Skip to contentSkip to conversation

arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C

PATCH New Krzysztof Kozlowski 2 participants 6 messages May 11, 2019 – May 16, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/3 arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C

The CONFIG_POWER and CONFIG_POWER_I2C were introduced in include/configs/exynos5-common.h in commit 19bd3aaa5991 ("exynos5: fix build break by adding CONFIG_POWER") and then it propagated up to include/configs/arndale.h. However before that commit, there was no build break at all on Arndale and SMDK5250 boards. It seems the commit fixed nothing and just added unused defines.

In fact, the Arndale board is not configuring its PMIC (S5M8767) which uses I2C bus.

---

Not tested on Arndale board. Testing is welcomed.

Changes since v1:
1. Add Simon's tag.
2. Reorder patches - first remove CONFIG_POWER_I2C, then CONFIG_DM_I2C_COMPAT.

---
 include/configs/arndale.h | 8 --------
 1 file changed, 8 deletions(-)
include/configs/arndale.h +0 -8
index dd321c4748d0..841f3616482b 100644
@@ -29,10 +29,6 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-
 #define CONFIG_PREBOOT
 
 #define CONFIG_S5P_PA_SYSRAM	0x02020000
@@ -41,8 +37,4 @@
 /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */
 #define CONFIG_ARM_GIC_BASE_ADDRESS	0x10480000
 
-/* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-
 #endif	/* __CONFIG_H */
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 2/3 arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT

The CONFIG_DM_I2C_COMPAT was introduced in include/configs/exynos5-common.h in commit 189d80166b31 ("exynos5:
enable dm i2c") and then it propagated up to configs/arndale_defconfig. However since beginning the Arndale board (Exynos5250) was not using I2C.

In fact, the Arndale board is not configuring its PMIC (S5M8767) which uses I2C bus. This setting can be thus safely removed to fix build warning:

This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list.

---

Not tested on Arndale board. Testing is welcomed.

Changes since v1:
1. Add Simon's tag.
2. Reorder patches - first remove CONFIG_POWER_I2C, then CONFIG_DM_I2C_COMPAT.

---
 configs/arndale_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/arndale_defconfig +0 -1
index 9727d28c1241..e90d670f6813 100644
@@ -25,7 +25,6 @@ CONFIG_CMD_SOUND=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
 CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM_I2C_COMPAT=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
Signature · 1 line
2.17.1
#3 lore raw

PATCH v2 3/3 configs: arndale: Use appropriate driver for Asix AX88760

In reply to Krzysztof Kozlowski

Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX.

The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different.

Fixes f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig")

---

Not tested.

Changes since v1:
1. Add Lukasz's tag.

---
 configs/arndale_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/arndale_defconfig +1 -1
index e90d670f6813..37ad6accc396 100644
@@ -42,4 +42,4 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_ASIX=y
Signature · 1 line
2.17.1
#2 lore raw

PATCH v2 2/3 arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT

In reply to Krzysztof Kozlowski

Hi,

Quoted 35 lines · Krzysztof Kozlowski

The CONFIG_DM_I2C_COMPAT was introduced in include/configs/exynos5-common.h in commit 189d80166b31 ("exynos5:
enable dm i2c") and then it propagated up to configs/arndale_defconfig. However since beginning the Arndale board (Exynos5250) was not using I2C.

In fact, the Arndale board is not configuring its PMIC (S5M8767) which uses I2C bus. This setting can be thus safely removed to fix build warning:

This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list.

---

Not tested on Arndale board. Testing is welcomed.

Changes since v1:
1. Add Simon's tag.
2. Reorder patches - first remove CONFIG_POWER_I2C, then CONFIG_DM_I2C_COMPAT.

---
 configs/arndale_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/arndale_defconfig +0 -0
index 9727d28c1241..e90d670f6813 100644

configs/arndale_defconfig CONFIG_CMD_SOUND=y · line 30

Quoted 7 lines
configs/arndale_defconfig +0 -1
@@ -25,7 +25,6 @@ CONFIG_CMD_SOUND=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
 CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM_I2C_COMPAT=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y

applied to u-boot-samsung.

Thanks,
Minkyu Kang.

#5 lore raw

PATCH v2 1/3 arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C

In reply to Krzysztof Kozlowski

Hi,

Quoted 42 lines · Krzysztof Kozlowski

The CONFIG_POWER and CONFIG_POWER_I2C were introduced in include/configs/exynos5-common.h in commit 19bd3aaa5991 ("exynos5: fix build break by adding CONFIG_POWER") and then it propagated up to include/configs/arndale.h. However before that commit, there was no build break at all on Arndale and SMDK5250 boards. It seems the commit fixed nothing and just added unused defines.

In fact, the Arndale board is not configuring its PMIC (S5M8767) which uses I2C bus.

---

Not tested on Arndale board. Testing is welcomed.

Changes since v1:
1. Add Simon's tag.
2. Reorder patches - first remove CONFIG_POWER_I2C, then CONFIG_DM_I2C_COMPAT.

---
 include/configs/arndale.h | 8 --------
 1 file changed, 8 deletions(-)
include/configs/arndale.h +0 -4
index dd321c4748d0..841f3616482b 100644
@@ -29,10 +29,6 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-
 #define CONFIG_PREBOOT
 
 #define CONFIG_S5P_PA_SYSRAM	0x02020000

include/configs/arndale.h line 40

Quoted 8 lines
include/configs/arndale.h +0 -4
@@ -41,8 +37,4 @@
 /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */
 #define CONFIG_ARM_GIC_BASE_ADDRESS	0x10480000
 
-/* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-
 #endif	/* __CONFIG_H */

applied to u-boot-samsung.

Thanks,
Minkyu Kang.

#4 lore raw

PATCH v2 3/3 configs: arndale: Use appropriate driver for Asix AX88760

In reply to Krzysztof Kozlowski

Hi,

Quoted 29 lines · Krzysztof Kozlowski

Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX.

The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different.

Fixes f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig")

---

Not tested.

Changes since v1:
1. Add Lukasz's tag.

---
 configs/arndale_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/arndale_defconfig +0 -0
index e90d670f6813..37ad6accc396 100644

configs/arndale_defconfig CONFIG_USB_XHCI_HCD=y · line 45

Quoted 5 lines
configs/arndale_defconfig +1 -1
@@ -42,4 +42,4 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_ASIX=y

applied to u-boot-samsung.

Thanks,
Minkyu Kang.