arm: dts: imx7ulp-evk: remove mux value from pad configuration
Subsystems (2)
PATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
--- arch/arm/dts/imx7ulp-evk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/imx7ulp-evk.dts +1 -1
@@ -156,7 +156,7 @@ pinctrl_backlight: backlight_grp { fsl,pins = < - IMX7ULP_PAD_PTF2__PTF2 0x20100 + IMX7ULP_PAD_PTF2__PTF2 0x20000 >; };
Signature · 1 line
2.17.1
PATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
Quoted 6 lines
Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
Has this been accepted by Shawn?
Thanks,
Peng.
Quoted 21 lines
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>--- arch/arm/dts/imx7ulp-evk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/imx7ulp-evk.dts +1
-2@@ -156,7 +156,7 @@ pinctrl_backlight: backlight_grp { fsl,pins = < - IMX7ULP_PAD_PTF2__PTF2 0x20100 + IMX7ULP_PAD_PTF2__PTF2 0x20000 >; }; --2.17.1
Jorge Ramirez-Ortiz
PATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
Quoted 8 lines · Peng Fan
Quoted 6 lines
Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
Has this been accepted by Shawn?
added to DL now
Quoted 26 lines
Thanks,
Peng.Quoted 21 lines
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>--- arch/arm/dts/imx7ulp-evk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/imx7ulp-evk.dts +1
-2@@ -156,7 +156,7 @@ pinctrl_backlight: backlight_grp { fsl,pins = < - IMX7ULP_PAD_PTF2__PTF2 0x20100 + IMX7ULP_PAD_PTF2__PTF2 0x20000 >; }; --2.17.1
Fabio Estevam
reviewerPATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
Quoted 5 lines · Foundries
Quoted 3 lines · Peng Fan
Quoted 3 lines
Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
Has this been accepted by Shawn?
added to DL now
Mainline dts does not have backlight support, so this only affects U-Boot.
Jorge Ramirez-Ortiz
PATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
Quoted 11 lines · Fabio Estevam
Quoted 9 lines · Foundries
Quoted 7 lines · Peng Fan
Quoted 6 lines
Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Has this been accepted by Shawn?
added to DL now
Mainline dts does not have backlight support, so this only affects U-Boot.
yes, the dts is only incorrect in uboot (ie, any of the mux values that could be specified in the pad configuration field are just ignored)
Fabio Estevam
reviewerPATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
In reply to Jorge Ramirez-OrtizQuoted 7 lines · Jorge Ramirez-Ortiz
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>
PATCH 1/1 arm: dts: imx7ulp-evk: remove mux value from pad configuration
In reply to Jorge Ramirez-OrtizQuoted 6 lines
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied).
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================