ARM: omap3_logic: Fix SPL boot failure when EHCI enabled
PATCH 1/1 ARM: omap3_logic: Fix SPL boot failure when EHCI enabled
Some of the USB code is still being built into SPL even when the SPL menu options have it explicitly disabled for SPL. Unit there is a better solution, This patch undefines CONFIG_USB_EHCI_OMAP when building SPL which reduces the code and lets the board boot again.
for SOM-LV Boards")
include/configs/omap3_logic.h +3 -0
@@ -30,6 +30,9 @@/* I2C */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50/* EEPROM AT24C64 */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_USB_EHCI_OMAP +#endif #ifdef CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 4#endif
Signature · 1 line
2.17.1
PATCH 1/1 ARM: omap3_logic: Fix SPL boot failure when EHCI enabled
include/configs/omap3_logic.h
Quoted 12 lines · Adam Ford
Some of the USB code is still being built into SPL even when the SPL menu options have it explicitly disabled for SPL. Unit there is a better solution, This patch undefines
CONFIG_USB_EHCI_OMAPwhen building SPL which reduces the code and lets the board boot again.Fixes 25e4ff45b17d ("ARM: omap3_logic: Enable OMAP EHCI supportfor SOM-LV Boards")
Signed-off-by Adam Ford <[email protected]>include/configs/omap3_logic.h +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190826/4df3f7d6/attachment.sig>