Skip to contentSkip to conversation

What is the difference between ARCH_XXX MACH_XXX TARGET_XXX macros

DISCUSSION Tim Williams 2 participants 2 messages Dec 4, 2019

lore
Share & tools
lore
#0 lore raw

Hello, I am trying to port u-boot to a new board,

There are several macros, how to use them properly?

CONFIG_ARCH_XXX
CONFIG_MACH_XXX
CONFIG_TARGET_XXX

for example, my board has:

SoC: LS2K1000
ISA: MIPS32r1, MIPS32r2, MIPS64r1, MIPS64r2
Board: UselessRouter or HelloRouter, TBD
NIC: 4 1000Mbps NIC(No built in switcher)

thanks very much!

Regards,
Tim

#1 lore raw
Quoted 8 lines · Tim Williams

Hello, I am trying to port u-boot to a new board,

There are several macros, how to use them properly?

CONFIG_ARCH_XXX
CONFIG_MACH_XXX
CONFIG_TARGET_XXX

Quoted 6 lines

for example, my board has:

SoC: LS2K1000
ISA: MIPS32r1, MIPS32r2, MIPS64r1, MIPS64r2
Board: UselessRouter or HelloRouter, TBD
NIC: 4 1000Mbps NIC(No built in switcher)

Code that is generic to LS2K1000 but not your boards should use CONFIG_SOC_xxx and everything board-specific should be CONFIG_TARGET_xxx. CONFIG_ARCH_xxx / CONFIG_MACH_xxx should get used likely sparingly, but we are indeed inconsistent and could use CONFIG_SOC_xxx in some of those cases.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191204/bf4404a8/attachment.sig>