arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
Subsystems (2)
PATCH v3 1/1 arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.
The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree and a64-olinuxino_defconfig.
changes:
v3: Squash two separate patches into a single one.
v2: Separate device tree for emmc models.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 23 ++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 +++++ configs/a64-olinuxino-emmc_defconfig | 17 ++++++++++++++++ 4 files changed, 46 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-olinuxino-emmc.dts create mode 100644 configs/a64-olinuxino-emmc_defconfig
arch/arm/dts/Makefile +1 -0
@@ -530,6 +530,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-nanopi-a64.dtb \ sun50i-a64-oceanic-5205-5inmfd.dtb \ sun50i-a64-olinuxino.dtb \ + sun50i-a64-olinuxino-emmc.dtb \ sun50i-a64-orangepi-win.dtb \ sun50i-a64-pine64-lts.dtb \ sun50i-a64-pine64-plus.dtb \
arch/arm/dts/sun50i-a64-olinuxino-emmc.dts new file +23 -0
@@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Martin Ayotte <[email protected]> + * Copyright (C) 2019 Sunil Mohan Adapa <[email protected]> + */ + +#include "sun50i-a64-olinuxino.dts" + +/ { + model = "Olimex A64-Olinuxino-eMMC"; + compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +};
board/sunxi/MAINTAINERS +5 -0
@@ -106,6 +106,11 @@ M: Jagan Teki <[email protected]> S: Maintained F: configs/a64-olinuxino_defconfig +A64-OLINUXINO-EMMC BOARD +M: Sunil Mohan Adapa <[email protected]> +S: Maintained +F: configs/a64-olinuxino-emmc_defconfig + A80 OPTIMUS BOARD M: Chen-Yu Tsai <[email protected]> S: Maintained
configs/a64-olinuxino-emmc_defconfig new file +17 -0
@@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_USE_PREBOOT=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino-emmc" +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
Signature · 1 line
2.20.1
PATCH v3 1/1 arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
Quoted 7 lines · Sunil Mohan Adapa
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.
Quoted 5 lines
The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
Updated as per checkpatch.pl and
Applied to u-boot-sunxi/master