Skip to contentSkip to conversation

net: Fail route add with unsupported nexthop attribute

PATCH In review David Ahern 2 participants 5 messages Feb 26, 2019

Subsystems (3)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/3 ipv4: Return error for RTA_VIA attribute

In reply to David Ahern

From: David Ahern <[email protected]>

IPv4 currently does not support nexthops outside of the AF_INET family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended:

  $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0
  $ ip ro ls
  ...
  172.16.1.0/24 dev eth0

Catch this and fail the route add:

  $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0
  Error: IPv4 does not support RTA_VIA attribute.
Fixes 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
---
 net/ipv4/fib_frontend.c | 4 ++++
 1 file changed, 4 insertions(+)
net/ipv4/fib_frontend.c +4 -0
index fe4f6a624238..ed14ec245584 100644
@@ -710,6 +710,10 @@ static int rtm_to_fib_config(struct net *net, struct sk_buff *skb,
 		case RTA_GATEWAY:
 			cfg->fc_gw = nla_get_be32(attr);
 			break;
+		case RTA_VIA:
+			NL_SET_ERR_MSG(extack, "IPv4 does not support RTA_VIA attribute");
+			err = -EINVAL;
+			goto errout;
 		case RTA_PRIORITY:
 			cfg->fc_priority = nla_get_u32(attr);
 			break;
Signature · 1 line
2.11.0
author maintainer
#2 lore raw

PATCH 2/3 ipv6: Return error for RTA_VIA attribute

In reply to David Ahern

From: David Ahern <[email protected]>

IPv6 currently does not support nexthops outside of the AF_INET6 family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended:

  $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
  $ ip ro ls
  ...
  2001:db8:2::/64 dev eth0 metric 1024 pref medium

Catch this and fail the route add:

  $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
  Error: IPv6 does not support RTA_VIA attribute.
Fixes 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
---
 net/ipv6/route.c | 4 ++++
 1 file changed, 4 insertions(+)
net/ipv6/route.c +4 -0
index ce15dc4ccbfa..b7a620023a52 100644
@@ -4182,6 +4182,10 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh,
 		cfg->fc_gateway = nla_get_in6_addr(tb[RTA_GATEWAY]);
 		cfg->fc_flags |= RTF_GATEWAY;
 	}
+	if (tb[RTA_VIA]) {
+		NL_SET_ERR_MSG(extack, "IPv6 does not support RTA_VIA attribute");
+		goto errout;
+	}
 
 	if (tb[RTA_DST]) {
 		int plen = (rtm->rtm_dst_len + 7) >> 3;
Signature · 1 line
2.11.0
author maintainer
#3 lore raw

PATCH 3/3 mpls: Return error for RTA_GATEWAY attribute

In reply to David Ahern

From: David Ahern <[email protected]>

MPLS does not support nexthops with an MPLS address family. Specifically, it does not handle RTA_GATEWAY attribute. Make it clear by returning an error.

Fixes 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
---
 net/mpls/af_mpls.c | 3 +++
 1 file changed, 3 insertions(+)
net/mpls/af_mpls.c +3 -0
index 7d55d4c04088..fa763e2e50ec 100644
@@ -1838,6 +1838,9 @@ static int rtm_to_route_config(struct sk_buff *skb,
 				goto errout;
 			break;
 		}
+		case RTA_GATEWAY:
+			NL_SET_ERR_MSG(extack, "MPLS does not support RTA_GATEWAY attribute");
+			goto errout;
 		case RTA_VIA:
 		{
 			if (nla_get_via(nla, &cfg->rc_via_alen,
Signature · 1 line
2.11.0

David Ahern

author maintainer
#0 lore raw

cover net: Fail route add with unsupported nexthop attribute

From: David Ahern <[email protected]>

RTA_VIA was added for MPLS as a way of specifying a gateway from a different address family. IPv4 and IPv6 do not currently support RTA_VIA so using it leads to routes that are not what the user intended. Catch and fail - returning a proper error message.

MPLS on the other hand does not support RTA_GATEWAY since it does not make sense to have a nexthop from the MPLS address family. Similarly, catch and fail - returning a proper error message.

David Ahern (3):
ipv4: Return error for RTA_VIA attribute
ipv6: Return error for RTA_VIA attribute
mpls: Return error for RTA_GATEWAY attribute

 net/ipv4/fib_frontend.c | 4 ++++
 net/ipv6/route.c        | 4 ++++
 net/mpls/af_mpls.c      | 3 +++
 3 files changed, 11 insertions(+)
Signature · 1 line
2.11.0
maintainer
#4 lore raw

From: David Ahern <[email protected]>
Date: Tue, 26 Feb 2019 09:00:01 -0800

Quoted 10 lines

From: David Ahern <[email protected]>

RTA_VIA was added for MPLS as a way of specifying a gateway from a different address family. IPv4 and IPv6 do not currently support RTA_VIA so using it leads to routes that are not what the user intended. Catch and fail - returning a proper error message.

MPLS on the other hand does not support RTA_GATEWAY since it does not make sense to have a nexthop from the MPLS address family. Similarly, catch and fail - returning a proper error message.

Series applied and queued up for -stable.