Skip to contentSkip to conversation

genirq/timings: Fixes and selftests

PATCH Superseded Daniel Lezcano 2 participants 12 messages May 13, 2019

Subsystems (2)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover genirq/timings: Fixes and selftests

This series provides a couple of fixes, an optimization and the code to do the selftests.

While writing the selftests, a couple of issues were spotted with the circular buffer handling and the routine searching for the pattern multiple times.

In addition, a small optimization has been found while investigating the bugs above.

In order to write the selftest, the routine needed by the core code and the tests are wrapped into function which are always inline so the current code is not impacted by a new function call. There is no functional changes in this part.

Finally, the selftest uses samples to insert values in the arrays and use them to predict the next event. These tests cover the most difficult part of the code.

Daniel Lezcano (9):
genirq/timings: Fix next event index function genirq/timings: Fix timings buffer inspection genirq/timings: Optimize the period detection speed genirq/timings: Use the min kernel macro genirq/timings: Encapsulate timings push genirq/timings: Encapsulate storing function genirq/timings: Add selftest for circular array genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for next event computation

 kernel/irq/Makefile    |   3 +
 kernel/irq/internals.h |  21 +-
 kernel/irq/timings.c   | 458 +++++++++++++++++++++++++++++++++++++----
 lib/Kconfig.debug      |   9 +
 4 files changed, 446 insertions(+), 45 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/9 genirq/timings: Fix next event index function

The current code was luckily working with most of the interval samples testing but actually it fails to correctly detect pattern repeatition breaking at the end of the buffer.

Narrowing down the bug has been a real pain because of the pointers, so the routine is rewrite by using indexes instead.

Fixes bbba0e7c5cda "genirq/timings: Add array suffix computation code"
---
 kernel/irq/timings.c | 53 ++++++++++++++++++++++++++++++++++++--------
 1 file changed, 44 insertions(+), 9 deletions(-)
kernel/irq/timings.c +44 -9
index 90c735da15d0..60362aca4ca4 100644
@@ -297,7 +297,18 @@ static u64 irq_timings_ema_new(u64 value, u64 ema_old)
 
 static int irq_timings_next_event_index(int *buffer, size_t len, int period_max)
 {
-	int i;
+	int period;
+
+	/*
+	 * Move the beginnning pointer to the end minus the max period
+	 * x 3. We are at the point we can begin searching the pattern
+	 */
+	buffer = &buffer[len - (period_max * 3)];
+
+	/*
+	 * Adjust the length to the maximum allowed period x 3
+	 */
+	len = period_max * 3;
 
 	/*
 	 * The buffer contains the suite of intervals, in a ilog2
@@ -306,21 +317,45 @@ static int irq_timings_next_event_index(int *buffer, size_t len, int period_max)
 	 * period beginning at the end of the buffer. We do that for
 	 * each suffix.
 	 */
-	for (i = period_max; i >= PREDICTION_PERIOD_MIN ; i--) {
+	for (period = period_max; period >= PREDICTION_PERIOD_MIN ; period--) {
 
-		int *begin = &buffer[len - (i * 3)];
-		int *ptr = begin;
+		/*
+		 * The first comparison always succeed because the
+		 * suffix is deduced from the first n-period bytes of
+		 * the buffer and we compare the initial suffix with
+		 * itself, so we can skip the first iteration.
+		 */
+		int idx = period;
+		size_t size = period;
 
 		/*
 		 * We look if the suite with period 'i' repeat
 		 * itself. If it is truncated at the end, as it
 		 * repeats we can use the period to find out the next
-		 * element.
+		 * element with the modulo.
 		 */
-		while (!memcmp(ptr, begin, i * sizeof(*ptr))) {
-			ptr += i;
-			if (ptr >= &buffer[len])
-				return begin[((i * 3) % i)];
+		while (!memcmp(buffer, &buffer[idx], size * sizeof(int))) {
+
+			/*
+			 * Move the index in a period basis
+			 */
+			idx += size;
+
+			/*
+			 * If this condition is reached, all previous
+			 * memcmp were successful, so the period is
+			 * found.
+			 */
+			if (idx == len)
+				return buffer[len % period];
+
+			/*
+			 * If the remaining elements to compare are
+			 * smaller than the period, readjust the size
+			 * of the comparison for the last iteration.
+			 */
+			if (len - idx < period)
+				size = len - idx;
 		}
 	}
 
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/9 genirq/timings: Fix timings buffer inspection

In reply to Daniel Lezcano

It appears the index beginning computation is not correct, the current code does:

     i = (irqts->count & IRQ_TIMINGS_MASK) - 1

If irqts->count is equal to zero, we end up with an index equal to -1, but that does not happen because the function checks against zero before and returns in such case.

However, if irqts->count is a multiple of IRQ_TIMINGS_SIZE, the resulting & bit op will be zero and leads also to a -1 index.

Re-introduce the iteration loop belonging to the previous variance code which was correct.

Fixes bbba0e7c5cda "genirq/timings: Add array suffix computation code"
---
 kernel/irq/timings.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)
kernel/irq/timings.c +18 -5
index 60362aca4ca4..250bb00ccd85 100644
@@ -267,6 +267,23 @@ void irq_timings_disable(void)
 #define PREDICTION_MAX		10 /* 2 ^ PREDICTION_MAX useconds */
 #define PREDICTION_BUFFER_SIZE	16 /* slots for EMAs, hardly more than 16 */
 
+/*
+ * Number of elements in the circular buffer: If it happens it was
+ * flushed before, then the number of elements could be smaller than
+ * IRQ_TIMINGS_SIZE, so the count is used, otherwise the array size is
+ * used as we wrapped. The index begins from zero when we did not
+ * wrap. That could be done in a nicer way with the proper circular
+ * array structure type but with the cost of extra computation in the
+ * interrupt handler hot path. We choose efficiency.
+ */
+#define for_each_irqts(i, irqts)					\
+	for (i = irqts->count < IRQ_TIMINGS_SIZE ?			\
+		     0 : irqts->count & IRQ_TIMINGS_MASK,		\
+		     irqts->count = min(IRQ_TIMINGS_SIZE,		\
+					irqts->count);			\
+	     irqts->count > 0; irqts->count--,				\
+		     i = (i + 1) & IRQ_TIMINGS_MASK)
+
 struct irqt_stat {
 	u64	last_ts;
 	u64	ema_time[PREDICTION_BUFFER_SIZE];
@@ -528,11 +545,7 @@ u64 irq_timings_next_event(u64 now)
 	 * model while decrementing the counter because we consume the
 	 * data from our circular buffer.
 	 */
-
-	i = (irqts->count & IRQ_TIMINGS_MASK) - 1;
-	irqts->count = min(IRQ_TIMINGS_SIZE, irqts->count);
-
-	for (; irqts->count > 0; irqts->count--, i = (i + 1) & IRQ_TIMINGS_MASK) {
+	for_each_irqts(i, irqts) {
 		irq = irq_timing_decode(irqts->values[i], &ts);
 		s = idr_find(&irqt_stats, irq);
 		if (s)
Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/9 genirq/timings: Optimize the period detection speed

In reply to Daniel Lezcano

If we have a minimal period and if there is a period which is a multiple of it but lesser than the max period then it will be detected before and the minimal period will be never reached.

1 2 1 2 1 2 1 2 1 2 1 2
<-----> <-----> <----->
<-> <-> <-> <-> <-> <->

In our case, the minimum period is 2 and the maximum period is 5. That means all repeating pattern of 2 will be detected as repeating pattern of 4, it is pointless to go up to 2 when searching for the period as it will always fail.

Remove one loop iteration by increasing the minimal period to 3.

---
 kernel/irq/timings.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/irq/timings.c +1 -1
index 250bb00ccd85..06bde5253a7d 100644
@@ -261,7 +261,7 @@ void irq_timings_disable(void)
 #define EMA_ALPHA_VAL		64
 #define EMA_ALPHA_SHIFT		7
 
-#define PREDICTION_PERIOD_MIN	2
+#define PREDICTION_PERIOD_MIN	3
 #define PREDICTION_PERIOD_MAX	5
 #define PREDICTION_FACTOR	4
 #define PREDICTION_MAX		10 /* 2 ^ PREDICTION_MAX useconds */
Signature · 1 line
2.17.1
#4 lore raw

PATCH 4/9 genirq/timings: Use the min kernel macro

In reply to Daniel Lezcano

The' min' is available as a kernel macro. Use it instead of writing the same code.

---
 kernel/irq/timings.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
kernel/irq/timings.c +1 -2
index 06bde5253a7d..8928601b4b42 100644
@@ -406,8 +406,7 @@ static u64 __irq_timings_next_event(struct irqt_stat *irqs, int irq, u64 now)
 	/*
 	 * 'count' will depends if the circular buffer wrapped or not
 	 */
-	count = irqs->count < IRQ_TIMINGS_SIZE ?
-		irqs->count : IRQ_TIMINGS_SIZE;
+	count = min_t(int, irqs->count,  IRQ_TIMINGS_SIZE);
 
 	start = irqs->count < IRQ_TIMINGS_SIZE ?
 		0 : (irqs->count & IRQ_TIMINGS_MASK);
Signature · 1 line
2.17.1
#5 lore raw

PATCH 5/9 genirq/timings: Encapsulate timings push

In reply to Daniel Lezcano

For the next patches providing the selftest, we do want to artificially insert timings value in the circular buffer in order to check the correctness of the code. Encapsulate the common code between the future test code and the current with an always-inline tag.

No functional change.

---
 kernel/irq/internals.h | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)
kernel/irq/internals.h +12 -9
index 70c3053bc1f6..21f9927ff5ad 100644
@@ -354,6 +354,16 @@ static inline int irq_timing_decode(u64 value, u64 *timestamp)
 	return value & U16_MAX;
 }
 
+static __always_inline void irq_timings_push(u64 ts, int irq)
+{
+	struct irq_timings *timings = this_cpu_ptr(&irq_timings);
+
+	timings->values[timings->count & IRQ_TIMINGS_MASK] =
+		irq_timing_encode(ts, irq);
+
+	timings->count++;
+}
+
 /*
  * The function record_irq_time is only called in one place in the
  * interrupts handler. We want this function always inline so the code
@@ -367,15 +377,8 @@ static __always_inline void record_irq_time(struct irq_desc *desc)
 	if (!static_branch_likely(&irq_timing_enabled))
 		return;
 
-	if (desc->istate & IRQS_TIMINGS) {
-		struct irq_timings *timings = this_cpu_ptr(&irq_timings);
-
-		timings->values[timings->count & IRQ_TIMINGS_MASK] =
-			irq_timing_encode(local_clock(),
-					  irq_desc_get_irq(desc));
-
-		timings->count++;
-	}
+	if (desc->istate & IRQS_TIMINGS)
+		irq_timings_push(local_clock(), irq_desc_get_irq(desc));
 }
 #else
 static inline void irq_remove_timings(struct irq_desc *desc) {}
Signature · 1 line
2.17.1
#6 lore raw

PATCH 6/9 genirq/timings: Encapsulate storing function

In reply to Daniel Lezcano

For the next patches providing the selftest, we want to insert interval values directly in the buffer in order to check the correctness of the code. Encapsulate the code doing that in a always inline function in order to reuse it in the test code.

No functional changes.

---
 kernel/irq/timings.c | 53 ++++++++++++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 19 deletions(-)
kernel/irq/timings.c +34 -19
index 8928601b4b42..02689e6168c4 100644
@@ -431,11 +431,43 @@ static u64 __irq_timings_next_event(struct irqt_stat *irqs, int irq, u64 now)
 	return irqs->last_ts + irqs->ema_time[index];
 }
 
+static __always_inline int irq_timings_interval_index(u64 interval)
+{
+	/*
+	 * The PREDICTION_FACTOR increase the interval size for the
+	 * array of exponential average.
+	 */
+	u64 interval_us = (interval >> 10) / PREDICTION_FACTOR;
+
+	return likely(interval_us) ? ilog2(interval_us) : 0;
+}
+
+static __always_inline void __irq_timings_store(int irq, struct irqt_stat *irqs,
+						u64 interval)
+{
+	int index;
+
+	/*
+	 * Get the index in the ema table for this interrupt.
+	 */
+	index = irq_timings_interval_index(interval);
+
+	/*
+	 * Store the index as an element of the pattern in another
+	 * circular array.
+	 */
+	irqs->circ_timings[irqs->count & IRQ_TIMINGS_MASK] = index;
+
+	irqs->ema_time[index] = irq_timings_ema_new(interval,
+						    irqs->ema_time[index]);
+
+	irqs->count++;
+}
+
 static inline void irq_timings_store(int irq, struct irqt_stat *irqs, u64 ts)
 {
 	u64 old_ts = irqs->last_ts;
 	u64 interval;
-	int index;
 
 	/*
 	 * The timestamps are absolute time values, we need to compute
@@ -466,24 +498,7 @@ static inline void irq_timings_store(int irq, struct irqt_stat *irqs, u64 ts)
 		return;
 	}
 
-	/*
-	 * Get the index in the ema table for this interrupt. The
-	 * PREDICTION_FACTOR increase the interval size for the array
-	 * of exponential average.
-	 */
-	index = likely(interval) ?
-		ilog2((interval >> 10) / PREDICTION_FACTOR) : 0;
-
-	/*
-	 * Store the index as an element of the pattern in another
-	 * circular array.
-	 */
-	irqs->circ_timings[irqs->count & IRQ_TIMINGS_MASK] = index;
-
-	irqs->ema_time[index] = irq_timings_ema_new(interval,
-						    irqs->ema_time[index]);
-
-	irqs->count++;
+	__irq_timings_store(irq, irqs, interval);
 }
 
 /**
Signature · 1 line
2.17.1
#7 lore raw

PATCH 7/9 genirq/timings: Add selftest for circular array

In reply to Daniel Lezcano

Due to the complexity of the code and the difficulty to debug it, let's add some selftests to the framework in order to spot issues or regression at boot time when the runtime testing is enabled for this subsystem.

This tests the circular buffer at the limits and validates:
- the encoding / decoding of the values
- the macro to browse the irq timings circular buffer
- the function to push data in the circular buffer

---
 kernel/irq/Makefile  |   3 ++
 kernel/irq/timings.c | 119 +++++++++++++++++++++++++++++++++++++++++++
 lib/Kconfig.debug    |   9 ++++
 3 files changed, 131 insertions(+)
kernel/irq/Makefile +3 -0
index ff6e352e3a6c..b4f53717d143 100644
@@ -2,6 +2,9 @@
 
 obj-y := irqdesc.o handle.o manage.o spurious.o resend.o chip.o dummychip.o devres.o
 obj-$(CONFIG_IRQ_TIMINGS) += timings.o
+ifeq ($(CONFIG_TEST_IRQ_TIMINGS),y)
+	CFLAGS_timings.o += -DDEBUG
+endif
 obj-$(CONFIG_GENERIC_IRQ_CHIP) += generic-chip.o
 obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
 obj-$(CONFIG_IRQ_DOMAIN) += irqdomain.o
kernel/irq/timings.c +119 -0

132 lines not on this page · raw message

lib/Kconfig.debug +9 -0
index 0d9e81779e37..a05c6695f6f9 100644
@@ -1827,6 +1827,15 @@ config TEST_PARMAN
 
 	  If unsure, say N.
 
+config TEST_IRQ_TIMINGS
+	bool "IRQ timings selftest"
+	default n
+	depends on IRQ_TIMINGS
+	help
+	  Enable this option to test the irq timings code on boot.
+
+	  If unsure, say N.
+
 config TEST_LKM
 	tristate "Test module loading with 'hello world' module"
 	depends on m
Signature · 1 line
2.17.1
#8 lore raw

Re: [PATCH 7/9] genirq/timings: Add selftest for circular array

Quoted 11 lines · Daniel Lezcano

Due to the complexity of the code and the difficulty to debug it, let's add some selftests to the framework in order to spot issues or regression at boot time when the runtime testing is enabled for this subsystem.

This tests the circular buffer at the limits and validates:
- the encoding / decoding of the values
- the macro to browse the irq timings circular buffer
- the function to push data in the circular buffer

 kernel/irq/timings.c | 119 +++++++++++++++++++++++++++++++++++++++++++

Is it possible to have it in a separate C-file?

lib/Kconfig.debug config TEST_PARMAN · line 1832

Quoted 4 lines
lib/Kconfig.debug +3 -0
+config TEST_IRQ_TIMINGS
+	bool "IRQ timings selftest"
 
+	default n

This is already default.

Quoted 5 lines
lib/Kconfig.debug +5 -0
+	depends on IRQ_TIMINGS
+	help
+	  Enable this option to test the irq timings code on boot.
+
+	  If unsure, say N.
Signature · 2 lines
With Best Regards,
Andy Shevchenko
#9 lore raw

Re: [PATCH 7/9] genirq/timings: Add selftest for circular array

Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Daniel Lezcano

Due to the complexity of the code and the difficulty to debug it, let's add some selftests to the framework in order to spot issues or regression at boot time when the runtime testing is enabled for this subsystem.

Quoted 8 lines
Quoted 6 lines

This tests the circular buffer at the limits and validates:
- the encoding / decoding of the values
- the macro to browse the irq timings circular buffer
- the function to push data in the circular buffer

 kernel/irq/timings.c | 119 +++++++++++++++++++++++++++++++++++++++++++

Is it possible to have it in a separate C-file?

It is possible but I would like to keep the selftest in the same file in order to keep all the structures and functions self-contained.

Quoted 6 lines

lib/Kconfig.debug config TEST_PARMAN · line 1832

Quoted 4 lines
lib/Kconfig.debug +3 -0
+config TEST_IRQ_TIMINGS
+	bool "IRQ timings selftest"
 
+	default n

This is already default.

Right, thanks for the review.

Quoted 6 lines
Quoted 5 lines
lib/Kconfig.debug +5 -0
+	depends on IRQ_TIMINGS
+	help
+	  Enable this option to test the irq timings code on boot.
+
+	  If unsure, say N.
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#10 lore raw

PATCH 8/9 genirq/timings: Add selftest for irqs circular buffer

In reply to Daniel Lezcano

After testing the per cpu interrupt circular event, we want to make sure the per interrupt circular buffer usage is correct.

Add tests to validate the interrupt circular buffer.

---
 kernel/irq/timings.c | 139 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 139 insertions(+)
kernel/irq/timings.c +139 -0
index dae04117796c..5e4efac967fd 100644
@@ -630,6 +630,141 @@ int irq_timings_alloc(int irq)
 }
 
 #ifdef CONFIG_TEST_IRQ_TIMINGS
+struct timings_intervals {
+	u64 *intervals;
+	size_t count;
+};
+
+/*
+ * Intervals are given in nanosecond base
+ */
+static u64 intervals0[] __initdata = {
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000, 500000,
+	10000, 50000, 200000,
+};
+
+static u64 intervals1[] __initdata = {
+	223947000, 1240000, 1384000, 1386000, 1386000,
+	217416000, 1236000, 1384000, 1386000, 1387000,
+	214719000, 1241000, 1386000, 1387000, 1384000,
+	213696000, 1234000, 1384000, 1386000, 1388000,
+	219904000, 1240000, 1385000, 1389000, 1385000,
+	212240000, 1240000, 1386000, 1386000, 1386000,
+	214415000, 1236000, 1384000, 1386000, 1387000,
+	214276000, 1234000,
+};
+
+static u64 intervals2[] __initdata = {
+	4000, 3000, 5000, 100000,
+	3000, 3000, 5000, 117000,
+	4000, 4000, 5000, 112000,
+	4000, 3000, 4000, 110000,
+	3000, 5000, 3000, 117000,
+	4000, 4000, 5000, 112000,
+	4000, 3000, 4000, 110000,
+	3000, 4000, 5000, 112000,
+	4000,
+};
+
+static u64 intervals3[] __initdata = {
+	1385000, 212240000, 1240000,
+	1386000, 214415000, 1236000,
+	1384000, 214276000, 1234000,
+	1386000, 214415000, 1236000,
+	1385000, 212240000, 1240000,
+	1386000, 214415000, 1236000,
+	1384000, 214276000, 1234000,
+	1386000, 214415000, 1236000,
+	1385000, 212240000, 1240000,
+};
+
+static u64 intervals4[] __initdata = {
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000, 50000, 10000, 50000,
+	10000,
+};
+
+static struct timings_intervals tis[] __initdata = {
+	{ intervals0, ARRAY_SIZE(intervals0) },
+	{ intervals1, ARRAY_SIZE(intervals1) },
+	{ intervals2, ARRAY_SIZE(intervals2) },
+	{ intervals3, ARRAY_SIZE(intervals3) },
+	{ intervals4, ARRAY_SIZE(intervals4) },
+};
+
+static int __init irq_timings_test_irqs(struct timings_intervals *ti)
+{
+	struct irqt_stat __percpu *s;
+	struct irqt_stat *irqs;
+	int i, index, ret, irq = 0xACE5;
+
+	ret = irq_timings_alloc(irq);
+	if (ret) {
+		pr_err("Failed to allocate irq timings\n");
+		return ret;
+	}
+
+	s = idr_find(&irqt_stats, irq);
+	if (!s) {
+		ret = -EIDRM;
+		goto out;
+	}
+
+	irqs = this_cpu_ptr(s);
+
+	for (i = 0; i < ti->count; i++) {
+
+		index = irq_timings_interval_index(ti->intervals[i]);
+		pr_debug("%d: interval=%llu ema_index=%d\n",
+			 i, ti->intervals[i], index);
+
+		__irq_timings_store(irq, irqs, ti->intervals[i]);
+		if (irqs->circ_timings[i & IRQ_TIMINGS_MASK] != index) {
+			pr_err("Failed to store in the circular buffer\n");
+			goto out;
+		}
+	}
+
+	if (irqs->count != ti->count) {
+		pr_err("Count differs\n");
+		goto out;
+	}
+
+	ret = 0;
+out:
+	irq_timings_free(irq);
+
+	return ret;
+}
+
+static int __init irq_timings_irqs_selftest(void)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(tis); i++) {
+		pr_info("---> Injecting intervals number #%d (count=%zd)\n",
+			i, tis[i].count);
+		ret = irq_timings_test_irqs(&tis[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
 static int __init irq_timings_test_irqts(struct irq_timings *irqts,
 					 unsigned count)
 {
@@ -737,7 +872,11 @@ static int __init irq_timings_selftest(void)
 	}
 
 	ret = irq_timings_irqts_selftest();
+	if (ret)
+		goto out;
 
+	ret = irq_timings_irqs_selftest();
+out:
 	pr_info("---------- selftest end with %s -----------\n",
 		ret ? "failure" : "success");
 
Signature · 1 line
2.17.1
#11 lore raw

PATCH 9/9 genirq/timings: Add selftest for next event computation

In reply to Daniel Lezcano

The circular buffers are now validated at this point with the two previous patches. The next interrupt index algorithm which is the hardest part to validate can be validated with the tests provided with this patch.

It uses the intervals stored in the arrays and insert all the values except the last one. The next event computation must return the same value as the last element we did not inserted.

Add tests for the next event index computation.

---
 kernel/irq/timings.c | 66 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)
kernel/irq/timings.c +66 -0
index 5e4efac967fd..eb2bb1d1551f 100644
@@ -705,6 +705,68 @@ static struct timings_intervals tis[] __initdata = {
 	{ intervals4, ARRAY_SIZE(intervals4) },
 };
 
+static int __init irq_timings_test_next_index(struct timings_intervals *ti)
+{
+	int _buffer[IRQ_TIMINGS_SIZE];
+	int buffer[IRQ_TIMINGS_SIZE];
+	int index, start, i, count, period_max;
+
+	count = ti->count - 1;
+
+	period_max = count > (3 * PREDICTION_PERIOD_MAX) ?
+		PREDICTION_PERIOD_MAX : count / 3;
+
+	/*
+	 * Inject all values except the last one which will be used
+	 * to compare with the next index result.
+	 */
+	pr_debug("index suite: ");
+
+	for (i = 0; i < count; i++) {
+		index = irq_timings_interval_index(ti->intervals[i]);
+		_buffer[i & IRQ_TIMINGS_MASK] = index;
+		pr_cont("%d ", index);
+	}
+
+	start = count < IRQ_TIMINGS_SIZE ? 0 :
+		count & IRQ_TIMINGS_MASK;
+
+	count = min_t(int, count, IRQ_TIMINGS_SIZE);
+
+	for (i = 0; i < count; i++) {
+		int index = (start + i) & IRQ_TIMINGS_MASK;
+		buffer[i] = _buffer[index];
+	}
+
+	index = irq_timings_next_event_index(buffer, count, period_max);
+	i = irq_timings_interval_index(ti->intervals[ti->count - 1]);
+
+	if (index != i) {
+		pr_err("Expected (%d) and computed (%d) next indexes differ\n",
+		       i, index);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __init irq_timings_next_index_selftest(void)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(tis); i++) {
+
+		pr_info("---> Injecting intervals number #%d (count=%zd)\n",
+			i, tis[i].count);
+
+		ret = irq_timings_test_next_index(&tis[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
 static int __init irq_timings_test_irqs(struct timings_intervals *ti)
 {
 	struct irqt_stat __percpu *s;
@@ -876,6 +938,10 @@ static int __init irq_timings_selftest(void)
 		goto out;
 
 	ret = irq_timings_irqs_selftest();
+	if (ret)
+		goto out;
+
+	ret = irq_timings_next_index_selftest();
 out:
 	pr_info("---------- selftest end with %s -----------\n",
 		ret ? "failure" : "success");
Signature · 1 line
2.17.1