watchdog: alim1535: Rewriting of alim1535 to use watchdog subsystem
PATCH v2 1/1 watchdog: alim1535: Rewriting of alim1535 to use watchdog subsystem
This patch rewrites the alim1535_wdt driver to use the watchdog subsystem. By virtue of this, it also fixes a potential race condition between ali_timeout_bits and ali_settimer().
--- drivers/watchdog/Kconfig | 1 + drivers/watchdog/alim1535_wdt.c | 275 +++++--------------------------- 2 files changed, 37 insertions(+), 239 deletions(-)
drivers/watchdog/Kconfig +1 -0
@@ -853,6 +853,7 @@ config ADVANTECH_WDT config ALIM1535_WDT tristate "ALi M1535 PMU Watchdog Timer" + select WATCHDOG_CORE depends on X86 && PCI ---help--- This is the driver for the hardware watchdog on the ALi M1535 PMU.
drivers/watchdog/alim1535_wdt.c +36 -239
371 lines not on this page · raw message
Signature · 1 line
2.17.1
Guenter Roeck
maintainerQuoted 2 lines · Mark Balantzyan
This patch rewrites the
alim1535_wdtdriver to use the watchdog subsystem. By virtue of this, it also fixes a potential race condition betweenali_timeout_bitsandali_settimer().
There is no such race condition, as I explained (or tried to explain) before. Your tool does not take into account that the device can only be opened exactly once.
Your description exceeds 75 columns.
Quoted 23 lines
Signed-off-by Mark Balantzyan <[email protected]>--- drivers/watchdog/Kconfig | 1 + drivers/watchdog/alim1535_wdt.c | 275 +++++--------------------------- 2 files changed, 37 insertions(+), 239 deletions(-)drivers/watchdog/Kconfig +1
-0@@ -853,6 +853,7 @@ config ADVANTECH_WDT config ALIM1535_WDT tristate "ALi M1535 PMU Watchdog Timer" + select WATCHDOG_CORE depends on X86 && PCI ---help--- This is the driver for the hardware watchdog on the ALi M1535 PMU.drivers/watchdog/alim1535_wdt.c +0
-0
drivers/watchdog/alim1535_wdt.c line 16
Quoted 6 lines
drivers/watchdog/alim1535_wdt.c +0
-1@@ -12,26 +12,18 @@#include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> -#include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/ioport.h>
Not needed.
drivers/watchdog/alim1535_wdt.c line 17
Quoted 6 lines
drivers/watchdog/alim1535_wdt.c +0
-5-#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/pci.h> #include <linux/uaccess.h>
No longer needed.
drivers/watchdog/alim1535_wdt.c line 18
Quoted 1 line
drivers/watchdog/alim1535_wdt.c +0
-0#include <linux/io.h>
Not needed.
drivers/watchdog/alim1535_wdt.c line 19
Quoted 1 line
drivers/watchdog/alim1535_wdt.c +1
-0+#include <linux/pci.h>
Why did you move this include file ?
drivers/watchdog/alim1535_wdt.c line 29
Quoted 13 lines
drivers/watchdog/alim1535_wdt.c +0
-3#define WATCHDOG_NAME "ALi_M1535"#define WATCHDOG_TIMEOUT 60/* 60 sec default timeout */ /* internal variables */ -static unsigned long ali_is_open; -static char ali_expect_release;static struct pci_dev *ali_pci;static u32 ali_timeout_bits;/* stores the computed timeout */ -static DEFINE_SPINLOCK (ali_lock);/* Guards the hardware */ /* module parameters */ static int timeout =WATCHDOG_TIMEOUT ;
Should be set to 0.
drivers/watchdog/alim1535_wdt.c MODULE_PARM_DESC(nowayout, · line 61
Quoted 11 lines
drivers/watchdog/alim1535_wdt.c +1
-3@@ -53,18 +45,15 @@ MODULE_PARM_DESC(nowayout,* configuration set. */ -static void ali_start (void ) +static int ali_start (struct watchdog_device *wdd) {u32 val; -spin_lock (&ali_lock); -
Side note: Presumably this lock was supposed to guard accesses to the PCI configuration register by other drivers, but it never did that. The lock was useless from the beginning.
Quoted 32 lines
drivers/watchdog/alim1535_wdt.c +3
-7pci_read_config_dword (ali_pci,0xCC , &val); val &= ~0x3F ;/* Mask count */ val |= (1 <<25 ) | ali_timeout_bits;pci_write_config_dword (ali_pci,0xCC , val); - -spin_unlock (&ali_lock); +return 0 ; }/* @@ -73,18 +62,15 @@ static void ali_start(void)* Stop the ALi watchdog countdown */ -static void ali_stop (void ) +static int ali_stop (struct watchdog_device *wdd) {u32 val; -spin_lock (&ali_lock); -pci_read_config_dword (ali_pci,0xCC , &val); val &= ~0x3F ;/* Mask count to zero (disabled) */ val &= ~(1 <<25 );/* and for safety mask the reset enable */ pci_write_config_dword (ali_pci,0xCC , val); - -spin_unlock (&ali_lock); +return 0 ; }/*
drivers/watchdog/alim1535_wdt.c static void ali_stop(void) · line 86
Quoted 10 lines
drivers/watchdog/alim1535_wdt.c +3
-2@@ -93,32 +79,24 @@ static void ali_stop(void)* Send a keepalive to the timer (actually we restart the timer). */ -static void ali_keepalive (void ) +static int ali_keepalive (struct watchdog_device *wdd) { -ali_start (); +ali_start (wdd); +return 0 ; }
If the keepalive function does nothing but call the start function, it can be omitted.
Quoted 16 lines
drivers/watchdog/alim1535_wdt.c +2
-6/* -* ali_settimer - compute the timer reload value +* ali_set_timeout - compute the timer reload value * @t: time in seconds * * Computes the timeout values needed */ -static int ali_settimer (int t) +static int ali_set_timeout (struct watchdog_device *wdd,unsigned int t) { -if (t <0 ) -return -EINVAL ; -else if (t <60 ) - ali_timeout_bits = t|(1 <<6 );
drivers/watchdog/alim1535_wdt.c static void ali_stop(void) · line 98
Quoted 10 lines
drivers/watchdog/alim1535_wdt.c +2
-8-else if (t <3600 ) - ali_timeout_bits = (t /60 )|(1 <<7 ); -else if (t <18000 ) - ali_timeout_bits = (t /300 )|(1 <<6 )|(1 <<7 ); -else -return -EINVAL ; - - timeout = t; + wdd->max_timeout =60 ; + wdd->min_timeout =1 ;
This is wrong. max_timeout and min_timeout must be set in the static declaration of struct watchdog_device. Similar, wdd.timeout should be initialized there with WATCHDOG_TIMEOUT.
Also, a maximum of 60 seconds does not make sense. The (old) code above clearly accepts timeouts up to 17999 seconds.
Where is ali_timeout_bits now initialized ?
drivers/watchdog/alim1535_wdt.c static void ali_stop(void) · line 99
Quoted 1 line
drivers/watchdog/alim1535_wdt.c +1
-0+ wdd->timeout = t;
wdd->timeout needs to be set to the actual timeout. Per the above (old) code, this is either a multiple of seconds, minutes, or five minutes, depending on the requested timeout value. For example, if t=310 is requested, the actual timeout is set to 300 seconds. wdd->timeout must then be set to 300.
Quoted 194 lines
drivers/watchdog/alim1535_wdt.c +6
-173return 0 ; }@@ -126,172 +104,6 @@ static int ali_settimer(int t)* /dev/watchdog handling */ -/* -* ali_write - writes to ALi watchdog -* @file: file from VFS -* @data: user address of data -* @len: length of data -* @ppos: pointer to the file offset -* -* Handle a write to the ALi watchdog. Writing to the file pings -* the watchdog and resets it. Writing the magic 'V' sequence allows -* the next close to turn off the watchdog. -*/ - -static ssize_t ali_write (struct file *file,const char __user *data, -size_t len,loff_t *ppos) -{ -/* See if we got the magic character 'V' and reload the timer */ -if (len) { -if (!nowayout) { -size_t i; - -/* note: just in case someone wrote the -magic character five months ago... */ - ali_expect_release =0 ; - -/* scan to see whether or not we got -the magic character */ -for (i =0 ; i != len; i++) { -char c; -if (get_user (c, data + i)) -return -EFAULT ; -if (c =='V' ) - ali_expect_release =42 ; - } - } - -/* someone wrote to us, we should reload the timer */ -ali_start (); - } -return len; -} - -/* -* ali_ioctl - handle watchdog ioctls -* @file: VFS file pointer -* @cmd: ioctl number -* @arg: arguments to the ioctl -* -* Handle the watchdog ioctls supported by the ALi driver. Really -* we want an extension to enable irq ack monitoring and the like -*/ - -static long ali_ioctl (struct file *file,unsigned int cmd,unsigned long arg) -{ -void __user *argp = (void __user *)arg; -int __user *p = argp; -static const struct watchdog_info ident = { - .options =WDIOF_KEEPALIVEPING | -WDIOF_SETTIMEOUT | -WDIOF_MAGICCLOSE , - .firmware_version =0 , - .identity ="ALi M1535 WatchDog Timer" , - }; - -switch (cmd) { -case WDIOC_GETSUPPORT : -return copy_to_user (argp, &ident,sizeof (ident)) ? -EFAULT :0 ; - -case WDIOC_GETSTATUS : -case WDIOC_GETBOOTSTATUS : -return put_user (0 , p); -case WDIOC_SETOPTIONS : - { -int new_options, retval = -EINVAL ; - -if (get_user (new_options, p)) -return -EFAULT ; -if (new_options &WDIOS_DISABLECARD ) { -ali_stop (); - retval =0 ; - } -if (new_options &WDIOS_ENABLECARD ) { -ali_start (); - retval =0 ; - } -return retval; - } -case WDIOC_KEEPALIVE : -ali_keepalive (); -return 0 ; -case WDIOC_SETTIMEOUT : - { -int new_timeout; -if (get_user (new_timeout, p)) -return -EFAULT ; -if (ali_settimer (new_timeout)) -return -EINVAL ; -ali_keepalive (); - } -/* fall through */ -case WDIOC_GETTIMEOUT : -return put_user (timeout, p); -default : -return -ENOTTY ; - } -} - -/* -* ali_open - handle open of ali watchdog -* @inode: inode from VFS -* @file: file from VFS -* -* Open the ALi watchdog device. Ensure only one person opens it -* at a time. Also start the watchdog running. -*/ - -static int ali_open (struct inode *inode,struct file *file) -{ -/* /dev/watchdog can only be opened once */ -if (test_and_set_bit (0 , &ali_is_open)) -return -EBUSY ; - -/* Activate */ -ali_start (); -return nonseekable_open (inode, file); -} - -/* -* ali_release - close an ALi watchdog -* @inode: inode from VFS -* @file: file from VFS -* -* Close the ALi watchdog device. Actual shutdown of the timer -* only occurs if the magic sequence has been set. -*/ - -static int ali_release (struct inode *inode,struct file *file) -{ -/* -* Shut off the timer. -*/ -if (ali_expect_release ==42 ) -ali_stop (); -else { -pr_crit ("Unexpected close, not stopping watchdog!\n" ); -ali_keepalive (); - } -clear_bit (0 , &ali_is_open); - ali_expect_release =0 ; -return 0 ; -} - -/* -* ali_notify_sys - System down notifier -* -* Notifier for system down -*/ - - -static int ali_notify_sys (struct notifier_block *this, -unsigned long code,void *unused) -{ -if (code ==SYS_DOWN || code ==SYS_HALT ) -ali_stop ();/* Turn the WDT off */ -return NOTIFY_DONE ; -} -/* * Data for PCI driver interface * @@ -361,23 +173,17 @@ static int __init ali_find_watchdog(void)* Kernel Interfaces */ -static const struct file_operations ali_fops = { - .owner =THIS_MODULE , - .llseek = no_llseek, - .write = ali_write, - .unlocked_ioctl = ali_ioctl, - .open = ali_open, - .release = ali_release, +static struct watchdog_ops alim1535wdt_ops = { + .owner =THIS_MODULE , + .start = ali_start, + .stop = ali_stop, + .ping = ali_keepalive, + .set_timeout = ali_set_timeout, };
drivers/watchdog/alim1535_wdt.c static int __init ali_find_watchdog(void) · line 184
Quoted 10 lines
drivers/watchdog/alim1535_wdt.c +1
-8-static struct miscdevice ali_miscdev = { - .minor =WATCHDOG_MINOR , - .name ="watchdog" , - .fops = &ali_fops, -}; - -static struct notifier_block ali_notifier = { - .notifier_call = ali_notify_sys, +static struct watchdog_device alim1535wdt_wdd = {
Also set:
.info
.timeout
.min_timeout
.max_timeout
Quoted 20 lines
drivers/watchdog/alim1535_wdt.c +7
-5+ .ops = &alim1535wdt_ops, + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, };/* @@ -403,30 +209,25 @@ static int __init watchdog_init(void) timeout); } -/* Calculate the watchdog's timeout */ -ali_settimer (timeout); +watchdog_stop_on_reboot (&alim1535wdt_wdd); + +watchdog_init_timeout (&alim1535wdt_wdd, timeout,NULL ); + +watchdog_set_nowayout (&alim1535wdt_wdd, nowayout); - ret =register_reboot_notifier (&ali_notifier); -if (ret !=0 ) { -pr_err ("cannot register reboot notifier (err=%d)\n" , ret);
drivers/watchdog/alim1535_wdt.c static int __init watchdog_init(void) · line 221
Quoted 10 lines
drivers/watchdog/alim1535_wdt.c +2
-6- goto out; - } + ret =watchdog_register_device (&alim1535wdt_wdd); - ret =misc_register (&ali_miscdev);if (ret !=0 ) { -pr_err ("cannot register miscdev on minor=%d (err=%d)\n" , -WATCHDOG_MINOR , ret); - goto unreg_reboot; + goto reboot_unreg;
A goto to a return statement does not add value.
drivers/watchdog/alim1535_wdt.c static int __init watchdog_init(void) · line 226
Quoted 7 lines
drivers/watchdog/alim1535_wdt.c +3
-2} -pr_info ("initialized. timeout=%d sec (nowayout=%d)\n" , - timeout, nowayout); +/* Calculate the watchdog's timeout */ +ali_set_timeout (&alim1535wdt_wdd, timeout); +
This is unnecessary. The values can and should be initialized in static struct watchdog_device alim1535wdt_wdd.
Quoted 26 lines
drivers/watchdog/alim1535_wdt.c +3
-9+return 0 ; -out: +reboot_unreg:return ret; -unreg_reboot: -unregister_reboot_notifier (&ali_notifier); - goto out; }/* @@ -437,12 +238,8 @@ unreg_reboot: static void __exit watchdog_exit(void) { -/* Stop the timer before we leave */ -ali_stop (); -/* Deregister */ -misc_deregister (&ali_miscdev); -unregister_reboot_notifier (&ali_notifier); +watchdog_unregister_device (&alim1535wdt_wdd);pci_dev_put (ali_pci); }
drivers/watchdog/alim1535_wdt.c module_exit(watchdog_exit); · line 251
Quoted 5 lines
drivers/watchdog/alim1535_wdt.c +1
-1@@ -451,4 +248,4 @@ module_exit(watchdog_exit);MODULE_AUTHOR ("Alan Cox" );MODULE_DESCRIPTION ("ALi M1535 PMU Watchdog Timer driver" ); -MODULE_LICENSE ("GPL" ); +MODULE_LICENSE ("GPL" );
I am at loss what is different here.