Skip to contentSkip to conversation

scsi: remove legacy cmd_list implementation

PATCH Superseded Hannes Reinecke 2 participants 9 messages Nov 15, 2019 – Nov 17, 2019

Subsystems (2)

v3 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v3 cover scsi: remove legacy cmd_list implementation

Hi all,

with the switch to blk-mq we have an efficient way of looking up outstanding commands via blk_mq_rq_busy_iter().
In this patchset the dpt_i2o and aacraid drivers are switched over to using that function, and the now obsolete cmd_list implemantation in the SCSI midlayer is removed.

As usual, comments and reviews are welcome.

Changes to v1:
- Fixup kbuild warning

Changes to v2:
- Add scsi_host_busy_iter()
- Include reviews from Christoph

Hannes Reinecke (5):
scsi: add scsi_host_busy_iter()
dpt_i2o: use midlayer tcq implementation
dpt_i2o: rename adpt_i2o_to_scsi() to adpt_i2o_scsi_complete()
aacraid: use scsi_host_busy_iter() for traversing outstanding commands
scsi: Remove cmd_list functionality

 drivers/scsi/aacraid/aachba.c   | 127 ++++++++++++++++++++++------------------
 drivers/scsi/aacraid/comminit.c |  29 ++++-----
 drivers/scsi/aacraid/commsup.c  |  37 +++++-------
 drivers/scsi/aacraid/linit.c    |  86 ++++++++++++++-------------
 drivers/scsi/dpt_i2o.c          |  28 ++++-----
 drivers/scsi/dpti.h             |   2 +-
 drivers/scsi/hosts.c            |  33 +++++++++++
 drivers/scsi/scsi.c             |  14 -----
 drivers/scsi/scsi_error.c       |   1 -
 drivers/scsi/scsi_lib.c         |  32 ----------
 drivers/scsi/scsi_priv.h        |   2 -
 drivers/scsi/scsi_scan.c        |   1 -
 include/scsi/scsi_cmnd.h        |   1 -
 include/scsi/scsi_device.h      |   1 -
 include/scsi/scsi_host.h        |   7 ++-
 15 files changed, 195 insertions(+), 206 deletions(-)
Signature · 1 line
2.16.4
#1 lore raw

PATCH v3 1/5 scsi: add scsi_host_busy_iter()

Add an iterator scsi_host_busy_iter() to traverse all busy commands. If locking against concurrent command completions is required it has to be provided by the caller.

---
 drivers/scsi/hosts.c     | 33 +++++++++++++++++++++++++++++++++
 include/scsi/scsi_host.h |  5 +++++
 2 files changed, 38 insertions(+)
drivers/scsi/hosts.c +33 -0
index 55522b7162d3..b32b5186d05e 100644
@@ -633,3 +633,36 @@ void scsi_flush_work(struct Scsi_Host *shost)
 	flush_workqueue(shost->work_q);
 }
 EXPORT_SYMBOL_GPL(scsi_flush_work);
+
+struct scsi_host_busy_iter_data {
+	scsi_host_busy_iter_fn *fn;
+	void *priv;
+};
+
+static bool __scsi_host_busy_iter_fn(struct request *req, void *priv,
+				   bool reserved)
+{
+	struct scsi_host_busy_iter_data *iter_data = priv;
+	struct scsi_cmnd *sc = blk_mq_rq_to_pdu(req);
+
+	return iter_data->fn(sc, iter_data->priv, reserved);
+}
+
+/**
+ * scsi_host_busy_iter - Iterate over all busy commands
+ * @shost:	Pointer to Scsi_Host.
+ * @fn:		Function to call on each busy command
+ * @priv:	Data pointer passed to @fn
+ **/
+void scsi_host_busy_iter(struct Scsi_Host *shost,
+			 scsi_host_busy_iter_fn *fn, void *priv)
+{
+	struct scsi_host_busy_iter_data iter_data = {
+		.fn = fn,
+		.priv = priv,
+	};
+
+	blk_mq_tagset_busy_iter(&shost->tag_set, __scsi_host_busy_iter_fn,
+				&iter_data);
+}
+EXPORT_SYMBOL_GPL(scsi_host_busy_iter);
include/scsi/scsi_host.h +5 -0
index 2c3f0c58869b..67386c5ac71e 100644
@@ -774,6 +774,11 @@ static inline int scsi_host_scan_allowed(struct Scsi_Host *shost)
 extern void scsi_unblock_requests(struct Scsi_Host *);
 extern void scsi_block_requests(struct Scsi_Host *);
 
+typedef bool (scsi_host_busy_iter_fn)(struct scsi_cmnd *, void *, bool);
+
+void scsi_host_busy_iter(struct Scsi_Host *,
+			 scsi_host_busy_iter_fn *fn, void *priv);
+
 struct class_container;
 
 /*
Signature · 1 line
2.16.4
#2 lore raw

PATCH v3 2/5 dpt_i2o: use midlayer tcq implementation

In reply to Hannes Reinecke

Switch to use the SCSI midlayer TCQ implementation and drop the use of the scsi command list.
And switch to use the SAM status codes while we're at it.

---
 drivers/scsi/dpt_i2o.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)
drivers/scsi/dpt_i2o.c +10 -13
index abc74fd474dc..f13e5d6649ae 100644
@@ -2335,7 +2335,6 @@ static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
 	host->unique_id = (u32)sys_tbl_pa + pHba->unit;
 	host->sg_tablesize = pHba->sg_tablesize;
 	host->can_queue = pHba->post_fifo_size;
-	host->use_cmd_list = 1;
 
 	return 0;
 }
@@ -2647,20 +2646,18 @@ static s32 adpt_i2o_reparse_lct(adpt_hba* pHba)
 	return 0;
 }
 
-static void adpt_fail_posted_scbs(adpt_hba* pHba)
+static bool fail_posted_scbs_iter(struct scsi_cmnd *cmd,
+				  void *data, bool reserved)
 {
-	struct scsi_cmnd* 	cmd = NULL;
-	struct scsi_device* 	d = NULL;
+	cmd->result = (DID_OK << 16) | SAM_STAT_TASK_SET_FULL;
+	cmd->scsi_done(cmd);
 
-	shost_for_each_device(d, pHba->host) {
-		unsigned long flags;
-		spin_lock_irqsave(&d->list_lock, flags);
-		list_for_each_entry(cmd, &d->cmd_list, list) {
-			cmd->result = (DID_OK << 16) | (QUEUE_FULL <<1);
-			cmd->scsi_done(cmd);
-		}
-		spin_unlock_irqrestore(&d->list_lock, flags);
-	}
+	return true;
+}
+
+static void adpt_fail_posted_scbs(adpt_hba* pHba)
+{
+	scsi_host_busy_iter(pHba->host, fail_posted_scbs_iter, NULL);
 }
 
 
Signature · 1 line
2.16.4
#3 lore raw

Re: [PATCH 2/5] dpt_i2o: use midlayer tcq implementation

drivers/scsi/dpt_i2o.c static s32 adpt_i2o_reparse_lct(adpt_hba* pHba) · line 2660

Quoted 9 lines · Hannes Reinecke
drivers/scsi/dpt_i2o.c +8 -0
+	cmd->result = (DID_OK << 16) | SAM_STAT_TASK_SET_FULL;
+	cmd->scsi_done(cmd);
 
+	return true;
+}
+
+static void adpt_fail_posted_scbs(adpt_hba* pHba)
+{
+	scsi_host_busy_iter(pHba->host, fail_posted_scbs_iter, NULL);

I still think that SAM_STAT_TASK_SET_FULL is a very strange error here, and that we should have a helper like adpt_fail_posted_scbs in the core SCSI code. Also your * placement is wrong above.

#4 lore raw

Re: [PATCH 2/5] dpt_i2o: use midlayer tcq implementation

Quoted 4 lines · Christoph Hellwig
Quoted 3 lines · Hannes Reinecke
drivers/scsi/dpt_i2o.c +2 -0
+	cmd->result = (DID_OK << 16) | SAM_STAT_TASK_SET_FULL;
+	cmd->scsi_done(cmd);
Quoted 11 lines

drivers/scsi/dpt_i2o.c static s32 adpt_i2o_reparse_lct(adpt_hba* pHba) · line 2660

Quoted 6 lines
drivers/scsi/dpt_i2o.c +6 -0
+	return true;
+}
+
+static void adpt_fail_posted_scbs(adpt_hba* pHba)
+{
+	scsi_host_busy_iter(pHba->host, fail_posted_scbs_iter, NULL);

I still think that SAM_STAT_TASK_SET_FULL is a very strange error here, and that we should have a helper like adpt_fail_posted_scbs in the core SCSI code. Also your * placement is wrong above.

Ok, will do so.

Cheers,

Hannes

Signature · 5 lines
Dr. Hannes Reinecke            Teamlead Storage & Networking
[email protected]                              +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
#5 lore raw

PATCH v3 3/5 dpt_i2o: rename adpt_i2o_to_scsi() to adpt_i2o_scsi_complete()

In reply to Hannes Reinecke

Rename the badly named function into adpt_i2o_scsi_complete(), and make it a void function as the return value is never used. This also fixes a potential use-after free as the return value might be evaluated from the command result after the command has been freed.

---
 drivers/scsi/dpt_i2o.c | 5 ++---
 drivers/scsi/dpti.h    | 2 +-
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/scsi/dpt_i2o.c +2 -3
index f13e5d6649ae..06ec090d5c46 100644
@@ -2173,7 +2173,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
 						 readl(reply + 12) - 1);
 			if(cmd != NULL){
 				scsi_dma_unmap(cmd);
-				adpt_i2o_to_scsi(reply, cmd);
+				adpt_i2o_scsi_complete(reply, cmd);
 			}
 		}
 		writel(m, pHba->reply_port);
@@ -2340,7 +2340,7 @@ static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
 }
 
 
-static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
+static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd)
 {
 	adpt_hba* pHba;
 	u32 hba_status;
@@ -2458,7 +2458,6 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
 	if(cmd->scsi_done != NULL){
 		cmd->scsi_done(cmd);
 	} 
-	return cmd->result;
 }
 
 
drivers/scsi/dpti.h +1 -1
index 42b1e28b5884..3ec391134bb0 100644
@@ -286,7 +286,7 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba);
 static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba);
 static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
 static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
-static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
+static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd);
 static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
 static s32 adpt_hba_reset(adpt_hba* pHba);
 static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
Signature · 1 line
2.16.4
#6 lore raw

PATCH v3 4/5 aacraid: use scsi_host_busy_iter() for traversing outstanding commands

In reply to Hannes Reinecke

Use scsi_host_busy_iter() for traversing outstanding commands and drop the cmd_list usage.

---
 drivers/scsi/aacraid/aachba.c   | 127 ++++++++++++++++++++++------------------
 drivers/scsi/aacraid/comminit.c |  29 ++++-----
 drivers/scsi/aacraid/commsup.c  |  37 +++++-------
 drivers/scsi/aacraid/linit.c    |  86 ++++++++++++++-------------
 4 files changed, 144 insertions(+), 135 deletions(-)
drivers/scsi/aacraid/aachba.c +71 -56
index e36608ce937a..4e9a28fe5e6d 100644
@@ -2639,81 +2639,96 @@ static void synchronize_callback(void *context, struct fib *fibptr)
 	cmd->scsi_done(cmd);
 }
 
+struct synchronize_busy_data {
+	struct scsi_device *sdev;
+	u64 lba;
+	u32 count;
+	int active;
+};
+
+static bool synchronize_busy_iter(struct scsi_cmnd *cmd,
+				  void *data, bool reserved)
+{
+	struct synchronize_busy_data *busy_data = data;
+
+	if (busy_data->sdev == cmd->device &&
+	    cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
+		u64 cmnd_lba;
+		u32 cmnd_count;
+
+		if (cmd->cmnd[0] == WRITE_6) {
+			cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
+				(cmd->cmnd[2] << 8) |
+				cmd->cmnd[3];
+			cmnd_count = cmd->cmnd[4];
+			if (cmnd_count == 0)
+				cmnd_count = 256;
+		} else if (cmd->cmnd[0] == WRITE_16) {
+			cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
+				((u64)cmd->cmnd[3] << 48) |
+				((u64)cmd->cmnd[4] << 40) |
+				((u64)cmd->cmnd[5] << 32) |
+				((u64)cmd->cmnd[6] << 24) |
+				(cmd->cmnd[7] << 16) |
+				(cmd->cmnd[8] << 8) |
+				cmd->cmnd[9];
+			cmnd_count = (cmd->cmnd[10] << 24) |
+				(cmd->cmnd[11] << 16) |
+				(cmd->cmnd[12] << 8) |
+				cmd->cmnd[13];
+		} else if (cmd->cmnd[0] == WRITE_12) {
+			cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
+				(cmd->cmnd[3] << 16) |
+				(cmd->cmnd[4] << 8) |
+				cmd->cmnd[5];
+			cmnd_count = (cmd->cmnd[6] << 24) |
+				(cmd->cmnd[7] << 16) |
+				(cmd->cmnd[8] << 8) |
+				cmd->cmnd[9];
+		} else if (cmd->cmnd[0] == WRITE_10) {
+			cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
+				(cmd->cmnd[3] << 16) |
+				(cmd->cmnd[4] << 8) |
+				cmd->cmnd[5];
+			cmnd_count = (cmd->cmnd[7] << 8) |
+				cmd->cmnd[8];
+		} else
+			return true;
+		if (((cmnd_lba + cmnd_count) < busy_data->lba) ||
+		    (busy_data->count && ((busy_data->lba + busy_data->count) < cmnd_lba)))
+			return true;
+		++busy_data->active;
+	}
+	return true;
+}
+
 static int aac_synchronize(struct scsi_cmnd *scsicmd)
 {
 	int status;
 	struct fib *cmd_fibcontext;
 	struct aac_synchronize *synchronizecmd;
-	struct scsi_cmnd *cmd;
 	struct scsi_device *sdev = scsicmd->device;
-	int active = 0;
 	struct aac_dev *aac;
 	u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) |
 		(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
 	u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
-	unsigned long flags;
+	struct synchronize_busy_data busy_data = {
+		.sdev = sdev,
+		.lba = lba,
+		.count = count,
+		.active = 0,
+	};
 
 	/*
 	 * Wait for all outstanding queued commands to complete to this
 	 * specific target (block).
 	 */
-	spin_lock_irqsave(&sdev->list_lock, flags);
-	list_for_each_entry(cmd, &sdev->cmd_list, list)
-		if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
-			u64 cmnd_lba;
-			u32 cmnd_count;
-
-			if (cmd->cmnd[0] == WRITE_6) {
-				cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
-					(cmd->cmnd[2] << 8) |
-					cmd->cmnd[3];
-				cmnd_count = cmd->cmnd[4];
-				if (cmnd_count == 0)
-					cmnd_count = 256;
-			} else if (cmd->cmnd[0] == WRITE_16) {
-				cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
-					((u64)cmd->cmnd[3] << 48) |
-					((u64)cmd->cmnd[4] << 40) |
-					((u64)cmd->cmnd[5] << 32) |
-					((u64)cmd->cmnd[6] << 24) |
-					(cmd->cmnd[7] << 16) |
-					(cmd->cmnd[8] << 8) |
-					cmd->cmnd[9];
-				cmnd_count = (cmd->cmnd[10] << 24) |
-					(cmd->cmnd[11] << 16) |
-					(cmd->cmnd[12] << 8) |
-					cmd->cmnd[13];
-			} else if (cmd->cmnd[0] == WRITE_12) {
-				cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
-					(cmd->cmnd[3] << 16) |
-					(cmd->cmnd[4] << 8) |
-					cmd->cmnd[5];
-				cmnd_count = (cmd->cmnd[6] << 24) |
-					(cmd->cmnd[7] << 16) |
-					(cmd->cmnd[8] << 8) |
-					cmd->cmnd[9];
-			} else if (cmd->cmnd[0] == WRITE_10) {
-				cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
-					(cmd->cmnd[3] << 16) |
-					(cmd->cmnd[4] << 8) |
-					cmd->cmnd[5];
-				cmnd_count = (cmd->cmnd[7] << 8) |
-					cmd->cmnd[8];
-			} else
-				continue;
-			if (((cmnd_lba + cmnd_count) < lba) ||
-			  (count && ((lba + count) < cmnd_lba)))
-				continue;
-			++active;
-			break;
-		}
-
-	spin_unlock_irqrestore(&sdev->list_lock, flags);
+	scsi_host_busy_iter(sdev->host, synchronize_busy_iter, &busy_data);
 
 	/*
 	 *	Yield the processor (requeue for later)
 	 */
-	if (active)
+	if (busy_data.active)
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 
 	aac = (struct aac_dev *)sdev->host->hostdata;
drivers/scsi/aacraid/comminit.c +12 -17
index f75878d773cf..bcd2f685dfb9 100644
@@ -272,29 +272,24 @@ static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem,
 	q->entries = qsize;
 }
 
+static bool wait_for_io_iter(struct scsi_cmnd *cmd, void *data, bool reserved)
+{
+	int *active = data;
+
+	if (cmd->SCp.phase == AAC_OWNER_FIRMWARE)
+		*active = 1;
+	return true;
+}
+
 static void aac_wait_for_io_completion(struct aac_dev *aac)
 {
-	unsigned long flagv = 0;
-	int i = 0;
+	int i;
 
 	for (i = 60; i; --i) {
-		struct scsi_device *dev;
-		struct scsi_cmnd *command;
 		int active = 0;
 
-		__shost_for_each_device(dev, aac->scsi_host_ptr) {
-			spin_lock_irqsave(&dev->list_lock, flagv);
-			list_for_each_entry(command, &dev->cmd_list, list) {
-				if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
-					active++;
-					break;
-				}
-			}
-			spin_unlock_irqrestore(&dev->list_lock, flagv);
-			if (active)
-				break;
-
-		}
+		scsi_host_busy_iter(aac->scsi_host_ptr,
+				    wait_for_io_iter, &active);
 		/*
 		 * We can exit If all the commands are complete
 		 */
drivers/scsi/aacraid/commsup.c +15 -22
index 5a8a999606ea..1b908f07848d 100644
@@ -1472,14 +1472,25 @@ static void aac_schedule_bus_scan(struct aac_dev *aac)
 		aac_schedule_src_reinit_aif_worker(aac);
 }
 
+static bool reset_adapter_iter(struct scsi_cmnd *command,
+			       void *data, bool reserved)
+{
+	if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
+		command->result = DID_OK << 16
+		  | COMMAND_COMPLETE << 8
+		  | SAM_STAT_TASK_SET_FULL;
+		command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+		command->scsi_done(command);
+	}
+	return true;
+}
+
 static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 {
 	int index, quirks;
 	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
-	struct scsi_cmnd *command;
-	struct scsi_cmnd *command_list;
 	int jafo = 0;
 	int bled;
 	u64 dmamask;
@@ -1607,26 +1618,8 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 	 * This is where the assumption that the Adapter is quiesced
 	 * is important.
 	 */
-	command_list = NULL;
-	__shost_for_each_device(dev, host) {
-		unsigned long flags;
-		spin_lock_irqsave(&dev->list_lock, flags);
-		list_for_each_entry(command, &dev->cmd_list, list)
-			if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
-				command->SCp.buffer = (struct scatterlist *)command_list;
-				command_list = command;
-			}
-		spin_unlock_irqrestore(&dev->list_lock, flags);
-	}
-	while ((command = command_list)) {
-		command_list = (struct scsi_cmnd *)command->SCp.buffer;
-		command->SCp.buffer = NULL;
-		command->result = DID_OK << 16
-		  | COMMAND_COMPLETE << 8
-		  | SAM_STAT_TASK_SET_FULL;
-		command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
-		command->scsi_done(command);
-	}
+	scsi_host_busy_iter(host, reset_adapter_iter, NULL);
+
 	/*
 	 * Any Device that was already marked offline needs to be marked
 	 * running
drivers/scsi/aacraid/linit.c +46 -40

107 lines not on this page · raw message

Signature · 1 line
2.16.4
#7 lore raw

Re: [PATCH 4/5] aacraid: use scsi_host_busy_iter() for traversing outstanding commands

Quoted 2 lines · Hannes Reinecke

Use scsi_host_busy_iter() for traversing outstanding commands and drop the cmd_list usage.

This is missing all the feedback from last time, no maintainers are Cced, it is not split up and properly documented, etc. It is still reverse engineering the scsi commands instead of looking at the block request.

And while looking at this again, I think the iteration in aac_synchronize should simply be removed without a replacement. Cache flushes in the Linux block layer and in SCSI have always only been for complete commands, not for in-flight commands. So unless the hardware has a weird quirk this code should just go away. Which is another reason to add the maintainers at the hardware vendor, as they can help with insights.

#8 lore raw

PATCH v3 5/5 scsi: Remove cmd_list functionality

In reply to Hannes Reinecke

Remove cmd_list functionality; no users left. With that the scsi_put_command() becomes empty, so remove that one, too.

---
 drivers/scsi/scsi.c        | 14 --------------
 drivers/scsi/scsi_error.c  |  1 -
 drivers/scsi/scsi_lib.c    | 32 --------------------------------
 drivers/scsi/scsi_priv.h   |  2 --
 drivers/scsi/scsi_scan.c   |  1 -
 include/scsi/scsi_cmnd.h   |  1 -
 include/scsi/scsi_device.h |  1 -
 include/scsi/scsi_host.h   |  2 --
 8 files changed, 54 deletions(-)
drivers/scsi/scsi.c +0 -14
index 4f76841a7038..ae7a1adfa551 100644
@@ -94,20 +94,6 @@ EXPORT_SYMBOL(scsi_logging_level);
 ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
 EXPORT_SYMBOL(scsi_sd_pm_domain);
 
-/**
- * scsi_put_command - Free a scsi command block
- * @cmd: command block to free
- *
- * Returns:	Nothing.
- *
- * Notes:	The command must not belong to any lists.
- */
-void scsi_put_command(struct scsi_cmnd *cmd)
-{
-	scsi_del_cmd_from_list(cmd);
-	BUG_ON(delayed_work_pending(&cmd->abort_work));
-}
-
 #ifdef CONFIG_SCSI_LOGGING
 void scsi_log_send(struct scsi_cmnd *cmd)
 {
drivers/scsi/scsi_error.c +0 -1
index ae2fa170f6ad..978be1602f71 100644
@@ -2412,7 +2412,6 @@ scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
 	wake_up(&shost->host_wait);
 	scsi_run_host_queues(shost);
 
-	scsi_put_command(scmd);
 	kfree(rq);
 
 out_put_autopm_host:
drivers/scsi/scsi_lib.c +0 -32
index dc210b9d4896..6b957531aaf0 100644
@@ -565,7 +565,6 @@ static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
 {
 	scsi_mq_free_sgtables(cmd);
 	scsi_uninit_cmd(cmd);
-	scsi_del_cmd_from_list(cmd);
 }
 
 /* Returns false when no more bytes to process, true if there are more */
@@ -1101,35 +1100,6 @@ static void scsi_cleanup_rq(struct request *rq)
 	}
 }
 
-/* Add a command to the list used by the aacraid and dpt_i2o drivers */
-void scsi_add_cmd_to_list(struct scsi_cmnd *cmd)
-{
-	struct scsi_device *sdev = cmd->device;
-	struct Scsi_Host *shost = sdev->host;
-	unsigned long flags;
-
-	if (shost->use_cmd_list) {
-		spin_lock_irqsave(&sdev->list_lock, flags);
-		list_add_tail(&cmd->list, &sdev->cmd_list);
-		spin_unlock_irqrestore(&sdev->list_lock, flags);
-	}
-}
-
-/* Remove a command from the list used by the aacraid and dpt_i2o drivers */
-void scsi_del_cmd_from_list(struct scsi_cmnd *cmd)
-{
-	struct scsi_device *sdev = cmd->device;
-	struct Scsi_Host *shost = sdev->host;
-	unsigned long flags;
-
-	if (shost->use_cmd_list) {
-		spin_lock_irqsave(&sdev->list_lock, flags);
-		BUG_ON(list_empty(&cmd->list));
-		list_del_init(&cmd->list);
-		spin_unlock_irqrestore(&sdev->list_lock, flags);
-	}
-}
-
 /* Called after a request has been started. */
 void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 {
@@ -1158,8 +1128,6 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
 	INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
 	cmd->jiffies_at_alloc = jiffies_at_alloc;
 	cmd->retries = retries;
-
-	scsi_add_cmd_to_list(cmd);
 }
 
 static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev,
drivers/scsi/scsi_priv.h +0 -2
index cc2859d76d81..88b6ef2cc94d 100644
@@ -84,8 +84,6 @@ int scsi_eh_get_sense(struct list_head *work_q,
 int scsi_noretry_cmd(struct scsi_cmnd *scmd);
 
 /* scsi_lib.c */
-extern void scsi_add_cmd_to_list(struct scsi_cmnd *cmd);
-extern void scsi_del_cmd_from_list(struct scsi_cmnd *cmd);
 extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
 extern void scsi_device_unbusy(struct scsi_device *sdev);
 extern void scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
drivers/scsi/scsi_scan.c +0 -1
index 058079f915f1..f2437a7570ce 100644
@@ -236,7 +236,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	sdev->sdev_state = SDEV_CREATED;
 	INIT_LIST_HEAD(&sdev->siblings);
 	INIT_LIST_HEAD(&sdev->same_target_siblings);
-	INIT_LIST_HEAD(&sdev->cmd_list);
 	INIT_LIST_HEAD(&sdev->starved_entry);
 	INIT_LIST_HEAD(&sdev->event_list);
 	spin_lock_init(&sdev->list_lock);
include/scsi/scsi_cmnd.h +0 -1
index 91bd749a02f7..134686e27005 100644
@@ -158,7 +158,6 @@ static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
 	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
 }
 
-extern void scsi_put_command(struct scsi_cmnd *);
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
 
 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
include/scsi/scsi_device.h +0 -1
index 3ed836db5306..fd2aee1f59fc 100644
@@ -110,7 +110,6 @@ struct scsi_device {
 	atomic_t device_blocked;	/* Device returned QUEUE_FULL. */
 
 	spinlock_t list_lock;
-	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
 	struct list_head starved_entry;
 	unsigned short queue_depth;	/* How deep of a queue we want */
 	unsigned short max_queue_depth;	/* max queue depth */
include/scsi/scsi_host.h +0 -2
index 67386c5ac71e..b8a3d80ca4ed 100644
@@ -641,8 +641,6 @@ struct Scsi_Host {
 	/* The controller does not support WRITE SAME */
 	unsigned no_write_same:1;
 
-	unsigned use_cmd_list:1;
-
 	/* Host responded with short (<36 bytes) INQUIRY result */
 	unsigned short_inquiry:1;
 
Signature · 1 line
2.16.4