Skip to contentSkip to conversation

imx: add lowlevel init for ARM64

PATCH In review Peng Fan 4 participants 7 messages Apr 15, 2019 – Apr 28, 2019

Subsystems (4)
lore
Share & tools
lore

Peng Fan

author
#0 lore raw

PATCH 1/1 imx: add lowlevel init for ARM64

Sometimes we met SERROR, but only to catch it when Linux boots up. Let's enable catching in U-Boot to catch it ealier and ease debug.

---
 arch/arm/mach-imx/Makefile   |  2 +-
 arch/arm/mach-imx/lowlevel.S | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-imx/lowlevel.S
arch/arm/mach-imx/Makefile +1 -1
index c3ed62aed6..37675d0558 100644
@@ -204,7 +204,7 @@ endif
 
 targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
 
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o
 
 obj-$(CONFIG_MX5) += mx5/
 obj-$(CONFIG_MX6) += mx6/
arch/arm/mach-imx/lowlevel.S new file +22 -0
new file mode 100644
index 0000000000..158fdb7d87
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mrs	x0, CurrentEL
+	cmp	x0, #8
+	b.eq	1f
+	ret
+1:
+	msr daifclr, #4
+
+	/* set HCR_EL2.AMO to catch SERROR */
+	mrs	x0, hcr_el2
+	orr	x0, x0, #0x20
+	msr	hcr_el2, x0
+	isb
+	ret
+ENDPROC(lowlevel_init)
Signature · 1 line
2.16.4
#1 lore raw
Quoted 3 lines

Sometimes we met SERROR, but only to catch it when Linux boots up. Let's enable catching in U-Boot to catch it ealier and ease debug.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#2 lore raw

PATCH 1/1 imx: add lowlevel init for ARM64

In reply to Peng Fan

Hi Peng and Stefano

Unfortunately, this seems to break Ethernet on Colibri iMX8X:

=> dhcp
"Error" handler, esr 0xbf000002
elr: 0000000080049664 lr : 000000008004964c (reloc)
elr: 00000000ffef6664 lr : 00000000ffef664c x0 : 000000005b040288 x1 : 0000000000000001 x2 : 00000000fd6c5ff4 x3 : 0000000000000020 x4 : 00000000fd6c5ff0 x5 : 0000000000000020 x6 : 00000000ffef079c x7 : 00000000fd6f1600 x8 : 0000000000000044 x9 : 0000000000000008
x10: 00000000fd6d1620 x11: 00000000fd6d3a10
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fd6c62cc x15: 0000000000000002
x16: 0000000000002080 x17: 0000000000000000
x18: 00000000fd6cada8 x19: 00000000fd6d1160
x20: 0000000000000200 x21: 000000005b040300
x22: 00000000fd6f1000 x23: 00000000fd6cfdf0
x24: 00000000ffff8000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 00000000fd6d15c0 x29: 00000000fd6c6030

Resetting CPU ...

resetting ...

Reverting commit 5955c6eeb453 ("imx: add lowlevel init for ARM64") makes it work again.

Unfortunately, I don't have a MEK in my home office but will check Ethernet operation there on Monday as well.

Anyway, does anybody know what exactly is going on?

Cheers

Marcel

Quoted 60 lines · Peng Fan

Sometimes we met SERROR, but only to catch it when Linux boots up. Let's enable catching in U-Boot to catch it ealier and ease debug.

---
 arch/arm/mach-imx/Makefile   |  2 +-
 arch/arm/mach-imx/lowlevel.S | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-imx/lowlevel.S
arch/arm/mach-imx/Makefile +1 -1
index c3ed62aed6..37675d0558 100644
@@ -204,7 +204,7 @@ endif
 
 targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-
 dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
 
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o
 
 obj-$(CONFIG_MX5) += mx5/

obj-$(CONFIG_MX6) += mx6/

arch/arm/mach- renamed from arch/arm/mach-imx/lowlevel.S +0 -0

imx/lowlevel.S
new file mode 100644
index 0000000000..158fdb7d87

arch/arm/mach-imx/lowlevel.S new file +22 -0
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mrs	x0, CurrentEL
+	cmp	x0, #8
+	b.eq	1f
+	ret
+1:
+	msr daifclr, #4
+
+	/* set HCR_EL2.AMO to catch SERROR */
+	mrs	x0, hcr_el2
+	orr	x0, x0, #0x20
+	msr	hcr_el2, x0
+	isb
+	ret
+ENDPROC(lowlevel_init)
Signature · 6 lines
2.16.4

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
author
#3 lore raw

PATCH 1/1 imx: add lowlevel init for ARM64

Hi Marcel,

Please apply this patch, Joe has not pick it up.
https://patchwork.ozlabs.org/patch/1085432/

Stefano,

Would you pick it up?

Quoted 30 lines

Subject: [REGRESSION] [PATCH] imx: add lowlevel init for ARM64

Hi Peng and Stefano

Unfortunately, this seems to break Ethernet on Colibri iMX8X:

=> dhcp
"Error" handler, esr 0xbf000002
elr: 0000000080049664 lr : 000000008004964c (reloc)
elr: 00000000ffef6664 lr : 00000000ffef664c x0 : 000000005b040288 x1 : 0000000000000001 x2 : 00000000fd6c5ff4 x3 : 0000000000000020 x4 : 00000000fd6c5ff0 x5 : 0000000000000020 x6 : 00000000ffef079c x7 : 00000000fd6f1600 x8 : 0000000000000044 x9 : 0000000000000008
x10: 00000000fd6d1620 x11: 00000000fd6d3a10
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fd6c62cc x15: 0000000000000002
x16: 0000000000002080 x17: 0000000000000000
x18: 00000000fd6cada8 x19: 00000000fd6d1160
x20: 0000000000000200 x21: 000000005b040300
x22: 00000000fd6f1000 x23: 00000000fd6cfdf0
x24: 00000000ffff8000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 00000000fd6d15c0 x29: 00000000fd6c6030

Resetting CPU ...

resetting ...

Quoted 7 lines

Reverting commit 5955c6eeb453 ("imx: add lowlevel init for ARM64") makes it work again.

Unfortunately, I don't have a MEK in my home office but will check Ethernet operation there on Monday as well.

Anyway, does anybody know what exactly is going on?

Regards,
Peng.

Quoted 74 lines

Cheers

Marcel

Quoted 54 lines · Peng Fan

Sometimes we met SERROR, but only to catch it when Linux boots up. Let's enable catching in U-Boot to catch it ealier and ease debug.

---
 arch/arm/mach-imx/Makefile   |  2 +-
 arch/arm/mach-imx/lowlevel.S | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)  create mode 100644

arch/arm/mach-imx/lowlevel.S

arch/arm/mach-imx/Makefile +1 -1
index c3ed62aed6..37675d0558 100644
@@ -204,7 +204,7 @@ endif
 
 targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-
 dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
 
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o
 
 obj-$(CONFIG_MX5) += mx5/

obj-$(CONFIG_MX6) += mx6/

arch/arm/mach- renamed from arch/arm/mach-imx/lowlevel.S +0 -0

imx/lowlevel.S new file mode 100644 index 0000000000..158fdb7d87

arch/arm/mach-imx/lowlevel.S new file +22 -1
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mrs	x0, CurrentEL
+	cmp	x0, #8
+	b.eq	1f
+	ret
+1:
+	msr daifclr, #4
+
+	/* set HCR_EL2.AMO to catch SERROR */
+	mrs	x0, hcr_el2
+	orr	x0, x0, #0x20
+	msr	hcr_el2, x0
+	isb
+	ret
+ENDPROC(lowlevel_init)
--

2.16.4

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist

s.denx.de%2Flistinfo%2Fu-boot&amp;data=02%7C01%7Cpeng.fan%40nxp.co m%7C

Quoted 1 line

d671eca9f1cc4d06a7d008d6ca7661b1%7C686ea1d3bc2b4c6fa92cd99c5c30 1635%7C

Quoted 1 line

0%7C0%7C636919007134459412&amp;sdata=R6xBpoVJHL7meQkRkBi1I8vg MgOTXlFEA

Quoted 1 line

QfMePrDdSc%3D&amp;reserved=0

#4 lore raw

PATCH 1/1 imx: add lowlevel init for ARM64

Quoted 8 lines · Peng Fan

Hi Marcel,

Please apply this patch, Joe has not pick it up.
https://patchwork.ozlabs.org/patch/1085432/

Stefano,

Would you pick it up?

It is acked by Joe, i assign the patch to me in patchwork and I pick it up.

Regards,
Stefano

Quoted 117 lines
Quoted 32 lines

Subject: [REGRESSION] [PATCH] imx: add lowlevel init for ARM64

Hi Peng and Stefano

Unfortunately, this seems to break Ethernet on Colibri iMX8X:

=> dhcp
"Error" handler, esr 0xbf000002
elr: 0000000080049664 lr : 000000008004964c (reloc)
elr: 00000000ffef6664 lr : 00000000ffef664c x0 : 000000005b040288 x1 : 0000000000000001 x2 : 00000000fd6c5ff4 x3 : 0000000000000020 x4 : 00000000fd6c5ff0 x5 : 0000000000000020 x6 : 00000000ffef079c x7 : 00000000fd6f1600 x8 : 0000000000000044 x9 : 0000000000000008
x10: 00000000fd6d1620 x11: 00000000fd6d3a10
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fd6c62cc x15: 0000000000000002
x16: 0000000000002080 x17: 0000000000000000
x18: 00000000fd6cada8 x19: 00000000fd6d1160
x20: 0000000000000200 x21: 000000005b040300
x22: 00000000fd6f1000 x23: 00000000fd6cfdf0
x24: 00000000ffff8000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 00000000fd6d15c0 x29: 00000000fd6c6030

Resetting CPU ...

resetting ...

Quoted 7 lines

Reverting commit 5955c6eeb453 ("imx: add lowlevel init for ARM64") makes it work again.

Unfortunately, I don't have a MEK in my home office but will check Ethernet operation there on Monday as well.

Anyway, does anybody know what exactly is going on?

Regards,
Peng.

Quoted 74 lines

Cheers

Marcel

Quoted 54 lines · Peng Fan

Sometimes we met SERROR, but only to catch it when Linux boots up. Let's enable catching in U-Boot to catch it ealier and ease debug.

---
 arch/arm/mach-imx/Makefile   |  2 +-
 arch/arm/mach-imx/lowlevel.S | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)  create mode 100644

arch/arm/mach-imx/lowlevel.S

arch/arm/mach-imx/Makefile +1 -1
index c3ed62aed6..37675d0558 100644
@@ -204,7 +204,7 @@ endif
 
 targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-
 dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
 
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o
 
 obj-$(CONFIG_MX5) += mx5/

obj-$(CONFIG_MX6) += mx6/

arch/arm/mach- renamed from arch/arm/mach-imx/lowlevel.S +0 -0

imx/lowlevel.S new file mode 100644 index 0000000000..158fdb7d87

arch/arm/mach-imx/lowlevel.S new file +22 -1
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	mrs	x0, CurrentEL
+	cmp	x0, #8
+	b.eq	1f
+	ret
+1:
+	msr daifclr, #4
+
+	/* set HCR_EL2.AMO to catch SERROR */
+	mrs	x0, hcr_el2
+	orr	x0, x0, #0x20
+	msr	hcr_el2, x0
+	isb
+	ret
+ENDPROC(lowlevel_init)
--

2.16.4

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist

s.denx.de%2Flistinfo%2Fu-boot&amp;data=02%7C01%7Cpeng.fan%40nxp.co m%7C

Quoted 1 line

d671eca9f1cc4d06a7d008d6ca7661b1%7C686ea1d3bc2b4c6fa92cd99c5c30 1635%7C

Quoted 1 line

0%7C0%7C636919007134459412&amp;sdata=R6xBpoVJHL7meQkRkBi1I8vg MgOTXlFEA

Quoted 1 line

QfMePrDdSc%3D&amp;reserved=0

#5 lore raw

PATCH 1/1 imx: add lowlevel init for ARM64

Quoted 12 lines · Stefano Babic
Quoted 9 lines · Peng Fan

Hi Marcel,

Please apply this patch, Joe has not pick it up.
https://patchwork.ozlabs.org/patch/1085432/

Quoted 16 lines
Quoted 3 lines

Stefano,

Would you pick it up?

It is acked by Joe, i assign the patch to me in patchwork and I pick it up.

Regards,
Stefano

Quoted 7 lines
Quoted 7 lines

Subject: [REGRESSION] [PATCH] imx: add lowlevel init for ARM64

Hi Peng and Stefano

Unfortunately, this seems to break Ethernet on Colibri iMX8X:

Has this been addressed?

Quoted 114 lines
Quoted 28 lines
Quoted 28 lines

=> dhcp
"Error" handler, esr 0xbf000002
elr: 0000000080049664 lr : 000000008004964c (reloc)
elr: 00000000ffef6664 lr : 00000000ffef664c x0 : 000000005b040288 x1 : 0000000000000001 x2 : 00000000fd6c5ff4 x3 : 0000000000000020 x4 : 00000000fd6c5ff0 x5 : 0000000000000020 x6 : 00000000ffef079c x7 : 00000000fd6f1600 x8 : 0000000000000044 x9 : 0000000000000008
x10: 00000000fd6d1620 x11: 00000000fd6d3a10
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fd6c62cc x15: 0000000000000002
x16: 0000000000002080 x17: 0000000000000000
x18: 00000000fd6cada8 x19: 00000000fd6d1160
x20: 0000000000000200 x21: 000000005b040300
x22: 00000000fd6f1000 x23: 00000000fd6cfdf0
x24: 00000000ffff8000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 00000000fd6d15c0 x29: 00000000fd6c6030

Resetting CPU ...

resetting ...

Reverting commit 5955c6eeb453 ("imx: add lowlevel init for ARM64") makes it work again.

Quoted 82 lines
Quoted 4 lines

Unfortunately, I don't have a MEK in my home office but will check Ethernet operation there on Monday as well.

Anyway, does anybody know what exactly is going on?

Regards,
Peng.

Quoted 74 lines

Cheers

Marcel

Quoted 55 lines · Peng Fan

Sometimes we met SERROR, but only to catch it when Linux boots up. Let's enable catching in U-Boot to catch it ealier and ease debug.

---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/lowlevel.S | 22 ++++++++++++++++++++++

2 files changed, 23 insertions(+), 1 deletion(-)  create mode 100644

arch/arm/mach-imx/lowlevel.S

arch/arm/mach-imx/Makefile +0 -0
index c3ed62aed6..37675d0558 100644
@@ -204,7 +204,7 @@ endif
 

targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot- dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)

arch/arm/mach-imx/Makefile +1 -1
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o

obj-$(CONFIG_MX5) += mx5/
obj-$(CONFIG_MX6) += mx6/

arch/arm/mach- renamed from arch/arm/mach-imx/lowlevel.S +0 -0

imx/lowlevel.S new file mode 100644 index 0000000000..158fdb7d87

arch/arm/mach-imx/lowlevel.S new file +22 -1
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+    mrs    x0, CurrentEL
+    cmp    x0, #8
+    b.eq    1f
+    ret
+1:
+    msr daifclr, #4
+
+    /* set HCR_EL2.AMO to catch SERROR */
+    mrs    x0, hcr_el2
+    orr    x0, x0, #0x20
+    msr    hcr_el2, x0
+    isb
+    ret
+ENDPROC(lowlevel_init)
--

2.16.4

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist

s.denx.de%2Flistinfo%2Fu-boot&amp;data=02%7C01%7Cpeng.fan%40nxp.co m%7C

Quoted 1 line

d671eca9f1cc4d06a7d008d6ca7661b1%7C686ea1d3bc2b4c6fa92cd99c5c30 1635%7C

Quoted 1 line

0%7C0%7C636919007134459412&amp;sdata=R6xBpoVJHL7meQkRkBi1I8vg MgOTXlFEA

Quoted 1 line

QfMePrDdSc%3D&amp;reserved=0

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

#6 lore raw

PATCH 1/1 imx: add lowlevel init for ARM64

Quoted 21 lines · Joe Hershberger
Quoted 21 lines · Stefano Babic
Quoted 12 lines · Peng Fan

Hi Marcel,

Please apply this patch, Joe has not pick it up.
https://patchwork.ozlabs.org/patch/1085432/

Stefano,

Would you pick it up?

It is acked by Joe, i assign the patch to me in patchwork and I pick it up.

Regards,
Stefano

Quoted 1 line
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Subject: [REGRESSION] [PATCH] imx: add lowlevel init for ARM64

Hi Peng and Stefano

Unfortunately, this seems to break Ethernet on Colibri iMX8X:

Has this been addressed?

Yes, sorry. The following patch as suggested by Peng does fix it:

https://patchwork.ozlabs.org/patch/1085432/

Thanks!

Quoted 119 lines
Quoted 119 lines
Quoted 28 lines
Quoted 28 lines

=> dhcp
"Error" handler, esr 0xbf000002
elr: 0000000080049664 lr : 000000008004964c (reloc)
elr: 00000000ffef6664 lr : 00000000ffef664c x0 : 000000005b040288 x1 : 0000000000000001 x2 : 00000000fd6c5ff4 x3 : 0000000000000020 x4 : 00000000fd6c5ff0 x5 : 0000000000000020 x6 : 00000000ffef079c x7 : 00000000fd6f1600 x8 : 0000000000000044 x9 : 0000000000000008
x10: 00000000fd6d1620 x11: 00000000fd6d3a10
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fd6c62cc x15: 0000000000000002
x16: 0000000000002080 x17: 0000000000000000
x18: 00000000fd6cada8 x19: 00000000fd6d1160
x20: 0000000000000200 x21: 000000005b040300
x22: 00000000fd6f1000 x23: 00000000fd6cfdf0
x24: 00000000ffff8000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 00000000fd6d15c0 x29: 00000000fd6c6030

Resetting CPU ...

resetting ...

Reverting commit 5955c6eeb453 ("imx: add lowlevel init for ARM64") makes
it work again.

Quoted 87 lines
Quoted 5 lines

Unfortunately, I don't have a MEK in my home office but will check Ethernet
operation there on Monday as well.

Anyway, does anybody know what exactly is going on?

Regards,
Peng.

Quoted 78 lines

Cheers

Marcel

Quoted 61 lines · Peng Fan

Sometimes we met SERROR, but only to catch it when Linux boots up.
Let's enable catching in U-Boot to catch it ealier and ease debug.

---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/lowlevel.S | 22 ++++++++++++++++++++++

2 files changed, 23 insertions(+), 1 deletion(-)  create mode

100644
arch/arm/mach-imx/lowlevel.S

arch/arm/mach- renamed from arch/arm/mach-imx/Makefile +0 -0

imx/Makefile
index c3ed62aed6..37675d0558 100644

arch/arm/mach-imx/Makefile +0 -0
@@ -204,7 +204,7 @@ endif
 

targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u- boot-
dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)

arch/arm/mach-imx/Makefile +1 -1
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o

obj-$(CONFIG_MX5) += mx5/
obj-$(CONFIG_MX6) += mx6/

arch/arm/mach- renamed from arch/arm/mach-imx/lowlevel.S +0 -0

imx/lowlevel.S new file mode 100644 index
0000000000..158fdb7d87

arch/arm/mach-imx/lowlevel.S new file +22 -1
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+    mrs    x0, CurrentEL
+    cmp    x0, #8
+    b.eq    1f
+    ret
+1:
+    msr daifclr, #4
+
+    /* set HCR_EL2.AMO to catch SERROR */
+    mrs    x0, hcr_el2
+    orr    x0, x0, #0x20
+    msr    hcr_el2, x0
+    isb
+    ret
+ENDPROC(lowlevel_init)
--

2.16.4

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist

s.denx.de%2Flistinfo%2Fu- boot&amp;data=02%7C01%7Cpeng.fan%40nxp.co
m%7C d671eca9f1cc4d06a7d008d6ca7661b1%7C686ea1d3bc2b4c6fa92cd99c5c30 1635%7C 0%7C0%7C636919007134459412&amp;sdata=R6xBpoVJHL7meQkRkBi1I8vg MgOTXlFEA

Quoted 1 line

QfMePrDdSc%3D&amp;reserved=0

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot