Skip to contentSkip to conversation

net: Drop legacy "name" from -net and remove NetLegacy

PATCH Superseded Thomas Huth 3 participants 10 messages Dec 6, 2019 – Jan 29, 2020 Networking

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#1 lore raw

PATCH 1/2 net: Drop the legacy "name" parameter from the -net option

In reply to Thomas Huth

It's been deprecated since QEMU v3.1, so it's time to finally remove it. The "id" parameter can simply be used instead.

---
 net/net.c            | 10 +---------
 qapi/net.json        |  4 +---
 qemu-deprecated.texi | 12 +++++++-----
 3 files changed, 9 insertions(+), 17 deletions(-)
net/net.c +1 -9
index 84aa6d8d00..ee4a76eb3e 100644
@@ -969,12 +969,10 @@ static int net_client_init1(const void *object, bool is_netdev, Error **errp)
 {
     Netdev legacy = {0};
     const Netdev *netdev;
-    const char *name;
     NetClientState *peer = NULL;
 
     if (is_netdev) {
         netdev = object;
-        name = netdev->id;
 
         if (netdev->type == NET_CLIENT_DRIVER_NIC ||
             !net_client_init_fun[netdev->type]) {
@@ -987,12 +985,6 @@ static int net_client_init1(const void *object, bool is_netdev, Error **errp)
         const NetLegacyOptions *opts = net->opts;
         legacy.id = net->id;
         netdev = &legacy;
-        /* missing optional values have been initialized to "all bits zero" */
-        name = net->has_id ? net->id : net->name;
-
-        if (net->has_name) {
-            warn_report("The 'name' parameter is deprecated, use 'id' instead");
-        }
 
         /* Map the old options to the new flat type */
         switch (opts->type) {
@@ -1052,7 +1044,7 @@ static int net_client_init1(const void *object, bool is_netdev, Error **errp)
         }
     }
 
-    if (net_client_init_fun[netdev->type](netdev, name, peer, errp) < 0) {
+    if (net_client_init_fun[netdev->type](netdev, netdev->id, peer, errp) < 0) {
         /* FIXME drop when all init functions store an Error */
         if (errp && !*errp) {
             error_setg(errp, QERR_DEVICE_INIT_FAILED,
qapi/net.json +1 -3
index 335295be50..ff280ccd16 100644
@@ -488,18 +488,16 @@
 #
 # @id: identifier for monitor commands
 #
-# @name: identifier for monitor commands, ignored if @id is present
-#
 # @opts: device type specific properties (legacy)
 #
 # Since: 1.2
 #
 # 'vlan': dropped in 3.0
+# 'name': dropped in 5.0
 ##
 { 'struct': 'NetLegacy',
   'data': {
     '*id':   'str',
-    '*name': 'str',
     'opts':  'NetLegacyOptions' } }
 
 ##
qemu-deprecated.texi +7 -5
index 2850f9a520..2f9efb45ba 100644
@@ -42,11 +42,6 @@ The 'file' driver for drives is no longer appropriate for character or host
 devices and will only accept regular files (S_IFREG). The correct driver
 for these file types is 'host_cdrom' or 'host_device' as appropriate.
 
-@subsection -net ...,name=@var{name} (since 3.1)
-
-The @option{name} parameter of the @option{-net} option is a synonym
-for the @option{id} parameter, which should now be used instead.
-
 @subsection -smp (invalid topologies) (since 3.1)
 
 CPU topology properties should describe whole machine topology including
@@ -371,6 +366,13 @@ What follows is a record of recently removed, formerly deprecated
 features that serves as a record for users who have encountered
 trouble after a recent upgrade.
 
+@section System emulator command line arguments
+
+@subsection -net ...,name=@var{name} (removed in 5.0)
+
+The @option{name} parameter of the @option{-net} option was a synonym
+for the @option{id} parameter, which should now be used instead.
+
 @section Human Monitor Protocol (HMP) commands
 
 @subsection The hub_id parameter of 'hostfwd_add' / 'hostfwd_remove' (removed in 5.0)
Signature · 1 line
2.18.1
#5 lore raw

PATCH 2/2 net: Drop the NetLegacy structure, always use Netdev instead

In reply to Thomas Huth

Now that the "name" parameter is gone, there is hardly any difference between NetLegacy and Netdev anymore. Drop NetLegacy and always use Netdev to simplify the code quite a bit.

---
 net/net.c     | 74 ++++++++-------------------------------------------
 qapi/net.json | 51 +----------------------------------
 2 files changed, 12 insertions(+), 113 deletions(-)
net/net.c +11 -63
index ee4a76eb3e..cfe524b4d1 100644
@@ -967,13 +967,14 @@ static int (* const net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
 
 static int net_client_init1(const void *object, bool is_netdev, Error **errp)
 {
-    Netdev legacy = {0};
-    const Netdev *netdev;
+    const Netdev *netdev = object;
     NetClientState *peer = NULL;
 
     if (is_netdev) {
-        netdev = object;
-
+        if (!netdev->has_id) {
+            error_setg(errp, QERR_MISSING_PARAMETER, "id");
+            return -1;
+        }
         if (netdev->type == NET_CLIENT_DRIVER_NIC ||
             !net_client_init_fun[netdev->type]) {
             error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
@@ -981,56 +982,11 @@ static int net_client_init1(const void *object, bool is_netdev, Error **errp)
             return -1;
         }
     } else {
-        const NetLegacy *net = object;
-        const NetLegacyOptions *opts = net->opts;
-        legacy.id = net->id;
-        netdev = &legacy;
-
-        /* Map the old options to the new flat type */
-        switch (opts->type) {
-        case NET_LEGACY_OPTIONS_TYPE_NONE:
+        if (netdev->type == NET_CLIENT_DRIVER_NONE) {
             return 0; /* nothing to do */
-        case NET_LEGACY_OPTIONS_TYPE_NIC:
-            legacy.type = NET_CLIENT_DRIVER_NIC;
-            legacy.u.nic = opts->u.nic;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_USER:
-            legacy.type = NET_CLIENT_DRIVER_USER;
-            legacy.u.user = opts->u.user;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_TAP:
-            legacy.type = NET_CLIENT_DRIVER_TAP;
-            legacy.u.tap = opts->u.tap;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_L2TPV3:
-            legacy.type = NET_CLIENT_DRIVER_L2TPV3;
-            legacy.u.l2tpv3 = opts->u.l2tpv3;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_SOCKET:
-            legacy.type = NET_CLIENT_DRIVER_SOCKET;
-            legacy.u.socket = opts->u.socket;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_VDE:
-            legacy.type = NET_CLIENT_DRIVER_VDE;
-            legacy.u.vde = opts->u.vde;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_BRIDGE:
-            legacy.type = NET_CLIENT_DRIVER_BRIDGE;
-            legacy.u.bridge = opts->u.bridge;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_NETMAP:
-            legacy.type = NET_CLIENT_DRIVER_NETMAP;
-            legacy.u.netmap = opts->u.netmap;
-            break;
-        case NET_LEGACY_OPTIONS_TYPE_VHOST_USER:
-            legacy.type = NET_CLIENT_DRIVER_VHOST_USER;
-            legacy.u.vhost_user = opts->u.vhost_user;
-            break;
-        default:
-            abort();
         }
-
-        if (!net_client_init_fun[netdev->type]) {
+        if (netdev->type == NET_CLIENT_DRIVER_HUBPORT ||
+            !net_client_init_fun[netdev->type]) {
             error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
                        "a net backend type (maybe it is not compiled "
                        "into this binary)");
@@ -1039,7 +995,7 @@ static int net_client_init1(const void *object, bool is_netdev, Error **errp)
 
         /* Do not add to a hub if it's a nic with a netdev= parameter. */
         if (netdev->type != NET_CLIENT_DRIVER_NIC ||
-            !opts->u.nic.has_netdev) {
+            !netdev->u.nic.has_netdev) {
             peer = net_hub_add_port(0, NULL, NULL);
         }
     }
@@ -1137,21 +1093,13 @@ static int net_client_init(QemuOpts *opts, bool is_netdev, Error **errp)
         }
     }
 
-    if (is_netdev) {
-        visit_type_Netdev(v, NULL, (Netdev **)&object, &err);
-    } else {
-        visit_type_NetLegacy(v, NULL, (NetLegacy **)&object, &err);
-    }
+    visit_type_Netdev(v, NULL, (Netdev **)&object, &err);
 
     if (!err) {
         ret = net_client_init1(object, is_netdev, &err);
     }
 
-    if (is_netdev) {
-        qapi_free_Netdev(object);
-    } else {
-        qapi_free_NetLegacy(object);
-    }
+    qapi_free_Netdev(object);
 
 out:
     error_propagate(errp, err);
qapi/net.json +1 -50

63 lines not on this page · raw message

Signature · 1 line
2.18.1
#0 lore raw

cover net: Drop legacy "name" from -net and remove NetLegacy

It's time to remove the deprecated "name" parameter from -net.

Please have a closer look at the second patch ... I think it should be fine, but I'm not 100% sure whether it's ok for all cases to drop NetLegacy, so please double-check.

Thomas Huth (2):
net: Drop the legacy "name" parameter from the -net option
net: Drop the NetLegacy structure, always use Netdev instead

 net/net.c            | 84 +++++++-------------------------------------
 qapi/net.json        | 53 +---------------------------
 qemu-deprecated.texi | 12 ++++---
 3 files changed, 20 insertions(+), 129 deletions(-)
Signature · 1 line
2.18.1
#6 lore raw

Re: [PATCH 2/2] net: Drop the NetLegacy structure, always use Netdev instead

In reply to Thomas Huth
Quoted 6 lines · Thomas Huth

Now that the "name" parameter is gone, there is hardly any difference between NetLegacy and Netdev anymore. Drop NetLegacy and always use Netdev to simplify the code quite a bit.

---

Initial focus on the QAPI change:

qapi/net.json line 470

Quoted 7 lines

+++ b/qapi/net.json

qapi/net.json +1 -1
@@ -467,7 +467,7 @@
  # 'l2tpv3' - since 2.1
  ##
  { 'union': 'Netdev',
-  'base': { 'id': 'str', 'type': 'NetClientDriver' },
+  'base': { '*id': 'str', 'type': 'NetClientDriver' },

Making id optional here...

Quoted 15 lines
qapi/net.json +0 -8
    'discriminator': 'type',
    'data': {
      'nic':      'NetLegacyNicOptions',
@@ -481,55 +481,6 @@
      'netmap':   'NetdevNetmapOptions',
      'vhost-user': 'NetdevVhostUserOptions' } }
 
-##
-# @NetLegacy:
-#
-# Captures the configuration of a network device; legacy.
-#
-# @id: identifier for monitor commands
-#
-# @opts: device type specific properties (legacy)

qapi/net.json line 501

Quoted 10 lines
qapi/net.json +0 -10
-#
-# Since: 1.2
-#
-# 'vlan': dropped in 3.0
-# 'name': dropped in 5.0
-##
-{ 'struct': 'NetLegacy',
-  'data': {
-    '*id':   'str',
-    'opts':  'NetLegacyOptions' } }

to match how it was here. Should 'id' have been made mandatory in 1/2, when deleting 'name' (after all, id was optional only when name was in use)?

qapi/net.json line 510

Quoted 9 lines
qapi/net.json +0 -9
-
-##
-# @NetLegacyOptionsType:
-#
-# Since: 1.2
-##
-{ 'enum': 'NetLegacyOptionsType',
-  'data': ['none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
-           'bridge', 'netmap', 'vhost-user'] }

Comparing this to the branches of Netdev:

We are losing 'none', while gaining 'hubport'. The gain is not problematic, and I guess you are declaring that the use of 'none' has been deprecated long enough to not be a problem.

qapi/net.json line 523

Quoted 13 lines
qapi/net.json +0 -13
-
-##
-# @NetLegacyOptions:
-#
-# Like Netdev, but for use only by the legacy command line options
-#
-# Since: 1.2
-##
-{ 'union': 'NetLegacyOptions',
-  'base': { 'type': 'NetLegacyOptionsType' },
-  'discriminator': 'type',
-  'data': {
-    'nic':      'NetLegacyNicOptions',

Should we rename this to NetdevNicOptions, now that we are getting rid of other NetLegacy names?

qapi/net.json line 531

Quoted 8 lines
qapi/net.json +0 -8
-    'user':     'NetdevUserOptions',
-    'tap':      'NetdevTapOptions',
-    'l2tpv3':   'NetdevL2TPv3Options',
-    'socket':   'NetdevSocketOptions',
-    'vde':      'NetdevVdeOptions',
-    'bridge':   'NetdevBridgeOptions',
-    'netmap':   'NetdevNetmapOptions',
-    'vhost-user': 'NetdevVhostUserOptions' } }

But I concur that all branches of the Netdev union have the same types as what you are removing here from NetLegacyOptions, so the consolidation looks sane.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] net: Drop the legacy "name" parameter from the -net option

In reply to Thomas Huth
Quoted 10 lines · Thomas Huth

It's been deprecated since QEMU v3.1, so it's time to finally remove it. The "id" parameter can simply be used instead.

---
  net/net.c            | 10 +---------
  qapi/net.json        |  4 +---
  qemu-deprecated.texi | 12 +++++++-----
  3 files changed, 9 insertions(+), 17 deletions(-)

A quick grep of 'name.*netdev' and 'netdev.*name' in libvirt did not seem to find any uses of the deprecated syntax.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org
#7 lore raw

Re: [PATCH 2/2] net: Drop the NetLegacy structure, always use Netdev instead

In reply to Eric Blake
Quoted 40 lines · Eric Blake
Quoted 6 lines · Thomas Huth

Now that the "name" parameter is gone, there is hardly any difference between NetLegacy and Netdev anymore. Drop NetLegacy and always use Netdev to simplify the code quite a bit.

---

Initial focus on the QAPI change:

qapi/net.json line 470

Quoted 7 lines

+++ b/qapi/net.json

qapi/net.json +1 -1
@@ -467,7 +467,7 @@
   # 'l2tpv3' - since 2.1
   ##
   { 'union': 'Netdev',
-  'base': { 'id': 'str', 'type': 'NetClientDriver' },
+  'base': { '*id': 'str', 'type': 'NetClientDriver' },

Making id optional here...

Quoted 20 lines
qapi/net.json +0 -0
     'discriminator': 'type',
     'data': {
       'nic':      'NetLegacyNicOptions',
@@ -481,55 +481,6 @@
       'netmap':   'NetdevNetmapOptions',
       'vhost-user': 'NetdevVhostUserOptions' } }

  -##

qapi/net.json +0 -13
-# @NetLegacy:
-#
-# Captures the configuration of a network device; legacy.
-#
-# @id: identifier for monitor commands
-#
-# @opts: device type specific properties (legacy)
-#
-# Since: 1.2
-#
-# 'vlan': dropped in 3.0
-# 'name': dropped in 5.0
-##
Quoted 8 lines
Quoted 4 lines

-{ 'struct': 'NetLegacy',
-  'data': {
-    '*id':   'str',
-    'opts':  'NetLegacyOptions' } }

to match how it was here.  Should 'id' have been made mandatory in 1/2, when deleting 'name' (after all, id was optional only when name was in use)?

No, since "id" is still not mandatory for "-net". In case it is missing, the code creates an id internally (see assign_name() in net/net.c).

Quoted 12 lines

qapi/net.json line 510

Quoted 9 lines
qapi/net.json +0 -9
-
-##
-# @NetLegacyOptionsType:
-#
-# Since: 1.2
-##
-{ 'enum': 'NetLegacyOptionsType',
-  'data': ['none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
-           'bridge', 'netmap', 'vhost-user'] }

Comparing this to the branches of Netdev:

Quoted 3 lines

We are losing 'none', while gaining 'hubport'.  The gain is not problematic, and I guess you are declaring that the use of 'none' has been deprecated long enough to not be a problem.

'none' still continues to work, it's also a member of NetClientDriver and was handled later in the patch:

+ if (netdev->type == NET_CLIENT_DRIVER_NONE) {
return 0; /* nothing to do */

'hubport' is blocked in the code now instead:

+ if (netdev->type == NET_CLIENT_DRIVER_HUBPORT ||
+ !net_client_init_fun[netdev->type]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
"a net backend type (maybe it is not compiled " "into this binary)");

Quoted 8 lines
Quoted 8 lines
qapi/net.json +0 -8
-
-##
-# @NetLegacyOptions:
-#
-# Like Netdev, but for use only by the legacy command line options
-#
-# Since: 1.2
-##
Quoted 8 lines
Quoted 5 lines

-{ 'union': 'NetLegacyOptions',
-  'base': { 'type': 'NetLegacyOptionsType' },
-  'discriminator': 'type',
-  'data': {
-    'nic':      'NetLegacyNicOptions',

Should we rename this to NetdevNicOptions, now that we are getting rid of other NetLegacy names?

I still consider "-net nic" as a legacy option that we should remove one day in the future, so I'd rather keep that name.

Quoted 4 lines

But I concur that all branches of the Netdev union have the same types as what you are removing here from NetLegacyOptions, so the consolidation looks sane.

Ok, thanks for your review!

Thomas

Reviewed-by Eric Blake Reviewed-by Marc-André Lureau Reviewed-by Gerd Hoffmann Reviewed-by Eric Blake on v1 1/2
#3 lore raw

Re: [PATCH 1/2] net: Drop the legacy "name" parameter from the -net option

In reply to Thomas Huth
Quoted 4 lines · Thomas Huth

It's been deprecated since QEMU v3.1, so it's time to finally remove it. The "id" parameter can simply be used instead.

[...]

Quoted 7 lines
qapi/net.json +0 -0
index 335295be50..ff280ccd16 100644
@@ -488,18 +488,16 @@
 #
 # @id: identifier for monitor commands

qapi/net.json line 497

Quoted 10 lines
qapi/net.json +1 -2
 #
-# @name: identifier for monitor commands, ignored if @id is present
-#
 # @opts: device type specific properties (legacy)
 #
 # Since: 1.2
 #
 # 'vlan': dropped in 3.0
+# 'name': dropped in 5.0
 ##

Uh, when did we start to add "dropped in" to our doc comments?

We should either do this systematically, or not at all. If the former, we have quite a few "dropped in" to add belatedly.

I vote for "not at all".

qapi/net.json line 503

Quoted 7 lines
qapi/net.json +0 -1
 { 'struct': 'NetLegacy',
   'data': {
     '*id':   'str',
-    '*name': 'str',
     'opts':  'NetLegacyOptions' } }
 
 ##

[...]

History:

$ git-log -S"dropped in" -- qapi qapi-schema.json
commit ffaee83bcb28913b8b854aeab78b1a1f2115712d
Author: Markus Armbruster <[email protected]>
Date:   Tue Jul 9 17:20:53 2019 +0200

qapi: Move query-target from misc.json to machine.json

Move query-target and its return type TargetInfo from misc.json to machine.json, where they are covered by MAINTAINERS section "Machine core". Also move its implementation from arch_init.c to hw/core/machine-qmp-cmds, where it is likewise covered.

All users of SysEmuTarget are now in machine.json. Move it there from common.json.

Message-Id: <[email protected]>

commit 416756cc049006ab8a05fe39e5f2e6af25cad9d2

Author: Thomas Huth <[email protected]>
Date:   Tue Aug 21 13:27:48 2018 +0200

Record history of ppcemb target in common.json

We recently removed the long deprecated "ppcemb" target. This adds a comment in common.json about the SysEmuTarget type, recording when it was removed.

commit 4088b5536436090207dcf6d15e47908f74b2d8f2

Author: Thomas Huth <[email protected]>
Date:   Tue May 15 18:26:20 2018 +0200

qapi/net.json: Fix the version number of the "vlan" removal

"vlan" will be dropped in 2.13, not in 2.12. And while we're at it, use the better wording "dropped in" instead of "removed with" (also for the "dump" removal).

commit 608cfed66a6adeac136b0c09cd62d081062256f3

Author: Markus Armbruster <[email protected]>
Date:   Thu Aug 24 21:14:00 2017 +0200

qapi-schema: Collect UI stuff in qapi/ui.json

UI stuff is remote desktop stuff (Spice, VNC) and input stuff (mouse, keyboard).

Message-Id: <[email protected]>

commit 912092b8e47f31c3db25e088af8460d9e752da29

Author: Gerd Hoffmann <[email protected]>
Date:   Thu Jul 27 12:47:20 2017 +0200

ui: drop altgr and altgr_r QKeyCodes

The right alt key (alt_r aka KEY_RIGHTALT) is used for AltGr. The altgr and altgr_r keys simply don't exist. Drop them.

Message-id: [email protected]

#8 lore raw

Re: [PATCH 2/2] net: Drop the NetLegacy structure, always use Netdev instead

In reply to Thomas Huth
Quoted 5 lines · Thomas Huth

Now that the "name" parameter is gone, there is hardly any difference between NetLegacy and Netdev anymore. Drop NetLegacy and always use Netdev to simplify the code quite a bit.

Took me a minute to see the actual difference.

Here's Netdev:

    { 'union': 'Netdev',
      'base': { 'id': 'str', 'type': 'NetClientDriver' },
      'discriminator': 'type',
      'data': {
        'nic':      'NetLegacyNicOptions',
        'user':     'NetdevUserOptions',
        'tap':      'NetdevTapOptions',
        'l2tpv3':   'NetdevL2TPv3Options',
        'socket':   'NetdevSocketOptions',
        'vde':      'NetdevVdeOptions',
        'bridge':   'NetdevBridgeOptions',
        'hubport':  'NetdevHubPortOptions',
        'netmap':   'NetdevNetmapOptions',
        'vhost-user': 'NetdevVhostUserOptions' } }

    { 'enum': 'NetClientDriver',
      'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
                'bridge', 'hubport', 'netmap', 'vhost-user' ] }

Here's NetLegacy:

    { 'struct': 'NetLegacy',
      'data': {
        '*id':   'str',
        'opts':  'NetLegacyOptions' } }

    { 'union': 'NetLegacyOptions',
      'base': { 'type': 'NetLegacyOptionsType' },
      'discriminator': 'type',
      'data': {
        'nic':      'NetLegacyNicOptions',
        'user':     'NetdevUserOptions',
        'tap':      'NetdevTapOptions',
        'l2tpv3':   'NetdevL2TPv3Options',
        'socket':   'NetdevSocketOptions',
        'vde':      'NetdevVdeOptions',
        'bridge':   'NetdevBridgeOptions',
        'netmap':   'NetdevNetmapOptions',
        'vhost-user': 'NetdevVhostUserOptions' } }

    { 'enum': 'NetLegacyOptionsType',
      'data': ['none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
               'bridge', 'netmap', 'vhost-user'] }

Difference: NetLegacy wraps the union in @opts.

#4 lore raw

Re: [PATCH 1/2] net: Drop the legacy "name" parameter from the -net option

In reply to Markus Armbruster
Quoted 27 lines · Markus Armbruster
Quoted 4 lines · Thomas Huth

It's been deprecated since QEMU v3.1, so it's time to finally remove it. The "id" parameter can simply be used instead.

[...]

Quoted 7 lines
qapi/net.json +0 -0
index 335295be50..ff280ccd16 100644
@@ -488,18 +488,16 @@
 #
 # @id: identifier for monitor commands

qapi/net.json line 497

Quoted 10 lines
qapi/net.json +1 -2
 #
-# @name: identifier for monitor commands, ignored if @id is present
-#
 # @opts: device type specific properties (legacy)
 #
 # Since: 1.2
 #
 # 'vlan': dropped in 3.0
+# 'name': dropped in 5.0
 ##

Uh, when did we start to add "dropped in" to our doc comments?

Quoted 2 lines

We should either do this systematically, or not at all. If the former, we have quite a few "dropped in" to add belatedly.

IIRC this has been suggested by Eric, see e.g.:

https://patchwork.kernel.org/patch/10227335/#21501161

Anyway, it should not matter much for this patch here, since the line gets removed again in the 2nd patch anyway.

Thomas

#9 lore raw
In reply to Thomas Huth
Quoted 6 lines · Thomas Huth

It's time to remove the deprecated "name" parameter from -net.

Please have a closer look at the second patch ... I think it should be fine, but I'm not 100% sure whether it's ok for all cases to drop NetLegacy, so please double-check.

Quoted 8 lines

Thomas Huth (2):
net: Drop the legacy "name" parameter from the -net option
net: Drop the NetLegacy structure, always use Netdev instead

 net/net.c            | 84 +++++++-------------------------------------
 qapi/net.json        | 53 +---------------------------
 qemu-deprecated.texi | 12 ++++---
 3 files changed, 20 insertions(+), 129 deletions(-)

Ping?

Thomas