Skip to contentSkip to conversation

drm/ast: Fix potential NULL-pointer read during atomic mode setting

PATCH Superseded Thomas Zimmermann 2 participants 2 messages Nov 14, 2019

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Thomas Zimmermann

author maintainer
#0 lore raw

PATCH 1/1 drm/ast: Fix potential NULL-pointer read during atomic mode setting

When enabling the CRTC after waking up from a power-saving mode, the primary plane's framebuffer might be NULL, which leads to a stack trace as shown below.

  [  632.624608] BUG: kernel NULL pointer dereference, address: 0000000000000048
  [  632.624631] #PF: supervisor read access in kernel mode
  [  632.624639] #PF: error_code(0x0000) - not-present page
  [  632.624647] PGD 0 P4D 0
  [  632.624654] Oops: 0000 [#1] SMP PTI
  [  632.624662] CPU: 0 PID: 2082 Comm: gnome-shell Tainted: G            E     5.4.0-rc7-1-default+ #114
  [  632.624673] Hardware name: Sun Microsystems SUN FIRE X2270 M2/SUN FIRE X2270 M2, BIOS 2.05    07/01/2010
  [  632.624689] RIP: 0010:ast_crtc_helper_atomic_enable+0x7d/0x680 [ast]
  [  632.624698] Code: 48 8b 80 e0 02 00 00 4c 8b 60 10 31 c0 f3 48 ab 48 8b 83 78 04 00 00 4c 89 ef 48 8d 70 18 e8 9a e9 55 ce 48 8b 83 78 04 00 00 <49> 8b 7c 24 48 4c 89 ea 4c 8d 44 24 28 48 8d 4c 24 20 48 8d 70 18
  [  632.624718] RSP: 0018:ffffbe9ec123fa40 EFLAGS: 00010246
  [  632.624726] RAX: ffff95a13cfd3400 RBX: ffff95a13cf32000 RCX: 0000000000000000
  [  632.624735] RDX: 0000000000000000 RSI: ffff95a13cfd34e8 RDI: ffffbe9ec123fb40
  [  632.624744] RBP: ffffbe9ec123fb80 R08: 0000000000000000 R09: 0000000000000003
  [  632.624753] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  [  632.624762] R13: ffffbe9ec123fa70 R14: ffff95a13beb7000 R15: ffff95a13cf32800
  [  632.624772] FS:  00007f6d2763e140(0000) GS:ffff95a134000000(0000) knlGS:0000000000000000
  [  632.624782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  632.624790] CR2: 0000000000000048 CR3: 00000001192f8004 CR4: 00000000000206f0
  [  632.624800] Call Trace:
  [  632.624811]  ? __lock_acquire+0x409/0x7c0
  [  632.624830]  drm_atomic_helper_commit_modeset_enables+0x1af/0x200
  [  632.624840]  drm_atomic_helper_commit_tail+0x32/0x70
  [  632.624849]  commit_tail+0xc7/0x110
  [  632.624857]  drm_atomic_helper_commit+0x121/0x130
  [  632.624867]  drm_atomic_connector_commit_dpms+0xd7/0x100
  [  632.624878]  set_property_atomic+0xaf/0x110
  [  632.624890]  drm_mode_obj_set_property_ioctl+0xbb/0x190
  [  632.624899]  ? drm_mode_obj_find_prop_id+0x40/0x40
  [  632.624909]  drm_ioctl_kernel+0x86/0xd0
  [  632.624918]  drm_ioctl+0x1e4/0x36b
  [  632.624925]  ? drm_mode_obj_find_prop_id+0x40/0x40
  [  632.624939]  do_vfs_ioctl+0x4bd/0x6e0
  [  632.624949]  ksys_ioctl+0x5e/0x90
  [  632.624957]  __x64_sys_ioctl+0x16/0x20
  [  632.624966]  do_syscall_64+0x5a/0x220
  [  632.624976]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [  632.624984] RIP: 0033:0x7f6d2b0de387
  [  632.624991] Code: 00 00 90 48 8b 05 f9 9a 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c9 9a 0c 00 f7 d8 64 89 01 48
  [  632.625011] RSP: 002b:00007fffb49def38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [  632.625021] RAX: ffffffffffffffda RBX: 00007fffb49def70 RCX: 00007f6d2b0de387
  [  632.625030] RDX: 00007fffb49def70 RSI: 00000000c01864ba RDI: 0000000000000009
  [  632.625040] RBP: 00000000c01864ba R08: 0000000000000000 R09: 00000000c0c0c0c0
  [  632.625049] R10: 0000000000000030 R11: 0000000000000246 R12: 000055bc367eb920
  [  632.625058] R13: 0000000000000009 R14: 0000000000000002 R15: 0000000000000000
  [  632.625071] Modules linked in: ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) af_packet(E) scsi_transport_iscsi(E) dmi_sysfs(E) msr(E) xfs(E) intel_powerclamp(E) coretemp(E) k)
  [  632.625185] CR2: 0000000000000048

The STR is

* start gdm and wait for it to switch off the display
* wake up the display by pressing a key

The fix avoids dereferencing the pointer and postpones modesetting until there's a framebuffer bound to the CRTC.

Fixes b48e1b6ffd28 ("drm/ast: Add CRTC helpers for atomic modesetting")
Cc Gerd Hoffmann <[email protected]>
Cc Dave Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc "Y.C. Chen" <[email protected]>
Cc Sam Ravnborg <[email protected]>
---
 drivers/gpu/drm/ast/ast_mode.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_mode.c +12 -1
index 4725ec911a66..b173a8e5c00b 100644
@@ -774,7 +774,8 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
 					       &adjusted_mode, &vbios_mode);
 		if (!succ)
 			return -EINVAL;
-	}
+	} else
+		state->mode_changed = true;
 
 	return 0;
 }
@@ -824,6 +825,9 @@ ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 	struct ast_vbios_mode_info vbios_mode;
 	bool succ;
 
+	if (!fb)
+		return;
+
 	memset(&adjusted_mode, 0, sizeof(adjusted_mode));
 	drm_mode_copy(&adjusted_mode, &crtc->state->adjusted_mode);
 
@@ -832,6 +836,13 @@ ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 	if (WARN_ON_ONCE(!succ))
 		return;
 
+	/*
+	 * TODO: Some of the registers' values depend on the framebuffer
+	 *       configuration. To resolve this, fully separate the mode
+	 *	 setting from the framebuffer update. The vbios mode info
+	 *       should be gathered by atomic_check, the framebuffer regs
+	 *       should be set in primary plane's update function.
+	 */
 	ast_set_vbios_mode_reg(crtc, &adjusted_mode, &vbios_mode);
 	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
 	ast_set_std_reg(crtc, &adjusted_mode, &vbios_mode);
Signature · 6 lines
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw
Quoted 59 lines · Thomas Zimmermann

When enabling the CRTC after waking up from a power-saving mode, the primary plane's framebuffer might be NULL, which leads to a stack trace as shown below.

  [  632.624608] BUG: kernel NULL pointer dereference, address: 0000000000000048
  [  632.624631] #PF: supervisor read access in kernel mode
  [  632.624639] #PF: error_code(0x0000) - not-present page
  [  632.624647] PGD 0 P4D 0
  [  632.624654] Oops: 0000 [#1] SMP PTI
  [  632.624662] CPU: 0 PID: 2082 Comm: gnome-shell Tainted: G            E     5.4.0-rc7-1-default+ #114
  [  632.624673] Hardware name: Sun Microsystems SUN FIRE X2270 M2/SUN FIRE X2270 M2, BIOS 2.05    07/01/2010
  [  632.624689] RIP: 0010:ast_crtc_helper_atomic_enable+0x7d/0x680 [ast]
  [  632.624698] Code: 48 8b 80 e0 02 00 00 4c 8b 60 10 31 c0 f3 48 ab 48 8b 83 78 04 00 00 4c 89 ef 48 8d 70 18 e8 9a e9 55 ce 48 8b 83 78 04 00 00 <49> 8b 7c 24 48 4c 89 ea 4c 8d 44 24 28 48 8d 4c 24 20 48 8d 70 18
  [  632.624718] RSP: 0018:ffffbe9ec123fa40 EFLAGS: 00010246
  [  632.624726] RAX: ffff95a13cfd3400 RBX: ffff95a13cf32000 RCX: 0000000000000000
  [  632.624735] RDX: 0000000000000000 RSI: ffff95a13cfd34e8 RDI: ffffbe9ec123fb40
  [  632.624744] RBP: ffffbe9ec123fb80 R08: 0000000000000000 R09: 0000000000000003
  [  632.624753] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  [  632.624762] R13: ffffbe9ec123fa70 R14: ffff95a13beb7000 R15: ffff95a13cf32800
  [  632.624772] FS:  00007f6d2763e140(0000) GS:ffff95a134000000(0000) knlGS:0000000000000000
  [  632.624782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  632.624790] CR2: 0000000000000048 CR3: 00000001192f8004 CR4: 00000000000206f0
  [  632.624800] Call Trace:
  [  632.624811]  ? __lock_acquire+0x409/0x7c0
  [  632.624830]  drm_atomic_helper_commit_modeset_enables+0x1af/0x200
  [  632.624840]  drm_atomic_helper_commit_tail+0x32/0x70
  [  632.624849]  commit_tail+0xc7/0x110
  [  632.624857]  drm_atomic_helper_commit+0x121/0x130
  [  632.624867]  drm_atomic_connector_commit_dpms+0xd7/0x100
  [  632.624878]  set_property_atomic+0xaf/0x110
  [  632.624890]  drm_mode_obj_set_property_ioctl+0xbb/0x190
  [  632.624899]  ? drm_mode_obj_find_prop_id+0x40/0x40
  [  632.624909]  drm_ioctl_kernel+0x86/0xd0
  [  632.624918]  drm_ioctl+0x1e4/0x36b
  [  632.624925]  ? drm_mode_obj_find_prop_id+0x40/0x40
  [  632.624939]  do_vfs_ioctl+0x4bd/0x6e0
  [  632.624949]  ksys_ioctl+0x5e/0x90
  [  632.624957]  __x64_sys_ioctl+0x16/0x20
  [  632.624966]  do_syscall_64+0x5a/0x220
  [  632.624976]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [  632.624984] RIP: 0033:0x7f6d2b0de387
  [  632.624991] Code: 00 00 90 48 8b 05 f9 9a 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c9 9a 0c 00 f7 d8 64 89 01 48
  [  632.625011] RSP: 002b:00007fffb49def38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [  632.625021] RAX: ffffffffffffffda RBX: 00007fffb49def70 RCX: 00007f6d2b0de387
  [  632.625030] RDX: 00007fffb49def70 RSI: 00000000c01864ba RDI: 0000000000000009
  [  632.625040] RBP: 00000000c01864ba R08: 0000000000000000 R09: 00000000c0c0c0c0
  [  632.625049] R10: 0000000000000030 R11: 0000000000000246 R12: 000055bc367eb920
  [  632.625058] R13: 0000000000000009 R14: 0000000000000002 R15: 0000000000000000
  [  632.625071] Modules linked in: ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) af_packet(E) scsi_transport_iscsi(E) dmi_sysfs(E) msr(E) xfs(E) intel_powerclamp(E) coretemp(E) k)
  [  632.625185] CR2: 0000000000000048

The STR is

* start gdm and wait for it to switch off the display
* wake up the display by pressing a key

The fix avoids dereferencing the pointer and postpones modesetting until there's a framebuffer bound to the CRTC.

Quoted 7 lines
Fixes b48e1b6ffd28 ("drm/ast: Add CRTC helpers for atomic modesetting")
Cc Gerd Hoffmann <[email protected]>
Cc Dave Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc "Y.C. Chen" <[email protected]>
Cc Sam Ravnborg <[email protected]>

This looks like papering over the real bug, which is lack of atomic_check in the primary plane. You probably want to call drm_atomic_helper_check_plane_state similar to what the simpler kms helper does. That should stop this kind of stuff.

Specifically you then want to check whether your primary plane is visible (compute into plane_state->visible) and reject the atomic commit if that's not the case.
-Daniel

Quoted 45 lines
---
 drivers/gpu/drm/ast/ast_mode.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_mode.c +12 -1
index 4725ec911a66..b173a8e5c00b 100644
@@ -774,7 +774,8 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
 					       &adjusted_mode, &vbios_mode);
 		if (!succ)
 			return -EINVAL;
-	}
+	} else
+		state->mode_changed = true;
 
 	return 0;
 }
@@ -824,6 +825,9 @@ ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 	struct ast_vbios_mode_info vbios_mode;
 	bool succ;
 
+	if (!fb)
+		return;
+
 	memset(&adjusted_mode, 0, sizeof(adjusted_mode));
 	drm_mode_copy(&adjusted_mode, &crtc->state->adjusted_mode);
 
@@ -832,6 +836,13 @@ ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 	if (WARN_ON_ONCE(!succ))
 		return;
 
+	/*
+	 * TODO: Some of the registers' values depend on the framebuffer
+	 *       configuration. To resolve this, fully separate the mode
+	 *	 setting from the framebuffer update. The vbios mode info
+	 *       should be gathered by atomic_check, the framebuffer regs
+	 *       should be set in primary plane's update function.
+	 */
 	ast_set_vbios_mode_reg(crtc, &adjusted_mode, &vbios_mode);
 	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
 	ast_set_std_reg(crtc, &adjusted_mode, &vbios_mode);
Signature · 1 line
2.23.0
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel