gdbstub: Refactor command packets handler
PATCH v10 1/20 gdbstub: Add infrastructure to parse cmd packets
In reply to Jon Doron--- gdbstub.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+)
gdbstub.c +195 -0
@@ -1268,6 +1268,201 @@ out:return res; } +typedef union GdbCmdVariant { +const char *data; +uint8_t opcode; +unsigned long val_ul; +unsigned long long val_ull; +struct { +GDBThreadIdKind kind; +uint32_t pid; +uint32_t tid; + } thread_id; +}GdbCmdVariant ; + +static const char *cmd_next_param (const char *param,const char delimiter) +{ +static const char all_delimiters[] =",;:=" ; +char curr_delimiters[2 ] = {0 }; +const char *delimiters; + +if (delimiter =='?' ) { + delimiters = all_delimiters; + }else if (delimiter =='0' ) { +return strchr (param,'\0' ); + }else if (delimiter =='.' && *param) { +return param +1 ; + }else { + curr_delimiters[0 ] = delimiter; + delimiters = curr_delimiters; + } + + param +=strcspn (param, delimiters); +if (*param) { + param++; + } +return param; +} + +static int cmd_parse_params (const char *data,const char *schema, +GdbCmdVariant *params,int *num_params) +{ +int curr_param; +const char *curr_schema, *curr_data; + + *num_params =0 ; + +if (!schema) { +return 0 ; + } + + curr_schema = schema; + curr_param =0 ; + curr_data = data; +while (curr_schema[0 ] && curr_schema[1 ] && *curr_data) { +switch (curr_schema[0 ]) { +case 'l' : +if (qemu_strtoul (curr_data, &curr_data,16 , + ¶ms[curr_param].val_ul)) { +return -EINVAL ; + } + curr_param++; + curr_data =cmd_next_param (curr_data, curr_schema[1 ]); +break ; +case 'L' : +if (qemu_strtou64 (curr_data, &curr_data,16 , + (uint64_t *)¶ms[curr_param].val_ull)) { +return -EINVAL ; + } + curr_param++; + curr_data =cmd_next_param (curr_data, curr_schema[1 ]); +break ; +case 's' : + params[curr_param].data = curr_data; + curr_param++; + curr_data =cmd_next_param (curr_data, curr_schema[1 ]); +break ; +case 'o' : + params[curr_param].opcode = *(uint8_t *)curr_data; + curr_param++; + curr_data =cmd_next_param (curr_data, curr_schema[1 ]); +break ; +case 't' : + params[curr_param].thread_id.kind = +read_thread_id (curr_data, &curr_data, + ¶ms[curr_param].thread_id.pid, + ¶ms[curr_param].thread_id.tid); + curr_param++; + curr_data =cmd_next_param (curr_data, curr_schema[1 ]); +break ; +case '?' : + curr_data =cmd_next_param (curr_data, curr_schema[1 ]); +break ; +default : +return -EINVAL ; + } + curr_schema +=2 ; + } + + *num_params = curr_param; +return 0 ; +} + +typedef struct GdbCmdContext { +GDBState *s; +GdbCmdVariant *params; +int num_params; +uint8_t mem_buf[MAX_PACKET_LENGTH ]; +char str_buf[MAX_PACKET_LENGTH +1 ]; +}GdbCmdContext ; + +typedef void (*GdbCmdHandler )(GdbCmdContext *gdb_ctx,void *user_ctx); + +/* +* cmd_startswith -> cmd is compared using startswith +* +* +* schema definitions: +* Each schema parameter entry consists of 2 chars, +* the first char represents the parameter type handling +* the second char represents the delimiter for the next parameter +* +* Currently supported schema types: +* 'l' -> unsigned long (stored in .val_ul) +* 'L' -> unsigned long long (stored in .val_ull) +* 's' -> string (stored in .data) +* 'o' -> single char (stored in .opcode) +* 't' -> thread id (stored in .thread_id) +* '?' -> skip according to delimiter +* +* Currently supported delimiters: +* '?' -> Stop at any delimiter (",;:=\0") +* '0' -> Stop at "\0" +* '.' -> Skip 1 char unless reached "\0" +* Any other value is treated as the delimiter value itself +*/ +typedef struct GdbCmdParseEntry { +GdbCmdHandler handler; +const char *cmd; +bool cmd_startswith; +const char *schema; +}GdbCmdParseEntry ; + +static inline int startswith (const char *string,const char *pattern) +{ +return !strncmp (string, pattern,strlen (pattern)); +} + +static int process_string_cmd ( +GDBState *s,void *user_ctx,const char *data, +const GdbCmdParseEntry *cmds,int num_cmds) + __attribute__((unused)); + +static int process_string_cmd (GDBState *s,void *user_ctx,const char *data, +const GdbCmdParseEntry *cmds,int num_cmds) +{ +int i, schema_len, max_num_params =0 ; +GdbCmdContext gdb_ctx; + +if (!cmds) { +return -1 ; + } + +for (i =0 ; i < num_cmds; i++) { +const GdbCmdParseEntry *cmd = &cmds[i]; +g_assert (cmd->handler && cmd->cmd); + +if ((cmd->cmd_startswith && !startswith (data, cmd->cmd)) || + (!cmd->cmd_startswith &&strcmp (cmd->cmd, data))) { +continue ; + } + +if (cmd->schema) { + schema_len =strlen (cmd->schema); +if (schema_len %2 ) { +return -2 ; + } + + max_num_params = schema_len /2 ; + } + + gdb_ctx.params = + (GdbCmdVariant *)alloca (sizeof (*gdb_ctx.params) * max_num_params); +memset (gdb_ctx.params,0 ,sizeof (*gdb_ctx.params) * max_num_params); + +if (cmd_parse_params (&data[strlen (cmd->cmd)], cmd->schema, + gdb_ctx.params, &gdb_ctx.num_params)) { +return -1 ; + } + + gdb_ctx.s = s; + cmd->handler (&gdb_ctx, user_ctx); +return 0 ; + } + +return -1 ; +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
Signature · 1 line
2.21.0
PATCH v10 2/20 gdbstub: Implement deatch (D pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 93 +++++++++++++++++++++++++++++++------------------------ 1 file changed, 53 insertions(+), 40 deletions(-)
gdbstub.c +53 -40
@@ -1413,11 +1413,6 @@ static inline int startswith(const char *string, const char *pattern)return !strncmp (string, pattern,strlen (pattern)); } -static int process_string_cmd ( -GDBState *s,void *user_ctx,const char *data, -const GdbCmdParseEntry *cmds,int num_cmds) - __attribute__((unused)); -static int process_string_cmd (GDBState *s,void *user_ctx,const char *data,const GdbCmdParseEntry *cmds,int num_cmds) {
@@ -1463,6 +1458,41 @@ static int process_string_cmd(GDBState *s, void *user_ctx, const char *data,return -1 ; } +static void handle_detach (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +GDBProcess *process; +GDBState *s = gdb_ctx->s; +uint32_t pid =1 ; + +if (s->multiprocess) { +if (!gdb_ctx->num_params) { +put_packet (s,"E22" ); +return ; + } + + pid = gdb_ctx->params[0 ].val_ul; + } + + process =gdb_get_process (s, pid); +gdb_process_breakpoint_remove_all (s, process); + process->attached = false; + +if (pid ==gdb_get_cpu_pid (s, s->c_cpu)) { + s->c_cpu =gdb_first_attached_cpu (s); + } + +if (pid ==gdb_get_cpu_pid (s, s->g_cpu)) { + s->g_cpu =gdb_first_attached_cpu (s); + } + +if (!s->c_cpu) { +/* No more process attached */ + gdb_syscall_mode =GDB_SYS_DISABLED ; +gdb_continue (s); + } +put_packet (s,"OK" ); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1477,6 +1507,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)uint8_t *registers;target_ulong addr, len;GDBThreadIdKind thread_kind; +const GdbCmdParseEntry *cmd_parser =NULL ;trace_gdbstub_io_command (line_buf);
@@ -1577,42 +1608,15 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)error_report ("QEMU: Terminated via GDBstub" );exit (0 );case 'D' : -/* Detach packet */ - pid =1 ; - -if (s->multiprocess) { -unsigned long lpid; -if (*p !=';' ) { -put_packet (s,"E22" ); -break ; - } - -if (qemu_strtoul (p +1 , &p,16 , &lpid)) { -put_packet (s,"E22" ); -break ; - } - - pid = lpid; - } - - process =gdb_get_process (s, pid); -gdb_process_breakpoint_remove_all (s, process); - process->attached = false; - -if (pid ==gdb_get_cpu_pid (s, s->c_cpu)) { - s->c_cpu =gdb_first_attached_cpu (s); - } - -if (pid ==gdb_get_cpu_pid (s, s->g_cpu)) { - s->g_cpu =gdb_first_attached_cpu (s); - } - -if (s->c_cpu ==NULL ) { -/* No more process attached */ - gdb_syscall_mode =GDB_SYS_DISABLED ; -gdb_continue (s); + { +static const GdbCmdParseEntry detach_cmd_desc = { + .handler = handle_detach, + .cmd ="D" , + .cmd_startswith =1 , + .schema ="?.l0" + }; + cmd_parser = &detach_cmd_desc; } -put_packet (s,"OK" );break ;case 's' :if (*p !='\0' ) {
@@ -1985,6 +1989,15 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s, buf);break ; } + +if (cmd_parser) { +/* helper will respond */ +process_string_cmd (s,NULL , line_buf, cmd_parser,1 ); + }else { +/* unknown command, empty respone */ +put_packet (s,"" ); + } +return RS_IDLE ; }
Signature · 1 line
2.21.0
v10 cover gdbstub: Refactor command packets handler
This patch series refactors the old gdbstub command packets handler with a new infrastructure which should ease extending and adding new and missing gdb command packets.
version 10 changes:
- Remove kvm added API as this is not really required and can be accomplished by defining a coprocessor callback with a system specific xml (see: 200bf5b7ffea635079cc05fdfb363372b9544ce7)
- Remove the new QEMU extended commands to read KVM MSRs
- Various fixes from Code Review by Alex Bennee
- Change the QEMU specific command to read physical memory to non-User QEMU
version 9 changes:
- checkpatch fixes
version 8 changes:
- Add new command to display the Supported qemu generic query/sets
- kvm: Add API to read/write a MSR
- Add new commands specific for qemu:
* Command to swap the memory GDB sees to be the physical memory
* Commands to read and write a MSR
version 7 changes:
- Fixed few checkpatch complaints
- Feedback from Alex Bennee
version 4-6 changes:
- mostly feedback from Richard Henderson
version 3 changes
- Split the single patch to many individual patches for easier reviewing
version 2 changes
- Code convention fixes
Jon Doron (20):
gdbstub: Add infrastructure to parse cmd packets
gdbstub: Implement deatch (D pkt) with new infra
gdbstub: Implement thread_alive (T pkt) with new infra
gdbstub: Implement continue (c pkt) with new infra
gdbstub: Implement continue with signal (C pkt) with new infra
gdbstub: Implement set_thread (H pkt) with new infra
gdbstub: Implement breakpoint commands (Z/z pkt) with new infra
gdbstub: Implement set register (P pkt) with new infra
gdbstub: Implement get register (p pkt) with new infra
gdbstub: Implement write memory (M pkt) with new infra
gdbstub: Implement read memory (m pkt) with new infra
gdbstub: Implement write all registers (G pkt) with new infra
gdbstub: Implement read all registers (g pkt) with new infra
gdbstub: Implement file io (F pkt) with new infra
gdbstub: Implement step (s pkt) with new infra
gdbstub: Implement v commands with new infra
gdbstub: Implement generic set/query (Q/q pkt) with new infra
gdbstub: Implement target halted (? pkt) with new infra
gdbstub: Clear unused variables in gdb_handle_packet
gdbstub: Implement qemu physical memory mode
gdbstub.c | 1753 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 1262 insertions(+), 491 deletions(-)
Signature · 1 line
2.21.0
PATCH v10 4/20 gdbstub: Implement continue (c pkt) with new infra
--- gdbstub.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
gdbstub.c +19 -6
@@ -1517,6 +1517,16 @@ static void handle_thread_alive(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s,"OK" ); } +static void handle_continue (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (gdb_ctx->num_params) { +gdb_set_cpu_pc (gdb_ctx->s, gdb_ctx->params[0 ].val_ull); + } + + gdb_ctx->s->signal =0 ; +gdb_continue (gdb_ctx->s); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1553,13 +1563,16 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)gdb_breakpoint_remove_all ();break ;case 'c' : -if (*p !='\0' ) { - addr =strtoull (p, (char **)&p,16 ); -gdb_set_cpu_pc (s, addr); + { +static const GdbCmdParseEntry continue_cmd_desc = { + .handler = handle_continue, + .cmd ="c" , + .cmd_startswith =1 , + .schema ="L0" + }; + cmd_parser = &continue_cmd_desc; } - s->signal =0 ; -gdb_continue (s); -return RS_IDLE ; +break ;case 'C' : s->signal =gdb_signal_to_target (strtoul (p, (char **)&p,16 ));if (s->signal ==-1 )
Signature · 1 line
2.21.0
PATCH v10 3/20 gdbstub: Implement thread_alive (T pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 43 ++++++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 11 deletions(-)
gdbstub.c +32 -11
@@ -1493,6 +1493,30 @@ static void handle_detach(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (s,"OK" ); } +static void handle_thread_alive (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +CPUState *cpu; + +if (!gdb_ctx->num_params) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +if (gdb_ctx->params[0 ].thread_id.kind ==GDB_READ_THREAD_ERR ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + cpu =gdb_get_cpu (gdb_ctx->s, gdb_ctx->params[0 ].thread_id.pid, + gdb_ctx->params[0 ].thread_id.tid); +if (!cpu) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +put_packet (gdb_ctx->s,"OK" ); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1793,17 +1817,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'T' : - thread_kind =read_thread_id (p, &p, &pid, &tid); -if (thread_kind ==GDB_READ_THREAD_ERR ) { -put_packet (s,"E22" ); -break ; - } - cpu =gdb_get_cpu (s, pid, tid); - -if (cpu !=NULL ) { -put_packet (s,"OK" ); - }else { -put_packet (s,"E22" ); + { +static const GdbCmdParseEntry thread_alive_cmd_desc = { + .handler = handle_thread_alive, + .cmd ="T" , + .cmd_startswith =1 , + .schema ="t0" + }; + cmd_parser = &thread_alive_cmd_desc; }break ;case 'q' :
Signature · 1 line
2.21.0
PATCH v10 11/20 gdbstub: Implement read memory (m pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 48 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 32 insertions(+), 16 deletions(-)
gdbstub.c +32 -16
@@ -1713,6 +1713,30 @@ static void handle_write_mem(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s,"OK" ); } +static void handle_read_mem (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (gdb_ctx->num_params !=2 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +/* memtohex() doubles the required space */ +if (gdb_ctx->params[1 ].val_ull >MAX_PACKET_LENGTH /2 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +if (target_memory_rw_debug (gdb_ctx->s->g_cpu, gdb_ctx->params[0 ].val_ull, + gdb_ctx->mem_buf, + gdb_ctx->params[1 ].val_ull, false)) { +put_packet (gdb_ctx->s,"E14" ); +return ; + } + +memtohex (gdb_ctx->str_buf, gdb_ctx->mem_buf, gdb_ctx->params[1 ].val_ull); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1902,22 +1926,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s,"OK" );break ;case 'm' : - addr =strtoull (p, (char **)&p,16 ); -if (*p ==',' ) - p++; - len =strtoull (p,NULL ,16 ); - -/* memtohex() doubles the required space */ -if (len >MAX_PACKET_LENGTH /2 ) { -put_packet (s,"E22" ); -break ; - } - -if (target_memory_rw_debug (s->g_cpu, addr, mem_buf, len, false) !=0 ) { -put_packet (s,"E14" ); - }else { -memtohex (buf, mem_buf, len); -put_packet (s, buf); + { +static const GdbCmdParseEntry read_mem_cmd_desc = { + .handler = handle_read_mem, + .cmd ="m" , + .cmd_startswith =1 , + .schema ="L,L0" + }; + cmd_parser = &read_mem_cmd_desc; }break ;case 'M' :
Signature · 1 line
2.21.0
PATCH v10 6/20 gdbstub: Implement set_thread (H pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 83 +++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 53 insertions(+), 30 deletions(-)
gdbstub.c +53 -30
@@ -1546,6 +1546,51 @@ static void handle_cont_with_sig(GdbCmdContext *gdb_ctx, void *user_ctx)gdb_continue (gdb_ctx->s); } +static void handle_set_thread (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +CPUState *cpu; + +if (gdb_ctx->num_params !=2 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +if (gdb_ctx->params[1 ].thread_id.kind ==GDB_READ_THREAD_ERR ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +if (gdb_ctx->params[1 ].thread_id.kind !=GDB_ONE_THREAD ) { +put_packet (gdb_ctx->s,"OK" ); +return ; + } + + cpu =gdb_get_cpu (gdb_ctx->s, gdb_ctx->params[1 ].thread_id.pid, + gdb_ctx->params[1 ].thread_id.tid); +if (!cpu) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +/* +* Note: This command is deprecated and modern gdb's will be using the +* vCont command instead. +*/ +switch (gdb_ctx->params[0 ].opcode) { +case 'c' : + gdb_ctx->s->c_cpu = cpu; +put_packet (gdb_ctx->s,"OK" ); +break ; +case 'g' : + gdb_ctx->s->g_cpu = cpu; +put_packet (gdb_ctx->s,"OK" ); +break ; +default : +put_packet (gdb_ctx->s,"E22" ); +break ; + } +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1559,7 +1604,6 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)char thread_id[16 ];uint8_t *registers;target_ulong addr, len; -GDBThreadIdKind thread_kind;const GdbCmdParseEntry *cmd_parser =NULL ;trace_gdbstub_io_command (line_buf);
@@ -1822,35 +1866,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s,"E22" );break ;case 'H' : - type = *p++; - - thread_kind =read_thread_id (p, &p, &pid, &tid); -if (thread_kind ==GDB_READ_THREAD_ERR ) { -put_packet (s,"E22" ); -break ; - } - -if (thread_kind !=GDB_ONE_THREAD ) { -put_packet (s,"OK" ); -break ; - } - cpu =gdb_get_cpu (s, pid, tid); -if (cpu ==NULL ) { -put_packet (s,"E22" ); -break ; - } -switch (type) { -case 'c' : - s->c_cpu = cpu; -put_packet (s,"OK" ); -break ; -case 'g' : - s->g_cpu = cpu; -put_packet (s,"OK" ); -break ; -default : -put_packet (s,"E22" ); -break ; + { +static const GdbCmdParseEntry set_thread_cmd_desc = { + .handler = handle_set_thread, + .cmd ="H" , + .cmd_startswith =1 , + .schema ="o.t0" + }; + cmd_parser = &set_thread_cmd_desc; }break ;case 'T' :
Signature · 1 line
2.21.0
PATCH v10 5/20 gdbstub: Implement continue with signal (C pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-)
gdbstub.c +29 -5
@@ -1527,6 +1527,25 @@ static void handle_continue(GdbCmdContext *gdb_ctx, void *user_ctx)gdb_continue (gdb_ctx->s); } +static void handle_cont_with_sig (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +unsigned long signal =0 ; + +/* +* Note: C sig;[addr] is currently unsupported and we simply +* omit the addr parameter +*/ +if (gdb_ctx->num_params) { + signal = gdb_ctx->params[0 ].val_ul; + } + + gdb_ctx->s->signal =gdb_signal_to_target (signal); +if (gdb_ctx->s->signal ==-1 ) { + gdb_ctx->s->signal =0 ; + } +gdb_continue (gdb_ctx->s); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1574,11 +1593,16 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'C' : - s->signal =gdb_signal_to_target (strtoul (p, (char **)&p,16 )); -if (s->signal ==-1 ) - s->signal =0 ; -gdb_continue (s); -return RS_IDLE ; + { +static const GdbCmdParseEntry cont_with_sig_cmd_desc = { + .handler = handle_cont_with_sig, + .cmd ="C" , + .cmd_startswith =1 , + .schema ="l0" + }; + cmd_parser = &cont_with_sig_cmd_desc; + } +break ;case 'v' :if (strncmp (p,"Cont" ,4 ) ==0 ) { p +=4 ;
Signature · 1 line
2.21.0
PATCH v10 16/20 gdbstub: Implement v commands with new infra
In reply to Jon Doron--- gdbstub.c | 170 +++++++++++++++++++++++++++++++++++------------------- 1 file changed, 110 insertions(+), 60 deletions(-)
gdbstub.c +110 -60
@@ -1804,6 +1804,106 @@ static void handle_step(GdbCmdContext *gdb_ctx, void *user_ctx)gdb_continue (gdb_ctx->s); } +static void handle_v_cont_query (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +put_packet (gdb_ctx->s,"vCont;c;C;s;S" ); +} + +static void handle_v_cont (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +int res; + +if (!gdb_ctx->num_params) { +return ; + } + + res =gdb_handle_vcont (gdb_ctx->s, gdb_ctx->params[0 ].data); +if ((res == -EINVAL ) || (res == -ERANGE )) { +put_packet (gdb_ctx->s,"E22" ); + }else if (res) { +put_packet (gdb_ctx->s,"" ); + } +} + +static void handle_v_attach (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +GDBProcess *process; +CPUState *cpu; +char thread_id[16 ]; + +pstrcpy (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"E22" ); +if (!gdb_ctx->num_params) { + goto cleanup; + } + + process =gdb_get_process (gdb_ctx->s, gdb_ctx->params[0 ].val_ul); +if (!process) { + goto cleanup; + } + + cpu =get_first_cpu_in_process (gdb_ctx->s, process); +if (!cpu) { + goto cleanup; + } + + process->attached = true; + gdb_ctx->s->g_cpu = cpu; + gdb_ctx->s->c_cpu = cpu; + +gdb_fmt_thread_id (gdb_ctx->s, cpu, thread_id,sizeof (thread_id)); +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"T%02xthread:%s;" , +GDB_SIGNAL_TRAP , thread_id); +cleanup: +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +static void handle_v_kill (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +/* Kill the target */ +put_packet (gdb_ctx->s,"OK" ); +error_report ("QEMU: Terminated via GDBstub" ); +exit (0 ); +} + +static GdbCmdParseEntry gdb_v_commands_table[] = { +/* Order is important if has same prefix */ + { + .handler = handle_v_cont_query, + .cmd ="Cont?" , + .cmd_startswith =1 + }, + { + .handler = handle_v_cont, + .cmd ="Cont" , + .cmd_startswith =1 , + .schema ="s0" + }, + { + .handler = handle_v_attach, + .cmd ="Attach;" , + .cmd_startswith =1 , + .schema ="l0" + }, + { + .handler = handle_v_kill, + .cmd ="Kill;" , + .cmd_startswith =1 + }, +}; + +static void handle_v_commands (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (!gdb_ctx->num_params) { +return ; + } + +if (process_string_cmd (gdb_ctx->s,NULL , gdb_ctx->params[0 ].data, + gdb_v_commands_table, +ARRAY_SIZE (gdb_v_commands_table))) { +put_packet (gdb_ctx->s,"" ); + } +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1811,7 +1911,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)CPUClass *cc;const char *p;uint32_t pid, tid; -int ch, type, res; +int ch, type;uint8_t mem_buf[MAX_PACKET_LENGTH ];char buf[sizeof (mem_buf) +1 /* trailing NUL */ ];char thread_id[16 ];
@@ -1860,66 +1960,16 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'v' : -if (strncmp (p,"Cont" ,4 ) ==0 ) { - p +=4 ; -if (*p =='?' ) { -put_packet (s,"vCont;c;C;s;S" ); -break ; - } - - res =gdb_handle_vcont (s, p); - -if (res) { -if ((res == -EINVAL ) || (res == -ERANGE )) { -put_packet (s,"E22" ); -break ; - } - goto unknown_command; - } -break ; - }else if (strncmp (p,"Attach;" ,7 ) ==0 ) { -unsigned long pid; - - p +=7 ; - -if (qemu_strtoul (p, &p,16 , &pid)) { -put_packet (s,"E22" ); -break ; - } - - process =gdb_get_process (s, pid); - -if (process ==NULL ) { -put_packet (s,"E22" ); -break ; - } - - cpu =get_first_cpu_in_process (s, process); - -if (cpu ==NULL ) { -/* Refuse to attach an empty process */ -put_packet (s,"E22" ); -break ; - } - - process->attached = true; - - s->g_cpu = cpu; - s->c_cpu = cpu; - -snprintf (buf,sizeof (buf),"T%02xthread:%s;" ,GDB_SIGNAL_TRAP , -gdb_fmt_thread_id (s, cpu, thread_id,sizeof (thread_id))); - -put_packet (s, buf); -break ; - }else if (strncmp (p,"Kill;" ,5 ) ==0 ) { -/* Kill the target */ -put_packet (s,"OK" ); -error_report ("QEMU: Terminated via GDBstub" ); -exit (0 ); - }else { - goto unknown_command; + { +static const GdbCmdParseEntry v_cmd_desc = { + .handler = handle_v_commands, + .cmd ="v" , + .cmd_startswith =1 , + .schema ="s0" + }; + cmd_parser = &v_cmd_desc; } +break ;case 'k' :/* Kill the target */ error_report ("QEMU: Terminated via GDBstub" );
Signature · 1 line
2.21.0
PATCH v10 14/20 gdbstub: Implement file io (F pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 48 ++++++++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 22 deletions(-)
gdbstub.c +26 -22
@@ -1775,6 +1775,25 @@ static void handle_read_all_regs(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s, gdb_ctx->str_buf); } +static void handle_file_io (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (gdb_ctx->num_params >=2 && gdb_ctx->s->current_syscall_cb) { +target_ulong ret, err; + + ret = (target_ulong )gdb_ctx->params[0 ].val_ull; + err = (target_ulong )gdb_ctx->params[1 ].val_ull; + gdb_ctx->s->current_syscall_cb (gdb_ctx->s->c_cpu, ret, err); + gdb_ctx->s->current_syscall_cb =NULL ; + } + +if (gdb_ctx->num_params >=3 && gdb_ctx->params[2 ].opcode == (uint8_t )'C' ) { +put_packet (gdb_ctx->s,"T02" ); +return ; + } + +gdb_continue (gdb_ctx->s); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1916,28 +1935,13 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)return RS_IDLE ;case 'F' : { -target_ulong ret; -target_ulong err; - - ret =strtoull (p, (char **)&p,16 ); -if (*p ==',' ) { - p++; - err =strtoull (p, (char **)&p,16 ); - }else { - err =0 ; - } -if (*p ==',' ) - p++; - type = *p; -if (s->current_syscall_cb) { - s->current_syscall_cb (s->c_cpu, ret, err); - s->current_syscall_cb =NULL ; - } -if (type =='C' ) { -put_packet (s,"T02" ); - }else { -gdb_continue (s); - } +static const GdbCmdParseEntry file_io_cmd_desc = { + .handler = handle_file_io, + .cmd ="F" , + .cmd_startswith =1 , + .schema ="L,L,o0" + }; + cmd_parser = &file_io_cmd_desc; }break ;case 'g' :
Signature · 1 line
2.21.0
PATCH v10 7/20 gdbstub: Implement breakpoint commands (Z/z pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 84 +++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 66 insertions(+), 18 deletions(-)
gdbstub.c +66 -18
@@ -950,7 +950,7 @@ static inline int xlat_gdb_type(CPUState *cpu, int gdbtype) }#endif -static int gdb_breakpoint_insert (target_ulong addr,target_ulong len,int type) +static int gdb_breakpoint_insert (int type,target_ulong addr,target_ulong len) {CPUState *cpu;int err =0 ;
@@ -1591,6 +1591,52 @@ static void handle_set_thread(GdbCmdContext *gdb_ctx, void *user_ctx) } } +static void handle_insert_bp (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +int res; + +if (gdb_ctx->num_params !=3 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + res =gdb_breakpoint_insert (gdb_ctx->params[0 ].val_ul, + gdb_ctx->params[1 ].val_ull, + gdb_ctx->params[2 ].val_ull); +if (res >=0 ) { +put_packet (gdb_ctx->s,"OK" ); +return ; + }else if (res == -ENOSYS ) { +put_packet (gdb_ctx->s,"" ); +return ; + } + +put_packet (gdb_ctx->s,"E22" ); +} + +static void handle_remove_bp (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +int res; + +if (gdb_ctx->num_params !=3 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + res =gdb_breakpoint_remove (gdb_ctx->params[0 ].val_ul, + gdb_ctx->params[1 ].val_ull, + gdb_ctx->params[2 ].val_ull); +if (res >=0 ) { +put_packet (gdb_ctx->s,"OK" ); +return ; + }else if (res == -ENOSYS ) { +put_packet (gdb_ctx->s,"" ); +return ; + } + +put_packet (gdb_ctx->s,"E22" ); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1846,24 +1892,26 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s,"OK" );break ;case 'Z' : + { +static const GdbCmdParseEntry insert_bp_cmd_desc = { + .handler = handle_insert_bp, + .cmd ="Z" , + .cmd_startswith =1 , + .schema ="l?L?L0" + }; + cmd_parser = &insert_bp_cmd_desc; + } +break ;case 'z' : - type =strtoul (p, (char **)&p,16 ); -if (*p ==',' ) - p++; - addr =strtoull (p, (char **)&p,16 ); -if (*p ==',' ) - p++; - len =strtoull (p, (char **)&p,16 ); -if (ch =='Z' ) - res =gdb_breakpoint_insert (addr, len, type); -else - res =gdb_breakpoint_remove (addr, len, type); -if (res >=0 ) -put_packet (s,"OK" ); -else if (res == -ENOSYS ) -put_packet (s,"" ); -else -put_packet (s,"E22" ); + { +static const GdbCmdParseEntry remove_bp_cmd_desc = { + .handler = handle_remove_bp, + .cmd ="z" , + .cmd_startswith =1 , + .schema ="l?L?L0" + }; + cmd_parser = &remove_bp_cmd_desc; + }break ;case 'H' : {
Signature · 1 line
2.21.0
PATCH v10 13/20 gdbstub: Implement read all registers (g pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-)
gdbstub.c +23 -8
@@ -1760,6 +1760,21 @@ static void handle_write_all_regs(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s,"OK" ); } +static void handle_read_all_regs (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +target_ulong addr, len; + +cpu_synchronize_state (gdb_ctx->s->g_cpu); + len =0 ; +for (addr =0 ; addr < gdb_ctx->s->g_cpu->gdb_num_g_regs; addr++) { + len +=gdb_read_register (gdb_ctx->s->g_cpu, gdb_ctx->mem_buf + len, + addr); + } + +memtohex (gdb_ctx->str_buf, gdb_ctx->mem_buf, len); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1767,7 +1782,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)CPUClass *cc;const char *p;uint32_t pid, tid; -int ch, reg_size, type, res; +int ch, type, res;uint8_t mem_buf[MAX_PACKET_LENGTH ];char buf[sizeof (mem_buf) +1 /* trailing NUL */ ];char thread_id[16 ];
@@ -1926,14 +1941,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'g' : -cpu_synchronize_state (s->g_cpu); - len =0 ; -for (addr =0 ; addr < s->g_cpu->gdb_num_g_regs; addr++) { - reg_size =gdb_read_register (s->g_cpu, mem_buf + len, addr); - len += reg_size; + { +static const GdbCmdParseEntry read_all_regs_cmd_desc = { + .handler = handle_read_all_regs, + .cmd ="g" , + .cmd_startswith =1 + }; + cmd_parser = &read_all_regs_cmd_desc; } -memtohex (buf, mem_buf, len); -put_packet (s, buf);break ;case 'G' : {
Signature · 1 line
2.21.0
PATCH v10 18/20 gdbstub: Implement target halted (? pkt) with new infra
In reply to Jon DoronNote: The user-mode thread-id has been correctly reported since bd88c780e6
--- gdbstub.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-)
gdbstub.c +25 -10
@@ -2251,13 +2251,29 @@ static void handle_gen_set(GdbCmdContext *gdb_ctx, void *user_ctx) } } +static void handle_target_halt (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +char thread_id[16 ]; + +gdb_fmt_thread_id (gdb_ctx->s, gdb_ctx->s->c_cpu, thread_id, +sizeof (thread_id)); +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"T%02xthread:%s;" , +GDB_SIGNAL_TRAP , thread_id); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +/* +* Remove all the breakpoints when this query is issued, +* because gdb is doing an initial connect and the state +* should be cleaned up. +*/ +gdb_breakpoint_remove_all (); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {const char *p;int ch;uint8_t mem_buf[MAX_PACKET_LENGTH ];char buf[sizeof (mem_buf) +1 /* trailing NUL */ ]; -char thread_id[16 ];const GdbCmdParseEntry *cmd_parser =NULL ;trace_gdbstub_io_command (line_buf);
@@ -2269,15 +2285,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s,"OK" );break ;case '?' : -/* TODO: Make this return the correct value for user-mode. */ -snprintf (buf,sizeof (buf),"T%02xthread:%s;" ,GDB_SIGNAL_TRAP , -gdb_fmt_thread_id (s, s->c_cpu, thread_id,sizeof (thread_id))); -put_packet (s, buf); -/* Remove all the breakpoints when this query is issued, -* because gdb is doing and initial connect and the state -* should be cleaned up. -*/ -gdb_breakpoint_remove_all (); + { +static const GdbCmdParseEntry target_halted_cmd_desc = { + .handler = handle_target_halt, + .cmd ="?" , + .cmd_startswith =1 + }; + cmd_parser = &target_halted_cmd_desc; + }break ;case 'c' : {
Signature · 1 line
2.21.0
PATCH v10 8/20 gdbstub: Implement set register (P pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 39 ++++++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 9 deletions(-)
gdbstub.c +30 -9
@@ -1637,6 +1637,27 @@ static void handle_remove_bp(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s,"E22" ); } +static void handle_set_reg (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +int reg_size; + +if (!gdb_has_xml) { +put_packet (gdb_ctx->s,"E00" ); +return ; + } + +if (gdb_ctx->num_params !=2 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + reg_size =strlen (gdb_ctx->params[1 ].data) /2 ; +hextomem (gdb_ctx->mem_buf, gdb_ctx->params[1 ].data, reg_size); +gdb_write_register (gdb_ctx->s->g_cpu, gdb_ctx->mem_buf, + gdb_ctx->params[0 ].val_ull); +put_packet (gdb_ctx->s,"OK" ); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1881,15 +1902,15 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'P' : -if (!gdb_has_xml) - goto unknown_command; - addr =strtoull (p, (char **)&p,16 ); -if (*p =='=' ) - p++; - reg_size =strlen (p) /2 ; -hextomem (mem_buf, p, reg_size); -gdb_write_register (s->g_cpu, mem_buf, addr); -put_packet (s,"OK" ); + { +static const GdbCmdParseEntry set_reg_cmd_desc = { + .handler = handle_set_reg, + .cmd ="P" , + .cmd_startswith =1 , + .schema ="L?s0" + }; + cmd_parser = &set_reg_cmd_desc; + }break ;case 'Z' : {
Signature · 1 line
2.21.0
PATCH v10 19/20 gdbstub: Clear unused variables in gdb_handle_packet
In reply to Jon Doron--- gdbstub.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
gdbstub.c +2 -9
@@ -2270,17 +2270,11 @@ static void handle_target_halt(GdbCmdContext *gdb_ctx, void *user_ctx)static int gdb_handle_packet (GDBState *s,const char *line_buf) { -const char *p; -int ch; -uint8_t mem_buf[MAX_PACKET_LENGTH ]; -char buf[sizeof (mem_buf) +1 /* trailing NUL */ ];const GdbCmdParseEntry *cmd_parser =NULL ;trace_gdbstub_io_command (line_buf); - p = line_buf; - ch = *p++; -switch (ch) { +switch (line_buf[0 ]) {case '!' :put_packet (s,"OK" );break ;
@@ -2497,8 +2491,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)break ;default :/* put empty packet */ - buf[0 ] ='\0' ; -put_packet (s, buf); +put_packet (s,"" );break ; }
Signature · 1 line
2.21.0
PATCH v10 9/20 gdbstub: Implement get register (p pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 50 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 12 deletions(-)
gdbstub.c +38 -12
@@ -1658,6 +1658,36 @@ static void handle_set_reg(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s,"OK" ); } +static void handle_get_reg (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +int reg_size; + +/* +* Older gdb are really dumb, and don't use 'g' if 'p' is avaialable. +* This works, but can be very slow. Anything new enough to +* understand XML also knows how to use this properly. +*/ +if (!gdb_has_xml) { +put_packet (gdb_ctx->s,"" ); +return ; + } + +if (!gdb_ctx->num_params) { +put_packet (gdb_ctx->s,"E14" ); +return ; + } + + reg_size =gdb_read_register (gdb_ctx->s->g_cpu, gdb_ctx->mem_buf, + gdb_ctx->params[0 ].val_ull); +if (!reg_size) { +put_packet (gdb_ctx->s,"E14" ); +return ; + } + +memtohex (gdb_ctx->str_buf, gdb_ctx->mem_buf, reg_size); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1887,18 +1917,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'p' : -/* Older gdb are really dumb, and don't use 'g' if 'p' is avaialable. -This works, but can be very slow. Anything new enough to -understand XML also knows how to use this properly. */ -if (!gdb_has_xml) - goto unknown_command; - addr =strtoull (p, (char **)&p,16 ); - reg_size =gdb_read_register (s->g_cpu, mem_buf, addr); -if (reg_size) { -memtohex (buf, mem_buf, reg_size); -put_packet (s, buf); - }else { -put_packet (s,"E14" ); + { +static const GdbCmdParseEntry get_reg_cmd_desc = { + .handler = handle_get_reg, + .cmd ="p" , + .cmd_startswith =1 , + .schema ="L0" + }; + cmd_parser = &get_reg_cmd_desc; }break ;case 'P' :
Signature · 1 line
2.21.0
PATCH v10 20/20 gdbstub: Implement qemu physical memory mode
In reply to Jon DoronAdd a new query/set which changes the memory GDB sees to physical memory only.
gdb> maint packet qqemu.PhyMemMode
will reply the current phy_mem_mode state (1 for enabled, 0 for disabled) gdb> maint packet Qqemu.PhyMemMode:1
Will make GDB read/write only to physical memory, set to 0 to disable
--- gdbstub.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 2 deletions(-)
gdbstub.c +60 -2
@@ -46,11 +46,27 @@#define GDB_ATTACHED "1"#endif +#ifndef CONFIG_USER_ONLY +static int phy_memory_mode; +#endif +static inline int target_memory_rw_debug (CPUState *cpu,target_ulong addr,uint8_t *buf,int len,bool is_write) { -CPUClass *cc =CPU_GET_CLASS (cpu); +CPUClass *cc; +#ifndef CONFIG_USER_ONLY +if (phy_memory_mode) { +if (is_write) { +cpu_physical_memory_write (addr, buf, len); + }else { +cpu_physical_memory_read (addr, buf, len); + } +return 0 ; + } +#endif + + cc =CPU_GET_CLASS (cpu);if (cc->memory_rw_debug) {return cc->memory_rw_debug (cpu, addr, buf, len, is_write); }
@@ -2118,8 +2134,36 @@ static void handle_query_attached(GdbCmdContext *gdb_ctx, void *user_ctx)static void handle_query_qemu_supported (GdbCmdContext *gdb_ctx,void *user_ctx) { -put_packet (gdb_ctx->s,"sstepbits;sstep" ); +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"sstepbits;sstep" ); +#ifndef CONFIG_USER_ONLY +pstrcat (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),";PhyMemMode" ); +#endif +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +#ifndef CONFIG_USER_ONLY +static void handle_query_qemu_phy_mem_mode (GdbCmdContext *gdb_ctx, +void *user_ctx) +{ +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"%d" , phy_memory_mode); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +static void handle_set_qemu_phy_mem_mode (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (!gdb_ctx->num_params) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +if (!gdb_ctx->params[0 ].val_ul) { + phy_memory_mode =0 ; + }else { + phy_memory_mode =1 ; + } +put_packet (gdb_ctx->s,"OK" ); } +#endif static GdbCmdParseEntry gdb_gen_query_set_common_table[] = {/* Order is important if has same prefix */
@@ -2201,6 +2245,12 @@ static GdbCmdParseEntry gdb_gen_query_table[] = { .handler = handle_query_qemu_supported, .cmd = "qemu.Supported", }, +#ifndef CONFIG_USER_ONLY + { + .handler = handle_query_qemu_phy_mem_mode, + .cmd = "qemu.PhyMemMode", + }, +#endif }; static GdbCmdParseEntry gdb_gen_set_table[] = {
@@ -2211,6 +2261,14 @@ static GdbCmdParseEntry gdb_gen_set_table[] = { .cmd_startswith = 1, .schema = "l0" }, +#ifndef CONFIG_USER_ONLY + { + .handler = handle_set_qemu_phy_mem_mode, + .cmd = "qemu.PhyMemMode:", + .cmd_startswith = 1, + .schema = "l0" + }, +#endif };static void handle_gen_query (GdbCmdContext *gdb_ctx,void *user_ctx)
Signature · 1 line
2.21.0
PATCH v10 10/20 gdbstub: Implement write memory (M pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 51 +++++++++++++++++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 18 deletions(-)
gdbstub.c +33 -18
@@ -1688,6 +1688,31 @@ static void handle_get_reg(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s, gdb_ctx->str_buf); } +static void handle_write_mem (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (gdb_ctx->num_params !=3 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +/* hextomem() reads 2*len bytes */ +if (gdb_ctx->params[1 ].val_ull >strlen (gdb_ctx->params[2 ].data) /2 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + +hextomem (gdb_ctx->mem_buf, gdb_ctx->params[2 ].data, + gdb_ctx->params[1 ].val_ull); +if (target_memory_rw_debug (gdb_ctx->s->g_cpu, gdb_ctx->params[0 ].val_ull, + gdb_ctx->mem_buf, + gdb_ctx->params[1 ].val_ull, true)) { +put_packet (gdb_ctx->s,"E14" ); +return ; + } + +put_packet (gdb_ctx->s,"OK" ); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1896,24 +1921,14 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'M' : - addr =strtoull (p, (char **)&p,16 ); -if (*p ==',' ) - p++; - len =strtoull (p, (char **)&p,16 ); -if (*p ==':' ) - p++; - -/* hextomem() reads 2*len bytes */ -if (len >strlen (p) /2 ) { -put_packet (s,"E22" ); -break ; - } -hextomem (mem_buf, p, len); -if (target_memory_rw_debug (s->g_cpu, addr, mem_buf, len, - true) !=0 ) { -put_packet (s,"E14" ); - }else { -put_packet (s,"OK" ); + { +static const GdbCmdParseEntry write_mem_cmd_desc = { + .handler = handle_write_mem, + .cmd ="M" , + .cmd_startswith =1 , + .schema ="L,L:s0" + }; + cmd_parser = &write_mem_cmd_desc; }break ;case 'p' :
Signature · 1 line
2.21.0
PATCH v10 12/20 gdbstub: Implement write all registers (G pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 41 +++++++++++++++++++++++++++++++---------- 1 file changed, 31 insertions(+), 10 deletions(-)
gdbstub.c +31 -10
@@ -1737,6 +1737,29 @@ static void handle_read_mem(GdbCmdContext *gdb_ctx, void *user_ctx)put_packet (gdb_ctx->s, gdb_ctx->str_buf); } +static void handle_write_all_regs (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +target_ulong addr, len; +uint8_t *registers; +int reg_size; + +if (!gdb_ctx->num_params) { +return ; + } + +cpu_synchronize_state (gdb_ctx->s->g_cpu); + registers = gdb_ctx->mem_buf; + len =strlen (gdb_ctx->params[0 ].data) /2 ; +hextomem (registers, gdb_ctx->params[0 ].data, len); +for (addr =0 ; addr < gdb_ctx->s->g_cpu->gdb_num_g_regs && len >0 ; + addr++) { + reg_size =gdb_write_register (gdb_ctx->s->g_cpu, registers, addr); + len -= reg_size; + registers += reg_size; + } +put_packet (gdb_ctx->s,"OK" ); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1748,7 +1771,6 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)uint8_t mem_buf[MAX_PACKET_LENGTH ];char buf[sizeof (mem_buf) +1 /* trailing NUL */ ];char thread_id[16 ]; -uint8_t *registers;target_ulong addr, len;const GdbCmdParseEntry *cmd_parser =NULL ;
@@ -1914,16 +1936,15 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)put_packet (s, buf);break ;case 'G' : -cpu_synchronize_state (s->g_cpu); - registers = mem_buf; - len =strlen (p) /2 ; -hextomem ((uint8_t *)registers, p, len); -for (addr =0 ; addr < s->g_cpu->gdb_num_g_regs && len >0 ; addr++) { - reg_size =gdb_write_register (s->g_cpu, registers, addr); - len -= reg_size; - registers += reg_size; + { +static const GdbCmdParseEntry write_all_regs_cmd_desc = { + .handler = handle_write_all_regs, + .cmd ="G" , + .cmd_startswith =1 , + .schema ="s0" + }; + cmd_parser = &write_all_regs_cmd_desc; } -put_packet (s,"OK" );break ;case 'm' : {
Signature · 1 line
2.21.0
PATCH v10 15/20 gdbstub: Implement step (s pkt) with new infra
In reply to Jon Doron--- gdbstub.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
gdbstub.c +19 -6
@@ -1794,6 +1794,16 @@ static void handle_file_io(GdbCmdContext *gdb_ctx, void *user_ctx)gdb_continue (gdb_ctx->s); } +static void handle_step (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (gdb_ctx->num_params) { +gdb_set_cpu_pc (gdb_ctx->s, (target_ulong )gdb_ctx->params[0 ].val_ull); + } + +cpu_single_step (gdb_ctx->s->c_cpu, sstep_flags); +gdb_continue (gdb_ctx->s); +} +static int gdb_handle_packet (GDBState *s,const char *line_buf) {CPUState *cpu;
@@ -1926,13 +1936,16 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 's' : -if (*p !='\0' ) { - addr =strtoull (p, (char **)&p,16 ); -gdb_set_cpu_pc (s, addr); + { +static const GdbCmdParseEntry step_cmd_desc = { + .handler = handle_step, + .cmd ="s" , + .cmd_startswith =1 , + .schema ="L0" + }; + cmd_parser = &step_cmd_desc; } -cpu_single_step (s->c_cpu, sstep_flags); -gdb_continue (s); -return RS_IDLE ; +break ;case 'F' : {static const GdbCmdParseEntry file_io_cmd_desc = {
Signature · 1 line
2.21.0
PATCH v10 17/20 gdbstub: Implement generic set/query (Q/q pkt) with new infra
In reply to Jon DoronThe generic set/query packets contains implementation for varioius sub-commands which are required for GDB and also additional commands which are QEMU specific.
To see which QEMU specific commands are available use the command gdb> maintenance packet qqemu.Supported
Currently the only implemented QEMU specific command is the command that sets the single step behavior.
gdb> maintenance packet qqemu.sstepbits
Will display the MASK bits used to control the single stepping.
gdb> maintenance packet qqemu.sstep
Will display the current value of the mask used when single stepping.
gdb> maintenance packet Qqemu.sstep:HEX_VALUE
Will change the single step mask.
--- gdbstub.c | 559 ++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 373 insertions(+), 186 deletions(-)
gdbstub.c +373 -186
@@ -1130,14 +1130,6 @@ static GDBThreadIdKind read_thread_id(const char *buf, const char **end_buf,return GDB_ONE_THREAD ; } -static int is_query_packet (const char *p,const char *query,char separator) -{ -unsigned int query_len =strlen (query); - -return strncmp (p, query, query_len) ==0 && - (p[query_len] =='\0' || p[query_len] == separator); -} -/** * gdb_handle_vcont - Parses and handles a vCont packet. * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there is
@@ -1904,18 +1896,368 @@ static void handle_v_commands(GdbCmdContext *gdb_ctx, void *user_ctx) } } -static int gdb_handle_packet (GDBState *s,const char *line_buf) +static void handle_query_qemu_sstepbits (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf), +"ENABLE=%x,NOIRQ=%x,NOTIMER=%x" ,SSTEP_ENABLE , +SSTEP_NOIRQ ,SSTEP_NOTIMER ); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +static void handle_set_qemu_sstep (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (!gdb_ctx->num_params) { +return ; + } + + sstep_flags = gdb_ctx->params[0 ].val_ul; +put_packet (gdb_ctx->s,"OK" ); +} + +static void handle_query_qemu_sstep (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"0x%x" , sstep_flags); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +static void handle_query_curr_tid (GdbCmdContext *gdb_ctx,void *user_ctx) {CPUState *cpu;GDBProcess *process; +char thread_id[16 ]; + +/* +* "Current thread" remains vague in the spec, so always return +* the first thread of the current process (gdb returns the +* first thread). +*/ + process =gdb_get_cpu_process (gdb_ctx->s, gdb_ctx->s->g_cpu); + cpu =get_first_cpu_in_process (gdb_ctx->s, process); +gdb_fmt_thread_id (gdb_ctx->s, cpu, thread_id,sizeof (thread_id)); +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"QC%s" , thread_id); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +static void handle_query_threads (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +char thread_id[16 ]; + +if (!gdb_ctx->s->query_cpu) { +put_packet (gdb_ctx->s,"l" ); +return ; + } + +gdb_fmt_thread_id (gdb_ctx->s, gdb_ctx->s->query_cpu, thread_id, +sizeof (thread_id)); +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"m%s" , thread_id); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); + gdb_ctx->s->query_cpu = +gdb_next_attached_cpu (gdb_ctx->s, gdb_ctx->s->query_cpu); +} + +static void handle_query_first_threads (GdbCmdContext *gdb_ctx,void *user_ctx) +{ + gdb_ctx->s->query_cpu =gdb_first_attached_cpu (gdb_ctx->s); +handle_query_threads (gdb_ctx, user_ctx); +} + +static void handle_query_thread_extra (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +CPUState *cpu; +int len; + +if (!gdb_ctx->num_params || + gdb_ctx->params[0 ].thread_id.kind ==GDB_READ_THREAD_ERR ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + cpu =gdb_get_cpu (gdb_ctx->s, gdb_ctx->params[0 ].thread_id.pid, + gdb_ctx->params[0 ].thread_id.tid); +if (!cpu) { +return ; + } + +cpu_synchronize_state (cpu); + +if (gdb_ctx->s->multiprocess && (gdb_ctx->s->process_num >1 )) { +/* Print the CPU model and name in multiprocess mode */ +ObjectClass *oc =object_get_class (OBJECT (cpu)); +const char *cpu_model =object_class_get_name (oc); +char *cpu_name =object_get_canonical_path_component (OBJECT (cpu)); + len =snprintf ((char *)gdb_ctx->mem_buf,sizeof (gdb_ctx->str_buf) /2 , +"%s %s [%s]" , cpu_model, cpu_name, + cpu->halted ?"halted " :"running" ); +g_free (cpu_name); + }else { +/* memtohex() doubles the required space */ + len =snprintf ((char *)gdb_ctx->mem_buf,sizeof (gdb_ctx->str_buf) /2 , +"CPU#%d [%s]" , cpu->cpu_index, + cpu->halted ?"halted " :"running" ); + } +trace_gdbstub_op_extra_info ((char *)gdb_ctx->mem_buf); +memtohex (gdb_ctx->str_buf, gdb_ctx->mem_buf, len); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +#ifdef CONFIG_USER_ONLY +static void handle_query_offsets (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +TaskState *ts; + + ts = gdb_ctx->s->c_cpu->opaque; +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf), +"Text=" TARGET_ABI_FMT_lx";Data=" TARGET_ABI_FMT_lx +";Bss=" TARGET_ABI_FMT_lx, + ts->info->code_offset, + ts->info->data_offset, + ts->info->data_offset); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} +#else +static void handle_query_rcmd (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +int len; + +if (!gdb_ctx->num_params) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + len =strlen (gdb_ctx->params[0 ].data); +if (len %2 ) { +put_packet (gdb_ctx->s,"E01" ); +return ; + } + + len = len /2 ; +hextomem (gdb_ctx->mem_buf, gdb_ctx->params[0 ].data, len); + gdb_ctx->mem_buf[len++] =0 ; +qemu_chr_be_write (gdb_ctx->s->mon_chr, gdb_ctx->mem_buf, len); +put_packet (gdb_ctx->s,"OK" ); + +} +#endif + +static void handle_query_supported (GdbCmdContext *gdb_ctx,void *user_ctx) +{CPUClass *cc; + +snprintf (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),"PacketSize=%x" , +MAX_PACKET_LENGTH ); + cc =CPU_GET_CLASS (first_cpu); +if (cc->gdb_core_xml_file) { +pstrcat (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf), +";qXfer:features:read+" ); + } + +if (gdb_ctx->num_params && +strstr (gdb_ctx->params[0 ].data,"multiprocess+" )) { + gdb_ctx->s->multiprocess = true; + } + +pstrcat (gdb_ctx->str_buf,sizeof (gdb_ctx->str_buf),";multiprocess+" ); +put_packet (gdb_ctx->s, gdb_ctx->str_buf); +} + +static void handle_query_xfer_features (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +GDBProcess *process; +CPUClass *cc; +unsigned long len, total_len, addr; +const char *xml;const char *p; -uint32_t pid, tid; -int ch, type; + +if (gdb_ctx->num_params <3 ) { +put_packet (gdb_ctx->s,"E22" ); +return ; + } + + process =gdb_get_cpu_process (gdb_ctx->s, gdb_ctx->s->g_cpu); + cc =CPU_GET_CLASS (gdb_ctx->s->g_cpu); +if (!cc->gdb_core_xml_file) { +put_packet (gdb_ctx->s,"" ); +return ; + } + + gdb_has_xml = true; + p = gdb_ctx->params[0 ].data; + xml =get_feature_xml (gdb_ctx->s, p, &p, process); +if (!xml) { +put_packet (gdb_ctx->s,"E00" ); +return ; + } + + addr = gdb_ctx->params[1 ].val_ul; + len = gdb_ctx->params[2 ].val_ul; + total_len =strlen (xml); +if (addr > total_len) { +put_packet (gdb_ctx->s,"E00" ); +return ; + } + +if (len > (MAX_PACKET_LENGTH -5 ) /2 ) { + len = (MAX_PACKET_LENGTH -5 ) /2 ; + } + +if (len < total_len - addr) { + gdb_ctx->str_buf[0 ] ='m' ; + len =memtox (gdb_ctx->str_buf +1 , xml + addr, len); + }else { + gdb_ctx->str_buf[0 ] ='l' ; + len =memtox (gdb_ctx->str_buf +1 , xml + addr, total_len - addr); + } + +put_packet_binary (gdb_ctx->s, gdb_ctx->str_buf, len +1 , true); +} + +static void handle_query_attached (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +put_packet (gdb_ctx->s,GDB_ATTACHED ); +} + +static void handle_query_qemu_supported (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +put_packet (gdb_ctx->s,"sstepbits;sstep" ); +} + +static GdbCmdParseEntry gdb_gen_query_set_common_table[] = { +/* Order is important if has same prefix */ + { + .handler = handle_query_qemu_sstepbits, + .cmd ="qemu.sstepbits" , + }, + { + .handler = handle_query_qemu_sstep, + .cmd ="qemu.sstep" , + }, + { + .handler = handle_set_qemu_sstep, + .cmd ="qemu.sstep=" , + .cmd_startswith =1 , + .schema ="l0" + }, +}; + +static GdbCmdParseEntry gdb_gen_query_table[] = { + { + .handler = handle_query_curr_tid, + .cmd ="C" , + }, + { + .handler = handle_query_threads, + .cmd ="sThreadInfo" , + }, + { + .handler = handle_query_first_threads, + .cmd ="fThreadInfo" , + }, + { + .handler = handle_query_thread_extra, + .cmd ="ThreadExtraInfo," , + .cmd_startswith =1 , + .schema ="t0" + }, +#ifdef CONFIG_USER_ONLY + { + .handler = handle_query_offsets, + .cmd ="Offsets" , + }, +#else + { + .handler = handle_query_rcmd, + .cmd ="Rcmd," , + .cmd_startswith =1 , + .schema ="s0" + }, +#endif + { + .handler = handle_query_supported, + .cmd ="Supported:" , + .cmd_startswith =1 , + .schema ="s0" + }, + { + .handler = handle_query_supported, + .cmd ="Supported" , + .schema ="s0" + }, + { + .handler = handle_query_xfer_features, + .cmd ="Xfer:features:read:" , + .cmd_startswith =1 , + .schema ="s:l,l0" + }, + { + .handler = handle_query_attached, + .cmd ="Attached:" , + .cmd_startswith =1 + }, + { + .handler = handle_query_attached, + .cmd ="Attached" , + }, + { + .handler = handle_query_qemu_supported, + .cmd ="qemu.Supported" , + }, +}; + +static GdbCmdParseEntry gdb_gen_set_table[] = { +/* Order is important if has same prefix */ + { + .handler = handle_set_qemu_sstep, + .cmd ="qemu.sstep:" , + .cmd_startswith =1 , + .schema ="l0" + }, +}; + +static void handle_gen_query (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (!gdb_ctx->num_params) { +return ; + } + +if (!process_string_cmd (gdb_ctx->s,NULL , gdb_ctx->params[0 ].data, + gdb_gen_query_set_common_table, +ARRAY_SIZE (gdb_gen_query_set_common_table))) { +return ; + } + +if (process_string_cmd (gdb_ctx->s,NULL , gdb_ctx->params[0 ].data, + gdb_gen_query_table, +ARRAY_SIZE (gdb_gen_query_table))) { +put_packet (gdb_ctx->s,"" ); + } +} + +static void handle_gen_set (GdbCmdContext *gdb_ctx,void *user_ctx) +{ +if (!gdb_ctx->num_params) { +return ; + } + +if (!process_string_cmd (gdb_ctx->s,NULL , gdb_ctx->params[0 ].data, + gdb_gen_query_set_common_table, +ARRAY_SIZE (gdb_gen_query_set_common_table))) { +return ; + } + +if (process_string_cmd (gdb_ctx->s,NULL , gdb_ctx->params[0 ].data, + gdb_gen_set_table, +ARRAY_SIZE (gdb_gen_set_table))) { +put_packet (gdb_ctx->s,"" ); + } +} + +static int gdb_handle_packet (GDBState *s,const char *line_buf) +{ +const char *p; +int ch;uint8_t mem_buf[MAX_PACKET_LENGTH ];char buf[sizeof (mem_buf) +1 /* trailing NUL */ ];char thread_id[16 ]; -target_ulong addr, len;const GdbCmdParseEntry *cmd_parser =NULL ;trace_gdbstub_io_command (line_buf);
@@ -2117,183 +2459,28 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) }break ;case 'q' : -case 'Q' : -/* parse any 'q' packets here */ -if (!strcmp (p,"qemu.sstepbits" )) { -/* Query Breakpoint bit definitions */ -snprintf (buf,sizeof (buf),"ENABLE=%x,NOIRQ=%x,NOTIMER=%x" , -SSTEP_ENABLE , -SSTEP_NOIRQ , -SSTEP_NOTIMER ); -put_packet (s, buf); -break ; - }else if (is_query_packet (p,"qemu.sstep" ,'=' )) { -/* Display or change the sstep_flags */ - p +=10 ; -if (*p !='=' ) { -/* Display current setting */ -snprintf (buf,sizeof (buf),"0x%x" , sstep_flags); -put_packet (s, buf); -break ; - } - p++; - type =strtoul (p, (char **)&p,16 ); - sstep_flags = type; -put_packet (s,"OK" ); -break ; - }else if (strcmp (p,"C" ) ==0 ) { -/* -* "Current thread" remains vague in the spec, so always return -* the first thread of the current process (gdb returns the -* first thread). -*/ - cpu =get_first_cpu_in_process (s,gdb_get_cpu_process (s, s->g_cpu)); -snprintf (buf,sizeof (buf),"QC%s" , -gdb_fmt_thread_id (s, cpu, thread_id,sizeof (thread_id))); -put_packet (s, buf); -break ; - }else if (strcmp (p,"fThreadInfo" ) ==0 ) { - s->query_cpu =gdb_first_attached_cpu (s); - goto report_cpuinfo; - }else if (strcmp (p,"sThreadInfo" ) ==0 ) { - report_cpuinfo: -if (s->query_cpu) { -snprintf (buf,sizeof (buf),"m%s" , -gdb_fmt_thread_id (s, s->query_cpu, - thread_id,sizeof (thread_id))); -put_packet (s, buf); - s->query_cpu =gdb_next_attached_cpu (s, s->query_cpu); - }else -put_packet (s,"l" ); -break ; - }else if (strncmp (p,"ThreadExtraInfo," ,16 ) ==0 ) { -if (read_thread_id (p +16 , &p, &pid, &tid) ==GDB_READ_THREAD_ERR ) { -put_packet (s,"E22" ); -break ; - } - cpu =gdb_get_cpu (s, pid, tid); -if (cpu !=NULL ) { -cpu_synchronize_state (cpu); - -if (s->multiprocess && (s->process_num >1 )) { -/* Print the CPU model and name in multiprocess mode */ -ObjectClass *oc =object_get_class (OBJECT (cpu)); -const char *cpu_model =object_class_get_name (oc); -char *cpu_name = -object_get_canonical_path_component (OBJECT (cpu)); - len =snprintf ((char *)mem_buf,sizeof (buf) /2 , -"%s %s [%s]" , cpu_model, cpu_name, - cpu->halted ?"halted " :"running" ); -g_free (cpu_name); - }else { -/* memtohex() doubles the required space */ - len =snprintf ((char *)mem_buf,sizeof (buf) /2 , -"CPU#%d [%s]" , cpu->cpu_index, - cpu->halted ?"halted " :"running" ); - } -trace_gdbstub_op_extra_info ((char *)mem_buf); -memtohex (buf, mem_buf, len); -put_packet (s, buf); - } -break ; - } -#ifdef CONFIG_USER_ONLY - else if (strcmp(p, "Offsets") == 0) { - TaskState *ts = s->c_cpu->opaque; - -snprintf (buf,sizeof (buf), -"Text=" TARGET_ABI_FMT_lx";Data=" TARGET_ABI_FMT_lx -";Bss=" TARGET_ABI_FMT_lx, - ts->info->code_offset, - ts->info->data_offset, - ts->info->data_offset); -put_packet (s, buf); -break ; - } -#else /* !CONFIG_USER_ONLY */ - else if (strncmp(p, "Rcmd,", 5) == 0) { - int len = strlen(p + 5); - - if ((len % 2) != 0) { - put_packet(s, "E01"); - break; - } - len = len / 2; - hextomem(mem_buf, p + 5, len); - mem_buf[len++] = 0; - qemu_chr_be_write(s->mon_chr, mem_buf, len); - put_packet(s, "OK"); - break; - } -#endif /* !CONFIG_USER_ONLY */ - if (is_query_packet(p, "Supported", ':')) { -snprintf (buf,sizeof (buf),"PacketSize=%x" ,MAX_PACKET_LENGTH ); - cc =CPU_GET_CLASS (first_cpu); -if (cc->gdb_core_xml_file !=NULL ) { -pstrcat (buf,sizeof (buf),";qXfer:features:read+" ); - } - -if (strstr (p,"multiprocess+" )) { - s->multiprocess = true; - } -pstrcat (buf,sizeof (buf),";multiprocess+" ); - -put_packet (s, buf); -break ; - } -if (strncmp (p,"Xfer:features:read:" ,19 ) ==0 ) { -const char *xml; -target_ulong total_len; - - process =gdb_get_cpu_process (s, s->g_cpu); - cc =CPU_GET_CLASS (s->g_cpu); -if (cc->gdb_core_xml_file ==NULL ) { - goto unknown_command; - } - - gdb_has_xml = true; - p +=19 ; - xml =get_feature_xml (s, p, &p, process); -if (!xml) { -snprintf (buf,sizeof (buf),"E00" ); -put_packet (s, buf); -break ; - } - -if (*p ==':' ) - p++; - addr =strtoul (p, (char **)&p,16 ); -if (*p ==',' ) - p++; - len =strtoul (p, (char **)&p,16 ); - - total_len =strlen (xml); -if (addr > total_len) { -snprintf (buf,sizeof (buf),"E00" ); -put_packet (s, buf); -break ; - } -if (len > (MAX_PACKET_LENGTH -5 ) /2 ) - len = (MAX_PACKET_LENGTH -5 ) /2 ; -if (len < total_len - addr) { - buf[0 ] ='m' ; - len =memtox (buf +1 , xml + addr, len); - }else { - buf[0 ] ='l' ; - len =memtox (buf +1 , xml + addr, total_len - addr); - } -put_packet_binary (s, buf, len +1 , true); -break ; + { +static const GdbCmdParseEntry gen_query_cmd_desc = { + .handler = handle_gen_query, + .cmd ="q" , + .cmd_startswith =1 , + .schema ="s0" + }; + cmd_parser = &gen_query_cmd_desc; } -if (is_query_packet (p,"Attached" ,':' )) { -put_packet (s,GDB_ATTACHED ); -break ; +break ; +case 'Q' : + { +static const GdbCmdParseEntry gen_set_cmd_desc = { + .handler = handle_gen_set, + .cmd ="Q" , + .cmd_startswith =1 , + .schema ="s0" + }; + cmd_parser = &gen_set_cmd_desc; } -/* Unrecognised 'q' command. */ - goto unknown_command; - +break ;default : - unknown_command:/* put empty packet */ buf[0 ] ='\0' ;put_packet (s, buf);
Signature · 1 line
2.21.0
Quoted 4 lines · Jon Doron
This patch series refactors the old gdbstub command packets handler with a new infrastructure which should ease extending and adding new and missing gdb command packets.
Quoted 8 lines
version 10 changes:
- Remove kvm added API as this is not really required and can be accomplished by defining a coprocessor callback with a system specific xml (see:200bf5b7ffea635079cc05fdfb363372b9544ce7)
- Remove the new QEMU extended commands to read KVM MSRs
- Various fixes from Code Review by Alex Bennee
- Change the QEMU specific command to read physical memory to non-User QEMU
You don't seem to have applied an of my Reviewed-by: tags from previous iterations. It is mentioned in:
https://wiki.qemu.org/Contribute/SubmitAPatch#Proper_use_of_Reviewed-by:_tags_can_aid_review
but admittedly it's a bit buried in a wall of text. Hopefully the process diagram makes it clearer:
https://wiki.qemu.org/Contribute/DevelopmentProcess
It's also worth including a list of which patches remain un-reviewed in your summary cover text. This helps reviewers skip patches that don't need attention which is important as there are always too many patches and not enough time...
Could you please re-spin v11 with tags applied to the relevant patches?
Quoted 46 lines
version 9 changes:
- checkpatch fixesversion 8 changes:
- Add new command to display the Supported qemu generic query/sets
- kvm: Add API to read/write a MSR
- Add new commands specific for qemu:
* Command to swap the memory GDB sees to be the physical memory
* Commands to read and write a MSRversion 7 changes:
- Fixed few checkpatch complaints
- Feedback from Alex Benneeversion 4-6 changes:
- mostly feedback from Richard Hendersonversion 3 changes
- Split the single patch to many individual patches for easier reviewingversion 2 changes
- Code convention fixesJon Doron (20):
gdbstub: Add infrastructure to parse cmd packets
gdbstub: Implement deatch (D pkt) with new infra
gdbstub: Implementthread_alive(T pkt) with new infra
gdbstub: Implement continue (c pkt) with new infra
gdbstub: Implement continue with signal (C pkt) with new infra
gdbstub: Implementset_thread(H pkt) with new infra
gdbstub: Implement breakpoint commands (Z/z pkt) with new infra
gdbstub: Implement set register (P pkt) with new infra
gdbstub: Implement get register (p pkt) with new infra
gdbstub: Implement write memory (M pkt) with new infra
gdbstub: Implement read memory (m pkt) with new infra
gdbstub: Implement write all registers (G pkt) with new infra
gdbstub: Implement read all registers (g pkt) with new infra
gdbstub: Implement file io (F pkt) with new infra
gdbstub: Implement step (s pkt) with new infra
gdbstub: Implement v commands with new infra
gdbstub: Implement generic set/query (Q/q pkt) with new infra
gdbstub: Implement target halted (? pkt) with new infra
gdbstub: Clear unused variables ingdb_handle_packet
gdbstub: Implement qemu physical memory mode
Quoted 2 lines
gdbstub.c | 1753 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 1262 insertions(+), 491 deletions(-)
--
Alex Bennée