +272,43 @@ int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
     return 0;
 }
 
-#define ADTL_GS_OFFSET   1024 /* offset of GS data in adtl save area */
+typedef struct SigpAdtlSaveArea {
+    uint64_t    vregs[32][2];                     /* 0x0000 */
+    uint8_t     pad_0x0200[0x0400 - 0x0200];      /* 0x0200 */
+    uint64_t    gscb[4];                          /* 0x0400 */
+    uint8_t     pad_0x0420[0x1000 - 0x0420];      /* 0x0420 */
+} SigpAdtlSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(SigpAdtlSaveArea) != 4096);
+
 #define ADTL_GS_MIN_SIZE 2048 /* minimal size of adtl save area for GS */
 int s390_store_adtl_status(S390CPU *cpu, hwaddr addr, hwaddr len)
 {
+    SigpAdtlSaveArea *sa;
     hwaddr save = len;
-    void *mem;
+    int i;
 
-    mem = cpu_physical_memory_map(addr, &save, 1);
-    if (!mem) {
+    sa = cpu_physical_memory_map(addr, &save, 1);
+    if (!sa) {
         return -EFAULT;
     }
     if (save != len) {
-        cpu_physical_memory_unmap(mem, len, 1, 0);
+        cpu_physical_memory_unmap(sa, len, 1, 0);
         return -EFAULT;
     }
 
-    /* FIXME: as soon as TCG supports these features, convert cpu->be */
     if (s390_has_feat(S390_FEAT_VECTOR)) {
-        memcpy(mem, &cpu->env.vregs, 512);
+        for (i = 0; i < 32; i++) {
+            sa->vregs[i][0] = cpu_to_be64(cpu->env.vregs[i][0].ll);
+            sa->vregs[i][1] = cpu_to_be64(cpu->env.vregs[i][1].ll);
+        }
     }
     if (s390_has_feat(S390_FEAT_GUARDED_STORAGE) && len >= ADTL_GS_MIN_SIZE) {
-        memcpy(mem + ADTL_GS_OFFSET, &cpu->env.gscb, 32);
+        for (i = 0; i < 4; i++) {
+            sa->gscb[i] = cpu_to_be64(cpu->env.gscb[i]);
+        }
     }
 
-    cpu_physical_memory_unmap(mem, len, 1, len);
-
+    cpu_physical_memory_unmap(sa, len, 1, len);
     return 0;
 }
 #endif /* CONFIG_USER_ONLY */
Signature · 1 line
2.17.2
#4 lore raw

PATCH 2/3 s390x: use a QEMU-style typedef + name for SIGP save area struct

In reply to David Hildenbrand

Convert this to QEMU style.

---
 target/s390x/helper.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
target/s390x/helper.c +4 -4
index f3fcf96482..a7edd5df7d 100644
@@ -211,7 +211,7 @@ void s390_cpu_recompute_watchpoints(CPUState *cs)
     }
 }
 
-struct sigp_save_area {
+typedef struct SigpSaveArea {
     uint64_t    fprs[16];                       /* 0x0000 */
     uint64_t    grs[16];                        /* 0x0080 */
     PSW         psw;                            /* 0x0100 */
@@ -225,13 +225,13 @@ struct sigp_save_area {
     uint8_t     pad_0x0138[0x0140 - 0x0138];    /* 0x0138 */
     uint32_t    ars[16];                        /* 0x0140 */
     uint64_t    crs[16];                        /* 0x0384 */
-};
-QEMU_BUILD_BUG_ON(sizeof(struct sigp_save_area) != 512);
+} SigpSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(SigpSaveArea) != 512);
 
 int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
 {
     static const uint8_t ar_id = 1;
-    struct sigp_save_area *sa;
+    SigpSaveArea *sa;
     hwaddr len = sizeof(*sa);
     int i;
 
Signature · 1 line
2.17.2
#7 lore raw

PATCH 3/3 s390x/tcg: Save vregs to extended mchk save area

In reply to David Hildenbrand

If we have vector registers and the designation is not zero, we have to try to write the vector registers. If the designation is zero or if storing fails, we must not indicate validity. s390_build_validity_mcic() automatically already sets validity if the vector instruction facility is installed.

As long as we don't support the guarded-storage facility, the alignemnt & size of the area is always 1024 bytes.

---
 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/internal.h    |  4 +++-
 2 files changed, 47 insertions(+), 3 deletions(-)
target/s390x/excp_helper.c +44 -2
index a758649f47..f84bfb1284 100644
@@ -347,10 +347,41 @@ static void do_io_interrupt(CPUS390XState *env)
     load_psw(env, mask, addr);
 }
 
+typedef struct MchkExtSaveArea {
+    uint64_t    vregs[32][2];                     /* 0x0000 */
+    uint8_t     pad_0x0200[0x0400 - 0x0200];      /* 0x0200 */
+} MchkExtSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(MchkExtSaveArea) != 1024);
+
+static int mchk_store_vregs(CPUS390XState *env, uint64_t mcesao)
+{
+    hwaddr len = sizeof(MchkExtSaveArea);
+    MchkExtSaveArea *sa;
+    int i;
+
+    sa = cpu_physical_memory_map(mcesao, &len, 1);
+    if (!sa) {
+        return -EFAULT;
+    }
+    if (len != sizeof(MchkExtSaveArea)) {
+        cpu_physical_memory_unmap(sa, len, 1, 0);
+        return -EFAULT;
+    }
+
+    for (i = 0; i < 32; i++) {
+        sa->vregs[i][0] = cpu_to_be64(env->vregs[i][0].ll);
+        sa->vregs[i][1] = cpu_to_be64(env->vregs[i][1].ll);
+    }
+
+    cpu_physical_memory_unmap(sa, len, 1, len);
+    return 0;
+}
+
 static void do_mchk_interrupt(CPUS390XState *env)
 {
     QEMUS390FLICState *flic = QEMU_S390_FLIC(s390_get_flic());
-    uint64_t mask, addr;
+    uint64_t mcic = s390_build_validity_mcic() | MCIC_SC_CP;
+    uint64_t mask, addr, mcesao = 0;
     LowCore *lowcore;
     int i;
 
@@ -362,6 +393,17 @@ static void do_mchk_interrupt(CPUS390XState *env)
 
     lowcore = cpu_map_lowcore(env);
 
+    /* extended save area */
+    if (mcic & MCIC_VB_VR) {
+        /* length and alignment is 1024 bytes */
+        mcesao = be64_to_cpu(lowcore->mcesad) & ~0x3ffull;
+    }
+
+    /* try to store vector registers */
+    if (!mcesao || mchk_store_vregs(env, mcesao)) {
+        mcic &= ~MCIC_VB_VR;
+    }
+
     /* we are always in z/Architecture mode */
     lowcore->ar_access_id = 1;
 
@@ -377,7 +419,7 @@ static void do_mchk_interrupt(CPUS390XState *env)
     lowcore->cpu_timer_save_area = cpu_to_be64(env->cputm);
     lowcore->clock_comp_save_area = cpu_to_be64(env->ckc >> 8);
 
-    lowcore->mcic = cpu_to_be64(s390_build_validity_mcic() | MCIC_SC_CP);
+    lowcore->mcic = cpu_to_be64(mcic);
     lowcore->mcck_old_psw.mask = cpu_to_be64(get_psw_mask(env));
     lowcore->mcck_old_psw.addr = cpu_to_be64(env->psw.addr);
     mask = be64_to_cpu(lowcore->mcck_new_psw.mask);
target/s390x/internal.h +3 -1
index 122fe037bc..cbeef3515b 100644
@@ -101,7 +101,9 @@ typedef struct LowCore {
     /* whether the kernel died with panic() or not */
     uint32_t        panic_magic;              /* 0xe00 */
 
-    uint8_t         pad13[0x11b8 - 0xe04];    /* 0xe04 */
+    uint8_t         pad13[0x11b0 - 0xe04];    /* 0xe04 */
+
+    uint64_t        mcesad;                    /* 0x11B0 */
 
     /* 64 bit extparam used for pfault, diag 250 etc  */
     uint64_t        ext_params2;               /* 0x11B8 */
Signature · 1 line
2.17.2
Reviewed-by on v1 2/3
#5 lore raw

Re: [Qemu-devel] [PATCH v1 2/3] s390x: use a QEMU-style typedef + name for SIGP save area struct

In reply to David Hildenbrand
Quoted 26 lines · David Hildenbrand

Convert this to QEMU style.

---
 target/s390x/helper.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
target/s390x/helper.c +1 -3
index f3fcf96482..a7edd5df7d 100644
@@ -211,7 +211,7 @@ void s390_cpu_recompute_watchpoints(CPUState *cs)
     }
 }
 
-struct sigp_save_area {
+typedef struct SigpSaveArea {
     uint64_t    fprs[16];                       /* 0x0000 */
     uint64_t    grs[16];                        /* 0x0080 */
     PSW         psw;                            /* 0x0100 */
@@ -225,13 +225,13 @@ struct sigp_save_area {
     uint8_t     pad_0x0138[0x0140 - 0x0138];    /* 0x0138 */
     uint32_t    ars[16];                        /* 0x0140 */
     uint64_t    crs[16];                        /* 0x0384 */
-};
-QEMU_BUILD_BUG_ON(sizeof(struct sigp_save_area) != 512);

target/s390x/helper.c struct sigp_save_area { · line 236

Quoted 10 lines
target/s390x/helper.c +3 -1
+} SigpSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(SigpSaveArea) != 512);
 
 int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
 {
     static const uint8_t ar_id = 1;
-    struct sigp_save_area *sa;
+    SigpSaveArea *sa;
     hwaddr len = sizeof(*sa);
     int i;
Reviewed-by on v1 1/3
#2 lore raw

Re: [Qemu-devel] [PATCH v1 1/3] s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS

In reply to David Hildenbrand
Quoted 58 lines · David Hildenbrand

As we will support vector instructions soon, and vector registers are stored in 64bit host chunks, let's use cpu_to_be64. Same applies to the guarded storage control block.

---
 target/s390x/helper.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)
target/s390x/helper.c +18 -8
index 3d74836a83..f3fcf96482 100644
@@ -272,32 +272,43 @@ int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
     return 0;
 }
 
-#define ADTL_GS_OFFSET   1024 /* offset of GS data in adtl save area */
+typedef struct SigpAdtlSaveArea {
+    uint64_t    vregs[32][2];                     /* 0x0000 */
+    uint8_t     pad_0x0200[0x0400 - 0x0200];      /* 0x0200 */
+    uint64_t    gscb[4];                          /* 0x0400 */
+    uint8_t     pad_0x0420[0x1000 - 0x0420];      /* 0x0420 */
+} SigpAdtlSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(SigpAdtlSaveArea) != 4096);
+
 #define ADTL_GS_MIN_SIZE 2048 /* minimal size of adtl save area for GS */
 int s390_store_adtl_status(S390CPU *cpu, hwaddr addr, hwaddr len)
 {
+    SigpAdtlSaveArea *sa;
     hwaddr save = len;
-    void *mem;
+    int i;
 
-    mem = cpu_physical_memory_map(addr, &save, 1);
-    if (!mem) {
+    sa = cpu_physical_memory_map(addr, &save, 1);
+    if (!sa) {
         return -EFAULT;
     }
     if (save != len) {
-        cpu_physical_memory_unmap(mem, len, 1, 0);
+        cpu_physical_memory_unmap(sa, len, 1, 0);
         return -EFAULT;
     }
 
-    /* FIXME: as soon as TCG supports these features, convert cpu->be */
     if (s390_has_feat(S390_FEAT_VECTOR)) {
-        memcpy(mem, &cpu->env.vregs, 512);
+        for (i = 0; i < 32; i++) {
+            sa->vregs[i][0] = cpu_to_be64(cpu->env.vregs[i][0].ll);
+            sa->vregs[i][1] = cpu_to_be64(cpu->env.vregs[i][1].ll);
+        }
     }
     if (s390_has_feat(S390_FEAT_GUARDED_STORAGE) && len >= ADTL_GS_MIN_SIZE) {
-        memcpy(mem + ADTL_GS_OFFSET, &cpu->env.gscb, 32);
+        for (i = 0; i < 4; i++) {

target/s390x/helper.c int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch) · line 314

Quoted 10 lines
target/s390x/helper.c +3 -2
+            sa->gscb[i] = cpu_to_be64(cpu->env.gscb[i]);
+        }
     }
 
-    cpu_physical_memory_unmap(mem, len, 1, len);
-
+    cpu_physical_memory_unmap(sa, len, 1, len);
     return 0;
 }
 #endif /* CONFIG_USER_ONLY */

Looks sane to me.

Reviewed-by on v1 3/3
#8 lore raw

Re: [Qemu-devel] [PATCH v1 3/3] s390x/tcg: Save vregs to extended mchk save area

In reply to David Hildenbrand
Quoted 6 lines · David Hildenbrand

If we have vector registers and the designation is not zero, we have to try to write the vector registers. If the designation is zero or if storing fails, we must not indicate validity. s390_build_validity_mcic() automatically already sets validity if the vector instruction facility is installed.

Quoted 8 lines

As long as we don't support the guarded-storage facility, the alignemnt & size of the area is always 1024 bytes.

---
 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/internal.h    |  4 +++-
 2 files changed, 47 insertions(+), 3 deletions(-)

Looks also sane to me.

#10 lore raw
In reply to David Hildenbrand
Quoted 21 lines · On Fri, 22 Feb 2019 09:11:50 +0100 David Hildenbrand <[email protected]> wrote:

These are minor preparations for vector instruction support for TCG, also touching KVM code.

During SIGP STORE ADDITIONAL STATUS we have to properly convert the endianess. On machine checks, we have to also store the vector registers into the extended save area.

Both changes are not used by TCG code before we implement + enable vector instructions. KVM code shares the SIGP STORE ADDITIONAL STATUS implementation.

Note: Vector registers (128 bit) are modeled as two 64 bit values. Low and high 64 bit values correspond on big/little systems, however the values themself need conversion. Documentation for that will be added along with the actual vector instruction support.

David Hildenbrand (3):
s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS
s390x: use a QEMU-style typedef + name for SIGP save area struct s390x/tcg: Save vregs to extended mchk save area

Quoted 5 lines
 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/helper.c      | 39 ++++++++++++++++++++------------
 target/s390x/internal.h    |  4 +++-
 3 files changed, 72 insertions(+), 17 deletions(-)

Quick question: Unlike your floating-point patch series, this does not depend on anything not going through the s390x tree, right?

#9 lore raw

Re: [Qemu-devel] [PATCH v1 3/3] s390x/tcg: Save vregs to extended mchk save area

In reply to David Hildenbrand
Quoted 8 lines · On Fri, 22 Feb 2019 09:11:53 +0100 David Hildenbrand <[email protected]> wrote:

If we have vector registers and the designation is not zero, we have to try to write the vector registers. If the designation is zero or if storing fails, we must not indicate validity. s390_build_validity_mcic() automatically already sets validity if the vector instruction facility is installed.

As long as we don't support the guarded-storage facility, the alignemnt & size of the area is always 1024 bytes.

s/alignemnt & size/alignment and size/

Can change while applying.

Quoted 6 lines
---
 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/internal.h    |  4 +++-
 2 files changed, 47 insertions(+), 3 deletions(-)
#11 lore raw
In reply to Cornelia Huck
Quoted 24 lines · Cornelia Huck
Quoted 21 lines · On Fri, 22 Feb 2019 09:11:50 +0100 David Hildenbrand <[email protected]> wrote:

These are minor preparations for vector instruction support for TCG, also touching KVM code.

During SIGP STORE ADDITIONAL STATUS we have to properly convert the endianess. On machine checks, we have to also store the vector registers into the extended save area.

Both changes are not used by TCG code before we implement + enable vector instructions. KVM code shares the SIGP STORE ADDITIONAL STATUS implementation.

Note: Vector registers (128 bit) are modeled as two 64 bit values. Low and high 64 bit values correspond on big/little systems, however the values themself need conversion. Documentation for that will be added along with the actual vector instruction support.

David Hildenbrand (3):
s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS
s390x: use a QEMU-style typedef + name for SIGP save area struct s390x/tcg: Save vregs to extended mchk save area

Quoted 9 lines
Quoted 5 lines
 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/helper.c      | 39 ++++++++++++++++++++------------
 target/s390x/internal.h    |  4 +++-
 3 files changed, 72 insertions(+), 17 deletions(-)

Quick question: Unlike your floating-point patch series, this does not depend on anything not going through the s390x tree, right?

While these patches are based on the others, they should apply and work just nicely without the floating-point patches.

Signature · 3 lines
Thanks,

David / dhildenb
Reviewed-by on v1 1/3
#3 lore raw

Re: [Qemu-devel] [PATCH v1 1/3] s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS

In reply to David Hildenbrand
Quoted 5 lines · David Hildenbrand

As we will support vector instructions soon, and vector registers are stored in 64bit host chunks, let's use cpu_to_be64. Same applies to the guarded storage control block.

looks sane.

Quoted 63 lines
---
 target/s390x/helper.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)
target/s390x/helper.c +21 -10
index 3d74836a83..f3fcf96482 100644
@@ -272,32 +272,43 @@ int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
     return 0;
 }
 
-#define ADTL_GS_OFFSET   1024 /* offset of GS data in adtl save area */
+typedef struct SigpAdtlSaveArea {
+    uint64_t    vregs[32][2];                     /* 0x0000 */
+    uint8_t     pad_0x0200[0x0400 - 0x0200];      /* 0x0200 */
+    uint64_t    gscb[4];                          /* 0x0400 */
+    uint8_t     pad_0x0420[0x1000 - 0x0420];      /* 0x0420 */
+} SigpAdtlSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(SigpAdtlSaveArea) != 4096);
+
 #define ADTL_GS_MIN_SIZE 2048 /* minimal size of adtl save area for GS */
 int s390_store_adtl_status(S390CPU *cpu, hwaddr addr, hwaddr len)
 {
+    SigpAdtlSaveArea *sa;
     hwaddr save = len;
-    void *mem;
+    int i;
 
-    mem = cpu_physical_memory_map(addr, &save, 1);
-    if (!mem) {
+    sa = cpu_physical_memory_map(addr, &save, 1);
+    if (!sa) {
         return -EFAULT;
     }
     if (save != len) {
-        cpu_physical_memory_unmap(mem, len, 1, 0);
+        cpu_physical_memory_unmap(sa, len, 1, 0);
         return -EFAULT;
     }
 
-    /* FIXME: as soon as TCG supports these features, convert cpu->be */
     if (s390_has_feat(S390_FEAT_VECTOR)) {
-        memcpy(mem, &cpu->env.vregs, 512);
+        for (i = 0; i < 32; i++) {
+            sa->vregs[i][0] = cpu_to_be64(cpu->env.vregs[i][0].ll);
+            sa->vregs[i][1] = cpu_to_be64(cpu->env.vregs[i][1].ll);
+        }
     }
     if (s390_has_feat(S390_FEAT_GUARDED_STORAGE) && len >= ADTL_GS_MIN_SIZE) {
-        memcpy(mem + ADTL_GS_OFFSET, &cpu->env.gscb, 32);
+        for (i = 0; i < 4; i++) {
+            sa->gscb[i] = cpu_to_be64(cpu->env.gscb[i]);
+        }
     }
 
-    cpu_physical_memory_unmap(mem, len, 1, len);
-
+    cpu_physical_memory_unmap(sa, len, 1, len);
     return 0;
 }
 #endif /* CONFIG_USER_ONLY */
Acked-by on v1 2/3
#6 lore raw

Re: [Qemu-devel] [qemu-s390x] [PATCH v1 2/3] s390x: use a QEMU-style typedef + name for SIGP save area struct

In reply to David Hildenbrand
Quoted 3 lines · David Hildenbrand

Convert this to QEMU style.

Quoted 35 lines
---
 target/s390x/helper.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
target/s390x/helper.c +4 -4
index f3fcf96482..a7edd5df7d 100644
@@ -211,7 +211,7 @@ void s390_cpu_recompute_watchpoints(CPUState *cs)
     }
 }
 
-struct sigp_save_area {
+typedef struct SigpSaveArea {
     uint64_t    fprs[16];                       /* 0x0000 */
     uint64_t    grs[16];                        /* 0x0080 */
     PSW         psw;                            /* 0x0100 */
@@ -225,13 +225,13 @@ struct sigp_save_area {
     uint8_t     pad_0x0138[0x0140 - 0x0138];    /* 0x0138 */
     uint32_t    ars[16];                        /* 0x0140 */
     uint64_t    crs[16];                        /* 0x0384 */
-};
-QEMU_BUILD_BUG_ON(sizeof(struct sigp_save_area) != 512);
+} SigpSaveArea;
+QEMU_BUILD_BUG_ON(sizeof(SigpSaveArea) != 512);
 
 int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
 {
     static const uint8_t ar_id = 1;
-    struct sigp_save_area *sa;
+    SigpSaveArea *sa;
     hwaddr len = sizeof(*sa);
     int i;
 
#12 lore raw
In reply to David Hildenbrand
Quoted 21 lines · On Fri, 22 Feb 2019 09:11:50 +0100 David Hildenbrand <[email protected]> wrote:

These are minor preparations for vector instruction support for TCG, also touching KVM code.

During SIGP STORE ADDITIONAL STATUS we have to properly convert the endianess. On machine checks, we have to also store the vector registers into the extended save area.

Both changes are not used by TCG code before we implement + enable vector instructions. KVM code shares the SIGP STORE ADDITIONAL STATUS implementation.

Note: Vector registers (128 bit) are modeled as two 64 bit values. Low and high 64 bit values correspond on big/little systems, however the values themself need conversion. Documentation for that will be added along with the actual vector instruction support.

David Hildenbrand (3):
s390x: Use cpu_to_be64 in SIGP STORE ADDITIONAL STATUS
s390x: use a QEMU-style typedef + name for SIGP save area struct s390x/tcg: Save vregs to extended mchk save area

Quoted 5 lines
 target/s390x/excp_helper.c | 46 ++++++++++++++++++++++++++++++++++++--
 target/s390x/helper.c      | 39 ++++++++++++++++++++------------
 target/s390x/internal.h    |  4 +++-
 3 files changed, 72 insertions(+), 17 deletions(-)

Thanks, applied.