What is the difference between ARCH_XXX MACH_XXX TARGET_XXX macros
Hello, I am trying to port u-boot to a new board,
There are several macros, how to use them properly?
CONFIG_ARCH_XXX
CONFIG_MACH_XXX
CONFIG_TARGET_XXX
for example, my board has:
SoC: LS2K1000
ISA: MIPS32r1, MIPS32r2, MIPS64r1, MIPS64r2
Board: UselessRouter or HelloRouter, TBD
NIC: 4 1000Mbps NIC(No built in switcher)
thanks very much!
Regards,
Tim
Quoted 8 lines · Tim Williams
Hello, I am trying to port u-boot to a new board,
There are several macros, how to use them properly?
CONFIG_ARCH_XXX
CONFIG_MACH_XXX
CONFIG_TARGET_XXX
Quoted 6 lines
for example, my board has:
SoC: LS2K1000
ISA: MIPS32r1, MIPS32r2, MIPS64r1, MIPS64r2
Board: UselessRouter or HelloRouter, TBD
NIC: 4 1000Mbps NIC(No built in switcher)
Code that is generic to LS2K1000 but not your boards should use CONFIG_SOC_xxx and everything board-specific should be CONFIG_TARGET_xxx. CONFIG_ARCH_xxx / CONFIG_MACH_xxx should get used likely sparingly, but we are indeed inconsistent and could use CONFIG_SOC_xxx in some of those cases.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191204/bf4404a8/attachment.sig>