Skip to contentSkip to conversation

drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"

PATCH In review Sasha Levin 13 participants 195 messages Sep 3, 2019 – Sep 15, 2019 Page 1 of 2

Subsystems (38)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/167 drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"

From: Jan-Marek Glogowski <[email protected]>

[ Upstream commit 3cf71bc9904d7ee4a25a822c5dcb54c7804ea388 ]

This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse").
It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.

This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")

Fixes c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
[Cleaned up commit message, added stable cc]
---
 drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +16 -0
index f92079e19de8d..20cd4c8acecc3 100644
@@ -4739,6 +4739,22 @@ intel_dp_long_pulse(struct intel_connector *connector,
 		 */
 		status = connector_status_disconnected;
 		goto out;
+	} else {
+		/*
+		 * If display is now connected check links status,
+		 * there has been known issues of link loss triggering
+		 * long pulse.
+		 *
+		 * Some sinks (eg. ASUS PB287Q) seem to perform some
+		 * weird HPD ping pong during modesets. So we can apparently
+		 * end up with HPD going low during a modeset, and then
+		 * going back up soon after. And once that happens we must
+		 * retrain the link to get a picture. That's in case no
+		 * userspace component reacted to intermittent HPD dip.
+		 */
+		struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+
+		intel_dp_retrain_link(encoder, ctx);
 	}
 
 	/*
Signature · 6 lines
2.20.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#4 lore raw

PATCH 5/167 keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h

From: David Howells <[email protected]>

[ Upstream commit 2ecefa0a15fd0ef88b9cd5d15ceb813008136431 ]

The keyctl_dh_params struct in uapi/linux/keyctl.h contains the symbol "private" which means that the header file will cause compilation failure if #included in to a C++ program. Further, the patch that added the same struct to the keyutils package named the symbol "priv", not "private".

The previous attempt to fix this (commit 8a2336e549d3) did so by simply renaming the kernel's copy of the field to dh_private, but this then breaks existing userspace and as such has been reverted (commit 8c0f9f5b309d).

[And note, to those who think that wrapping the struct in extern "C" {}
will work: it won't; that only changes how symbol names are presented to the assembler and linker.].

Instead, insert an anonymous union around the "private" member and add a second member in there with the name "priv" to match the one in the keyutils package. The "private" member is then wrapped in !__cplusplus cpp-conditionals to hide it from C++.

Fixes ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Fixes 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
cc Randy Dunlap <[email protected]>
cc Lubomir Rintel <[email protected]>
cc James Morris <[email protected]>
cc Mat Martineau <[email protected]>
cc Stephan Mueller <[email protected]>
cc Andrew Morton <[email protected]>
cc Linus Torvalds <[email protected]>
---
 include/uapi/linux/keyctl.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
include/uapi/linux/keyctl.h +6 -1
index 7b8c9e19bad1c..0f3cb13db8e93 100644
@@ -65,7 +65,12 @@
 
 /* keyctl structures */
 struct keyctl_dh_params {
-	__s32 private;
+	union {
+#ifndef __cplusplus
+		__s32 private;
+#endif
+		__s32 priv;
+	};
 	__s32 prime;
 	__s32 base;
 };
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/167 remoteproc: qcom: q6v5-mss: add SCM probe dependency

In reply to Sasha Levin

From: Brian Norris <[email protected]>

[ Upstream commit bbcda30271752bb7490f2e2aef5411dbcae69116 ]

The memory ownership transfer request is performed using SCM, ensure that SCM is available before we probe the driver if memory protection is needed by the subsystem.

Fixes 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch")
[bjorn: Added condition for need_mem_protection, updated commit message]
---
 drivers/remoteproc/qcom_q6v5_pil.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/remoteproc/qcom_q6v5_pil.c +3 -0
index d7a4b9eca5d25..6a84b6372897d 100644
@@ -1132,6 +1132,9 @@ static int q6v5_probe(struct platform_device *pdev)
 	if (!desc)
 		return -EINVAL;
 
+	if (desc->need_mem_protection && !qcom_scm_is_available())
+		return -EPROBE_DEFER;
+
 	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
 			    desc->hexagon_mba_image, sizeof(*qproc));
 	if (!rproc) {
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/167 drm/amdgpu/gfx9: Update gfx9 golden settings.

In reply to Sasha Levin

From: Feifei Xu <[email protected]>

[ Upstream commit 54d682d9a5b357eb711994fa94ef1bc44d7ce9d9 ]

Update the goldensettings for vega20.

---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +1 -1
index 46568497ef181..f040ec10eecf6 100644
@@ -82,7 +82,7 @@ MODULE_FIRMWARE("amdgpu/raven_rlc.bin");
 
 static const struct soc15_reg_golden golden_settings_gc_9_0[] =
 {
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG2, 0xf00fffff, 0x00000420),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG2, 0xf00fffff, 0x00000400),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGB_GPU_ID, 0x0000000f, 0x00000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_BINNER_EVENT_CNTL_3, 0x00000003, 0x82400024),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE, 0x3fffffff, 0x00000001),
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#9 lore raw

PATCH 10/167 drm/amdgpu: Update gc_9_0 golden settings.

In reply to Sasha Levin

From: Feifei Xu <[email protected]>

[ Upstream commit c55045adf7210d246a016c961916f078ed31a951 ]

Add mmDB_DEBUG3 settings.

---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +1 -0
index f040ec10eecf6..7824116498169 100644
@@ -83,6 +83,7 @@ MODULE_FIRMWARE("amdgpu/raven_rlc.bin");
 static const struct soc15_reg_golden golden_settings_gc_9_0[] =
 {
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG2, 0xf00fffff, 0x00000400),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG3, 0x80000000, 0x80000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGB_GPU_ID, 0x0000000f, 0x00000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_BINNER_EVENT_CNTL_3, 0x00000003, 0x82400024),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE, 0x3fffffff, 0x00000001),
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#15 lore raw

PATCH 16/167 drm/i915: Fix intel_dp_mst_best_encoder()

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit a9f9ca33d1fe9325f414914be526c0fc4ba5281c ]

Currently, i915 appears to rely on blocking modesets on no-longer-present MSTB ports by simply returning NULL for ->best_encoder(), which in turn causes any new atomic commits that don't disable the CRTC to fail. This is wrong however, since we still want to allow userspace to disable CRTCs on no-longer-present MSTB ports by changing the DPMS state to off and this still requires that we retrieve an encoder.

So, fix this by always returning a valid encoder regardless of the state of the MST port.

Changes since v1:
- Remove mst atomic helper, since this got replaced with a much simpler solution

---
 drivers/gpu/drm/i915/intel_dp_mst.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/i915/intel_dp_mst.c +0 -2
index 1fec0c71b4d95..58ba14966d4f1 100644
@@ -408,8 +408,6 @@ static struct drm_encoder *intel_mst_atomic_best_encoder(struct drm_connector *c
 	struct intel_dp *intel_dp = intel_connector->mst_port;
 	struct intel_crtc *crtc = to_intel_crtc(state->crtc);
 
-	if (!READ_ONCE(connector->registered))
-		return NULL;
 	return &intel_dp->mst_encoders[crtc->pipe]->base.base;
 }
 
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 17/167 drm/i915: Rename PLANE_CTL_DECOMPRESSION_ENABLE

In reply to Sasha Levin

From: Dhinakaran Pandiyan <[email protected]>

[ Upstream commit 53867b46fa8443713b3aee520d6ca558b222d829 ]

Rename PLANE_CTL_DECOMPRESSION_ENABLE to resemble the bpsec name - PLANE_CTL_RENDER_DECOMPRESSION_ENABLE

---
 drivers/gpu/drm/i915/i915_reg.h      | 2 +-
 drivers/gpu/drm/i915/intel_display.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -1
index 16f5d2d938014..4e070afb2738b 100644
@@ -6531,7 +6531,7 @@ enum {
 #define   PLANE_CTL_YUV422_UYVY			(1 << 16)
 #define   PLANE_CTL_YUV422_YVYU			(2 << 16)
 #define   PLANE_CTL_YUV422_VYUY			(3 << 16)
-#define   PLANE_CTL_DECOMPRESSION_ENABLE	(1 << 15)
+#define   PLANE_CTL_RENDER_DECOMPRESSION_ENABLE	(1 << 15)
 #define   PLANE_CTL_TRICKLE_FEED_DISABLE	(1 << 14)
 #define   PLANE_CTL_PLANE_GAMMA_DISABLE		(1 << 13) /* Pre-GLK */
 #define   PLANE_CTL_TILED_MASK			(0x7 << 10)
drivers/gpu/drm/i915/intel_display.c +4 -4
index 3bd44d042a1d9..f5367bdc04049 100644
@@ -3561,11 +3561,11 @@ static u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
 	case I915_FORMAT_MOD_Y_TILED:
 		return PLANE_CTL_TILED_Y;
 	case I915_FORMAT_MOD_Y_TILED_CCS:
-		return PLANE_CTL_TILED_Y | PLANE_CTL_DECOMPRESSION_ENABLE;
+		return PLANE_CTL_TILED_Y | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
 	case I915_FORMAT_MOD_Yf_TILED:
 		return PLANE_CTL_TILED_YF;
 	case I915_FORMAT_MOD_Yf_TILED_CCS:
-		return PLANE_CTL_TILED_YF | PLANE_CTL_DECOMPRESSION_ENABLE;
+		return PLANE_CTL_TILED_YF | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
 	default:
 		MISSING_CASE(fb_modifier);
 	}
@@ -8812,13 +8812,13 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 		fb->modifier = I915_FORMAT_MOD_X_TILED;
 		break;
 	case PLANE_CTL_TILED_Y:
-		if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
+		if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
 			fb->modifier = I915_FORMAT_MOD_Y_TILED_CCS;
 		else
 			fb->modifier = I915_FORMAT_MOD_Y_TILED;
 		break;
 	case PLANE_CTL_TILED_YF:
-		if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
+		if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
 			fb->modifier = I915_FORMAT_MOD_Yf_TILED_CCS;
 		else
 			fb->modifier = I915_FORMAT_MOD_Yf_TILED;
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#17 lore raw

PATCH 18/167 drm/i915/gen9+: Fix initial readout for Y tiled framebuffers

In reply to Sasha Levin

From: Imre Deak <[email protected]>

[ Upstream commit 914a4fd8cd28016038ce749a818a836124a8d270 ]

If BIOS configured a Y tiled FB we failed to set up the backing object tiling accordingly, leading to a lack of GT fence installed and a garbled console.

The problem was bisected to
commit 011f22eb545a ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2") but it just revealed a pre-existing issue.

Kudos to Ville who suspected a missing fence looking at the corruption on the screen.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264

Fixes bc8d7dffacb1 ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
---
 drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +23 -2
index f5367bdc04049..2622dfc7d2d9a 100644
@@ -2712,6 +2712,17 @@ intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
 	if (size_aligned * 2 > dev_priv->stolen_usable_size)
 		return false;
 
+	switch (fb->modifier) {
+	case DRM_FORMAT_MOD_LINEAR:
+	case I915_FORMAT_MOD_X_TILED:
+	case I915_FORMAT_MOD_Y_TILED:
+		break;
+	default:
+		DRM_DEBUG_DRIVER("Unsupported modifier for initial FB: 0x%llx\n",
+				 fb->modifier);
+		return false;
+	}
+
 	mutex_lock(&dev->struct_mutex);
 	obj = i915_gem_object_create_stolen_for_preallocated(dev_priv,
 							     base_aligned,
@@ -2721,8 +2732,17 @@ intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
 	if (!obj)
 		return false;
 
-	if (plane_config->tiling == I915_TILING_X)
-		obj->tiling_and_stride = fb->pitches[0] | I915_TILING_X;
+	switch (plane_config->tiling) {
+	case I915_TILING_NONE:
+		break;
+	case I915_TILING_X:
+	case I915_TILING_Y:
+		obj->tiling_and_stride = fb->pitches[0] | plane_config->tiling;
+		break;
+	default:
+		MISSING_CASE(plane_config->tiling);
+		return false;
+	}
 
 	mode_cmd.pixel_format = fb->format->format;
 	mode_cmd.width = fb->width;
@@ -8812,6 +8832,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 		fb->modifier = I915_FORMAT_MOD_X_TILED;
 		break;
 	case PLANE_CTL_TILED_Y:
+		plane_config->tiling = I915_TILING_Y;
 		if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
 			fb->modifier = I915_FORMAT_MOD_Y_TILED_CCS;
 		else
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 22/167 powerplay: Respect units on max dcfclk watermark

In reply to Sasha Levin

From: David Francis <[email protected]>

[ Upstream commit f191415b24a3ad3fa22088af7cd7fc328a2f469f ]

In a refactor, the watermark clock inputs to powerplay from DC were changed from units of 10kHz to kHz clocks.

One division by 100 was not converted into a division by 1000.

---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c +1 -1
index 2aab1b4759459..a321c465b7dce 100644
@@ -674,7 +674,7 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table,
 		table->WatermarkRow[1][i].MaxClock =
 			cpu_to_le16((uint16_t)
 			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz) /
-			100);
+			1000);
 		table->WatermarkRow[1][i].MinUclk =
 			cpu_to_le16((uint16_t)
 			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz) /
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 23/167 drm/amd/pp: Fix truncated clock value when set watermark

In reply to Sasha Levin

From: Rex Zhu <[email protected]>

[ Upstream commit 4d454e9ffdb1ef5a51ebc147b5389c96048db683 ]

the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated.

---
 .../gpu/drm/amd/powerplay/hwmgr/smu_helper.c  | 32 +++++++++----------
 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c +16 -16
index a321c465b7dce..cede78cdf28db 100644
@@ -669,20 +669,20 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table,
 	for (i = 0; i < wm_with_clock_ranges->num_wm_dmif_sets; i++) {
 		table->WatermarkRow[1][i].MinClock =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz /
+			1000));
 		table->WatermarkRow[1][i].MaxClock =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz /
+			1000));
 		table->WatermarkRow[1][i].MinUclk =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz /
+			1000));
 		table->WatermarkRow[1][i].MaxUclk =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz /
+			1000));
 		table->WatermarkRow[1][i].WmSetting = (uint8_t)
 				wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_set_id;
 	}
@@ -690,20 +690,20 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table,
 	for (i = 0; i < wm_with_clock_ranges->num_wm_mcif_sets; i++) {
 		table->WatermarkRow[0][i].MinClock =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz /
+			1000));
 		table->WatermarkRow[0][i].MaxClock =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz /
+			1000));
 		table->WatermarkRow[0][i].MinUclk =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz /
+			1000));
 		table->WatermarkRow[0][i].MaxUclk =
 			cpu_to_le16((uint16_t)
-			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz) /
-			1000);
+			(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz /
+			1000));
 		table->WatermarkRow[0][i].WmSetting = (uint8_t)
 				wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_set_id;
 	}
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#23 lore raw

PATCH 24/167 drm/amd/dm: Understand why attaching path/tile properties are needed

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit 04ac4b0ed412f65230b456fcd9aa07e13befff89 ]

Path property is used for userspace to know what MST connector goes to what actual DRM DisplayPort connector, the tiling property is for tiling configurations. Not sure what else there is to figure out.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +0 -3
index 59445c83f0238..c85bea70d9652 100644
@@ -377,9 +377,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 	drm_connector_attach_encoder(&aconnector->base,
 				     &aconnector->mst_encoder->base);
 
-	/*
-	 * TODO: understand why this one is needed
-	 */
 	drm_object_attach_property(
 		&connector->base,
 		dev->mode_config.path_property,
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#29 lore raw

PATCH 30/167 s390/zcrypt: reinit ap queue state machine during device probe

In reply to Sasha Levin

From: Harald Freudenberger <[email protected]>

[ Upstream commit 104f708fd1241b22f808bdf066ab67dc5a051de5 ]

Until the vfio-ap driver came into live there was a well known agreement about the way how ap devices are initialized and their states when the driver's probe function is called.

However, the vfio device driver when receiving an ap queue device does additional resets thereby removing the registration for interrupts for the ap device done by the ap bus core code. So when later the vfio driver releases the device and one of the default zcrypt drivers takes care of the device the interrupt registration needs to get renewed. The current code does no renew and result is that requests send into such a queue will never see a reply processed - the application hangs.

This patch adds a function which resets the aq queue state machine for the ap queue device and triggers the walk through the initial states (which are reset and registration for interrupts). This function is now called before the driver's probe function is invoked.

When the association between driver and device is released, the driver's remove function is called. The current implementation calls a ap queue function ap_queue_remove(). This invokation has been moved to the ap bus function to make the probe / remove pair for ap bus and drivers more symmetric.

Fixes 7e0bdbe5c21c ("s390/zcrypt: AP bus support for alternate driver(s)")
---
 drivers/s390/crypto/ap_bus.c        |  8 ++++----
 drivers/s390/crypto/ap_bus.h        |  1 +
 drivers/s390/crypto/ap_queue.c      | 15 +++++++++++++++
 drivers/s390/crypto/zcrypt_cex2a.c  |  1 -
 drivers/s390/crypto/zcrypt_cex4.c   |  1 -
 drivers/s390/crypto/zcrypt_pcixcc.c |  1 -
 6 files changed, 20 insertions(+), 7 deletions(-)
drivers/s390/crypto/ap_bus.c +4 -4
index a57b969b89733..3be54651698a3 100644
@@ -777,6 +777,8 @@ static int ap_device_probe(struct device *dev)
 		drvres = ap_drv->flags & AP_DRIVER_FLAG_DEFAULT;
 		if (!!devres != !!drvres)
 			return -ENODEV;
+		/* (re-)init queue's state machine */
+		ap_queue_reinit_state(to_ap_queue(dev));
 	}
 
 	/* Add queue/card to list of active queues/cards */
@@ -809,6 +811,8 @@ static int ap_device_remove(struct device *dev)
 	struct ap_device *ap_dev = to_ap_dev(dev);
 	struct ap_driver *ap_drv = ap_dev->drv;
 
+	if (is_queue_dev(dev))
+		ap_queue_remove(to_ap_queue(dev));
 	if (ap_drv->remove)
 		ap_drv->remove(ap_dev);
 
@@ -1446,10 +1450,6 @@ static void ap_scan_bus(struct work_struct *unused)
 			aq->ap_dev.device.parent = &ac->ap_dev.device;
 			dev_set_name(&aq->ap_dev.device,
 				     "%02x.%04x", id, dom);
-			/* Start with a device reset */
-			spin_lock_bh(&aq->lock);
-			ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
-			spin_unlock_bh(&aq->lock);
 			/* Register device */
 			rc = device_register(&aq->ap_dev.device);
 			if (rc) {
drivers/s390/crypto/ap_bus.h +1 -0
index 5246cd8c16a60..7e85d238767ba 100644
@@ -253,6 +253,7 @@ struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type);
 void ap_queue_remove(struct ap_queue *aq);
 void ap_queue_suspend(struct ap_device *ap_dev);
 void ap_queue_resume(struct ap_device *ap_dev);
+void ap_queue_reinit_state(struct ap_queue *aq);
 
 struct ap_card *ap_card_create(int id, int queue_depth, int raw_device_type,
 			       int comp_device_type, unsigned int functions);
drivers/s390/crypto/ap_queue.c +15 -0
index 66f7334bcb032..0aa4b3ccc948c 100644
@@ -718,5 +718,20 @@ void ap_queue_remove(struct ap_queue *aq)
 {
 	ap_flush_queue(aq);
 	del_timer_sync(&aq->timeout);
+
+	/* reset with zero, also clears irq registration */
+	spin_lock_bh(&aq->lock);
+	ap_zapq(aq->qid);
+	aq->state = AP_STATE_BORKED;
+	spin_unlock_bh(&aq->lock);
 }
 EXPORT_SYMBOL(ap_queue_remove);
+
+void ap_queue_reinit_state(struct ap_queue *aq)
+{
+	spin_lock_bh(&aq->lock);
+	aq->state = AP_STATE_RESET_START;
+	ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
+	spin_unlock_bh(&aq->lock);
+}
+EXPORT_SYMBOL(ap_queue_reinit_state);
drivers/s390/crypto/zcrypt_cex2a.c +0 -1
index f4ae5fa30ec97..ff17a00273f77 100644
@@ -198,7 +198,6 @@ static void zcrypt_cex2a_queue_remove(struct ap_device *ap_dev)
 	struct ap_queue *aq = to_ap_queue(&ap_dev->device);
 	struct zcrypt_queue *zq = aq->private;
 
-	ap_queue_remove(aq);
 	if (zq)
 		zcrypt_queue_unregister(zq);
 }
drivers/s390/crypto/zcrypt_cex4.c +0 -1
index 35d58dbbc4da3..2a42e5962317a 100644
@@ -273,7 +273,6 @@ static void zcrypt_cex4_queue_remove(struct ap_device *ap_dev)
 	struct ap_queue *aq = to_ap_queue(&ap_dev->device);
 	struct zcrypt_queue *zq = aq->private;
 
-	ap_queue_remove(aq);
 	if (zq)
 		zcrypt_queue_unregister(zq);
 }
drivers/s390/crypto/zcrypt_pcixcc.c +0 -1
index 94d9f7224aea3..baa683c3f5d30 100644
@@ -276,7 +276,6 @@ static void zcrypt_pcixcc_queue_remove(struct ap_device *ap_dev)
 	struct ap_queue *aq = to_ap_queue(&ap_dev->device);
 	struct zcrypt_queue *zq = aq->private;
 
-	ap_queue_remove(aq);
 	if (zq)
 		zcrypt_queue_unregister(zq);
 }
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 33/167 drm/i915: Restore sane defaults for KMS on GEM error load

In reply to Sasha Levin

From: Chris Wilson <[email protected]>

[ Upstream commit 7ed43df720c007d60bee6d81da07bcdc7e4a55ae ]

If we fail during GEM initialisation, we scrub the HW state by performing a device level GPU resuet. However, we want to leave the system in a usable state (with functioning KMS but no GEM) so after scrubbing the HW state, we need to restore some sane defaults and re-enable the low-level common parts of the GPU (such as the GMCH).

v2: Restore GTT entries.

---
 drivers/gpu/drm/i915/i915_gem.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_gem.c +10 -1
index 03cda197fb6b8..5019dfd8bcf16 100644
@@ -5595,6 +5595,8 @@ int i915_gem_init(struct drm_i915_private *dev_priv)
 		i915_gem_cleanup_userptr(dev_priv);
 
 	if (ret == -EIO) {
+		mutex_lock(&dev_priv->drm.struct_mutex);
+
 		/*
 		 * Allow engine initialisation to fail by marking the GPU as
 		 * wedged. But we only want to do this where the GPU is angry,
@@ -5605,7 +5607,14 @@ int i915_gem_init(struct drm_i915_private *dev_priv)
 					"Failed to initialize GPU, declaring it wedged!\n");
 			i915_gem_set_wedged(dev_priv);
 		}
-		ret = 0;
+
+		/* Minimal basic recovery for KMS */
+		ret = i915_ggtt_enable_hw(dev_priv);
+		i915_gem_restore_gtt_mappings(dev_priv);
+		i915_gem_restore_fences(dev_priv);
+		intel_init_clock_gating(dev_priv);
+
+		mutex_unlock(&dev_priv->drm.struct_mutex);
 	}
 
 	i915_gem_drain_freed_objects(dev_priv);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#33 lore raw

PATCH 34/167 drm/i915: Cleanup gt powerstate from gem

In reply to Sasha Levin

From: Chris Wilson <[email protected]>

[ Upstream commit 30b710840e4b9c9699d3d4b33fb19ad8880d4614 ]

Since the gt powerstate is allocated by i915_gem_init, clean it from i915_gem_fini for symmetry and to correct the imbalance on error.

---
 drivers/gpu/drm/i915/i915_gem.c      | 3 +++
 drivers/gpu/drm/i915/intel_display.c | 4 ----
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +3 -0
index 5019dfd8bcf16..e81abd468a15d 100644
@@ -5624,6 +5624,7 @@ int i915_gem_init(struct drm_i915_private *dev_priv)
 void i915_gem_fini(struct drm_i915_private *dev_priv)
 {
 	i915_gem_suspend_late(dev_priv);
+	intel_disable_gt_powersave(dev_priv);
 
 	/* Flush any outstanding unpin_work. */
 	i915_gem_drain_workqueue(dev_priv);
@@ -5635,6 +5636,8 @@ void i915_gem_fini(struct drm_i915_private *dev_priv)
 	i915_gem_contexts_fini(dev_priv);
 	mutex_unlock(&dev_priv->drm.struct_mutex);
 
+	intel_cleanup_gt_powersave(dev_priv);
+
 	intel_uc_fini_misc(dev_priv);
 	i915_gem_cleanup_userptr(dev_priv);
 
drivers/gpu/drm/i915/intel_display.c +0 -4
index 2622dfc7d2d9a..6902fd2da19ca 100644
@@ -15972,8 +15972,6 @@ void intel_modeset_cleanup(struct drm_device *dev)
 	flush_work(&dev_priv->atomic_helper.free_work);
 	WARN_ON(!llist_empty(&dev_priv->atomic_helper.free_list));
 
-	intel_disable_gt_powersave(dev_priv);
-
 	/*
 	 * Interrupts and polling as the first thing to avoid creating havoc.
 	 * Too much stuff here (turning of connectors, ...) would
@@ -16001,8 +15999,6 @@ void intel_modeset_cleanup(struct drm_device *dev)
 
 	intel_cleanup_overlay(dev_priv);
 
-	intel_cleanup_gt_powersave(dev_priv);
-
 	intel_teardown_gmbus(dev_priv);
 
 	destroy_workqueue(dev_priv->modeset_wq);
Signature · 6 lines
2.20.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#34 lore raw

PATCH 35/167 KVM: PPC: Book3S HV: Fix race between kvm_unmap_hva_range and MMU mode switch

In reply to Sasha Levin

From: Paul Mackerras <[email protected]>

[ Upstream commit 234ff0b729ad882d20f7996591a964965647addf ]

Testing has revealed an occasional crash which appears to be caused by a race between kvmppc_switch_mmu_to_hpt and kvm_unmap_hva_range_hv. The symptom is a NULL pointer dereference in __find_linux_pte() called from kvm_unmap_radix() with kvm->arch.pgtable = NULL.

Looking at kvmppc_switch_mmu_to_hpt(), it does indeed clear kvm->arch.pgtable (via kvmppc_free_radix()) before setting kvm->arch.radix to NULL, and there is nothing to prevent kvm_unmap_hva_range_hv() or the other MMU callback functions from being called concurrently with kvmppc_switch_mmu_to_hpt() or kvmppc_switch_mmu_to_radix().

This patch therefore adds calls to spin_lock/unlock on the kvm->mmu_lock around the assignments to kvm->arch.radix, and makes sure that the partition-scoped radix tree or HPT is only freed after changing kvm->arch.radix.

This also takes the kvm->mmu_lock in kvmppc_rmap_reset() to make sure that the clearing of each rmap array (one per memslot) doesn't happen concurrently with use of the array in the kvm_unmap_hva_range_hv() or the other MMU callbacks.

Fixes 18c3640cefc7 ("KVM: PPC: Book3S HV: Add infrastructure for running HPT guests on radix host")
Cc [email protected] # v4.15+
---
 arch/powerpc/kvm/book3s_64_mmu_hv.c |  3 +++
 arch/powerpc/kvm/book3s_hv.c        | 15 +++++++++++----
 2 files changed, 14 insertions(+), 4 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +3 -0
index 68e14afecac85..a488c105b9234 100644
@@ -744,12 +744,15 @@ void kvmppc_rmap_reset(struct kvm *kvm)
 	srcu_idx = srcu_read_lock(&kvm->srcu);
 	slots = kvm_memslots(kvm);
 	kvm_for_each_memslot(memslot, slots) {
+		/* Mutual exclusion with kvm_unmap_hva_range etc. */
+		spin_lock(&kvm->mmu_lock);
 		/*
 		 * This assumes it is acceptable to lose reference and
 		 * change bits across a reset.
 		 */
 		memset(memslot->arch.rmap, 0,
 		       memslot->npages * sizeof(*memslot->arch.rmap));
+		spin_unlock(&kvm->mmu_lock);
 	}
 	srcu_read_unlock(&kvm->srcu, srcu_idx);
 }
arch/powerpc/kvm/book3s_hv.c +11 -4
index 083dcedba11ce..9595db30e6b87 100644
@@ -3813,12 +3813,15 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 /* Must be called with kvm->lock held and mmu_ready = 0 and no vcpus running */
 int kvmppc_switch_mmu_to_hpt(struct kvm *kvm)
 {
+	kvmppc_rmap_reset(kvm);
+	kvm->arch.process_table = 0;
+	/* Mutual exclusion with kvm_unmap_hva_range etc. */
+	spin_lock(&kvm->mmu_lock);
+	kvm->arch.radix = 0;
+	spin_unlock(&kvm->mmu_lock);
 	kvmppc_free_radix(kvm);
 	kvmppc_update_lpcr(kvm, LPCR_VPM1,
 			   LPCR_VPM1 | LPCR_UPRT | LPCR_GTSE | LPCR_HR);
-	kvmppc_rmap_reset(kvm);
-	kvm->arch.radix = 0;
-	kvm->arch.process_table = 0;
 	return 0;
 }
 
@@ -3831,10 +3834,14 @@ int kvmppc_switch_mmu_to_radix(struct kvm *kvm)
 	if (err)
 		return err;
 
+	kvmppc_rmap_reset(kvm);
+	/* Mutual exclusion with kvm_unmap_hva_range etc. */
+	spin_lock(&kvm->mmu_lock);
+	kvm->arch.radix = 1;
+	spin_unlock(&kvm->mmu_lock);
 	kvmppc_free_hpt(&kvm->arch.hpt);
 	kvmppc_update_lpcr(kvm, LPCR_UPRT | LPCR_GTSE | LPCR_HR,
 			   LPCR_VPM1 | LPCR_UPRT | LPCR_GTSE | LPCR_HR);
-	kvm->arch.radix = 1;
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 44/167 drm/amdgpu: validate user pitch alignment

In reply to Sasha Levin

From: Yu Zhao <[email protected]>

[ Upstream commit 89f23b6efef554766177bf51aa754bce14c3e7da ]

Userspace may request pitch alignment that is not supported by GPU. Some requests 32, but GPU ignores it and uses default 64 when cpp is
4. If GEM object is allocated based on the smaller alignment, GPU DMA will go out of bound.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +10 -0
index 686a26de50f91..6e67814d33e29 100644
@@ -527,6 +527,16 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
 	struct drm_gem_object *obj;
 	struct amdgpu_framebuffer *amdgpu_fb;
 	int ret;
+	struct amdgpu_device *adev = dev->dev_private;
+	int cpp = drm_format_plane_cpp(mode_cmd->pixel_format, 0);
+	int pitch = mode_cmd->pitches[0] / cpp;
+
+	pitch = amdgpu_align_pitch(adev, pitch, cpp, false);
+	if (mode_cmd->pitches[0] != pitch) {
+		DRM_DEBUG_KMS("Invalid pitch: expecting %d but got %d\n",
+			      pitch, mode_cmd->pitches[0]);
+		return ERR_PTR(-EINVAL);
+	}
 
 	obj = drm_gem_object_lookup(file_priv, mode_cmd->handles[0]);
 	if (obj ==  NULL) {
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 45/167 drm/amdgpu: validate user GEM object size

In reply to Sasha Levin

From: Yu Zhao <[email protected]>

[ Upstream commit c4a32b266da7bb702e60381ca0c35eaddbc89a6c ]

When creating frame buffer, userspace may request to attach to a previously allocated GEM object that is smaller than what GPU requires. Validation must be done to prevent out-of-bound DMA, otherwise it could be exploited to reveal sensitive data.

This fix is not done in a common code path because individual driver might have different requirement.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +8 -0
index 6e67814d33e29..1035a47f81c9c 100644
@@ -527,6 +527,7 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
 	struct drm_gem_object *obj;
 	struct amdgpu_framebuffer *amdgpu_fb;
 	int ret;
+	int height;
 	struct amdgpu_device *adev = dev->dev_private;
 	int cpp = drm_format_plane_cpp(mode_cmd->pixel_format, 0);
 	int pitch = mode_cmd->pitches[0] / cpp;
@@ -551,6 +552,13 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
 		return ERR_PTR(-EINVAL);
 	}
 
+	height = ALIGN(mode_cmd->height, 8);
+	if (obj->size < pitch * height) {
+		DRM_DEBUG_KMS("Invalid GEM size: expecting >= %d but got %zu\n",
+			      pitch * height, obj->size);
+		return ERR_PTR(-EINVAL);
+	}
+
 	amdgpu_fb = kzalloc(sizeof(*amdgpu_fb), GFP_KERNEL);
 	if (amdgpu_fb == NULL) {
 		drm_gem_object_put_unlocked(obj);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#58 lore raw

PATCH 49/167 ARC: show_regs: lockdep: re-enable preemption

In reply to Sasha Levin

From: Vineet Gupta <[email protected]>

[ Upstream commit f731a8e89f8c78985707c626680f3e24c7a60772 ]

signal handling core calls show_regs() with preemption disabled which on ARC takes mmap_sem for mm/vma access, causing lockdep splat.

| [ARCLinux]# ./segv-null-ptr
| potentially unexpected fatal signal 11.
| BUG: sleeping function called from invalid context at kernel/fork.c:1011
| in_atomic(): 1, irqs_disabled(): 0, pid: 70, name: segv-null-ptr
| no locks held by segv-null-ptr/70.
| CPU: 0 PID: 70 Comm: segv-null-ptr Not tainted 4.18.0+ #69
|
| Stack Trace:
|  arc_unwind_core+0xcc/0x100
|  ___might_sleep+0x17a/0x190
|  mmput+0x16/0xb8
|  show_regs+0x52/0x310
|  get_signal+0x5ee/0x610
|  do_signal+0x2c/0x218
|  resume_user_mode_begin+0x90/0xd8

Workaround by re-enabling preemption temporarily.

Note that the preemption disabling in core code around show_regs() was introduced by commit 3a9f84d354ce ("signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()")

to silence a differnt lockdep seen on x86 bakc in 2009.

Cc <stable at vger.kernel.org>
Signed-off-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/kernel/troubleshoot.c | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arc/kernel/troubleshoot.c +8 -0
index 5c6663321e873..215f515442e03 100644
@@ -179,6 +179,12 @@ void show_regs(struct pt_regs *regs)
 	struct task_struct *tsk = current;
 	struct callee_regs *cregs;
 
+	/*
+	 * generic code calls us with preemption disabled, but some calls
+	 * here could sleep, so re-enable to avoid lockdep splat
+	 */
+	preempt_enable();
+
 	print_task_path_n_nm(tsk);
 	show_regs_print_info(KERN_INFO);
 
@@ -221,6 +227,8 @@ void show_regs(struct pt_regs *regs)
 	cregs = (struct callee_regs *)current->thread.callee_reg;
 	if (cregs)
 		show_callee_regs(cregs);
+
+	preempt_disable();
 }
 
 void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 50/167 ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while handle_mm_fault

In reply to Sasha Levin

From: Vineet Gupta <[email protected]>

[ Upstream commit 4d447455e73b47c43dd35fcc38ed823d3182a474 ]

do_page_fault() forgot to relinquish mmap_sem if a signal came while handling handle_mm_fault() - due to say a ctl+c or oom etc. This would later cause a deadlock by acquiring it twice.

This came to light when running libc testsuite tst-tls3-malloc test but is likely also the cause for prior seen LTP failures. Using lockdep clearly showed what the issue was.

| # while true; do ./tst-tls3-malloc ; done
| Didn't expect signal from child: got `Segmentation fault'
| ^C
| ============================================
| WARNING: possible recursive locking detected
| 4.17.0+ #25 Not tainted
| --------------------------------------------
| tst-tls3-malloc/510 is trying to acquire lock:
| 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c
|
|but task is already holding lock:
|606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0
|
| other info that might help us debug this:
|  Possible unsafe locking scenario:
|
|       CPU0
|       ----
|  lock(&mm->mmap_sem);
|  lock(&mm->mmap_sem);
|
| *** DEADLOCK ***
|

------------------------------------------------------------
What the change does is not obvious (note to myself)

prior code was

| do_page_fault
|
|   down_read()		<-- lock taken
|   handle_mm_fault	<-- signal pending as this runs
|   if fatal_signal_pending
|       if VM_FAULT_ERROR
|           up_read
|       if user_mode
|          return	<-- lock still held, this was the BUG

New code

| do_page_fault
|
|   down_read()		<-- lock taken
|   handle_mm_fault	<-- signal pending as this runs
|   if fatal_signal_pending
|       if VM_FAULT_RETRY
|          return       <-- not same case as above, but still OK since
|                           core mm already relinq lock for FAULT_RETRY
|    ...
|
|   < Now falls through for bug case above >
|
|   up_read()		<-- lock relinquished
Cc stable at vger.kernel.org
Signed-off-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/mm/fault.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
arch/arc/mm/fault.c +9 -4
index db6913094be3c..f28db0b112a30 100644
@@ -143,12 +143,17 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	 */
 	fault = handle_mm_fault(vma, address, flags);
 
-	/* If Pagefault was interrupted by SIGKILL, exit page fault "early" */
 	if (unlikely(fatal_signal_pending(current))) {
-		if ((fault & VM_FAULT_ERROR) && !(fault & VM_FAULT_RETRY))
-			up_read(&mm->mmap_sem);
-		if (user_mode(regs))
+
+		/*
+		 * if fault retry, mmap_sem already relinquished by core mm
+		 * so OK to return to user mode (with signal handled first)
+		 */
+		if (fault & VM_FAULT_RETRY) {
+			if (!user_mode(regs))
+				goto no_context;
 			return;
+		}
 	}
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 55/167 arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64

In reply to Sasha Levin

From: Dmitry Voytik <[email protected]>

[ Upstream commit 26e2d7b03ea7ff254bf78305aa44dda62e70b78e ]

After commit ef05bcb60c1a, boot from USB drives is broken. Fix this problem by enabling usb-host regulators during boot time.

Fixes ef05bcb60c1a ("arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64")
---
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +2 -0
index c142169a58fc5..e9147e35b7396 100644
@@ -40,6 +40,7 @@
 		pinctrl-0 = <&usb30_host_drv>;
 		regulator-name = "vcc_host_5v";
 		regulator-always-on;
+		regulator-boot-on;
 		vin-supply = <&vcc_sys>;
 	};
 
@@ -50,6 +51,7 @@
 		pinctrl-0 = <&usb20_host_drv>;
 		regulator-name = "vcc_host1_5v";
 		regulator-always-on;
+		regulator-boot-on;
 		vin-supply = <&vcc_sys>;
 	};
 
Signature · 1 line
2.20.1
author maintainer
#69 lore raw

PATCH 60/167 drm/i915/ilk: Fix warning when reading emon_status with no output

In reply to Sasha Levin

From: José Roberto de Souza <[email protected]>

[ Upstream commit cab870b7fdf3c4be747d88de5248b28db7d4055e ]

When there is no output no one will hold a runtime_pm reference causing a warning when trying to read emom_status in debugfs.

[22.756480] ------------[ cut here ]------------
[22.756489] RPM wakelock ref not held during HW access
[22.756578] WARNING: CPU: 0 PID: 1058 at drivers/gpu/drm/i915/intel_drv.h:2104 gen5_read32+0x16b/0x1a0 [i915]
[22.756580] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me prime_numbers mei lpc_ich
[22.756595] CPU: 0 PID: 1058 Comm: debugfs_test Not tainted 4.20.0-rc1-CI-Trybot_3219+ #1
[22.756597] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[22.756634] RIP: 0010:gen5_read32+0x16b/0x1a0 [i915]
[22.756637] Code: a4 ea e0 0f 0b e9 d2 fe ff ff 80 3d a5 71 19 00 00 0f 85 d3 fe ff ff 48 c7 c7 48 d0 2d a0 c6 05 91 71 19 00 01 e8 35 a4 ea e0 <0f> 0b e9 b9 fe ff ff e8 69 c6 f2 e0 85 c0 75 92 48 c7 c2 78 d0 2d
[22.756639] RSP: 0018:ffffc90000f1fd38 EFLAGS: 00010282
[22.756642] RAX: 0000000000000000 RBX: ffff8801f7ab0000 RCX: 0000000000000006
[22.756643] RDX: 0000000000000006 RSI: ffffffff8212886a RDI: ffffffff820d6d57
[22.756645] RBP: 0000000000011020 R08: 0000000043e3d1a8 R09: 0000000000000000
[22.756647] R10: ffffc90000f1fd80 R11: 0000000000000000 R12: 0000000000000001
[22.756649] R13: ffff8801f7ab0068 R14: 0000000000000001 R15: ffff88020d53d188
[22.756651] FS:  00007f2878849980(0000) GS:ffff880213a00000(0000) knlGS:0000000000000000
[22.756653] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22.756655] CR2: 00005638deedf028 CR3: 0000000203292001 CR4: 00000000000206f0
[22.756657] Call Trace:
[22.756689]  i915_mch_val+0x1b/0x60 [i915]
[22.756721]  i915_emon_status+0x45/0xd0 [i915]
[22.756730]  seq_read+0xdb/0x3c0
[22.756736]  ? lockdep_hardirqs_off+0x94/0xd0
[22.756740]  ? __slab_free+0x24e/0x510
[22.756746]  full_proxy_read+0x52/0x90
[22.756752]  __vfs_read+0x31/0x170
[22.756759]  ? do_sys_open+0x13b/0x240
[22.756763]  ? rcu_read_lock_sched_held+0x6f/0x80
[22.756766]  vfs_read+0x9e/0x140
[22.756770]  ksys_read+0x50/0xc0
[22.756775]  do_syscall_64+0x55/0x190
[22.756781]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[22.756783] RIP: 0033:0x7f28781dc34e
[22.756786] Code: 00 00 00 00 48 8b 15 71 8c 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff c3 0f 1f 40 00 8b 05 ba d0 20 00 85 c0 75 16 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5a f3 c3 0f 1f 84 00 00 00 00 00 41 54 55 49
[22.756787] RSP: 002b:00007ffd33fa0d08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22.756790] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f28781dc34e
[22.756792] RDX: 0000000000000200 RSI: 00007ffd33fa0d50 RDI: 0000000000000008
[22.756794] RBP: 00007ffd33fa0f60 R08: 0000000000000000 R09: 0000000000000020
[22.756796] R10: 0000000000000000 R11: 0000000000000246 R12: 00005638de45c2c0
[22.756797] R13: 00007ffd33fa14b0 R14: 0000000000000000 R15: 0000000000000000
[22.756806] irq event stamp: 47950
[22.756811] hardirqs last  enabled at (47949): [<ffffffff810fba74>] vprintk_emit+0x124/0x320
[22.756813] hardirqs last disabled at (47950): [<ffffffff810019b0>] trace_hardirqs_off_thunk+0x1a/0x1c
[22.756816] softirqs last  enabled at (47518): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
[22.756820] softirqs last disabled at (47479): [<ffffffff8108df29>] irq_exit+0xa9/0xc0
[22.756858] WARNING: CPU: 0 PID: 1058 at drivers/gpu/drm/i915/intel_drv.h:2104 gen5_read32+0x16b/0x1a0 [i915]
[22.756860] ---[ end trace bf56fa7d6a3cbf7a ]
---
 drivers/gpu/drm/i915/i915_debugfs.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +4 -0
index f9ce35da4123e..e063e98d1e82e 100644
@@ -1788,6 +1788,8 @@ static int i915_emon_status(struct seq_file *m, void *unused)
 	if (!IS_GEN5(dev_priv))
 		return -ENODEV;
 
+	intel_runtime_pm_get(dev_priv);
+
 	ret = mutex_lock_interruptible(&dev->struct_mutex);
 	if (ret)
 		return ret;
@@ -1802,6 +1804,8 @@ static int i915_emon_status(struct seq_file *m, void *unused)
 	seq_printf(m, "GFX power: %ld\n", gfx);
 	seq_printf(m, "Total power: %ld\n", chipset + gfx);
 
+	intel_runtime_pm_put(dev_priv);
+
 	return 0;
 }
 
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#72 lore raw

PATCH 63/167 bcache: replace hard coded number with BUCKET_GC_GEN_MAX

In reply to Sasha Levin

From: Coly Li <[email protected]>

[ Upstream commit 149d0efada7777ad5a5242b095692af142f533d8 ]

In extents.c:bch_extent_bad(), number 96 is used as parameter to call btree_bug_on(). The purpose is to check whether stale gen value exceeds BUCKET_GC_GEN_MAX, so it is better to use macro BUCKET_GC_GEN_MAX to make the code more understandable.

---
 drivers/md/bcache/extents.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/bcache/extents.c +1 -1
index c809724e6571e..9560043666999 100644
@@ -553,7 +553,7 @@ static bool bch_extent_bad(struct btree_keys *bk, const struct bkey *k)
 	for (i = 0; i < KEY_PTRS(k); i++) {
 		stale = ptr_stale(b->c, k, i);
 
-		btree_bug_on(stale > 96, b,
+		btree_bug_on(stale > BUCKET_GC_GEN_MAX, b,
 			     "key too stale: %i, need_gc %u",
 			     stale, b->c->need_gc);
 
Signature · 1 line
2.20.1
author maintainer
#73 lore raw

PATCH 64/167 bcache: treat stale && dirty keys as bad keys

In reply to Sasha Levin

From: Tang Junhui <[email protected]>

[ Upstream commit 58ac323084ebf44f8470eeb8b82660f9d0ee3689 ]

Stale && dirty keys can be produced in the follow way:
After writeback in write_dirty_finish(), dirty keys k1 will replace by clean keys k2
==>ret = bch_btree_insert(dc->disk.c, &keys, NULL, &w->key); ==>btree_insert_fn(struct btree_op *b_op, struct btree *b) ==>static int bch_btree_insert_node(struct btree *b,
struct btree_op *op,
struct keylist *insert_keys,
atomic_t *journal_ref,
Then two steps:
A) update k1 to k2 in btree node memory; bch_btree_insert_keys(b, op, insert_keys, replace_key)
B) Write the bset(contains k2) to cache disk by a 30s delay work bch_btree_leaf_dirty(b, journal_ref).
But before the 30s delay work write the bset to cache device, these things happened:
A) GC works, and reclaim the bucket k2 point to;
B) Allocator works, and invalidate the bucket k2 point to, and increase the gen of the bucket, and place it into free_inc fifo;
C) Until now, the 30s delay work still does not finish work, so in the disk, the key still is k1, it is dirty and stale (its gen is smaller than the gen of the bucket). and then the machine power off suddenly happens;
D) When the machine power on again, after the btree reconstruction, the stale dirty key appear.

In bch_extent_bad(), when expensive_debug_checks is off, it would treat the dirty key as good even it is stale keys, and it would cause bellow probelms:
A) In read_dirty() it would cause machine crash:
BUG_ON(ptr_stale(dc->disk.c, &w->key, 0));
B) It could be worse when reads hits stale dirty keys, it would read old incorrect data.

This patch tolerate the existence of these stale && dirty keys, and treat them as bad key in bch_extent_bad().

(Coly Li: fix indent which was modified by sender's email client)

---
 drivers/md/bcache/extents.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/md/bcache/extents.c +7 -6
index 9560043666999..886710043025f 100644
@@ -538,6 +538,7 @@ static bool bch_extent_bad(struct btree_keys *bk, const struct bkey *k)
 {
 	struct btree *b = container_of(bk, struct btree, keys);
 	unsigned int i, stale;
+	char buf[80];
 
 	if (!KEY_PTRS(k) ||
 	    bch_extent_invalid(bk, k))
@@ -547,19 +548,19 @@ static bool bch_extent_bad(struct btree_keys *bk, const struct bkey *k)
 		if (!ptr_available(b->c, k, i))
 			return true;
 
-	if (!expensive_debug_checks(b->c) && KEY_DIRTY(k))
-		return false;
-
 	for (i = 0; i < KEY_PTRS(k); i++) {
 		stale = ptr_stale(b->c, k, i);
 
+		if (stale && KEY_DIRTY(k)) {
+			bch_extent_to_text(buf, sizeof(buf), k);
+			pr_info("stale dirty pointer, stale %u, key: %s",
+				stale, buf);
+		}
+
 		btree_bug_on(stale > BUCKET_GC_GEN_MAX, b,
 			     "key too stale: %i, need_gc %u",
 			     stale, b->c->need_gc);
 
-		btree_bug_on(stale && KEY_DIRTY(k) && KEY_SIZE(k),
-			     b, "stale dirty pointer");
-
 		if (stale)
 			return true;
 
Signature · 1 line
2.20.1
author maintainer
#79 lore raw

PATCH 67/167 dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant

In reply to Sasha Levin

From: Jonathan Bakker <[email protected]>

[ Upstream commit a9b0a2a7c19316588421b94946c8e2e5a84ac14e ]

Add information about new compatible for S5PV210

---
 .../devicetree/bindings/iio/adc/samsung,exynos-adc.txt        | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +3 -1
index 6c49db7f8ad25..a10c1f89037de 100644
@@ -11,7 +11,7 @@ New driver handles the following
 
 Required properties:
 - compatible:		Must be "samsung,exynos-adc-v1"
-				for exynos4412/5250 and s5pv210 controllers.
+				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
@@ -28,6 +28,8 @@ Required properties:
 				the ADC in s3c2443 and compatibles
 			Must be "samsung,s3c6410-adc" for
 				the ADC in s3c6410 and compatibles
+			Must be "samsung,s5pv210-adc" for
+				the ADC in s5pv210 and compatibles
 - reg:			List of ADC register address range
 			- The base address and range of ADC register
 			- The base address and range of ADC_PHY register (every
Signature · 1 line
2.20.1
author maintainer
#80 lore raw

PATCH 68/167 iio: adc: exynos-adc: Use proper number of channels for Exynos4x12

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 103cda6a3b8d2c10d5f8cd7abad118e9db8f4776 ]

Exynos4212 and Exynos4412 have only four ADC channels so using "samsung,exynos-adc-v1" compatible (for eight channels ADCv1) on them is wrong. Add a new compatible for Exynos4x12.

---
 .../bindings/iio/adc/samsung,exynos-adc.txt     |  4 +++-
 drivers/iio/adc/exynos_adc.c                    | 17 +++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +3 -1
index a10c1f89037de..e1fe02f3e3e9c 100644
@@ -11,11 +11,13 @@ New driver handles the following
 
 Required properties:
 - compatible:		Must be "samsung,exynos-adc-v1"
-				for exynos4412/5250 controllers.
+				for Exynos5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
 				controllers compatible with ADC of Exynos3250.
+			Must be "samsung,exynos4212-adc" for
+				controllers compatible with ADC of Exynos4212 and Exynos4412.
 			Must be "samsung,exynos7-adc" for
 				the ADC in Exynos7 and compatibles
 			Must be "samsung,s3c2410-adc" for
drivers/iio/adc/exynos_adc.c +17 -0
index 41da522fc6735..1ca2c4d39f878 100644
@@ -115,6 +115,7 @@
 #define MAX_ADC_V2_CHANNELS		10
 #define MAX_ADC_V1_CHANNELS		8
 #define MAX_EXYNOS3250_ADC_CHANNELS	2
+#define MAX_EXYNOS4212_ADC_CHANNELS	4
 #define MAX_S5PV210_ADC_CHANNELS	10
 
 /* Bit definitions common for ADC_V1 and ADC_V2 */
@@ -271,6 +272,19 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info,
 	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
 }
 
+/* Exynos4212 and 4412 is like ADCv1 but with four channels only */
+static const struct exynos_adc_data exynos4212_adc_data = {
+	.num_channels	= MAX_EXYNOS4212_ADC_CHANNELS,
+	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
+	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV1_PHY_OFFSET,
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_v1_start_conv,
+};
+
 static const struct exynos_adc_data exynos_adc_v1_data = {
 	.num_channels	= MAX_ADC_V1_CHANNELS,
 	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
@@ -492,6 +506,9 @@ static const struct of_device_id exynos_adc_match[] = {
 	}, {
 		.compatible = "samsung,s5pv210-adc",
 		.data = &exynos_adc_s5pv210_data,
+	}, {
+		.compatible = "samsung,exynos4212-adc",
+		.data = &exynos4212_adc_data,
 	}, {
 		.compatible = "samsung,exynos-adc-v1",
 		.data = &exynos_adc_v1_data,
Signature · 1 line
2.20.1
author maintainer
#82 lore raw

PATCH 70/167 drm/nouveau: Don't WARN_ON VCPI allocation failures

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit b513a18cf1d705bd04efd91c417e79e4938be093 ]

This is much louder then we want. VCPI allocation failures are quite normal, since they will happen if any part of the modesetting process is interrupted by removing the DP MST topology in question. So just print a debugging message on VCPI failures instead.

Fixes f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Cc Ben Skeggs <[email protected]>
Cc <[email protected]> # v4.10+
---
 drivers/gpu/drm/nouveau/dispnv50/disp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/dispnv50/disp.c +2 -1
index f889d41a281fa..5e01bfb69d7a3 100644
@@ -759,7 +759,8 @@ nv50_msto_enable(struct drm_encoder *encoder)
 
 	slots = drm_dp_find_vcpi_slots(&mstm->mgr, mstc->pbn);
 	r = drm_dp_mst_allocate_vcpi(&mstm->mgr, mstc->port, mstc->pbn, slots);
-	WARN_ON(!r);
+	if (!r)
+		DRM_DEBUG_KMS("Failed to allocate VCPI\n");
 
 	if (!mstm->links++)
 		nv50_outp_acquire(mstm->outp);
Signature · 6 lines
2.20.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
author maintainer
#86 lore raw

PATCH 74/167 spi: spi-gpio: fix SPI_CS_HIGH capability

In reply to Sasha Levin

From: Russell King <[email protected]>

[ Upstream commit b89fefda7d4e3a649129584d855be233c7465264 ]

spi-gpio is capable of dealing with active-high chip-selects. Unfortunately, commit 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") broke this by setting master->mode_bits, which overrides the setting in the spi-bitbang code. Fix this.

[Fixed a trivial conflict with SPI_3WIRE_HIZ support -- broonie]

Fixes 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support")
---
 drivers/spi/spi-gpio.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/spi/spi-gpio.c +1 -2
index 088772ebef9bd..77838d8fd9bb6 100644
@@ -410,7 +410,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		return status;
 
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	master->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL;
+	master->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL | SPI_CS_HIGH;
 	master->flags = master_flags;
 	master->bus_num = pdev->id;
 	/* The master needs to think there is a chipselect even if not connected */
@@ -437,7 +437,6 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
 	}
 	spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
-	spi_gpio->bitbang.flags = SPI_CS_HIGH;
 
 	status = spi_bitbang_start(&spi_gpio->bitbang);
 	if (status)
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 75/167 powerpc/kvm: Save and restore host AMR/IAMR/UAMOR

In reply to Sasha Levin

From: Michael Ellerman <[email protected]>

[ Upstream commit c3c7470c75566a077c8dc71dcf8f1948b8ddfab4 ]

When the hash MMU is active the AMR, IAMR and UAMOR are used for pkeys. The AMR is directly writable by user space, and the UAMOR masks those writes, meaning both registers are effectively user register state. The IAMR is used to create an execute only key.

Also we must maintain the value of at least the AMR when running in process context, so that any memory accesses done by the kernel on behalf of the process are correctly controlled by the AMR.

Although we are correctly switching all registers when going into a guest, on returning to the host we just write 0 into all regs, except on Power9 where we restore the IAMR correctly.

This could be observed by a user process if it writes the AMR, then runs a guest and we then return immediately to it without rescheduling. Because we have written 0 to the AMR that would have the effect of granting read/write permission to pages that the process was trying to protect.

In addition, when using the Radix MMU, the AMR can prevent inadvertent kernel access to userspace data, writing 0 to the AMR disables that protection.

So save and restore AMR, IAMR and UAMOR.

Fixes cf43d3b26452 ("powerpc: Enable pkey subsystem")
Cc [email protected] # v4.16+
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 26 ++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)
arch/powerpc/kvm/book3s_hv_rmhandlers.S +17 -9
index 1d14046124a01..5902a60f92268 100644
@@ -56,6 +56,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 #define STACK_SLOT_DAWR		(SFS-56)
 #define STACK_SLOT_DAWRX	(SFS-64)
 #define STACK_SLOT_HFSCR	(SFS-72)
+#define STACK_SLOT_AMR		(SFS-80)
+#define STACK_SLOT_UAMOR	(SFS-88)
 
 /*
  * Call kvmppc_hv_entry in real mode.
@@ -760,11 +762,9 @@ BEGIN_FTR_SECTION
 	mfspr	r5, SPRN_TIDR
 	mfspr	r6, SPRN_PSSCR
 	mfspr	r7, SPRN_PID
-	mfspr	r8, SPRN_IAMR
 	std	r5, STACK_SLOT_TID(r1)
 	std	r6, STACK_SLOT_PSSCR(r1)
 	std	r7, STACK_SLOT_PID(r1)
-	std	r8, STACK_SLOT_IAMR(r1)
 	mfspr	r5, SPRN_HFSCR
 	std	r5, STACK_SLOT_HFSCR(r1)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
@@ -772,11 +772,18 @@ BEGIN_FTR_SECTION
 	mfspr	r5, SPRN_CIABR
 	mfspr	r6, SPRN_DAWR
 	mfspr	r7, SPRN_DAWRX
+	mfspr	r8, SPRN_IAMR
 	std	r5, STACK_SLOT_CIABR(r1)
 	std	r6, STACK_SLOT_DAWR(r1)
 	std	r7, STACK_SLOT_DAWRX(r1)
+	std	r8, STACK_SLOT_IAMR(r1)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 
+	mfspr	r5, SPRN_AMR
+	std	r5, STACK_SLOT_AMR(r1)
+	mfspr	r6, SPRN_UAMOR
+	std	r6, STACK_SLOT_UAMOR(r1)
+
 BEGIN_FTR_SECTION
 	/* Set partition DABR */
 	/* Do this before re-enabling PMU to avoid P7 DABR corruption bug */
@@ -1713,22 +1720,25 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
 	mtspr	SPRN_PSPB, r0
 	mtspr	SPRN_WORT, r0
 BEGIN_FTR_SECTION
-	mtspr	SPRN_IAMR, r0
 	mtspr	SPRN_TCSCR, r0
 	/* Set MMCRS to 1<<31 to freeze and disable the SPMC counters */
 	li	r0, 1
 	sldi	r0, r0, 31
 	mtspr	SPRN_MMCRS, r0
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
-8:
 
-	/* Save and reset AMR and UAMOR before turning on the MMU */
+	/* Save and restore AMR, IAMR and UAMOR before turning on the MMU */
+	ld	r8, STACK_SLOT_IAMR(r1)
+	mtspr	SPRN_IAMR, r8
+
+8:	/* Power7 jumps back in here */
 	mfspr	r5,SPRN_AMR
 	mfspr	r6,SPRN_UAMOR
 	std	r5,VCPU_AMR(r9)
 	std	r6,VCPU_UAMOR(r9)
-	li	r6,0
-	mtspr	SPRN_AMR,r6
+	ld	r5,STACK_SLOT_AMR(r1)
+	ld	r6,STACK_SLOT_UAMOR(r1)
+	mtspr	SPRN_AMR, r5
 	mtspr	SPRN_UAMOR, r6
 
 	/* Switch DSCR back to host value */
@@ -1897,11 +1907,9 @@ BEGIN_FTR_SECTION
 	ld	r5, STACK_SLOT_TID(r1)
 	ld	r6, STACK_SLOT_PSSCR(r1)
 	ld	r7, STACK_SLOT_PID(r1)
-	ld	r8, STACK_SLOT_IAMR(r1)
 	mtspr	SPRN_TIDR, r5
 	mtspr	SPRN_PSSCR, r6
 	mtspr	SPRN_PID, r7
-	mtspr	SPRN_IAMR, r8
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 
 #ifdef CONFIG_PPC_RADIX_MMU
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 76/167 mmc: renesas_sdhi: Fix card initialization failure in high speed mode

In reply to Sasha Levin

From: Takeshi Saito <[email protected]>

[ Upstream commit d30ae056adb81e1d2b8b953efa74735a020b8e3b ]

This fixes card initialization failure in high speed mode.

If U-Boot uses SDR or HS200/400 mode before starting Linux and Linux DT does not enable SDR/HS200/HS400 mode, card initialization fails in high speed mode.

It is necessary to initialize SCC registers during card initialization phase. HW reset function is registered only for a port with either of SDR/HS200/HS400 properties in device tree. If SDR/HS200/HS400 properties are not present in device tree, SCC registers will not be reset. In SoC that support SCC registers, HW reset function should be registered regardless of the configuration of device tree.

Reproduction procedure:
- Use U-Boot that support MMC HS200/400 mode.
- Delete HS200/HS400 properties in device tree. (Delete mmc-hs200-1_8v and mmc-hs400-1_8v)
- MMC port works high speed mode and all commands fail.

---
 drivers/mmc/host/renesas_sdhi_core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/mmc/host/renesas_sdhi_core.c +7 -4
index 45baf5d9120e3..61f0faddfd889 100644
@@ -636,6 +636,13 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		host->ops.card_busy = renesas_sdhi_card_busy;
 		host->ops.start_signal_voltage_switch =
 			renesas_sdhi_start_signal_voltage_switch;
+
+		/* SDR and HS200/400 registers requires HW reset */
+		if (of_data && of_data->scc_offset) {
+			priv->scc_ctl = host->ctl + of_data->scc_offset;
+			host->mmc->caps |= MMC_CAP_HW_RESET;
+			host->hw_reset = renesas_sdhi_hw_reset;
+		}
 	}
 
 	/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
@@ -693,8 +700,6 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		const struct renesas_sdhi_scc *taps = of_data->taps;
 		bool hit = false;
 
-		host->mmc->caps |= MMC_CAP_HW_RESET;
-
 		for (i = 0; i < of_data->taps_num; i++) {
 			if (taps[i].clk_rate == 0 ||
 			    taps[i].clk_rate == host->mmc->f_max) {
@@ -707,12 +712,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		if (!hit)
 			dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
 
-		priv->scc_ctl = host->ctl + of_data->scc_offset;
 		host->init_tuning = renesas_sdhi_init_tuning;
 		host->prepare_tuning = renesas_sdhi_prepare_tuning;
 		host->select_tuning = renesas_sdhi_select_tuning;
 		host->check_scc_error = renesas_sdhi_check_scc_error;
-		host->hw_reset = renesas_sdhi_hw_reset;
 		host->prepare_hs400_tuning =
 			renesas_sdhi_prepare_hs400_tuning;
 		host->hs400_downgrade = renesas_sdhi_disable_scc;
Signature · 1 line
2.20.1
author maintainer
#99 lore raw

PATCH 87/167 drm/i915: Handle vm_mmap error during I915_GEM_MMAP ioctl with WC set

In reply to Sasha Levin

From: Joonas Lahtinen <[email protected]>

[ Upstream commit ebfb6977801da521d8d5d752d373a187e2a2b9b3 ]

Add err goto label and use it when VMA can't be established or changes underneath.

v2:
- Dropping Fixes: as it's indeed impossible to race an object to the error address. (Chris)
v3:
- Use IS_ERR_VALUE (Chris)

---
 drivers/gpu/drm/i915/i915_gem.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +10 -2
index e81abd468a15d..9634d3adb8d01 100644
@@ -1881,6 +1881,9 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 	addr = vm_mmap(obj->base.filp, 0, args->size,
 		       PROT_READ | PROT_WRITE, MAP_SHARED,
 		       args->offset);
+	if (IS_ERR_VALUE(addr))
+		goto err;
+
 	if (args->flags & I915_MMAP_WC) {
 		struct mm_struct *mm = current->mm;
 		struct vm_area_struct *vma;
@@ -1896,17 +1899,22 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 		else
 			addr = -ENOMEM;
 		up_write(&mm->mmap_sem);
+		if (IS_ERR_VALUE(addr))
+			goto err;
 
 		/* This may race, but that's ok, it only gets set */
 		WRITE_ONCE(obj->frontbuffer_ggtt_origin, ORIGIN_CPU);
 	}
 	i915_gem_object_put(obj);
-	if (IS_ERR((void *)addr))
-		return addr;
 
 	args->addr_ptr = (uint64_t) addr;
 
 	return 0;
+
+err:
+	i915_gem_object_put(obj);
+
+	return addr;
 }
 
 static unsigned int tile_row_pages(struct drm_i915_gem_object *obj)
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#100 lore raw

PATCH 88/167 drm/i915: Sanity check mmap length against object size

In reply to Sasha Levin

From: Chris Wilson <[email protected]>

[ Upstream commit 000c4f90e3f0194eef218ff2c6a8fd8ca1de4313 ]

We assumed that vm_mmap() would reject an attempt to mmap past the end of the filp (our object), but we were wrong.

Applications that tried to use the mmap beyond the end of the object would be greeted by a SIGBUS. After this patch, those applications will be told about the error on creating the mmap, rather than at a random moment on later access.

Testcase: igt/gem_mmap/bad-size

Cc Antonio Argenziano <[email protected]>
Cc Joonas Lahtinen <[email protected]>
Cc Tvrtko Ursulin <[email protected]>
(cherry picked from commit 794a11cb67201ad1bb61af510bb8460280feb3f3)
---
 drivers/gpu/drm/i915/i915_gem.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +9 -6
index 9634d3adb8d01..9372877100420 100644
@@ -1874,8 +1874,13 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 	 * pages from.
 	 */
 	if (!obj->base.filp) {
-		i915_gem_object_put(obj);
-		return -ENXIO;
+		addr = -ENXIO;
+		goto err;
+	}
+
+	if (range_overflows(args->offset, args->size, (u64)obj->base.size)) {
+		addr = -EINVAL;
+		goto err;
 	}
 
 	addr = vm_mmap(obj->base.filp, 0, args->size,
@@ -1889,8 +1894,8 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 		struct vm_area_struct *vma;
 
 		if (down_write_killable(&mm->mmap_sem)) {
-			i915_gem_object_put(obj);
-			return -EINTR;
+			addr = -EINTR;
+			goto err;
 		}
 		vma = find_vma(mm, addr);
 		if (vma && __vma_matches(vma, obj->base.filp, addr, args->size))
@@ -1908,12 +1913,10 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 	i915_gem_object_put(obj);
 
 	args->addr_ptr = (uint64_t) addr;
-
 	return 0;
 
 err:
 	i915_gem_object_put(obj);
-
 	return addr;
 }
 
Signature · 6 lines
2.20.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#102 lore raw

PATCH 90/167 arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's

In reply to Sasha Levin

From: Dinh Nguyen <[email protected]>

[ Upstream commit 8efd6365417a044db03009724ecc1a9521524913 ]

The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller.

Add the "altr,sysmgr-syscon" property to all gmac nodes.

This patch fixes:

[    0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found
[    0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data
---
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +3 -0
index 5089aa64088fc..9a1ea8a464057 100644
@@ -140,6 +140,7 @@
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
 			status = "disabled";
 		};
 
@@ -156,6 +157,7 @@
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
 			status = "disabled";
 		};
 
@@ -172,6 +174,7 @@
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
 			status = "disabled";
 		};
 
Signature · 1 line
2.20.1
author maintainer
#110 lore raw

PATCH 98/167 ARM: dts: qcom: ipq4019: fix PCI range

In reply to Sasha Levin

From: Mathias Kresin <[email protected]>

[ Upstream commit da89f500cb55fb3f19c4b399b46d8add0abbd4d6 ]

The PCI range is invalid and PCI attached devices doen't work.

---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/qcom-ipq4019.dtsi +1 -1
index 78db67337ed4a..2c3168d95a2d5 100644
@@ -387,7 +387,7 @@
 			#size-cells = <2>;
 
 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
-				  0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "msi";
Signature · 1 line
2.20.1
author maintainer
#111 lore raw

PATCH 99/167 ARM: dts: qcom: ipq4019: Fix MSI IRQ type

In reply to Sasha Levin

From: Niklas Cassel <[email protected]>

[ Upstream commit 97131f85c08e024df49480ed499aae8fb754067f ]

The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level triggered interrupt.

The msi_ctrl_int will be high for as long as any MSI status bit is set, thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the IRQ handler to keep getting called, as long as any MSI status bit is set.

A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has configured this IRQ incorrectly.

Not having the correct IRQ type defined will cause us to lose interrupts, which in turn causes timeouts in the PCIe endpoint drivers.

---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/qcom-ipq4019.dtsi +1 -1
index 2c3168d95a2d5..814ab7283228a 100644
@@ -389,7 +389,7 @@
 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
 				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
Signature · 1 line
2.20.1
author maintainer
#112 lore raw

PATCH 100/167 ARM: dts: qcom: ipq4019: enlarge PCIe BAR range

In reply to Sasha Levin

From: Christian Lamparter <[email protected]>

[ Upstream commit f3e35357cd460a8aeb48b8113dc4b761a7d5c828 ]

David Bauer reported that the VDSL modem (attached via PCIe) on his AVM Fritz!Box 7530 was complaining about not having enough space in the BAR. A closer inspection of the old qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed:

| qcom,pcie@80000 {
|	compatible = "qcom,msm_pcie";
|	reg = <0x80000 0x2000>,
|	      <0x99000 0x800>,
|	      <0x40000000 0xf1d>,
|	      <0x40000f20 0xa8>,
|	      <0x40100000 0x1000>,
|	      <0x40200000 0x100000>,
|	      <0x40300000 0xd00000>;
|	reg-names = "parf", "phy", "dm_core", "elbi",
|			"conf", "io", "bars";

Matching the reg-names with the listed reg leads to <0xd00000> as the size for the "bars".

---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/qcom-ipq4019.dtsi +2 -2
index 814ab7283228a..54d056b01bb51 100644
@@ -386,8 +386,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
-				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
+			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
+				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
Signature · 1 line
2.20.1
author maintainer
#113 lore raw

PATCH 101/167 dt-bindings: mmc: Add supports-cqe property

In reply to Sasha Levin

From: Sowjanya Komatineni <[email protected]>

[ Upstream commit c7fddbd5db5cffd10ed4d18efa20e36803d1899f ]

Add supports-cqe optional property for MMC hosts.

This property is used to identify the specific host controller supporting command queue.

---
 Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/mmc/mmc.txt +2 -0
index f5a0923b34ca1..cdbcfd3a4ff21 100644
@@ -62,6 +62,8 @@ Optional properties:
   be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay
   waiting for I/O signalling and card power supply to be stable, regardless of
   whether pwrseq-simple is used. Default to 10ms if no available.
+- supports-cqe : The presence of this property indicates that the corresponding
+  MMC host controller supports HW command queue feature.
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
Signature · 1 line
2.20.1
author maintainer
#114 lore raw

PATCH 102/167 dt-bindings: mmc: Add disable-cqe-dcmd property.

In reply to Sasha Levin

From: Christoph Muellner <[email protected]>

[ Upstream commit 28f22fb755ecf9f933f045bc0afdb8140641b01c ]

Add disable-cqe-dcmd as optional property for MMC hosts. This property allows to disable or not enable the direct command features of the command queue engine.

Fixes 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
---
 Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/mmc/mmc.txt +2 -0
index cdbcfd3a4ff21..c269dbe384fea 100644
@@ -64,6 +64,8 @@ Optional properties:
   whether pwrseq-simple is used. Default to 10ms if no available.
 - supports-cqe : The presence of this property indicates that the corresponding
   MMC host controller supports HW command queue feature.
+- disable-cqe-dcmd: This property indicates that the MMC controller's command
+  queue engine (CQE) does not support direct commands (DCMDs).
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
Signature · 1 line
2.20.1
author maintainer
#116 lore raw

PATCH 104/167 PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit e0547c81bfcfad01cbbfa93a5e66bb98ab932f80 ]

On ThinkPad P50 SKUs with an Nvidia Quadro M1000M instead of the M2000M variant, the BIOS does not always reset the secondary Nvidia GPU during reboot if the laptop is configured in Hybrid Graphics mode. The reason is unknown, but the following steps and possibly a good bit of patience will reproduce the issue:

1. Boot up the laptop normally in Hybrid Graphics mode
2. Make sure nouveau is loaded and that the GPU is awake
3. Allow the Nvidia GPU to runtime suspend itself after being idle
4. Reboot the machine, the more sudden the better (e.g. sysrq-b may help)
5. If nouveau loads up properly, reboot the machine again and go back to step 2 until you reproduce the issue

This results in some very strange behavior: the GPU will be left in exactly the same state it was in when the previously booted kernel started the reboot. This has all sorts of bad side effects: for starters, this completely breaks nouveau starting with a mysterious EVO channel failure that happens well before we've actually used the EVO channel for anything:

nouveau 0000:01:00.0: disp: chid 0 mthd 0000 data 00000400 00001000 00000002

This causes a timeout trying to bring up the GR ctx:

nouveau 0000:01:00.0: timeout

  WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf100.c:1547 gf100_grctx_generate+0x7b2/0x850 [nouveau]
  Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET82W (1.55 ) 12/18/2018
  Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
  ...
  nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1)
  nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1)
  nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000008000 engine 00 [GR] client 15 [HUB/SCC_NB] reason c4 [] on channel -1 [0000000000 unknown]

The GPU never manages to recover. Booting without loading nouveau causes issues as well, since the GPU starts sending spurious interrupts that cause other device's IRQs to get disabled by the kernel:

irq 16: nobody cared (try booting with the "irqpoll" option)
...
handlers:
[<000000007faa9e99>] i801_isr [i2c_i801]
Disabling IRQ #16
...
serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
i801_smbus 0000:00:1f.4: Timeout waiting for interrupt!
i801_smbus 0000:00:1f.4: Transaction timeout
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-110). i801_smbus 0000:00:1f.4: Timeout waiting for interrupt!
i801_smbus 0000:00:1f.4: Transaction timeout
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!

This causes the touchpad and sometimes other things to get disabled.

Since this happens without nouveau, we can't fix this problem from nouveau itself.

Add a PCI quirk for the specific P50 variant of this GPU. Make sure the GPU is advertising NoReset- so we don't reset the GPU when the machine is in Dedicated graphics mode (where the GPU being initialized by the BIOS is normal and expected). Map the GPU MMIO space and read the magic 0x2240c register, which will have bit 1 set if the device was POSTed during a previous boot. Once we've confirmed all of this, reset the GPU and re-disable it - bringing it back to a healthy state.

---
 drivers/pci/quirks.c | 58 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
drivers/pci/quirks.c +58 -0
index 6cda8b7ecc821..311f8a33e62ff 100644
@@ -5116,3 +5116,61 @@ SWITCHTEC_QUIRK(0x8573);  /* PFXI 48XG3 */
 SWITCHTEC_QUIRK(0x8574);  /* PFXI 64XG3 */
 SWITCHTEC_QUIRK(0x8575);  /* PFXI 80XG3 */
 SWITCHTEC_QUIRK(0x8576);  /* PFXI 96XG3 */
+
+/*
+ * On Lenovo Thinkpad P50 SKUs with a Nvidia Quadro M1000M, the BIOS does
+ * not always reset the secondary Nvidia GPU between reboots if the system
+ * is configured to use Hybrid Graphics mode.  This results in the GPU
+ * being left in whatever state it was in during the *previous* boot, which
+ * causes spurious interrupts from the GPU, which in turn causes us to
+ * disable the wrong IRQ and end up breaking the touchpad.  Unsurprisingly,
+ * this also completely breaks nouveau.
+ *
+ * Luckily, it seems a simple reset of the Nvidia GPU brings it back to a
+ * clean state and fixes all these issues.
+ *
+ * When the machine is configured in Dedicated display mode, the issue
+ * doesn't occur.  Fortunately the GPU advertises NoReset+ when in this
+ * mode, so we can detect that and avoid resetting it.
+ */
+static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev)
+{
+	void __iomem *map;
+	int ret;
+
+	if (pdev->subsystem_vendor != PCI_VENDOR_ID_LENOVO ||
+	    pdev->subsystem_device != 0x222e ||
+	    !pdev->reset_fn)
+		return;
+
+	if (pci_enable_device_mem(pdev))
+		return;
+
+	/*
+	 * Based on nvkm_device_ctor() in
+	 * drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
+	 */
+	map = pci_iomap(pdev, 0, 0x23000);
+	if (!map) {
+		pci_err(pdev, "Can't map MMIO space\n");
+		goto out_disable;
+	}
+
+	/*
+	 * Make sure the GPU looks like it's been POSTed before resetting
+	 * it.
+	 */
+	if (ioread32(map + 0x2240c) & 0x2) {
+		pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n");
+		ret = pci_reset_function(pdev);
+		if (ret < 0)
+			pci_err(pdev, "Failed to reset GPU: %d\n", ret);
+	}
+
+	iounmap(map);
+out_disable:
+	pci_disable_device(pdev);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, 0x13b1,
+			      PCI_CLASS_DISPLAY_VGA, 8,
+			      quirk_reset_lenovo_thinkpad_p50_nvgpu);
Signature · 6 lines
2.20.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
author maintainer
#119 lore raw

PATCH 107/167 mmc: sdhci-pci: Add support for Intel CML

In reply to Sasha Levin

From: Adrian Hunter <[email protected]>

[ Upstream commit 765c59675ab571caf7ada456bbfd23a73136b535 ]

Add PCI Ids for Intel CML.

---
 drivers/mmc/host/sdhci-pci-core.c | 2 ++
 drivers/mmc/host/sdhci-pci.h      | 2 ++
 2 files changed, 4 insertions(+)
drivers/mmc/host/sdhci-pci-core.c +2 -0
index c4115bae5db18..71794391f48fa 100644
@@ -1577,6 +1577,8 @@ static const struct pci_device_id pci_ids[] = {
 	SDHCI_PCI_DEVICE(INTEL, CNPH_SD,   intel_byt_sd),
 	SDHCI_PCI_DEVICE(INTEL, ICP_EMMC,  intel_glk_emmc),
 	SDHCI_PCI_DEVICE(INTEL, ICP_SD,    intel_byt_sd),
+	SDHCI_PCI_DEVICE(INTEL, CML_EMMC,  intel_glk_emmc),
+	SDHCI_PCI_DEVICE(INTEL, CML_SD,    intel_byt_sd),
 	SDHCI_PCI_DEVICE(O2, 8120,     o2),
 	SDHCI_PCI_DEVICE(O2, 8220,     o2),
 	SDHCI_PCI_DEVICE(O2, 8221,     o2),
drivers/mmc/host/sdhci-pci.h +2 -0
index 2ef0bdca91974..6f04a62b2998e 100644
@@ -50,6 +50,8 @@
 #define PCI_DEVICE_ID_INTEL_CNPH_SD	0xa375
 #define PCI_DEVICE_ID_INTEL_ICP_EMMC	0x34c4
 #define PCI_DEVICE_ID_INTEL_ICP_SD	0x34f8
+#define PCI_DEVICE_ID_INTEL_CML_EMMC	0x02c4
+#define PCI_DEVICE_ID_INTEL_CML_SD	0x02f5
 
 #define PCI_DEVICE_ID_SYSKONNECT_8000	0x8000
 #define PCI_DEVICE_ID_VIA_95D0		0x95d0
Signature · 1 line
2.20.1
author maintainer
#123 lore raw

PATCH 111/167 signal/arc: Use force_sig_fault where appropriate

In reply to Sasha Levin

From: "Eric W. Biederman" <[email protected]>

[ Upstream commit 15773ae938d8d93d982461990bebad6e1d7a1830 ]

Acked-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by "Eric W. Biederman" <ebiederm at xmission.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/mm/fault.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
arch/arc/mm/fault.c +5 -15
index f28db0b112a30..a0366f9dca051 100644
@@ -66,14 +66,12 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	siginfo_t info;
+	int si_code;
 	int ret;
 	vm_fault_t fault;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */
 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
-	clear_siginfo(&info);
-
 	/*
 	 * We fault-in kernel-space virtual memory on-demand. The
 	 * 'reference' page table is init_mm.pgd.
@@ -91,7 +89,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 			return;
 	}
 
-	info.si_code = SEGV_MAPERR;
+	si_code = SEGV_MAPERR;
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -119,7 +117,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	 * we can handle it..
 	 */
 good_area:
-	info.si_code = SEGV_ACCERR;
+	si_code = SEGV_ACCERR;
 
 	/* Handle protection violation, execute on heap or stack */
 
@@ -204,11 +202,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	/* User mode accesses just cause a SIGSEGV */
 	if (user_mode(regs)) {
 		tsk->thread.fault_address = address;
-		info.si_signo = SIGSEGV;
-		info.si_errno = 0;
-		/* info.si_code has been set above */
-		info.si_addr = (void __user *)address;
-		force_sig_info(SIGSEGV, &info, tsk);
+		force_sig_fault(SIGSEGV, si_code, (void __user *)address, tsk);
 		return;
 	}
 
@@ -243,9 +237,5 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 		goto no_context;
 
 	tsk->thread.fault_address = address;
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *)address;
-	force_sig_info(SIGBUS, &info, tsk);
+	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address, tsk);
 }
Signature · 1 line
2.20.1
author maintainer
#127 lore raw

PATCH 112/167 ARC: mm: fix uninitialised signal code in do_page_fault

In reply to Sasha Levin

From: Eugeniy Paltsev <[email protected]>

[ Upstream commit 121e38e5acdc8e1e4cdb750fcdcc72f94e420968 ]

Commit 15773ae938d8 ("signal/arc: Use force_sig_fault where appropriate") introduced undefined behaviour by leaving si_code unitiailized and leaking random kernel values to user space.

Fixes 15773ae938d8 ("signal/arc: Use force_sig_fault where appropriate")
Signed-off-by Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
Signed-off-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/mm/fault.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arc/mm/fault.c +1 -1
index a0366f9dca051..535cf18e8bf2c 100644
@@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	int si_code;
+	int si_code = 0;
 	int ret;
 	vm_fault_t fault;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */
Signature · 1 line
2.20.1
author maintainer
#128 lore raw

PATCH 113/167 ARC: mm: SIGSEGV userspace trying to access kernel virtual memory

In reply to Sasha Levin

From: Eugeniy Paltsev <[email protected]>

[ Upstream commit a8c715b4dd73c26a81a9cc8dc792aa715d8b4bb2 ]

As of today if userspace process tries to access a kernel virtual addres (0x7000_0000 to 0x7ffff_ffff) such that a legit kernel mapping already exists, that process hangs instead of being killed with SIGSEGV

Fix that by ensuring that do_page_fault() handles kenrel vaddr only if in kernel mode.

And given this, we can also simplify the code a bit. Now a vmalloc fault implies kernel mode so its failure (for some reason) can reuse the @no_context label and we can remove @bad_area_nosemaphore.

Reproduce user test for original problem:

------------------------>8-----------------
#include <stdlib.h>
#include <stdint.h>

int main(int argc, char *argv[])
{
volatile uint32_t temp;

temp = *(uint32_t *)(0x70000000);
}
------------------------>8-----------------

Cc <stable at vger.kernel.org>
Signed-off-by Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
Signed-off-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/mm/fault.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
arch/arc/mm/fault.c +3 -6
index 535cf18e8bf2c..4e8143de32e70 100644
@@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	int si_code = 0;
+	int si_code = SEGV_MAPERR;
 	int ret;
 	vm_fault_t fault;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */
@@ -81,16 +81,14 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
-	if (address >= VMALLOC_START) {
+	if (address >= VMALLOC_START && !user_mode(regs)) {
 		ret = handle_kernel_vaddr_fault(address);
 		if (unlikely(ret))
-			goto bad_area_nosemaphore;
+			goto no_context;
 		else
 			return;
 	}
 
-	si_code = SEGV_MAPERR;
-
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -198,7 +196,6 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 bad_area:
 	up_read(&mm->mmap_sem);
 
-bad_area_nosemaphore:
 	/* User mode accesses just cause a SIGSEGV */
 	if (user_mode(regs)) {
 		tsk->thread.fault_address = address;
Signature · 1 line
2.20.1
author maintainer
#129 lore raw

PATCH 114/167 drm/amdkfd: Add missing Polaris10 ID

In reply to Sasha Levin

From: Kent Russell <[email protected]>

[ Upstream commit 0a5a9c276c335870a1cecc4f02b76d6d6f663c8b ]

This was added to amdgpu but was missed in amdkfd

---
 drivers/gpu/drm/amd/amdkfd/kfd_device.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdkfd/kfd_device.c +1 -0
index 5aba50f63ac6f..938d0053a8208 100644
@@ -310,6 +310,7 @@ static const struct kfd_deviceid supported_devices[] = {
 	{ 0x67CF, &polaris10_device_info },	/* Polaris10 */
 	{ 0x67D0, &polaris10_vf_device_info },	/* Polaris10 vf*/
 	{ 0x67DF, &polaris10_device_info },	/* Polaris10 */
+	{ 0x6FDF, &polaris10_device_info },	/* Polaris10 */
 	{ 0x67E0, &polaris11_device_info },	/* Polaris11 */
 	{ 0x67E1, &polaris11_device_info },	/* Polaris11 */
 	{ 0x67E3, &polaris11_device_info },	/* Polaris11 */
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#131 lore raw

PATCH 116/167 drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)

In reply to Sasha Levin

From: Louis Li <[email protected]>

[ Upstream commit ce0e22f5d886d1b56c7ab4347c45b9ac5fcc058d ]

[What]
vce ring test fails consistently during resume in s3 cycle, due to
mismatch read & write pointers.
On debug/analysis its found that rptr to be compared is not being
correctly updated/read, which leads to this failure.
Below is the failure signature:
[drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed [drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110 [drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110).

[How]
fetch rptr appropriately, meaning move its read location further down in the code flow.
With this patch applied the s3 failure is no more seen for >5k s3 cycles, which otherwise is pretty consistent.

V2: remove reduntant fetch of rptr

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +4 -1
index 5f3f540738187..17862b9ecccd7 100644
@@ -1070,7 +1070,7 @@ void amdgpu_vce_ring_emit_fence(struct amdgpu_ring *ring, u64 addr, u64 seq,
 int amdgpu_vce_ring_test_ring(struct amdgpu_ring *ring)
 {
 	struct amdgpu_device *adev = ring->adev;
-	uint32_t rptr = amdgpu_ring_get_rptr(ring);
+	uint32_t rptr;
 	unsigned i;
 	int r, timeout = adev->usec_timeout;
 
@@ -1084,6 +1084,9 @@ int amdgpu_vce_ring_test_ring(struct amdgpu_ring *ring)
 			  ring->idx, r);
 		return r;
 	}
+
+	rptr = amdgpu_ring_get_rptr(ring);
+
 	amdgpu_ring_write(ring, VCE_CMD_END);
 	amdgpu_ring_commit(ring);
 
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#132 lore raw

PATCH 117/167 drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc

In reply to Sasha Levin

From: Shirish S <[email protected]>

[ Upstream commit 517b91f4cde3043d77b2178548473e8545ef07cb ]

[What]
readptr read always returns zero, since most likely these blocks are either power or clock gated.

[How]
fetch rptr after amdgpu_ring_alloc() which informs the power management code that the block is about to be used and hence the gating is turned off.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c | 5 ++++-
 drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c   | 5 ++++-
 drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c   | 5 ++++-
 3 files changed, 12 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +4 -1
index 400fc74bbae27..205e683fb9206 100644
@@ -431,7 +431,7 @@ int amdgpu_vcn_dec_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 int amdgpu_vcn_enc_ring_test_ring(struct amdgpu_ring *ring)
 {
 	struct amdgpu_device *adev = ring->adev;
-	uint32_t rptr = amdgpu_ring_get_rptr(ring);
+	uint32_t rptr;
 	unsigned i;
 	int r;
 
@@ -441,6 +441,9 @@ int amdgpu_vcn_enc_ring_test_ring(struct amdgpu_ring *ring)
 			  ring->idx, r);
 		return r;
 	}
+
+	rptr = amdgpu_ring_get_rptr(ring);
+
 	amdgpu_ring_write(ring, VCN_ENC_CMD_END);
 	amdgpu_ring_commit(ring);
 
drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c +4 -1
index d4070839ac809..80613a74df420 100644
@@ -170,7 +170,7 @@ static void uvd_v6_0_enc_ring_set_wptr(struct amdgpu_ring *ring)
 static int uvd_v6_0_enc_ring_test_ring(struct amdgpu_ring *ring)
 {
 	struct amdgpu_device *adev = ring->adev;
-	uint32_t rptr = amdgpu_ring_get_rptr(ring);
+	uint32_t rptr;
 	unsigned i;
 	int r;
 
@@ -180,6 +180,9 @@ static int uvd_v6_0_enc_ring_test_ring(struct amdgpu_ring *ring)
 			  ring->idx, r);
 		return r;
 	}
+
+	rptr = amdgpu_ring_get_rptr(ring);
+
 	amdgpu_ring_write(ring, HEVC_ENC_CMD_END);
 	amdgpu_ring_commit(ring);
 
drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c +4 -1
index 057151b17b456..ce16b8329af04 100644
@@ -175,7 +175,7 @@ static void uvd_v7_0_enc_ring_set_wptr(struct amdgpu_ring *ring)
 static int uvd_v7_0_enc_ring_test_ring(struct amdgpu_ring *ring)
 {
 	struct amdgpu_device *adev = ring->adev;
-	uint32_t rptr = amdgpu_ring_get_rptr(ring);
+	uint32_t rptr;
 	unsigned i;
 	int r;
 
@@ -188,6 +188,9 @@ static int uvd_v7_0_enc_ring_test_ring(struct amdgpu_ring *ring)
 			  ring->me, ring->idx, r);
 		return r;
 	}
+
+	rptr = amdgpu_ring_get_rptr(ring);
+
 	amdgpu_ring_write(ring, HEVC_ENC_CMD_END);
 	amdgpu_ring_commit(ring);
 
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#135 lore raw

PATCH 120/167 clk: tegra: Fix maximum audio sync clock for Tegra124/210

In reply to Sasha Levin

From: Jon Hunter <[email protected]>

[ Upstream commit 845d782d91448e0fbca686bca2cc9f9c2a9ba3e7 ]

The maximum frequency supported for I2S on Tegra124 and Tegra210 is 24.576MHz (as stated in the Tegra TK1 data sheet for Tegra124 and the Jetson TX1 module data sheet for Tegra210). However, the maximum I2S frequency is limited to 24MHz because that is the maximum frequency of the audio sync clock. Increase the maximum audio sync clock frequency to 24.576MHz for Tegra124 and Tegra210 in order to support 24.576MHz for I2S.

Update the tegra_clk_register_sync_source() function so that it does not set the initial rate for the sync clocks and use the clock init tables to set the initial rate instead.

---
 drivers/clk/tegra/clk-audio-sync.c  | 3 +--
 drivers/clk/tegra/clk-tegra-audio.c | 7 ++-----
 drivers/clk/tegra/clk-tegra114.c    | 9 ++++++++-
 drivers/clk/tegra/clk-tegra124.c    | 9 ++++++++-
 drivers/clk/tegra/clk-tegra210.c    | 9 ++++++++-
 drivers/clk/tegra/clk-tegra30.c     | 9 ++++++++-
 drivers/clk/tegra/clk.h             | 4 ++--
 7 files changed, 37 insertions(+), 13 deletions(-)
drivers/clk/tegra/clk-audio-sync.c +1 -2
index 92d04ce2dee6b..53cdc0ec40f33 100644
@@ -55,7 +55,7 @@ const struct clk_ops tegra_clk_sync_source_ops = {
 };
 
 struct clk *tegra_clk_register_sync_source(const char *name,
-		unsigned long rate, unsigned long max_rate)
+					   unsigned long max_rate)
 {
 	struct tegra_clk_sync_source *sync;
 	struct clk_init_data init;
@@ -67,7 +67,6 @@ struct clk *tegra_clk_register_sync_source(const char *name,
 		return ERR_PTR(-ENOMEM);
 	}
 
-	sync->rate = rate;
 	sync->max_rate = max_rate;
 
 	init.ops = &tegra_clk_sync_source_ops;
drivers/clk/tegra/clk-tegra-audio.c +2 -5
index b37cae7af26da..02dd6487d855d 100644
@@ -49,8 +49,6 @@ struct tegra_sync_source_initdata {
 #define SYNC(_name) \
 	{\
 		.name		= #_name,\
-		.rate		= 24000000,\
-		.max_rate	= 24000000,\
 		.clk_id		= tegra_clk_ ## _name,\
 	}
 
@@ -176,7 +174,7 @@ static void __init tegra_audio_sync_clk_init(void __iomem *clk_base,
 void __init tegra_audio_clk_init(void __iomem *clk_base,
 			void __iomem *pmc_base, struct tegra_clk *tegra_clks,
 			struct tegra_audio_clk_info *audio_info,
-			unsigned int num_plls)
+			unsigned int num_plls, unsigned long sync_max_rate)
 {
 	struct clk *clk;
 	struct clk **dt_clk;
@@ -221,8 +219,7 @@ void __init tegra_audio_clk_init(void __iomem *clk_base,
 		if (!dt_clk)
 			continue;
 
-		clk = tegra_clk_register_sync_source(data->name,
-					data->rate, data->max_rate);
+		clk = tegra_clk_register_sync_source(data->name, sync_max_rate);
 		*dt_clk = clk;
 	}
 
drivers/clk/tegra/clk-tegra114.c +8 -1
index 1824f014202b0..625d110913308 100644
@@ -1190,6 +1190,13 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0 },
 	{ TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0 },
 	{ TEGRA114_CLK_VDE, TEGRA114_CLK_CLK_MAX, 600000000, 0 },
+	{ TEGRA114_CLK_SPDIF_IN_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA114_CLK_I2S0_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA114_CLK_I2S1_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA114_CLK_I2S2_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA114_CLK_I2S3_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA114_CLK_I2S4_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA114_CLK_VIMCLK_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
 	/* must be the last entry */
 	{ TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0 },
 };
@@ -1362,7 +1369,7 @@ static void __init tegra114_clock_init(struct device_node *np)
 	tegra114_periph_clk_init(clk_base, pmc_base);
 	tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks,
 			     tegra114_audio_plls,
-			     ARRAY_SIZE(tegra114_audio_plls));
+			     ARRAY_SIZE(tegra114_audio_plls), 24000000);
 	tegra_pmc_clk_init(pmc_base, tegra114_clks);
 	tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks,
 					&pll_x_params);
drivers/clk/tegra/clk-tegra124.c +8 -1
index b6cf28ca2ed29..df0018f7bf7ed 100644
@@ -1291,6 +1291,13 @@ static struct tegra_clk_init_table common_init_table[] __initdata = {
 	{ TEGRA124_CLK_CSITE, TEGRA124_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA124_CLK_TSENSOR, TEGRA124_CLK_CLK_M, 400000, 0 },
 	{ TEGRA124_CLK_VIC03, TEGRA124_CLK_PLL_C3, 0, 0 },
+	{ TEGRA124_CLK_SPDIF_IN_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA124_CLK_I2S0_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA124_CLK_I2S1_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA124_CLK_I2S2_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA124_CLK_I2S3_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA124_CLK_I2S4_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA124_CLK_VIMCLK_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
 	/* must be the last entry */
 	{ TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0 },
 };
@@ -1455,7 +1462,7 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np)
 	tegra124_periph_clk_init(clk_base, pmc_base);
 	tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks,
 			     tegra124_audio_plls,
-			     ARRAY_SIZE(tegra124_audio_plls));
+			     ARRAY_SIZE(tegra124_audio_plls), 24576000);
 	tegra_pmc_clk_init(pmc_base, tegra124_clks);
 
 	/* For Tegra124 & Tegra132, PLLD is the only source for DSIA & DSIB */
drivers/clk/tegra/clk-tegra210.c +8 -1
index 4e1bc23c98655..f58480fe17674 100644
@@ -3369,6 +3369,13 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_SOC_THERM, TEGRA210_CLK_PLL_P, 51000000, 0 },
 	{ TEGRA210_CLK_CCLK_G, TEGRA210_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA210_CLK_PLL_U_OUT2, TEGRA210_CLK_CLK_MAX, 60000000, 1 },
+	{ TEGRA210_CLK_SPDIF_IN_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_I2S0_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_I2S1_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_I2S2_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_I2S3_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_I2S4_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_VIMCLK_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
 	/* This MUST be the last entry. */
 	{ TEGRA210_CLK_CLK_MAX, TEGRA210_CLK_CLK_MAX, 0, 0 },
 };
@@ -3562,7 +3569,7 @@ static void __init tegra210_clock_init(struct device_node *np)
 	tegra210_periph_clk_init(clk_base, pmc_base);
 	tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks,
 			     tegra210_audio_plls,
-			     ARRAY_SIZE(tegra210_audio_plls));
+			     ARRAY_SIZE(tegra210_audio_plls), 24576000);
 	tegra_pmc_clk_init(pmc_base, tegra210_clks);
 
 	/* For Tegra210, PLLD is the only source for DSIA & DSIB */
drivers/clk/tegra/clk-tegra30.c +8 -1
index acfe661b2ae72..e0aaecd98fbff 100644
@@ -1267,6 +1267,13 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 },
 	{ TEGRA30_CLK_VDE, TEGRA30_CLK_CLK_MAX, 600000000, 0 },
+	{ TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_I2S2_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_I2S3_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_I2S4_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_VIMCLK_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	/* must be the last entry */
 	{ TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 },
 };
@@ -1344,7 +1351,7 @@ static void __init tegra30_clock_init(struct device_node *np)
 	tegra30_periph_clk_init();
 	tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks,
 			     tegra30_audio_plls,
-			     ARRAY_SIZE(tegra30_audio_plls));
+			     ARRAY_SIZE(tegra30_audio_plls), 24000000);
 	tegra_pmc_clk_init(pmc_base, tegra30_clks);
 
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);
drivers/clk/tegra/clk.h +2 -2
index d2c3a010f8e9b..09bccbb9640c4 100644
@@ -41,7 +41,7 @@ extern const struct clk_ops tegra_clk_sync_source_ops;
 extern int *periph_clk_enb_refcnt;
 
 struct clk *tegra_clk_register_sync_source(const char *name,
-		unsigned long fixed_rate, unsigned long max_rate);
+					   unsigned long max_rate);
 
 /**
  * struct tegra_clk_frac_div - fractional divider clock
@@ -796,7 +796,7 @@ void tegra_register_devclks(struct tegra_devclk *dev_clks, int num);
 void tegra_audio_clk_init(void __iomem *clk_base,
 			void __iomem *pmc_base, struct tegra_clk *tegra_clks,
 			struct tegra_audio_clk_info *audio_info,
-			unsigned int num_plls);
+			unsigned int num_plls, unsigned long sync_max_rate);
 
 void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base,
 			struct tegra_clk *tegra_clks,
Signature · 1 line
2.20.1
author maintainer
#136 lore raw

PATCH 121/167 clk: tegra210: Fix default rates for HDA clocks

In reply to Sasha Levin

From: Jon Hunter <[email protected]>

[ Upstream commit 9caec6620f25b6d15646bbdb93062c872ba3b56f ]

Currently the default clock rates for the HDA and HDA2CODEC_2X clocks are both 19.2MHz. However, the default rates for these clocks should actually be 51MHz and 48MHz, respectively. The current clock settings results in a distorted output during audio playback. Correct the default clock rates for these clocks by specifying them in the clock init table for Tegra210.

---
 drivers/clk/tegra/clk-tegra210.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/tegra/clk-tegra210.c +2 -0
index f58480fe17674..080bfa24863ee 100644
@@ -3376,6 +3376,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_I2S3_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
 	{ TEGRA210_CLK_I2S4_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
 	{ TEGRA210_CLK_VIMCLK_SYNC, TEGRA210_CLK_CLK_MAX, 24576000, 0 },
+	{ TEGRA210_CLK_HDA, TEGRA210_CLK_PLL_P, 51000000, 0 },
+	{ TEGRA210_CLK_HDA2CODEC_2X, TEGRA210_CLK_PLL_P, 48000000, 0 },
 	/* This MUST be the last entry. */
 	{ TEGRA210_CLK_CLK_MAX, TEGRA210_CLK_CLK_MAX, 0, 0 },
 };
Signature · 1 line
2.20.1
author maintainer
#139 lore raw

PATCH 124/167 scsi: target/core: Use the SECTOR_SHIFT constant

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit 80b045b385cfef10939c913fbfeb19ce5491c1f2 ]

Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>, use it. This patch does not change any functionality.

---
 drivers/target/target_core_iblock.c | 4 ++--
 drivers/target/target_core_iblock.h | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)
drivers/target/target_core_iblock.c +2 -2
index ce1321a5cb7bf..1bc9b14236d8b 100644
@@ -514,7 +514,7 @@ iblock_execute_write_same(struct se_cmd *cmd)
 		}
 
 		/* Always in 512 byte units for Linux/Block */
-		block_lba += sg->length >> IBLOCK_LBA_SHIFT;
+		block_lba += sg->length >> SECTOR_SHIFT;
 		sectors -= 1;
 	}
 
@@ -757,7 +757,7 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 		}
 
 		/* Always in 512 byte units for Linux/Block */
-		block_lba += sg->length >> IBLOCK_LBA_SHIFT;
+		block_lba += sg->length >> SECTOR_SHIFT;
 		sg_num--;
 	}
 
drivers/target/target_core_iblock.h +0 -1
index 9cc3843404d44..cefc641145b3b 100644
@@ -9,7 +9,6 @@
 #define IBLOCK_VERSION		"4.0"
 
 #define IBLOCK_MAX_CDBS		16
-#define IBLOCK_LBA_SHIFT	9
 
 struct iblock_req {
 	refcount_t pending;
Signature · 1 line
2.20.1
author maintainer
#140 lore raw

PATCH 125/167 scsi: target/iblock: Fix overrun in WRITE SAME emulation

In reply to Sasha Levin

From: Roman Bolshakov <[email protected]>

[ Upstream commit 5676234f20fef02f6ca9bd66c63a8860fce62645 ]

WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range.

The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio.

Fixes c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
---
 drivers/target/target_core_iblock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/target/target_core_iblock.c +1 -1
index 1bc9b14236d8b..854b2bcca7c1a 100644
@@ -515,7 +515,7 @@ iblock_execute_write_same(struct se_cmd *cmd)
 
 		/* Always in 512 byte units for Linux/Block */
 		block_lba += sg->length >> SECTOR_SHIFT;
-		sectors -= 1;
+		sectors -= sg->length >> SECTOR_SHIFT;
 	}
 
 	iblock_submit_bios(&list);
Signature · 1 line
2.20.1
author maintainer
#155 lore raw

PATCH 131/167 ceph: use ceph_evict_inode to cleanup inode's resource

In reply to Sasha Levin

From: "Yan, Zheng" <[email protected]>

[ Upstream commit 87bc5b895d94a0f40fe170d4cf5771c8e8f85d15 ]

remove_session_caps() relies on __wait_on_freeing_inode(), to wait for freeing inode to remove its caps. But VFS wakes freeing inode waiters before calling destroy_inode().

---
 fs/ceph/inode.c | 7 +++++--
 fs/ceph/super.c | 2 +-
 fs/ceph/super.h | 2 +-
 3 files changed, 7 insertions(+), 4 deletions(-)
fs/ceph/inode.c +5 -2
index 3e518c2ae2bf9..2a64e8f695b93 100644
@@ -528,13 +528,16 @@ static void ceph_i_callback(struct rcu_head *head)
 	kmem_cache_free(ceph_inode_cachep, ci);
 }
 
-void ceph_destroy_inode(struct inode *inode)
+void ceph_evict_inode(struct inode *inode)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	struct ceph_inode_frag *frag;
 	struct rb_node *n;
 
-	dout("destroy_inode %p ino %llx.%llx\n", inode, ceph_vinop(inode));
+	dout("evict_inode %p ino %llx.%llx\n", inode, ceph_vinop(inode));
+
+	truncate_inode_pages_final(&inode->i_data);
+	clear_inode(inode);
 
 	ceph_fscache_unregister_inode_cookie(ci);
 
fs/ceph/super.c +1 -1
index c5cf46e43f2e7..02528e11bf331 100644
@@ -827,9 +827,9 @@ static int ceph_remount(struct super_block *sb, int *flags, char *data)
 
 static const struct super_operations ceph_super_ops = {
 	.alloc_inode	= ceph_alloc_inode,
-	.destroy_inode	= ceph_destroy_inode,
 	.write_inode    = ceph_write_inode,
 	.drop_inode	= ceph_drop_inode,
+	.evict_inode	= ceph_evict_inode,
 	.sync_fs        = ceph_sync_fs,
 	.put_super	= ceph_put_super,
 	.remount_fs	= ceph_remount,
fs/ceph/super.h +1 -1
index d8579a56e5dc2..6ef2a3b60951a 100644
@@ -854,7 +854,7 @@ static inline bool __ceph_have_pending_cap_snap(struct ceph_inode_info *ci)
 extern const struct inode_operations ceph_file_iops;
 
 extern struct inode *ceph_alloc_inode(struct super_block *sb);
-extern void ceph_destroy_inode(struct inode *inode);
+extern void ceph_evict_inode(struct inode *inode);
 extern int ceph_drop_inode(struct inode *inode);
 
 extern struct inode *ceph_get_inode(struct super_block *sb,
Signature · 1 line
2.20.1
author maintainer
#160 lore raw

PATCH 136/167 KVM: PPC: Use ccr field in pt_regs struct embedded in vcpu struct

In reply to Sasha Levin

From: Paul Mackerras <[email protected]>

[ Upstream commit fd0944baad806dfb4c777124ec712c55b714ff51 ]

When the 'regs' field was added to struct kvm_vcpu_arch, the code was changed to use several of the fields inside regs (e.g., gpr, lr, etc.) but not the ccr field, because the ccr field in struct pt_regs is 64 bits on 64-bit platforms, but the cr field in kvm_vcpu_arch is only 32 bits. This changes the code to use the regs.ccr field instead of cr, and changes the assembly code on 64-bit platforms to use 64-bit loads and stores instead of 32-bit ones.

---
 arch/powerpc/include/asm/kvm_book3s.h    |  4 ++--
 arch/powerpc/include/asm/kvm_book3s_64.h |  4 ++--
 arch/powerpc/include/asm/kvm_booke.h     |  4 ++--
 arch/powerpc/include/asm/kvm_host.h      |  2 --
 arch/powerpc/kernel/asm-offsets.c        |  4 ++--
 arch/powerpc/kvm/book3s_emulate.c        | 12 ++++++------
 arch/powerpc/kvm/book3s_hv.c             |  4 ++--
 arch/powerpc/kvm/book3s_hv_rmhandlers.S  |  4 ++--
 arch/powerpc/kvm/book3s_hv_tm.c          |  6 +++---
 arch/powerpc/kvm/book3s_hv_tm_builtin.c  |  5 +++--
 arch/powerpc/kvm/book3s_pr.c             |  4 ++--
 arch/powerpc/kvm/bookehv_interrupts.S    |  8 ++++----
 arch/powerpc/kvm/emulate_loadstore.c     |  1 -
 13 files changed, 30 insertions(+), 32 deletions(-)
arch/powerpc/include/asm/kvm_book3s.h +2 -2
index 83a9aa3cf6891..dd18d8174504f 100644
@@ -301,12 +301,12 @@ static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
 
 static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
 {
-	vcpu->arch.cr = val;
+	vcpu->arch.regs.ccr = val;
 }
 
 static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.cr;
+	return vcpu->arch.regs.ccr;
 }
 
 static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, ulong val)
arch/powerpc/include/asm/kvm_book3s_64.h +2 -2
index dc435a5af7d6c..14fa07c73f44d 100644
@@ -482,7 +482,7 @@ static inline u64 sanitize_msr(u64 msr)
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 static inline void copy_from_checkpoint(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.cr  = vcpu->arch.cr_tm;
+	vcpu->arch.regs.ccr  = vcpu->arch.cr_tm;
 	vcpu->arch.regs.xer = vcpu->arch.xer_tm;
 	vcpu->arch.regs.link  = vcpu->arch.lr_tm;
 	vcpu->arch.regs.ctr = vcpu->arch.ctr_tm;
@@ -499,7 +499,7 @@ static inline void copy_from_checkpoint(struct kvm_vcpu *vcpu)
 
 static inline void copy_to_checkpoint(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.cr_tm  = vcpu->arch.cr;
+	vcpu->arch.cr_tm  = vcpu->arch.regs.ccr;
 	vcpu->arch.xer_tm = vcpu->arch.regs.xer;
 	vcpu->arch.lr_tm  = vcpu->arch.regs.link;
 	vcpu->arch.ctr_tm = vcpu->arch.regs.ctr;
arch/powerpc/include/asm/kvm_booke.h +2 -2
index d513e3ed1c659..f0cef625f17ce 100644
@@ -46,12 +46,12 @@ static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
 
 static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
 {
-	vcpu->arch.cr = val;
+	vcpu->arch.regs.ccr = val;
 }
 
 static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.cr;
+	return vcpu->arch.regs.ccr;
 }
 
 static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, ulong val)
arch/powerpc/include/asm/kvm_host.h +0 -2
index 2b6049e839706..2f95e38f05491 100644
@@ -538,8 +538,6 @@ struct kvm_vcpu_arch {
 	ulong tar;
 #endif
 
-	u32 cr;
-
 #ifdef CONFIG_PPC_BOOK3S
 	ulong hflags;
 	ulong guest_owned_ext;
arch/powerpc/kernel/asm-offsets.c +2 -2
index 89cf15566c4e8..7c3738d890e8b 100644
@@ -438,7 +438,7 @@ int main(void)
 #ifdef CONFIG_PPC_BOOK3S
 	OFFSET(VCPU_TAR, kvm_vcpu, arch.tar);
 #endif
-	OFFSET(VCPU_CR, kvm_vcpu, arch.cr);
+	OFFSET(VCPU_CR, kvm_vcpu, arch.regs.ccr);
 	OFFSET(VCPU_PC, kvm_vcpu, arch.regs.nip);
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	OFFSET(VCPU_MSR, kvm_vcpu, arch.shregs.msr);
@@ -695,7 +695,7 @@ int main(void)
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
 #else /* CONFIG_PPC_BOOK3S */
-	OFFSET(VCPU_CR, kvm_vcpu, arch.cr);
+	OFFSET(VCPU_CR, kvm_vcpu, arch.regs.ccr);
 	OFFSET(VCPU_XER, kvm_vcpu, arch.regs.xer);
 	OFFSET(VCPU_LR, kvm_vcpu, arch.regs.link);
 	OFFSET(VCPU_CTR, kvm_vcpu, arch.regs.ctr);
arch/powerpc/kvm/book3s_emulate.c +6 -6
index 36b11c5a0dbb9..2654df220d054 100644
@@ -110,7 +110,7 @@ static inline void kvmppc_copyto_vcpu_tm(struct kvm_vcpu *vcpu)
 	vcpu->arch.ctr_tm = vcpu->arch.regs.ctr;
 	vcpu->arch.tar_tm = vcpu->arch.tar;
 	vcpu->arch.lr_tm = vcpu->arch.regs.link;
-	vcpu->arch.cr_tm = vcpu->arch.cr;
+	vcpu->arch.cr_tm = vcpu->arch.regs.ccr;
 	vcpu->arch.xer_tm = vcpu->arch.regs.xer;
 	vcpu->arch.vrsave_tm = vcpu->arch.vrsave;
 }
@@ -129,7 +129,7 @@ static inline void kvmppc_copyfrom_vcpu_tm(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs.ctr = vcpu->arch.ctr_tm;
 	vcpu->arch.tar = vcpu->arch.tar_tm;
 	vcpu->arch.regs.link = vcpu->arch.lr_tm;
-	vcpu->arch.cr = vcpu->arch.cr_tm;
+	vcpu->arch.regs.ccr = vcpu->arch.cr_tm;
 	vcpu->arch.regs.xer = vcpu->arch.xer_tm;
 	vcpu->arch.vrsave = vcpu->arch.vrsave_tm;
 }
@@ -141,7 +141,7 @@ static void kvmppc_emulate_treclaim(struct kvm_vcpu *vcpu, int ra_val)
 	uint64_t texasr;
 
 	/* CR0 = 0 | MSR[TS] | 0 */
-	vcpu->arch.cr = (vcpu->arch.cr & ~(CR0_MASK << CR0_SHIFT)) |
+	vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & ~(CR0_MASK << CR0_SHIFT)) |
 		(((guest_msr & MSR_TS_MASK) >> (MSR_TS_S_LG - 1))
 		 << CR0_SHIFT);
 
@@ -220,7 +220,7 @@ void kvmppc_emulate_tabort(struct kvm_vcpu *vcpu, int ra_val)
 	tm_abort(ra_val);
 
 	/* CR0 = 0 | MSR[TS] | 0 */
-	vcpu->arch.cr = (vcpu->arch.cr & ~(CR0_MASK << CR0_SHIFT)) |
+	vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & ~(CR0_MASK << CR0_SHIFT)) |
 		(((guest_msr & MSR_TS_MASK) >> (MSR_TS_S_LG - 1))
 		 << CR0_SHIFT);
 
@@ -494,8 +494,8 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 			if (!(kvmppc_get_msr(vcpu) & MSR_PR)) {
 				preempt_disable();
-				vcpu->arch.cr = (CR0_TBEGIN_FAILURE |
-				  (vcpu->arch.cr & ~(CR0_MASK << CR0_SHIFT)));
+				vcpu->arch.regs.ccr = (CR0_TBEGIN_FAILURE |
+				  (vcpu->arch.regs.ccr & ~(CR0_MASK << CR0_SHIFT)));
 
 				vcpu->arch.texasr = (TEXASR_FS | TEXASR_EXACT |
 					(((u64)(TM_CAUSE_EMULATE | TM_CAUSE_PERSISTENT))
arch/powerpc/kvm/book3s_hv.c +2 -2
index 9595db30e6b87..05b32cc12e417 100644
@@ -410,8 +410,8 @@ static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
 	       vcpu->arch.shregs.sprg0, vcpu->arch.shregs.sprg1);
 	pr_err("sprg2 = %.16llx sprg3 = %.16llx\n",
 	       vcpu->arch.shregs.sprg2, vcpu->arch.shregs.sprg3);
-	pr_err("cr = %.8x  xer = %.16lx  dsisr = %.8x\n",
-	       vcpu->arch.cr, vcpu->arch.regs.xer, vcpu->arch.shregs.dsisr);
+	pr_err("cr = %.8lx  xer = %.16lx  dsisr = %.8x\n",
+	       vcpu->arch.regs.ccr, vcpu->arch.regs.xer, vcpu->arch.shregs.dsisr);
 	pr_err("dar = %.16llx\n", vcpu->arch.shregs.dar);
 	pr_err("fault dar = %.16lx dsisr = %.8x\n",
 	       vcpu->arch.fault_dar, vcpu->arch.fault_dsisr);
arch/powerpc/kvm/book3s_hv_rmhandlers.S +2 -2
index 5902a60f92268..68c7591f2b5f7 100644
@@ -1209,7 +1209,7 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 
 	ld	r5, VCPU_LR(r4)
-	lwz	r6, VCPU_CR(r4)
+	ld	r6, VCPU_CR(r4)
 	mtlr	r5
 	mtcr	r6
 
@@ -1320,7 +1320,7 @@ kvmppc_interrupt_hv:
 	std	r3, VCPU_GPR(R12)(r9)
 	/* CR is in the high half of r12 */
 	srdi	r4, r12, 32
-	stw	r4, VCPU_CR(r9)
+	std	r4, VCPU_CR(r9)
 BEGIN_FTR_SECTION
 	ld	r3, HSTATE_CFAR(r13)
 	std	r3, VCPU_CFAR(r9)
arch/powerpc/kvm/book3s_hv_tm.c +3 -3
index 008285058f9b5..888e2609e3f15 100644
@@ -130,7 +130,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 			return RESUME_GUEST;
 		}
 		/* Set CR0 to indicate previous transactional state */
-		vcpu->arch.cr = (vcpu->arch.cr & 0x0fffffff) |
+		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
 		/* L=1 => tresume, L=0 => tsuspend */
 		if (instr & (1 << 21)) {
@@ -174,7 +174,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		copy_from_checkpoint(vcpu);
 
 		/* Set CR0 to indicate previous transactional state */
-		vcpu->arch.cr = (vcpu->arch.cr & 0x0fffffff) |
+		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
 		vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
 		return RESUME_GUEST;
@@ -204,7 +204,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		copy_to_checkpoint(vcpu);
 
 		/* Set CR0 to indicate previous transactional state */
-		vcpu->arch.cr = (vcpu->arch.cr & 0x0fffffff) |
+		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
 		vcpu->arch.shregs.msr = msr | MSR_TS_S;
 		return RESUME_GUEST;
arch/powerpc/kvm/book3s_hv_tm_builtin.c +3 -2
index b2c7c6fca4f96..3cf5863bc06e8 100644
@@ -89,7 +89,8 @@ int kvmhv_p9_tm_emulation_early(struct kvm_vcpu *vcpu)
 		if (instr & (1 << 21))
 			vcpu->arch.shregs.msr = (msr & ~MSR_TS_MASK) | MSR_TS_T;
 		/* Set CR0 to 0b0010 */
-		vcpu->arch.cr = (vcpu->arch.cr & 0x0fffffff) | 0x20000000;
+		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
+			0x20000000;
 		return 1;
 	}
 
@@ -105,5 +106,5 @@ void kvmhv_emulate_tm_rollback(struct kvm_vcpu *vcpu)
 	vcpu->arch.shregs.msr &= ~MSR_TS_MASK;	/* go to N state */
 	vcpu->arch.regs.nip = vcpu->arch.tfhar;
 	copy_from_checkpoint(vcpu);
-	vcpu->arch.cr = (vcpu->arch.cr & 0x0fffffff) | 0xa0000000;
+	vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) | 0xa0000000;
 }
arch/powerpc/kvm/book3s_pr.c +2 -2
index 614ebb4261f76..de9702219dee9 100644
@@ -167,7 +167,7 @@ void kvmppc_copy_to_svcpu(struct kvm_vcpu *vcpu)
 	svcpu->gpr[11] = vcpu->arch.regs.gpr[11];
 	svcpu->gpr[12] = vcpu->arch.regs.gpr[12];
 	svcpu->gpr[13] = vcpu->arch.regs.gpr[13];
-	svcpu->cr  = vcpu->arch.cr;
+	svcpu->cr  = vcpu->arch.regs.ccr;
 	svcpu->xer = vcpu->arch.regs.xer;
 	svcpu->ctr = vcpu->arch.regs.ctr;
 	svcpu->lr  = vcpu->arch.regs.link;
@@ -249,7 +249,7 @@ void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs.gpr[11] = svcpu->gpr[11];
 	vcpu->arch.regs.gpr[12] = svcpu->gpr[12];
 	vcpu->arch.regs.gpr[13] = svcpu->gpr[13];
-	vcpu->arch.cr  = svcpu->cr;
+	vcpu->arch.regs.ccr  = svcpu->cr;
 	vcpu->arch.regs.xer = svcpu->xer;
 	vcpu->arch.regs.ctr = svcpu->ctr;
 	vcpu->arch.regs.link  = svcpu->lr;
arch/powerpc/kvm/bookehv_interrupts.S +4 -4
index 612b7f6a887f8..4e5081e584098 100644
@@ -186,7 +186,7 @@ END_BTB_FLUSH_SECTION
 	 */
 	PPC_LL	r4, PACACURRENT(r13)
 	PPC_LL	r4, (THREAD + THREAD_KVM_VCPU)(r4)
-	stw	r10, VCPU_CR(r4)
+	PPC_STL	r10, VCPU_CR(r4)
 	PPC_STL r11, VCPU_GPR(R4)(r4)
 	PPC_STL	r5, VCPU_GPR(R5)(r4)
 	PPC_STL	r6, VCPU_GPR(R6)(r4)
@@ -296,7 +296,7 @@ _GLOBAL(kvmppc_handler_\intno\()_\srr1)
 	PPC_STL	r4, VCPU_GPR(R4)(r11)
 	PPC_LL	r4, THREAD_NORMSAVE(0)(r10)
 	PPC_STL	r5, VCPU_GPR(R5)(r11)
-	stw	r13, VCPU_CR(r11)
+	PPC_STL	r13, VCPU_CR(r11)
 	mfspr	r5, \srr0
 	PPC_STL	r3, VCPU_GPR(R10)(r11)
 	PPC_LL	r3, THREAD_NORMSAVE(2)(r10)
@@ -323,7 +323,7 @@ _GLOBAL(kvmppc_handler_\intno\()_\srr1)
 	PPC_STL	r4, VCPU_GPR(R4)(r11)
 	PPC_LL	r4, GPR9(r8)
 	PPC_STL	r5, VCPU_GPR(R5)(r11)
-	stw	r9, VCPU_CR(r11)
+	PPC_STL	r9, VCPU_CR(r11)
 	mfspr	r5, \srr0
 	PPC_STL	r3, VCPU_GPR(R8)(r11)
 	PPC_LL	r3, GPR10(r8)
@@ -647,7 +647,7 @@ lightweight_exit:
 	PPC_LL	r3, VCPU_LR(r4)
 	PPC_LL	r5, VCPU_XER(r4)
 	PPC_LL	r6, VCPU_CTR(r4)
-	lwz	r7, VCPU_CR(r4)
+	PPC_LL	r7, VCPU_CR(r4)
 	PPC_LL	r8, VCPU_PC(r4)
 	PPC_LD(r9, VCPU_SHARED_MSR, r11)
 	PPC_LL	r0, VCPU_GPR(R0)(r4)
arch/powerpc/kvm/emulate_loadstore.c +0 -1
index 75dce1ef3bc83..f91b1309a0a86 100644
@@ -117,7 +117,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 
 	emulated = EMULATE_FAIL;
 	vcpu->arch.regs.msr = vcpu->arch.shared->msr;
-	vcpu->arch.regs.ccr = vcpu->arch.cr;
 	if (analyse_instr(&op, &vcpu->arch.regs, inst) = 0) {
 		int type = op.type & INSTR_TYPE_MASK;
 		int size = GETSIZE(op.type);
Signature · 1 line
2.20.1
author maintainer
#161 lore raw

PATCH 137/167 KVM: PPC: Book3S HV: Fix CR0 setting in TM emulation

In reply to Sasha Levin

From: Michael Neuling <[email protected]>

[ Upstream commit 3fefd1cd95df04da67c83c1cb93b663f04b3324f ]

When emulating tsr, treclaim and trechkpt, we incorrectly set CR0. The code currently sets:

    CR0 <- 00 || MSR[TS]
but according to the ISA it should be:
    CR0 <-  0 || MSR[TS] || 0

This fixes the bit shift to put the bits in the correct location.

This is a data integrity issue as CR0 is corrupted.

Fixes 4bb3c7a0208f ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Cc [email protected] # v4.17+
---
 arch/powerpc/kvm/book3s_hv_tm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kvm/book3s_hv_tm.c +3 -3
index 888e2609e3f15..31cd0f327c8a2 100644
@@ -131,7 +131,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* Set CR0 to indicate previous transactional state */
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
-			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
+			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		/* L=1 => tresume, L=0 => tsuspend */
 		if (instr & (1 << 21)) {
 			if (MSR_TM_SUSPENDED(msr))
@@ -175,7 +175,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 
 		/* Set CR0 to indicate previous transactional state */
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
-			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
+			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
 		return RESUME_GUEST;
 
@@ -205,7 +205,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 
 		/* Set CR0 to indicate previous transactional state */
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
-			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
+			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr = msr | MSR_TS_S;
 		return RESUME_GUEST;
 	}
Signature · 1 line
2.20.1
author maintainer
#162 lore raw

PATCH 138/167 ARM: dts: gemini: Set DIR-685 SPI CS as active low

In reply to Sasha Levin

From: Linus Walleij <[email protected]>

[ Upstream commit f90b8fda3a9d72a9422ea80ae95843697f94ea4a ]

The SPI to the display on the DIR-685 is active low, we were just saved by the SPI library enforcing active low on everything before, so set it as active low to avoid ambiguity.

---
 arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/gemini-dlink-dir-685.dts +1 -1
index 502a361d1fe90..15d6157b661db 100644
@@ -65,7 +65,7 @@
 		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		/* Collides with pflash CE1, not so cool */
-		cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
 		panel: display@0 {
Signature · 1 line
2.20.1
author maintainer
#171 lore raw

PATCH 147/167 drm/panel: Add support for Armadeus ST0700 Adapt

In reply to Sasha Levin

From: Sébastien Szymanski <[email protected]>

[ Upstream commit c479450f61c7f1f248c9a54aedacd2a6ca521ff8 ]

This patch adds support for the Armadeus ST0700 Adapt. It comes with a Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so that it can be connected on the TFT header of Armadeus Dev boards.

---
 .../display/panel/armadeus,st0700-adapt.txt   |  9 ++++++
 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt new file +9 -0
new file mode 100644
index 0000000000000..a30d63db3c8f7
@@ -0,0 +1,9 @@
+Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with
+an adapter board.
+
+Required properties:
+- compatible: "armadeus,st0700-adapt"
+- power-supply: see panel-common.txt
+
+Optional properties:
+- backlight: see panel-common.txt
drivers/gpu/drm/panel/panel-simple.c +29 -0
index b1d41c4921dd5..5fd94e2060297 100644
@@ -436,6 +436,32 @@ static const struct panel_desc ampire_am800480r3tmqwa1h = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
+static const struct display_timing santek_st0700i5y_rbslw_f_timing = {
+	.pixelclock = { 26400000, 33300000, 46800000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 16, 210, 354 },
+	.hback_porch = { 45, 36, 6 },
+	.hsync_len = { 1, 10, 40 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 7, 22, 147 },
+	.vback_porch = { 22, 13, 3 },
+	.vsync_len = { 1, 10, 20 },
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE
+};
+
+static const struct panel_desc armadeus_st0700_adapt = {
+	.timings = &santek_st0700i5y_rbslw_f_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+};
+
 static const struct drm_display_mode auo_b101aw03_mode = {
 	.clock = 51450,
 	.hdisplay = 1024,
@@ -2330,6 +2356,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "ampire,am800480r3tmqwa1h",
 		.data = &ampire_am800480r3tmqwa1h,
+	}, {
+		.compatible = "armadeus,st0700-adapt",
+		.data = &armadeus_st0700_adapt,
 	}, {
 		.compatible = "auo,b101aw03",
 		.data = &auo_b101aw03,
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#179 lore raw

PATCH 152/167 i2c: at91: disable TXRDY interrupt after sending data

In reply to Sasha Levin

From: Michał Mirosław <[email protected]>

[ Upstream commit d12e3aae160fb26b534c4496b211d6e60a5179ed ]

Driver was not disabling TXRDY interrupt after last TX byte. This caused interrupt storm until transfer timeouts for slow or broken device on the bus. The patch fixes the interrupt storm on my SAMA5D2-based board.

[v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
Fixes fac368a04048 ("i2c: at91: add new driver")
---
 drivers/i2c/busses/i2c-at91.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-at91.c +5 -4
index 3f3e8b3bf5ff9..0998a388d2ed5 100644
@@ -270,9 +270,11 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
 	writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
 
 	/* send stop when last byte has been written */
-	if (--dev->buf_len == 0)
+	if (--dev->buf_len == 0) {
 		if (!dev->use_alt_cmd)
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+		at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_TXRDY);
+	}
 
 	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
@@ -690,9 +692,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		} else {
 			at91_twi_write_next_byte(dev);
 			at91_twi_write(dev, AT91_TWI_IER,
-				       AT91_TWI_TXCOMP |
-				       AT91_TWI_NACK |
-				       AT91_TWI_TXRDY);
+				       AT91_TWI_TXCOMP | AT91_TWI_NACK |
+				       (dev->buf_len ? AT91_TWI_TXRDY : 0));
 		}
 	}
 
Signature · 1 line
2.20.1
author maintainer
#180 lore raw

PATCH 153/167 i2c: at91: fix clk_offset for sama5d2

In reply to Sasha Levin

From: Michał Mirosław <[email protected]>

[ Upstream commit b1ac6704493fa14b5dc19eb6b69a73932361a131 ]

In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock offset of 3 cycles (compared to 4 in eg. SAMA5D3).

[needs applying to i2c-at91.c instead for earlier kernels]
Fixes 0ef6f3213dac ("i2c: at91: add support for new alternative command mode")
---
 drivers/i2c/busses/i2c-at91.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-at91.c +1 -1
index 0998a388d2ed5..d51bf536bdf75 100644
@@ -914,7 +914,7 @@ static struct at91_twi_pdata sama5d4_config = {
 
 static struct at91_twi_pdata sama5d2_config = {
 	.clk_max_div = 7,
-	.clk_offset = 4,
+	.clk_offset = 3,
 	.has_unre_flag = true,
 	.has_alt_cmd = true,
 	.has_hold_field = true,
Signature · 1 line
2.20.1
author maintainer
#184 lore raw

PATCH 157/167 bcache: only clear BTREE_NODE_dirty bit when it is set

In reply to Sasha Levin

From: Coly Li <[email protected]>

[ Upstream commit e5ec5f4765ada9c75fb3eee93a6e72f0e50599d5 ]

In bch_btree_cache_free() and btree_node_free(), BTREE_NODE_dirty is always set no matter btree node is dirty or not. The code looks like this,

	if (btree_node_dirty(b))
		btree_complete_write(b, btree_current_write(b));
	clear_bit(BTREE_NODE_dirty, &b->flags);

Indeed if btree_node_dirty(b) returns false, it means BTREE_NODE_dirty bit is cleared, then it is unnecessary to clear the bit again.

This patch only clears BTREE_NODE_dirty when btree_node_dirty(b) is true (the bit is set), to save a few CPU cycles.

---
 drivers/md/bcache/btree.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/md/bcache/btree.c +6 -5
index 3f4211b5cd334..8c80833e73a9a 100644
@@ -772,10 +772,10 @@ void bch_btree_cache_free(struct cache_set *c)
 	while (!list_empty(&c->btree_cache)) {
 		b = list_first_entry(&c->btree_cache, struct btree, list);
 
-		if (btree_node_dirty(b))
+		if (btree_node_dirty(b)) {
 			btree_complete_write(b, btree_current_write(b));
-		clear_bit(BTREE_NODE_dirty, &b->flags);
-
+			clear_bit(BTREE_NODE_dirty, &b->flags);
+		}
 		mca_data_free(b);
 	}
 
@@ -1063,9 +1063,10 @@ static void btree_node_free(struct btree *b)
 
 	mutex_lock(&b->write_lock);
 
-	if (btree_node_dirty(b))
+	if (btree_node_dirty(b)) {
 		btree_complete_write(b, btree_current_write(b));
-	clear_bit(BTREE_NODE_dirty, &b->flags);
+		clear_bit(BTREE_NODE_dirty, &b->flags);
+	}
 
 	mutex_unlock(&b->write_lock);
 
Signature · 1 line
2.20.1
author maintainer
#185 lore raw

PATCH 158/167 bcache: add comments for mutex_lock(&b->write_lock)

In reply to Sasha Levin

From: Coly Li <[email protected]>

[ Upstream commit 41508bb7d46b74dba631017e5a702a86caf1db8c ]

When accessing or modifying BTREE_NODE_dirty bit, it is not always necessary to acquire b->write_lock. In bch_btree_cache_free() and mca_reap() acquiring b->write_lock is necessary, and this patch adds comments to explain why mutex_lock(&b->write_lock) is necessary for checking or clearing BTREE_NODE_dirty bit there.

---
 drivers/md/bcache/btree.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/md/bcache/btree.c +10 -0
index 8c80833e73a9a..e0468fd41b6ea 100644
@@ -649,6 +649,11 @@ static int mca_reap(struct btree *b, unsigned int min_order, bool flush)
 		up(&b->io_mutex);
 	}
 
+	/*
+	 * BTREE_NODE_dirty might be cleared in btree_flush_btree() by
+	 * __bch_btree_node_write(). To avoid an extra flush, acquire
+	 * b->write_lock before checking BTREE_NODE_dirty bit.
+	 */
 	mutex_lock(&b->write_lock);
 	if (btree_node_dirty(b))
 		__bch_btree_node_write(b, &cl);
@@ -772,6 +777,11 @@ void bch_btree_cache_free(struct cache_set *c)
 	while (!list_empty(&c->btree_cache)) {
 		b = list_first_entry(&c->btree_cache, struct btree, list);
 
+		/*
+		 * This function is called by cache_set_free(), no I/O
+		 * request on cache now, it is unnecessary to acquire
+		 * b->write_lock before clearing BTREE_NODE_dirty anymore.
+		 */
 		if (btree_node_dirty(b)) {
 			btree_complete_write(b, btree_current_write(b));
 			clear_bit(BTREE_NODE_dirty, &b->flags);
Signature · 1 line
2.20.1
author maintainer
#186 lore raw

PATCH 159/167 bcache: fix race in btree_flush_write()

In reply to Sasha Levin

From: Coly Li <[email protected]>

[ Upstream commit 50a260e859964002dab162513a10f91ae9d3bcd3 ]

There is a race between mca_reap(), btree_node_free() and journal code btree_flush_write(), which results very rare and strange deadlock or panic and are very hard to reproduce.

Let me explain how the race happens. In btree_flush_write() one btree node with oldest journal pin is selected, then it is flushed to cache device, the select-and-flush is a two steps operation. Between these two steps, there are something may happen inside the race window,
- The selected btree node was reaped by mca_reap() and allocated to other requesters for other btree node.
- The slected btree node was selected, flushed and released by mca shrink callback bch_mca_scan().
When btree_flush_write() tries to flush the selected btree node, firstly b->write_lock is held by mutex_lock(). If the race happens and the memory of selected btree node is allocated to other btree node, if that btree node's write_lock is held already, a deadlock very probably happens here. A worse case is the memory of the selected btree node is released, then all references to this btree node (e.g. b->write_lock) will trigger NULL pointer deference panic.

This race was introduced in commit cafe56359144 ("bcache: A block layer cache"), and enlarged by commit c4dc2497d50d ("bcache: fix high CPU occupancy during journal"), which selected 128 btree nodes and flushed them one-by-one in a quite long time period.

Such race is not easy to reproduce before. On a Lenovo SR650 server with 48 Xeon cores, and configure 1 NVMe SSD as cache device, a MD raid0 device assembled by 3 NVMe SSDs as backing device, this race can be observed around every 10,000 times btree_flush_write() gets called. Both deadlock and kernel panic all happened as aftermath of the race.

The idea of the fix is to add a btree flag BTREE_NODE_journal_flush. It is set when selecting btree nodes, and cleared after btree nodes flushed. Then when mca_reap() selects a btree node with this bit set, this btree node will be skipped. Since mca_reap() only reaps btree node without BTREE_NODE_journal_flush flag, such race is avoided.

Once corner case should be noticed, that is btree_node_free(). It might be called in some error handling code path. For example the following code piece from btree_split(),

        2149 err_free2:
        2150         bkey_put(b->c, &n2->key);
        2151         btree_node_free(n2);
        2152         rw_unlock(true, n2);
        2153 err_free1:
        2154         bkey_put(b->c, &n1->key);
        2155         btree_node_free(n1);
        2156         rw_unlock(true, n1);

At line 2151 and 2155, the btree node n2 and n1 are released without mac_reap(), so BTREE_NODE_journal_flush also needs to be checked here. If btree_node_free() is called directly in such error handling path, and the selected btree node has BTREE_NODE_journal_flush bit set, just delay for 1 us and retry again. In this case this btree node won't be skipped, just retry until the BTREE_NODE_journal_flush bit cleared, and free the btree node memory.

Fixes cafe56359144 ("bcache: A block layer cache")
---
 drivers/md/bcache/btree.c   | 28 +++++++++++++++++++++++++++-
 drivers/md/bcache/btree.h   |  2 ++
 drivers/md/bcache/journal.c |  7 +++++++
 3 files changed, 36 insertions(+), 1 deletion(-)
drivers/md/bcache/btree.c +27 -1
index e0468fd41b6ea..45f684689c357 100644
@@ -35,7 +35,7 @@
 #include <linux/rcupdate.h>
 #include <linux/sched/clock.h>
 #include <linux/rculist.h>
-
+#include <linux/delay.h>
 #include <trace/events/bcache.h>
 
 /*
@@ -649,12 +649,25 @@ static int mca_reap(struct btree *b, unsigned int min_order, bool flush)
 		up(&b->io_mutex);
 	}
 
+retry:
 	/*
 	 * BTREE_NODE_dirty might be cleared in btree_flush_btree() by
 	 * __bch_btree_node_write(). To avoid an extra flush, acquire
 	 * b->write_lock before checking BTREE_NODE_dirty bit.
 	 */
 	mutex_lock(&b->write_lock);
+	/*
+	 * If this btree node is selected in btree_flush_write() by journal
+	 * code, delay and retry until the node is flushed by journal code
+	 * and BTREE_NODE_journal_flush bit cleared by btree_flush_write().
+	 */
+	if (btree_node_journal_flush(b)) {
+		pr_debug("bnode %p is flushing by journal, retry", b);
+		mutex_unlock(&b->write_lock);
+		udelay(1);
+		goto retry;
+	}
+
 	if (btree_node_dirty(b))
 		__bch_btree_node_write(b, &cl);
 	mutex_unlock(&b->write_lock);
@@ -1071,7 +1084,20 @@ static void btree_node_free(struct btree *b)
 
 	BUG_ON(b == b->c->root);
 
+retry:
 	mutex_lock(&b->write_lock);
+	/*
+	 * If the btree node is selected and flushing in btree_flush_write(),
+	 * delay and retry until the BTREE_NODE_journal_flush bit cleared,
+	 * then it is safe to free the btree node here. Otherwise this btree
+	 * node will be in race condition.
+	 */
+	if (btree_node_journal_flush(b)) {
+		mutex_unlock(&b->write_lock);
+		pr_debug("bnode %p journal_flush set, retry", b);
+		udelay(1);
+		goto retry;
+	}
 
 	if (btree_node_dirty(b)) {
 		btree_complete_write(b, btree_current_write(b));
drivers/md/bcache/btree.h +2 -0
index a68d6c55783bd..4d0cca145f699 100644
@@ -158,11 +158,13 @@ enum btree_flags {
 	BTREE_NODE_io_error,
 	BTREE_NODE_dirty,
 	BTREE_NODE_write_idx,
+	BTREE_NODE_journal_flush,
 };
 
 BTREE_FLAG(io_error);
 BTREE_FLAG(dirty);
 BTREE_FLAG(write_idx);
+BTREE_FLAG(journal_flush);
 
 static inline struct btree_write *btree_current_write(struct btree *b)
 {
drivers/md/bcache/journal.c +7 -0
index ec1e35a62934d..7bb15cddca5ec 100644
@@ -404,6 +404,7 @@ static void btree_flush_write(struct cache_set *c)
 retry:
 	best = NULL;
 
+	mutex_lock(&c->bucket_lock);
 	for_each_cached_btree(b, c, i)
 		if (btree_current_write(b)->journal) {
 			if (!best)
@@ -416,9 +417,14 @@ static void btree_flush_write(struct cache_set *c)
 		}
 
 	b = best;
+	if (b)
+		set_btree_node_journal_flush(b);
+	mutex_unlock(&c->bucket_lock);
+
 	if (b) {
 		mutex_lock(&b->write_lock);
 		if (!btree_current_write(b)->journal) {
+			clear_bit(BTREE_NODE_journal_flush, &b->flags);
 			mutex_unlock(&b->write_lock);
 			/* We raced */
 			atomic_long_inc(&c->retry_flush_write);
@@ -426,6 +432,7 @@ static void btree_flush_write(struct cache_set *c)
 		}
 
 		__bch_btree_node_write(b, NULL);
+		clear_bit(BTREE_NODE_journal_flush, &b->flags);
 		mutex_unlock(&b->write_lock);
 	}
 }
Signature · 1 line
2.20.1
author maintainer
#187 lore raw

PATCH 160/167 drm/i915/userptr: Acquire the page lock around set_page_dirty()

In reply to Sasha Levin

From: Chris Wilson <[email protected]>

[ Upstream commit aa56a292ce623734ddd30f52d73f527d1f3529b5 ]

set_page_dirty says:

For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to.

Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317

Fixes 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")

References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers")

---
 drivers/gpu/drm/i915/i915_gem_userptr.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_gem_userptr.c +9 -1
index 2c9b284036d10..e13ea2ecd669c 100644
@@ -692,7 +692,15 @@ i915_gem_userptr_put_pages(struct drm_i915_gem_object *obj,
 
 	for_each_sgt_page(page, sgt_iter, pages) {
 		if (obj->mm.dirty)
-			set_page_dirty(page);
+			/*
+			 * As this may not be anonymous memory (e.g. shmem)
+			 * but exist on a real mapping, we have to lock
+			 * the page in order to dirty it -- holding
+			 * the page reference is not sufficient to
+			 * prevent the inode from being truncated.
+			 * Play safe and take the lock.
+			 */
+			set_page_dirty_lock(page);
 
 		mark_page_accessed(page);
 		put_page(page);
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#188 lore raw

PATCH 161/167 drm/i915: Make sure cdclk is high enough for DP audio on VLV/CHV

In reply to Sasha Levin

From: Ville Syrjälä <[email protected]>

[ Upstream commit a8f196a0fa6391a436f63f360a1fb57031fdf26c ]

On VLV/CHV there is some kind of linkage between the cdclk frequency and the DP link frequency. The spec says:
"For DP audio configuration, cdclk frequency shall be set to
meet the following requirements:

 DP Link Frequency(MHz) | Cdclk frequency(MHz)
 270                    | 320 or higher
 162                    | 200 or higher"

I suspect that would more accurately be expressed as "cdclk >= DP link clock", and in any case we can express it like that in the code because of the limited set of cdclk (200, 266, 320, 400 MHz) and link frequencies (162 and 270 MHz) we support.

Without this we can end up in a situation where the cdclk is too low and enabling DP audio will kill the pipe. Happens eg. with 2560x1440 modes where the 266MHz cdclk is sufficient to pump the pixels (241.5 MHz dotclock) but is too low for the DP audio due to the link frequency being 270 MHz.

v2: Spell out the cdclk and link frequencies we actually support

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149

---
 drivers/gpu/drm/i915/intel_cdclk.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/gpu/drm/i915/intel_cdclk.c +11 -0
index 29075c7634280..7b4906ede148b 100644
@@ -2208,6 +2208,17 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
 	if (INTEL_GEN(dev_priv) >= 9)
 		min_cdclk = max(2 * 96000, min_cdclk);
 
+	/*
+	 * "For DP audio configuration, cdclk frequency shall be set to
+	 *  meet the following requirements:
+	 *  DP Link Frequency(MHz) | Cdclk frequency(MHz)
+	 *  270                    | 320 or higher
+	 *  162                    | 200 or higher"
+	 */
+	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+	    intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio)
+		min_cdclk = max(crtc_state->port_clock, min_cdclk);
+
 	/*
 	 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower
 	 * than 320000KHz.
Signature · 6 lines
2.20.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#189 lore raw

PATCH 162/167 virtio/s390: fix race on airq_areas[]

In reply to Sasha Levin

From: Halil Pasic <[email protected]>

[ Upstream commit 4f419eb14272e0698e8c55bb5f3f266cc2a21c81 ]

The access to airq_areas was racy ever since the adapter interrupts got introduced to virtio-ccw, but since commit 39c7dcb15892 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as well. Namely before that commit the airq_info that got overwritten was still functional. After that commit however the two infos share a summary_indicator, which aggravates the situation. Which means auto-online mechanism occasionally hangs the boot with virtio_blk.

Fixes 96b14536d935 ("virtio-ccw: virtio-ccw adapter interrupt support.")
---
 drivers/s390/virtio/virtio_ccw.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/s390/virtio/virtio_ccw.c +3 -0
index ec54538f7ae1c..67efdf25657f3 100644
@@ -132,6 +132,7 @@ struct airq_info {
 	struct airq_iv *aiv;
 };
 static struct airq_info *airq_areas[MAX_AIRQ_AREAS];
+static DEFINE_MUTEX(airq_areas_lock);
 
 #define CCW_CMD_SET_VQ 0x13
 #define CCW_CMD_VDEV_RESET 0x33
@@ -244,9 +245,11 @@ static unsigned long get_airq_indicator(struct virtqueue *vqs[], int nvqs,
 	unsigned long bit, flags;
 
 	for (i = 0; i < MAX_AIRQ_AREAS && !indicator_addr; i++) {
+		mutex_lock(&airq_areas_lock);
 		if (!airq_areas[i])
 			airq_areas[i] = new_airq_info();
 		info = airq_areas[i];
+		mutex_unlock(&airq_areas_lock);
 		if (!info)
 			return 0;
 		write_lock_irqsave(&info->lock, flags);
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/167 media: cec/v4l2: move V4L2 specific CEC functions to V4L2

In reply to Sasha Levin

From: Hans Verkuil <[email protected]>

[ Upstream commit 9cfd2753f8f3923f89cbb15f940f3aa0e7202d3e ]

Several CEC functions are actually specific for use with receivers, i.e. they should be part of the V4L2 subsystem, not CEC.

These functions deal with validating and modifying EDIDs for (HDMI) receivers, and they do not actually have anything to do with the CEC subsystem and whether or not CEC is enabled. The problem was that if the CEC_CORE config option was not set, then these functions would become stubs, but that's not right: they should always be valid.

So replace the cec_ prefix by v4l2_ and move them to v4l2-dv-timings.c. Update all drivers that call these accordingly.

---
 drivers/media/cec/cec-edid.c                  |  71 --------
 drivers/media/i2c/adv7604.c                   |   4 +-
 drivers/media/i2c/adv7842.c                   |   4 +-
 drivers/media/i2c/tc358743.c                  |   2 +-
 drivers/media/platform/vivid/vivid-vid-cap.c  |   4 +-
 .../media/platform/vivid/vivid-vid-common.c   |   2 +-
 drivers/media/v4l2-core/v4l2-dv-timings.c     | 151 ++++++++++++++++++
 include/media/cec.h                           |  80 ----------
 include/media/v4l2-dv-timings.h               |   6 +
 9 files changed, 165 insertions(+), 159 deletions(-)
drivers/media/cec/cec-edid.c +0 -71
index f587e8eaefd81..e2f54eec08294 100644
@@ -22,74 +22,3 @@ u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
 	return (edid[loc] << 8) | edid[loc + 1];
 }
 EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
-
-void cec_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr)
-{
-	unsigned int loc = cec_get_edid_spa_location(edid, size);
-	u8 sum = 0;
-	unsigned int i;
-
-	if (loc == 0)
-		return;
-	edid[loc] = phys_addr >> 8;
-	edid[loc + 1] = phys_addr & 0xff;
-	loc &= ~0x7f;
-
-	/* update the checksum */
-	for (i = loc; i < loc + 127; i++)
-		sum += edid[i];
-	edid[i] = 256 - sum;
-}
-EXPORT_SYMBOL_GPL(cec_set_edid_phys_addr);
-
-u16 cec_phys_addr_for_input(u16 phys_addr, u8 input)
-{
-	/* Check if input is sane */
-	if (WARN_ON(input == 0 || input > 0xf))
-		return CEC_PHYS_ADDR_INVALID;
-
-	if (phys_addr == 0)
-		return input << 12;
-
-	if ((phys_addr & 0x0fff) == 0)
-		return phys_addr | (input << 8);
-
-	if ((phys_addr & 0x00ff) == 0)
-		return phys_addr | (input << 4);
-
-	if ((phys_addr & 0x000f) == 0)
-		return phys_addr | input;
-
-	/*
-	 * All nibbles are used so no valid physical addresses can be assigned
-	 * to the input.
-	 */
-	return CEC_PHYS_ADDR_INVALID;
-}
-EXPORT_SYMBOL_GPL(cec_phys_addr_for_input);
-
-int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
-{
-	int i;
-
-	if (parent)
-		*parent = phys_addr;
-	if (port)
-		*port = 0;
-	if (phys_addr == CEC_PHYS_ADDR_INVALID)
-		return 0;
-	for (i = 0; i < 16; i += 4)
-		if (phys_addr & (0xf << i))
-			break;
-	if (i == 16)
-		return 0;
-	if (parent)
-		*parent = phys_addr & (0xfff0 << i);
-	if (port)
-		*port = (phys_addr >> i) & 0xf;
-	for (i += 4; i < 16; i += 4)
-		if ((phys_addr & (0xf << i)) == 0)
-			return -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cec_phys_addr_validate);
drivers/media/i2c/adv7604.c +2 -2
index f01964c36ad57..a4b0a89c7e7e6 100644
@@ -2297,8 +2297,8 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
 		edid->blocks = 2;
 		return -E2BIG;
 	}
-	pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
-	err = cec_phys_addr_validate(pa, &pa, NULL);
+	pa = v4l2_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
+	err = v4l2_phys_addr_validate(pa, &pa, NULL);
 	if (err)
 		return err;
 
drivers/media/i2c/adv7842.c +2 -2
index bb43a75ed6d0b..58662ba92d4f8 100644
@@ -791,8 +791,8 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
 		return 0;
 	}
 
-	pa = cec_get_edid_phys_addr(edid, 256, &spa_loc);
-	err = cec_phys_addr_validate(pa, &pa, NULL);
+	pa = v4l2_get_edid_phys_addr(edid, 256, &spa_loc);
+	err = v4l2_phys_addr_validate(pa, &pa, NULL);
 	if (err)
 		return err;
 
drivers/media/i2c/tc358743.c +1 -1
index 26070fb6ce4eb..e4c0a27b636aa 100644
@@ -1789,7 +1789,7 @@ static int tc358743_s_edid(struct v4l2_subdev *sd,
 		return -E2BIG;
 	}
 	pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
-	err = cec_phys_addr_validate(pa, &pa, NULL);
+	err = v4l2_phys_addr_validate(pa, &pa, NULL);
 	if (err)
 		return err;
 
drivers/media/platform/vivid/vivid-vid-cap.c +2 -2
index 3b09ffceefd56..2e273f4dfc295 100644
@@ -1724,7 +1724,7 @@ int vidioc_s_edid(struct file *file, void *_fh,
 		return -E2BIG;
 	}
 	phys_addr = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
-	ret = cec_phys_addr_validate(phys_addr, &phys_addr, NULL);
+	ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
 	if (ret)
 		return ret;
 
@@ -1740,7 +1740,7 @@ int vidioc_s_edid(struct file *file, void *_fh,
 
 	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
 		cec_s_phys_addr(dev->cec_tx_adap[i],
-				cec_phys_addr_for_input(phys_addr, i + 1),
+				v4l2_phys_addr_for_input(phys_addr, i + 1),
 				false);
 	return 0;
 }
drivers/media/platform/vivid/vivid-vid-common.c +1 -1
index 2079861d2270f..e108e9befb77f 100644
@@ -863,7 +863,7 @@ int vidioc_g_edid(struct file *file, void *_fh,
 	if (edid->blocks > dev->edid_blocks - edid->start_block)
 		edid->blocks = dev->edid_blocks - edid->start_block;
 	if (adap)
-		cec_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
+		v4l2_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
 	memcpy(edid->edid, dev->edid + edid->start_block * 128, edid->blocks * 128);
 	return 0;
 }
drivers/media/v4l2-core/v4l2-dv-timings.c +151 -0

160 lines not on this page · raw message

include/media/cec.h +0 -80

92 lines not on this page · raw message

include/media/v4l2-dv-timings.h +6 -0
index 17cb27df1b813..4e7732d3908c4 100644
@@ -234,4 +234,10 @@ v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
 			 const struct hdmi_vendor_infoframe *hdmi,
 			 unsigned int height);
 
+u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
+			    unsigned int *offset);
+void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
+u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input);
+int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
+
 #endif
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/167 scsi: qla2xxx: Move log messages before issuing command to firmware

In reply to Sasha Levin

From: Giridhar Malavali <[email protected]>

[ Upstream commit 9fe278f44b4bc06cc61e33b2af65f87d507d13d0 ]

There is a probability that the SRB structure might have been released by the time the debug log message dereferences it. This patch moved the log messages before the command is issued to the firmware to prevent unknown behavior and kernel crash

Fixes 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
---
 drivers/scsi/qla2xxx/qla_gs.c   | 15 ++++++-----
 drivers/scsi/qla2xxx/qla_init.c | 48 +++++++++++++++++----------------
 2 files changed, 33 insertions(+), 30 deletions(-)
drivers/scsi/qla2xxx/qla_gs.c +8 -7
index 1f1a05a90d3d7..fc08e46a93ca9 100644
@@ -3360,15 +3360,15 @@ int qla24xx_async_gpsc(scsi_qla_host_t *vha, fc_port_t *fcport)
 	sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
 	sp->done = qla24xx_async_gpsc_sp_done;
 
-	rval = qla2x00_start_sp(sp);
-	if (rval != QLA_SUCCESS)
-		goto done_free_sp;
-
 	ql_dbg(ql_dbg_disc, vha, 0x205e,
 	    "Async-%s %8phC hdl=%x loopid=%x portid=%02x%02x%02x.\n",
 	    sp->name, fcport->port_name, sp->handle,
 	    fcport->loop_id, fcport->d_id.b.domain,
 	    fcport->d_id.b.area, fcport->d_id.b.al_pa);
+
+	rval = qla2x00_start_sp(sp);
+	if (rval != QLA_SUCCESS)
+		goto done_free_sp;
 	return rval;
 
 done_free_sp:
@@ -3729,13 +3729,14 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id)
 	sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
 	sp->done = qla2x00_async_gpnid_sp_done;
 
+	ql_dbg(ql_dbg_disc, vha, 0x2067,
+	    "Async-%s hdl=%x ID %3phC.\n", sp->name,
+	    sp->handle, ct_req->req.port_id.port_id);
+
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS)
 		goto done_free_sp;
 
-	ql_dbg(ql_dbg_disc, vha, 0x2067,
-	    "Async-%s hdl=%x ID %3phC.\n", sp->name,
-	    sp->handle, ct_req->req.port_id.port_id);
 	return rval;
 
 done_free_sp:
drivers/scsi/qla2xxx/qla_init.c +25 -23

113 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/167 x86, hibernate: Fix nosave_regions setup for hibernation

In reply to Sasha Levin

From: Zhimin Gu <[email protected]>

[ Upstream commit cc55f7537db6af371e9c1c6a71161ee40f918824 ]

On 32bit systems, nosave_regions(non RAM areas) located between max_low_pfn and max_pfn are not excluded from hibernation snapshot currently, which may result in a machine check exception when trying to access these unsafe regions during hibernation:

[  612.800453] Disabling lock debugging due to kernel taint
[  612.805786] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: fe00000000801136
[  612.814344] mce: [Hardware Error]: RIP !INEXACT! 60:<00000000d90be566> {swsusp_save+0x436/0x560}
[  612.823167] mce: [Hardware Error]: TSC 1f5939fe276 ADDR dd000000 MISC 30e0000086
[  612.830677] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1529487426 SOCKET 0 APIC 0 microcode 24
[  612.839581] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[  612.846394] mce: [Hardware Error]: Machine check: Processor context corrupt
[  612.853380] Kernel panic - not syncing: Fatal machine check
[  612.858978] Kernel Offset: 0x18000000 from 0xc1000000 (relocation range: 0xc0000000-0xf7ffdfff)

This is because on 32bit systems, pages above max_low_pfn are regarded as high memeory, and accessing unsafe pages might cause expected MCE. On the problematic 32bit system, there are reserved memory above low memory, which triggered the MCE:

e820 memory mapping:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d160cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d160d000-0x00000000d1613fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d1614000-0x00000000d1a44fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d1a45000-0x00000000d1ecffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d1ed0000-0x00000000d7eeafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7eeb000-0x00000000d7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d875ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8760000-0x00000000d87fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbb8bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbb8c000-0x00000000dbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041edfffff] usable

Fix this problem by changing pfn limit from max_low_pfn to max_pfn. This fix does not impact 64bit system because on 64bit max_low_pfn is the same as max_pfn.

---
 arch/x86/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/setup.c +1 -1
index b4866badb235a..90ecc108bc8a5 100644
@@ -1251,7 +1251,7 @@ void __init setup_arch(char **cmdline_p)
 	x86_init.hyper.guest_late_init();
 
 	e820__reserve_resources();
-	e820__register_nosave_regions(max_low_pfn);
+	e820__register_nosave_regions(max_pfn);
 
 	x86_init.resources.reserve_resources();
 
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 14/167 KVM: hyperv: define VP assist page helpers

In reply to Sasha Levin

From: Ladi Prosek <[email protected]>

[ Upstream commit 72bbf9358c3676bd89dc4bd8fb0b1f2a11c288fc ]

The state related to the VP assist page is still managed by the LAPIC code in the pv_eoi field.

---
 arch/x86/kvm/hyperv.c | 23 +++++++++++++++++++++--
 arch/x86/kvm/hyperv.h |  4 ++++
 arch/x86/kvm/lapic.c  |  4 ++--
 arch/x86/kvm/lapic.h  |  2 +-
 arch/x86/kvm/x86.c    |  2 +-
 5 files changed, 29 insertions(+), 6 deletions(-)
arch/x86/kvm/hyperv.c +21 -2
index 2bb554b90b3c2..5842c5f587fe9 100644
@@ -691,6 +691,24 @@ void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu)
 		stimer_cleanup(&hv_vcpu->stimer[i]);
 }
 
+bool kvm_hv_assist_page_enabled(struct kvm_vcpu *vcpu)
+{
+	if (!(vcpu->arch.hyperv.hv_vapic & HV_X64_MSR_VP_ASSIST_PAGE_ENABLE))
+		return false;
+	return vcpu->arch.pv_eoi.msr_val & KVM_MSR_ENABLED;
+}
+EXPORT_SYMBOL_GPL(kvm_hv_assist_page_enabled);
+
+bool kvm_hv_get_assist_page(struct kvm_vcpu *vcpu,
+			    struct hv_vp_assist_page *assist_page)
+{
+	if (!kvm_hv_assist_page_enabled(vcpu))
+		return false;
+	return !kvm_read_guest_cached(vcpu->kvm, &vcpu->arch.pv_eoi.data,
+				      assist_page, sizeof(*assist_page));
+}
+EXPORT_SYMBOL_GPL(kvm_hv_get_assist_page);
+
 static void stimer_prepare_msg(struct kvm_vcpu_hv_stimer *stimer)
 {
 	struct hv_message *msg = &stimer->msg;
@@ -1076,7 +1094,7 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host)
 
 		if (!(data & HV_X64_MSR_VP_ASSIST_PAGE_ENABLE)) {
 			hv_vcpu->hv_vapic = data;
-			if (kvm_lapic_enable_pv_eoi(vcpu, 0))
+			if (kvm_lapic_enable_pv_eoi(vcpu, 0, 0))
 				return 1;
 			break;
 		}
@@ -1089,7 +1107,8 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host)
 		hv_vcpu->hv_vapic = data;
 		kvm_vcpu_mark_page_dirty(vcpu, gfn);
 		if (kvm_lapic_enable_pv_eoi(vcpu,
-					    gfn_to_gpa(gfn) | KVM_MSR_ENABLED))
+					    gfn_to_gpa(gfn) | KVM_MSR_ENABLED,
+					    sizeof(struct hv_vp_assist_page)))
 			return 1;
 		break;
 	}
arch/x86/kvm/hyperv.h +4 -0
index d6aa969e20f19..0e66c12ed2c3d 100644
@@ -62,6 +62,10 @@ void kvm_hv_vcpu_init(struct kvm_vcpu *vcpu);
 void kvm_hv_vcpu_postcreate(struct kvm_vcpu *vcpu);
 void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu);
 
+bool kvm_hv_assist_page_enabled(struct kvm_vcpu *vcpu);
+bool kvm_hv_get_assist_page(struct kvm_vcpu *vcpu,
+			    struct hv_vp_assist_page *assist_page);
+
 static inline struct kvm_vcpu_hv_stimer *vcpu_to_stimer(struct kvm_vcpu *vcpu,
 							int timer_index)
 {
arch/x86/kvm/lapic.c +2 -2
index 031bd7f91f98a..ccf5a04de94c3 100644
@@ -2628,7 +2628,7 @@ int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 reg, u64 *data)
 	return 0;
 }
 
-int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data)
+int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data, unsigned long len)
 {
 	u64 addr = data & ~KVM_MSR_ENABLED;
 	if (!IS_ALIGNED(addr, 4))
@@ -2638,7 +2638,7 @@ int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data)
 	if (!pv_eoi_enabled(vcpu))
 		return 0;
 	return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
-					 addr, sizeof(u8));
+					 addr, len);
 }
 
 void kvm_apic_accept_events(struct kvm_vcpu *vcpu)
arch/x86/kvm/lapic.h +1 -1
index ed0ed39abd369..ff6ef9c3d760c 100644
@@ -120,7 +120,7 @@ static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu)
 	return vcpu->arch.hyperv.hv_vapic & HV_X64_MSR_VP_ASSIST_PAGE_ENABLE;
 }
 
-int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data);
+int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data, unsigned long len);
 void kvm_lapic_init(void);
 void kvm_lapic_exit(void);
 
arch/x86/kvm/x86.c +1 -1
index e10a7a42449b3..ed6b43f344b0c 100644
@@ -2494,7 +2494,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 
 		break;
 	case MSR_KVM_PV_EOI_EN:
-		if (kvm_lapic_enable_pv_eoi(vcpu, data))
+		if (kvm_lapic_enable_pv_eoi(vcpu, data, sizeof(u8)))
 			return 1;
 		break;
 
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 15/167 x86/kvm/lapic: preserve gfn_to_hva_cache len on cache reinit

In reply to Sasha Levin

From: Vitaly Kuznetsov <[email protected]>

[ Upstream commit a7c42bb6da6b1b54b2e7bd567636d72d87b10a79 ]

vcpu->arch.pv_eoi is accessible through both HV_X64_MSR_VP_ASSIST_PAGE and MSR_KVM_PV_EOI_EN so on migration userspace may try to restore them in any order. Values match, however, kvm_lapic_enable_pv_eoi() uses different
length: for Hyper-V case it's the whole struct hv_vp_assist_page, for KVM native case it is 8. In case we restore KVM-native MSR last cache will be reinitialized with len=8 so trying to access VP assist page beyond 8 bytes with kvm_read_guest_cached() will fail.

Check if we re-initializing cache for the same address and preserve length in case it was greater.

---
 arch/x86/kvm/lapic.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
arch/x86/kvm/lapic.c +10 -2
index ccf5a04de94c3..973a244081d34 100644
@@ -2631,14 +2631,22 @@ int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 reg, u64 *data)
 int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data, unsigned long len)
 {
 	u64 addr = data & ~KVM_MSR_ENABLED;
+	struct gfn_to_hva_cache *ghc = &vcpu->arch.pv_eoi.data;
+	unsigned long new_len;
+
 	if (!IS_ALIGNED(addr, 4))
 		return 1;
 
 	vcpu->arch.pv_eoi.msr_val = data;
 	if (!pv_eoi_enabled(vcpu))
 		return 0;
-	return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
-					 addr, len);
+
+	if (addr == ghc->gpa && len <= ghc->len)
+		new_len = ghc->len;
+	else
+		new_len = len;
+
+	return kvm_gfn_to_hva_cache_init(vcpu->kvm, ghc, addr, new_len);
 }
 
 void kvm_apic_accept_events(struct kvm_vcpu *vcpu)
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/167 KVM: x86: hyperv: keep track of mismatched VP indexes

In reply to Sasha Levin

From: Vitaly Kuznetsov <[email protected]>

[ Upstream commit 87ee613d076351950b74383215437f841ebbeb75 ]

In most common cases VP index of a vcpu matches its vcpu index. Userspace is, however, free to set any mapping it wishes and we need to account for that when we need to find a vCPU with a particular VP index. To keep search algorithms optimal in both cases introduce 'num_mismatched_vp_indexes' counter showing how many vCPUs with mismatching VP index we have. In case the counter is zero we can assume vp_index == vcpu_idx.

---
 arch/x86/include/asm/kvm_host.h |  3 +++
 arch/x86/kvm/hyperv.c           | 26 +++++++++++++++++++++++---
 2 files changed, 26 insertions(+), 3 deletions(-)
arch/x86/include/asm/kvm_host.h +3 -0
index 3245b95ad2d97..b6417454a9d79 100644
@@ -784,6 +784,9 @@ struct kvm_hv {
 	u64 hv_reenlightenment_control;
 	u64 hv_tsc_emulation_control;
 	u64 hv_tsc_emulation_status;
+
+	/* How many vCPUs have VP index != vCPU index */
+	atomic_t num_mismatched_vp_indexes;
 };
 
 enum kvm_irqchip_mode {
arch/x86/kvm/hyperv.c +23 -3
index 3f2775aac5545..2bb554b90b3c2 100644
@@ -1045,11 +1045,31 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host)
 	struct kvm_vcpu_hv *hv_vcpu = &vcpu->arch.hyperv;
 
 	switch (msr) {
-	case HV_X64_MSR_VP_INDEX:
-		if (!host || (u32)data >= KVM_MAX_VCPUS)
+	case HV_X64_MSR_VP_INDEX: {
+		struct kvm_hv *hv = &vcpu->kvm->arch.hyperv;
+		int vcpu_idx = kvm_vcpu_get_idx(vcpu);
+		u32 new_vp_index = (u32)data;
+
+		if (!host || new_vp_index >= KVM_MAX_VCPUS)
 			return 1;
-		hv_vcpu->vp_index = (u32)data;
+
+		if (new_vp_index == hv_vcpu->vp_index)
+			return 0;
+
+		/*
+		 * The VP index is initialized to vcpu_index by
+		 * kvm_hv_vcpu_postcreate so they initially match.  Now the
+		 * VP index is changing, adjust num_mismatched_vp_indexes if
+		 * it now matches or no longer matches vcpu_idx.
+		 */
+		if (hv_vcpu->vp_index == vcpu_idx)
+			atomic_inc(&hv->num_mismatched_vp_indexes);
+		else if (new_vp_index == vcpu_idx)
+			atomic_dec(&hv->num_mismatched_vp_indexes);
+
+		hv_vcpu->vp_index = new_vp_index;
 		break;
+	}
 	case HV_X64_MSR_VP_ASSIST_PAGE: {
 		u64 gfn;
 		unsigned long addr;
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 19/167 drm/atomic_helper: Disallow new modesets on unregistered connectors

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit 4d80273976bf880c4bed9359b8f2d45663140c86 ]

With the exception of modesets which would switch the DPMS state of a connector from on to off, we want to make sure that we disallow all modesets which would result in enabling a new monitor or a new mode configuration on a monitor if the connector for the display in question is no longer registered. This allows us to stop userspace from trying to enable new displays on connectors for an MST topology that were just removed from the system, without preventing userspace from disabling DPMS on those connectors.

Changes since v5:
- Fix typo in comment, nothing else

---
 drivers/gpu/drm/drm_atomic_helper.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_atomic_helper.c +20 -1
index c22062cc99923..71c70a031a043 100644
@@ -307,6 +307,26 @@ update_connector_routing(struct drm_atomic_state *state,
 		return 0;
 	}
 
+	crtc_state = drm_atomic_get_new_crtc_state(state,
+						   new_connector_state->crtc);
+	/*
+	 * For compatibility with legacy users, we want to make sure that
+	 * we allow DPMS On->Off modesets on unregistered connectors. Modesets
+	 * which would result in anything else must be considered invalid, to
+	 * avoid turning on new displays on dead connectors.
+	 *
+	 * Since the connector can be unregistered at any point during an
+	 * atomic check or commit, this is racy. But that's OK: all we care
+	 * about is ensuring that userspace can't do anything but shut off the
+	 * display on a connector that was destroyed after its been notified,
+	 * not before.
+	 */
+	if (!READ_ONCE(connector->registered) && crtc_state->active) {
+		DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
+				 connector->base.id, connector->name);
+		return -EINVAL;
+	}
+
 	funcs = connector->helper_private;
 
 	if (funcs->atomic_best_encoder)
@@ -351,7 +371,6 @@ update_connector_routing(struct drm_atomic_state *state,
 
 	set_best_encoder(state, new_connector_state, new_encoder);
 
-	crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc);
 	crtc_state->connectors_changed = true;
 
 	DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#20 lore raw

PATCH 21/167 Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up

In reply to Sasha Levin

From: Dexuan Cui <[email protected]>

[ Upstream commit e670de54c813b5bc3672dd1c67871dc60e9206f4 ]

In kvp_send_key(), we do need call process_ib_ipinfo() if message->kvp_hdr.operation is KVP_OP_GET_IP_INFO, because it turns out the userland hv_kvp_daemon needs the info of operation, adapter_id and addr_family. With the incorrect fc62c3b1977d, the host can't get the VM's IP via KVP.

And, fc62c3b1977d added a "break;", but actually forgot to initialize the key_size/value in the case of KVP_OP_SET, so the default key_size of 0 is passed to the kvp daemon, and the pool files /var/lib/hyperv/.kvp_pool_* can't be updated.

This patch effectively rolls back the previous fc62c3b1977d, and correctly fixes the "this statement may fall through" warnings.

This patch is tested on WS 2012 R2 and 2016.

Fixes fc62c3b1977d ("Drivers: hv: kvp: Fix two "this statement may fall through" warnings")
Cc K. Y. Srinivasan <[email protected]>
Cc Stephen Hemminger <[email protected]>
---
 drivers/hv/hv_kvp.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)
drivers/hv/hv_kvp.c +22 -4
index a7513a8a8e372..d6106e1a0d4af 100644
@@ -353,6 +353,9 @@ static void process_ib_ipinfo(void *in_msg, void *out_msg, int op)
 
 		out->body.kvp_ip_val.dhcp_enabled = in->kvp_ip_val.dhcp_enabled;
 
+		/* fallthrough */
+
+	case KVP_OP_GET_IP_INFO:
 		utf16s_to_utf8s((wchar_t *)in->kvp_ip_val.adapter_id,
 				MAX_ADAPTER_ID_SIZE,
 				UTF16_LITTLE_ENDIAN,
@@ -405,7 +408,11 @@ kvp_send_key(struct work_struct *dummy)
 		process_ib_ipinfo(in_msg, message, KVP_OP_SET_IP_INFO);
 		break;
 	case KVP_OP_GET_IP_INFO:
-		/* We only need to pass on message->kvp_hdr.operation.  */
+		/*
+		 * We only need to pass on the info of operation, adapter_id
+		 * and addr_family to the userland kvp daemon.
+		 */
+		process_ib_ipinfo(in_msg, message, KVP_OP_GET_IP_INFO);
 		break;
 	case KVP_OP_SET:
 		switch (in_msg->body.kvp_set.data.value_type) {
@@ -446,9 +453,9 @@ kvp_send_key(struct work_struct *dummy)
 
 		}
 
-		break;
-
-	case KVP_OP_GET:
+		/*
+		 * The key is always a string - utf16 encoding.
+		 */
 		message->body.kvp_set.data.key_size =
 			utf16s_to_utf8s(
 			(wchar_t *)in_msg->body.kvp_set.data.key,
@@ -456,6 +463,17 @@ kvp_send_key(struct work_struct *dummy)
 			UTF16_LITTLE_ENDIAN,
 			message->body.kvp_set.data.key,
 			HV_KVP_EXCHANGE_MAX_KEY_SIZE - 1) + 1;
+
+		break;
+
+	case KVP_OP_GET:
+		message->body.kvp_get.data.key_size =
+			utf16s_to_utf8s(
+			(wchar_t *)in_msg->body.kvp_get.data.key,
+			in_msg->body.kvp_get.data.key_size,
+			UTF16_LITTLE_ENDIAN,
+			message->body.kvp_get.data.key,
+			HV_KVP_EXCHANGE_MAX_KEY_SIZE - 1) + 1;
 		break;
 
 	case KVP_OP_DELETE:
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 29/167 ARM: davinci: dm644x: define gpio interrupts as separate resources

In reply to Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit adcf60ce14c8250761af9de907eb6c7d096c26d3 ]

Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range.

Fixes eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
---
 arch/arm/mach-davinci/dm644x.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm/mach-davinci/dm644x.c +20 -0
index 0720da7809a69..de1ec6dc01e94 100644
@@ -492,6 +492,26 @@ static struct resource dm644_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 31/167 media: vim2m: use workqueue

In reply to Sasha Levin

From: Hans Verkuil <[email protected]>

[ Upstream commit 144bd0ee304c7d0690eec285aee93019d3f30fc8 ]

v4l2_ctrl uses mutexes, so we can't setup a ctrl_handler in interrupt context. Switch to a workqueue instead and drop the timer.

---
 drivers/media/platform/vim2m.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)
drivers/media/platform/vim2m.c +10 -15
index 462099a141e4a..6f87ef025ff19 100644
@@ -3,7 +3,8 @@
  *
  * This is a virtual device driver for testing mem-to-mem videobuf framework.
  * It simulates a device that uses memory buffers for both source and
- * destination, processes the data and issues an "irq" (simulated by a timer).
+ * destination, processes the data and issues an "irq" (simulated by a delayed
+ * workqueue).
  * The device is capable of multi-instance, multi-buffer-per-transaction
  * operation (via the mem2mem framework).
  *
@@ -19,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
-#include <linux/timer.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 
@@ -148,7 +148,7 @@ struct vim2m_dev {
 	struct mutex		dev_mutex;
 	spinlock_t		irqlock;
 
-	struct timer_list	timer;
+	struct delayed_work	work_run;
 
 	struct v4l2_m2m_dev	*m2m_dev;
 };
@@ -336,12 +336,6 @@ static int device_process(struct vim2m_ctx *ctx,
 	return 0;
 }
 
-static void schedule_irq(struct vim2m_dev *dev, int msec_timeout)
-{
-	dprintk(dev, "Scheduling a simulated irq\n");
-	mod_timer(&dev->timer, jiffies + msecs_to_jiffies(msec_timeout));
-}
-
 /*
  * mem2mem callbacks
  */
@@ -387,13 +381,14 @@ static void device_run(void *priv)
 
 	device_process(ctx, src_buf, dst_buf);
 
-	/* Run a timer, which simulates a hardware irq  */
-	schedule_irq(dev, ctx->transtime);
+	/* Run delayed work, which simulates a hardware irq  */
+	schedule_delayed_work(&dev->work_run, msecs_to_jiffies(ctx->transtime));
 }
 
-static void device_isr(struct timer_list *t)
+static void device_work(struct work_struct *w)
 {
-	struct vim2m_dev *vim2m_dev = from_timer(vim2m_dev, t, timer);
+	struct vim2m_dev *vim2m_dev =
+		container_of(w, struct vim2m_dev, work_run.work);
 	struct vim2m_ctx *curr_ctx;
 	struct vb2_v4l2_buffer *src_vb, *dst_vb;
 	unsigned long flags;
@@ -805,6 +800,7 @@ static void vim2m_stop_streaming(struct vb2_queue *q)
 	struct vb2_v4l2_buffer *vbuf;
 	unsigned long flags;
 
+	flush_scheduled_work();
 	for (;;) {
 		if (V4L2_TYPE_IS_OUTPUT(q->type))
 			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
@@ -1015,6 +1011,7 @@ static int vim2m_probe(struct platform_device *pdev)
 	vfd = &dev->vfd;
 	vfd->lock = &dev->dev_mutex;
 	vfd->v4l2_dev = &dev->v4l2_dev;
+	INIT_DELAYED_WORK(&dev->work_run, device_work);
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
 	if (ret) {
@@ -1026,7 +1023,6 @@ static int vim2m_probe(struct platform_device *pdev)
 	v4l2_info(&dev->v4l2_dev,
 			"Device registered as /dev/video%d\n", vfd->num);
 
-	timer_setup(&dev->timer, device_isr, 0);
 	platform_set_drvdata(pdev, dev);
 
 	dev->m2m_dev = v4l2_m2m_init(&m2m_ops);
@@ -1083,7 +1079,6 @@ static int vim2m_remove(struct platform_device *pdev)
 	media_device_cleanup(&dev->mdev);
 #endif
 	v4l2_m2m_release(dev->m2m_dev);
-	del_timer_sync(&dev->timer);
 	video_unregister_device(&dev->vfd);
 	v4l2_device_unregister(&dev->v4l2_dev);
 
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 28/167 ARM: davinci: dm355: define gpio interrupts as separate resources

In reply to Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit 27db7baab640ea28d7994eda943fef170e347081 ]

Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range.

Fixes eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
---
 arch/arm/mach-davinci/dm355.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
arch/arm/mach-davinci/dm355.c +30 -0
index 9f7d38d12c888..2b0f5d97ab7c1 100644
@@ -548,6 +548,36 @@ static struct resource dm355_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 41/167 scsi: megaraid_sas: Add check for reset adapter bit

In reply to Sasha Levin

From: Shivasharan S <[email protected]>

[ Upstream commit de93b40d98ead27ee2f7f7df93fdd4914a6c8d8d ]

For SAS3 and later controllers, FW sets the reset adapter bit indicating the driver to perform a controller reset. Driver needs to check if this bit is set before doing a reset. This reduces the driver probe failure time to 180seconds in case there is a faulty controller connected.

---
 drivers/scsi/megaraid/megaraid_sas_base.c | 33 +++++++++++++++--------
 1 file changed, 22 insertions(+), 11 deletions(-)
drivers/scsi/megaraid/megaraid_sas_base.c +22 -11
index b6fc7c6337610..749f10146f630 100644
@@ -5218,7 +5218,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 {
 	u32 max_sectors_1;
 	u32 max_sectors_2, tmp_sectors, msix_enable;
-	u32 scratch_pad_2, scratch_pad_3, scratch_pad_4;
+	u32 scratch_pad_2, scratch_pad_3, scratch_pad_4, status_reg;
 	resource_size_t base_addr;
 	struct megasas_register_set __iomem *reg_set;
 	struct megasas_ctrl_info *ctrl_info = NULL;
@@ -5226,6 +5226,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	int i, j, loop, fw_msix_count = 0;
 	struct IOV_111 *iovPtr;
 	struct fusion_context *fusion;
+	bool do_adp_reset = true;
 
 	fusion = instance->ctrl_context;
 
@@ -5274,19 +5275,29 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	}
 
 	if (megasas_transition_to_ready(instance, 0)) {
-		atomic_set(&instance->fw_reset_no_pci_access, 1);
-		instance->instancet->adp_reset
-			(instance, instance->reg_set);
-		atomic_set(&instance->fw_reset_no_pci_access, 0);
-		dev_info(&instance->pdev->dev,
-			"FW restarted successfully from %s!\n",
-			__func__);
+		if (instance->adapter_type >= INVADER_SERIES) {
+			status_reg = instance->instancet->read_fw_status_reg(
+					instance->reg_set);
+			do_adp_reset = status_reg & MFI_RESET_ADAPTER;
+		}
 
-		/*waitting for about 30 second before retry*/
-		ssleep(30);
+		if (do_adp_reset) {
+			atomic_set(&instance->fw_reset_no_pci_access, 1);
+			instance->instancet->adp_reset
+				(instance, instance->reg_set);
+			atomic_set(&instance->fw_reset_no_pci_access, 0);
+			dev_info(&instance->pdev->dev,
+				 "FW restarted successfully from %s!\n",
+				 __func__);
+
+			/*waiting for about 30 second before retry*/
+			ssleep(30);
 
-		if (megasas_transition_to_ready(instance, 0))
+			if (megasas_transition_to_ready(instance, 0))
+				goto fail_ready_state;
+		} else {
 			goto fail_ready_state;
+		}
 	}
 
 	megasas_init_ctrl_params(instance);
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 32/167 media: vim2m: use cancel_delayed_work_sync instead of flush_schedule_work

In reply to Sasha Levin

From: Hans Verkuil <[email protected]>

[ Upstream commit 52117be68b82ee05c96da0a7beec319906ccf6cc ]

The use of flush_schedule_work() made no sense and caused a syzkaller error. Replace with the correct cancel_delayed_work_sync().

---
 drivers/media/platform/vim2m.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/platform/vim2m.c +2 -1
index 6f87ef025ff19..de7f9fe7e7cd9 100644
@@ -797,10 +797,11 @@ static int vim2m_start_streaming(struct vb2_queue *q, unsigned count)
 static void vim2m_stop_streaming(struct vb2_queue *q)
 {
 	struct vim2m_ctx *ctx = vb2_get_drv_priv(q);
+	struct vim2m_dev *dev = ctx->dev;
 	struct vb2_v4l2_buffer *vbuf;
 	unsigned long flags;
 
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&dev->work_run);
 	for (;;) {
 		if (V4L2_TYPE_IS_OUTPUT(q->type))
 			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 38/167 btrfs: Remove extent_io_ops::fill_delalloc

In reply to Sasha Levin

From: Nikolay Borisov <[email protected]>

[ Upstream commit 5eaad97af8aeff38debe7d3c69ec3a0d71f8350f ]

This callback is called only from writepage_delalloc which in turn is guaranteed to be called from the data page writeout path. In the end there is no reason to have the call to this function to be indrected via the extent_io_ops structure. This patch removes the callback definition, exports the function and calls it directly. No functional changes.

---
 fs/btrfs/ctree.h     |  3 +++
 fs/btrfs/extent_io.c | 20 +++++++++-----------
 fs/btrfs/extent_io.h |  5 -----
 fs/btrfs/inode.c     | 15 +++++++--------
 4 files changed, 19 insertions(+), 24 deletions(-)
fs/btrfs/ctree.h +3 -0
index 82682da5a40dd..4644f9b629a53 100644
@@ -3200,6 +3200,9 @@ int btrfs_prealloc_file_range_trans(struct inode *inode,
 				    struct btrfs_trans_handle *trans, int mode,
 				    u64 start, u64 num_bytes, u64 min_size,
 				    loff_t actual_len, u64 *alloc_hint);
+int btrfs_run_delalloc_range(void *private_data, struct page *locked_page,
+		u64 start, u64 end, int *page_started, unsigned long *nr_written,
+		struct writeback_control *wbc);
 extern const struct dentry_operations btrfs_dentry_operations;
 #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
 void btrfs_test_inode_set_ops(struct inode *inode);
fs/btrfs/extent_io.c +9 -11
index 90b0a6eff5350..cb598eb4f3bd1 100644
@@ -3199,7 +3199,7 @@ static void update_nr_written(struct writeback_control *wbc,
 /*
  * helper for __extent_writepage, doing all of the delayed allocation setup.
  *
- * This returns 1 if our fill_delalloc function did all the work required
+ * This returns 1 if btrfs_run_delalloc_range function did all the work required
  * to write the page (copy into inline extent).  In this case the IO has
  * been started and the page is already unlocked.
  *
@@ -3220,7 +3220,7 @@ static noinline_for_stack int writepage_delalloc(struct inode *inode,
 	int ret;
 	int page_started = 0;
 
-	if (epd->extent_locked || !tree->ops || !tree->ops->fill_delalloc)
+	if (epd->extent_locked)
 		return 0;
 
 	while (delalloc_end < page_end) {
@@ -3233,18 +3233,16 @@ static noinline_for_stack int writepage_delalloc(struct inode *inode,
 			delalloc_start = delalloc_end + 1;
 			continue;
 		}
-		ret = tree->ops->fill_delalloc(inode, page,
-					       delalloc_start,
-					       delalloc_end,
-					       &page_started,
-					       nr_written, wbc);
+		ret = btrfs_run_delalloc_range(inode, page, delalloc_start,
+				delalloc_end, &page_started, nr_written, wbc);
 		/* File system has been set read-only */
 		if (ret) {
 			SetPageError(page);
-			/* fill_delalloc should be return < 0 for error
-			 * but just in case, we use > 0 here meaning the
-			 * IO is started, so we don't want to return > 0
-			 * unless things are going well.
+			/*
+			 * btrfs_run_delalloc_range should return < 0 for error
+			 * but just in case, we use > 0 here meaning the IO is
+			 * started, so we don't want to return > 0 unless
+			 * things are going well.
 			 */
 			ret = ret < 0 ? ret : -EIO;
 			goto done;
fs/btrfs/extent_io.h +0 -5
index b4d03e677e1d7..ed27becd963c5 100644
@@ -106,11 +106,6 @@ struct extent_io_ops {
 	/*
 	 * Optional hooks, called if the pointer is not NULL
 	 */
-	int (*fill_delalloc)(void *private_data, struct page *locked_page,
-			     u64 start, u64 end, int *page_started,
-			     unsigned long *nr_written,
-			     struct writeback_control *wbc);
-
 	int (*writepage_start_hook)(struct page *page, u64 start, u64 end);
 	void (*writepage_end_io_hook)(struct page *page, u64 start, u64 end,
 				      struct extent_state *state, int uptodate);
fs/btrfs/inode.c +7 -8
index 355ff08e9d44e..bfacce295ef1e 100644
@@ -110,8 +110,8 @@ static void __endio_write_update_ordered(struct inode *inode,
  * extent_clear_unlock_delalloc() to clear both the bits EXTENT_DO_ACCOUNTING
  * and EXTENT_DELALLOC simultaneously, because that causes the reserved metadata
  * to be released, which we want to happen only when finishing the ordered
- * extent (btrfs_finish_ordered_io()). Also note that the caller of the
- * fill_delalloc() callback already does proper cleanup for the first page of
+ * extent (btrfs_finish_ordered_io()). Also note that the caller of
+ * btrfs_run_delalloc_range already does proper cleanup for the first page of
  * the range, that is, it invokes the callback writepage_end_io_hook() for the
  * range of the first page.
  */
@@ -1599,12 +1599,12 @@ static inline int need_force_cow(struct inode *inode, u64 start, u64 end)
 }
 
 /*
- * extent_io.c call back to do delayed allocation processing
+ * Function to process delayed allocation (create CoW) for ranges which are
+ * being touched for the first time.
  */
-static int run_delalloc_range(void *private_data, struct page *locked_page,
-			      u64 start, u64 end, int *page_started,
-			      unsigned long *nr_written,
-			      struct writeback_control *wbc)
+int btrfs_run_delalloc_range(void *private_data, struct page *locked_page,
+		u64 start, u64 end, int *page_started, unsigned long *nr_written,
+		struct writeback_control *wbc)
 {
 	struct inode *inode = private_data;
 	int ret;
@@ -10598,7 +10598,6 @@ static const struct extent_io_ops btrfs_extent_io_ops = {
 	.readpage_io_failed_hook = btrfs_readpage_io_failed_hook,
 
 	/* optional callbacks */
-	.fill_delalloc = run_delalloc_range,
 	.writepage_end_io_hook = btrfs_writepage_end_io_hook,
 	.writepage_start_hook = btrfs_writepage_start_hook,
 	.set_bit_hook = btrfs_set_bit_hook,
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 46/167 btrfs: volumes: Make sure no dev extent is beyond device boundary

In reply to Sasha Levin

From: Qu Wenruo <[email protected]>

[ Upstream commit 05a37c48604c19b50873fd9663f9140c150469d1 ]

Add extra dev extent end check against device boundary.

---
 fs/btrfs/volumes.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
fs/btrfs/volumes.c +17 -0
index 6e008bd5c8cd1..c20708bfae561 100644
@@ -7411,6 +7411,7 @@ static int verify_one_dev_extent(struct btrfs_fs_info *fs_info,
 	struct extent_map_tree *em_tree = &fs_info->mapping_tree.map_tree;
 	struct extent_map *em;
 	struct map_lookup *map;
+	struct btrfs_device *dev;
 	u64 stripe_len;
 	bool found = false;
 	int ret = 0;
@@ -7460,6 +7461,22 @@ static int verify_one_dev_extent(struct btrfs_fs_info *fs_info,
 			physical_offset, devid);
 		ret = -EUCLEAN;
 	}
+
+	/* Make sure no dev extent is beyond device bondary */
+	dev = btrfs_find_device(fs_info, devid, NULL, NULL);
+	if (!dev) {
+		btrfs_err(fs_info, "failed to find devid %llu", devid);
+		ret = -EUCLEAN;
+		goto out;
+	}
+	if (physical_offset + physical_len > dev->disk_total_bytes) {
+		btrfs_err(fs_info,
+"dev extent devid %llu physical offset %llu len %llu is beyond device boundary %llu",
+			  devid, physical_offset, physical_len,
+			  dev->disk_total_bytes);
+		ret = -EUCLEAN;
+		goto out;
+	}
 out:
 	free_extent_map(em);
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 52/167 ALSA: pcm: Update hardware pointer before start capture

In reply to Sasha Levin

From: Ricardo Biehl Pasquali <[email protected]>

[ Upstream commit 64b6acf60b665fffd419c23886a1cbeeb253cfb4 ]

This ensures the transfer loop won't waste a run to read the few frames (if any) between start and hw_ptr update. It will wait for the next interrupt with wait_for_avail().

---
 sound/core/pcm_lib.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
sound/core/pcm_lib.c +5 -3
index 7f71c2449af5e..40013b26f6719 100644
@@ -2172,6 +2172,10 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(struct snd_pcm_substream *substream,
 	if (err < 0)
 		goto _end_unlock;
 
+	runtime->twake = runtime->control->avail_min ? : 1;
+	if (runtime->status->state == SNDRV_PCM_STATE_RUNNING)
+		snd_pcm_update_hw_ptr(substream);
+
 	if (!is_playback &&
 	    runtime->status->state == SNDRV_PCM_STATE_PREPARED) {
 		if (size >= runtime->start_threshold) {
@@ -2185,10 +2189,8 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(struct snd_pcm_substream *substream,
 		}
 	}
 
-	runtime->twake = runtime->control->avail_min ? : 1;
-	if (runtime->status->state == SNDRV_PCM_STATE_RUNNING)
-		snd_pcm_update_hw_ptr(substream);
 	avail = snd_pcm_avail(substream);
+
 	while (size > 0) {
 		snd_pcm_uframes_t frames, appl_ptr, appl_ofs;
 		snd_pcm_uframes_t cont;
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 56/167 crypto: ccree - fix resume race condition on init

In reply to Sasha Levin

From: Gilad Ben-Yossef <[email protected]>

[ Upstream commit 1358c13a48c43f5e4de0c1835291837a27b9720c ]

We were enabling autosuspend, which is using data set by the hash module, prior to the hash module being inited, casuing a crash on resume as part of the startup sequence if the race was lost.

This was never a real problem because the PM infra was using low res timers so we were always winning the race, until commit 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") changed that :-)

Fix this by seperating the PM setup and enablement and doing the latter only at the end of the init sequence.

---
 drivers/crypto/ccree/cc_driver.c |  7 ++++---
 drivers/crypto/ccree/cc_pm.c     | 13 ++++++-------
 drivers/crypto/ccree/cc_pm.h     |  3 +++
 3 files changed, 13 insertions(+), 10 deletions(-)
drivers/crypto/ccree/cc_driver.c +4 -3
index 1ff229c2aeab1..186a2536fb8b9 100644
@@ -364,7 +364,7 @@ static int init_cc_resources(struct platform_device *plat_dev)
 	rc = cc_ivgen_init(new_drvdata);
 	if (rc) {
 		dev_err(dev, "cc_ivgen_init failed\n");
-		goto post_power_mgr_err;
+		goto post_buf_mgr_err;
 	}
 
 	/* Allocate crypto algs */
@@ -387,6 +387,9 @@ static int init_cc_resources(struct platform_device *plat_dev)
 		goto post_hash_err;
 	}
 
+	/* All set, we can allow autosuspend */
+	cc_pm_go(new_drvdata);
+
 	/* If we got here and FIPS mode is enabled
 	 * it means all FIPS test passed, so let TEE
 	 * know we're good.
@@ -401,8 +404,6 @@ static int init_cc_resources(struct platform_device *plat_dev)
 	cc_cipher_free(new_drvdata);
 post_ivgen_err:
 	cc_ivgen_fini(new_drvdata);
-post_power_mgr_err:
-	cc_pm_fini(new_drvdata);
 post_buf_mgr_err:
 	 cc_buffer_mgr_fini(new_drvdata);
 post_req_mgr_err:
drivers/crypto/ccree/cc_pm.c +6 -7
index 79fc0a37ba6e4..638082dff183a 100644
@@ -103,20 +103,19 @@ int cc_pm_put_suspend(struct device *dev)
 
 int cc_pm_init(struct cc_drvdata *drvdata)
 {
-	int rc = 0;
 	struct device *dev = drvdata_to_dev(drvdata);
 
 	/* must be before the enabling to avoid resdundent suspending */
 	pm_runtime_set_autosuspend_delay(dev, CC_SUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(dev);
 	/* activate the PM module */
-	rc = pm_runtime_set_active(dev);
-	if (rc)
-		return rc;
-	/* enable the PM module*/
-	pm_runtime_enable(dev);
+	return pm_runtime_set_active(dev);
+}
 
-	return rc;
+/* enable the PM module*/
+void cc_pm_go(struct cc_drvdata *drvdata)
+{
+	pm_runtime_enable(drvdata_to_dev(drvdata));
 }
 
 void cc_pm_fini(struct cc_drvdata *drvdata)
drivers/crypto/ccree/cc_pm.h +3 -0
index 020a5403c58ba..f626243570209 100644
@@ -16,6 +16,7 @@
 extern const struct dev_pm_ops ccree_pm;
 
 int cc_pm_init(struct cc_drvdata *drvdata);
+void cc_pm_go(struct cc_drvdata *drvdata);
 void cc_pm_fini(struct cc_drvdata *drvdata);
 int cc_pm_suspend(struct device *dev);
 int cc_pm_resume(struct device *dev);
@@ -29,6 +30,8 @@ static inline int cc_pm_init(struct cc_drvdata *drvdata)
 	return 0;
 }
 
+static void cc_pm_go(struct cc_drvdata *drvdata) {}
+
 static inline void cc_pm_fini(struct cc_drvdata *drvdata) {}
 
 static inline int cc_pm_suspend(struct device *dev)
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 54/167 IB/uverbs: Fix OOPs upon device disassociation

In reply to Sasha Levin

From: Yishai Hadas <[email protected]>

[ Upstream commit 425784aa5b029eeb80498c73a68f62c3ad1d3b3f ]

The async_file might be freed before the disassociation has been ended, causing qp shutdown to use after free on it.

Since uverbs_destroy_ufile_hw is not a fence, it returns if a disassociation is ongoing in another thread. It has to be written this way to avoid deadlock. However this means that the ufile FD close cannot destroy anything that may still be used by an active kref, such as the the async_file.

To fix that move the kref_put() to be in ib_uverbs_release_file().

 BUG: unable to handle kernel paging request at ffffffffba682787
 PGD bc80e067 P4D bc80e067 PUD bc80f063 PMD 1313df163 PTE 80000000bc682061
 Oops: 0003 [#1] SMP PTI
 CPU: 1 PID: 32410 Comm: bash Tainted: G           OE 4.20.0-rc6+ #3
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:__pv_queued_spin_lock_slowpath+0x1b3/0x2a0
 Code: 98 83 e2 60 49 89 df 48 8b 04 c5 80 18 72 ba 48 8d
		ba 80 32 02 00 ba 00 80 00 00 4c 8d 65 14 41 bd 01 00 00 00 48 01 c7 85
		d2 <48> 89 2f 48 89 fb 74 14 8b 45 08 85 c0 75 42 84 d2 74 6b f3 90 83
 RSP: 0018:ffffc1bbc064fb58 EFLAGS: 00010006
 RAX: ffffffffba65f4e7 RBX: ffff9f209c656c00 RCX: 0000000000000001
 RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffffffffba682787
 RBP: ffff9f217bb23280 R08: 0000000000000001 R09: 0000000000000000
 R10: ffff9f209d2c7800 R11: ffffffffffffffe8 R12: ffff9f217bb23294
 R13: 0000000000000001 R14: 0000000000000000 R15: ffff9f209c656c00
 FS:  00007fac55aad740(0000) GS:ffff9f217bb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffffba682787 CR3: 000000012f8e0000 CR4: 00000000000006e0
 Call Trace:
  _raw_spin_lock_irq+0x27/0x30
  ib_uverbs_release_uevent+0x1e/0xa0 [ib_uverbs]
  uverbs_free_qp+0x7e/0x90 [ib_uverbs]
  destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs]
  uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs]
  __uverbs_cleanup_ufile+0x73/0x90 [ib_uverbs]
  uverbs_destroy_ufile_hw+0x5d/0x120 [ib_uverbs]
  ib_uverbs_remove_one+0xea/0x240 [ib_uverbs]
  ib_unregister_device+0xfb/0x200 [ib_core]
  mlx5_ib_remove+0x51/0xe0 [mlx5_ib]
  mlx5_remove_device+0xc1/0xd0 [mlx5_core]
  mlx5_unregister_device+0x3d/0xb0 [mlx5_core]
  remove_one+0x2a/0x90 [mlx5_core]
  pci_device_remove+0x3b/0xc0
  device_release_driver_internal+0x16d/0x240
  unbind_store+0xb2/0x100
  kernfs_fop_write+0x102/0x180
  __vfs_write+0x36/0x1a0
  ? __alloc_fd+0xa9/0x170
  ? set_close_on_exec+0x49/0x70
  vfs_write+0xad/0x1a0
  ksys_write+0x52/0xc0
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fac551aac60
Fixes 036b10635739 ("IB/uverbs: Enable device removal when there are active user space applications")
---
 drivers/infiniband/core/uverbs_main.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/infiniband/core/uverbs_main.c +3 -4
index 50152c1b10045..357de3b4fdddf 100644
@@ -265,6 +265,9 @@ void ib_uverbs_release_file(struct kref *ref)
 	if (atomic_dec_and_test(&file->device->refcount))
 		ib_uverbs_comp_dev(file->device);
 
+	if (file->async_file)
+		kref_put(&file->async_file->ref,
+			 ib_uverbs_release_async_event_file);
 	kobject_put(&file->device->kobj);
 	kfree(file);
 }
@@ -915,10 +918,6 @@ static int ib_uverbs_close(struct inode *inode, struct file *filp)
 	}
 	mutex_unlock(&file->device->lists_mutex);
 
-	if (file->async_file)
-		kref_put(&file->async_file->ref,
-			 ib_uverbs_release_async_event_file);
-
 	kref_put(&file->ref, ib_uverbs_release_file);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 57/167 ALSA: pcm: Revert capture stream behavior change in blocking mode

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 00a399cad1a063e7665f06b6497a807db20441fd ]

In the commit 62ba568f7aef ("ALSA: pcm: Return 0 when size < start_threshold in capture"), we changed the behavior of __snd_pcm_lib_xfer() to return immediately with 0 when a capture stream has a high start_threshold. This was intended to be a correction of the behavior consistency and looked harmless, but this was the culprit of the recent breakage reported by syzkaller, which was fixed by the commit e190161f96b8 ("ALSA: pcm: Fix tight loop of OSS capture stream").

At the time for the OSS fix, I didn't touch the behavior for ALSA native API, as assuming that this behavior actually is good. But this turned out to be also broken actually for a similar deployment, e.g. one thread goes to a write loop in blocking mode while another thread controls the start/stop of the stream manually.

Overall, the original commit is harmful, and it brings less merit to keep that behavior. Let's revert it.

Fixes 62ba568f7aef ("ALSA: pcm: Return 0 when size < start_threshold in capture")
Fixes e190161f96b8 ("ALSA: pcm: Fix tight loop of OSS capture stream")
---
 sound/core/pcm_lib.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
sound/core/pcm_lib.c +4 -16
index 6c99fa8ac5fa1..6c0b30391ba99 100644
@@ -2112,13 +2112,6 @@ int pcm_lib_apply_appl_ptr(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-/* allow waiting for a capture stream that hasn't been started */
-#if IS_ENABLED(CONFIG_SND_PCM_OSS)
-#define wait_capture_start(substream)	((substream)->oss.oss)
-#else
-#define wait_capture_start(substream)	false
-#endif
-
 /* the common loop for read/write data */
 snd_pcm_sframes_t __snd_pcm_lib_xfer(struct snd_pcm_substream *substream,
 				     void *data, bool interleaved,
@@ -2184,16 +2177,11 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(struct snd_pcm_substream *substream,
 		snd_pcm_update_hw_ptr(substream);
 
 	if (!is_playback &&
-	    runtime->status->state == SNDRV_PCM_STATE_PREPARED) {
-		if (size >= runtime->start_threshold) {
-			err = snd_pcm_start(substream);
-			if (err < 0)
-				goto _end_unlock;
-		} else if (!wait_capture_start(substream)) {
-			/* nothing to do */
-			err = 0;
+	    runtime->status->state == SNDRV_PCM_STATE_PREPARED &&
+	    size >= runtime->start_threshold) {
+		err = snd_pcm_start(substream);
+		if (err < 0)
 			goto _end_unlock;
-		}
 	}
 
 	avail = snd_pcm_avail(substream);
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 59/167 drm/vblank: Allow dynamic per-crtc max_vblank_count

In reply to Sasha Levin

From: Ville Syrjälä <[email protected]>

[ Upstream commit ed20151a7699bb2c77eba3610199789a126940c4 ]

On i965gm we need to adjust max_vblank_count dynamically depending on whether the TV encoder is used or not. To that end add a per-crtc max_vblank_count that takes precedence over its device wide counterpart. The driver can now call drm_crtc_set_max_vblank_count() to configure the per-crtc value before calling drm_vblank_on().

Also looks like there was some discussion about exynos needing similar treatment.

v2: Drop the extra max_vblank_count!=0 check for the

    WARN(last!=current), will take care of it in i915 code (Daniel)
    WARN_ON(!inmodeset) (Daniel)
    WARN_ON(dev->max_vblank_count)
    Pimp up the docs (Daniel)
---
 drivers/gpu/drm/drm_vblank.c | 45 +++++++++++++++++++++++++++++++++---
 include/drm/drm_device.h     |  8 ++++++-
 include/drm/drm_vblank.h     | 22 ++++++++++++++++++
 3 files changed, 71 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_vblank.c +42 -3
index 28cdcf76b6f99..d1859bcc7ccbc 100644
@@ -105,13 +105,20 @@ static void store_vblank(struct drm_device *dev, unsigned int pipe,
 	write_sequnlock(&vblank->seqlock);
 }
 
+static u32 drm_max_vblank_count(struct drm_device *dev, unsigned int pipe)
+{
+	struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
+
+	return vblank->max_vblank_count ?: dev->max_vblank_count;
+}
+
 /*
  * "No hw counter" fallback implementation of .get_vblank_counter() hook,
  * if there is no useable hardware frame counter available.
  */
 static u32 drm_vblank_no_hw_counter(struct drm_device *dev, unsigned int pipe)
 {
-	WARN_ON_ONCE(dev->max_vblank_count != 0);
+	WARN_ON_ONCE(drm_max_vblank_count(dev, pipe) != 0);
 	return 0;
 }
 
@@ -198,6 +205,7 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
 	ktime_t t_vblank;
 	int count = DRM_TIMESTAMP_MAXRETRIES;
 	int framedur_ns = vblank->framedur_ns;
+	u32 max_vblank_count = drm_max_vblank_count(dev, pipe);
 
 	/*
 	 * Interrupts were disabled prior to this call, so deal with counter
@@ -216,9 +224,9 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
 		rc = drm_get_last_vbltimestamp(dev, pipe, &t_vblank, in_vblank_irq);
 	} while (cur_vblank != __get_vblank_counter(dev, pipe) && --count > 0);
 
-	if (dev->max_vblank_count != 0) {
+	if (max_vblank_count) {
 		/* trust the hw counter when it's around */
-		diff = (cur_vblank - vblank->last) & dev->max_vblank_count;
+		diff = (cur_vblank - vblank->last) & max_vblank_count;
 	} else if (rc && framedur_ns) {
 		u64 diff_ns = ktime_to_ns(ktime_sub(t_vblank, vblank->time));
 
@@ -1204,6 +1212,37 @@ void drm_crtc_vblank_reset(struct drm_crtc *crtc)
 }
 EXPORT_SYMBOL(drm_crtc_vblank_reset);
 
+/**
+ * drm_crtc_set_max_vblank_count - configure the hw max vblank counter value
+ * @crtc: CRTC in question
+ * @max_vblank_count: max hardware vblank counter value
+ *
+ * Update the maximum hardware vblank counter value for @crtc
+ * at runtime. Useful for hardware where the operation of the
+ * hardware vblank counter depends on the currently active
+ * display configuration.
+ *
+ * For example, if the hardware vblank counter does not work
+ * when a specific connector is active the maximum can be set
+ * to zero. And when that specific connector isn't active the
+ * maximum can again be set to the appropriate non-zero value.
+ *
+ * If used, must be called before drm_vblank_on().
+ */
+void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc,
+				   u32 max_vblank_count)
+{
+	struct drm_device *dev = crtc->dev;
+	unsigned int pipe = drm_crtc_index(crtc);
+	struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
+
+	WARN_ON(dev->max_vblank_count);
+	WARN_ON(!READ_ONCE(vblank->inmodeset));
+
+	vblank->max_vblank_count = max_vblank_count;
+}
+EXPORT_SYMBOL(drm_crtc_set_max_vblank_count);
+
 /**
  * drm_crtc_vblank_on - enable vblank events on a CRTC
  * @crtc: CRTC in question
include/drm/drm_device.h +7 -1
index f9c6e0e3aec7d..fa117e11458ae 100644
@@ -174,7 +174,13 @@ struct drm_device {
 	 * races and imprecision over longer time periods, hence exposing a
 	 * hardware vblank counter is always recommended.
 	 *
-	 * If non-zeor, &drm_crtc_funcs.get_vblank_counter must be set.
+	 * This is the statically configured device wide maximum. The driver
+	 * can instead choose to use a runtime configurable per-crtc value
+	 * &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count
+	 * must be left at zero. See drm_crtc_set_max_vblank_count() on how
+	 * to use the per-crtc value.
+	 *
+	 * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
 	 */
 	u32 max_vblank_count;           /**< size of vblank counter register */
 
include/drm/drm_vblank.h +22 -0
index d25a9603ab570..e9c676381fd4f 100644
@@ -128,6 +128,26 @@ struct drm_vblank_crtc {
 	 * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
 	 */
 	u32 last;
+	/**
+	 * @max_vblank_count:
+	 *
+	 * Maximum value of the vblank registers for this crtc. This value +1
+	 * will result in a wrap-around of the vblank register. It is used
+	 * by the vblank core to handle wrap-arounds.
+	 *
+	 * If set to zero the vblank core will try to guess the elapsed vblanks
+	 * between times when the vblank interrupt is disabled through
+	 * high-precision timestamps. That approach is suffering from small
+	 * races and imprecision over longer time periods, hence exposing a
+	 * hardware vblank counter is always recommended.
+	 *
+	 * This is the runtime configurable per-crtc maximum set through
+	 * drm_crtc_set_max_vblank_count(). If this is used the driver
+	 * must leave the device wide &drm_device.max_vblank_count at zero.
+	 *
+	 * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
+	 */
+	u32 max_vblank_count;
 	/**
 	 * @inmodeset: Tracks whether the vblank is disabled due to a modeset.
 	 * For legacy driver bit 2 additionally tracks whether an additional
@@ -206,4 +226,6 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
 void drm_calc_timestamping_constants(struct drm_crtc *crtc,
 				     const struct drm_display_mode *mode);
 wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc);
+void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc,
+				   u32 max_vblank_count);
 #endif
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#71 lore raw

PATCH 62/167 tpm: Fix some name collisions with drivers/char/tpm.h

In reply to Sasha Levin

From: Jarkko Sakkinen <[email protected]>

[ Upstream commit 8ab547a2dcfac6ec184a5e036e1093eb3f7a215c ]

* Rename TPM_BUFSIZE defined in drivers/char/tpm/st33zp24/st33zp24.h to ST33ZP24_BUFSIZE.
* Rename TPM_BUFSIZE defined in drivers/char/tpm/tpm_i2c_infineon.c to TPM_I2C_INFINEON_BUFSIZE.
* Rename TPM_RETRY in tpm_i2c_nuvoton to TPM_I2C_RETRIES.
* Remove TPM_HEADER_SIZE from tpm_i2c_nuvoton.

Fixes bf38b8710892 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Fixes aad628c1d91a ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Fixes 32d33b29ba07 ("TPM: Retry SaveState command in suspend path")
---
 drivers/char/tpm/st33zp24/i2c.c      |  2 +-
 drivers/char/tpm/st33zp24/spi.c      |  2 +-
 drivers/char/tpm/st33zp24/st33zp24.h |  4 ++--
 drivers/char/tpm/tpm_i2c_infineon.c  | 15 ++++++++-------
 drivers/char/tpm/tpm_i2c_nuvoton.c   | 16 +++++++---------
 5 files changed, 19 insertions(+), 20 deletions(-)
drivers/char/tpm/st33zp24/i2c.c +1 -1
index be5d1abd3e8ef..8390c5b54c3be 100644
@@ -33,7 +33,7 @@
 
 struct st33zp24_i2c_phy {
 	struct i2c_client *client;
-	u8 buf[TPM_BUFSIZE + 1];
+	u8 buf[ST33ZP24_BUFSIZE + 1];
 	int io_lpcpd;
 };
 
drivers/char/tpm/st33zp24/spi.c +1 -1
index d7909ab287a85..ff019a1e3c68f 100644
@@ -63,7 +63,7 @@
  * some latency byte before the answer is available (max 15).
  * We have 2048 + 1024 + 15.
  */
-#define ST33ZP24_SPI_BUFFER_SIZE (TPM_BUFSIZE + (TPM_BUFSIZE / 2) +\
+#define ST33ZP24_SPI_BUFFER_SIZE (ST33ZP24_BUFSIZE + (ST33ZP24_BUFSIZE / 2) +\
 				  MAX_SPI_LATENCY)
 
 
drivers/char/tpm/st33zp24/st33zp24.h +2 -2
index 6f4a4198af6aa..20da0a84988d6 100644
@@ -18,8 +18,8 @@
 #ifndef __LOCAL_ST33ZP24_H__
 #define __LOCAL_ST33ZP24_H__
 
-#define TPM_WRITE_DIRECTION             0x80
-#define TPM_BUFSIZE                     2048
+#define TPM_WRITE_DIRECTION	0x80
+#define ST33ZP24_BUFSIZE	2048
 
 struct st33zp24_dev {
 	struct tpm_chip *chip;
drivers/char/tpm/tpm_i2c_infineon.c +8 -7
index 977fd42daa1b1..3b4e9672ff6cd 100644
@@ -26,8 +26,7 @@
 #include <linux/wait.h>
 #include "tpm.h"
 
-/* max. buffer size supported by our TPM */
-#define TPM_BUFSIZE 1260
+#define TPM_I2C_INFINEON_BUFSIZE 1260
 
 /* max. number of iterations after I2C NAK */
 #define MAX_COUNT 3
@@ -63,11 +62,13 @@ enum i2c_chip_type {
 	UNKNOWN,
 };
 
-/* Structure to store I2C TPM specific stuff */
 struct tpm_inf_dev {
 	struct i2c_client *client;
 	int locality;
-	u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */
+	/* In addition to the data itself, the buffer must fit the 7-bit I2C
+	 * address and the direction bit.
+	 */
+	u8 buf[TPM_I2C_INFINEON_BUFSIZE + 1];
 	struct tpm_chip *chip;
 	enum i2c_chip_type chip_type;
 	unsigned int adapterlimit;
@@ -219,7 +220,7 @@ static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
 		.buf = tpm_dev.buf
 	};
 
-	if (len > TPM_BUFSIZE)
+	if (len > TPM_I2C_INFINEON_BUFSIZE)
 		return -EINVAL;
 
 	if (!tpm_dev.client->adapter->algo->master_xfer)
@@ -527,8 +528,8 @@ static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	u8 retries = 0;
 	u8 sts = TPM_STS_GO;
 
-	if (len > TPM_BUFSIZE)
-		return -E2BIG;	/* command is too long for our tpm, sorry */
+	if (len > TPM_I2C_INFINEON_BUFSIZE)
+		return -E2BIG;
 
 	if (request_locality(chip, 0) < 0)
 		return -EBUSY;
drivers/char/tpm/tpm_i2c_nuvoton.c +7 -9
index b8defdfdf2dc6..2803080097841 100644
@@ -35,14 +35,12 @@
 #include "tpm.h"
 
 /* I2C interface offsets */
-#define TPM_STS                0x00
-#define TPM_BURST_COUNT        0x01
-#define TPM_DATA_FIFO_W        0x20
-#define TPM_DATA_FIFO_R        0x40
-#define TPM_VID_DID_RID        0x60
-/* TPM command header size */
-#define TPM_HEADER_SIZE        10
-#define TPM_RETRY      5
+#define TPM_STS			0x00
+#define TPM_BURST_COUNT		0x01
+#define TPM_DATA_FIFO_W		0x20
+#define TPM_DATA_FIFO_R		0x40
+#define TPM_VID_DID_RID		0x60
+#define TPM_I2C_RETRIES		5
 /*
  * I2C bus device maximum buffer size w/o counting I2C address or command
  * i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
@@ -292,7 +290,7 @@ static int i2c_nuvoton_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		dev_err(dev, "%s() count < header size\n", __func__);
 		return -EIO;
 	}
-	for (retries = 0; retries < TPM_RETRY; retries++) {
+	for (retries = 0; retries < TPM_I2C_RETRIES; retries++) {
 		if (retries > 0) {
 			/* if this is not the first trial, set responseRetry */
 			i2c_nuvoton_write_status(client,
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 65/167 KVM: VMX: Compare only a single byte for VMCS' "launched" in vCPU-run

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit 61c08aa9606d4e48a8a50639c956448a720174c3 ]

The vCPU-run asm blob does a manual comparison of a VMCS' launched status to execute the correct VM-Enter instruction, i.e. VMLAUNCH vs. VMRESUME. The launched flag is a bool, which is a typedef of _Bool. C99 does not define an exact size for _Bool, stating only that is must be large enough to hold '0' and '1'. Most, if not all, compilers use a single byte for _Bool, including gcc[1].

Originally, 'launched' was of type 'int' and so the asm blob used 'cmpl' to check the launch status. When 'launched' was moved to be stored on a per-VMCS basis, struct vcpu_vmx's "temporary" __launched flag was added in order to avoid having to pass the current VMCS into the asm blob. The new '__launched' was defined as a 'bool' and not an 'int', but the 'cmp' instruction was not updated.

This has not caused any known problems, likely due to compilers aligning variables to 4-byte or 8-byte boundaries and KVM zeroing out struct vcpu_vmx during allocation. I.e. vCPU-run accesses "junk" data, it just happens to always be zero and so doesn't affect the result.

[1] https://gcc.gnu.org/ml/gcc-patches/2000-10/msg01127.html

Fixes d462b8192368 ("KVM: VMX: Keep list of loaded VMCSs, instead of vcpus")
---
 arch/x86/kvm/vmx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/vmx.c +1 -1
index 2e310ea62d609..562f5dc4645b6 100644
@@ -10808,7 +10808,7 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		"mov %%" _ASM_AX", %%cr2 \n\t"
 		"3: \n\t"
 		/* Check if vmlaunch of vmresume is needed */
-		"cmpl $0, %c[launched](%0) \n\t"
+		"cmpb $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
 		"mov %c[rax](%0), %%" _ASM_AX " \n\t"
 		"mov %c[rbx](%0), %%" _ASM_BX " \n\t"
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 66/167 iio: adc: exynos-adc: Add S5PV210 variant

In reply to Sasha Levin

From: Jonathan Bakker <[email protected]>

[ Upstream commit 882bf52fdeab47dbe991cc0e564b0b51c571d0a3 ]

S5PV210's ADC variant is almost the same as v1 except that it has 10 channels and doesn't require the pmu register

---
 drivers/iio/adc/exynos_adc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/iio/adc/exynos_adc.c +14 -0
index 4be29ed447559..41da522fc6735 100644
@@ -115,6 +115,7 @@
 #define MAX_ADC_V2_CHANNELS		10
 #define MAX_ADC_V1_CHANNELS		8
 #define MAX_EXYNOS3250_ADC_CHANNELS	2
+#define MAX_S5PV210_ADC_CHANNELS	10
 
 /* Bit definitions common for ADC_V1 and ADC_V2 */
 #define ADC_CON_EN_START	(1u << 0)
@@ -282,6 +283,16 @@ static const struct exynos_adc_data exynos_adc_v1_data = {
 	.start_conv	= exynos_adc_v1_start_conv,
 };
 
+static const struct exynos_adc_data exynos_adc_s5pv210_data = {
+	.num_channels	= MAX_S5PV210_ADC_CHANNELS,
+	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_v1_start_conv,
+};
+
 static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
 					  unsigned long addr)
 {
@@ -478,6 +489,9 @@ static const struct of_device_id exynos_adc_match[] = {
 	}, {
 		.compatible = "samsung,s3c6410-adc",
 		.data = &exynos_adc_s3c64xx_data,
+	}, {
+		.compatible = "samsung,s5pv210-adc",
+		.data = &exynos_adc_s5pv210_data,
 	}, {
 		.compatible = "samsung,exynos-adc-v1",
 		.data = &exynos_adc_v1_data,
Signature · 1 line
2.20.1
author maintainer
#81 lore raw

PATCH 69/167 mt76: fix corrupted software generated tx CCMP PN

In reply to Sasha Levin

From: Felix Fietkau <[email protected]>

[ Upstream commit 906d2d3f874a54183df5a609fda180adf0462428 ]

Since ccmp_pn is u8 *, the second half needs to start at array index 4 instead of 0. Fixes a connection stall after a certain amount of traffic

Fixes 23405236460b9 ("mt76: fix transmission of encrypted management frames")
---
 drivers/net/wireless/mediatek/mt76/mt76x2_mac_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt76x2_mac_common.c +1 -1
index 6542644bc3259..cec31f0c3017b 100644
@@ -402,7 +402,7 @@ void mt76x2_mac_write_txwi(struct mt76x2_dev *dev, struct mt76x2_txwi *txwi,
 		ccmp_pn[6] = pn >> 32;
 		ccmp_pn[7] = pn >> 40;
 		txwi->iv = *((__le32 *)&ccmp_pn[0]);
-		txwi->eiv = *((__le32 *)&ccmp_pn[1]);
+		txwi->eiv = *((__le32 *)&ccmp_pn[4]);
 	}
 
 	spin_lock_bh(&dev->mt76.lock);
Signature · 1 line
2.20.1
author maintainer
#83 lore raw

PATCH 71/167 iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modules

In reply to Sasha Levin

From: Luca Coelho <[email protected]>

[ Upstream commit ab27926d9e4ae23df4f4d98e31f067c8b486bb4f ]

The devices with PCI device ID 0x34F0 are part of the SoC and can be combined with some different external RF modules. The configuration for these devices should reflect that, but are currently mixed up. To avoid confusion with discrete devices, add part of the firmware to be used and the official name of the device to the cfg structs.

This is least reorganization possible (without messing things even more) that could be done as a bugfix for this SoC. Further reorganization of this code will be done separately.

---
 .../net/wireless/intel/iwlwifi/cfg/22000.c    | 65 ++++++++++++++++++-
 .../net/wireless/intel/iwlwifi/iwl-config.h   |  9 ++-
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 55 ++++++++--------
 3 files changed, 97 insertions(+), 32 deletions(-)
drivers/net/wireless/intel/iwlwifi/cfg/22000.c +62 -3
index 91ca77c7571ce..b4347806a59ed 100644
@@ -77,10 +77,13 @@
 #define IWL_22000_HR_FW_PRE		"iwlwifi-Qu-a0-hr-a0-"
 #define IWL_22000_HR_CDB_FW_PRE		"iwlwifi-QuIcp-z0-hrcdb-a0-"
 #define IWL_22000_HR_A_F0_FW_PRE	"iwlwifi-QuQnj-f0-hr-a0-"
-#define IWL_22000_HR_B_FW_PRE		"iwlwifi-Qu-b0-hr-b0-"
+#define IWL_22000_HR_B_F0_FW_PRE	"iwlwifi-Qu-b0-hr-b0-"
+#define IWL_22000_QU_B_HR_B_FW_PRE	"iwlwifi-Qu-b0-hr-b0-"
+#define IWL_22000_HR_B_FW_PRE		"iwlwifi-QuQnj-b0-hr-b0-"
 #define IWL_22000_JF_B0_FW_PRE		"iwlwifi-QuQnj-a0-jf-b0-"
 #define IWL_22000_HR_A0_FW_PRE		"iwlwifi-QuQnj-a0-hr-a0-"
 #define IWL_22000_SU_Z0_FW_PRE		"iwlwifi-su-z0-"
+#define IWL_QU_B_JF_B_FW_PRE		"iwlwifi-Qu-b0-jf-b0-"
 
 #define IWL_22000_HR_MODULE_FIRMWARE(api) \
 	IWL_22000_HR_FW_PRE __stringify(api) ".ucode"
@@ -88,7 +91,11 @@
 	IWL_22000_JF_FW_PRE __stringify(api) ".ucode"
 #define IWL_22000_HR_A_F0_QNJ_MODULE_FIRMWARE(api) \
 	IWL_22000_HR_A_F0_FW_PRE __stringify(api) ".ucode"
-#define IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(api) \
+#define IWL_22000_HR_B_F0_QNJ_MODULE_FIRMWARE(api) \
+	IWL_22000_HR_B_F0_FW_PRE __stringify(api) ".ucode"
+#define IWL_22000_QU_B_HR_B_MODULE_FIRMWARE(api) \
+	IWL_22000_QU_B_HR_B_FW_PRE __stringify(api) ".ucode"
+#define IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(api)	\
 	IWL_22000_HR_B_FW_PRE __stringify(api) ".ucode"
 #define IWL_22000_JF_B0_QNJ_MODULE_FIRMWARE(api) \
 	IWL_22000_JF_B0_FW_PRE __stringify(api) ".ucode"
@@ -96,6 +103,8 @@
 	IWL_22000_HR_A0_FW_PRE __stringify(api) ".ucode"
 #define IWL_22000_SU_Z0_MODULE_FIRMWARE(api) \
 	IWL_22000_SU_Z0_FW_PRE __stringify(api) ".ucode"
+#define IWL_QU_B_JF_B_MODULE_FIRMWARE(api) \
+	IWL_QU_B_JF_B_FW_PRE __stringify(api) ".ucode"
 
 #define NVM_HW_SECTION_NUM_FAMILY_22000		10
 
@@ -190,7 +199,54 @@ const struct iwl_cfg iwl22000_2ac_cfg_jf = {
 
 const struct iwl_cfg iwl22000_2ax_cfg_hr = {
 	.name = "Intel(R) Dual Band Wireless AX 22000",
-	.fw_name_pre = IWL_22000_HR_FW_PRE,
+	.fw_name_pre = IWL_22000_QU_B_HR_B_FW_PRE,
+	IWL_DEVICE_22500,
+	/*
+	 * This device doesn't support receiving BlockAck with a large bitmap
+	 * so we need to restrict the size of transmitted aggregation to the
+	 * HT size; mac80211 would otherwise pick the HE max (256) by default.
+	 */
+	.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
+};
+
+/*
+ * All JF radio modules are part of the 9000 series, but the MAC part
+ * looks more like 22000.  That's why this device is here, but called
+ * 9560 nevertheless.
+ */
+const struct iwl_cfg iwl9461_2ac_cfg_qu_b0_jf_b0 = {
+	.name = "Intel(R) Wireless-AC 9461",
+	.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
+	IWL_DEVICE_22500,
+};
+
+const struct iwl_cfg iwl9462_2ac_cfg_qu_b0_jf_b0 = {
+	.name = "Intel(R) Wireless-AC 9462",
+	.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
+	IWL_DEVICE_22500,
+};
+
+const struct iwl_cfg iwl9560_2ac_cfg_qu_b0_jf_b0 = {
+	.name = "Intel(R) Wireless-AC 9560",
+	.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
+	IWL_DEVICE_22500,
+};
+
+const struct iwl_cfg killer1550i_2ac_cfg_qu_b0_jf_b0 = {
+	.name = "Killer (R) Wireless-AC 1550i Wireless Network Adapter (9560NGW)",
+	.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
+	IWL_DEVICE_22500,
+};
+
+const struct iwl_cfg killer1550s_2ac_cfg_qu_b0_jf_b0 = {
+	.name = "Killer (R) Wireless-AC 1550s Wireless Network Adapter (9560NGW)",
+	.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
+	IWL_DEVICE_22500,
+};
+
+const struct iwl_cfg iwl22000_2ax_cfg_jf = {
+	.name = "Intel(R) Dual Band Wireless AX 22000",
+	.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
 	IWL_DEVICE_22500,
 	/*
 	 * This device doesn't support receiving BlockAck with a large bitmap
@@ -264,7 +320,10 @@ const struct iwl_cfg iwl22560_2ax_cfg_su_cdb = {
 MODULE_FIRMWARE(IWL_22000_HR_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL_22000_JF_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL_22000_HR_A_F0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL_22000_HR_B_F0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL_22000_QU_B_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL_22000_JF_B0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL_22000_HR_A0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL_22000_SU_Z0_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL_QU_B_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
drivers/net/wireless/intel/iwlwifi/iwl-config.h +8 -1
index 12fddcf15bab3..2e9fd7a303985 100644
@@ -574,11 +574,18 @@ extern const struct iwl_cfg iwl22000_2ac_cfg_hr;
 extern const struct iwl_cfg iwl22000_2ac_cfg_hr_cdb;
 extern const struct iwl_cfg iwl22000_2ac_cfg_jf;
 extern const struct iwl_cfg iwl22000_2ax_cfg_hr;
+extern const struct iwl_cfg iwl9461_2ac_cfg_qu_b0_jf_b0;
+extern const struct iwl_cfg iwl9462_2ac_cfg_qu_b0_jf_b0;
+extern const struct iwl_cfg iwl9560_2ac_cfg_qu_b0_jf_b0;
+extern const struct iwl_cfg killer1550i_2ac_cfg_qu_b0_jf_b0;
+extern const struct iwl_cfg killer1550s_2ac_cfg_qu_b0_jf_b0;
+extern const struct iwl_cfg iwl22000_2ax_cfg_jf;
 extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0_f0;
+extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_b0_f0;
 extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_b0;
 extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_jf_b0;
 extern const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0;
 extern const struct iwl_cfg iwl22560_2ax_cfg_su_cdb;
-#endif /* CONFIG_IWLMVM */
+#endif /* CPTCFG_IWLMVM || CPTCFG_IWLFMAC */
 
 #endif /* __IWL_CONFIG_H__ */
drivers/net/wireless/intel/iwlwifi/pcie/drv.c +27 -28

61 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 72/167 iwlwifi: add new card for 9260 series

In reply to Sasha Levin

From: Ihab Zhaika <[email protected]>

[ Upstream commit 3941310cf665b8a7965424d2a185c80782faa030 ]

Add one PCI ID for 9260 series.

---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/intel/iwlwifi/pcie/drv.c +1 -0
index d3a1c13bcf6f1..0982bd99b1c3c 100644
@@ -601,6 +601,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 	{IWL_PCI_DEVICE(0x2526, 0x2030, iwl9560_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x2526, 0x2034, iwl9560_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x2526, 0x4010, iwl9260_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x2526, 0x4018, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x4030, iwl9560_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x4034, iwl9560_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x2526, 0x40A4, iwl9460_2ac_cfg)},
Signature · 1 line
2.20.1
author maintainer
#90 lore raw

PATCH 78/167 btrfs: scrub: move scrub_setup_ctx allocation out of device_list_mutex

In reply to Sasha Levin

From: David Sterba <[email protected]>

[ Upstream commit 0e94c4f45d14cf89d1f40c91b0a8517e791672a7 ]

The scrub context is allocated with GFP_KERNEL and called from btrfs_scrub_dev under the fs_info::device_list_mutex. This is not safe regarding reclaim that could try to flush filesystem data in order to get the memory. And the device_list_mutex is held during superblock commit, so this would cause a lockup.

Move the alocation and initialization before any changes that require the mutex.

---
 fs/btrfs/scrub.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)
fs/btrfs/scrub.c +18 -12
index efaad3e1b295a..56c4d2236484f 100644
@@ -3837,13 +3837,18 @@ int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
 		return -EINVAL;
 	}
 
+	/* Allocate outside of device_list_mutex */
+	sctx = scrub_setup_ctx(fs_info, is_dev_replace);
+	if (IS_ERR(sctx))
+		return PTR_ERR(sctx);
 
 	mutex_lock(&fs_info->fs_devices->device_list_mutex);
 	dev = btrfs_find_device(fs_info, devid, NULL, NULL);
 	if (!dev || (test_bit(BTRFS_DEV_STATE_MISSING, &dev->dev_state) &&
 		     !is_dev_replace)) {
 		mutex_unlock(&fs_info->fs_devices->device_list_mutex);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_free_ctx;
 	}
 
 	if (!is_dev_replace && !readonly &&
@@ -3851,7 +3856,8 @@ int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
 		mutex_unlock(&fs_info->fs_devices->device_list_mutex);
 		btrfs_err_in_rcu(fs_info, "scrub: device %s is not writable",
 				rcu_str_deref(dev->name));
-		return -EROFS;
+		ret = -EROFS;
+		goto out_free_ctx;
 	}
 
 	mutex_lock(&fs_info->scrub_lock);
@@ -3859,7 +3865,8 @@ int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
 	    test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &dev->dev_state)) {
 		mutex_unlock(&fs_info->scrub_lock);
 		mutex_unlock(&fs_info->fs_devices->device_list_mutex);
-		return -EIO;
+		ret = -EIO;
+		goto out_free_ctx;
 	}
 
 	btrfs_dev_replace_read_lock(&fs_info->dev_replace);
@@ -3869,7 +3876,8 @@ int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
 		btrfs_dev_replace_read_unlock(&fs_info->dev_replace);
 		mutex_unlock(&fs_info->scrub_lock);
 		mutex_unlock(&fs_info->fs_devices->device_list_mutex);
-		return -EINPROGRESS;
+		ret = -EINPROGRESS;
+		goto out_free_ctx;
 	}
 	btrfs_dev_replace_read_unlock(&fs_info->dev_replace);
 
@@ -3877,16 +3885,9 @@ int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
 	if (ret) {
 		mutex_unlock(&fs_info->scrub_lock);
 		mutex_unlock(&fs_info->fs_devices->device_list_mutex);
-		return ret;
+		goto out_free_ctx;
 	}
 
-	sctx = scrub_setup_ctx(fs_info, is_dev_replace);
-	if (IS_ERR(sctx)) {
-		mutex_unlock(&fs_info->scrub_lock);
-		mutex_unlock(&fs_info->fs_devices->device_list_mutex);
-		scrub_workers_put(fs_info);
-		return PTR_ERR(sctx);
-	}
 	sctx->readonly = readonly;
 	dev->scrub_ctx = sctx;
 	mutex_unlock(&fs_info->fs_devices->device_list_mutex);
@@ -3939,6 +3940,11 @@ int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
 
 	scrub_put_ctx(sctx);
 
+	return ret;
+
+out_free_ctx:
+	scrub_free_ctx(sctx);
+
 	return ret;
 }
 
Signature · 1 line
2.20.1
author maintainer
#95 lore raw

PATCH 83/167 drm: add __user attribute to ptr_to_compat()

In reply to Sasha Levin

From: Ben Dooks <[email protected]>

[ Upstream commit e552f0851070fe4975d610a99910be4e9bf5d7bd ]

The ptr_to_compat() call takes a "void __user *", so cast the compat drm calls that use it to avoid the following warnings from sparse:

drivers/gpu/drm/drm_ioc32.c:188:39: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/drm_ioc32.c:188:39: expected void [noderef] <asn:1>*uptr
drivers/gpu/drm/drm_ioc32.c:188:39: got void *[addressable] [assigned] handle
drivers/gpu/drm/drm_ioc32.c:529:41: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/drm_ioc32.c:529:41: expected void [noderef] <asn:1>*uptr
drivers/gpu/drm/drm_ioc32.c:529:41: got void *[addressable] [assigned] handle

---
 drivers/gpu/drm/drm_ioc32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_ioc32.c +3 -3
index 138680b37c709..f8672238d444b 100644
@@ -185,7 +185,7 @@ static int compat_drm_getmap(struct file *file, unsigned int cmd,
 	m32.size = map.size;
 	m32.type = map.type;
 	m32.flags = map.flags;
-	m32.handle = ptr_to_compat(map.handle);
+	m32.handle = ptr_to_compat((void __user *)map.handle);
 	m32.mtrr = map.mtrr;
 	if (copy_to_user(argp, &m32, sizeof(m32)))
 		return -EFAULT;
@@ -216,7 +216,7 @@ static int compat_drm_addmap(struct file *file, unsigned int cmd,
 
 	m32.offset = map.offset;
 	m32.mtrr = map.mtrr;
-	m32.handle = ptr_to_compat(map.handle);
+	m32.handle = ptr_to_compat((void __user *)map.handle);
 	if (map.handle != compat_ptr(m32.handle))
 		pr_err_ratelimited("compat_drm_addmap truncated handle %p for type %d offset %x\n",
 				   map.handle, m32.type, m32.offset);
@@ -529,7 +529,7 @@ static int compat_drm_getsareactx(struct file *file, unsigned int cmd,
 	if (err)
 		return err;
 
-	req32.handle = ptr_to_compat(req.handle);
+	req32.handle = ptr_to_compat((void __user *)req.handle);
 	if (copy_to_user(argp, &req32, sizeof(req32)))
 		return -EFAULT;
 
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#97 lore raw

PATCH 85/167 CIFS: Fix leaking locked VFS cache pages in writeback retry

In reply to Sasha Levin

From: Pavel Shilovsky <[email protected]>

[ Upstream commit 165df9a080b6863ae286fa01780c13d87cd81076 ]

If we don't find a writable file handle when retrying writepages we break of the loop and do not unlock and put pages neither from wdata2 nor from the original wdata. Fix this by walking through all the remaining pages and cleanup them properly.

---
 fs/cifs/cifssmb.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
fs/cifs/cifssmb.c +13 -4
index a5cb7b2d1ac5d..86a54b809c484 100644
@@ -2033,12 +2033,13 @@ cifs_writev_requeue(struct cifs_writedata *wdata)
 
 		wdata2->cfile = find_writable_file(CIFS_I(inode), false);
 		if (!wdata2->cfile) {
-			cifs_dbg(VFS, "No writable handles for inode\n");
+			cifs_dbg(VFS, "No writable handle to retry writepages\n");
 			rc = -EBADF;
-			break;
+		} else {
+			wdata2->pid = wdata2->cfile->pid;
+			rc = server->ops->async_writev(wdata2,
+						       cifs_writedata_release);
 		}
-		wdata2->pid = wdata2->cfile->pid;
-		rc = server->ops->async_writev(wdata2, cifs_writedata_release);
 
 		for (j = 0; j < nr_pages; j++) {
 			unlock_page(wdata2->pages[j]);
@@ -2053,6 +2054,7 @@ cifs_writev_requeue(struct cifs_writedata *wdata)
 			kref_put(&wdata2->refcount, cifs_writedata_release);
 			if (is_retryable_error(rc))
 				continue;
+			i += nr_pages;
 			break;
 		}
 
@@ -2060,6 +2062,13 @@ cifs_writev_requeue(struct cifs_writedata *wdata)
 		i += nr_pages;
 	} while (i < wdata->nr_pages);
 
+	/* cleanup remaining pages from the original wdata */
+	for (; i < wdata->nr_pages; i++) {
+		SetPageError(wdata->pages[i]);
+		end_page_writeback(wdata->pages[i]);
+		put_page(wdata->pages[i]);
+	}
+
 	if (rc != 0 && !is_retryable_error(rc))
 		mapping_set_error(inode->i_mapping, rc);
 	kref_put(&wdata->refcount, cifs_writedata_release);
Signature · 1 line
2.20.1
author maintainer
#101 lore raw

PATCH 89/167 usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 976daf9d1199932df80e7b04546d1a1bd4ed5ece ]

PD 2.0 sinks are supposed to accept src-capabilities with a 3.0 header and simply ignore any src PDOs which the sink does not understand such as PPS but some 2.0 sinks instead ignore the entire PD_DATA_SOURCE_CAP message, causing contract negotiation to fail.

This commit fixes such sinks not working by re-trying the contract negotiation with PD-2.0 source-caps messages if we don't have a contract after PD_N_HARD_RESET_COUNT hard-reset attempts.

The problem fixed by this commit was noticed with a Type-C to VGA dongle.

---
 drivers/usb/typec/tcpm.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm.c +26 -1
index 5f29ce8d6c3f9..e8524ad5a4c0a 100644
@@ -37,6 +37,7 @@
 	S(SRC_ATTACHED),			\
 	S(SRC_STARTUP),				\
 	S(SRC_SEND_CAPABILITIES),		\
+	S(SRC_SEND_CAPABILITIES_TIMEOUT),	\
 	S(SRC_NEGOTIATE_CAPABILITIES),		\
 	S(SRC_TRANSITION_SUPPLY),		\
 	S(SRC_READY),				\
@@ -2987,10 +2988,34 @@ static void run_state_machine(struct tcpm_port *port)
 			/* port->hard_reset_count = 0; */
 			port->caps_count = 0;
 			port->pd_capable = true;
-			tcpm_set_state_cond(port, hard_reset_state(port),
+			tcpm_set_state_cond(port, SRC_SEND_CAPABILITIES_TIMEOUT,
 					    PD_T_SEND_SOURCE_CAP);
 		}
 		break;
+	case SRC_SEND_CAPABILITIES_TIMEOUT:
+		/*
+		 * Error recovery for a PD_DATA_SOURCE_CAP reply timeout.
+		 *
+		 * PD 2.0 sinks are supposed to accept src-capabilities with a
+		 * 3.0 header and simply ignore any src PDOs which the sink does
+		 * not understand such as PPS but some 2.0 sinks instead ignore
+		 * the entire PD_DATA_SOURCE_CAP message, causing contract
+		 * negotiation to fail.
+		 *
+		 * After PD_N_HARD_RESET_COUNT hard-reset attempts, we try
+		 * sending src-capabilities with a lower PD revision to
+		 * make these broken sinks work.
+		 */
+		if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) {
+			tcpm_set_state(port, HARD_RESET_SEND, 0);
+		} else if (port->negotiated_rev > PD_REV20) {
+			port->negotiated_rev--;
+			port->hard_reset_count = 0;
+			tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
+		} else {
+			tcpm_set_state(port, hard_reset_state(port), 0);
+		}
+		break;
 	case SRC_NEGOTIATE_CAPABILITIES:
 		ret = tcpm_pd_check_request(port);
 		if (ret < 0) {
Signature · 1 line
2.20.1
author maintainer
#104 lore raw

PATCH 92/167 kvm: mmu: Fix overflow on kvm mmu page limit calculation

In reply to Sasha Levin

From: Ben Gardon <[email protected]>

[ Upstream commit bc8a3d8925a8fa09fa550e0da115d95851ce33c6 ]

KVM bases its memory usage limits on the total number of guest pages across all memslots. However, those limits, and the calculations to produce them, use 32 bit unsigned integers. This can result in overflow if a VM has more guest pages that can be represented by a u32. As a result of this overflow, KVM can use a low limit on the number of MMU pages it will allocate. This makes KVM unable to map all of guest memory at once, prompting spurious faults.

Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch
introduced no new failures.

---
 arch/x86/include/asm/kvm_host.h | 12 ++++++------
 arch/x86/kvm/mmu.c              | 13 ++++++-------
 arch/x86/kvm/mmu.h              |  2 +-
 arch/x86/kvm/x86.c              |  4 ++--
 4 files changed, 15 insertions(+), 16 deletions(-)
arch/x86/include/asm/kvm_host.h +6 -6
index b6417454a9d79..0d3f5cf3ff3ea 100644
@@ -117,7 +117,7 @@ static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level)
 }
 
 #define KVM_PERMILLE_MMU_PAGES 20
-#define KVM_MIN_ALLOC_MMU_PAGES 64
+#define KVM_MIN_ALLOC_MMU_PAGES 64UL
 #define KVM_MMU_HASH_SHIFT 12
 #define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
 #define KVM_MIN_FREE_MMU_PAGES 5
@@ -796,9 +796,9 @@ enum kvm_irqchip_mode {
 };
 
 struct kvm_arch {
-	unsigned int n_used_mmu_pages;
-	unsigned int n_requested_mmu_pages;
-	unsigned int n_max_mmu_pages;
+	unsigned long n_used_mmu_pages;
+	unsigned long n_requested_mmu_pages;
+	unsigned long n_max_mmu_pages;
 	unsigned int indirect_shadow_pages;
 	unsigned long mmu_valid_gen;
 	struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
@@ -1201,8 +1201,8 @@ void kvm_mmu_clear_dirty_pt_masked(struct kvm *kvm,
 				   gfn_t gfn_offset, unsigned long mask);
 void kvm_mmu_zap_all(struct kvm *kvm);
 void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen);
-unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm);
-void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages);
+unsigned long kvm_mmu_calculate_mmu_pages(struct kvm *kvm);
+void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned long kvm_nr_mmu_pages);
 
 int load_pdptrs(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, unsigned long cr3);
 bool pdptrs_changed(struct kvm_vcpu *vcpu);
arch/x86/kvm/mmu.c +6 -7
index cdc0c460950f3..88940261fb537 100644
@@ -1954,7 +1954,7 @@ static int is_empty_shadow_page(u64 *spt)
  * aggregate version in order to make the slab shrinker
  * faster
  */
-static inline void kvm_mod_used_mmu_pages(struct kvm *kvm, int nr)
+static inline void kvm_mod_used_mmu_pages(struct kvm *kvm, unsigned long nr)
 {
 	kvm->arch.n_used_mmu_pages += nr;
 	percpu_counter_add(&kvm_total_used_mmu_pages, nr);
@@ -2704,7 +2704,7 @@ static bool prepare_zap_oldest_mmu_page(struct kvm *kvm,
  * Changing the number of mmu pages allocated to the vm
  * Note: if goal_nr_mmu_pages is too small, you will get dead lock
  */
-void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int goal_nr_mmu_pages)
+void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned long goal_nr_mmu_pages)
 {
 	LIST_HEAD(invalid_list);
 
@@ -5926,10 +5926,10 @@ int kvm_mmu_module_init(void)
 /*
  * Caculate mmu pages needed for kvm.
  */
-unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm)
+unsigned long kvm_mmu_calculate_mmu_pages(struct kvm *kvm)
 {
-	unsigned int nr_mmu_pages;
-	unsigned int  nr_pages = 0;
+	unsigned long nr_mmu_pages;
+	unsigned long nr_pages = 0;
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *memslot;
 	int i;
@@ -5942,8 +5942,7 @@ unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm)
 	}
 
 	nr_mmu_pages = nr_pages * KVM_PERMILLE_MMU_PAGES / 1000;
-	nr_mmu_pages = max(nr_mmu_pages,
-			   (unsigned int) KVM_MIN_ALLOC_MMU_PAGES);
+	nr_mmu_pages = max(nr_mmu_pages, KVM_MIN_ALLOC_MMU_PAGES);
 
 	return nr_mmu_pages;
 }
arch/x86/kvm/mmu.h +1 -1
index 1fab69c0b2f32..65892288bf510 100644
@@ -69,7 +69,7 @@ bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu);
 int kvm_handle_page_fault(struct kvm_vcpu *vcpu, u64 error_code,
 				u64 fault_address, char *insn, int insn_len);
 
-static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm)
+static inline unsigned long kvm_mmu_available_pages(struct kvm *kvm)
 {
 	if (kvm->arch.n_max_mmu_pages > kvm->arch.n_used_mmu_pages)
 		return kvm->arch.n_max_mmu_pages -
arch/x86/kvm/x86.c +2 -2
index ed6b43f344b0c..4f564dc17c333 100644
@@ -4116,7 +4116,7 @@ static int kvm_vm_ioctl_set_identity_map_addr(struct kvm *kvm,
 }
 
 static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
-					  u32 kvm_nr_mmu_pages)
+					 unsigned long kvm_nr_mmu_pages)
 {
 	if (kvm_nr_mmu_pages < KVM_MIN_ALLOC_MMU_PAGES)
 		return -EINVAL;
@@ -4130,7 +4130,7 @@ static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
 	return 0;
 }
 
-static int kvm_vm_ioctl_get_nr_mmu_pages(struct kvm *kvm)
+static unsigned long kvm_vm_ioctl_get_nr_mmu_pages(struct kvm *kvm)
 {
 	return kvm->arch.n_max_mmu_pages;
 }
Signature · 1 line
2.20.1
author maintainer
#109 lore raw

PATCH 97/167 ext4: protect journal inode's blocks using block_validity

In reply to Sasha Levin

From: Theodore Ts'o <[email protected]>

[ Upstream commit 345c0dbf3a30872d9b204db96b5857cd00808cae ]

Add the blocks which belong to the journal inode to block_validity's system zone so attempts to deallocate or overwrite the journal due a corrupted file system where the journal blocks are also claimed by another inode.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202879

---
 fs/ext4/block_validity.c | 48 ++++++++++++++++++++++++++++++++++++++++
 fs/ext4/inode.c          |  4 ++++
 2 files changed, 52 insertions(+)
fs/ext4/block_validity.c +48 -0
index 913061c0de1b3..9409b1e11a22e 100644
@@ -137,6 +137,48 @@ static void debug_print_tree(struct ext4_sb_info *sbi)
 	printk(KERN_CONT "\n");
 }
 
+static int ext4_protect_reserved_inode(struct super_block *sb, u32 ino)
+{
+	struct inode *inode;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	struct ext4_map_blocks map;
+	u32 i = 0, err = 0, num, n;
+
+	if ((ino < EXT4_ROOT_INO) ||
+	    (ino > le32_to_cpu(sbi->s_es->s_inodes_count)))
+		return -EINVAL;
+	inode = ext4_iget(sb, ino, EXT4_IGET_SPECIAL);
+	if (IS_ERR(inode))
+		return PTR_ERR(inode);
+	num = (inode->i_size + sb->s_blocksize - 1) >> sb->s_blocksize_bits;
+	while (i < num) {
+		map.m_lblk = i;
+		map.m_len = num - i;
+		n = ext4_map_blocks(NULL, inode, &map, 0);
+		if (n < 0) {
+			err = n;
+			break;
+		}
+		if (n == 0) {
+			i++;
+		} else {
+			if (!ext4_data_block_valid(sbi, map.m_pblk, n)) {
+				ext4_error(sb, "blocks %llu-%llu from inode %u "
+					   "overlap system zone", map.m_pblk,
+					   map.m_pblk + map.m_len - 1, ino);
+				err = -EFSCORRUPTED;
+				break;
+			}
+			err = add_system_zone(sbi, map.m_pblk, n);
+			if (err < 0)
+				break;
+			i += n;
+		}
+	}
+	iput(inode);
+	return err;
+}
+
 int ext4_setup_system_zone(struct super_block *sb)
 {
 	ext4_group_t ngroups = ext4_get_groups_count(sb);
@@ -171,6 +213,12 @@ int ext4_setup_system_zone(struct super_block *sb)
 		if (ret)
 			return ret;
 	}
+	if (ext4_has_feature_journal(sb) && sbi->s_es->s_journal_inum) {
+		ret = ext4_protect_reserved_inode(sb,
+				le32_to_cpu(sbi->s_es->s_journal_inum));
+		if (ret)
+			return ret;
+	}
 
 	if (test_opt(sb, DEBUG))
 		debug_print_tree(sbi);
fs/ext4/inode.c +4 -0
index e65559bf77281..cff6277f7a9ff 100644
@@ -399,6 +399,10 @@ static int __check_block_validity(struct inode *inode, const char *func,
 				unsigned int line,
 				struct ext4_map_blocks *map)
 {
+	if (ext4_has_feature_journal(inode->i_sb) &&
+	    (inode->i_ino ==
+	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
+		return 0;
 	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), map->m_pblk,
 				   map->m_len)) {
 		ext4_error_inode(inode, func, line, map->m_pblk,
Signature · 1 line
2.20.1
author maintainer
#118 lore raw

PATCH 106/167 blk-mq: free hw queue's resource in hctx's release handler

In reply to Sasha Levin

From: Ming Lei <[email protected]>

[ Upstream commit c7e2d94b3d1634988a95ac4d77a72dc7487ece06 ]

Once blk_cleanup_queue() returns, tags shouldn't be used any more, because blk_mq_free_tag_set() may be called. Commit 45a9c9d909b2 ("blk-mq: Fix a use-after-free") fixes this issue exactly.

However, that commit introduces another issue. Before 45a9c9d909b2, we are allowed to run queue during cleaning up queue if the queue's kobj refcount is held. After that commit, queue can't be run during queue cleaning up, otherwise oops can be triggered easily because some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue().

We have invented ways for addressing this kind of issue before, such as:

8dc765d438f1 ("SCSI: fix queue cleanup race before queue initialization is done") c2856ae2f315 ("blk-mq: quiesce queue before freeing queue")

But still can't cover all cases, recently James reports another such kind of issue:

	https://marc.info/?l=linux-scsi&m=155389088124782&w=2

This issue can be quite hard to address by previous way, given scsi_run_queue() may run requeues for other LUNs.

Fixes the above issue by freeing hctx's resources in its release handler, and this way is safe becasue tags isn't needed for freeing such hctx resource.

This approach follows typical design pattern wrt. kobject's release handler.

Cc Dongli Zhang <[email protected]>
Cc James Smart <[email protected]>
Cc Bart Van Assche <[email protected]>
Cc Martin K . Petersen <[email protected]>,
Cc Christoph Hellwig <[email protected]>,
Cc James E . J . Bottomley <[email protected]>,
Fixes 45a9c9d909b2 ("blk-mq: Fix a use-after-free")
---
 block/blk-core.c     | 3 ++-
 block/blk-mq-sysfs.c | 6 ++++++
 block/blk-mq.c       | 8 ++------
 block/blk-mq.h       | 2 +-
 4 files changed, 11 insertions(+), 8 deletions(-)
block/blk-core.c +2 -1
index 4a3e1f4178804..af635f878f966 100644
@@ -816,7 +816,8 @@ void blk_cleanup_queue(struct request_queue *q)
 	blk_exit_queue(q);
 
 	if (q->mq_ops)
-		blk_mq_free_queue(q);
+		blk_mq_exit_queue(q);
+
 	percpu_ref_exit(&q->q_usage_counter);
 
 	spin_lock_irq(lock);
block/blk-mq-sysfs.c +6 -0
index aafb44224c896..0b7297a43ccd2 100644
@@ -10,6 +10,7 @@
 #include <linux/smp.h>
 
 #include <linux/blk-mq.h>
+#include "blk.h"
 #include "blk-mq.h"
 #include "blk-mq-tag.h"
 
@@ -21,6 +22,11 @@ static void blk_mq_hw_sysfs_release(struct kobject *kobj)
 {
 	struct blk_mq_hw_ctx *hctx = container_of(kobj, struct blk_mq_hw_ctx,
 						  kobj);
+
+	if (hctx->flags & BLK_MQ_F_BLOCKING)
+		cleanup_srcu_struct(hctx->srcu);
+	blk_free_flush_queue(hctx->fq);
+	sbitmap_free(&hctx->ctx_map);
 	free_cpumask_var(hctx->cpumask);
 	kfree(hctx->ctxs);
 	kfree(hctx);
block/blk-mq.c +2 -6
index 70d839b9c3b09..455fda99255a4 100644
@@ -2157,12 +2157,7 @@ static void blk_mq_exit_hctx(struct request_queue *q,
 	if (set->ops->exit_hctx)
 		set->ops->exit_hctx(hctx, hctx_idx);
 
-	if (hctx->flags & BLK_MQ_F_BLOCKING)
-		cleanup_srcu_struct(hctx->srcu);
-
 	blk_mq_remove_cpuhp(hctx);
-	blk_free_flush_queue(hctx->fq);
-	sbitmap_free(&hctx->ctx_map);
 }
 
 static void blk_mq_exit_hw_queues(struct request_queue *q,
@@ -2662,7 +2657,8 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 }
 EXPORT_SYMBOL(blk_mq_init_allocated_queue);
 
-void blk_mq_free_queue(struct request_queue *q)
+/* tags can _not_ be used after returning from blk_mq_exit_queue */
+void blk_mq_exit_queue(struct request_queue *q)
 {
 	struct blk_mq_tag_set	*set = q->tag_set;
 
block/blk-mq.h +1 -1
index 9497b47e2526c..5ad9251627f80 100644
@@ -31,7 +31,7 @@ struct blk_mq_ctx {
 } ____cacheline_aligned_in_smp;
 
 void blk_mq_freeze_queue(struct request_queue *q);
-void blk_mq_free_queue(struct request_queue *q);
+void blk_mq_exit_queue(struct request_queue *q);
 int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr);
 void blk_mq_wake_waiters(struct request_queue *q);
 bool blk_mq_dispatch_rq_list(struct request_queue *, struct list_head *, bool);
Signature · 1 line
2.20.1
author maintainer
#120 lore raw

PATCH 108/167 PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code

In reply to Sasha Levin

From: Jisheng Zhang <[email protected]>

[ Upstream commit e6fdd3bf5aecd8615f31a5128775b9abcf3e0d86 ]

Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path.

---
 .../pci/controller/dwc/pcie-designware-host.c | 21 +++++++------------
 1 file changed, 8 insertions(+), 13 deletions(-)
drivers/pci/controller/dwc/pcie-designware-host.c +8 -13
index acd50920c2ffd..b57ee79f6d699 100644
@@ -356,7 +356,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		dev_err(dev, "Missing *config* reg space\n");
 	}
 
-	bridge = pci_alloc_host_bridge(0);
+	bridge = devm_pci_alloc_host_bridge(dev, 0);
 	if (!bridge)
 		return -ENOMEM;
 
@@ -367,7 +367,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	ret = devm_request_pci_bus_resources(dev, &bridge->windows);
 	if (ret)
-		goto error;
+		return ret;
 
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry_safe(win, tmp, &bridge->windows) {
@@ -411,8 +411,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 						resource_size(pp->cfg));
 		if (!pci->dbi_base) {
 			dev_err(dev, "Error with ioremap\n");
-			ret = -ENOMEM;
-			goto error;
+			return -ENOMEM;
 		}
 	}
 
@@ -423,8 +422,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 					pp->cfg0_base, pp->cfg0_size);
 		if (!pp->va_cfg0_base) {
 			dev_err(dev, "Error with ioremap in function\n");
-			ret = -ENOMEM;
-			goto error;
+			return -ENOMEM;
 		}
 	}
 
@@ -434,8 +432,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 						pp->cfg1_size);
 		if (!pp->va_cfg1_base) {
 			dev_err(dev, "Error with ioremap\n");
-			ret = -ENOMEM;
-			goto error;
+			return -ENOMEM;
 		}
 	}
 
@@ -458,14 +455,14 @@ int dw_pcie_host_init(struct pcie_port *pp)
 			    pp->num_vectors == 0) {
 				dev_err(dev,
 					"Invalid number of vectors\n");
-				goto error;
+				return -EINVAL;
 			}
 		}
 
 		if (!pp->ops->msi_host_init) {
 			ret = dw_pcie_allocate_domains(pp);
 			if (ret)
-				goto error;
+				return ret;
 
 			if (pp->msi_irq)
 				irq_set_chained_handler_and_data(pp->msi_irq,
@@ -474,7 +471,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		} else {
 			ret = pp->ops->msi_host_init(pp);
 			if (ret < 0)
-				goto error;
+				return ret;
 		}
 	}
 
@@ -514,8 +511,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
 err_free_msi:
 	if (pci_msi_enabled() && !pp->ops->msi_host_init)
 		dw_pcie_free_msi(pp);
-error:
-	pci_free_host_bridge(bridge);
 	return ret;
 }
 
Signature · 1 line
2.20.1
author maintainer
#121 lore raw

PATCH 109/167 cifs: smbd: take an array of reqeusts when sending upper layer data

In reply to Sasha Levin

From: Long Li <[email protected]>

[ Upstream commit 4739f2328661d070f93f9bcc8afb2a82706c826d ]

To support compounding, __smb_send_rqst() now sends an array of requests to the transport layer.
Change smbd_send() to take an array of requests, and send them in as few packets as possible.

---
 fs/cifs/smbdirect.c | 55 +++++++++++++++++++++++----------------------
 fs/cifs/smbdirect.h |  5 +++--
 fs/cifs/transport.c |  2 +-
 3 files changed, 32 insertions(+), 30 deletions(-)
fs/cifs/smbdirect.c +28 -27
index 5fdb9a509a97f..1959931e14c1e 100644
@@ -2090,7 +2090,8 @@ int smbd_recv(struct smbd_connection *info, struct msghdr *msg)
  * rqst: the data to write
  * return value: 0 if successfully write, otherwise error code
  */
-int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst)
+int smbd_send(struct TCP_Server_Info *server,
+	int num_rqst, struct smb_rqst *rqst_array)
 {
 	struct smbd_connection *info = server->smbd_conn;
 	struct kvec vec;
@@ -2102,6 +2103,8 @@ int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst)
 		info->max_send_size - sizeof(struct smbd_data_transfer);
 	struct kvec *iov;
 	int rc;
+	struct smb_rqst *rqst;
+	int rqst_idx;
 
 	info->smbd_send_pending++;
 	if (info->transport_status != SMBD_CONNECTED) {
@@ -2109,47 +2112,41 @@ int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst)
 		goto done;
 	}
 
-	/*
-	 * Skip the RFC1002 length defined in MS-SMB2 section 2.1
-	 * It is used only for TCP transport in the iov[0]
-	 * In future we may want to add a transport layer under protocol
-	 * layer so this will only be issued to TCP transport
-	 */
-
-	if (rqst->rq_iov[0].iov_len != 4) {
-		log_write(ERR, "expected the pdu length in 1st iov, but got %zu\n", rqst->rq_iov[0].iov_len);
-		return -EINVAL;
-	}
-
 	/*
 	 * Add in the page array if there is one. The caller needs to set
 	 * rq_tailsz to PAGE_SIZE when the buffer has multiple pages and
 	 * ends at page boundary
 	 */
-	buflen = smb_rqst_len(server, rqst);
+	remaining_data_length = 0;
+	for (i = 0; i < num_rqst; i++)
+		remaining_data_length += smb_rqst_len(server, &rqst_array[i]);
 
-	if (buflen + sizeof(struct smbd_data_transfer) >
+	if (remaining_data_length + sizeof(struct smbd_data_transfer) >
 		info->max_fragmented_send_size) {
 		log_write(ERR, "payload size %d > max size %d\n",
-			buflen, info->max_fragmented_send_size);
+			remaining_data_length, info->max_fragmented_send_size);
 		rc = -EINVAL;
 		goto done;
 	}
 
-	iov = &rqst->rq_iov[1];
+	rqst_idx = 0;
+
+next_rqst:
+	rqst = &rqst_array[rqst_idx];
+	iov = rqst->rq_iov;
 
-	cifs_dbg(FYI, "Sending smb (RDMA): smb_len=%u\n", buflen);
-	for (i = 0; i < rqst->rq_nvec-1; i++)
+	cifs_dbg(FYI, "Sending smb (RDMA): idx=%d smb_len=%lu\n",
+		rqst_idx, smb_rqst_len(server, rqst));
+	for (i = 0; i < rqst->rq_nvec; i++)
 		dump_smb(iov[i].iov_base, iov[i].iov_len);
 
-	remaining_data_length = buflen;
 
-	log_write(INFO, "rqst->rq_nvec=%d rqst->rq_npages=%d rq_pagesz=%d "
-		"rq_tailsz=%d buflen=%d\n",
-		rqst->rq_nvec, rqst->rq_npages, rqst->rq_pagesz,
-		rqst->rq_tailsz, buflen);
+	log_write(INFO, "rqst_idx=%d nvec=%d rqst->rq_npages=%d rq_pagesz=%d "
+		"rq_tailsz=%d buflen=%lu\n",
+		rqst_idx, rqst->rq_nvec, rqst->rq_npages, rqst->rq_pagesz,
+		rqst->rq_tailsz, smb_rqst_len(server, rqst));
 
-	start = i = iov[0].iov_len ? 0 : 1;
+	start = i = 0;
 	buflen = 0;
 	while (true) {
 		buflen += iov[i].iov_len;
@@ -2197,14 +2194,14 @@ int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst)
 						goto done;
 				}
 				i++;
-				if (i == rqst->rq_nvec-1)
+				if (i == rqst->rq_nvec)
 					break;
 			}
 			start = i;
 			buflen = 0;
 		} else {
 			i++;
-			if (i == rqst->rq_nvec-1) {
+			if (i == rqst->rq_nvec) {
 				/* send out all remaining vecs */
 				remaining_data_length -= buflen;
 				log_write(INFO,
@@ -2248,6 +2245,10 @@ int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst)
 		}
 	}
 
+	rqst_idx++;
+	if (rqst_idx < num_rqst)
+		goto next_rqst;
+
 done:
 	/*
 	 * As an optimization, we don't wait for individual I/O to finish
fs/cifs/smbdirect.h +3 -2
index a11096254f296..b5c240ff21919 100644
@@ -292,7 +292,8 @@ void smbd_destroy(struct smbd_connection *info);
 
 /* Interface for carrying upper layer I/O through send/recv */
 int smbd_recv(struct smbd_connection *info, struct msghdr *msg);
-int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst);
+int smbd_send(struct TCP_Server_Info *server,
+	int num_rqst, struct smb_rqst *rqst);
 
 enum mr_state {
 	MR_READY,
@@ -332,7 +333,7 @@ static inline void *smbd_get_connection(
 static inline int smbd_reconnect(struct TCP_Server_Info *server) {return -1; }
 static inline void smbd_destroy(struct smbd_connection *info) {}
 static inline int smbd_recv(struct smbd_connection *info, struct msghdr *msg) {return -1; }
-static inline int smbd_send(struct TCP_Server_Info *server, struct smb_rqst *rqst) {return -1; }
+static inline int smbd_send(struct TCP_Server_Info *server, int num_rqst, struct smb_rqst *rqst) {return -1; }
 #endif
 
 #endif
fs/cifs/transport.c +1 -1
index f2938bd95c40e..fe77f41bff9f2 100644
@@ -287,7 +287,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
 	__be32 rfc1002_marker;
 
 	if (cifs_rdma_enabled(server) && server->smbd_conn) {
-		rc = smbd_send(server, rqst);
+		rc = smbd_send(server, num_rqst, rqst);
 		goto smbd_done;
 	}
 	if (ssocket == NULL)
Signature · 1 line
2.20.1
author maintainer
#130 lore raw

PATCH 115/167 kvm: Check irqchip mode before assign irqfd

In reply to Sasha Levin

From: Peter Xu <[email protected]>

[ Upstream commit 654f1f13ea56b92bacade8ce2725aea0457f91c0 ]

When assigning kvm irqfd we didn't check the irqchip mode but we allow KVM_IRQFD to succeed with all the irqchip modes. However it does not make much sense to create irqfd even without the kernel chips. Let's provide a arch-dependent helper to check whether a specific irqfd is allowed by the arch. At least for x86, it should make sense to check:

- when irqchip mode is NONE, all irqfds should be disallowed, and,

- when irqchip mode is SPLIT, irqfds that are with resamplefd should be disallowed.

For either of the case, previously we'll silently ignore the irq or the irq ack event if the irqchip mode is incorrect. However that can cause misterious guest behaviors and it can be hard to triage. Let's fail KVM_IRQFD even earlier to detect these incorrect configurations.

CC Paolo Bonzini <[email protected]>
CC Radim Krčmář <[email protected]>
CC Alex Williamson <[email protected]>
CC Eduardo Habkost <[email protected]>
---
 arch/x86/kvm/irq.c | 7 +++++++
 arch/x86/kvm/irq.h | 1 +
 virt/kvm/eventfd.c | 9 +++++++++
 3 files changed, 17 insertions(+)
arch/x86/kvm/irq.c +7 -0
index faa264822cee3..007bc654f928a 100644
@@ -172,3 +172,10 @@ void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
 	__kvm_migrate_apic_timer(vcpu);
 	__kvm_migrate_pit_timer(vcpu);
 }
+
+bool kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args)
+{
+	bool resample = args->flags & KVM_IRQFD_FLAG_RESAMPLE;
+
+	return resample ? irqchip_kernel(kvm) : irqchip_in_kernel(kvm);
+}
arch/x86/kvm/irq.h +1 -0
index d5005cc265217..fd210cdd49839 100644
@@ -114,6 +114,7 @@ static inline int irqchip_in_kernel(struct kvm *kvm)
 	return mode != KVM_IRQCHIP_NONE;
 }
 
+bool kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args);
 void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu);
virt/kvm/eventfd.c +9 -0
index b20b751286fc6..757a17f5ebdeb 100644
@@ -44,6 +44,12 @@
 
 static struct workqueue_struct *irqfd_cleanup_wq;
 
+bool __attribute__((weak))
+kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args)
+{
+	return true;
+}
+
 static void
 irqfd_inject(struct work_struct *work)
 {
@@ -297,6 +303,9 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
 	if (!kvm_arch_intc_initialized(kvm))
 		return -EAGAIN;
 
+	if (!kvm_arch_irqfd_allowed(kvm, args))
+		return -EINVAL;
+
 	irqfd = kzalloc(sizeof(*irqfd), GFP_KERNEL);
 	if (!irqfd)
 		return -ENOMEM;
Signature · 1 line
2.20.1
author maintainer
#137 lore raw

PATCH 122/167 IB/hfi1: Avoid hardlockup with flushlist_lock

In reply to Sasha Levin

From: Mike Marciniszyn <[email protected]>

[ Upstream commit cf131a81967583ae737df6383a0893b9fee75b4e ]

Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress.

Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes.

---
 drivers/infiniband/hw/hfi1/sdma.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/infiniband/hw/hfi1/sdma.c +3 -6
index 88e326d6cc494..d648a4167832c 100644
@@ -410,10 +410,7 @@ static void sdma_flush(struct sdma_engine *sde)
 	sdma_flush_descq(sde);
 	spin_lock_irqsave(&sde->flushlist_lock, flags);
 	/* copy flush list */
-	list_for_each_entry_safe(txp, txp_next, &sde->flushlist, list) {
-		list_del_init(&txp->list);
-		list_add_tail(&txp->list, &flushlist);
-	}
+	list_splice_init(&sde->flushlist, &flushlist);
 	spin_unlock_irqrestore(&sde->flushlist_lock, flags);
 	/* flush from flush list */
 	list_for_each_entry_safe(txp, txp_next, &flushlist, list)
@@ -2426,7 +2423,7 @@ int sdma_send_txreq(struct sdma_engine *sde,
 		wait->tx_count++;
 		wait->count += tx->num_desc;
 	}
-	schedule_work(&sde->flush_worker);
+	queue_work_on(sde->cpu, system_highpri_wq, &sde->flush_worker);
 	ret = -ECOMM;
 	goto unlock;
 nodesc:
@@ -2526,7 +2523,7 @@ int sdma_send_txlist(struct sdma_engine *sde, struct iowait *wait,
 		}
 	}
 	spin_unlock(&sde->flushlist_lock);
-	schedule_work(&sde->flush_worker);
+	queue_work_on(sde->cpu, system_highpri_wq, &sde->flush_worker);
 	ret = -ECOMM;
 	goto update_tail;
 nodesc:
Signature · 1 line
2.20.1
author maintainer
#133 lore raw

PATCH 118/167 Btrfs: fix race between block group removal and block group allocation

In reply to Sasha Levin

From: Filipe Manana <[email protected]>

[ Upstream commit 8eaf40c0e24e98899a0f3ac9d25a33aafe13822a ]

If a task is removing the block group that currently has the highest start offset amongst all existing block groups, there is a short time window where it races with a concurrent block group allocation, resulting in a transaction abort with an error code of EEXIST.

The following diagram explains the race in detail:

Task A Task B

btrfs_remove_block_group(bg offset X)

remove_extent_mapping(em offset X)
-> removes extent map X from the
tree of extent maps
(fs_info->mapping_tree), so the
next call to find_next_chunk()
will return offset X

btrfs_alloc_chunk()
find_next_chunk()
--> returns offset X

__btrfs_alloc_chunk(offset X)
btrfs_make_block_group()
btrfs_create_block_group_cache()
--> creates btrfs_block_group_cache
object with a key corresponding to the block group item in the extent, the key is:
(offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G)

--> adds the btrfs_block_group_cache object
to the list new_bgs of the transaction handle

btrfs_end_transaction(trans handle)
__btrfs_end_transaction()
btrfs_create_pending_block_groups()
--> sees the new btrfs_block_group_cache
in the new_bgs list of the transaction handle
--> its call to btrfs_insert_item() fails
with -EEXIST when attempting to insert the block group item key (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) because task A has not removed that key yet
--> aborts the running transaction with
error -EEXIST

btrfs_del_item()
-> removes the block group's key from
the extent tree, key is
(offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G)

A sample transaction abort trace:

  [78912.403537] ------------[ cut here ]------------
  [78912.403811] BTRFS: Transaction aborted (error -17)
  [78912.404082] WARNING: CPU: 2 PID: 20465 at fs/btrfs/extent-tree.c:10551 btrfs_create_pending_block_groups+0x196/0x250 [btrfs]
  (...)
  [78912.405642] CPU: 2 PID: 20465 Comm: btrfs Tainted: G        W         5.0.0-btrfs-next-46 #1
  [78912.405941] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
  [78912.406586] RIP: 0010:btrfs_create_pending_block_groups+0x196/0x250 [btrfs]
  (...)
  [78912.407636] RSP: 0018:ffff9d3d4b7e3b08 EFLAGS: 00010282
  [78912.407997] RAX: 0000000000000000 RBX: ffff90959a3796f0 RCX: 0000000000000006
  [78912.408369] RDX: 0000000000000007 RSI: 0000000000000001 RDI: ffff909636b16860
  [78912.408746] RBP: ffff909626758a58 R08: 0000000000000000 R09: 0000000000000000
  [78912.409144] R10: ffff9095ff462400 R11: 0000000000000000 R12: ffff90959a379588
  [78912.409521] R13: ffff909626758ab0 R14: ffff9095036c0000 R15: ffff9095299e1158
  [78912.409899] FS:  00007f387f16f700(0000) GS:ffff909636b00000(0000) knlGS:0000000000000000
  [78912.410285] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [78912.410673] CR2: 00007f429fc87cbc CR3: 000000014440a004 CR4: 00000000003606e0
  [78912.411095] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [78912.411496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [78912.411898] Call Trace:
  [78912.412318]  __btrfs_end_transaction+0x5b/0x1c0 [btrfs]
  [78912.412746]  btrfs_inc_block_group_ro+0xcf/0x160 [btrfs]
  [78912.413179]  scrub_enumerate_chunks+0x188/0x5b0 [btrfs]
  [78912.413622]  ? __mutex_unlock_slowpath+0x100/0x2a0
  [78912.414078]  btrfs_scrub_dev+0x2ef/0x720 [btrfs]
  [78912.414535]  ? __sb_start_write+0xd4/0x1c0
  [78912.414963]  ? mnt_want_write_file+0x24/0x50
  [78912.415403]  btrfs_ioctl+0x17fb/0x3120 [btrfs]
  [78912.415832]  ? lock_acquire+0xa6/0x190
  [78912.416256]  ? do_vfs_ioctl+0xa2/0x6f0
  [78912.416685]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [78912.417116]  do_vfs_ioctl+0xa2/0x6f0
  [78912.417534]  ? __fget+0x113/0x200
  [78912.417954]  ksys_ioctl+0x70/0x80
  [78912.418369]  __x64_sys_ioctl+0x16/0x20
  [78912.418812]  do_syscall_64+0x60/0x1b0
  [78912.419231]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [78912.419644] RIP: 0033:0x7f3880252dd7
  (...)
  [78912.420957] RSP: 002b:00007f387f16ed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [78912.421426] RAX: ffffffffffffffda RBX: 000055f5becc1df0 RCX: 00007f3880252dd7
  [78912.421889] RDX: 000055f5becc1df0 RSI: 00000000c400941b RDI: 0000000000000003
  [78912.422354] RBP: 0000000000000000 R08: 00007f387f16f700 R09: 0000000000000000
  [78912.422790] R10: 00007f387f16f700 R11: 0000000000000246 R12: 0000000000000000
  [78912.423202] R13: 00007ffda49c266f R14: 0000000000000000 R15: 00007f388145e040
  [78912.425505] ---[ end trace eb9bfe7c426fc4d3 ]---

Fix this by calling remove_extent_mapping(), at btrfs_remove_block_group(), only at the very end, after removing the block group item key from the extent tree (and removing the free space tree entry if we are using the free space tree feature).

Fixes 04216820fe83d5 ("Btrfs: fix race between fs trimming and block group remove/allocation")
---
 fs/btrfs/extent-tree.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)
fs/btrfs/extent-tree.c +18 -16
index 0cc800d22a081..88c939f7aad96 100644
@@ -10478,22 +10478,6 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	}
 	spin_unlock(&block_group->lock);
 
-	if (remove_em) {
-		struct extent_map_tree *em_tree;
-
-		em_tree = &fs_info->mapping_tree.map_tree;
-		write_lock(&em_tree->lock);
-		/*
-		 * The em might be in the pending_chunks list, so make sure the
-		 * chunk mutex is locked, since remove_extent_mapping() will
-		 * delete us from that list.
-		 */
-		remove_extent_mapping(em_tree, em);
-		write_unlock(&em_tree->lock);
-		/* once for the tree */
-		free_extent_map(em);
-	}
-
 	mutex_unlock(&fs_info->chunk_mutex);
 
 	ret = remove_block_group_free_space(trans, block_group);
@@ -10510,6 +10494,24 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 		goto out;
 
 	ret = btrfs_del_item(trans, root, path);
+	if (ret)
+		goto out;
+
+	if (remove_em) {
+		struct extent_map_tree *em_tree;
+
+		em_tree = &fs_info->mapping_tree.map_tree;
+		write_lock(&em_tree->lock);
+		/*
+		 * The em might be in the pending_chunks list, so make sure the
+		 * chunk mutex is locked, since remove_extent_mapping() will
+		 * delete us from that list.
+		 */
+		remove_extent_mapping(em_tree, em);
+		write_unlock(&em_tree->lock);
+		/* once for the tree */
+		free_extent_map(em);
+	}
 out:
 	btrfs_free_path(path);
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#152 lore raw

PATCH 128/167 scsi: zfcp: fix request object use-after-free in send path causing wrong traces

In reply to Sasha Levin

From: Benjamin Block <[email protected]>

[ Upstream commit 106d45f350c7cac876844dc685845cba4ffdb70b ]

When tracing instances where we open and close WKA ports, we also pass the request-ID of the respective FSF command.

But after successfully sending the FSF command we must not use the request-object anymore, as this might result in an use-after-free (see "zfcp: fix request object use-after-free in send path causing seqno errors" ).

To fix this add a new variable that caches the request-ID before sending the request. This won't change during the hand-off to the FCP channel, and so it's safe to trace this cached request-ID later, instead of using the request object.

Fixes d27a7cb91960 ("zfcp: trace on request for open and close of WKA port")
Cc <[email protected]> #2.6.38+
---
 drivers/s390/scsi/zfcp_fsf.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/s390/scsi/zfcp_fsf.c +8 -2
index 3c86e27f094de..aff073a5b52bf 100644
@@ -1594,6 +1594,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
 {
 	struct zfcp_qdio *qdio = wka_port->adapter->qdio;
 	struct zfcp_fsf_req *req;
+	unsigned long req_id = 0;
 	int retval = -EIO;
 
 	spin_lock_irq(&qdio->req_q_lock);
@@ -1616,6 +1617,8 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
 	hton24(req->qtcb->bottom.support.d_id, wka_port->d_id);
 	req->data = wka_port;
 
+	req_id = req->req_id;
+
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 	if (retval)
@@ -1623,7 +1626,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
 out:
 	spin_unlock_irq(&qdio->req_q_lock);
 	if (!retval)
-		zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id);
+		zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req_id);
 	return retval;
 }
 
@@ -1649,6 +1652,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
 {
 	struct zfcp_qdio *qdio = wka_port->adapter->qdio;
 	struct zfcp_fsf_req *req;
+	unsigned long req_id = 0;
 	int retval = -EIO;
 
 	spin_lock_irq(&qdio->req_q_lock);
@@ -1671,6 +1675,8 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
 	req->data = wka_port;
 	req->qtcb->header.port_handle = wka_port->handle;
 
+	req_id = req->req_id;
+
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 	if (retval)
@@ -1678,7 +1684,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
 out:
 	spin_unlock_irq(&qdio->req_q_lock);
 	if (!retval)
-		zfcp_dbf_rec_run_wka("fscwp_1", wka_port, req->req_id);
+		zfcp_dbf_rec_run_wka("fscwp_1", wka_port, req_id);
 	return retval;
 }
 
Signature · 1 line
2.20.1
author maintainer
#156 lore raw

PATCH 132/167 KVM: x86: optimize check for valid PAT value

In reply to Sasha Levin

From: Paolo Bonzini <[email protected]>

[ Upstream commit 674ea351cdeb01d2740edce31db7f2d79ce6095d ]

This check will soon be done on every nested vmentry and vmexit, "parallelize" it using bitwise operations.

---
 arch/x86/kvm/mtrr.c | 10 +---------
 arch/x86/kvm/vmx.c  |  2 +-
 arch/x86/kvm/x86.h  | 10 ++++++++++
 3 files changed, 12 insertions(+), 10 deletions(-)
arch/x86/kvm/mtrr.c +1 -9
index e9ea2d45ae66b..9f72cc427158e 100644
@@ -48,11 +48,6 @@ static bool msr_mtrr_valid(unsigned msr)
 	return false;
 }
 
-static bool valid_pat_type(unsigned t)
-{
-	return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */
-}
-
 static bool valid_mtrr_type(unsigned t)
 {
 	return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */
@@ -67,10 +62,7 @@ bool kvm_mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		return false;
 
 	if (msr == MSR_IA32_CR_PAT) {
-		for (i = 0; i < 8; i++)
-			if (!valid_pat_type((data >> (i * 8)) & 0xff))
-				return false;
-		return true;
+		return kvm_pat_valid(data);
 	} else if (msr == MSR_MTRRdefType) {
 		if (data & ~0xcff)
 			return false;
arch/x86/kvm/vmx.c +1 -1
index ee9ff20da3902..feff7ed44a2bb 100644
@@ -4266,7 +4266,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		break;
 	case MSR_IA32_CR_PAT:
 		if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
-			if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
+			if (!kvm_pat_valid(data))
 				return 1;
 			vmcs_write64(GUEST_IA32_PAT, data);
 			vcpu->arch.pat = data;
arch/x86/kvm/x86.h +10 -0
index 8889e0c029a70..3a91ea760f073 100644
@@ -345,6 +345,16 @@ static inline void kvm_after_interrupt(struct kvm_vcpu *vcpu)
 	__this_cpu_write(current_vcpu, NULL);
 }
 
+
+static inline bool kvm_pat_valid(u64 data)
+{
+	if (data & 0xF8F8F8F8F8F8F8F8ull)
+		return false;
+	/* 0, 1, 4, 5, 6, 7 are valid values.  */
+	return (data | ((data & 0x0202020202020202ull) << 1)) == data;
+}
+
 void kvm_load_guest_xcr0(struct kvm_vcpu *vcpu);
 void kvm_put_guest_xcr0(struct kvm_vcpu *vcpu);
+
 #endif
Signature · 1 line
2.20.1
author maintainer
#158 lore raw

PATCH 134/167 KVM: VMX: Fix handling of #MC that occurs during VM-Entry

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit beb8d93b3e423043e079ef3dda19dad7b28467a8 ]

A previous fix to prevent KVM from consuming stale VMCS state after a failed VM-Entry inadvertantly blocked KVM's handling of machine checks that occur during VM-Entry.

Per Intel's SDM, a #MC during VM-Entry is handled in one of three ways, depending on when the #MC is recognoized. As it pertains to this bug fix, the third case explicitly states EXIT_REASON_MCE_DURING_VMENTRY is handled like any other VM-Exit during VM-Entry, i.e. sets bit 31 to indicate the VM-Entry failed.

If a machine-check event occurs during a VM entry, one of the following occurs:
- The machine-check event is handled as if it occurred before the VM entry:

        ...
 - The machine-check event is handled after VM entry completes:
        ...

- A VM-entry failure occurs as described in Section 26.7. The basic exit reason is 41, for "VM-entry failure due to machine-check event".

Explicitly handle EXIT_REASON_MCE_DURING_VMENTRY as a one-off case in vmx_vcpu_run() instead of binning it into vmx_complete_atomic_exit(). Doing so allows vmx_vcpu_run() to handle VMX_EXIT_REASONS_FAILED_VMENTRY in a sane fashion and also simplifies vmx_complete_atomic_exit() since VMCS.VM_EXIT_INTR_INFO is guaranteed to be fresh.

Fixes b060ca3b2e9e7 ("kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly")
---
 arch/x86/kvm/vmx.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)
arch/x86/kvm/vmx.c +8 -12
index e4bba840a0708..82253d31842a2 100644
@@ -10438,28 +10438,21 @@ static void vmx_apicv_post_state_restore(struct kvm_vcpu *vcpu)
 
 static void vmx_complete_atomic_exit(struct vcpu_vmx *vmx)
 {
-	u32 exit_intr_info = 0;
-	u16 basic_exit_reason = (u16)vmx->exit_reason;
-
-	if (!(basic_exit_reason == EXIT_REASON_MCE_DURING_VMENTRY
-	      || basic_exit_reason == EXIT_REASON_EXCEPTION_NMI))
+	if (vmx->exit_reason != EXIT_REASON_EXCEPTION_NMI)
 		return;
 
-	if (!(vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
-		exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
-	vmx->exit_intr_info = exit_intr_info;
+	vmx->exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
 	/* if exit due to PF check for async PF */
-	if (is_page_fault(exit_intr_info))
+	if (is_page_fault(vmx->exit_intr_info))
 		vmx->vcpu.arch.apf.host_apf_reason = kvm_read_and_reset_pf_reason();
 
 	/* Handle machine checks before interrupts are enabled */
-	if (basic_exit_reason == EXIT_REASON_MCE_DURING_VMENTRY ||
-	    is_machine_check(exit_intr_info))
+	if (is_machine_check(vmx->exit_intr_info))
 		kvm_machine_check();
 
 	/* We need to handle NMIs before interrupts are enabled */
-	if (is_nmi(exit_intr_info)) {
+	if (is_nmi(vmx->exit_intr_info)) {
 		kvm_before_interrupt(&vmx->vcpu);
 		asm("int $2");
 		kvm_after_interrupt(&vmx->vcpu);
@@ -10980,6 +10973,9 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	vmx->idt_vectoring_info = 0;
 
 	vmx->exit_reason = vmx->fail ? 0xdead : vmcs_read32(VM_EXIT_REASON);
+	if ((u16)vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY)
+		kvm_machine_check();
+
 	if (vmx->fail || (vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
 		return;
 
Signature · 1 line
2.20.1
author maintainer
#159 lore raw

PATCH 135/167 KVM: VMX: check CPUID before allowing read/write of IA32_XSS

In reply to Sasha Levin

From: Wanpeng Li <[email protected]>

[ Upstream commit 4d763b168e9c5c366b05812c7bba7662e5ea3669 ]

Raise #GP when guest read/write IA32_XSS, but the CPUID bits say that it shouldn't exist.

Fixes 203000993de5 (kvm: vmx: add MSR logic for XSAVES)
Cc Paolo Bonzini <[email protected]>
Cc Radim Krčmář <[email protected]>
---
 arch/x86/kvm/vmx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
arch/x86/kvm/vmx.c +8 -2
index 82253d31842a2..2938b4bcc9684 100644
@@ -4135,7 +4135,10 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		return vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index,
 				       &msr_info->data);
 	case MSR_IA32_XSS:
-		if (!vmx_xsaves_supported())
+		if (!vmx_xsaves_supported() ||
+		    (!msr_info->host_initiated &&
+		     !(guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
+		       guest_cpuid_has(vcpu, X86_FEATURE_XSAVES))))
 			return 1;
 		msr_info->data = vcpu->arch.ia32_xss;
 		break;
@@ -4302,7 +4305,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			return 1;
 		return vmx_set_vmx_msr(vcpu, msr_index, data);
 	case MSR_IA32_XSS:
-		if (!vmx_xsaves_supported())
+		if (!vmx_xsaves_supported() ||
+		    (!msr_info->host_initiated &&
+		     !(guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
+		       guest_cpuid_has(vcpu, X86_FEATURE_XSAVES))))
 			return 1;
 		/*
 		 * The only supported bit as of Skylake is bit 8, but
Signature · 1 line
2.20.1
author maintainer
#163 lore raw

PATCH 139/167 RDMA/srp: Document srp_parse_in() arguments

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit e37df2d5b569390e3b80ebed9a73fd5b9dcda010 ]

This patch avoids that a warning is reported when building with W=1.

---
 drivers/infiniband/ulp/srp/ib_srp.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/infiniband/ulp/srp/ib_srp.c +3 -0
index 2c1114ee0c6da..9da30d88a615e 100644
@@ -3401,6 +3401,9 @@ static const match_table_t srp_opt_tokens = {
 
 /**
  * srp_parse_in - parse an IP address and port number combination
+ * @net:	   [in]  Network namespace.
+ * @sa:		   [out] Address family, IP address and port number.
+ * @addr_port_str: [in]  IP address and port number.
  *
  * Parse the following address formats:
  * - IPv4: <ip_address>:<port>, e.g. 1.2.3.4:5.
Signature · 1 line
2.20.1
author maintainer
#165 lore raw

PATCH 141/167 btrfs: correctly validate compression type

In reply to Sasha Levin

From: Johannes Thumshirn <[email protected]>

[ Upstream commit aa53e3bfac7205fb3a8815ac1c937fd6ed01b41e ]

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979
[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff
[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)
[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected
[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values.

Fixes 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
---
 fs/btrfs/compression.c | 16 ++++++++++++++++
 fs/btrfs/compression.h |  1 +
 fs/btrfs/props.c       |  6 +-----
 3 files changed, 18 insertions(+), 5 deletions(-)
fs/btrfs/compression.c +16 -0
index 9bfa66592aa7b..c71e534ca7ef6 100644
@@ -42,6 +42,22 @@ const char* btrfs_compress_type2str(enum btrfs_compression_type type)
 	return NULL;
 }
 
+bool btrfs_compress_is_valid_type(const char *str, size_t len)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(btrfs_compress_types); i++) {
+		size_t comp_len = strlen(btrfs_compress_types[i]);
+
+		if (len < comp_len)
+			continue;
+
+		if (!strncmp(btrfs_compress_types[i], str, comp_len))
+			return true;
+	}
+	return false;
+}
+
 static int btrfs_decompress_bio(struct compressed_bio *cb);
 
 static inline int compressed_bio_size(struct btrfs_fs_info *fs_info,
fs/btrfs/compression.h +1 -0
index ddda9b80bf204..f97d90a1fa531 100644
@@ -127,6 +127,7 @@ extern const struct btrfs_compress_op btrfs_lzo_compress;
 extern const struct btrfs_compress_op btrfs_zstd_compress;
 
 const char* btrfs_compress_type2str(enum btrfs_compression_type type);
+bool btrfs_compress_is_valid_type(const char *str, size_t len);
 
 int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);
 
fs/btrfs/props.c +1 -5
index 61d22a56c0ba4..6980a0e13f18e 100644
@@ -366,11 +366,7 @@ int btrfs_subvol_inherit_props(struct btrfs_trans_handle *trans,
 
 static int prop_compression_validate(const char *value, size_t len)
 {
-	if (!strncmp("lzo", value, 3))
-		return 0;
-	else if (!strncmp("zlib", value, 4))
-		return 0;
-	else if (!strncmp("zstd", value, 4))
+	if (btrfs_compress_is_valid_type(value, len))
 		return 0;
 
 	return -EINVAL;
Signature · 1 line
2.20.1
author maintainer
#166 lore raw

PATCH 142/167 resource: Include resource end in walk_*() interfaces

In reply to Sasha Levin

From: Bjorn Helgaas <[email protected]>

[ Upstream commit a98959fdbda1849a01b2150bb635ed559ec06700 ]

find_next_iomem_res() finds an iomem resource that covers part of a range described by "start, end". All callers expect that range to be inclusive, i.e., both start and end are included, but find_next_iomem_res() doesn't handle the end address correctly.

If it finds an iomem resource that contains exactly the end address, it skips it, e.g., if "start, end" is [0x0-0x10000] and there happens to be an iomem resource [mem 0x10000-0x10000] (the single byte at 0x10000), we skip it:

  find_next_iomem_res(...)
  {
    start = 0x0;
    end = 0x10000;
    for (p = next_resource(...)) {
      # p->start = 0x10000;
      # p->end = 0x10000;
      # we *should* return this resource, but this condition is false:
      if ((p->end >= start) && (p->start < end))
        break;

Adjust find_next_iomem_res() so it allows a resource that includes the single byte at the end of the range. This is a corner case that we probably don't see in practice.

Fixes 58c1b5b07907 ("[PATCH] memory hotadd fixes: find_next_system_ram catch range fix")
CC Andrew Morton <[email protected]>
CC Brijesh Singh <[email protected]>
CC Dan Williams <[email protected]>
CC H. Peter Anvin <[email protected]>
CC Lianbo Jiang <[email protected]>
CC Takashi Iwai <[email protected]>
CC Thomas Gleixner <[email protected]>
CC Tom Lendacky <[email protected]>
CC Vivek Goyal <[email protected]>
CC Yaowei Bai <[email protected]>
CC x86-ml <[email protected]>
---
 kernel/resource.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/resource.c +2 -2
index 30e1bc68503b5..155ec873ea4d1 100644
@@ -319,7 +319,7 @@ int release_resource(struct resource *old)
 EXPORT_SYMBOL(release_resource);
 
 /*
- * Finds the lowest iomem resource existing within [res->start.res->end).
+ * Finds the lowest iomem resource existing within [res->start..res->end].
  * The caller must specify res->start, res->end, res->flags, and optionally
  * desc.  If found, returns 0, res is overwritten, if not found, returns -1.
  * This function walks the whole tree and not just first level children until
@@ -352,7 +352,7 @@ static int find_next_iomem_res(struct resource *res, unsigned long desc,
 			p = NULL;
 			break;
 		}
-		if ((p->end >= start) && (p->start < end))
+		if ((p->end >= start) && (p->start <= end))
 			break;
 	}
 
Signature · 7 lines
2.20.1


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
author maintainer
#164 lore raw

PATCH 140/167 RDMA/srp: Accept again source addresses that do not have a port number

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit bcef5b7215681250c4bf8961dfe15e9e4fef97d0 ]

The function srp_parse_in() is used both for parsing source address specifications and for target address specifications. Target addresses must have a port number. Having to specify a port number for source addresses is inconvenient. Make sure that srp_parse_in() supports again parsing addresses with no port number.

Fixes c62adb7def71 ("IB/srp: Fix IPv6 address parsing")
---
 drivers/infiniband/ulp/srp/ib_srp.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/infiniband/ulp/srp/ib_srp.c +15 -6
index 9da30d88a615e..bc6a44a16445c 100644
@@ -3404,13 +3404,14 @@ static const match_table_t srp_opt_tokens = {
  * @net:	   [in]  Network namespace.
  * @sa:		   [out] Address family, IP address and port number.
  * @addr_port_str: [in]  IP address and port number.
+ * @has_port:	   [out] Whether or not @addr_port_str includes a port number.
  *
  * Parse the following address formats:
  * - IPv4: <ip_address>:<port>, e.g. 1.2.3.4:5.
  * - IPv6: \[<ipv6_address>\]:<port>, e.g. [1::2:3%4]:5.
  */
 static int srp_parse_in(struct net *net, struct sockaddr_storage *sa,
-			const char *addr_port_str)
+			const char *addr_port_str, bool *has_port)
 {
 	char *addr_end, *addr = kstrdup(addr_port_str, GFP_KERNEL);
 	char *port_str;
@@ -3419,9 +3420,12 @@ static int srp_parse_in(struct net *net, struct sockaddr_storage *sa,
 	if (!addr)
 		return -ENOMEM;
 	port_str = strrchr(addr, ':');
-	if (!port_str)
-		return -EINVAL;
-	*port_str++ = '\0';
+	if (port_str && strchr(port_str, ']'))
+		port_str = NULL;
+	if (port_str)
+		*port_str++ = '\0';
+	if (has_port)
+		*has_port = port_str != NULL;
 	ret = inet_pton_with_scope(net, AF_INET, addr, port_str, sa);
 	if (ret && addr[0]) {
 		addr_end = addr + strlen(addr) - 1;
@@ -3443,6 +3447,7 @@ static int srp_parse_options(struct net *net, const char *buf,
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	unsigned long long ull;
+	bool has_port;
 	int opt_mask = 0;
 	int token;
 	int ret = -EINVAL;
@@ -3541,7 +3546,8 @@ static int srp_parse_options(struct net *net, const char *buf,
 				ret = -ENOMEM;
 				goto out;
 			}
-			ret = srp_parse_in(net, &target->rdma_cm.src.ss, p);
+			ret = srp_parse_in(net, &target->rdma_cm.src.ss, p,
+					   NULL);
 			if (ret < 0) {
 				pr_warn("bad source parameter '%s'\n", p);
 				kfree(p);
@@ -3557,7 +3563,10 @@ static int srp_parse_options(struct net *net, const char *buf,
 				ret = -ENOMEM;
 				goto out;
 			}
-			ret = srp_parse_in(net, &target->rdma_cm.dst.ss, p);
+			ret = srp_parse_in(net, &target->rdma_cm.dst.ss, p,
+					   &has_port);
+			if (!has_port)
+				ret = -EINVAL;
 			if (ret < 0) {
 				pr_warn("bad dest parameter '%s'\n", p);
 				kfree(p);
Signature · 1 line
2.20.1
author maintainer
#154 lore raw

PATCH 130/167 ALSA: hda - Don't resume forcibly i915 HDMI/DP codec

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 4914da2fb0c89205790503f20dfdde854f3afdd8 ]

We apply the codec resume forcibly at system resume callback for updating and syncing the jack detection state that may have changed during sleeping. This is, however, superfluous for the codec like Intel HDMI/DP, where the jack detection is managed via the audio component notification; i.e. the jack state change shall be reported sooner or later from the graphics side at mode change.

This patch changes the codec resume callback to avoid the forcible resume conditionally with a new flag, codec->relaxed_resume, for reducing the resume time. The flag is set in the codec probe.

Although this doesn't fix the entire bug mentioned in the bugzilla entry below, it's still a good optimization and some improvements are seen.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901

---
 sound/pci/hda/hda_codec.c  | 8 ++++++--
 sound/pci/hda/hda_codec.h  | 2 ++
 sound/pci/hda/patch_hdmi.c | 6 +++++-
 3 files changed, 13 insertions(+), 3 deletions(-)
sound/pci/hda/hda_codec.c +6 -2
index a6233775e779f..82b0dc9f528f0 100644
@@ -2947,15 +2947,19 @@ static int hda_codec_runtime_resume(struct device *dev)
 #ifdef CONFIG_PM_SLEEP
 static int hda_codec_force_resume(struct device *dev)
 {
+	struct hda_codec *codec = dev_to_hda_codec(dev);
+	bool forced_resume = !codec->relaxed_resume;
 	int ret;
 
 	/* The get/put pair below enforces the runtime resume even if the
 	 * device hasn't been used at suspend time.  This trick is needed to
 	 * update the jack state change during the sleep.
 	 */
-	pm_runtime_get_noresume(dev);
+	if (forced_resume)
+		pm_runtime_get_noresume(dev);
 	ret = pm_runtime_force_resume(dev);
-	pm_runtime_put(dev);
+	if (forced_resume)
+		pm_runtime_put(dev);
 	return ret;
 }
 
sound/pci/hda/hda_codec.h +2 -0
index acacc19002658..2003403ce1c82 100644
@@ -261,6 +261,8 @@ struct hda_codec {
 	unsigned int auto_runtime_pm:1; /* enable automatic codec runtime pm */
 	unsigned int force_pin_prefix:1; /* Add location prefix */
 	unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
+	unsigned int relaxed_resume:1;	/* don't resume forcibly for jack */
+
 #ifdef CONFIG_PM
 	unsigned long power_on_acct;
 	unsigned long power_off_acct;
sound/pci/hda/patch_hdmi.c +5 -1
index 35931a18418f3..e4fbfb5557ab7 100644
@@ -2293,8 +2293,10 @@ static void generic_hdmi_free(struct hda_codec *codec)
 	struct hdmi_spec *spec = codec->spec;
 	int pin_idx, pcm_idx;
 
-	if (codec_has_acomp(codec))
+	if (codec_has_acomp(codec)) {
 		snd_hdac_acomp_register_notifier(&codec->bus->core, NULL);
+		codec->relaxed_resume = 0;
+	}
 
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
 		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
@@ -2550,6 +2552,8 @@ static void register_i915_notifier(struct hda_codec *codec)
 	spec->drm_audio_ops.pin_eld_notify = intel_pin_eld_notify;
 	snd_hdac_acomp_register_notifier(&codec->bus->core,
 					&spec->drm_audio_ops);
+	/* no need for forcible resume for jack check thanks to notifier */
+	codec->relaxed_resume = 1;
 }
 
 /* setup_stream ops override for HSW+ */
Signature · 1 line
2.20.1
author maintainer
#157 lore raw

PATCH 133/167 KVM: VMX: Always signal #GP on WRMSR to MSR_IA32_CR_PAT with bad value

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit d28f4290b53a157191ed9991ad05dffe9e8c0c89 ]

The behavior of WRMSR is in no way dependent on whether or not KVM consumes the value.

Fixes 4566654bb9be9 ("KVM: vmx: Inject #GP on invalid PAT CR")
Cc Nadav Amit <[email protected]>
---
 arch/x86/kvm/vmx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/x86/kvm/vmx.c +3 -2
index feff7ed44a2bb..e4bba840a0708 100644
@@ -4265,9 +4265,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 					      MSR_TYPE_W);
 		break;
 	case MSR_IA32_CR_PAT:
+		if (!kvm_pat_valid(data))
+			return 1;
+
 		if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
-			if (!kvm_pat_valid(data))
-				return 1;
 			vmcs_write64(GUEST_IA32_PAT, data);
 			vcpu->arch.pat = data;
 			break;
Signature · 1 line
2.20.1
author maintainer
#138 lore raw

PATCH 123/167 apparmor: reset pos on failure to unpack for various functions

In reply to Sasha Levin

From: Mike Salvatore <[email protected]>

[ Upstream commit 156e42996bd84eccb6acf319f19ce0cb140d00e3 ]

Each function that manipulates the aa_ext struct should reset it's "pos" member on failure. This ensures that, on failure, no changes are made to the state of the aa_ext struct.

There are paths were elements are optional and the error path is used to indicate the optional element is not present. This means instead of just aborting on error the unpack stream can become unsynchronized on optional elements, if using one of the affected functions.

Fixes 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
---
 security/apparmor/policy_unpack.c | 40 +++++++++++++++++++++++++------
 1 file changed, 33 insertions(+), 7 deletions(-)
security/apparmor/policy_unpack.c +33 -7
index 088ea2ac85706..612f737cee836 100644
@@ -223,16 +223,21 @@ static void *kvmemdup(const void *src, size_t len)
 static size_t unpack_u16_chunk(struct aa_ext *e, char **chunk)
 {
 	size_t size = 0;
+	void *pos = e->pos;
 
 	if (!inbounds(e, sizeof(u16)))
-		return 0;
+		goto fail;
 	size = le16_to_cpu(get_unaligned((__le16 *) e->pos));
 	e->pos += sizeof(__le16);
 	if (!inbounds(e, size))
-		return 0;
+		goto fail;
 	*chunk = e->pos;
 	e->pos += size;
 	return size;
+
+fail:
+	e->pos = pos;
+	return 0;
 }
 
 /* unpack control byte */
@@ -294,49 +299,66 @@ static bool unpack_nameX(struct aa_ext *e, enum aa_code code, const char *name)
 
 static bool unpack_u32(struct aa_ext *e, u32 *data, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_U32, name)) {
 		if (!inbounds(e, sizeof(u32)))
-			return 0;
+			goto fail;
 		if (data)
 			*data = le32_to_cpu(get_unaligned((__le32 *) e->pos));
 		e->pos += sizeof(u32);
 		return 1;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static bool unpack_u64(struct aa_ext *e, u64 *data, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_U64, name)) {
 		if (!inbounds(e, sizeof(u64)))
-			return 0;
+			goto fail;
 		if (data)
 			*data = le64_to_cpu(get_unaligned((__le64 *) e->pos));
 		e->pos += sizeof(u64);
 		return 1;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static size_t unpack_array(struct aa_ext *e, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_ARRAY, name)) {
 		int size;
 		if (!inbounds(e, sizeof(u16)))
-			return 0;
+			goto fail;
 		size = (int)le16_to_cpu(get_unaligned((__le16 *) e->pos));
 		e->pos += sizeof(u16);
 		return size;
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
 static size_t unpack_blob(struct aa_ext *e, char **blob, const char *name)
 {
+	void *pos = e->pos;
+
 	if (unpack_nameX(e, AA_BLOB, name)) {
 		u32 size;
 		if (!inbounds(e, sizeof(u32)))
-			return 0;
+			goto fail;
 		size = le32_to_cpu(get_unaligned((__le32 *) e->pos));
 		e->pos += sizeof(u32);
 		if (inbounds(e, (size_t) size)) {
@@ -345,6 +367,9 @@ static size_t unpack_blob(struct aa_ext *e, char **blob, const char *name)
 			return size;
 		}
 	}
+
+fail:
+	e->pos = pos;
 	return 0;
 }
 
@@ -361,9 +386,10 @@ static int unpack_str(struct aa_ext *e, const char **string, const char *name)
 			if (src_str[size - 1] != 0)
 				goto fail;
 			*string = src_str;
+
+			return size;
 		}
 	}
-	return size;
 
 fail:
 	e->pos = pos;
Signature · 1 line
2.20.1
author maintainer
#153 lore raw

PATCH 129/167 cifs: Properly handle auto disabling of serverino option

In reply to Sasha Levin

From: "Paulo Alcantara (SUSE)" <[email protected]>

[ Upstream commit 29fbeb7a908a60a5ae8c50fbe171cb8fdcef1980 ]

Fix mount options comparison when serverino option is turned off later in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs mounts.

---
 fs/cifs/cifs_fs_sb.h | 5 +++++
 fs/cifs/connect.c    | 8 ++++++--
 fs/cifs/misc.c       | 1 +
 3 files changed, 12 insertions(+), 2 deletions(-)
fs/cifs/cifs_fs_sb.h +5 -0
index 9731d0d891e7e..aba2b48d4da1a 100644
@@ -72,5 +72,10 @@ struct cifs_sb_info {
 	struct delayed_work prune_tlinks;
 	struct rcu_head rcu;
 	char *prepath;
+	/*
+	 * Indicate whether serverino option was turned off later
+	 * (cifs_autodisable_serverino) in order to match new mounts.
+	 */
+	bool mnt_cifs_serverino_autodisabled;
 };
 #endif				/* _CIFS_FS_SB_H */
fs/cifs/connect.c +6 -2
index c53a2e86ed544..208430bb66fc6 100644
@@ -3247,12 +3247,16 @@ compare_mount_options(struct super_block *sb, struct cifs_mnt_data *mnt_data)
 {
 	struct cifs_sb_info *old = CIFS_SB(sb);
 	struct cifs_sb_info *new = mnt_data->cifs_sb;
+	unsigned int oldflags = old->mnt_cifs_flags & CIFS_MOUNT_MASK;
+	unsigned int newflags = new->mnt_cifs_flags & CIFS_MOUNT_MASK;
 
 	if ((sb->s_flags & CIFS_MS_MASK) != (mnt_data->flags & CIFS_MS_MASK))
 		return 0;
 
-	if ((old->mnt_cifs_flags & CIFS_MOUNT_MASK) !=
-	    (new->mnt_cifs_flags & CIFS_MOUNT_MASK))
+	if (old->mnt_cifs_serverino_autodisabled)
+		newflags &= ~CIFS_MOUNT_SERVER_INUM;
+
+	if (oldflags != newflags)
 		return 0;
 
 	/*
fs/cifs/misc.c +1 -0
index facc94e159a16..e45f8e321371c 100644
@@ -523,6 +523,7 @@ cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb)
 {
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
 		cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
+		cifs_sb->mnt_cifs_serverino_autodisabled = true;
 		cifs_dbg(VFS, "Autodisabling the use of server inode numbers on %s. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the \"noserverino\" option to silence this message.\n",
 			 cifs_sb_master_tcon(cifs_sb)->treeName);
 	}
Signature · 1 line
2.20.1
author maintainer
#151 lore raw

PATCH 127/167 staging: wilc1000: fix error path cleanup in wilc_wlan_initialize()

In reply to Sasha Levin

From: Ajay Singh <[email protected]>

[ Upstream commit 6419f818ababebc1116fb2d0e220bd4fe835d0e3 ]

For the error path in wilc_wlan_initialize(), the resources are not cleanup in the correct order. Reverted the previous changes and use the correct order to free during error condition.

Fixes b46d68825c2d ("staging: wilc1000: remove COMPLEMENT_BOOT")
---
 drivers/staging/wilc1000/linux_wlan.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/staging/wilc1000/linux_wlan.c +6 -6
index 649caae2b6033..25798119426b3 100644
@@ -649,17 +649,17 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 			goto fail_locks;
 		}
 
-		if (wl->gpio_irq && init_irq(dev)) {
-			ret = -EIO;
-			goto fail_locks;
-		}
-
 		ret = wlan_initialize_threads(dev);
 		if (ret < 0) {
 			ret = -EIO;
 			goto fail_wilc_wlan;
 		}
 
+		if (wl->gpio_irq && init_irq(dev)) {
+			ret = -EIO;
+			goto fail_threads;
+		}
+
 		if (!wl->dev_irq_num &&
 		    wl->hif_func->enable_interrupt &&
 		    wl->hif_func->enable_interrupt(wl)) {
@@ -715,7 +715,7 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 fail_irq_init:
 		if (wl->dev_irq_num)
 			deinit_irq(dev);
-
+fail_threads:
 		wlan_deinitialize_threads(dev);
 fail_wilc_wlan:
 		wilc_wlan_cleanup(dev);
Signature · 1 line
2.20.1
author maintainer
#141 lore raw

PATCH 126/167 tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations

In reply to Sasha Levin

From: Vadim Sukhomlinov <[email protected]>

[ Upstream commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 ]

TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling future TPM operations. TPM 1.2 behavior was different, future TPM operations weren't disabled, causing rare issues. This patch ensures that future TPM operations are disabled.

Fixes d1bd4a792d39 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.")
[dianders: resolved merge conflicts with mainline]
---
 drivers/char/tpm/tpm-chip.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/char/tpm/tpm-chip.c +3 -2
index 46caadca916a0..0b01eb7b14e53 100644
@@ -187,12 +187,13 @@ static int tpm_class_shutdown(struct device *dev)
 {
 	struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev);
 
+	down_write(&chip->ops_sem);
 	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
-		down_write(&chip->ops_sem);
 		tpm2_shutdown(chip, TPM2_SU_CLEAR);
 		chip->ops = NULL;
-		up_write(&chip->ops_sem);
 	}
+	chip->ops = NULL;
+	up_write(&chip->ops_sem);
 
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#134 lore raw

PATCH 119/167 cifs: add spinlock for the openFileList to cifsInodeInfo

In reply to Sasha Levin

From: Ronnie Sahlberg <[email protected]>

[ Upstream commit 487317c99477d00f22370625d53be3239febabbe ]

We can not depend on the tcon->open_file_lock here since in multiuser mode we may have the same file/inode open via multiple different tcons.

The current code is race prone and will crash if one user deletes a file at the same time a different user opens/create the file.

To avoid this we need to have a spinlock attached to the inode and not the tcon.

RHBZ: 1580165

---
 fs/cifs/cifsfs.c   | 1 +
 fs/cifs/cifsglob.h | 5 +++++
 fs/cifs/file.c     | 8 ++++++--
 3 files changed, 12 insertions(+), 2 deletions(-)
fs/cifs/cifsfs.c +1 -0
index fb32f3d6925e8..64e3888f30e6d 100644
@@ -292,6 +292,7 @@ cifs_alloc_inode(struct super_block *sb)
 	cifs_inode->uniqueid = 0;
 	cifs_inode->createtime = 0;
 	cifs_inode->epoch = 0;
+	spin_lock_init(&cifs_inode->open_file_lock);
 	generate_random_uuid(cifs_inode->lease_key);
 
 	/*
fs/cifs/cifsglob.h +5 -0
index 0ee0072c1f362..57af9bac0045a 100644
@@ -1287,6 +1287,7 @@ struct cifsInodeInfo {
 	struct rw_semaphore lock_sem;	/* protect the fields above */
 	/* BB add in lists for dirty pages i.e. write caching info for oplock */
 	struct list_head openFileList;
+	spinlock_t	open_file_lock;	/* protects openFileList */
 	__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
 	unsigned int oplock;		/* oplock/lease level we have */
 	unsigned int epoch;		/* used to track lease state changes */
@@ -1687,10 +1688,14 @@ require use of the stronger protocol */
  *  tcp_ses_lock protects:
  *	list operations on tcp and SMB session lists
  *  tcon->open_file_lock protects the list of open files hanging off the tcon
+ *  inode->open_file_lock protects the openFileList hanging off the inode
  *  cfile->file_info_lock protects counters and fields in cifs file struct
  *  f_owner.lock protects certain per file struct operations
  *  mapping->page_lock protects certain per page operations
  *
+ *  Note that the cifs_tcon.open_file_lock should be taken before
+ *  not after the cifsInodeInfo.open_file_lock
+ *
  *  Semaphores
  *  ----------
  *  sesSem     operations on smb session
fs/cifs/file.c +6 -2
index 933013543edab..8703b5f26f452 100644
@@ -336,10 +336,12 @@ cifs_new_fileinfo(struct cifs_fid *fid, struct file *file,
 	list_add(&cfile->tlist, &tcon->openFileList);
 
 	/* if readable file instance put first in list*/
+	spin_lock(&cinode->open_file_lock);
 	if (file->f_mode & FMODE_READ)
 		list_add(&cfile->flist, &cinode->openFileList);
 	else
 		list_add_tail(&cfile->flist, &cinode->openFileList);
+	spin_unlock(&cinode->open_file_lock);
 	spin_unlock(&tcon->open_file_lock);
 
 	if (fid->purge_cache)
@@ -411,7 +413,9 @@ void _cifsFileInfo_put(struct cifsFileInfo *cifs_file, bool wait_oplock_handler)
 	cifs_add_pending_open_locked(&fid, cifs_file->tlink, &open);
 
 	/* remove it from the lists */
+	spin_lock(&cifsi->open_file_lock);
 	list_del(&cifs_file->flist);
+	spin_unlock(&cifsi->open_file_lock);
 	list_del(&cifs_file->tlist);
 
 	if (list_empty(&cifsi->openFileList)) {
@@ -1929,10 +1933,10 @@ struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
 		if (!rc)
 			return inv_file;
 		else {
-			spin_lock(&tcon->open_file_lock);
+			spin_lock(&cifs_inode->open_file_lock);
 			list_move_tail(&inv_file->flist,
 					&cifs_inode->openFileList);
-			spin_unlock(&tcon->open_file_lock);
+			spin_unlock(&cifs_inode->open_file_lock);
 			cifsFileInfo_put(inv_file);
 			++refind;
 			inv_file = NULL;
Signature · 1 line
2.20.1
author maintainer
#122 lore raw

PATCH 110/167 dm crypt: move detailed message into debug level

In reply to Sasha Levin

From: Milan Broz <[email protected]>

[ Upstream commit 7a1cd7238fde6ab367384a4a2998cba48330c398 ]

The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance.

Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device).

---
 drivers/md/dm-crypt.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/md/dm-crypt.c +3 -2
index f3dcc7640319e..34f5de13a93d1 100644
@@ -949,6 +949,7 @@ static int crypt_integrity_ctr(struct crypt_config *cc, struct dm_target *ti)
 {
 #ifdef CONFIG_BLK_DEV_INTEGRITY
 	struct blk_integrity *bi = blk_get_integrity(cc->dev->bdev->bd_disk);
+	struct mapped_device *md = dm_table_get_md(ti->table);
 
 	/* From now we require underlying device with our integrity profile */
 	if (!bi || strcasecmp(bi->profile->name, "DM-DIF-EXT-TAG")) {
@@ -968,7 +969,7 @@ static int crypt_integrity_ctr(struct crypt_config *cc, struct dm_target *ti)
 
 	if (crypt_integrity_aead(cc)) {
 		cc->integrity_tag_size = cc->on_disk_tag_size - cc->integrity_iv_size;
-		DMINFO("Integrity AEAD, tag size %u, IV size %u.",
+		DMDEBUG("%s: Integrity AEAD, tag size %u, IV size %u.", dm_device_name(md),
 		       cc->integrity_tag_size, cc->integrity_iv_size);
 
 		if (crypto_aead_setauthsize(any_tfm_aead(cc), cc->integrity_tag_size)) {
@@ -976,7 +977,7 @@ static int crypt_integrity_ctr(struct crypt_config *cc, struct dm_target *ti)
 			return -EINVAL;
 		}
 	} else if (cc->integrity_iv_size)
-		DMINFO("Additional per-sector space %u bytes for IV.",
+		DMDEBUG("%s: Additional per-sector space %u bytes for IV.", dm_device_name(md),
 		       cc->integrity_iv_size);
 
 	if ((cc->integrity_tag_size + cc->integrity_iv_size) != bi->tag_size) {
Signature · 1 line
2.20.1
author maintainer
#117 lore raw

PATCH 105/167 dm mpath: fix missing call of path selector type->end_io

In reply to Sasha Levin

From: Yufen Yu <[email protected]>

[ Upstream commit 5de719e3d01b4abe0de0d7b857148a880ff2a90b ]

After commit 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback"), map_request() will requeue the tio when issued clone request return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE.

Thus, if device driver status is error, a tio may be requeued multiple times until the return value is not DM_MAPIO_REQUEUE. That means type->start_io may be called multiple times, while type->end_io is only called when IO complete.

In fact, even without commit 396eaf21ee17, setup_clone() failure can also cause tio requeue and associated missed call to type->end_io.

The service-time path selector selects path based on in_flight_size, which is increased by st_start_io() and decreased by st_end_io(). Missed calls to st_end_io() can lead to in_flight_size count error and will cause the selector to make the wrong choice. In addition, queue-length path selector will also be affected.

To fix the problem, call type->end_io in ->release_clone_rq before tio requeue. map_info is passed to ->release_clone_rq() for map_request() error path that result in requeue.

Fixes 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
---
 drivers/md/dm-mpath.c         | 17 ++++++++++++++++-
 drivers/md/dm-rq.c            |  8 ++++----
 drivers/md/dm-target.c        |  3 ++-
 include/linux/device-mapper.h |  3 ++-
 4 files changed, 24 insertions(+), 7 deletions(-)
drivers/md/dm-mpath.c +16 -1
index baa966e2778c0..481e54ded9dc7 100644
@@ -554,8 +554,23 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq,
 	return DM_MAPIO_REMAPPED;
 }
 
-static void multipath_release_clone(struct request *clone)
+static void multipath_release_clone(struct request *clone,
+				    union map_info *map_context)
 {
+	if (unlikely(map_context)) {
+		/*
+		 * non-NULL map_context means caller is still map
+		 * method; must undo multipath_clone_and_map()
+		 */
+		struct dm_mpath_io *mpio = get_mpio(map_context);
+		struct pgpath *pgpath = mpio->pgpath;
+
+		if (pgpath && pgpath->pg->ps.type->end_io)
+			pgpath->pg->ps.type->end_io(&pgpath->pg->ps,
+						    &pgpath->path,
+						    mpio->nr_bytes);
+	}
+
 	blk_put_request(clone);
 }
 
drivers/md/dm-rq.c +4 -4
index 264b84e274aac..17c6a73c536c6 100644
@@ -219,7 +219,7 @@ static void dm_end_request(struct request *clone, blk_status_t error)
 	struct request *rq = tio->orig;
 
 	blk_rq_unprep_clone(clone);
-	tio->ti->type->release_clone_rq(clone);
+	tio->ti->type->release_clone_rq(clone, NULL);
 
 	rq_end_stats(md, rq);
 	if (!rq->q->mq_ops)
@@ -270,7 +270,7 @@ static void dm_requeue_original_request(struct dm_rq_target_io *tio, bool delay_
 	rq_end_stats(md, rq);
 	if (tio->clone) {
 		blk_rq_unprep_clone(tio->clone);
-		tio->ti->type->release_clone_rq(tio->clone);
+		tio->ti->type->release_clone_rq(tio->clone, NULL);
 	}
 
 	if (!rq->q->mq_ops)
@@ -495,7 +495,7 @@ static int map_request(struct dm_rq_target_io *tio)
 	case DM_MAPIO_REMAPPED:
 		if (setup_clone(clone, rq, tio, GFP_ATOMIC)) {
 			/* -ENOMEM */
-			ti->type->release_clone_rq(clone);
+			ti->type->release_clone_rq(clone, &tio->info);
 			return DM_MAPIO_REQUEUE;
 		}
 
@@ -505,7 +505,7 @@ static int map_request(struct dm_rq_target_io *tio)
 		ret = dm_dispatch_clone_request(clone, rq);
 		if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE) {
 			blk_rq_unprep_clone(clone);
-			tio->ti->type->release_clone_rq(clone);
+			tio->ti->type->release_clone_rq(clone, &tio->info);
 			tio->clone = NULL;
 			if (!rq->q->mq_ops)
 				r = DM_MAPIO_DELAY_REQUEUE;
drivers/md/dm-target.c +2 -1
index 314d17ca64668..64dd0b34fcf49 100644
@@ -136,7 +136,8 @@ static int io_err_clone_and_map_rq(struct dm_target *ti, struct request *rq,
 	return DM_MAPIO_KILL;
 }
 
-static void io_err_release_clone_rq(struct request *clone)
+static void io_err_release_clone_rq(struct request *clone,
+				    union map_info *map_context)
 {
 }
 
include/linux/device-mapper.h +2 -1
index bef2e36c01b4b..91f9f95ad5066 100644
@@ -62,7 +62,8 @@ typedef int (*dm_clone_and_map_request_fn) (struct dm_target *ti,
 					    struct request *rq,
 					    union map_info *map_context,
 					    struct request **clone);
-typedef void (*dm_release_clone_request_fn) (struct request *clone);
+typedef void (*dm_release_clone_request_fn) (struct request *clone,
+					     union map_info *map_context);
 
 /*
  * Returns:
Signature · 1 line
2.20.1
author maintainer
#167 lore raw

PATCH 143/167 resource: Fix find_next_iomem_res() iteration issue

In reply to Sasha Levin

From: Bjorn Helgaas <[email protected]>

[ Upstream commit 010a93bf97c72f43aac664d0a685942f83d1a103 ]

Previously find_next_iomem_res() used "*res" as both an input parameter for the range to search and the type of resource to search for, and an output parameter for the resource we found, which makes the interface confusing.

The current callers use find_next_iomem_res() incorrectly because they allocate a single struct resource and use it for repeated calls to find_next_iomem_res(). When find_next_iomem_res() returns a resource, it overwrites the start, end, flags, and desc members of the struct. If we call find_next_iomem_res() again, we must update or restore these fields. The previous code restored res.start and res.end, but not res.flags or res.desc.

Since the callers did not restore res.flags, if they searched for flags IORESOURCE_MEM | IORESOURCE_BUSY and found a resource with flags IORESOURCE_MEM | IORESOURCE_BUSY | IORESOURCE_SYSRAM, the next search would incorrectly skip resources unless they were also marked as IORESOURCE_SYSRAM.

Fix this by restructuring the interface so it takes explicit "start, end, flags" parameters and uses "*res" only as an output parameter.

Based on a patch by Lianbo Jiang <[email protected]>.

[ bp: While at it:
- make comments kernel-doc style.
-

---
 kernel/resource.c | 96 +++++++++++++++++++++--------------------------
 1 file changed, 42 insertions(+), 54 deletions(-)
kernel/resource.c +42 -54
index 155ec873ea4d1..38b8d11c9eaf4 100644
@@ -318,24 +318,27 @@ int release_resource(struct resource *old)
 
 EXPORT_SYMBOL(release_resource);
 
-/*
- * Finds the lowest iomem resource existing within [res->start..res->end].
- * The caller must specify res->start, res->end, res->flags, and optionally
- * desc.  If found, returns 0, res is overwritten, if not found, returns -1.
- * This function walks the whole tree and not just first level children until
- * and unless first_level_children_only is true.
+/**
+ * Finds the lowest iomem resource that covers part of [start..end].  The
+ * caller must specify start, end, flags, and desc (which may be
+ * IORES_DESC_NONE).
+ *
+ * If a resource is found, returns 0 and *res is overwritten with the part
+ * of the resource that's within [start..end]; if none is found, returns
+ * -1.
+ *
+ * This function walks the whole tree and not just first level children
+ * unless @first_level_children_only is true.
  */
-static int find_next_iomem_res(struct resource *res, unsigned long desc,
-			       bool first_level_children_only)
+static int find_next_iomem_res(resource_size_t start, resource_size_t end,
+			       unsigned long flags, unsigned long desc,
+			       bool first_level_children_only,
+			       struct resource *res)
 {
-	resource_size_t start, end;
 	struct resource *p;
 	bool sibling_only = false;
 
 	BUG_ON(!res);
-
-	start = res->start;
-	end = res->end;
 	BUG_ON(start >= end);
 
 	if (first_level_children_only)
@@ -344,7 +347,7 @@ static int find_next_iomem_res(struct resource *res, unsigned long desc,
 	read_lock(&resource_lock);
 
 	for (p = iomem_resource.child; p; p = next_resource(p, sibling_only)) {
-		if ((p->flags & res->flags) != res->flags)
+		if ((p->flags & flags) != flags)
 			continue;
 		if ((desc != IORES_DESC_NONE) && (desc != p->desc))
 			continue;
@@ -359,32 +362,31 @@ static int find_next_iomem_res(struct resource *res, unsigned long desc,
 	read_unlock(&resource_lock);
 	if (!p)
 		return -1;
+
 	/* copy data */
-	if (res->start < p->start)
-		res->start = p->start;
-	if (res->end > p->end)
-		res->end = p->end;
+	res->start = max(start, p->start);
+	res->end = min(end, p->end);
 	res->flags = p->flags;
 	res->desc = p->desc;
 	return 0;
 }
 
-static int __walk_iomem_res_desc(struct resource *res, unsigned long desc,
-				 bool first_level_children_only,
-				 void *arg,
+static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end,
+				 unsigned long flags, unsigned long desc,
+				 bool first_level_children_only, void *arg,
 				 int (*func)(struct resource *, void *))
 {
-	u64 orig_end = res->end;
+	struct resource res;
 	int ret = -1;
 
-	while ((res->start < res->end) &&
-	       !find_next_iomem_res(res, desc, first_level_children_only)) {
-		ret = (*func)(res, arg);
+	while (start < end &&
+	       !find_next_iomem_res(start, end, flags, desc,
+				    first_level_children_only, &res)) {
+		ret = (*func)(&res, arg);
 		if (ret)
 			break;
 
-		res->start = res->end + 1;
-		res->end = orig_end;
+		start = res.end + 1;
 	}
 
 	return ret;
@@ -407,13 +409,7 @@ static int __walk_iomem_res_desc(struct resource *res, unsigned long desc,
 int walk_iomem_res_desc(unsigned long desc, unsigned long flags, u64 start,
 		u64 end, void *arg, int (*func)(struct resource *, void *))
 {
-	struct resource res;
-
-	res.start = start;
-	res.end = end;
-	res.flags = flags;
-
-	return __walk_iomem_res_desc(&res, desc, false, arg, func);
+	return __walk_iomem_res_desc(start, end, flags, desc, false, arg, func);
 }
 EXPORT_SYMBOL_GPL(walk_iomem_res_desc);
 
@@ -427,13 +423,9 @@ EXPORT_SYMBOL_GPL(walk_iomem_res_desc);
 int walk_system_ram_res(u64 start, u64 end, void *arg,
 				int (*func)(struct resource *, void *))
 {
-	struct resource res;
+	unsigned long flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
-	res.start = start;
-	res.end = end;
-	res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
-	return __walk_iomem_res_desc(&res, IORES_DESC_NONE, true,
+	return __walk_iomem_res_desc(start, end, flags, IORES_DESC_NONE, true,
 				     arg, func);
 }
 
@@ -444,13 +436,9 @@ int walk_system_ram_res(u64 start, u64 end, void *arg,
 int walk_mem_res(u64 start, u64 end, void *arg,
 		 int (*func)(struct resource *, void *))
 {
-	struct resource res;
+	unsigned long flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 
-	res.start = start;
-	res.end = end;
-	res.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-
-	return __walk_iomem_res_desc(&res, IORES_DESC_NONE, true,
+	return __walk_iomem_res_desc(start, end, flags, IORES_DESC_NONE, true,
 				     arg, func);
 }
 
@@ -464,25 +452,25 @@ int walk_mem_res(u64 start, u64 end, void *arg,
 int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
+	resource_size_t start, end;
+	unsigned long flags;
 	struct resource res;
 	unsigned long pfn, end_pfn;
-	u64 orig_end;
 	int ret = -1;
 
-	res.start = (u64) start_pfn << PAGE_SHIFT;
-	res.end = ((u64)(start_pfn + nr_pages) << PAGE_SHIFT) - 1;
-	res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-	orig_end = res.end;
-	while ((res.start < res.end) &&
-		(find_next_iomem_res(&res, IORES_DESC_NONE, true) >= 0)) {
+	start = (u64) start_pfn << PAGE_SHIFT;
+	end = ((u64)(start_pfn + nr_pages) << PAGE_SHIFT) - 1;
+	flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
+	while (start < end &&
+	       !find_next_iomem_res(start, end, flags, IORES_DESC_NONE,
+				    true, &res)) {
 		pfn = (res.start + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		end_pfn = (res.end + 1) >> PAGE_SHIFT;
 		if (end_pfn > pfn)
 			ret = (*func)(pfn, end_pfn - pfn, arg);
 		if (ret)
 			break;
-		res.start = res.end + 1;
-		res.end = orig_end;
+		start = res.end + 1;
 	}
 	return ret;
 }
Signature · 7 lines
2.20.1


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
author maintainer
#168 lore raw

PATCH 144/167 resource: fix locking in find_next_iomem_res()

In reply to Sasha Levin

From: Nadav Amit <[email protected]>

[ Upstream commit 49f17c26c123b60fd1c74629eef077740d16ffc2 ]

Since resources can be removed, locking should ensure that the resource is not removed while accessing it. However, find_next_iomem_res() does not hold the lock while copying the data of the resource.

Keep holding the lock while the data is copied. While at it, change the return value to a more informative value. It is disregarded by the callers.

[[email protected]: fix find_next_iomem_res() documentation]
Fixes ff3cc952d3f00 ("resource: Add remove_resource interface")
Cc Borislav Petkov <[email protected]>
Cc Toshi Kani <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Bjorn Helgaas <[email protected]>
Cc Ingo Molnar <[email protected]>
---
 kernel/resource.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
kernel/resource.c +10 -10
index 38b8d11c9eaf4..bce773cc5e416 100644
@@ -325,7 +325,7 @@ EXPORT_SYMBOL(release_resource);
  *
  * If a resource is found, returns 0 and *res is overwritten with the part
  * of the resource that's within [start..end]; if none is found, returns
- * -1.
+ * -ENODEV.  Returns -EINVAL for invalid parameters.
  *
  * This function walks the whole tree and not just first level children
  * unless @first_level_children_only is true.
@@ -359,16 +359,16 @@ static int find_next_iomem_res(resource_size_t start, resource_size_t end,
 			break;
 	}
 
+	if (p) {
+		/* copy data */
+		res->start = max(start, p->start);
+		res->end = min(end, p->end);
+		res->flags = p->flags;
+		res->desc = p->desc;
+	}
+
 	read_unlock(&resource_lock);
-	if (!p)
-		return -1;
-
-	/* copy data */
-	res->start = max(start, p->start);
-	res->end = min(end, p->end);
-	res->flags = p->flags;
-	res->desc = p->desc;
-	return 0;
+	return p ? 0 : -ENODEV;
 }
 
 static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end,
Signature · 1 line
2.20.1
author maintainer
#169 lore raw

PATCH 145/167 pstore: Fix double-free in pstore_mkfile() failure path

In reply to Sasha Levin

From: Norbert Manthey <[email protected]>

[ Upstream commit 4c6d80e1144bdf48cae6b602ae30d41f3e5c76a9 ]

The pstore_mkfile() function is passed a pointer to a struct pstore_record. On success it consumes this 'record' pointer and references it from the created inode.

On failure, however, it may or may not free the record. There are even two different code paths which return -ENOMEM -- one of which does and the other doesn't free the record.

Make the behaviour deterministic by never consuming and freeing the record when returning failure, allowing the caller to do the cleanup consistently.

Fixes 83f70f0769ddd ("pstore: Do not duplicate record metadata")
Fixes 1dfff7dd67d1a ("pstore: Pass record contents instead of copying")
[kees: also move "private" allocation location, rename inode cleanup label]
---
 fs/pstore/inode.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
fs/pstore/inode.c +6 -6
index 8cf2218b46a75..6f90d91a8733a 100644
@@ -330,10 +330,6 @@ int pstore_mkfile(struct dentry *root, struct pstore_record *record)
 		goto fail;
 	inode->i_mode = S_IFREG | 0444;
 	inode->i_fop = &pstore_file_operations;
-	private = kzalloc(sizeof(*private), GFP_KERNEL);
-	if (!private)
-		goto fail_alloc;
-	private->record = record;
 
 	switch (record->type) {
 	case PSTORE_TYPE_DMESG:
@@ -383,12 +379,16 @@ int pstore_mkfile(struct dentry *root, struct pstore_record *record)
 		break;
 	}
 
+	private = kzalloc(sizeof(*private), GFP_KERNEL);
+	if (!private)
+		goto fail_inode;
+
 	dentry = d_alloc_name(root, name);
 	if (!dentry)
 		goto fail_private;
 
+	private->record = record;
 	inode->i_size = private->total_size = size;
-
 	inode->i_private = private;
 
 	if (record->time.tv_sec)
@@ -404,7 +404,7 @@ int pstore_mkfile(struct dentry *root, struct pstore_record *record)
 
 fail_private:
 	free_pstore_private(private);
-fail_alloc:
+fail_inode:
 	iput(inode);
 
 fail:
Signature · 1 line
2.20.1
author maintainer
#177 lore raw

PATCH 150/167 iommu/iova: Remove stale cached32_node

In reply to Sasha Levin

From: Chris Wilson <[email protected]>

[ Upstream commit 9eed17d37c77171cf5ffb95c4257f87df3cd4c8f ]

Since the cached32_node is allowed to be advanced above dma_32bit_pfn (to provide a shortcut into the limited range), we need to be careful to remove the to be freed node if it is the cached32_node.

[   48.477773] BUG: KASAN: use-after-free in __cached_rbnode_delete_update+0x68/0x110
[   48.477812] Read of size 8 at addr ffff88870fc19020 by task kworker/u8:1/37
[   48.477843]
[   48.477879] CPU: 1 PID: 37 Comm: kworker/u8:1 Tainted: G     U            5.2.0+ #735
[   48.477915] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[   48.478047] Workqueue: i915 __i915_gem_free_work [i915]
[   48.478075] Call Trace:
[   48.478111]  dump_stack+0x5b/0x90
[   48.478137]  print_address_description+0x67/0x237
[   48.478178]  ? __cached_rbnode_delete_update+0x68/0x110
[   48.478212]  __kasan_report.cold.3+0x1c/0x38
[   48.478240]  ? __cached_rbnode_delete_update+0x68/0x110
[   48.478280]  ? __cached_rbnode_delete_update+0x68/0x110
[   48.478308]  __cached_rbnode_delete_update+0x68/0x110
[   48.478344]  private_free_iova+0x2b/0x60
[   48.478378]  iova_magazine_free_pfns+0x46/0xa0
[   48.478403]  free_iova_fast+0x277/0x340
[   48.478443]  fq_ring_free+0x15a/0x1a0
[   48.478473]  queue_iova+0x19c/0x1f0
[   48.478597]  cleanup_page_dma.isra.64+0x62/0xb0 [i915]
[   48.478712]  __gen8_ppgtt_cleanup+0x63/0x80 [i915]
[   48.478826]  __gen8_ppgtt_cleanup+0x42/0x80 [i915]
[   48.478940]  __gen8_ppgtt_clear+0x433/0x4b0 [i915]
[   48.479053]  __gen8_ppgtt_clear+0x462/0x4b0 [i915]
[   48.479081]  ? __sg_free_table+0x9e/0xf0
[   48.479116]  ? kfree+0x7f/0x150
[   48.479234]  i915_vma_unbind+0x1e2/0x240 [i915]
[   48.479352]  i915_vma_destroy+0x3a/0x280 [i915]
[   48.479465]  __i915_gem_free_objects+0xf0/0x2d0 [i915]
[   48.479579]  __i915_gem_free_work+0x41/0xa0 [i915]
[   48.479607]  process_one_work+0x495/0x710
[   48.479642]  worker_thread+0x4c7/0x6f0
[   48.479687]  ? process_one_work+0x710/0x710
[   48.479724]  kthread+0x1b2/0x1d0
[   48.479774]  ? kthread_create_worker_on_cpu+0xa0/0xa0
[   48.479820]  ret_from_fork+0x1f/0x30
[   48.479864]
[   48.479907] Allocated by task 631:
[   48.479944]  save_stack+0x19/0x80
[   48.479994]  __kasan_kmalloc.constprop.6+0xc1/0xd0
[   48.480038]  kmem_cache_alloc+0x91/0xf0
[   48.480082]  alloc_iova+0x2b/0x1e0
[   48.480125]  alloc_iova_fast+0x58/0x376
[   48.480166]  intel_alloc_iova+0x90/0xc0
[   48.480214]  intel_map_sg+0xde/0x1f0
[   48.480343]  i915_gem_gtt_prepare_pages+0xb8/0x170 [i915]
[   48.480465]  huge_get_pages+0x232/0x2b0 [i915]
[   48.480590]  ____i915_gem_object_get_pages+0x40/0xb0 [i915]
[   48.480712]  __i915_gem_object_get_pages+0x90/0xa0 [i915]
[   48.480834]  i915_gem_object_prepare_write+0x2d6/0x330 [i915]
[   48.480955]  create_test_object.isra.54+0x1a9/0x3e0 [i915]
[   48.481075]  igt_shared_ctx_exec+0x365/0x3c0 [i915]
[   48.481210]  __i915_subtests.cold.4+0x30/0x92 [i915]
[   48.481341]  __run_selftests.cold.3+0xa9/0x119 [i915]
[   48.481466]  i915_live_selftests+0x3c/0x70 [i915]
[   48.481583]  i915_pci_probe+0xe7/0x220 [i915]
[   48.481620]  pci_device_probe+0xe0/0x180
[   48.481665]  really_probe+0x163/0x4e0
[   48.481710]  device_driver_attach+0x85/0x90
[   48.481750]  __driver_attach+0xa5/0x180
[   48.481796]  bus_for_each_dev+0xda/0x130
[   48.481831]  bus_add_driver+0x205/0x2e0
[   48.481882]  driver_register+0xca/0x140
[   48.481927]  do_one_initcall+0x6c/0x1af
[   48.481970]  do_init_module+0x106/0x350
[   48.482010]  load_module+0x3d2c/0x3ea0
[   48.482058]  __do_sys_finit_module+0x110/0x180
[   48.482102]  do_syscall_64+0x62/0x1f0
[   48.482147]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   48.482190]
[   48.482224] Freed by task 37:
[   48.482273]  save_stack+0x19/0x80
[   48.482318]  __kasan_slab_free+0x12e/0x180
[   48.482363]  kmem_cache_free+0x70/0x140
[   48.482406]  __free_iova+0x1d/0x30
[   48.482445]  fq_ring_free+0x15a/0x1a0
[   48.482490]  queue_iova+0x19c/0x1f0
[   48.482624]  cleanup_page_dma.isra.64+0x62/0xb0 [i915]
[   48.482749]  __gen8_ppgtt_cleanup+0x63/0x80 [i915]
[   48.482873]  __gen8_ppgtt_cleanup+0x42/0x80 [i915]
[   48.482999]  __gen8_ppgtt_clear+0x433/0x4b0 [i915]
[   48.483123]  __gen8_ppgtt_clear+0x462/0x4b0 [i915]
[   48.483250]  i915_vma_unbind+0x1e2/0x240 [i915]
[   48.483378]  i915_vma_destroy+0x3a/0x280 [i915]
[   48.483500]  __i915_gem_free_objects+0xf0/0x2d0 [i915]
[   48.483622]  __i915_gem_free_work+0x41/0xa0 [i915]
[   48.483659]  process_one_work+0x495/0x710
[   48.483704]  worker_thread+0x4c7/0x6f0
[   48.483748]  kthread+0x1b2/0x1d0
[   48.483787]  ret_from_fork+0x1f/0x30
[   48.483831]
[   48.483868] The buggy address belongs to the object at ffff88870fc19000
[   48.483868]  which belongs to the cache iommu_iova of size 40
[   48.483920] The buggy address is located 32 bytes inside of
[   48.483920]  40-byte region [ffff88870fc19000, ffff88870fc19028)
[   48.483964] The buggy address belongs to the page:
[   48.484006] page:ffffea001c3f0600 refcount:1 mapcount:0 mapping:ffff8888181a91c0 index:0x0 compound_mapcount: 0
[   48.484045] flags: 0x8000000000010200(slab|head)
[   48.484096] raw: 8000000000010200 ffffea001c421a08 ffffea001c447e88 ffff8888181a91c0
[   48.484141] raw: 0000000000000000 0000000000120012 00000001ffffffff 0000000000000000
[   48.484188] page dumped because: kasan: bad access detected
[   48.484230]
[   48.484265] Memory state around the buggy address:
[   48.484314]  ffff88870fc18f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   48.484361]  ffff88870fc18f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   48.484406] >ffff88870fc19000: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
[   48.484451]                                ^
[   48.484494]  ffff88870fc19080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   48.484530]  ffff88870fc19100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108602

Fixes e60aa7b53845 ("iommu/iova: Extend rbtree node caching")
Cc Robin Murphy <[email protected]>
Cc Joerg Roedel <[email protected]>
Cc Joerg Roedel <[email protected]>
Cc <[email protected]> # v4.15+
---
 drivers/iommu/iova.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/iommu/iova.c +3 -2
index 60348d707b993..9a576ae837dcb 100644
@@ -148,8 +148,9 @@ __cached_rbnode_delete_update(struct iova_domain *iovad, struct iova *free)
 	struct iova *cached_iova;
 
 	cached_iova = rb_entry(iovad->cached32_node, struct iova, node);
-	if (free->pfn_hi < iovad->dma_32bit_pfn &&
-	    free->pfn_lo >= cached_iova->pfn_lo)
+	if (free == cached_iova ||
+	    (free->pfn_hi < iovad->dma_32bit_pfn &&
+	     free->pfn_lo >= cached_iova->pfn_lo))
 		iovad->cached32_node = rb_next(&free->node);
 
 	cached_iova = rb_entry(iovad->cached_node, struct iova, node);
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#176 lore raw

PATCH 149/167 powerpc/mm: Limit rma_size to 1TB when running without HV mode

In reply to Sasha Levin

From: Suraj Jitindar Singh <[email protected]>

[ Upstream commit da0ef93310e67ae6902efded60b6724dab27a5d1 ]

The virtual real mode addressing (VRMA) mechanism is used when a partition is using HPT (Hash Page Table) translation and performs real mode accesses (MSR[IR|DR] = 0) in non-hypervisor mode. In this mode effective address bits 0:23 are treated as zero (i.e. the access is aliased to 0) and the access is performed using an implicit 1TB SLB entry.

The size of the RMA (Real Memory Area) is communicated to the guest as the size of the first memory region in the device tree. And because of the mechanism described above can be expected to not exceed 1TB. In the event that the host erroneously represents the RMA as being larger than 1TB, guest accesses in real mode to memory addresses above 1TB will be aliased down to below 1TB. This means that a memory access performed in real mode may differ to one performed in virtual mode for the same memory address, which would likely have unintended consequences.

To avoid this outcome have the guest explicitly limit the size of the RMA to the current maximum, which is 1TB. This means that even if the first memory block is larger than 1TB, only the first 1TB should be accessed in real mode.

---
 arch/powerpc/mm/hash_utils_64.c | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/powerpc/mm/hash_utils_64.c +9 -0
index f23a89d8e4ce6..29fd8940867e5 100644
@@ -1859,11 +1859,20 @@ void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	 *
 	 * For guests on platforms before POWER9, we clamp the it limit to 1G
 	 * to avoid some funky things such as RTAS bugs etc...
+	 *
+	 * On POWER9 we limit to 1TB in case the host erroneously told us that
+	 * the RMA was >1TB. Effective address bits 0:23 are treated as zero
+	 * (meaning the access is aliased to zero i.e. addr = addr % 1TB)
+	 * for virtual real mode addressing and so it doesn't make sense to
+	 * have an area larger than 1TB as it can't be addressed.
 	 */
 	if (!early_cpu_has_feature(CPU_FTR_HVMODE)) {
 		ppc64_rma_size = first_memblock_size;
 		if (!early_cpu_has_feature(CPU_FTR_ARCH_300))
 			ppc64_rma_size = min_t(u64, ppc64_rma_size, 0x40000000);
+		else
+			ppc64_rma_size = min_t(u64, ppc64_rma_size,
+					       1UL << SID_SHIFT_1T);
 
 		/* Finally limit subsequent allocations */
 		memblock_set_current_limit(ppc64_rma_size);
Signature · 1 line
2.20.1
author maintainer
#181 lore raw

PATCH 154/167 mm/migrate.c: initialize pud_entry in migrate_vma()

In reply to Sasha Levin

From: Ralph Campbell <[email protected]>

[ Upstream commit 7b358c6f12dc82364f6d317f8c8f1d794adbc3f5 ]

When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls migrate_vma_collect() which initializes a struct mm_walk but didn't initialize mm_walk.pud_entry. (Found by code inspection) Use a C structure initialization to make sure it is set to NULL.

Fixes 8763cb45ab967 ("mm/migrate: new memory migration helper for use with device memory")
Cc "Jérôme Glisse" <[email protected]>
Cc Mel Gorman <[email protected]>
---
 mm/migrate.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
mm/migrate.c +7 -10
index b2ea7d1e6f248..0c48191a90368 100644
@@ -2328,16 +2328,13 @@ static int migrate_vma_collect_pmd(pmd_t *pmdp,
  */
 static void migrate_vma_collect(struct migrate_vma *migrate)
 {
-	struct mm_walk mm_walk;
-
-	mm_walk.pmd_entry = migrate_vma_collect_pmd;
-	mm_walk.pte_entry = NULL;
-	mm_walk.pte_hole = migrate_vma_collect_hole;
-	mm_walk.hugetlb_entry = NULL;
-	mm_walk.test_walk = NULL;
-	mm_walk.vma = migrate->vma;
-	mm_walk.mm = migrate->vma->vm_mm;
-	mm_walk.private = migrate;
+	struct mm_walk mm_walk = {
+		.pmd_entry = migrate_vma_collect_pmd,
+		.pte_hole = migrate_vma_collect_hole,
+		.vma = migrate->vma,
+		.mm = migrate->vma->vm_mm,
+		.private = migrate,
+	};
 
 	mmu_notifier_invalidate_range_start(mm_walk.mm,
 					    migrate->start,
Signature · 1 line
2.20.1
author maintainer
#182 lore raw

PATCH 155/167 iio: adc: gyroadc: fix uninitialized return code

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 90c6260c1905a68fb596844087f2223bd4657fee ]

gcc-9 complains about a blatant uninitialized variable use that all earlier compiler versions missed:

drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]

Return -EINVAL instead here and a few lines above it where we accidentally return 0 on failure.

Fixes 059c53b32329 ("iio: adc: Add Renesas GyroADC driver")
---
 drivers/iio/adc/rcar-gyroadc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/adc/rcar-gyroadc.c +2 -2
index dcb50172186f4..f3a966ab35dcb 100644
@@ -391,7 +391,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 				dev_err(dev,
 					"Only %i channels supported with %s, but reg = <%i>.\n",
 					num_channels, child->name, reg);
-				return ret;
+				return -EINVAL;
 			}
 		}
 
@@ -400,7 +400,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 			dev_err(dev,
 				"Channel %i uses different ADC mode than the rest.\n",
 				reg);
-			return ret;
+			return -EINVAL;
 		}
 
 		/* Channel is valid, grab the regulator. */
Signature · 1 line
2.20.1
author maintainer
#190 lore raw

PATCH 163/167 drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit 34ca26a98ad67edd6e4870fe2d4aa047d41a51dd ]

It appears when testing my previous fix for some of the legacy modesetting issues with MST, I misattributed some kernel splats that started appearing on my machine after a rebase as being from upstream. But it appears they actually came from my patch series:

[    2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
[    2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
[    2.980516] ------------[ cut here ]------------
[    2.980519] Could not determine valid watermarks for inherited state
[    2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
[    2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G           O      4.19.0-rc7Lyude-Test+ #1
[    2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
[    2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
[    2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
[    2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
[    2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
[    2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
[    2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
[    2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
[    2.980630] FS:  00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
[    2.980633] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
[    2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.980645] Call Trace:
[    2.980675]  i915_driver_load+0xb0e/0xdc0 [i915]
[    2.980681]  ? kernfs_add_one+0xe7/0x130
[    2.980709]  i915_pci_probe+0x46/0x60 [i915]
[    2.980715]  pci_device_probe+0xd4/0x150
[    2.980719]  really_probe+0x243/0x3b0
[    2.980722]  driver_probe_device+0xba/0x100
[    2.980726]  __driver_attach+0xe4/0x110
[    2.980729]  ? driver_probe_device+0x100/0x100
[    2.980733]  bus_for_each_dev+0x74/0xb0
[    2.980736]  driver_attach+0x1e/0x20
[    2.980739]  bus_add_driver+0x159/0x230
[    2.980743]  ? 0xffffffffa0393000
[    2.980746]  driver_register+0x70/0xc0
[    2.980749]  ? 0xffffffffa0393000
[    2.980753]  __pci_register_driver+0x57/0x60
[    2.980780]  i915_init+0x55/0x58 [i915]
[    2.980785]  do_one_initcall+0x4a/0x1c4
[    2.980789]  ? do_init_module+0x27/0x210
[    2.980793]  ? kmem_cache_alloc_trace+0x131/0x190
[    2.980797]  do_init_module+0x60/0x210
[    2.980800]  load_module+0x2063/0x22e0
[    2.980804]  ? vfs_read+0x116/0x140
[    2.980807]  ? vfs_read+0x116/0x140
[    2.980811]  __do_sys_finit_module+0xbd/0x120
[    2.980814]  ? __do_sys_finit_module+0xbd/0x120
[    2.980818]  __x64_sys_finit_module+0x1a/0x20
[    2.980821]  do_syscall_64+0x5a/0x110
[    2.980824]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    2.980826] RIP: 0033:0x7f4754e32879
[    2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
[    2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
[    2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
[    2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
[    2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
[    2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
[    2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980884] ---[ end trace 5eb47a76277d4731 ]---

The cause of this appears to be due to the fact that if there's pre-existing display state that was set by the BIOS when i915 loads, it will attempt to perform a modeset before the driver is registered with userspace. Since this happens before the driver's registered with userspace, it's connectors are also unregistered and thus-states which would turn on DPMS on a connector end up getting rejected since the connector isn't registered.

These bugs managed to get past Intel's CI partially due to the fact it never ran a full test on my patches for some reason, but also because all of the tests unload the GPU once before running. Since this bug is only really triggered when the drivers tries to perform a modeset before it's been fully registered with userspace when coming from whatever display configuration the firmware left us with, it likely would never have been picked up by CI in the first place.

After some discussion with vsyrjala, we decided the best course of action would be to just move the unregistered connector checks out of update_connector_routing() and into drm_atomic_set_crtc_for_connector(). The reason for this being that legacy modesetting isn't going to be expecting failures anywhere (at least this is the case with X), so ideally we want to ensure that any DPMS changes will still work even on unregistered connectors. Instead, we now only reject new modesets which would change the current CRTC assigned to an unregistered connector unless no new CRTC is being assigned to replace the connector's previous one.

Fixes 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Cc Daniel Vetter <[email protected]>
Cc Ville Syrjälä <[email protected]>
(cherry picked from commit b5d29843d8ef86d4cde4742e095b81b7fd41e688)
Fixes e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
---
 drivers/gpu/drm/drm_atomic.c        | 21 +++++++++++++++++++++
 drivers/gpu/drm/drm_atomic_helper.c | 21 +--------------------
 2 files changed, 22 insertions(+), 20 deletions(-)
drivers/gpu/drm/drm_atomic.c +21 -0
index 281cf9cbb44c4..1a4b44923aeca 100644
@@ -1702,6 +1702,27 @@ drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
 	struct drm_connector *connector = conn_state->connector;
 	struct drm_crtc_state *crtc_state;
 
+	/*
+	 * For compatibility with legacy users, we want to make sure that
+	 * we allow DPMS On<->Off modesets on unregistered connectors, since
+	 * legacy modesetting users will not be expecting these to fail. We do
+	 * not however, want to allow legacy users to assign a connector
+	 * that's been unregistered from sysfs to another CRTC, since doing
+	 * this with a now non-existent connector could potentially leave us
+	 * in an invalid state.
+	 *
+	 * Since the connector can be unregistered at any point during an
+	 * atomic check or commit, this is racy. But that's OK: all we care
+	 * about is ensuring that userspace can't use this connector for new
+	 * configurations after it's been notified that the connector is no
+	 * longer present.
+	 */
+	if (!READ_ONCE(connector->registered) && crtc) {
+		DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
+				 connector->base.id, connector->name);
+		return -EINVAL;
+	}
+
 	if (conn_state->crtc == crtc)
 		return 0;
 
drivers/gpu/drm/drm_atomic_helper.c +1 -20
index 71c70a031a043..c22062cc99923 100644
@@ -307,26 +307,6 @@ update_connector_routing(struct drm_atomic_state *state,
 		return 0;
 	}
 
-	crtc_state = drm_atomic_get_new_crtc_state(state,
-						   new_connector_state->crtc);
-	/*
-	 * For compatibility with legacy users, we want to make sure that
-	 * we allow DPMS On->Off modesets on unregistered connectors. Modesets
-	 * which would result in anything else must be considered invalid, to
-	 * avoid turning on new displays on dead connectors.
-	 *
-	 * Since the connector can be unregistered at any point during an
-	 * atomic check or commit, this is racy. But that's OK: all we care
-	 * about is ensuring that userspace can't do anything but shut off the
-	 * display on a connector that was destroyed after its been notified,
-	 * not before.
-	 */
-	if (!READ_ONCE(connector->registered) && crtc_state->active) {
-		DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
-				 connector->base.id, connector->name);
-		return -EINVAL;
-	}
-
 	funcs = connector->helper_private;
 
 	if (funcs->atomic_best_encoder)
@@ -371,6 +351,7 @@ update_connector_routing(struct drm_atomic_state *state,
 
 	set_best_encoder(state, new_connector_state, new_encoder);
 
+	crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc);
 	crtc_state->connectors_changed = true;
 
 	DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#191 lore raw

PATCH 164/167 ext4: don't perform block validity checks on the journal inode

In reply to Sasha Levin

From: Theodore Ts'o <[email protected]>

[ Upstream commit 0a944e8a6c66ca04c7afbaa17e22bf208a8b37f0 ]

Since the journal inode is already checked when we added it to the block validity's system zone, if we check it again, we'll just trigger a failure.

This was causing failures like this:

[   53.897001] EXT4-fs error (device sda): ext4_find_extent:909: inode
#8: comm jbd2/sda-8: pblk 121667583 bad header/extent: invalid extent entries - magic f30a, entries 8, max 340(340), depth 0(0)
[   53.931430] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
[   53.938480] Aborting journal on device sda-8.

... but only if the system was under enough memory pressure that logical->physical mapping for the journal inode gets pushed out of the extent cache. (This is why it wasn't noticed earlier.)

Fixes 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
---
 fs/ext4/extents.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
fs/ext4/extents.c +8 -4
index 45aea792d22a0..00bf0b67aae87 100644
@@ -518,10 +518,14 @@ __read_extent_tree_block(const char *function, unsigned int line,
 	}
 	if (buffer_verified(bh) && !(flags & EXT4_EX_FORCE_CACHE))
 		return bh;
-	err = __ext4_ext_check(function, line, inode,
-			       ext_block_hdr(bh), depth, pblk);
-	if (err)
-		goto errout;
+	if (!ext4_has_feature_journal(inode->i_sb) ||
+	    (inode->i_ino !=
+	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum))) {
+		err = __ext4_ext_check(function, line, inode,
+				       ext_block_hdr(bh), depth, pblk);
+		if (err)
+			goto errout;
+	}
 	set_buffer_verified(bh);
 	/*
 	 * If this is a leaf block, cache all of its entries
Signature · 1 line
2.20.1
author maintainer
#194 lore raw

PATCH 167/167 PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround

In reply to Sasha Levin

From: Lyude Paul <[email protected]>

[ Upstream commit ad54567ad5d8e938ee6cf02e4f3867f18835ae6e ]

quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around an apparent BIOS defect. It previously used pci_reset_function(), and the available method was a bus reset, which was fine because there was only one function on the bus. After b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), there are now two functions (the HDA controller and the GPU itself) on the bus, so the reset fails.

Use pci_reset_bus() explicitly instead of pci_reset_function() since it's OK to reset both devices.

[bhelgaas: commit log, add e0547c81bfcf]
Fixes b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Fixes e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary")
Cc Lukas Wunner <[email protected]>
Cc Daniel Drake <[email protected]>
Cc Aaron Plattner <[email protected]>
Cc Peter Wu <[email protected]>
Cc Ilia Mirkin <[email protected]>
Cc Karol Herbst <[email protected]>
Cc Maik Freudenberg <[email protected]>
---
 drivers/pci/quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/quirks.c +1 -1
index 311f8a33e62ff..06be52912dcdb 100644
@@ -5162,7 +5162,7 @@ static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev)
 	 */
 	if (ioread32(map + 0x2240c) & 0x2) {
 		pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n");
-		ret = pci_reset_function(pdev);
+		ret = pci_reset_bus(pdev);
 		if (ret < 0)
 			pci_err(pdev, "Failed to reset GPU: %d\n", ret);
 	}
Signature · 1 line
2.20.1
author maintainer
#193 lore raw

PATCH 166/167 ext4: unsigned int compared against zero

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit fbbbbd2f28aec991f3fbc248df211550fbdfd58c ]

There are two cases where u32 variables n and err are being checked for less than zero error values, the checks is always false because the variables are not signed. Fix this by making the variables ints.

Addresses-Coverity: ("Unsigned compared against 0")

Fixes 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
---
 fs/ext4/block_validity.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ext4/block_validity.c +2 -1
index cd7129b622f85..e8e27cdc2f677 100644
@@ -142,7 +142,8 @@ static int ext4_protect_reserved_inode(struct super_block *sb, u32 ino)
 	struct inode *inode;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_map_blocks map;
-	u32 i = 0, err = 0, num, n;
+	u32 i = 0, num;
+	int err = 0, n;
 
 	if ((ino < EXT4_ROOT_INO) ||
 	    (ino > le32_to_cpu(sbi->s_es->s_inodes_count)))
Signature · 1 line
2.20.1
author maintainer
#192 lore raw

PATCH 165/167 ext4: fix block validity checks for journal inodes using indirect blocks

In reply to Sasha Levin

From: Theodore Ts'o <[email protected]>

[ Upstream commit 170417c8c7bb2cbbdd949bf5c443c0c8f24a203b ]

Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity") failed to add an exception for the journal inode in ext4_check_blockref(), which is the function used by ext4_get_branch() for indirect blocks. This caused attempts to read from the ext3-style journals to fail with:

[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block

Fix this by adding the missing exception check.

Fixes 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
---
 fs/ext4/block_validity.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/ext4/block_validity.c +5 -0
index 9409b1e11a22e..cd7129b622f85 100644
@@ -275,6 +275,11 @@ int ext4_check_blockref(const char *function, unsigned int line,
 	__le32 *bref = p;
 	unsigned int blk;
 
+	if (ext4_has_feature_journal(inode->i_sb) &&
+	    (inode->i_ino ==
+	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
+		return 0;
+
 	while (bref < p+max) {
 		blk = le32_to_cpu(*bref++);
 		if (blk &&
Signature · 1 line
2.20.1
author maintainer
#183 lore raw

PATCH 156/167 NFSv4: Fix delegation state recovery

In reply to Sasha Levin

From: Trond Myklebust <[email protected]>

[ Upstream commit 5eb8d18ca0e001c6055da2b7f30d8f6dca23a44f ]

Once we clear the NFS_DELEGATED_STATE flag, we're telling nfs_delegation_claim_opens() that we're done recovering all open state for that stateid, so we really need to ensure that we test for all open modes that are currently cached and recover them before exiting nfs4_open_delegation_recall().

Fixes 24311f884189d ("NFSv4: Recovery of recalled read delegations...")
---
 fs/nfs/delegation.c |  2 +-
 fs/nfs/delegation.h |  2 +-
 fs/nfs/nfs4proc.c   | 25 ++++++++++++-------------
 3 files changed, 14 insertions(+), 15 deletions(-)
fs/nfs/delegation.c +1 -1
index 75fe92eaa6818..1624618c2bc72 100644
@@ -153,7 +153,7 @@ static int nfs_delegation_claim_opens(struct inode *inode,
 		/* Block nfs4_proc_unlck */
 		mutex_lock(&sp->so_delegreturn_mutex);
 		seq = raw_seqcount_begin(&sp->so_reclaim_seqcount);
-		err = nfs4_open_delegation_recall(ctx, state, stateid, type);
+		err = nfs4_open_delegation_recall(ctx, state, stateid);
 		if (!err)
 			err = nfs_delegation_claim_locks(ctx, state, stateid);
 		if (!err && read_seqcount_retry(&sp->so_reclaim_seqcount, seq))
fs/nfs/delegation.h +1 -1
index bb1ef8c37af42..c95477823fa6b 100644
@@ -61,7 +61,7 @@ void nfs_reap_expired_delegations(struct nfs_client *clp);
 
 /* NFSv4 delegation-related procedures */
 int nfs4_proc_delegreturn(struct inode *inode, struct rpc_cred *cred, const nfs4_stateid *stateid, int issync);
-int nfs4_open_delegation_recall(struct nfs_open_context *ctx, struct nfs4_state *state, const nfs4_stateid *stateid, fmode_t type);
+int nfs4_open_delegation_recall(struct nfs_open_context *ctx, struct nfs4_state *state, const nfs4_stateid *stateid);
 int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state, const nfs4_stateid *stateid);
 bool nfs4_copy_delegation_stateid(struct inode *inode, fmode_t flags, nfs4_stateid *dst, struct rpc_cred **cred);
 bool nfs4_refresh_delegation_stateid(nfs4_stateid *dst, struct inode *inode);
fs/nfs/nfs4proc.c +12 -13
index 31ae3bd5d9d20..621e3cf90f4eb 100644
@@ -2113,12 +2113,10 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct
 		case -NFS4ERR_BAD_HIGH_SLOT:
 		case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
 		case -NFS4ERR_DEADSESSION:
-			set_bit(NFS_DELEGATED_STATE, &state->flags);
 			nfs4_schedule_session_recovery(server->nfs_client->cl_session, err);
 			return -EAGAIN;
 		case -NFS4ERR_STALE_CLIENTID:
 		case -NFS4ERR_STALE_STATEID:
-			set_bit(NFS_DELEGATED_STATE, &state->flags);
 			/* Don't recall a delegation if it was lost */
 			nfs4_schedule_lease_recovery(server->nfs_client);
 			return -EAGAIN;
@@ -2139,7 +2137,6 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct
 			return -EAGAIN;
 		case -NFS4ERR_DELAY:
 		case -NFS4ERR_GRACE:
-			set_bit(NFS_DELEGATED_STATE, &state->flags);
 			ssleep(1);
 			return -EAGAIN;
 		case -ENOMEM:
@@ -2155,8 +2152,7 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct
 }
 
 int nfs4_open_delegation_recall(struct nfs_open_context *ctx,
-		struct nfs4_state *state, const nfs4_stateid *stateid,
-		fmode_t type)
+		struct nfs4_state *state, const nfs4_stateid *stateid)
 {
 	struct nfs_server *server = NFS_SERVER(state->inode);
 	struct nfs4_opendata *opendata;
@@ -2167,20 +2163,23 @@ int nfs4_open_delegation_recall(struct nfs_open_context *ctx,
 	if (IS_ERR(opendata))
 		return PTR_ERR(opendata);
 	nfs4_stateid_copy(&opendata->o_arg.u.delegation, stateid);
-	nfs_state_clear_delegation(state);
-	switch (type & (FMODE_READ|FMODE_WRITE)) {
-	case FMODE_READ|FMODE_WRITE:
-	case FMODE_WRITE:
+	if (!test_bit(NFS_O_RDWR_STATE, &state->flags)) {
 		err = nfs4_open_recover_helper(opendata, FMODE_READ|FMODE_WRITE);
 		if (err)
-			break;
+			goto out;
+	}
+	if (!test_bit(NFS_O_WRONLY_STATE, &state->flags)) {
 		err = nfs4_open_recover_helper(opendata, FMODE_WRITE);
 		if (err)
-			break;
-		/* Fall through */
-	case FMODE_READ:
+			goto out;
+	}
+	if (!test_bit(NFS_O_RDONLY_STATE, &state->flags)) {
 		err = nfs4_open_recover_helper(opendata, FMODE_READ);
+		if (err)
+			goto out;
 	}
+	nfs_state_clear_delegation(state);
+out:
 	nfs4_opendata_put(opendata);
 	return nfs4_handle_delegation_recall_error(server, state, stateid, NULL, err);
 }
Signature · 1 line
2.20.1
author maintainer
#178 lore raw

PATCH 151/167 gpio: don't WARN() on NULL descs if gpiolib is disabled

In reply to Sasha Levin

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit ffe0bbabb0cffceceae07484fde1ec2a63b1537c ]

If gpiolib is disabled, we use the inline stubs from gpio/consumer.h instead of regular definitions of GPIO API. The stubs for 'optional' variants of gpiod_get routines return NULL in this case as if the relevant GPIO wasn't found. This is correct so far.

Calling other (non-gpio_get) stubs from this header triggers a warning because the GPIO descriptor couldn't have been requested. The warning however is unconditional (WARN_ON(1)) and is emitted even if the passed descriptor pointer is NULL.

We don't want to force the users of 'optional' gpio_get to check the returned pointer before calling e.g. gpiod_set_value() so let's only WARN on non-NULL descriptors.

---
 include/linux/gpio/consumer.h | 62 +++++++++++++++++------------------
 1 file changed, 31 insertions(+), 31 deletions(-)
include/linux/gpio/consumer.h +31 -31
index acc4279ad5e3f..412098b24f58b 100644
@@ -222,7 +222,7 @@ static inline void gpiod_put(struct gpio_desc *desc)
 	might_sleep();
 
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 }
 
 static inline void gpiod_put_array(struct gpio_descs *descs)
@@ -230,7 +230,7 @@ static inline void gpiod_put_array(struct gpio_descs *descs)
 	might_sleep();
 
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(descs);
 }
 
 static inline struct gpio_desc *__must_check
@@ -283,7 +283,7 @@ static inline void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
 	might_sleep();
 
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 }
 
 static inline void devm_gpiod_put_array(struct device *dev,
@@ -292,32 +292,32 @@ static inline void devm_gpiod_put_array(struct device *dev,
 	might_sleep();
 
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(descs);
 }
 
 
 static inline int gpiod_get_direction(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -ENOSYS;
 }
 static inline int gpiod_direction_input(struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -ENOSYS;
 }
 static inline int gpiod_direction_output(struct gpio_desc *desc, int value)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -ENOSYS;
 }
 static inline int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -ENOSYS;
 }
 
@@ -325,7 +325,7 @@ static inline int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 static inline int gpiod_get_value(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return 0;
 }
 static inline int gpiod_get_array_value(unsigned int array_size,
@@ -333,25 +333,25 @@ static inline int gpiod_get_array_value(unsigned int array_size,
 					int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 	return 0;
 }
 static inline void gpiod_set_value(struct gpio_desc *desc, int value)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 }
 static inline void gpiod_set_array_value(unsigned int array_size,
 					 struct gpio_desc **desc_array,
 					 int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 }
 static inline int gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return 0;
 }
 static inline int gpiod_get_raw_array_value(unsigned int array_size,
@@ -359,27 +359,27 @@ static inline int gpiod_get_raw_array_value(unsigned int array_size,
 					    int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 	return 0;
 }
 static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 }
 static inline int gpiod_set_raw_array_value(unsigned int array_size,
 					     struct gpio_desc **desc_array,
 					     int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 	return 0;
 }
 
 static inline int gpiod_get_value_cansleep(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return 0;
 }
 static inline int gpiod_get_array_value_cansleep(unsigned int array_size,
@@ -387,25 +387,25 @@ static inline int gpiod_get_array_value_cansleep(unsigned int array_size,
 				     int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 	return 0;
 }
 static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 }
 static inline void gpiod_set_array_value_cansleep(unsigned int array_size,
 					    struct gpio_desc **desc_array,
 					    int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 }
 static inline int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return 0;
 }
 static inline int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
@@ -413,55 +413,55 @@ static inline int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
 					       int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 	return 0;
 }
 static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc,
 						int value)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 }
 static inline int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 						struct gpio_desc **desc_array,
 						int *value_array)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc_array);
 	return 0;
 }
 
 static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -ENOSYS;
 }
 
 static inline int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -ENOSYS;
 }
 
 static inline int gpiod_is_active_low(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return 0;
 }
 static inline int gpiod_cansleep(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return 0;
 }
 
 static inline int gpiod_to_irq(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -EINVAL;
 }
 
@@ -469,7 +469,7 @@ static inline int gpiod_set_consumer_name(struct gpio_desc *desc,
 					  const char *name)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -EINVAL;
 }
 
@@ -481,7 +481,7 @@ static inline struct gpio_desc *gpio_to_desc(unsigned gpio)
 static inline int desc_to_gpio(const struct gpio_desc *desc)
 {
 	/* GPIO can never have been requested */
-	WARN_ON(1);
+	WARN_ON(desc);
 	return -EINVAL;
 }
 
Signature · 1 line
2.20.1
author maintainer
#170 lore raw

PATCH 146/167 dm thin metadata: check if in fail_io mode when setting needs_check

In reply to Sasha Levin

From: Mike Snitzer <[email protected]>

[ Upstream commit 54fa16ee532705985e6c946da455856f18f63ee1 ]

Check if in fail_io mode at start of dm_pool_metadata_set_needs_check(). Otherwise dm_pool_metadata_set_needs_check()'s superblock_lock() can crash in dm_bm_write_lock() while accessing the block manager object that was previously destroyed as part of a failed dm_pool_abort_metadata() that ultimately set fail_io to begin with.

Also, update DMERR() message to more accurately describe superblock_lock() failure.

---
 drivers/md/dm-thin-metadata.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-thin-metadata.c +5 -2
index ed3caceaed07c..6a26afcc1fd6b 100644
@@ -2001,16 +2001,19 @@ int dm_pool_register_metadata_threshold(struct dm_pool_metadata *pmd,
 
 int dm_pool_metadata_set_needs_check(struct dm_pool_metadata *pmd)
 {
-	int r;
+	int r = -EINVAL;
 	struct dm_block *sblock;
 	struct thin_disk_superblock *disk_super;
 
 	down_write(&pmd->root_lock);
+	if (pmd->fail_io)
+		goto out;
+
 	pmd->flags |= THIN_METADATA_NEEDS_CHECK_FLAG;
 
 	r = superblock_lock(pmd, &sblock);
 	if (r) {
-		DMERR("couldn't read superblock");
+		DMERR("couldn't lock superblock");
 		goto out;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#175 lore raw

PATCH 148/167 ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 2756d9143aa517b97961e85412882b8ce31371a6 ]

It turned out that the recent Intel HD-audio controller chips show a significant stall during the system PM resume intermittently. It doesn't happen so often and usually it may read back successfully after one or more seconds, but in some rare worst cases the driver went into fallback mode.

After trial-and-error, we found out that the communication stall seems covered by issuing the sync after each verb write, as already done for AMD and other chipsets. So this patch enables the write-sync flag for the recent Intel chips, Skylake and onward, as a workaround.

Also, since Broxton and co have the very same driver flags as Skylake, refer to the Skylake driver flags instead of defining the same contents again for simplification.

---
 sound/pci/hda/hda_intel.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
sound/pci/hda/hda_intel.c +2 -4
index 7a3e34b120b33..c3e3d80ff7203 100644
@@ -329,13 +329,11 @@ enum {
 
 #define AZX_DCAPS_INTEL_SKYLAKE \
 	(AZX_DCAPS_INTEL_PCH_BASE | AZX_DCAPS_PM_RUNTIME |\
+	 AZX_DCAPS_SYNC_WRITE |\
 	 AZX_DCAPS_SEPARATE_STREAM_TAG | AZX_DCAPS_I915_COMPONENT |\
 	 AZX_DCAPS_I915_POWERWELL)
 
-#define AZX_DCAPS_INTEL_BROXTON \
-	(AZX_DCAPS_INTEL_PCH_BASE | AZX_DCAPS_PM_RUNTIME |\
-	 AZX_DCAPS_SEPARATE_STREAM_TAG | AZX_DCAPS_I915_COMPONENT |\
-	 AZX_DCAPS_I915_POWERWELL)
+#define AZX_DCAPS_INTEL_BROXTON			AZX_DCAPS_INTEL_SKYLAKE
 
 /* quirks for ATI SB / AMD Hudson */
 #define AZX_DCAPS_PRESET_ATI_SB \
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 43/167 powerpc/pkeys: Fix handling of pkey state across fork()

In reply to Sasha Levin

From: Ram Pai <[email protected]>

[ Upstream commit 2cd4bd192ee94848695c1c052d87913260e10f36 ]

Protection key tracking information is not copied over to the mm_struct of the child during fork(). This can cause the child to erroneously allocate keys that were already allocated. Any allocated execute-only key is lost aswell.

Add code; called by dup_mmap(), to copy the pkey state from parent to child explicitly.

This problem was originally found by Dave Hansen on x86, which turns out to be a problem on powerpc aswell.

Fixes cf43d3b26452 ("powerpc: Enable pkey subsystem")
Cc [email protected] # v4.16+
---
 arch/powerpc/include/asm/mmu_context.h | 15 +++++++++------
 arch/powerpc/mm/pkeys.c                | 10 ++++++++++
 2 files changed, 19 insertions(+), 6 deletions(-)
arch/powerpc/include/asm/mmu_context.h +9 -6
index b694d6af11508..ae953958c0f33 100644
@@ -217,12 +217,6 @@ static inline void enter_lazy_tlb(struct mm_struct *mm,
 #endif
 }
 
-static inline int arch_dup_mmap(struct mm_struct *oldmm,
-				struct mm_struct *mm)
-{
-	return 0;
-}
-
 #ifndef CONFIG_PPC_BOOK3S_64
 static inline void arch_exit_mmap(struct mm_struct *mm)
 {
@@ -247,6 +241,7 @@ static inline void arch_bprm_mm_init(struct mm_struct *mm,
 #ifdef CONFIG_PPC_MEM_KEYS
 bool arch_vma_access_permitted(struct vm_area_struct *vma, bool write,
 			       bool execute, bool foreign);
+void arch_dup_pkeys(struct mm_struct *oldmm, struct mm_struct *mm);
 #else /* CONFIG_PPC_MEM_KEYS */
 static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 		bool write, bool execute, bool foreign)
@@ -259,6 +254,7 @@ static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 #define thread_pkey_regs_save(thread)
 #define thread_pkey_regs_restore(new_thread, old_thread)
 #define thread_pkey_regs_init(thread)
+#define arch_dup_pkeys(oldmm, mm)
 
 static inline u64 pte_to_hpte_pkey_bits(u64 pteflags)
 {
@@ -267,5 +263,12 @@ static inline u64 pte_to_hpte_pkey_bits(u64 pteflags)
 
 #endif /* CONFIG_PPC_MEM_KEYS */
 
+static inline int arch_dup_mmap(struct mm_struct *oldmm,
+				struct mm_struct *mm)
+{
+	arch_dup_pkeys(oldmm, mm);
+	return 0;
+}
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_MMU_CONTEXT_H */
arch/powerpc/mm/pkeys.c +10 -0
index b271b283c785e..25a8dd9cd71db 100644
@@ -414,3 +414,13 @@ bool arch_vma_access_permitted(struct vm_area_struct *vma, bool write,
 
 	return pkey_access_permitted(vma_pkey(vma), write, execute);
 }
+
+void arch_dup_pkeys(struct mm_struct *oldmm, struct mm_struct *mm)
+{
+	if (static_branch_likely(&pkey_disabled))
+		return;
+
+	/* Duplicate the oldmm pkey state in mm: */
+	mm_pkey_allocation_map(mm) = mm_pkey_allocation_map(oldmm);
+	mm->context.execute_only_pkey = oldmm->context.execute_only_pkey;
+}
Signature · 1 line
2.20.1
author maintainer
#115 lore raw

PATCH 103/167 PCI: Add macro for Switchtec quirk declarations

In reply to Sasha Levin

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 01d5d7fa8376c6b5acda86e16fcad22de6bba486 ]

Add SWITCHTEC_QUIRK() to reduce redundancy in declaring devices that use quirk_switchtec_ntb_dma_alias().

By itself, this is no functional change, but a subsequent patch updates SWITCHTEC_QUIRK() to fix ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB").

Fixes ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB")
[bhelgaas: split to separate patch]
---
 drivers/pci/quirks.c | 90 +++++++++++++++++---------------------------
 1 file changed, 34 insertions(+), 56 deletions(-)
drivers/pci/quirks.c +34 -56
index 28c64f84bfe72..6cda8b7ecc821 100644
@@ -5082,59 +5082,37 @@ static void quirk_switchtec_ntb_dma_alias(struct pci_dev *pdev)
 	pci_iounmap(pdev, mmio);
 	pci_disable_device(pdev);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8531,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8532,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8533,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8534,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8535,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8536,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8543,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8544,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8545,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8546,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8551,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8552,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8553,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8554,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8555,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8556,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8561,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8562,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8563,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8564,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8565,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8566,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8571,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8572,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8573,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8574,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8575,
-			quirk_switchtec_ntb_dma_alias);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, 0x8576,
-			quirk_switchtec_ntb_dma_alias);
+#define SWITCHTEC_QUIRK(vid) \
+	DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MICROSEMI, vid, \
+				quirk_switchtec_ntb_dma_alias)
+
+SWITCHTEC_QUIRK(0x8531);  /* PFX 24xG3 */
+SWITCHTEC_QUIRK(0x8532);  /* PFX 32xG3 */
+SWITCHTEC_QUIRK(0x8533);  /* PFX 48xG3 */
+SWITCHTEC_QUIRK(0x8534);  /* PFX 64xG3 */
+SWITCHTEC_QUIRK(0x8535);  /* PFX 80xG3 */
+SWITCHTEC_QUIRK(0x8536);  /* PFX 96xG3 */
+SWITCHTEC_QUIRK(0x8541);  /* PSX 24xG3 */
+SWITCHTEC_QUIRK(0x8542);  /* PSX 32xG3 */
+SWITCHTEC_QUIRK(0x8543);  /* PSX 48xG3 */
+SWITCHTEC_QUIRK(0x8544);  /* PSX 64xG3 */
+SWITCHTEC_QUIRK(0x8545);  /* PSX 80xG3 */
+SWITCHTEC_QUIRK(0x8546);  /* PSX 96xG3 */
+SWITCHTEC_QUIRK(0x8551);  /* PAX 24XG3 */
+SWITCHTEC_QUIRK(0x8552);  /* PAX 32XG3 */
+SWITCHTEC_QUIRK(0x8553);  /* PAX 48XG3 */
+SWITCHTEC_QUIRK(0x8554);  /* PAX 64XG3 */
+SWITCHTEC_QUIRK(0x8555);  /* PAX 80XG3 */
+SWITCHTEC_QUIRK(0x8556);  /* PAX 96XG3 */
+SWITCHTEC_QUIRK(0x8561);  /* PFXL 24XG3 */
+SWITCHTEC_QUIRK(0x8562);  /* PFXL 32XG3 */
+SWITCHTEC_QUIRK(0x8563);  /* PFXL 48XG3 */
+SWITCHTEC_QUIRK(0x8564);  /* PFXL 64XG3 */
+SWITCHTEC_QUIRK(0x8565);  /* PFXL 80XG3 */
+SWITCHTEC_QUIRK(0x8566);  /* PFXL 96XG3 */
+SWITCHTEC_QUIRK(0x8571);  /* PFXI 24XG3 */
+SWITCHTEC_QUIRK(0x8572);  /* PFXI 32XG3 */
+SWITCHTEC_QUIRK(0x8573);  /* PFXI 48XG3 */
+SWITCHTEC_QUIRK(0x8574);  /* PFXI 64XG3 */
+SWITCHTEC_QUIRK(0x8575);  /* PFXI 80XG3 */
+SWITCHTEC_QUIRK(0x8576);  /* PFXI 96XG3 */
Signature · 1 line
2.20.1
author maintainer
#103 lore raw

PATCH 91/167 IB/mlx5: Reset access mask when looping inside page fault handler

In reply to Sasha Levin

From: Moni Shoua <[email protected]>

[ Upstream commit 1abe186ed8a6593069bc122da55fc684383fdc1c ]

If page-fault handler spans multiple MRs then the access mask needs to be reset before each MR handling or otherwise write access will be granted to mapped pages instead of read-only.

Cc <[email protected]> # 3.19
Fixes 7bdf65d411c1 ("IB/mlx5: Handle page faults")
---
 drivers/infiniband/hw/mlx5/odp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/odp.c +2 -1
index 9e1cac8cb2609..453e5c4ac19f4 100644
@@ -497,7 +497,7 @@ void mlx5_ib_free_implicit_mr(struct mlx5_ib_mr *imr)
 static int pagefault_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr,
 			u64 io_virt, size_t bcnt, u32 *bytes_mapped)
 {
-	u64 access_mask = ODP_READ_ALLOWED_BIT;
+	u64 access_mask;
 	int npages = 0, page_shift, np;
 	u64 start_idx, page_mask;
 	struct ib_umem_odp *odp;
@@ -522,6 +522,7 @@ static int pagefault_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr,
 	page_shift = mr->umem->page_shift;
 	page_mask = ~(BIT(page_shift) - 1);
 	start_idx = (io_virt - (mr->mmkey.iova & page_mask)) >> page_shift;
+	access_mask = ODP_READ_ALLOWED_BIT;
 
 	if (mr->umem->writable)
 		access_mask |= ODP_WRITE_ALLOWED_BIT;
Signature · 1 line
2.20.1
author maintainer
#108 lore raw

PATCH 96/167 media: i2c: tda1997x: select V4L2_FWNODE

In reply to Sasha Levin

From: Koen Vandeputte <[email protected]>

[ Upstream commit 5f2efda71c09b12012053f457fac7692f268b72c ]

Building tda1997x fails now unless V4L2_FWNODE is selected:

drivers/media/i2c/tda1997x.o: in function tda1997x_parse_dt' undefined reference to v4l2_fwnode_endpoint_parse'

While at it, also sort the selections alphabetically

Fixes 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
---
 drivers/media/i2c/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/i2c/Kconfig +2 -1
index 63c9ac2c6a5ff..8b1ae1d6680b7 100644
@@ -60,8 +60,9 @@ config VIDEO_TDA1997X
 	tristate "NXP TDA1997x HDMI receiver"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	depends on SND_SOC
-	select SND_PCM
 	select HDMI
+	select SND_PCM
+	select V4L2_FWNODE
 	---help---
 	  V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
 
Signature · 1 line
2.20.1
author maintainer
#106 lore raw

PATCH 94/167 KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit b68f3cc7d978943fcf85148165b00594c38db776 ]

Invoking the 64-bit variation on a 32-bit kenrel will crash the guest, trigger a WARN, and/or lead to a buffer overrun in the host, e.g. rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64.

KVM allows userspace to report long mode support via CPUID, even though the guest is all but guaranteed to crash if it actually tries to enable long mode. But, a pure 32-bit guest that is ignorant of long mode will happily plod along.

SMM complicates things as 64-bit CPUs use a different SMRAM save state area. KVM handles this correctly for 64-bit kernels, e.g. uses the legacy save state map if userspace has hid long mode from the guest, but doesn't fare well when userspace reports long mode support on a 32-bit host kernel (32-bit KVM doesn't support 64-bit guests).

Since the alternative is to crash the guest, e.g. by not loading state or explicitly requesting shutdown, unconditionally use the legacy SMRAM save state map for 32-bit KVM. If a guest has managed to get far enough to handle SMIs when running under a weird/buggy userspace hypervisor, then don't deliberately crash the guest since there are no downsides (from KVM's perspective) to allow it to continue running.

Fixes 660a5d517aaab ("KVM: x86: save/load state on SMM switch")
---
 arch/x86/kvm/emulate.c | 10 ++++++++++
 arch/x86/kvm/x86.c     | 10 ++++++----
 2 files changed, 16 insertions(+), 4 deletions(-)
arch/x86/kvm/emulate.c +10 -0
index 4a688ef9e4481..429728b35bca1 100644
@@ -2331,12 +2331,16 @@ static int em_lseg(struct x86_emulate_ctxt *ctxt)
 
 static int emulator_has_longmode(struct x86_emulate_ctxt *ctxt)
 {
+#ifdef CONFIG_X86_64
 	u32 eax, ebx, ecx, edx;
 
 	eax = 0x80000001;
 	ecx = 0;
 	ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx, false);
 	return edx & bit(X86_FEATURE_LM);
+#else
+	return false;
+#endif
 }
 
 #define GET_SMSTATE(type, smbase, offset)				  \
@@ -2381,6 +2385,7 @@ static int rsm_load_seg_32(struct x86_emulate_ctxt *ctxt, u64 smbase, int n)
 	return X86EMUL_CONTINUE;
 }
 
+#ifdef CONFIG_X86_64
 static int rsm_load_seg_64(struct x86_emulate_ctxt *ctxt, u64 smbase, int n)
 {
 	struct desc_struct desc;
@@ -2399,6 +2404,7 @@ static int rsm_load_seg_64(struct x86_emulate_ctxt *ctxt, u64 smbase, int n)
 	ctxt->ops->set_segment(ctxt, selector, &desc, base3, n);
 	return X86EMUL_CONTINUE;
 }
+#endif
 
 static int rsm_enter_protected_mode(struct x86_emulate_ctxt *ctxt,
 				    u64 cr0, u64 cr3, u64 cr4)
@@ -2499,6 +2505,7 @@ static int rsm_load_state_32(struct x86_emulate_ctxt *ctxt, u64 smbase)
 	return rsm_enter_protected_mode(ctxt, cr0, cr3, cr4);
 }
 
+#ifdef CONFIG_X86_64
 static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt, u64 smbase)
 {
 	struct desc_struct desc;
@@ -2560,6 +2567,7 @@ static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt, u64 smbase)
 
 	return X86EMUL_CONTINUE;
 }
+#endif
 
 static int em_rsm(struct x86_emulate_ctxt *ctxt)
 {
@@ -2616,9 +2624,11 @@ static int em_rsm(struct x86_emulate_ctxt *ctxt)
 	if (ctxt->ops->pre_leave_smm(ctxt, smbase))
 		return X86EMUL_UNHANDLEABLE;
 
+#ifdef CONFIG_X86_64
 	if (emulator_has_longmode(ctxt))
 		ret = rsm_load_state_64(ctxt, smbase + 0x8000);
 	else
+#endif
 		ret = rsm_load_state_32(ctxt, smbase + 0x8000);
 
 	if (ret != X86EMUL_CONTINUE) {
arch/x86/kvm/x86.c +6 -4
index 253326aaea9ac..1b80b4bd0fbf2 100644
@@ -7226,9 +7226,9 @@ static void enter_smm_save_state_32(struct kvm_vcpu *vcpu, char *buf)
 	put_smstate(u32, buf, 0x7ef8, vcpu->arch.smbase);
 }
 
+#ifdef CONFIG_X86_64
 static void enter_smm_save_state_64(struct kvm_vcpu *vcpu, char *buf)
 {
-#ifdef CONFIG_X86_64
 	struct desc_ptr dt;
 	struct kvm_segment seg;
 	unsigned long val;
@@ -7278,10 +7278,8 @@ static void enter_smm_save_state_64(struct kvm_vcpu *vcpu, char *buf)
 
 	for (i = 0; i < 6; i++)
 		enter_smm_save_seg_64(vcpu, buf, i);
-#else
-	WARN_ON_ONCE(1);
-#endif
 }
+#endif
 
 static void enter_smm(struct kvm_vcpu *vcpu)
 {
@@ -7292,9 +7290,11 @@ static void enter_smm(struct kvm_vcpu *vcpu)
 
 	trace_kvm_enter_smm(vcpu->vcpu_id, vcpu->arch.smbase, true);
 	memset(buf, 0, 512);
+#ifdef CONFIG_X86_64
 	if (guest_cpuid_has(vcpu, X86_FEATURE_LM))
 		enter_smm_save_state_64(vcpu, buf);
 	else
+#endif
 		enter_smm_save_state_32(vcpu, buf);
 
 	/*
@@ -7352,8 +7352,10 @@ static void enter_smm(struct kvm_vcpu *vcpu)
 	kvm_set_segment(vcpu, &ds, VCPU_SREG_GS);
 	kvm_set_segment(vcpu, &ds, VCPU_SREG_SS);
 
+#ifdef CONFIG_X86_64
 	if (guest_cpuid_has(vcpu, X86_FEATURE_LM))
 		kvm_x86_ops->set_efer(vcpu, 0);
+#endif
 
 	kvm_update_cpuid(vcpu);
 	kvm_mmu_reset_context(vcpu);
Signature · 1 line
2.20.1
author maintainer
#107 lore raw

PATCH 95/167 cifs: Fix lease buffer length error

In reply to Sasha Levin

From: ZhangXiaoxu <[email protected]>

[ Upstream commit b57a55e2200ede754e4dc9cce4ba9402544b9365 ]

There is a KASAN slab-out-of-bounds:

BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0
Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539

CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
            rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Call Trace:
 dump_stack+0xdd/0x12a
 print_address_description+0xa7/0x540
 kasan_report+0x1ff/0x550
 check_memory_region+0x2f1/0x310
 memcpy+0x2f/0x80
 _copy_from_iter_full+0x783/0xaa0
 tcp_sendmsg_locked+0x1840/0x4140
 tcp_sendmsg+0x37/0x60
 inet_sendmsg+0x18c/0x490
 sock_sendmsg+0xae/0x130
 smb_send_kvec+0x29c/0x520
 __smb_send_rqst+0x3ef/0xc60
 smb_send_rqst+0x25a/0x2e0
 compound_send_recv+0x9e8/0x2af0
 cifs_send_recv+0x24/0x30
 SMB2_open+0x35e/0x1620
 open_shroot+0x27b/0x490
 smb2_open_op_close+0x4e1/0x590
 smb2_query_path_info+0x2ac/0x650
 cifs_get_inode_info+0x1058/0x28f0
 cifs_root_iget+0x3bb/0xf80
 cifs_smb3_do_mount+0xe00/0x14c0
 cifs_do_mount+0x15/0x20
 mount_fs+0x5e/0x290
 vfs_kern_mount+0x88/0x460
 do_mount+0x398/0x31e0
 ksys_mount+0xc6/0x150
 __x64_sys_mount+0xea/0x190
 do_syscall_64+0x122/0x590
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

It can be reproduced by the following step:
1. samba configured with: server max protocol = SMB2_10
2. mount -o vers=default

When parse the mount version parameter, the 'ops' and 'vals' was setted to smb30, if negotiate result is smb21, just update the 'ops' to smb21, but the 'vals' is still smb30. When add lease context, the iov_base is allocated with smb21 ops, but the iov_len is initiallited with the smb30. Because the iov_len is longer than iov_base, when send the message, copy array out of bounds.

we need to keep the 'ops' and 'vals' consistent.

Fixes 9764c02fcbad ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)")
Fixes d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
---
 fs/cifs/smb2pdu.c | 1 +
 1 file changed, 1 insertion(+)
fs/cifs/smb2pdu.c +1 -0
index 2bc47eb6215e2..cbe633f1840a2 100644
@@ -712,6 +712,7 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses)
 		} else if (rsp->DialectRevision == cpu_to_le16(SMB21_PROT_ID)) {
 			/* ops set to 3.0 by default for default so update */
 			ses->server->ops = &smb21_operations;
+			ses->server->vals = &smb21_values;
 		}
 	} else if (le16_to_cpu(rsp->DialectRevision) !=
 				ses->server->vals->protocol_id) {
Signature · 1 line
2.20.1