Skip to contentSkip to conversation

imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled

PATCH New sbabic at denx.de 1 participant 1 message Aug 5, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 3/4 imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled

Quoted 18 lines

In case CONFIG_SECURE_BOOT is enabled we need to limit the SPL size to avoid a possible HAB failure event:
--------- HAB Event 1 -----------------
event data:

        0xdb 0x00 0x14 0x42 0x33 0x22 0x33 0x00
        0x00 0x00 0x00 0x0f 0x00 0x90 0x70 0x00
        0x00 0x01 0x10 0x00

STS = HAB_FAILURE (0x33)
RSN = HAB_INV_ADDRESS (0x22)
CTX = HAB_CTX_TARGET (0x33)
ENG = HAB_ENG_ANY (0x00)
As explained in Commit 23612534fe0f ("spl: imx6: Provide a SPL_SIZE_LIMIT default") the i.MX6 SPL size limit is 68KB.
The ROM code is copying the image size defined in boot data to its respective load address, in case we exceed the OCRAM free region a HAB invalid address failure event is generated.
The maximum CSF size is defined in CONFIG_CSF_SIZE, reduce SPL size limit based on this configuration.

Quoted 2 lines

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================