ARM: dts: nuvoton: Update Quanta GSJ BMC Device Tree.
PATCH v8 1/1 ARM: dts: nuvoton: Update Quanta GSJ BMC Device Tree.
This patch cleans up the warning message when build GSJ device tree.
1. Remove the part of i2c-slave-mqueue from GSJ device tree.
2. Thanks for Joel's reminder I also remove the nodes of disabled i2c bus from GSJ device tree.
Tested:
Build Quanta GSJ image and load on the GSJ BMC module. Ensure that BMC boots to console successful.
Signed-off-by Fran Hsu <[email protected]>
--- arch/arm/boot/dts/nuvoton-npcm730-gsj.dts | 62 +---------------------- 1 file changed, 1 insertion(+), 61 deletions(-)
arch/arm/boot/dts/nuvoton-npcm730-gsj.dts +1 -61
@@ -5,7 +5,7 @@ #include "nuvoton-npcm730.dtsi" #include "nuvoton-npcm730-gsj-gpio.dtsi" / { - model = "Quanta GSJ Board (Device Tree v11)"; + model = "Quanta GSJ Board (Device Tree v12)"; compatible = "nuvoton,npcm750"; aliases {
@@ -13,21 +13,15 @@ ethernet1 = &gmac0; serial3 = &serial3; udc9 = &udc9; - i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; i2c8 = &i2c8; i2c9 = &i2c9; i2c10 = &i2c10; i2c11 = &i2c11; i2c12 = &i2c12; - i2c13 = &i2c13; - i2c14 = &i2c14; i2c15 = &i2c15; fiu0 = &fiu0; };
@@ -162,13 +156,6 @@ status = "okay"; }; - i2c0: i2c@80000 { - #address-cells = <1>; - #size-cells = <0>; - bus-frequency = <100000>; - status = "disabled"; - }; - i2c1: i2c@81000 { #address-cells = <1>; #size-cells = <0>;
@@ -217,27 +204,6 @@ }; }; - i2c5: i2c@85000 { - #address-cells = <1>; - #size-cells = <0>; - bus-frequency = <100000>; - status = "disabled"; - }; - - i2c6: i2c@86000 { - #address-cells = <1>; - #size-cells = <0>; - bus-frequency = <100000>; - status = "disabled"; - }; - - i2c7: i2c@87000 { - #address-cells = <1>; - #size-cells = <0>; - bus-frequency = <100000>; - status = "disabled"; - }; - i2c8: i2c@88000 { #address-cells = <1>; #size-cells = <0>;
@@ -296,32 +262,6 @@ }; }; - i2c13: i2c@8d000 { - #address-cells = <1>; - #size-cells = <0>; - bus-frequency = <100000>; - status = "okay"; - - ipmb@40000010 { - compatible = "slave-mqueue"; - reg = <0x40000010>; - status = "okay"; - }; - }; - - i2c14: i2c@8e000 { - #address-cells = <1>; - #size-cells = <0>; - bus-frequency = <100000>; - status = "okay"; - - ipmb@40000012 { - compatible = "slave-mqueue"; - reg = <0x40000012>; - status = "okay"; - }; - }; - i2c15: i2c@8f000 { #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
2.21.0