Skip to contentSkip to conversation

4.19.106-stable review

PATCH In review Greg Kroah-Hartman 12 participants 218 messages Feb 21, 2020 – Feb 25, 2020 Page 1 of 2

Subsystems (8)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.19.106-stable review

This is the start of the stable review cycle for the 4.19.106 release. There are 191 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 23 Feb 2020 07:19:49 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.106-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.106-rc1

Alex Deucher <[email protected]>
drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)

Ido Schimmel <[email protected]>
mlxsw: spectrum_dpipe: Add missing error path

Michael S. Tsirkin <[email protected]>
virtio_balloon: prevent pfn array overflow

Steve French <[email protected]>
cifs: log warning message (once) if out of disk space

Vasily Averin <[email protected]>
help_next should increase position index

Wenwen Wang <[email protected]>
NFS: Fix memory leaks

Alex Deucher <[email protected]>
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage

Alex Deucher <[email protected]>
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency

Zhiqiang Liu <[email protected]>
brd: check and limit max_part par

Shubhrajyoti Datta <[email protected]>
microblaze: Prevent the overflow of the start

Andrei Otcheretianski <[email protected]>
iwlwifi: mvm: Fix thermal zone registration

Zenghui Yu <[email protected]>
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL

Coly Li <[email protected]>
bcache: explicity type cast in bset_bkey_last()

Yunfeng Ye <[email protected]>
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()

Nathan Chancellor <[email protected]>
lib/scatterlist.c: adjust indentation in __sg_alloc_table

wangyan <[email protected]>
ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()

Daniel Vetter <[email protected]>
radeon: insert 10ms sleep in dce5_crtc_load_lut

Vasily Averin <[email protected]>
trigger_next should increase position index

Vasily Averin <[email protected]>
ftrace: fpid_next() should increase position index

Ben Skeggs <[email protected]>
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided

Marc Zyngier <[email protected]>
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI

Arnd Bergmann <[email protected]>
rbd: work around -Wuninitialized warning

Xiubo Li <[email protected]>
ceph: check availability of mds cluster on mount after wait timeout

Vasily Averin <[email protected]>
bpf: map_seq_next should always increase position index

Ronnie Sahlberg <[email protected]>
cifs: fix NULL dereference in match_prepath

Colin Ian King <[email protected]>
iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop

Nathan Chancellor <[email protected]>
hostap: Adjust indentation in prism2_hostapd_add_sta

Vincenzo Frascino <[email protected]>
ARM: 8951/1: Fix Kexec compilation issue.

zhangyi (F) <[email protected]>
jbd2: make sure ESHUTDOWN to be recorded in the journal superblock

zhangyi (F) <[email protected]>
jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record

Lorenz Bauer <[email protected]>
selftests: bpf: Reset global state between reuseport test runs

Lu Baolu <[email protected]>
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()

Liang Chen <[email protected]>
bcache: cached_dev_free needs to put the sb page

Oliver O'Halloran <[email protected]>
powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV

Ben Skeggs <[email protected]>
drm/nouveau/mmu: fix comptag memory leak

Peter Große <[email protected]>
ALSA: hda - Add docking station support for Lenovo Thinkpad T420s

Colin Ian King <[email protected]>
driver core: platform: fix u32 greater or equal to zero comparison

Vasily Gorbik <[email protected]>
s390/ftrace: generate traced function stack frame

Vasily Gorbik <[email protected]>
s390: adjust -mpacked-stack support check for clang 10

Masami Hiramatsu <[email protected]>
x86/decoder: Add TEST opcode to Group3-2

Masahiro Yamada <[email protected]>
kbuild: use -S instead of -E for precise cc-option test in Kconfig

Kai Vehmanen <[email protected]>
ALSA: hda/hdmi - add retry logic to parse_intel_hdmi()

John Garry <[email protected]>
irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problems

Brandon Maier <[email protected]>
remoteproc: Initialize rproc_class before use

Jessica Yu <[email protected]>

    module: avoid setting info->name early in case we can fall back to info->mod->name

Anand Jain <[email protected]>
btrfs: device stats, log when stats are zeroed

David Sterba <[email protected]>
btrfs: safely advance counter when looking up bio csums

Johannes Thumshirn <[email protected]>
btrfs: fix possible NULL-pointer dereference in integrity checks

yu kuai <[email protected]>
pwm: Remove set but not set variable 'pwm'

Dan Carpenter <[email protected]>
ide: serverworks: potential overflow in svwks_set_pio_mode()

Dan Carpenter <[email protected]>
cmd64x: potential buffer overflow in cmd64x_program_timings()

Uwe Kleine-König <[email protected]>
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional

Ard Biesheuvel <[email protected]>
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd

Chao Yu <[email protected]>
f2fs: fix memleak of kobject

Hanjun Guo <[email protected]>
ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()

Thomas Gleixner <[email protected]>
watchdog/softlockup: Enforce that timestamp is valid on boot

Jun Lei <[email protected]>
drm/amd/display: fixup DML dependencies

Sami Tolvanen <[email protected]>
arm64: fix alternatives with LLVM's integrated assembler

Nick Black <[email protected]>
scsi: iscsi: Don't destroy session if there are outstanding connections

Jaegeuk Kim <[email protected]>
f2fs: free sysfs kobject

Jaegeuk Kim <[email protected]>
f2fs: set I_LINKABLE early to avoid wrong access by vfs

Will Deacon <[email protected]>
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE

Tony Lindgren <[email protected]>
usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue

Navid Emamdoost <[email protected]>
drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add

Ben Skeggs <[email protected]>
drm/nouveau/fault/gv100-: fix memory leak on module unload

YueHaibing <[email protected]>
drm/nouveau/drm/ttm: Remove set but not used variable 'mem'

YueHaibing <[email protected]>
drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler

Ben Skeggs <[email protected]>
drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw

Dan Carpenter <[email protected]>
drm/nouveau/secboot/gm20b: initialize pointer in gm20b_secboot_new()

Arnd Bergmann <[email protected]>
vme: bridges: reduce stack usage

Li RongQing <[email protected]>
bpf: Return -EBADRQC for invalid map type in __bpf_tx_xdp_map

Geert Uytterhoeven <[email protected]>
driver core: Print device when resources present in really_probe()

Simon Schwartz <[email protected]>
driver core: platform: Prevent resouce overflow from causing infinite loops

Arnd Bergmann <[email protected]>
visorbus: fix uninitialized variable access

Nathan Chancellor <[email protected]>
tty: synclink_gt: Adjust indentation in several functions

Nathan Chancellor <[email protected]>
tty: synclinkmp: Adjust indentation in several functions

Jason Gunthorpe <[email protected]>
RDMA/uverbs: Remove needs_kfree_rcu from uverbs_obj_type_class

Chen Zhou <[email protected]>
ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m

Arnd Bergmann <[email protected]>
wan: ixp4xx_hss: fix compile-testing on 64-bit

Changbin Du <[email protected]>
x86/nmi: Remove irq_work from the long duration NMI handler

Philipp Zabel <[email protected]>
Input: edt-ft5x06 - work around first register access error

Paul E. McKenney <[email protected]>

    rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls

Ard Biesheuvel <[email protected]>
efi/x86: Don't panic or BUG() on non-critical error conditions

Dmitry Osipenko <[email protected]>
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees

Mike Marciniszyn <[email protected]>
IB/hfi1: Add software counter for ctxt0 seq drop

Arnd Bergmann <[email protected]>
staging: rtl8188: avoid excessive stack usage

Jan Kara <[email protected]>
udf: Fix free space reporting for metadata and virtual partitions

Shuah Khan <[email protected]>
usbip: Fix unsafe unaligned pointer usage

Benjamin Gaignard <[email protected]>
ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco

Dingchen Zhang <[email protected]>
drm: remove the newline for CRC source name.

Arnd Bergmann <[email protected]>
mlx5: work around high stack usage with gcc

Jason Ekstrand <[email protected]>
ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch

Shile Zhang <[email protected]>
x86/unwind/orc: Fix !CONFIG_MODULES build warning

Andrey Zhizhikin <[email protected]>
tools lib api fs: Fix gcc9 stringop-truncation compilation error

Takashi Iwai <[email protected]>
ALSA: sh: Fix compile warning wrt const

Kunihiko Hayashi <[email protected]>
clk: uniphier: Add SCSSI clock gate for each channel

Takashi Iwai <[email protected]>
ALSA: sh: Fix unused variable warnings

Icenowy Zheng <[email protected]>
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock

Jiewei Ke <[email protected]>
RDMA/rxe: Fix error type of mmap_offset

Kunihiko Hayashi <[email protected]>
reset: uniphier: Add SCSSI reset control for each channel

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

Chanwoo Choi <[email protected]>
PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency

Valdis Kletnieks <[email protected]>
x86/vdso: Provide missing include file

Vinay Kumar Yadav <[email protected]>
crypto: chtls - Fixed memory leak

Sascha Hauer <[email protected]>
dmaengine: imx-sdma: Fix memory leak

Logan Gunthorpe <[email protected]>
dmaengine: Store module owner in dma_device struct

Jaihind Yadav <[email protected]>
selinux: ensure we cleanup the internal AVC counters on error in avc_update()

Geert Uytterhoeven <[email protected]>
ARM: dts: r8a7779: Add device node for ARM global timer

Bibby Hsieh <[email protected]>
drm/mediatek: handle events when enabling/disabling crtc

Nathan Chancellor <[email protected]>
scsi: aic7xxx: Adjust indentation in ahc_find_syncrate

Can Guo <[email protected]>
scsi: ufs: Complete pending requests in host reset and restore path

Erik Kaneda <[email protected]>
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1

Aditya Pakki <[email protected]>
orinoco: avoid assertion in case of NULL pointer

Phong Tran <[email protected]>
rtlwifi: rtl_pci: Fix -Wcast-function-type

Phong Tran <[email protected]>
iwlegacy: Fix -Wcast-function-type

Phong Tran <[email protected]>
ipw2x00: Fix -Wcast-function-type

Phong Tran <[email protected]>
b43legacy: Fix -Wcast-function-type

Nathan Chancellor <[email protected]>
ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status

Xin Long <[email protected]>
netfilter: nft_tunnel: add the missing ERSPAN_VERSION nla_policy

Arnd Bergmann <[email protected]>
isdn: don't mark kcapi_proc_exit as __exit

Aditya Pakki <[email protected]>
fore200e: Fix incorrect checks of NULL pointer dereference

Heiner Kallweit <[email protected]>
r8169: check that Realtek PHY driver module is loaded

Jan Kara <[email protected]>
reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling

Nathan Chancellor <[email protected]>
media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros

Daniel Drake <[email protected]>
PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers

Daniel Drake <[email protected]>
PCI: Add generic quirk for increasing D3hot delay

Forest Crossman <[email protected]>
media: cx23885: Add support for AVerMedia CE310B

Wei Liu <[email protected]>
PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in

Andrey Smirnov <[email protected]>
ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed

Andrey Smirnov <[email protected]>
ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3

Daniel Jordan <[email protected]>

    padata: always acquire cpu_hotplug_lock before pinst->lock

Manu Gautam <[email protected]>
arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

Paul Moore <[email protected]>
selinux: ensure we cleanup the internal AVC counters on error in avc_insert()

Andre Przywara <[email protected]>
arm: dts: allwinner: H3: Add PMU node

Andre Przywara <[email protected]>
arm64: dts: allwinner: H6: Add PMU mode

Stephen Smalley <[email protected]>
selinux: fall back to ref-walk if audit is required

Mao Wenan <[email protected]>

    NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().

Rasmus Villemoes <[email protected]>
net/wan/fsl_ucc_hdlc: reject muram offsets above 64K

Miquel Raynal <[email protected]>
regulator: rk808: Lower log level on optional GPIOs being not available

Nathan Chancellor <[email protected]>
drm/amdgpu: Ensure ret is always initialized when using SOC15_WAIT_ON_RREG

yu kuai <[email protected]>
drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table

Douglas Anderson <[email protected]>
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

Masahiro Yamada <[email protected]>
kconfig: fix broken dependency in randconfig-generated .config

Christian Borntraeger <[email protected]>

    KVM: s390: ENOTSUPP -> EOPNOTSUPP fixups

Sun Ke <[email protected]>
nbd: add a flush_workqueue in nbd_start_device

Harry Wentland <[email protected]>
drm/amd/display: Retrain dongles when SINK_COUNT becomes non-zero

Rakesh Pillai <[email protected]>
ath10k: Correct the DMA direction for management tx buffers

zhangyi (F) <[email protected]>
ext4, jbd2: ensure panic when aborting with zero errno

Vincenzo Frascino <[email protected]>
ARM: 8952/1: Disable kmemleak on XIP kernels

Steven Rostedt (VMware) <[email protected]>
tracing: Fix very unlikely race of registering two stat tracers

Luis Henriques <[email protected]>
tracing: Fix tracing_stat return values in error handling paths

Oliver O'Halloran <[email protected]>
powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov()

Niklas Schnelle <[email protected]>
s390/pci: Fix possible deadlock in recover_store()

Uwe Kleine-König <[email protected]>
pwm: omap-dmtimer: Simplify error handling

Arvind Sankar <[email protected]>
x86/sysfb: Fix check for bad VRAM size

Kai Li <[email protected]>
jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal

Siddhesh Poyarekar <[email protected]>
kselftest: Minimise dependency of get_size on C library interfaces

Colin Ian King <[email protected]>
clocksource/drivers/bcm2835_timer: Fix memory leak of timer

John Keeping <[email protected]>
usb: dwc2: Fix IN FIFO allocation

Jia-Ju Bai <[email protected]>
usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()

Jia-Ju Bai <[email protected]>
uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()

David S. Miller <[email protected]>
sparc: Add .exit.data section.

Tiezhu Yang <[email protected]>
MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()

Ard Biesheuvel <[email protected]>
efi/x86: Map the entire EFI vendor string before copying it

Hans de Goede <[email protected]>
pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins

Jia-Ju Bai <[email protected]>
media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()

Sergey Senozhatsky <[email protected]>
char/random: silence a lockdep splat with printk()

Jacob Pan <[email protected]>
iommu/vt-d: Fix off-by-one in PASID allocation

Jia-Ju Bai <[email protected]>
gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()

Oliver O'Halloran <[email protected]>
powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number

Eugen Hristev <[email protected]>
media: i2c: mt9v032: fix enum mbus codes and frame sizes

Christophe JAILLET <[email protected]>
pxa168fb: Fix the function used to release some memory in an error handling path

Geert Uytterhoeven <[email protected]>
pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs

Vladimir Oltean <[email protected]>
gianfar: Fix TX timestamping with a stacked DSA driver

Takashi Sakamoto <[email protected]>
ALSA: ctl: allow TLV read operation for callback type of element in locked case

Ritesh Harjani <[email protected]>
ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT

Zahari Petkov <[email protected]>
leds: pca963x: Fix open-drain initialization

Dan Carpenter <[email protected]>
brcmfmac: Fix use after free in brcmf_sdio_readframes()

Peter Zijlstra <[email protected]>
cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order

Rasmus Villemoes <[email protected]>
soc: fsl: qe: change return type of cpm_muram_alloc() to s32

J. Bruce Fields <[email protected]>
nfsd4: avoid NULL deference on strange COPY compounds

Paul Kocialkowski <[email protected]>
drm/gma500: Fixup fbdev stolen size usage evaluation

Sean Christopherson <[email protected]>
KVM: nVMX: Use correct root level for nested EPT shadow page tables

Sasha Levin <[email protected]>
Revert "KVM: VMX: Add non-canonical check on writes to RTIT address MSRs"

Sasha Levin <[email protected]>
Revert "KVM: nVMX: Use correct root level for nested EPT shadow page tables"

Davide Caratti <[email protected]>
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS

Davide Caratti <[email protected]>
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS

Per Forlin <[email protected]>
net: dsa: tag_qca: Make sure there is headroom for tag

Eric Dumazet <[email protected]>
net/smc: fix leak of kernel memory to user space

Firo Yang <[email protected]>
enic: prevent waking up stopped tx queues over watchdog reset

Toke Høiland-Jørgensen <[email protected]>
core: Don't skip generic XDP program execution for cloned SKBs

-------------

Diffstat:

 Makefile                                           |    4 +-
 arch/arm/Kconfig                                   |    4 +-
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi            |    7 +-
 arch/arm/boot/dts/r8a7779.dtsi                     |    8 +
 arch/arm/boot/dts/stm32f469-disco.dts              |    8 +
 arch/arm/boot/dts/sun8i-h3.dtsi                    |   15 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi       |   10 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |    4 +
 arch/arm64/include/asm/alternative.h               |   32 +-
 arch/microblaze/kernel/cpu/cache.c                 |    3 +-
 arch/mips/loongson64/loongson-3/platform.c         |    3 +
 arch/powerpc/kernel/eeh_driver.c                   |    6 -
 arch/powerpc/kernel/pci_dn.c                       |   15 +-
 arch/powerpc/platforms/powernv/pci-ioda.c          |   48 +-
 arch/powerpc/platforms/powernv/pci.c               |   18 -
 arch/s390/Makefile                                 |    2 +-
 arch/s390/kernel/mcount.S                          |   15 +-
 arch/s390/kvm/interrupt.c                          |    6 +-
 arch/s390/pci/pci_sysfs.c                          |   63 +-
 arch/sh/include/cpu-sh2a/cpu/sh7269.h              |   11 +-
 arch/sparc/kernel/vmlinux.lds.S                    |    6 +-
 arch/x86/entry/vdso/vdso32-setup.c                 |    1 +
 arch/x86/include/asm/nmi.h                         |    1 -
 arch/x86/kernel/nmi.c                              |   20 +-
 arch/x86/kernel/sysfb_simplefb.c                   |    2 +-
 arch/x86/kernel/unwind_orc.c                       |    3 +-
 arch/x86/kvm/vmx.c                                 |    3 +
 arch/x86/kvm/vmx/vmx.c                             | 8036 --------------------
 arch/x86/lib/x86-opcode-map.txt                    |    2 +-
 arch/x86/mm/pageattr.c                             |    8 +-
 arch/x86/platform/efi/efi.c                        |   41 +-
 arch/x86/platform/efi/efi_64.c                     |    9 +-
 drivers/acpi/acpica/dsfield.c                      |    2 +-
 drivers/acpi/acpica/dswload.c                      |   21 +
 drivers/acpi/arm64/iort.c                          |   57 +-
 drivers/acpi/button.c                              |   11 +
 drivers/atm/fore200e.c                             |   25 +-
 drivers/base/dd.c                                  |    5 +-
 drivers/base/platform.c                            |   12 +-
 drivers/block/brd.c                                |   22 +-
 drivers/block/nbd.c                                |   10 +
 drivers/block/rbd.c                                |    2 +-
 drivers/char/random.c                              |    5 +-
 drivers/clk/qcom/clk-rcg2.c                        |    3 +
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c              |   28 +-
 drivers/clk/uniphier/clk-uniphier-peri.c           |   13 +-
 drivers/clocksource/bcm2835_timer.c                |    5 +-
 drivers/crypto/chelsio/chtls/chtls_cm.c            |   27 +-
 drivers/crypto/chelsio/chtls/chtls_cm.h            |   21 +
 drivers/crypto/chelsio/chtls/chtls_hw.c            |    3 +
 drivers/devfreq/Kconfig                            |    3 +-
 drivers/devfreq/event/Kconfig                      |    2 +-
 drivers/dma/dmaengine.c                            |    4 +-
 drivers/dma/imx-sdma.c                             |   19 +-
 drivers/gpio/gpio-grgpio.c                         |   10 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c       |   19 +-
 drivers/gpu/drm/amd/amdgpu/soc15_common.h          |    1 +
 drivers/gpu/drm/amd/display/dc/calcs/dcn_calcs.c   |   34 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link.c      |    3 +-
 .../gpu/drm/amd/display/dc/dml/dml_common_defs.c   |    2 +-
 .../gpu/drm/amd/display/dc/dml/dml_inline_defs.h   |    2 +-
 .../amd/display/dc/{calcs => inc}/dcn_calc_math.h  |    0
 drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c  |   23 +-
 drivers/gpu/drm/drm_debugfs_crc.c                  |    4 +-
 drivers/gpu/drm/gma500/framebuffer.c               |    8 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            |    8 +
 drivers/gpu/drm/nouveau/nouveau_fence.c            |    2 +-
 drivers/gpu/drm/nouveau/nouveau_ttm.c              |    4 -
 drivers/gpu/drm/nouveau/nvkm/core/memory.c         |    2 +-
 .../gpu/drm/nouveau/nvkm/engine/disp/channv50.c    |    2 +
 drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c     |   21 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/fault/base.c   |    1 +
 .../gpu/drm/nouveau/nvkm/subdev/secboot/gm20b.c    |    5 +-
 drivers/gpu/drm/radeon/radeon_display.c            |    2 +
 drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c         |    4 +-
 drivers/ide/cmd64x.c                               |    3 +
 drivers/ide/serverworks.c                          |    6 +
 drivers/infiniband/core/rdma_core.c                |   23 +-
 drivers/infiniband/hw/hfi1/chip.c                  |   10 +
 drivers/infiniband/hw/hfi1/chip.h                  |    1 +
 drivers/infiniband/hw/hfi1/driver.c                |    1 +
 drivers/infiniband/hw/hfi1/hfi.h                   |    2 +
 drivers/infiniband/sw/rxe/rxe_verbs.h              |    2 +-
 drivers/input/touchscreen/edt-ft5x06.c             |    7 +
 drivers/iommu/arm-smmu-v3.c                        |    3 +-
 drivers/iommu/dmar.c                               |    1 -
 drivers/iommu/intel-svm.c                          |    2 +-
 drivers/irqchip/irq-gic-v3-its.c                   |    2 +-
 drivers/irqchip/irq-gic-v3.c                       |    9 +-
 drivers/irqchip/irq-mbigen.c                       |    1 +
 drivers/isdn/capi/kcapi_proc.c                     |    2 +-
 drivers/leds/leds-pca963x.c                        |    8 +-
 drivers/md/bcache/bset.h                           |    3 +-
 drivers/md/bcache/super.c                          |    3 +
 drivers/media/i2c/mt9v032.c                        |   10 +-
 drivers/media/pci/cx23885/cx23885-cards.c          |   24 +
 drivers/media/pci/cx23885/cx23885-video.c          |    3 +-
 drivers/media/pci/cx23885/cx23885.h                |    1 +
 drivers/media/platform/sti/bdisp/bdisp-hw.c        |    6 +-
 drivers/net/ethernet/cisco/enic/enic_main.c        |    2 +-
 drivers/net/ethernet/freescale/gianfar.c           |   10 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c |    3 +
 .../net/ethernet/mellanox/mlxsw/spectrum_dpipe.c   |    3 +-
 drivers/net/ethernet/realtek/r8169.c               |    9 +
 drivers/net/wan/fsl_ucc_hdlc.c                     |    5 +
 drivers/net/wan/ixp4xx_hss.c                       |    4 +-
 drivers/net/wireless/ath/ath10k/wmi.c              |    2 +-
 drivers/net/wireless/broadcom/b43legacy/main.c     |    5 +-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |    1 +
 drivers/net/wireless/intel/ipw2x00/ipw2100.c       |    7 +-
 drivers/net/wireless/intel/ipw2x00/ipw2200.c       |    5 +-
 drivers/net/wireless/intel/iwlegacy/3945-mac.c     |    5 +-
 drivers/net/wireless/intel/iwlegacy/4965-mac.c     |    5 +-
 drivers/net/wireless/intel/iwlegacy/common.c       |    2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/tt.c        |    4 +-
 drivers/net/wireless/intersil/hostap/hostap_ap.c   |    2 +-
 .../net/wireless/intersil/orinoco/orinoco_usb.c    |    3 +-
 drivers/net/wireless/realtek/rtlwifi/pci.c         |   10 +-
 drivers/nfc/port100.c                              |    2 +-
 drivers/pci/controller/pcie-iproc.c                |   24 +
 drivers/pci/quirks.c                               |   61 +-
 drivers/pinctrl/intel/pinctrl-baytrail.c           |    8 +-
 drivers/pinctrl/sh-pfc/pfc-sh7264.c                |    9 +-
 drivers/pinctrl/sh-pfc/pfc-sh7269.c                |   39 +-
 drivers/pwm/pwm-omap-dmtimer.c                     |   35 +-
 drivers/pwm/pwm-pca9685.c                          |    4 -
 drivers/regulator/rk808-regulator.c                |    2 +-
 drivers/remoteproc/remoteproc_core.c               |    2 +-
 drivers/reset/reset-uniphier.c                     |   13 +-
 drivers/scsi/aic7xxx/aic7xxx_core.c                |    2 +-
 drivers/scsi/iscsi_tcp.c                           |    4 +
 drivers/scsi/scsi_transport_iscsi.c                |   26 +-
 drivers/scsi/ufs/ufshcd.c                          |   24 +-
 drivers/scsi/ufs/ufshcd.h                          |    2 +
 drivers/soc/fsl/qe/qe_common.c                     |   29 +-
 drivers/soc/tegra/fuse/tegra-apbmisc.c             |    2 +-
 drivers/staging/rtl8188eu/os_dep/ioctl_linux.c     |    9 +-
 drivers/tty/synclink_gt.c                          |   18 +-
 drivers/tty/synclinkmp.c                           |   24 +-
 drivers/uio/uio_dmem_genirq.c                      |    6 +-
 drivers/usb/dwc2/gadget.c                          |    3 +-
 drivers/usb/gadget/udc/gr_udc.c                    |   16 +-
 drivers/usb/musb/omap2430.c                        |    2 -
 drivers/video/fbdev/pxa168fb.c                     |    6 +-
 drivers/virtio/virtio_balloon.c                    |    2 +
 drivers/visorbus/visorchipset.c                    |   11 +-
 drivers/vme/bridges/vme_fake.c                     |   30 +-
 fs/btrfs/check-integrity.c                         |    3 +-
 fs/btrfs/file-item.c                               |    3 +-
 fs/btrfs/volumes.c                                 |    2 +
 fs/ceph/mds_client.c                               |    3 +-
 fs/ceph/super.c                                    |    5 +
 fs/cifs/connect.c                                  |    6 +-
 fs/cifs/smb2pdu.c                                  |    3 +
 fs/ext4/file.c                                     |   10 +-
 fs/f2fs/namei.c                                    |   27 +-
 fs/f2fs/sysfs.c                                    |   12 +-
 fs/jbd2/checkpoint.c                               |    2 +-
 fs/jbd2/commit.c                                   |    4 +-
 fs/jbd2/journal.c                                  |   24 +-
 fs/nfs/nfs42proc.c                                 |    4 +-
 fs/nfsd/nfs4proc.c                                 |    3 +-
 fs/ocfs2/journal.h                                 |    8 +-
 fs/orangefs/orangefs-debugfs.c                     |    1 +
 fs/reiserfs/stree.c                                |    3 +-
 fs/reiserfs/super.c                                |    2 +-
 fs/udf/super.c                                     |   22 +-
 include/linux/dmaengine.h                          |    2 +
 include/linux/list_nulls.h                         |    8 +-
 include/linux/rculist_nulls.h                      |    8 +-
 include/media/v4l2-device.h                        |   12 +-
 include/rdma/uverbs_types.h                        |    1 -
 include/soc/fsl/qe/qe.h                            |   16 +-
 kernel/bpf/inode.c                                 |    3 +-
 kernel/cpu.c                                       |   13 +-
 kernel/module.c                                    |    9 +-
 kernel/padata.c                                    |    4 +-
 kernel/trace/ftrace.c                              |    5 +-
 kernel/trace/trace_events_trigger.c                |    5 +-
 kernel/trace/trace_stat.c                          |   31 +-
 kernel/watchdog.c                                  |   10 +-
 lib/scatterlist.c                                  |    2 +-
 net/core/dev.c                                     |    4 +-
 net/core/filter.c                                  |    2 +-
 net/dsa/tag_qca.c                                  |    2 +-
 net/netfilter/nft_tunnel.c                         |    3 +-
 net/sched/cls_flower.c                             |    1 +
 net/sched/cls_matchall.c                           |    1 +
 net/smc/smc_diag.c                                 |    5 +-
 scripts/Kconfig.include                            |    2 +-
 scripts/kconfig/confdata.c                         |    2 +-
 security/selinux/avc.c                             |   77 +-
 security/selinux/hooks.c                           |   11 +-
 security/selinux/include/avc.h                     |    8 +-
 sound/core/control.c                               |    5 +-
 sound/pci/hda/patch_conexant.c                     |    1 +
 sound/pci/hda/patch_hdmi.c                         |    7 +-
 sound/sh/aica.c                                    |    4 +-
 sound/sh/sh_dac_audio.c                            |    3 -
 sound/soc/atmel/Kconfig                            |    2 +
 sound/usb/usx2y/usX2Yhwdep.c                       |    2 +-
 tools/lib/api/fs/fs.c                              |    4 +-
 tools/objtool/arch/x86/lib/x86-opcode-map.txt      |    2 +-
 .../testing/selftests/bpf/test_select_reuseport.c  |   16 +-
 tools/testing/selftests/size/get_size.c            |   24 +-
 tools/usb/usbip/src/usbip_network.c                |   40 +-
 tools/usb/usbip/src/usbip_network.h                |   12 +-
 207 files changed, 1280 insertions(+), 8742 deletions(-)
author maintainer
#1 lore raw

PATCH 1/191 core: Dont skip generic XDP program execution for cloned SKBs

From: "Toke H�iland-J�rgensen" <[email protected]>

[ Upstream commit ad1e03b2b3d4430baaa109b77bc308dc73050de3 ]

The current generic XDP handler skips execution of XDP programs entirely if an SKB is marked as cloned. This leads to some surprising behaviour, as packets can end up being cloned in various ways, which will make an XDP program not see all the traffic on an interface.

This was discovered by a simple test case where an XDP program that always returns XDP_DROP is installed on a veth device. When combining this with the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending side, SKBs reliably end up in the cloned state, causing them to be passed through to the receiving interface instead of being dropped. A minimal reproducer script for this is included below.

This patch fixed the issue by simply triggering the existing linearisation code for cloned SKBs instead of skipping the XDP program execution. This behaviour is in line with the behaviour of the native XDP implementation for the veth driver, which will reallocate and copy the SKB data if the SKB is marked as shared.

Reproducer Python script (requires BCC and Scapy):

from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP from bcc import BPF
import time, sys, subprocess, shlex

SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable

def client():

    time.sleep(2)
    # Sniffing on the sender causes skb_cloned() to be set
    s = AsyncSniffer()
    s.start()

    for p in range(10):
        sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
              verbose=False)
        time.sleep(0.1)

    s.stop()
    return 0

def server(mode):
prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}") func = prog.load_func("dummy_drop", BPF.XDP) prog.attach_xdp("a_to_b", func, mode)

time.sleep(1)

s = sniff(iface="a_to_b", count=10, timeout=15) if len(s):
print(f"Got {len(s)} packets - should have gotten 0") return 1
else:
print("Got no packets - as expected") return 0

if len(sys.argv) < 2:

    print(f"Usage: {sys.argv[0]} <skb|drv>")
    sys.exit(1)

if sys.argv[1] == "client":

    sys.exit(client())
elif sys.argv[1] == "server":
    mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
    sys.exit(server(mode))

else:
try:
mode = sys.argv[1]
if mode not in ('skb', 'drv'):
print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1)
print(f"Running in {mode} mode")

for cmd in [
'ip netns add netns_a',
'ip netns add netns_b',
'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b', # Disable ipv6 to make sure there's no address autoconf traffic 'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1', 'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1', 'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa', 'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc', 'ip -n netns_a link set dev a_to_b up',
'ip -n netns_b link set dev b_to_a up']:
subprocess.check_call(shlex.split(cmd))

server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}")) client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))

client.wait()
server.wait()
sys.exit(server.returncode)

finally:
subprocess.run(shlex.split("ip netns delete netns_a")) subprocess.run(shlex.split("ip netns delete netns_b"))

Fixes d445516966dc ("net: xdp: support xdp generic on virtual devices")
---
 net/core/dev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/core/dev.c +2 -2
@@ -4306,14 +4306,14 @@ static u32 netif_receive_generic_xdp(str
 	/* Reinjected packets coming from act_mirred or similar should
 	 * not get XDP generic processing.
 	 */
-	if (skb_cloned(skb) || skb_is_tc_redirected(skb))
+	if (skb_is_tc_redirected(skb))
 		return XDP_PASS;
 
 	/* XDP packets must be linear and must have sufficient headroom
 	 * of XDP_PACKET_HEADROOM bytes. This is the guarantee that also
 	 * native XDP provides, thus we need to do it here as well.
 	 */
-	if (skb_is_nonlinear(skb) ||
+	if (skb_cloned(skb) || skb_is_nonlinear(skb) ||
 	    skb_headroom(skb) < XDP_PACKET_HEADROOM) {
 		int hroom = XDP_PACKET_HEADROOM - skb_headroom(skb);
 		int troom = skb->tail + skb->data_len - skb->end;
author maintainer
#2 lore raw

PATCH 2/191 enic: prevent waking up stopped tx queues over watchdog reset

In reply to Greg Kroah-Hartman

From: Firo Yang <[email protected]>

[ Upstream commit 0f90522591fd09dd201065c53ebefdfe3c6b55cb ]

Recent months, our customer reported several kernel crashes all preceding with following message:
NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out Error message of one of those crashes:

BUG: unable to handle kernel paging request at ffffffffa007e090

After analyzing severl vmcores, I found that most of crashes are caused by memory corruption. And all the corrupted memory areas are overwritten by data of network packets. Moreover, I also found that the tx queues were enabled over watchdog reset.

After going through the source code, I found that in enic_stop(), the tx queues stopped by netif_tx_disable() could be woken up over a small time window between netif_tx_disable() and the napi_disable() by the following code path:
napi_poll->
enic_poll_msix_wq->

     vnic_cq_service->
        enic_wq_service->
           netif_wake_subqueue(enic->netdev, q_number)->
              test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)

In turn, upper netowrk stack could queue skb to ENIC NIC though enic_hard_start_xmit(). And this might introduce some race condition.

Our customer comfirmed that this kind of kernel crash doesn't occur over 90 days since they applied this patch.

---
 drivers/net/ethernet/cisco/enic/enic_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/cisco/enic/enic_main.c +1 -1
@@ -2013,10 +2013,10 @@ static int enic_stop(struct net_device *
 		napi_disable(&enic->napi[i]);
 
 	netif_carrier_off(netdev);
-	netif_tx_disable(netdev);
 	if (vnic_dev_get_intr_mode(enic->vdev) == VNIC_DEV_INTR_MODE_MSIX)
 		for (i = 0; i < enic->wq_count; i++)
 			napi_disable(&enic->napi[enic_cq_wq(enic, i)]);
+	netif_tx_disable(netdev);
 
 	if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic))
 		enic_dev_del_station_addr(enic);
author maintainer
#3 lore raw

PATCH 3/191 net/smc: fix leak of kernel memory to user space

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 457fed775c97ac2c0cd1672aaf2ff2c8a6235e87 ]

As nlmsg_put() does not clear the memory that is reserved, it this the caller responsability to make sure all of this memory will be written, in order to not reveal prior content.

While we are at it, we can provide the socket cookie even if clsock is not set.

syzbot reported :

BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline]
BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
 __fswab32 include/uapi/linux/swab.h:59 [inline]
 __swab32p include/uapi/linux/swab.h:179 [inline]
 __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
 get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
 ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
 ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
 bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252

Uninit was created at:

 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128
 kmalloc_large_node_hook mm/slub.c:1406 [inline]
 kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841
 __kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224
 __netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352
 netlink_dump_start include/linux/netlink.h:233 [inline]
 smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242
 sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256
 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 kernel_sendmsg+0x433/0x440 net/socket.c:679
 sock_no_sendpage+0x235/0x300 net/core/sock.c:2740
 kernel_sendpage net/socket.c:3776 [inline]
 sock_sendpage+0x1e1/0x2c0 net/socket.c:937
 pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458
 splice_from_pipe_feed fs/splice.c:512 [inline]
 __splice_from_pipe+0x539/0xed0 fs/splice.c:636
 splice_from_pipe fs/splice.c:671 [inline]
 generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844
 do_splice_from fs/splice.c:863 [inline]
 do_splice fs/splice.c:1170 [inline]
 __do_sys_splice fs/splice.c:1447 [inline]
 __se_sys_splice+0x2380/0x3350 fs/splice.c:1427
 __x64_sys_splice+0x6e/0x90 fs/splice.c:1427
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Cc Ursula Braun <[email protected]>
---
 net/smc/smc_diag.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
net/smc/smc_diag.c +2 -3
@@ -38,16 +38,15 @@ static void smc_diag_msg_common_fill(str
 {
 	struct smc_sock *smc = smc_sk(sk);
 
+	memset(r, 0, sizeof(*r));
 	r->diag_family = sk->sk_family;
+	sock_diag_save_cookie(sk, r->id.idiag_cookie);
 	if (!smc->clcsock)
 		return;
 	r->id.idiag_sport = htons(smc->clcsock->sk->sk_num);
 	r->id.idiag_dport = smc->clcsock->sk->sk_dport;
 	r->id.idiag_if = smc->clcsock->sk->sk_bound_dev_if;
-	sock_diag_save_cookie(sk, r->id.idiag_cookie);
 	if (sk->sk_protocol == SMCPROTO_SMC) {
-		memset(&r->id.idiag_src, 0, sizeof(r->id.idiag_src));
-		memset(&r->id.idiag_dst, 0, sizeof(r->id.idiag_dst));
 		r->id.idiag_src[0] = smc->clcsock->sk->sk_rcv_saddr;
 		r->id.idiag_dst[0] = smc->clcsock->sk->sk_daddr;
 #if IS_ENABLED(CONFIG_IPV6)
author maintainer
#4 lore raw

PATCH 4/191 net: dsa: tag_qca: Make sure there is headroom for tag

In reply to Greg Kroah-Hartman

From: Per Forlin <[email protected]>

[ Upstream commit 04fb91243a853dbde216d829c79d9632e52aa8d9 ]

Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data.
This change does not introduce any overhead in case there is already available headroom for tag.

---
 net/dsa/tag_qca.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/dsa/tag_qca.c +1 -1
@@ -41,7 +41,7 @@ static struct sk_buff *qca_tag_xmit(stru
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	u16 *phdr, hdr;
 
-	if (skb_cow_head(skb, 0) < 0)
+	if (skb_cow_head(skb, QCA_HDR_LEN) < 0)
 		return NULL;
 
 	skb_push(skb, QCA_HDR_LEN);
author maintainer
#5 lore raw

PATCH 5/191 net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS

In reply to Greg Kroah-Hartman

From: Davide Caratti <[email protected]>

[ Upstream commit 1afa3cc90f8fb745c777884d79eaa1001d6927a6 ]

unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy.

Fixes b87f7936a932 ("net/sched: Add match-all classifier hw offloading.")
---
 net/sched/cls_matchall.c |    1 +
 1 file changed, 1 insertion(+)
net/sched/cls_matchall.c +1 -0
@@ -137,6 +137,7 @@ static void *mall_get(struct tcf_proto *
 static const struct nla_policy mall_policy[TCA_MATCHALL_MAX + 1] = {
 	[TCA_MATCHALL_UNSPEC]		= { .type = NLA_UNSPEC },
 	[TCA_MATCHALL_CLASSID]		= { .type = NLA_U32 },
+	[TCA_MATCHALL_FLAGS]		= { .type = NLA_U32 },
 };
 
 static int mall_set_parms(struct net *net, struct tcf_proto *tp,
author maintainer
#6 lore raw

PATCH 6/191 net/sched: flower: add missing validation of TCA_FLOWER_FLAGS

In reply to Greg Kroah-Hartman

From: Davide Caratti <[email protected]>

[ Upstream commit e2debf0852c4d66ba1a8bde12869b196094c70a7 ]

unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy.

Fixes 5b33f48842fa ("net/flower: Introduce hardware offload support")
---
 net/sched/cls_flower.c |    1 +
 1 file changed, 1 insertion(+)
net/sched/cls_flower.c +1 -0
@@ -486,6 +486,7 @@ static const struct nla_policy fl_policy
 	[TCA_FLOWER_KEY_ENC_IP_TTL_MASK] = { .type = NLA_U8 },
 	[TCA_FLOWER_KEY_ENC_OPTS]	= { .type = NLA_NESTED },
 	[TCA_FLOWER_KEY_ENC_OPTS_MASK]	= { .type = NLA_NESTED },
+	[TCA_FLOWER_FLAGS]		= { .type = NLA_U32 },
 };
 
 static const struct nla_policy
author maintainer
#7 lore raw

PATCH 7/191 Revert "KVM: nVMX: Use correct root level for nested EPT shadow page tables"

In reply to Greg Kroah-Hartman

This reverts commit 740d876bd9565857a695ce7c05efda4eba5bc585.

---
 arch/x86/kvm/vmx/vmx.c | 3 ---
 1 file changed, 3 deletions(-)
arch/x86/kvm/vmx/vmx.c +0 -3
index 997926a9121c0..3791ce8d269e0 100644
@@ -2968,9 +2968,6 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 static int get_ept_level(struct kvm_vcpu *vcpu)
 {
-	/* Nested EPT currently only supports 4-level walks. */
-	if (is_guest_mode(vcpu) && nested_cpu_has_ept(get_vmcs12(vcpu)))
-		return 4;
 	if (cpu_has_vmx_ept_5levels() && (cpuid_maxphyaddr(vcpu) > 48))
 		return 5;
 	return 4;
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 8/191 Revert "KVM: VMX: Add non-canonical check on writes to RTIT address MSRs"

In reply to Greg Kroah-Hartman

This reverts commit 57211b7366cc2abf784c35e537b256e7fcddc91e.

This patch isn't needed on 4.19 and older.

---
 arch/x86/kvm/vmx/vmx.c | 8033 ----------------------------------------
 1 file changed, 8033 deletions(-)
 delete mode 100644 arch/x86/kvm/vmx/vmx.c
arch/x86/kvm/vmx/vmx.c deleted +0 -8033
deleted file mode 100644
index 3791ce8d269e0..0000000000000
@@ -1,8033 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Kernel-based Virtual Machine driver for Linux
- *
- * This module enables machines with Intel VT-x extensions to run virtual
- * machines without emulation or binary translation.
- *
- * Copyright (C) 2006 Qumranet, Inc.
- * Copyright 2010 Red Hat, Inc. and/or its affiliates.
- *
- * Authors:
- *   Avi Kivity   <[email protected]>
- *   Yaniv Kamay  <[email protected]>
- */
-
-#include <linux/frame.h>
-#include <linux/highmem.h>
-#include <linux/hrtimer.h>
-#include <linux/kernel.h>
-#include <linux/kvm_host.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/mod_devicetable.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/sched/smt.h>
-#include <linux/slab.h>
-#include <linux/tboot.h>
-#include <linux/trace_events.h>
-
-#include <asm/apic.h>
-#include <asm/asm.h>
-#include <asm/cpu.h>
-#include <asm/debugreg.h>
-#include <asm/desc.h>
-#include <asm/fpu/internal.h>
-#include <asm/io.h>
-#include <asm/irq_remapping.h>
-#include <asm/kexec.h>
-#include <asm/perf_event.h>
-#include <asm/mce.h>
-#include <asm/mmu_context.h>
-#include <asm/mshyperv.h>
-#include <asm/spec-ctrl.h>
-#include <asm/virtext.h>
-#include <asm/vmx.h>
-
-#include "capabilities.h"
-#include "cpuid.h"
-#include "evmcs.h"
-#include "irq.h"
-#include "kvm_cache_regs.h"
-#include "lapic.h"
-#include "mmu.h"
-#include "nested.h"
-#include "ops.h"
-#include "pmu.h"
-#include "trace.h"
-#include "vmcs.h"
-#include "vmcs12.h"
-#include "vmx.h"
-#include "x86.h"
-
-MODULE_AUTHOR("Qumranet");
-MODULE_LICENSE("GPL");
-
-static const struct x86_cpu_id vmx_cpu_id[] = {
-	X86_FEATURE_MATCH(X86_FEATURE_VMX),
-	{}
-};
-MODULE_DEVICE_TABLE(x86cpu, vmx_cpu_id);
-
-bool __read_mostly enable_vpid = 1;
-module_param_named(vpid, enable_vpid, bool, 0444);
-
-static bool __read_mostly enable_vnmi = 1;
-module_param_named(vnmi, enable_vnmi, bool, S_IRUGO);
-
-bool __read_mostly flexpriority_enabled = 1;
-module_param_named(flexpriority, flexpriority_enabled, bool, S_IRUGO);
-
-bool __read_mostly enable_ept = 1;
-module_param_named(ept, enable_ept, bool, S_IRUGO);
-
-bool __read_mostly enable_unrestricted_guest = 1;
-module_param_named(unrestricted_guest,
-			enable_unrestricted_guest, bool, S_IRUGO);
-
-bool __read_mostly enable_ept_ad_bits = 1;
-module_param_named(eptad, enable_ept_ad_bits, bool, S_IRUGO);
-
-static bool __read_mostly emulate_invalid_guest_state = true;
-module_param(emulate_invalid_guest_state, bool, S_IRUGO);
-
-static bool __read_mostly fasteoi = 1;
-module_param(fasteoi, bool, S_IRUGO);
-
-static bool __read_mostly enable_apicv = 1;
-module_param(enable_apicv, bool, S_IRUGO);
-
-/*
- * If nested=1, nested virtualization is supported, i.e., guests may use
- * VMX and be a hypervisor for its own guests. If nested=0, guests may not
- * use VMX instructions.
- */
-static bool __read_mostly nested = 1;
-module_param(nested, bool, S_IRUGO);
-
-bool __read_mostly enable_pml = 1;
-module_param_named(pml, enable_pml, bool, S_IRUGO);
-
-static bool __read_mostly dump_invalid_vmcs = 0;
-module_param(dump_invalid_vmcs, bool, 0644);
-
-#define MSR_BITMAP_MODE_X2APIC		1
-#define MSR_BITMAP_MODE_X2APIC_APICV	2
-
-#define KVM_VMX_TSC_MULTIPLIER_MAX     0xffffffffffffffffULL
-
-/* Guest_tsc -> host_tsc conversion requires 64-bit division.  */
-static int __read_mostly cpu_preemption_timer_multi;
-static bool __read_mostly enable_preemption_timer = 1;
-#ifdef CONFIG_X86_64
-module_param_named(preemption_timer, enable_preemption_timer, bool, S_IRUGO);
-#endif
-
-#define KVM_VM_CR0_ALWAYS_OFF (X86_CR0_NW | X86_CR0_CD)
-#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR0_NE
-#define KVM_VM_CR0_ALWAYS_ON				\
-	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | 	\
-	 X86_CR0_WP | X86_CR0_PG | X86_CR0_PE)
-#define KVM_CR4_GUEST_OWNED_BITS				      \
-	(X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR      \
-	 | X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_TSD)
-
-#define KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR4_VMXE
-#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
-#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
-
-#define RMODE_GUEST_OWNED_EFLAGS_BITS (~(X86_EFLAGS_IOPL | X86_EFLAGS_VM))
-
-#define MSR_IA32_RTIT_STATUS_MASK (~(RTIT_STATUS_FILTEREN | \
-	RTIT_STATUS_CONTEXTEN | RTIT_STATUS_TRIGGEREN | \
-	RTIT_STATUS_ERROR | RTIT_STATUS_STOPPED | \
-	RTIT_STATUS_BYTECNT))
-
-#define MSR_IA32_RTIT_OUTPUT_BASE_MASK \
-	(~((1UL << cpuid_query_maxphyaddr(vcpu)) - 1) | 0x7f)
-
-/*
- * These 2 parameters are used to config the controls for Pause-Loop Exiting:
- * ple_gap:    upper bound on the amount of time between two successive
- *             executions of PAUSE in a loop. Also indicate if ple enabled.
- *             According to test, this time is usually smaller than 128 cycles.
- * ple_window: upper bound on the amount of time a guest is allowed to execute
- *             in a PAUSE loop. Tests indicate that most spinlocks are held for
- *             less than 2^12 cycles
- * Time is measured based on a counter that runs at the same rate as the TSC,
- * refer SDM volume 3b section 21.6.13 & 22.1.3.
- */
-static unsigned int ple_gap = KVM_DEFAULT_PLE_GAP;
-module_param(ple_gap, uint, 0444);
-
-static unsigned int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
-module_param(ple_window, uint, 0444);
-
-/* Default doubles per-vcpu window every exit. */
-static unsigned int ple_window_grow = KVM_DEFAULT_PLE_WINDOW_GROW;
-module_param(ple_window_grow, uint, 0444);
-
-/* Default resets per-vcpu window every exit to ple_window. */
-static unsigned int ple_window_shrink = KVM_DEFAULT_PLE_WINDOW_SHRINK;
-module_param(ple_window_shrink, uint, 0444);
-
-/* Default is to compute the maximum so we can never overflow. */
-static unsigned int ple_window_max        = KVM_VMX_DEFAULT_PLE_WINDOW_MAX;
-module_param(ple_window_max, uint, 0444);
-
-/* Default is SYSTEM mode, 1 for host-guest mode */
-int __read_mostly pt_mode = PT_MODE_SYSTEM;
-module_param(pt_mode, int, S_IRUGO);
-
-static DEFINE_STATIC_KEY_FALSE(vmx_l1d_should_flush);
-static DEFINE_STATIC_KEY_FALSE(vmx_l1d_flush_cond);
-static DEFINE_MUTEX(vmx_l1d_flush_mutex);
-
-/* Storage for pre module init parameter parsing */
-static enum vmx_l1d_flush_state __read_mostly vmentry_l1d_flush_param = VMENTER_L1D_FLUSH_AUTO;
-
-static const struct {
-	const char *option;
-	bool for_parse;
-} vmentry_l1d_param[] = {
-	[VMENTER_L1D_FLUSH_AUTO]	 = {"auto", true},
-	[VMENTER_L1D_FLUSH_NEVER]	 = {"never", true},
-	[VMENTER_L1D_FLUSH_COND]	 = {"cond", true},
-	[VMENTER_L1D_FLUSH_ALWAYS]	 = {"always", true},
-	[VMENTER_L1D_FLUSH_EPT_DISABLED] = {"EPT disabled", false},
-	[VMENTER_L1D_FLUSH_NOT_REQUIRED] = {"not required", false},
-};
-
-#define L1D_CACHE_ORDER 4
-static void *vmx_l1d_flush_pages;
-
-static int vmx_setup_l1d_flush(enum vmx_l1d_flush_state l1tf)
-{
-	struct page *page;
-	unsigned int i;
-
-	if (!boot_cpu_has_bug(X86_BUG_L1TF)) {
-		l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_NOT_REQUIRED;
-		return 0;
-	}
-
-	if (!enable_ept) {
-		l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_EPT_DISABLED;
-		return 0;
-	}
-
-	if (boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES)) {
-		u64 msr;
-
-		rdmsrl(MSR_IA32_ARCH_CAPABILITIES, msr);
-		if (msr & ARCH_CAP_SKIP_VMENTRY_L1DFLUSH) {
-			l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_NOT_REQUIRED;
-			return 0;
-		}
-	}
-
-	/* If set to auto use the default l1tf mitigation method */
-	if (l1tf == VMENTER_L1D_FLUSH_AUTO) {
-		switch (l1tf_mitigation) {
-		case L1TF_MITIGATION_OFF:
-			l1tf = VMENTER_L1D_FLUSH_NEVER;
-			break;
-		case L1TF_MITIGATION_FLUSH_NOWARN:
-		case L1TF_MITIGATION_FLUSH:
-		case L1TF_MITIGATION_FLUSH_NOSMT:
-			l1tf = VMENTER_L1D_FLUSH_COND;
-			break;
-		case L1TF_MITIGATION_FULL:
-		case L1TF_MITIGATION_FULL_FORCE:
-			l1tf = VMENTER_L1D_FLUSH_ALWAYS;
-			break;
-		}
-	} else if (l1tf_mitigation == L1TF_MITIGATION_FULL_FORCE) {
-		l1tf = VMENTER_L1D_FLUSH_ALWAYS;
-	}
-
-	if (l1tf != VMENTER_L1D_FLUSH_NEVER && !vmx_l1d_flush_pages &&
-	    !boot_cpu_has(X86_FEATURE_FLUSH_L1D)) {
-		/*
-		 * This allocation for vmx_l1d_flush_pages is not tied to a VM
-		 * lifetime and so should not be charged to a memcg.
-		 */
-		page = alloc_pages(GFP_KERNEL, L1D_CACHE_ORDER);
-		if (!page)
-			return -ENOMEM;
-		vmx_l1d_flush_pages = page_address(page);
-
-		/*
-		 * Initialize each page with a different pattern in
-		 * order to protect against KSM in the nested
-		 * virtualization case.
-		 */
-		for (i = 0; i < 1u << L1D_CACHE_ORDER; ++i) {
-			memset(vmx_l1d_flush_pages + i * PAGE_SIZE, i + 1,
-			       PAGE_SIZE);
-		}
-	}
-
-	l1tf_vmx_mitigation = l1tf;
-
-	if (l1tf != VMENTER_L1D_FLUSH_NEVER)
-		static_branch_enable(&vmx_l1d_should_flush);
-	else
-		static_branch_disable(&vmx_l1d_should_flush);
-
-	if (l1tf == VMENTER_L1D_FLUSH_COND)
-		static_branch_enable(&vmx_l1d_flush_cond);
-	else
-		static_branch_disable(&vmx_l1d_flush_cond);
-	return 0;
-}
-
-static int vmentry_l1d_flush_parse(const char *s)
-{
-	unsigned int i;
-
-	if (s) {
-		for (i = 0; i < ARRAY_SIZE(vmentry_l1d_param); i++) {
-			if (vmentry_l1d_param[i].for_parse &&
-			    sysfs_streq(s, vmentry_l1d_param[i].option))
-				return i;
-		}
-	}
-	return -EINVAL;
-}
-
-static int vmentry_l1d_flush_set(const char *s, const struct kernel_param *kp)
-{
-	int l1tf, ret;
-
-	l1tf = vmentry_l1d_flush_parse(s);
-	if (l1tf < 0)
-		return l1tf;
-
-	if (!boot_cpu_has(X86_BUG_L1TF))
-		return 0;
-
-	/*
-	 * Has vmx_init() run already? If not then this is the pre init
-	 * parameter parsing. In that case just store the value and let
-	 * vmx_init() do the proper setup after enable_ept has been
-	 * established.
-	 */
-	if (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_AUTO) {
-		vmentry_l1d_flush_param = l1tf;
-		return 0;
-	}
-
-	mutex_lock(&vmx_l1d_flush_mutex);
-	ret = vmx_setup_l1d_flush(l1tf);
-	mutex_unlock(&vmx_l1d_flush_mutex);
-	return ret;
-}
-
-static int vmentry_l1d_flush_get(char *s, const struct kernel_param *kp)
-{
-	if (WARN_ON_ONCE(l1tf_vmx_mitigation >= ARRAY_SIZE(vmentry_l1d_param)))
-		return sprintf(s, "???\n");
-
-	return sprintf(s, "%s\n", vmentry_l1d_param[l1tf_vmx_mitigation].option);
-}
-
-static const struct kernel_param_ops vmentry_l1d_flush_ops = {
-	.set = vmentry_l1d_flush_set,
-	.get = vmentry_l1d_flush_get,
-};
-module_param_cb(vmentry_l1d_flush, &vmentry_l1d_flush_ops, NULL, 0644);
-
-static bool guest_state_valid(struct kvm_vcpu *vcpu);
-static u32 vmx_segment_access_rights(struct kvm_segment *var);
-static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
-							  u32 msr, int type);
-
-void vmx_vmexit(void);
-
-#define vmx_insn_failed(fmt...)		\
-do {					\
-	WARN_ONCE(1, fmt);		\
-	pr_warn_ratelimited(fmt);	\
-} while (0)
-
-asmlinkage void vmread_error(unsigned long field, bool fault)
-{
-	if (fault)
-		kvm_spurious_fault();
-	else
-		vmx_insn_failed("kvm: vmread failed: field=%lx\n", field);
-}
-
-noinline void vmwrite_error(unsigned long field, unsigned long value)
-{
-	vmx_insn_failed("kvm: vmwrite failed: field=%lx val=%lx err=%d\n",
-			field, value, vmcs_read32(VM_INSTRUCTION_ERROR));
-}
-
-noinline void vmclear_error(struct vmcs *vmcs, u64 phys_addr)
-{
-	vmx_insn_failed("kvm: vmclear failed: %p/%llx\n", vmcs, phys_addr);
-}
-
-noinline void vmptrld_error(struct vmcs *vmcs, u64 phys_addr)
-{
-	vmx_insn_failed("kvm: vmptrld failed: %p/%llx\n", vmcs, phys_addr);
-}
-
-noinline void invvpid_error(unsigned long ext, u16 vpid, gva_t gva)
-{
-	vmx_insn_failed("kvm: invvpid failed: ext=0x%lx vpid=%u gva=0x%lx\n",
-			ext, vpid, gva);
-}
-
-noinline void invept_error(unsigned long ext, u64 eptp, gpa_t gpa)
-{
-	vmx_insn_failed("kvm: invept failed: ext=0x%lx eptp=%llx gpa=0x%llx\n",
-			ext, eptp, gpa);
-}
-
-static DEFINE_PER_CPU(struct vmcs *, vmxarea);
-DEFINE_PER_CPU(struct vmcs *, current_vmcs);
-/*
- * We maintain a per-CPU linked-list of VMCS loaded on that CPU. This is needed
- * when a CPU is brought down, and we need to VMCLEAR all VMCSs loaded on it.
- */
-static DEFINE_PER_CPU(struct list_head, loaded_vmcss_on_cpu);
-
-/*
- * We maintian a per-CPU linked-list of vCPU, so in wakeup_handler() we
- * can find which vCPU should be waken up.
- */
-static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu);
-static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock);
-
-static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS);
-static DEFINE_SPINLOCK(vmx_vpid_lock);
-
-struct vmcs_config vmcs_config;
-struct vmx_capability vmx_capability;
-
-#define VMX_SEGMENT_FIELD(seg)					\
-	[VCPU_SREG_##seg] = {                                   \
-		.selector = GUEST_##seg##_SELECTOR,		\
-		.base = GUEST_##seg##_BASE,		   	\
-		.limit = GUEST_##seg##_LIMIT,		   	\
-		.ar_bytes = GUEST_##seg##_AR_BYTES,	   	\
-	}
-
-static const struct kvm_vmx_segment_field {
-	unsigned selector;
-	unsigned base;
-	unsigned limit;
-	unsigned ar_bytes;
-} kvm_vmx_segment_fields[] = {
-	VMX_SEGMENT_FIELD(CS),
-	VMX_SEGMENT_FIELD(DS),
-	VMX_SEGMENT_FIELD(ES),
-	VMX_SEGMENT_FIELD(FS),
-	VMX_SEGMENT_FIELD(GS),
-	VMX_SEGMENT_FIELD(SS),
-	VMX_SEGMENT_FIELD(TR),
-	VMX_SEGMENT_FIELD(LDTR),
-};
-
-u64 host_efer;
-static unsigned long host_idt_base;
-
-/*
- * Though SYSCALL is only supported in 64-bit mode on Intel CPUs, kvm
- * will emulate SYSCALL in legacy mode if the vendor string in guest
- * CPUID.0:{EBX,ECX,EDX} is "AuthenticAMD" or "AMDisbetter!" To
- * support this emulation, IA32_STAR must always be included in
- * vmx_msr_index[], even in i386 builds.
- */
-const u32 vmx_msr_index[] = {
-#ifdef CONFIG_X86_64
-	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR,
-#endif
-	MSR_EFER, MSR_TSC_AUX, MSR_STAR,
-	MSR_IA32_TSX_CTRL,
-};
-
-#if IS_ENABLED(CONFIG_HYPERV)
-static bool __read_mostly enlightened_vmcs = true;
-module_param(enlightened_vmcs, bool, 0444);
-
-/* check_ept_pointer() should be under protection of ept_pointer_lock. */
-static void check_ept_pointer_match(struct kvm *kvm)
-{
-	struct kvm_vcpu *vcpu;
-	u64 tmp_eptp = INVALID_PAGE;
-	int i;
-
-	kvm_for_each_vcpu(i, vcpu, kvm) {
-		if (!VALID_PAGE(tmp_eptp)) {
-			tmp_eptp = to_vmx(vcpu)->ept_pointer;
-		} else if (tmp_eptp != to_vmx(vcpu)->ept_pointer) {
-			to_kvm_vmx(kvm)->ept_pointers_match
-				= EPT_POINTERS_MISMATCH;
-			return;
-		}
-	}
-
-	to_kvm_vmx(kvm)->ept_pointers_match = EPT_POINTERS_MATCH;
-}
-
-static int kvm_fill_hv_flush_list_func(struct hv_guest_mapping_flush_list *flush,
-		void *data)
-{
-	struct kvm_tlb_range *range = data;
-
-	return hyperv_fill_flush_guest_mapping_list(flush, range->start_gfn,
-			range->pages);
-}
-
-static inline int __hv_remote_flush_tlb_with_range(struct kvm *kvm,
-		struct kvm_vcpu *vcpu, struct kvm_tlb_range *range)
-{
-	u64 ept_pointer = to_vmx(vcpu)->ept_pointer;
-
-	/*
-	 * FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE hypercall needs address
-	 * of the base of EPT PML4 table, strip off EPT configuration
-	 * information.
-	 */
-	if (range)
-		return hyperv_flush_guest_mapping_range(ept_pointer & PAGE_MASK,
-				kvm_fill_hv_flush_list_func, (void *)range);
-	else
-		return hyperv_flush_guest_mapping(ept_pointer & PAGE_MASK);
-}
-
-static int hv_remote_flush_tlb_with_range(struct kvm *kvm,
-		struct kvm_tlb_range *range)
-{
-	struct kvm_vcpu *vcpu;
-	int ret = 0, i;
-
-	spin_lock(&to_kvm_vmx(kvm)->ept_pointer_lock);
-
-	if (to_kvm_vmx(kvm)->ept_pointers_match == EPT_POINTERS_CHECK)
-		check_ept_pointer_match(kvm);
-
-	if (to_kvm_vmx(kvm)->ept_pointers_match != EPT_POINTERS_MATCH) {
-		kvm_for_each_vcpu(i, vcpu, kvm) {
-			/* If ept_pointer is invalid pointer, bypass flush request. */
-			if (VALID_PAGE(to_vmx(vcpu)->ept_pointer))
-				ret |= __hv_remote_flush_tlb_with_range(
-					kvm, vcpu, range);
-		}
-	} else {
-		ret = __hv_remote_flush_tlb_with_range(kvm,
-				kvm_get_vcpu(kvm, 0), range);
-	}
-
-	spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock);
-	return ret;
-}
-static int hv_remote_flush_tlb(struct kvm *kvm)
-{
-	return hv_remote_flush_tlb_with_range(kvm, NULL);
-}
-
-static int hv_enable_direct_tlbflush(struct kvm_vcpu *vcpu)
-{
-	struct hv_enlightened_vmcs *evmcs;
-	struct hv_partition_assist_pg **p_hv_pa_pg =
-			&vcpu->kvm->arch.hyperv.hv_pa_pg;
-	/*
-	 * Synthetic VM-Exit is not enabled in current code and so All
-	 * evmcs in singe VM shares same assist page.
-	 */
-	if (!*p_hv_pa_pg)
-		*p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL);
-
-	if (!*p_hv_pa_pg)
-		return -ENOMEM;
-
-	evmcs = (struct hv_enlightened_vmcs *)to_vmx(vcpu)->loaded_vmcs->vmcs;
-
-	evmcs->partition_assist_page =
-		__pa(*p_hv_pa_pg);
-	evmcs->hv_vm_id = (unsigned long)vcpu->kvm;
-	evmcs->hv_enlightenments_control.nested_flush_hypercall = 1;
-
-	return 0;
-}
-
-#endif /* IS_ENABLED(CONFIG_HYPERV) */
-
-/*
- * Comment's format: document - errata name - stepping - processor name.
- * Refer from
- * https://www.virtualbox.org/svn/vbox/trunk/src/VBox/VMM/VMMR0/HMR0.cpp
- */
-static u32 vmx_preemption_cpu_tfms[] = {
-/* 323344.pdf - BA86   - D0 - Xeon 7500 Series */
-0x000206E6,
-/* 323056.pdf - AAX65  - C2 - Xeon L3406 */
-/* 322814.pdf - AAT59  - C2 - i7-600, i5-500, i5-400 and i3-300 Mobile */
-/* 322911.pdf - AAU65  - C2 - i5-600, i3-500 Desktop and Pentium G6950 */
-0x00020652,
-/* 322911.pdf - AAU65  - K0 - i5-600, i3-500 Desktop and Pentium G6950 */
-0x00020655,
-/* 322373.pdf - AAO95  - B1 - Xeon 3400 Series */
-/* 322166.pdf - AAN92  - B1 - i7-800 and i5-700 Desktop */
-/*
- * 320767.pdf - AAP86  - B1 -
- * i7-900 Mobile Extreme, i7-800 and i7-700 Mobile
- */
-0x000106E5,
-/* 321333.pdf - AAM126 - C0 - Xeon 3500 */
-0x000106A0,
-/* 321333.pdf - AAM126 - C1 - Xeon 3500 */
-0x000106A1,
-/* 320836.pdf - AAJ124 - C0 - i7-900 Desktop Extreme and i7-900 Desktop */
-0x000106A4,
- /* 321333.pdf - AAM126 - D0 - Xeon 3500 */
- /* 321324.pdf - AAK139 - D0 - Xeon 5500 */
- /* 320836.pdf - AAJ124 - D0 - i7-900 Extreme and i7-900 Desktop */
-0x000106A5,
- /* Xeon E3-1220 V2 */
-0x000306A8,
-};
-
-static inline bool cpu_has_broken_vmx_preemption_timer(void)
-{
-	u32 eax = cpuid_eax(0x00000001), i;
-
-	/* Clear the reserved bits */
-	eax &= ~(0x3U << 14 | 0xfU << 28);
-	for (i = 0; i < ARRAY_SIZE(vmx_preemption_cpu_tfms); i++)
-		if (eax == vmx_preemption_cpu_tfms[i])
-			return true;
-
-	return false;
-}
-
-static inline bool cpu_need_virtualize_apic_accesses(struct kvm_vcpu *vcpu)
-{
-	return flexpriority_enabled && lapic_in_kernel(vcpu);
-}
-
-static inline bool report_flexpriority(void)
-{
-	return flexpriority_enabled;
-}
-
-static inline int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
-{
-	int i;
-
-	for (i = 0; i < vmx->nmsrs; ++i)
-		if (vmx_msr_index[vmx->guest_msrs[i].index] == msr)
-			return i;
-	return -1;
-}
-
-struct shared_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
-{
-	int i;
-
-	i = __find_msr_index(vmx, msr);
-	if (i >= 0)
-		return &vmx->guest_msrs[i];
-	return NULL;
-}
-
-static int vmx_set_guest_msr(struct vcpu_vmx *vmx, struct shared_msr_entry *msr, u64 data)
-{
-	int ret = 0;
-
-	u64 old_msr_data = msr->data;
-	msr->data = data;
-	if (msr - vmx->guest_msrs < vmx->save_nmsrs) {
-		preempt_disable();
-		ret = kvm_set_shared_msr(msr->index, msr->data,
-					 msr->mask);
-		preempt_enable();
-		if (ret)
-			msr->data = old_msr_data;
-	}
-	return ret;
-}
-
-void loaded_vmcs_init(struct loaded_vmcs *loaded_vmcs)
-{
-	vmcs_clear(loaded_vmcs->vmcs);
-	if (loaded_vmcs->shadow_vmcs && loaded_vmcs->launched)
-		vmcs_clear(loaded_vmcs->shadow_vmcs);
-	loaded_vmcs->cpu = -1;
-	loaded_vmcs->launched = 0;
-}
-
-#ifdef CONFIG_KEXEC_CORE
-/*
- * This bitmap is used to indicate whether the vmclear
- * operation is enabled on all cpus. All disabled by
- * default.
- */
-static cpumask_t crash_vmclear_enabled_bitmap = CPU_MASK_NONE;
-
-static inline void crash_enable_local_vmclear(int cpu)
-{
-	cpumask_set_cpu(cpu, &crash_vmclear_enabled_bitmap);
-}
-
-static inline void crash_disable_local_vmclear(int cpu)
-{
-	cpumask_clear_cpu(cpu, &crash_vmclear_enabled_bitmap);
-}
-
-static inline int crash_local_vmclear_enabled(int cpu)
-{
-	return cpumask_test_cpu(cpu, &crash_vmclear_enabled_bitmap);
-}
-
-static void crash_vmclear_local_loaded_vmcss(void)
-{
-	int cpu = raw_smp_processor_id();
-	struct loaded_vmcs *v;
-
-	if (!crash_local_vmclear_enabled(cpu))
-		return;
-
-	list_for_each_entry(v, &per_cpu(loaded_vmcss_on_cpu, cpu),
-			    loaded_vmcss_on_cpu_link)
-		vmcs_clear(v->vmcs);
-}
-#else
-static inline void crash_enable_local_vmclear(int cpu) { }
-static inline void crash_disable_local_vmclear(int cpu) { }
-#endif /* CONFIG_KEXEC_CORE */
-
-static void __loaded_vmcs_clear(void *arg)
-{
-	struct loaded_vmcs *loaded_vmcs = arg;
-	int cpu = raw_smp_processor_id();
-
-	if (loaded_vmcs->cpu != cpu)
-		return; /* vcpu migration can race with cpu offline */
-	if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs)
-		per_cpu(current_vmcs, cpu) = NULL;
-	crash_disable_local_vmclear(cpu);
-	list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link);
-
-	/*
-	 * we should ensure updating loaded_vmcs->loaded_vmcss_on_cpu_link
-	 * is before setting loaded_vmcs->vcpu to -1 which is done in
-	 * loaded_vmcs_init. Otherwise, other cpu can see vcpu = -1 fist
-	 * then adds the vmcs into percpu list before it is deleted.
-	 */
-	smp_wmb();
-
-	loaded_vmcs_init(loaded_vmcs);
-	crash_enable_local_vmclear(cpu);
-}
-
-void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs)
-{
-	int cpu = loaded_vmcs->cpu;
-
-	if (cpu != -1)
-		smp_call_function_single(cpu,
-			 __loaded_vmcs_clear, loaded_vmcs, 1);
-}
-
-static bool vmx_segment_cache_test_set(struct vcpu_vmx *vmx, unsigned seg,
-				       unsigned field)
-{
-	bool ret;
-	u32 mask = 1 << (seg * SEG_FIELD_NR + field);
-
-	if (!kvm_register_is_available(&vmx->vcpu, VCPU_EXREG_SEGMENTS)) {
-		kvm_register_mark_available(&vmx->vcpu, VCPU_EXREG_SEGMENTS);
-		vmx->segment_cache.bitmask = 0;
-	}
-	ret = vmx->segment_cache.bitmask & mask;
-	vmx->segment_cache.bitmask |= mask;
-	return ret;
-}
-
-static u16 vmx_read_guest_seg_selector(struct vcpu_vmx *vmx, unsigned seg)
-{
-	u16 *p = &vmx->segment_cache.seg[seg].selector;
-
-	if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_SEL))
-		*p = vmcs_read16(kvm_vmx_segment_fields[seg].selector);
-	return *p;
-}
-
-static ulong vmx_read_guest_seg_base(struct vcpu_vmx *vmx, unsigned seg)
-{
-	ulong *p = &vmx->segment_cache.seg[seg].base;
-
-	if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_BASE))
-		*p = vmcs_readl(kvm_vmx_segment_fields[seg].base);
-	return *p;
-}
-
-static u32 vmx_read_guest_seg_limit(struct vcpu_vmx *vmx, unsigned seg)
-{
-	u32 *p = &vmx->segment_cache.seg[seg].limit;
-
-	if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_LIMIT))
-		*p = vmcs_read32(kvm_vmx_segment_fields[seg].limit);
-	return *p;
-}
-
-static u32 vmx_read_guest_seg_ar(struct vcpu_vmx *vmx, unsigned seg)
-{
-	u32 *p = &vmx->segment_cache.seg[seg].ar;
-
-	if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_AR))
-		*p = vmcs_read32(kvm_vmx_segment_fields[seg].ar_bytes);
-	return *p;
-}
-
-void update_exception_bitmap(struct kvm_vcpu *vcpu)
-{
-	u32 eb;
-
-	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) |
-	     (1u << DB_VECTOR) | (1u << AC_VECTOR);
-	/*
-	 * Guest access to VMware backdoor ports could legitimately
-	 * trigger #GP because of TSS I/O permission bitmap.
-	 * We intercept those #GP and allow access to them anyway
-	 * as VMware does.
-	 */
-	if (enable_vmware_backdoor)
-		eb |= (1u << GP_VECTOR);
-	if ((vcpu->guest_debug &
-	     (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) ==
-	    (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP))
-		eb |= 1u << BP_VECTOR;
-	if (to_vmx(vcpu)->rmode.vm86_active)
-		eb = ~0;
-	if (enable_ept)
-		eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
-
-	/* When we are running a nested L2 guest and L1 specified for it a
-	 * certain exception bitmap, we must trap the same exceptions and pass
-	 * them to L1. When running L2, we will only handle the exceptions
-	 * specified above if L1 did not want them.
-	 */
-	if (is_guest_mode(vcpu))
-		eb |= get_vmcs12(vcpu)->exception_bitmap;
-
-	vmcs_write32(EXCEPTION_BITMAP, eb);
-}
-
-/*
- * Check if MSR is intercepted for currently loaded MSR bitmap.
- */
-static bool msr_write_intercepted(struct kvm_vcpu *vcpu, u32 msr)
-{
-	unsigned long *msr_bitmap;
-	int f = sizeof(unsigned long);
-
-	if (!cpu_has_vmx_msr_bitmap())
-		return true;
-
-	msr_bitmap = to_vmx(vcpu)->loaded_vmcs->msr_bitmap;
-
-	if (msr <= 0x1fff) {
-		return !!test_bit(msr, msr_bitmap + 0x800 / f);
-	} else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) {
-		msr &= 0x1fff;
-		return !!test_bit(msr, msr_bitmap + 0xc00 / f);
-	}
-
-	return true;
-}
-
-static void clear_atomic_switch_msr_special(struct vcpu_vmx *vmx,
-		unsigned long entry, unsigned long exit)
-{
-	vm_entry_controls_clearbit(vmx, entry);
-	vm_exit_controls_clearbit(vmx, exit);
-}
-
-int vmx_find_msr_index(struct vmx_msrs *m, u32 msr)
-{
-	unsigned int i;
-
-	for (i = 0; i < m->nr; ++i) {
-		if (m->val[i].index == msr)
-			return i;
-	}
-	return -ENOENT;
-}
-
-static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
-{
-	int i;
-	struct msr_autoload *m = &vmx->msr_autoload;
-
-	switch (msr) {
-	case MSR_EFER:
-		if (cpu_has_load_ia32_efer()) {
-			clear_atomic_switch_msr_special(vmx,
-					VM_ENTRY_LOAD_IA32_EFER,
-					VM_EXIT_LOAD_IA32_EFER);
-			return;
-		}
-		break;
-	case MSR_CORE_PERF_GLOBAL_CTRL:
-		if (cpu_has_load_perf_global_ctrl()) {
-			clear_atomic_switch_msr_special(vmx,
-					VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
-					VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
-			return;
-		}
-		break;
-	}
-	i = vmx_find_msr_index(&m->guest, msr);
-	if (i < 0)
-		goto skip_guest;
-	--m->guest.nr;
-	m->guest.val[i] = m->guest.val[m->guest.nr];
-	vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->guest.nr);
-
-skip_guest:
-	i = vmx_find_msr_index(&m->host, msr);
-	if (i < 0)
-		return;
-
-	--m->host.nr;
-	m->host.val[i] = m->host.val[m->host.nr];
-	vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->host.nr);
-}
-
-static void add_atomic_switch_msr_special(struct vcpu_vmx *vmx,
-		unsigned long entry, unsigned long exit,
-		unsigned long guest_val_vmcs, unsigned long host_val_vmcs,
-		u64 guest_val, u64 host_val)
-{
-	vmcs_write64(guest_val_vmcs, guest_val);
-	if (host_val_vmcs != HOST_IA32_EFER)
-		vmcs_write64(host_val_vmcs, host_val);
-	vm_entry_controls_setbit(vmx, entry);
-	vm_exit_controls_setbit(vmx, exit);
-}
-
-static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
-				  u64 guest_val, u64 host_val, bool entry_only)
-{
-	int i, j = 0;
-	struct msr_autoload *m = &vmx->msr_autoload;
-
-	switch (msr) {
-	case MSR_EFER:
-		if (cpu_has_load_ia32_efer()) {
-			add_atomic_switch_msr_special(vmx,
-					VM_ENTRY_LOAD_IA32_EFER,
-					VM_EXIT_LOAD_IA32_EFER,
-					GUEST_IA32_EFER,
-					HOST_IA32_EFER,
-					guest_val, host_val);
-			return;
-		}
-		break;
-	case MSR_CORE_PERF_GLOBAL_CTRL:
-		if (cpu_has_load_perf_global_ctrl()) {
-			add_atomic_switch_msr_special(vmx,
-					VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
-					VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL,
-					GUEST_IA32_PERF_GLOBAL_CTRL,
-					HOST_IA32_PERF_GLOBAL_CTRL,
-					guest_val, host_val);
-			return;
-		}
-		break;
-	case MSR_IA32_PEBS_ENABLE:
-		/* PEBS needs a quiescent period after being disabled (to write
-		 * a record).  Disabling PEBS through VMX MSR swapping doesn't
-		 * provide that period, so a CPU could write host's record into
-		 * guest's memory.
-		 */
-		wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
-	}
-
-	i = vmx_find_msr_index(&m->guest, msr);
-	if (!entry_only)
-		j = vmx_find_msr_index(&m->host, msr);
-
-	if ((i < 0 && m->guest.nr == NR_LOADSTORE_MSRS) ||
-		(j < 0 &&  m->host.nr == NR_LOADSTORE_MSRS)) {
-		printk_once(KERN_WARNING "Not enough msr switch entries. "
-				"Can't add msr %x\n", msr);
-		return;
-	}
-	if (i < 0) {
-		i = m->guest.nr++;
-		vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->guest.nr);
-	}
-	m->guest.val[i].index = msr;
-	m->guest.val[i].value = guest_val;
-
-	if (entry_only)
-		return;
-
-	if (j < 0) {
-		j = m->host.nr++;
-		vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->host.nr);
-	}
-	m->host.val[j].index = msr;
-	m->host.val[j].value = host_val;
-}
-
-static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
-{
-	u64 guest_efer = vmx->vcpu.arch.efer;
-	u64 ignore_bits = 0;
-
-	/* Shadow paging assumes NX to be available.  */
-	if (!enable_ept)
-		guest_efer |= EFER_NX;
-
-	/*
-	 * LMA and LME handled by hardware; SCE meaningless outside long mode.
-	 */
-	ignore_bits |= EFER_SCE;
-#ifdef CONFIG_X86_64
-	ignore_bits |= EFER_LMA | EFER_LME;
-	/* SCE is meaningful only in long mode on Intel */
-	if (guest_efer & EFER_LMA)
-		ignore_bits &= ~(u64)EFER_SCE;
-#endif
-
-	/*
-	 * On EPT, we can't emulate NX, so we must switch EFER atomically.
-	 * On CPUs that support "load IA32_EFER", always switch EFER
-	 * atomically, since it's faster than switching it manually.
-	 */
-	if (cpu_has_load_ia32_efer() ||
-	    (enable_ept && ((vmx->vcpu.arch.efer ^ host_efer) & EFER_NX))) {
-		if (!(guest_efer & EFER_LMA))
-			guest_efer &= ~EFER_LME;
-		if (guest_efer != host_efer)
-			add_atomic_switch_msr(vmx, MSR_EFER,
-					      guest_efer, host_efer, false);
-		else
-			clear_atomic_switch_msr(vmx, MSR_EFER);
-		return false;
-	} else {
-		clear_atomic_switch_msr(vmx, MSR_EFER);
-
-		guest_efer &= ~ignore_bits;
-		guest_efer |= host_efer & ignore_bits;
-
-		vmx->guest_msrs[efer_offset].data = guest_efer;
-		vmx->guest_msrs[efer_offset].mask = ~ignore_bits;
-
-		return true;
-	}
-}
-
-#ifdef CONFIG_X86_32
-/*
- * On 32-bit kernels, VM exits still load the FS and GS bases from the
- * VMCS rather than the segment table.  KVM uses this helper to figure
- * out the current bases to poke them into the VMCS before entry.
- */
-static unsigned long segment_base(u16 selector)
-{
-	struct desc_struct *table;
-	unsigned long v;
-
-	if (!(selector & ~SEGMENT_RPL_MASK))
-		return 0;
-
-	table = get_current_gdt_ro();
-
-	if ((selector & SEGMENT_TI_MASK) == SEGMENT_LDT) {
-		u16 ldt_selector = kvm_read_ldt();
-
-		if (!(ldt_selector & ~SEGMENT_RPL_MASK))
-			return 0;
-
-		table = (struct desc_struct *)segment_base(ldt_selector);
-	}
-	v = get_desc_base(&table[selector >> 3]);
-	return v;
-}
-#endif
-
-static inline void pt_load_msr(struct pt_ctx *ctx, u32 addr_range)
-{
-	u32 i;
-
-	wrmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
-	wrmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
-	wrmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
-	wrmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
-	for (i = 0; i < addr_range; i++) {
-		wrmsrl(MSR_IA32_RTIT_ADDR0_A + i * 2, ctx->addr_a[i]);
-		wrmsrl(MSR_IA32_RTIT_ADDR0_B + i * 2, ctx->addr_b[i]);
-	}
-}
-
-static inline void pt_save_msr(struct pt_ctx *ctx, u32 addr_range)
-{
-	u32 i;
-
-	rdmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
-	rdmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
-	rdmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
-	rdmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
-	for (i = 0; i < addr_range; i++) {
-		rdmsrl(MSR_IA32_RTIT_ADDR0_A + i * 2, ctx->addr_a[i]);
-		rdmsrl(MSR_IA32_RTIT_ADDR0_B + i * 2, ctx->addr_b[i]);
-	}
-}
-
-static void pt_guest_enter(struct vcpu_vmx *vmx)
-{
-	if (pt_mode == PT_MODE_SYSTEM)
-		return;
-
-	/*
-	 * GUEST_IA32_RTIT_CTL is already set in the VMCS.
-	 * Save host state before VM entry.
-	 */
-	rdmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
-	if (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) {
-		wrmsrl(MSR_IA32_RTIT_CTL, 0);
-		pt_save_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_range);
-		pt_load_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_range);
-	}
-}
-
-static void pt_guest_exit(struct vcpu_vmx *vmx)
-{
-	if (pt_mode == PT_MODE_SYSTEM)
-		return;
-
-	if (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) {
-		pt_save_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_range);
-		pt_load_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_range);
-	}
-
-	/* Reload host state (IA32_RTIT_CTL will be cleared on VM exit). */
-	wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
-}
-
-void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel,
-			unsigned long fs_base, unsigned long gs_base)
-{
-	if (unlikely(fs_sel != host->fs_sel)) {
-		if (!(fs_sel & 7))
-			vmcs_write16(HOST_FS_SELECTOR, fs_sel);
-		else
-			vmcs_write16(HOST_FS_SELECTOR, 0);
-		host->fs_sel = fs_sel;
-	}
-	if (unlikely(gs_sel != host->gs_sel)) {
-		if (!(gs_sel & 7))
-			vmcs_write16(HOST_GS_SELECTOR, gs_sel);
-		else
-			vmcs_write16(HOST_GS_SELECTOR, 0);
-		host->gs_sel = gs_sel;
-	}
-	if (unlikely(fs_base != host->fs_base)) {
-		vmcs_writel(HOST_FS_BASE, fs_base);
-		host->fs_base = fs_base;
-	}
-	if (unlikely(gs_base != host->gs_base)) {
-		vmcs_writel(HOST_GS_BASE, gs_base);
-		host->gs_base = gs_base;
-	}
-}
-
-void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct vmcs_host_state *host_state;
-#ifdef CONFIG_X86_64
-	int cpu = raw_smp_processor_id();
-#endif
-	unsigned long fs_base, gs_base;
-	u16 fs_sel, gs_sel;
-	int i;
-
-	vmx->req_immediate_exit = false;
-
-	/*
-	 * Note that guest MSRs to be saved/restored can also be changed
-	 * when guest state is loaded. This happens when guest transitions
-	 * to/from long-mode by setting MSR_EFER.LMA.
-	 */
-	if (!vmx->guest_msrs_ready) {
-		vmx->guest_msrs_ready = true;
-		for (i = 0; i < vmx->save_nmsrs; ++i)
-			kvm_set_shared_msr(vmx->guest_msrs[i].index,
-					   vmx->guest_msrs[i].data,
-					   vmx->guest_msrs[i].mask);
-
-	}
-	if (vmx->guest_state_loaded)
-		return;
-
-	host_state = &vmx->loaded_vmcs->host_state;
-
-	/*
-	 * Set host fs and gs selectors.  Unfortunately, 22.2.3 does not
-	 * allow segment selectors with cpl > 0 or ti == 1.
-	 */
-	host_state->ldt_sel = kvm_read_ldt();
-
-#ifdef CONFIG_X86_64
-	savesegment(ds, host_state->ds_sel);
-	savesegment(es, host_state->es_sel);
-
-	gs_base = cpu_kernelmode_gs_base(cpu);
-	if (likely(is_64bit_mm(current->mm))) {
-		save_fsgs_for_kvm();
-		fs_sel = current->thread.fsindex;
-		gs_sel = current->thread.gsindex;
-		fs_base = current->thread.fsbase;
-		vmx->msr_host_kernel_gs_base = current->thread.gsbase;
-	} else {
-		savesegment(fs, fs_sel);
-		savesegment(gs, gs_sel);
-		fs_base = read_msr(MSR_FS_BASE);
-		vmx->msr_host_kernel_gs_base = read_msr(MSR_KERNEL_GS_BASE);
-	}
-
-	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-#else
-	savesegment(fs, fs_sel);
-	savesegment(gs, gs_sel);
-	fs_base = segment_base(fs_sel);
-	gs_base = segment_base(gs_sel);
-#endif
-
-	vmx_set_host_fs_gs(host_state, fs_sel, gs_sel, fs_base, gs_base);
-	vmx->guest_state_loaded = true;
-}
-
-static void vmx_prepare_switch_to_host(struct vcpu_vmx *vmx)
-{
-	struct vmcs_host_state *host_state;
-
-	if (!vmx->guest_state_loaded)
-		return;
-
-	host_state = &vmx->loaded_vmcs->host_state;
-
-	++vmx->vcpu.stat.host_state_reload;
-
-#ifdef CONFIG_X86_64
-	rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-#endif
-	if (host_state->ldt_sel || (host_state->gs_sel & 7)) {
-		kvm_load_ldt(host_state->ldt_sel);
-#ifdef CONFIG_X86_64
-		load_gs_index(host_state->gs_sel);
-#else
-		loadsegment(gs, host_state->gs_sel);
-#endif
-	}
-	if (host_state->fs_sel & 7)
-		loadsegment(fs, host_state->fs_sel);
-#ifdef CONFIG_X86_64
-	if (unlikely(host_state->ds_sel | host_state->es_sel)) {
-		loadsegment(ds, host_state->ds_sel);
-		loadsegment(es, host_state->es_sel);
-	}
-#endif
-	invalidate_tss_limit();
-#ifdef CONFIG_X86_64
-	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
-#endif
-	load_fixmap_gdt(raw_smp_processor_id());
-	vmx->guest_state_loaded = false;
-	vmx->guest_msrs_ready = false;
-}
-
-#ifdef CONFIG_X86_64
-static u64 vmx_read_guest_kernel_gs_base(struct vcpu_vmx *vmx)
-{
-	preempt_disable();
-	if (vmx->guest_state_loaded)
-		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-	preempt_enable();
-	return vmx->msr_guest_kernel_gs_base;
-}
-
-static void vmx_write_guest_kernel_gs_base(struct vcpu_vmx *vmx, u64 data)
-{
-	preempt_disable();
-	if (vmx->guest_state_loaded)
-		wrmsrl(MSR_KERNEL_GS_BASE, data);
-	preempt_enable();
-	vmx->msr_guest_kernel_gs_base = data;
-}
-#endif
-
-static void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu)
-{
-	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
-	struct pi_desc old, new;
-	unsigned int dest;
-
-	/*
-	 * In case of hot-plug or hot-unplug, we may have to undo
-	 * vmx_vcpu_pi_put even if there is no assigned device.  And we
-	 * always keep PI.NDST up to date for simplicity: it makes the
-	 * code easier, and CPU migration is not a fast path.
-	 */
-	if (!pi_test_sn(pi_desc) && vcpu->cpu == cpu)
-		return;
-
-	/*
-	 * If the 'nv' field is POSTED_INTR_WAKEUP_VECTOR, do not change
-	 * PI.NDST: pi_post_block is the one expected to change PID.NDST and the
-	 * wakeup handler expects the vCPU to be on the blocked_vcpu_list that
-	 * matches PI.NDST. Otherwise, a vcpu may not be able to be woken up
-	 * correctly.
-	 */
-	if (pi_desc->nv == POSTED_INTR_WAKEUP_VECTOR || vcpu->cpu == cpu) {
-		pi_clear_sn(pi_desc);
-		goto after_clear_sn;
-	}
-
-	/* The full case.  */
-	do {
-		old.control = new.control = pi_desc->control;
-
-		dest = cpu_physical_id(cpu);
-
-		if (x2apic_enabled())
-			new.ndst = dest;
-		else
-			new.ndst = (dest << 8) & 0xFF00;
-
-		new.sn = 0;
-	} while (cmpxchg64(&pi_desc->control, old.control,
-			   new.control) != old.control);
-
-after_clear_sn:
-
-	/*
-	 * Clear SN before reading the bitmap.  The VT-d firmware
-	 * writes the bitmap and reads SN atomically (5.2.3 in the
-	 * spec), so it doesn't really have a memory barrier that
-	 * pairs with this, but we cannot do that and we need one.
-	 */
-	smp_mb__after_atomic();
-
-	if (!pi_is_pir_empty(pi_desc))
-		pi_set_on(pi_desc);
-}
-
-void vmx_vcpu_load_vmcs(struct kvm_vcpu *vcpu, int cpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	bool already_loaded = vmx->loaded_vmcs->cpu == cpu;
-
-	if (!already_loaded) {
-		loaded_vmcs_clear(vmx->loaded_vmcs);
-		local_irq_disable();
-		crash_disable_local_vmclear(cpu);
-
-		/*
-		 * Read loaded_vmcs->cpu should be before fetching
-		 * loaded_vmcs->loaded_vmcss_on_cpu_link.
-		 * See the comments in __loaded_vmcs_clear().
-		 */
-		smp_rmb();
-
-		list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link,
-			 &per_cpu(loaded_vmcss_on_cpu, cpu));
-		crash_enable_local_vmclear(cpu);
-		local_irq_enable();
-	}
-
-	if (per_cpu(current_vmcs, cpu) != vmx->loaded_vmcs->vmcs) {
-		per_cpu(current_vmcs, cpu) = vmx->loaded_vmcs->vmcs;
-		vmcs_load(vmx->loaded_vmcs->vmcs);
-		indirect_branch_prediction_barrier();
-	}
-
-	if (!already_loaded) {
-		void *gdt = get_current_gdt_ro();
-		unsigned long sysenter_esp;
-
-		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
-
-		/*
-		 * Linux uses per-cpu TSS and GDT, so set these when switching
-		 * processors.  See 22.2.4.
-		 */
-		vmcs_writel(HOST_TR_BASE,
-			    (unsigned long)&get_cpu_entry_area(cpu)->tss.x86_tss);
-		vmcs_writel(HOST_GDTR_BASE, (unsigned long)gdt);   /* 22.2.4 */
-
-		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
-		vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */
-
-		vmx->loaded_vmcs->cpu = cpu;
-	}
-
-	/* Setup TSC multiplier */
-	if (kvm_has_tsc_control &&
-	    vmx->current_tsc_ratio != vcpu->arch.tsc_scaling_ratio)
-		decache_tsc_multiplier(vmx);
-}
-
-/*
- * Switches to specified vcpu, until a matching vcpu_put(), but assumes
- * vcpu mutex is already taken.
- */
-void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-
-	vmx_vcpu_load_vmcs(vcpu, cpu);
-
-	vmx_vcpu_pi_load(vcpu, cpu);
-
-	vmx->host_pkru = read_pkru();
-	vmx->host_debugctlmsr = get_debugctlmsr();
-}
-
-static void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu)
-{
-	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
-
-	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
-		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
-		!kvm_vcpu_apicv_active(vcpu))
-		return;
-
-	/* Set SN when the vCPU is preempted */
-	if (vcpu->preempted)
-		pi_set_sn(pi_desc);
-}
-
-static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
-{
-	vmx_vcpu_pi_put(vcpu);
-
-	vmx_prepare_switch_to_host(to_vmx(vcpu));
-}
-
-static bool emulation_required(struct kvm_vcpu *vcpu)
-{
-	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
-}
-
-static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
-
-unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long rflags, save_rflags;
-
-	if (!kvm_register_is_available(vcpu, VCPU_EXREG_RFLAGS)) {
-		kvm_register_mark_available(vcpu, VCPU_EXREG_RFLAGS);
-		rflags = vmcs_readl(GUEST_RFLAGS);
-		if (vmx->rmode.vm86_active) {
-			rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
-			save_rflags = vmx->rmode.save_rflags;
-			rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
-		}
-		vmx->rflags = rflags;
-	}
-	return vmx->rflags;
-}
-
-void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long old_rflags;
-
-	if (enable_unrestricted_guest) {
-		kvm_register_mark_available(vcpu, VCPU_EXREG_RFLAGS);
-		vmx->rflags = rflags;
-		vmcs_writel(GUEST_RFLAGS, rflags);
-		return;
-	}
-
-	old_rflags = vmx_get_rflags(vcpu);
-	vmx->rflags = rflags;
-	if (vmx->rmode.vm86_active) {
-		vmx->rmode.save_rflags = rflags;
-		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
-	}
-	vmcs_writel(GUEST_RFLAGS, rflags);
-
-	if ((old_rflags ^ vmx->rflags) & X86_EFLAGS_VM)
-		vmx->emulation_required = emulation_required(vcpu);
-}
-
-u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu)
-{
-	u32 interruptibility = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
-	int ret = 0;
-
-	if (interruptibility & GUEST_INTR_STATE_STI)
-		ret |= KVM_X86_SHADOW_INT_STI;
-	if (interruptibility & GUEST_INTR_STATE_MOV_SS)
-		ret |= KVM_X86_SHADOW_INT_MOV_SS;
-
-	return ret;
-}
-
-void vmx_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
-{
-	u32 interruptibility_old = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
-	u32 interruptibility = interruptibility_old;
-
-	interruptibility &= ~(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS);
-
-	if (mask & KVM_X86_SHADOW_INT_MOV_SS)
-		interruptibility |= GUEST_INTR_STATE_MOV_SS;
-	else if (mask & KVM_X86_SHADOW_INT_STI)
-		interruptibility |= GUEST_INTR_STATE_STI;
-
-	if ((interruptibility != interruptibility_old))
-		vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, interruptibility);
-}
-
-static int vmx_rtit_ctl_check(struct kvm_vcpu *vcpu, u64 data)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long value;
-
-	/*
-	 * Any MSR write that attempts to change bits marked reserved will
-	 * case a #GP fault.
-	 */
-	if (data & vmx->pt_desc.ctl_bitmask)
-		return 1;
-
-	/*
-	 * Any attempt to modify IA32_RTIT_CTL while TraceEn is set will
-	 * result in a #GP unless the same write also clears TraceEn.
-	 */
-	if ((vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) &&
-		((vmx->pt_desc.guest.ctl ^ data) & ~RTIT_CTL_TRACEEN))
-		return 1;
-
-	/*
-	 * WRMSR to IA32_RTIT_CTL that sets TraceEn but clears this bit
-	 * and FabricEn would cause #GP, if
-	 * CPUID.(EAX=14H, ECX=0):ECX.SNGLRGNOUT[bit 2] = 0
-	 */
-	if ((data & RTIT_CTL_TRACEEN) && !(data & RTIT_CTL_TOPA) &&
-		!(data & RTIT_CTL_FABRIC_EN) &&
-		!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output))
-		return 1;
-
-	/*
-	 * MTCFreq, CycThresh and PSBFreq encodings check, any MSR write that
-	 * utilize encodings marked reserved will casue a #GP fault.
-	 */
-	value = intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_mtc_periods);
-	if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_mtc) &&
-			!test_bit((data & RTIT_CTL_MTC_RANGE) >>
-			RTIT_CTL_MTC_RANGE_OFFSET, &value))
-		return 1;
-	value = intel_pt_validate_cap(vmx->pt_desc.caps,
-						PT_CAP_cycle_thresholds);
-	if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_cyc) &&
-			!test_bit((data & RTIT_CTL_CYC_THRESH) >>
-			RTIT_CTL_CYC_THRESH_OFFSET, &value))
-		return 1;
-	value = intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_periods);
-	if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_cyc) &&
-			!test_bit((data & RTIT_CTL_PSB_FREQ) >>
-			RTIT_CTL_PSB_FREQ_OFFSET, &value))
-		return 1;
-
-	/*
-	 * If ADDRx_CFG is reserved or the encodings is >2 will
-	 * cause a #GP fault.
-	 */
-	value = (data & RTIT_CTL_ADDR0) >> RTIT_CTL_ADDR0_OFFSET;
-	if ((value && (vmx->pt_desc.addr_range < 1)) || (value > 2))
-		return 1;
-	value = (data & RTIT_CTL_ADDR1) >> RTIT_CTL_ADDR1_OFFSET;
-	if ((value && (vmx->pt_desc.addr_range < 2)) || (value > 2))
-		return 1;
-	value = (data & RTIT_CTL_ADDR2) >> RTIT_CTL_ADDR2_OFFSET;
-	if ((value && (vmx->pt_desc.addr_range < 3)) || (value > 2))
-		return 1;
-	value = (data & RTIT_CTL_ADDR3) >> RTIT_CTL_ADDR3_OFFSET;
-	if ((value && (vmx->pt_desc.addr_range < 4)) || (value > 2))
-		return 1;
-
-	return 0;
-}
-
-static int skip_emulated_instruction(struct kvm_vcpu *vcpu)
-{
-	unsigned long rip;
-
-	/*
-	 * Using VMCS.VM_EXIT_INSTRUCTION_LEN on EPT misconfig depends on
-	 * undefined behavior: Intel's SDM doesn't mandate the VMCS field be
-	 * set when EPT misconfig occurs.  In practice, real hardware updates
-	 * VM_EXIT_INSTRUCTION_LEN on EPT misconfig, but other hypervisors
-	 * (namely Hyper-V) don't set it due to it being undefined behavior,
-	 * i.e. we end up advancing IP with some random value.
-	 */
-	if (!static_cpu_has(X86_FEATURE_HYPERVISOR) ||
-	    to_vmx(vcpu)->exit_reason != EXIT_REASON_EPT_MISCONFIG) {
-		rip = kvm_rip_read(vcpu);
-		rip += vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
-		kvm_rip_write(vcpu, rip);
-	} else {
-		if (!kvm_emulate_instruction(vcpu, EMULTYPE_SKIP))
-			return 0;
-	}
-
-	/* skipping an emulated instruction also counts */
-	vmx_set_interrupt_shadow(vcpu, 0);
-
-	return 1;
-}
-
-static void vmx_clear_hlt(struct kvm_vcpu *vcpu)
-{
-	/*
-	 * Ensure that we clear the HLT state in the VMCS.  We don't need to
-	 * explicitly skip the instruction because if the HLT state is set,
-	 * then the instruction is already executing and RIP has already been
-	 * advanced.
-	 */
-	if (kvm_hlt_in_guest(vcpu->kvm) &&
-			vmcs_read32(GUEST_ACTIVITY_STATE) == GUEST_ACTIVITY_HLT)
-		vmcs_write32(GUEST_ACTIVITY_STATE, GUEST_ACTIVITY_ACTIVE);
-}
-
-static void vmx_queue_exception(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned nr = vcpu->arch.exception.nr;
-	bool has_error_code = vcpu->arch.exception.has_error_code;
-	u32 error_code = vcpu->arch.exception.error_code;
-	u32 intr_info = nr | INTR_INFO_VALID_MASK;
-
-	kvm_deliver_exception_payload(vcpu);
-
-	if (has_error_code) {
-		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
-		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
-	}
-
-	if (vmx->rmode.vm86_active) {
-		int inc_eip = 0;
-		if (kvm_exception_is_soft(nr))
-			inc_eip = vcpu->arch.event_exit_inst_len;
-		kvm_inject_realmode_interrupt(vcpu, nr, inc_eip);
-		return;
-	}
-
-	WARN_ON_ONCE(vmx->emulation_required);
-
-	if (kvm_exception_is_soft(nr)) {
-		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
-			     vmx->vcpu.arch.event_exit_inst_len);
-		intr_info |= INTR_TYPE_SOFT_EXCEPTION;
-	} else
-		intr_info |= INTR_TYPE_HARD_EXCEPTION;
-
-	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
-
-	vmx_clear_hlt(vcpu);
-}
-
-static bool vmx_rdtscp_supported(void)
-{
-	return cpu_has_vmx_rdtscp();
-}
-
-static bool vmx_invpcid_supported(void)
-{
-	return cpu_has_vmx_invpcid();
-}
-
-/*
- * Swap MSR entry in host/guest MSR entry array.
- */
-static void move_msr_up(struct vcpu_vmx *vmx, int from, int to)
-{
-	struct shared_msr_entry tmp;
-
-	tmp = vmx->guest_msrs[to];
-	vmx->guest_msrs[to] = vmx->guest_msrs[from];
-	vmx->guest_msrs[from] = tmp;
-}
-
-/*
- * Set up the vmcs to automatically save and restore system
- * msrs.  Don't touch the 64-bit msrs if the guest is in legacy
- * mode, as fiddling with msrs is very expensive.
- */
-static void setup_msrs(struct vcpu_vmx *vmx)
-{
-	int save_nmsrs, index;
-
-	save_nmsrs = 0;
-#ifdef CONFIG_X86_64
-	/*
-	 * The SYSCALL MSRs are only needed on long mode guests, and only
-	 * when EFER.SCE is set.
-	 */
-	if (is_long_mode(&vmx->vcpu) && (vmx->vcpu.arch.efer & EFER_SCE)) {
-		index = __find_msr_index(vmx, MSR_STAR);
-		if (index >= 0)
-			move_msr_up(vmx, index, save_nmsrs++);
-		index = __find_msr_index(vmx, MSR_LSTAR);
-		if (index >= 0)
-			move_msr_up(vmx, index, save_nmsrs++);
-		index = __find_msr_index(vmx, MSR_SYSCALL_MASK);
-		if (index >= 0)
-			move_msr_up(vmx, index, save_nmsrs++);
-	}
-#endif
-	index = __find_msr_index(vmx, MSR_EFER);
-	if (index >= 0 && update_transition_efer(vmx, index))
-		move_msr_up(vmx, index, save_nmsrs++);
-	index = __find_msr_index(vmx, MSR_TSC_AUX);
-	if (index >= 0 && guest_cpuid_has(&vmx->vcpu, X86_FEATURE_RDTSCP))
-		move_msr_up(vmx, index, save_nmsrs++);
-	index = __find_msr_index(vmx, MSR_IA32_TSX_CTRL);
-	if (index >= 0)
-		move_msr_up(vmx, index, save_nmsrs++);
-
-	vmx->save_nmsrs = save_nmsrs;
-	vmx->guest_msrs_ready = false;
-
-	if (cpu_has_vmx_msr_bitmap())
-		vmx_update_msr_bitmap(&vmx->vcpu);
-}
-
-static u64 vmx_read_l1_tsc_offset(struct kvm_vcpu *vcpu)
-{
-	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
-
-	if (is_guest_mode(vcpu) &&
-	    (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING))
-		return vcpu->arch.tsc_offset - vmcs12->tsc_offset;
-
-	return vcpu->arch.tsc_offset;
-}
-
-static u64 vmx_write_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
-{
-	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
-	u64 g_tsc_offset = 0;
-
-	/*
-	 * We're here if L1 chose not to trap WRMSR to TSC. According
-	 * to the spec, this should set L1's TSC; The offset that L1
-	 * set for L2 remains unchanged, and still needs to be added
-	 * to the newly set TSC to get L2's TSC.
-	 */
-	if (is_guest_mode(vcpu) &&
-	    (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING))
-		g_tsc_offset = vmcs12->tsc_offset;
-
-	trace_kvm_write_tsc_offset(vcpu->vcpu_id,
-				   vcpu->arch.tsc_offset - g_tsc_offset,
-				   offset);
-	vmcs_write64(TSC_OFFSET, offset + g_tsc_offset);
-	return offset + g_tsc_offset;
-}
-
-/*
- * nested_vmx_allowed() checks whether a guest should be allowed to use VMX
- * instructions and MSRs (i.e., nested VMX). Nested VMX is disabled for
- * all guests if the "nested" module option is off, and can also be disabled
- * for a single guest by disabling its VMX cpuid bit.
- */
-bool nested_vmx_allowed(struct kvm_vcpu *vcpu)
-{
-	return nested && guest_cpuid_has(vcpu, X86_FEATURE_VMX);
-}
-
-static inline bool vmx_feature_control_msr_valid(struct kvm_vcpu *vcpu,
-						 uint64_t val)
-{
-	uint64_t valid_bits = to_vmx(vcpu)->msr_ia32_feature_control_valid_bits;
-
-	return !(val & ~valid_bits);
-}
-
-static int vmx_get_msr_feature(struct kvm_msr_entry *msr)
-{
-	switch (msr->index) {
-	case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC:
-		if (!nested)
-			return 1;
-		return vmx_get_vmx_msr(&vmcs_config.nested, msr->index, &msr->data);
-	default:
-		return 1;
-	}
-}
-
-/*
- * Reads an msr value (of 'msr_index') into 'pdata'.
- * Returns 0 on success, non-0 otherwise.
- * Assumes vcpu_load() was already called.
- */
-static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct shared_msr_entry *msr;
-	u32 index;
-
-	switch (msr_info->index) {
-#ifdef CONFIG_X86_64
-	case MSR_FS_BASE:
-		msr_info->data = vmcs_readl(GUEST_FS_BASE);
-		break;
-	case MSR_GS_BASE:
-		msr_info->data = vmcs_readl(GUEST_GS_BASE);
-		break;
-	case MSR_KERNEL_GS_BASE:
-		msr_info->data = vmx_read_guest_kernel_gs_base(vmx);
-		break;
-#endif
-	case MSR_EFER:
-		return kvm_get_msr_common(vcpu, msr_info);
-	case MSR_IA32_TSX_CTRL:
-		if (!msr_info->host_initiated &&
-		    !(vcpu->arch.arch_capabilities & ARCH_CAP_TSX_CTRL_MSR))
-			return 1;
-		goto find_shared_msr;
-	case MSR_IA32_UMWAIT_CONTROL:
-		if (!msr_info->host_initiated && !vmx_has_waitpkg(vmx))
-			return 1;
-
-		msr_info->data = vmx->msr_ia32_umwait_control;
-		break;
-	case MSR_IA32_SPEC_CTRL:
-		if (!msr_info->host_initiated &&
-		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
-			return 1;
-
-		msr_info->data = to_vmx(vcpu)->spec_ctrl;
-		break;
-	case MSR_IA32_SYSENTER_CS:
-		msr_info->data = vmcs_read32(GUEST_SYSENTER_CS);
-		break;
-	case MSR_IA32_SYSENTER_EIP:
-		msr_info->data = vmcs_readl(GUEST_SYSENTER_EIP);
-		break;
-	case MSR_IA32_SYSENTER_ESP:
-		msr_info->data = vmcs_readl(GUEST_SYSENTER_ESP);
-		break;
-	case MSR_IA32_BNDCFGS:
-		if (!kvm_mpx_supported() ||
-		    (!msr_info->host_initiated &&
-		     !guest_cpuid_has(vcpu, X86_FEATURE_MPX)))
-			return 1;
-		msr_info->data = vmcs_read64(GUEST_BNDCFGS);
-		break;
-	case MSR_IA32_MCG_EXT_CTL:
-		if (!msr_info->host_initiated &&
-		    !(vmx->msr_ia32_feature_control &
-		      FEATURE_CONTROL_LMCE))
-			return 1;
-		msr_info->data = vcpu->arch.mcg_ext_ctl;
-		break;
-	case MSR_IA32_FEATURE_CONTROL:
-		msr_info->data = vmx->msr_ia32_feature_control;
-		break;
-	case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC:
-		if (!nested_vmx_allowed(vcpu))
-			return 1;
-		return vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index,
-				       &msr_info->data);
-	case MSR_IA32_RTIT_CTL:
-		if (pt_mode != PT_MODE_HOST_GUEST)
-			return 1;
-		msr_info->data = vmx->pt_desc.guest.ctl;
-		break;
-	case MSR_IA32_RTIT_STATUS:
-		if (pt_mode != PT_MODE_HOST_GUEST)
-			return 1;
-		msr_info->data = vmx->pt_desc.guest.status;
-		break;
-	case MSR_IA32_RTIT_CR3_MATCH:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			!intel_pt_validate_cap(vmx->pt_desc.caps,
-						PT_CAP_cr3_filtering))
-			return 1;
-		msr_info->data = vmx->pt_desc.guest.cr3_match;
-		break;
-	case MSR_IA32_RTIT_OUTPUT_BASE:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_topa_output) &&
-			 !intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output)))
-			return 1;
-		msr_info->data = vmx->pt_desc.guest.output_base;
-		break;
-	case MSR_IA32_RTIT_OUTPUT_MASK:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_topa_output) &&
-			 !intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output)))
-			return 1;
-		msr_info->data = vmx->pt_desc.guest.output_mask;
-		break;
-	case MSR_IA32_RTIT_ADDR0_A ... MSR_IA32_RTIT_ADDR3_B:
-		index = msr_info->index - MSR_IA32_RTIT_ADDR0_A;
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(index >= 2 * intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_num_address_ranges)))
-			return 1;
-		if (is_noncanonical_address(data, vcpu))
-			return 1;
-		if (index % 2)
-			msr_info->data = vmx->pt_desc.guest.addr_b[index / 2];
-		else
-			msr_info->data = vmx->pt_desc.guest.addr_a[index / 2];
-		break;
-	case MSR_TSC_AUX:
-		if (!msr_info->host_initiated &&
-		    !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
-			return 1;
-		goto find_shared_msr;
-	default:
-	find_shared_msr:
-		msr = find_msr_entry(vmx, msr_info->index);
-		if (msr) {
-			msr_info->data = msr->data;
-			break;
-		}
-		return kvm_get_msr_common(vcpu, msr_info);
-	}
-
-	return 0;
-}
-
-/*
- * Writes msr value into the appropriate "register".
- * Returns 0 on success, non-0 otherwise.
- * Assumes vcpu_load() was already called.
- */
-static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct shared_msr_entry *msr;
-	int ret = 0;
-	u32 msr_index = msr_info->index;
-	u64 data = msr_info->data;
-	u32 index;
-
-	switch (msr_index) {
-	case MSR_EFER:
-		ret = kvm_set_msr_common(vcpu, msr_info);
-		break;
-#ifdef CONFIG_X86_64
-	case MSR_FS_BASE:
-		vmx_segment_cache_clear(vmx);
-		vmcs_writel(GUEST_FS_BASE, data);
-		break;
-	case MSR_GS_BASE:
-		vmx_segment_cache_clear(vmx);
-		vmcs_writel(GUEST_GS_BASE, data);
-		break;
-	case MSR_KERNEL_GS_BASE:
-		vmx_write_guest_kernel_gs_base(vmx, data);
-		break;
-#endif
-	case MSR_IA32_SYSENTER_CS:
-		if (is_guest_mode(vcpu))
-			get_vmcs12(vcpu)->guest_sysenter_cs = data;
-		vmcs_write32(GUEST_SYSENTER_CS, data);
-		break;
-	case MSR_IA32_SYSENTER_EIP:
-		if (is_guest_mode(vcpu))
-			get_vmcs12(vcpu)->guest_sysenter_eip = data;
-		vmcs_writel(GUEST_SYSENTER_EIP, data);
-		break;
-	case MSR_IA32_SYSENTER_ESP:
-		if (is_guest_mode(vcpu))
-			get_vmcs12(vcpu)->guest_sysenter_esp = data;
-		vmcs_writel(GUEST_SYSENTER_ESP, data);
-		break;
-	case MSR_IA32_DEBUGCTLMSR:
-		if (is_guest_mode(vcpu) && get_vmcs12(vcpu)->vm_exit_controls &
-						VM_EXIT_SAVE_DEBUG_CONTROLS)
-			get_vmcs12(vcpu)->guest_ia32_debugctl = data;
-
-		ret = kvm_set_msr_common(vcpu, msr_info);
-		break;
-
-	case MSR_IA32_BNDCFGS:
-		if (!kvm_mpx_supported() ||
-		    (!msr_info->host_initiated &&
-		     !guest_cpuid_has(vcpu, X86_FEATURE_MPX)))
-			return 1;
-		if (is_noncanonical_address(data & PAGE_MASK, vcpu) ||
-		    (data & MSR_IA32_BNDCFGS_RSVD))
-			return 1;
-		vmcs_write64(GUEST_BNDCFGS, data);
-		break;
-	case MSR_IA32_UMWAIT_CONTROL:
-		if (!msr_info->host_initiated && !vmx_has_waitpkg(vmx))
-			return 1;
-
-		/* The reserved bit 1 and non-32 bit [63:32] should be zero */
-		if (data & (BIT_ULL(1) | GENMASK_ULL(63, 32)))
-			return 1;
-
-		vmx->msr_ia32_umwait_control = data;
-		break;
-	case MSR_IA32_SPEC_CTRL:
-		if (!msr_info->host_initiated &&
-		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
-			return 1;
-
-		/* The STIBP bit doesn't fault even if it's not advertised */
-		if (data & ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD))
-			return 1;
-
-		vmx->spec_ctrl = data;
-
-		if (!data)
-			break;
-
-		/*
-		 * For non-nested:
-		 * When it's written (to non-zero) for the first time, pass
-		 * it through.
-		 *
-		 * For nested:
-		 * The handling of the MSR bitmap for L2 guests is done in
-		 * nested_vmx_prepare_msr_bitmap. We should not touch the
-		 * vmcs02.msr_bitmap here since it gets completely overwritten
-		 * in the merging. We update the vmcs01 here for L1 as well
-		 * since it will end up touching the MSR anyway now.
-		 */
-		vmx_disable_intercept_for_msr(vmx->vmcs01.msr_bitmap,
-					      MSR_IA32_SPEC_CTRL,
-					      MSR_TYPE_RW);
-		break;
-	case MSR_IA32_TSX_CTRL:
-		if (!msr_info->host_initiated &&
-		    !(vcpu->arch.arch_capabilities & ARCH_CAP_TSX_CTRL_MSR))
-			return 1;
-		if (data & ~(TSX_CTRL_RTM_DISABLE | TSX_CTRL_CPUID_CLEAR))
-			return 1;
-		goto find_shared_msr;
-	case MSR_IA32_PRED_CMD:
-		if (!msr_info->host_initiated &&
-		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
-			return 1;
-
-		if (data & ~PRED_CMD_IBPB)
-			return 1;
-
-		if (!data)
-			break;
-
-		wrmsrl(MSR_IA32_PRED_CMD, PRED_CMD_IBPB);
-
-		/*
-		 * For non-nested:
-		 * When it's written (to non-zero) for the first time, pass
-		 * it through.
-		 *
-		 * For nested:
-		 * The handling of the MSR bitmap for L2 guests is done in
-		 * nested_vmx_prepare_msr_bitmap. We should not touch the
-		 * vmcs02.msr_bitmap here since it gets completely overwritten
-		 * in the merging.
-		 */
-		vmx_disable_intercept_for_msr(vmx->vmcs01.msr_bitmap, MSR_IA32_PRED_CMD,
-					      MSR_TYPE_W);
-		break;
-	case MSR_IA32_CR_PAT:
-		if (!kvm_pat_valid(data))
-			return 1;
-
-		if (is_guest_mode(vcpu) &&
-		    get_vmcs12(vcpu)->vm_exit_controls & VM_EXIT_SAVE_IA32_PAT)
-			get_vmcs12(vcpu)->guest_ia32_pat = data;
-
-		if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
-			vmcs_write64(GUEST_IA32_PAT, data);
-			vcpu->arch.pat = data;
-			break;
-		}
-		ret = kvm_set_msr_common(vcpu, msr_info);
-		break;
-	case MSR_IA32_TSC_ADJUST:
-		ret = kvm_set_msr_common(vcpu, msr_info);
-		break;
-	case MSR_IA32_MCG_EXT_CTL:
-		if ((!msr_info->host_initiated &&
-		     !(to_vmx(vcpu)->msr_ia32_feature_control &
-		       FEATURE_CONTROL_LMCE)) ||
-		    (data & ~MCG_EXT_CTL_LMCE_EN))
-			return 1;
-		vcpu->arch.mcg_ext_ctl = data;
-		break;
-	case MSR_IA32_FEATURE_CONTROL:
-		if (!vmx_feature_control_msr_valid(vcpu, data) ||
-		    (to_vmx(vcpu)->msr_ia32_feature_control &
-		     FEATURE_CONTROL_LOCKED && !msr_info->host_initiated))
-			return 1;
-		vmx->msr_ia32_feature_control = data;
-		if (msr_info->host_initiated && data == 0)
-			vmx_leave_nested(vcpu);
-		break;
-	case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC:
-		if (!msr_info->host_initiated)
-			return 1; /* they are read-only */
-		if (!nested_vmx_allowed(vcpu))
-			return 1;
-		return vmx_set_vmx_msr(vcpu, msr_index, data);
-	case MSR_IA32_RTIT_CTL:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			vmx_rtit_ctl_check(vcpu, data) ||
-			vmx->nested.vmxon)
-			return 1;
-		vmcs_write64(GUEST_IA32_RTIT_CTL, data);
-		vmx->pt_desc.guest.ctl = data;
-		pt_update_intercept_for_msr(vmx);
-		break;
-	case MSR_IA32_RTIT_STATUS:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(data & MSR_IA32_RTIT_STATUS_MASK))
-			return 1;
-		vmx->pt_desc.guest.status = data;
-		break;
-	case MSR_IA32_RTIT_CR3_MATCH:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			!intel_pt_validate_cap(vmx->pt_desc.caps,
-						PT_CAP_cr3_filtering))
-			return 1;
-		vmx->pt_desc.guest.cr3_match = data;
-		break;
-	case MSR_IA32_RTIT_OUTPUT_BASE:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_topa_output) &&
-			 !intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output)) ||
-			(data & MSR_IA32_RTIT_OUTPUT_BASE_MASK))
-			return 1;
-		vmx->pt_desc.guest.output_base = data;
-		break;
-	case MSR_IA32_RTIT_OUTPUT_MASK:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_topa_output) &&
-			 !intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output)))
-			return 1;
-		vmx->pt_desc.guest.output_mask = data;
-		break;
-	case MSR_IA32_RTIT_ADDR0_A ... MSR_IA32_RTIT_ADDR3_B:
-		index = msr_info->index - MSR_IA32_RTIT_ADDR0_A;
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(index >= 2 * intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_num_address_ranges)))
-			return 1;
-		if (is_noncanonical_address(data, vcpu))
-			return 1;
-		if (index % 2)
-			vmx->pt_desc.guest.addr_b[index / 2] = data;
-		else
-			vmx->pt_desc.guest.addr_a[index / 2] = data;
-		break;
-	case MSR_TSC_AUX:
-		if (!msr_info->host_initiated &&
-		    !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
-			return 1;
-		/* Check reserved bit, higher 32 bits should be zero */
-		if ((data >> 32) != 0)
-			return 1;
-		goto find_shared_msr;
-
-	default:
-	find_shared_msr:
-		msr = find_msr_entry(vmx, msr_index);
-		if (msr)
-			ret = vmx_set_guest_msr(vmx, msr, data);
-		else
-			ret = kvm_set_msr_common(vcpu, msr_info);
-	}
-
-	return ret;
-}
-
-static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
-{
-	kvm_register_mark_available(vcpu, reg);
-
-	switch (reg) {
-	case VCPU_REGS_RSP:
-		vcpu->arch.regs[VCPU_REGS_RSP] = vmcs_readl(GUEST_RSP);
-		break;
-	case VCPU_REGS_RIP:
-		vcpu->arch.regs[VCPU_REGS_RIP] = vmcs_readl(GUEST_RIP);
-		break;
-	case VCPU_EXREG_PDPTR:
-		if (enable_ept)
-			ept_save_pdptrs(vcpu);
-		break;
-	case VCPU_EXREG_CR3:
-		if (enable_unrestricted_guest || (enable_ept && is_paging(vcpu)))
-			vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		break;
-	}
-}
-
-static __init int cpu_has_kvm_support(void)
-{
-	return cpu_has_vmx();
-}
-
-static __init int vmx_disabled_by_bios(void)
-{
-	u64 msr;
-
-	rdmsrl(MSR_IA32_FEATURE_CONTROL, msr);
-	if (msr & FEATURE_CONTROL_LOCKED) {
-		/* launched w/ TXT and VMX disabled */
-		if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX)
-			&& tboot_enabled())
-			return 1;
-		/* launched w/o TXT and VMX only enabled w/ TXT */
-		if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX)
-			&& (msr & FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX)
-			&& !tboot_enabled()) {
-			printk(KERN_WARNING "kvm: disable TXT in the BIOS or "
-				"activate TXT before enabling KVM\n");
-			return 1;
-		}
-		/* launched w/o TXT and VMX disabled */
-		if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX)
-			&& !tboot_enabled())
-			return 1;
-	}
-
-	return 0;
-}
-
-static void kvm_cpu_vmxon(u64 addr)
-{
-	cr4_set_bits(X86_CR4_VMXE);
-	intel_pt_handle_vmx(1);
-
-	asm volatile ("vmxon %0" : : "m"(addr));
-}
-
-static int hardware_enable(void)
-{
-	int cpu = raw_smp_processor_id();
-	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
-	u64 old, test_bits;
-
-	if (cr4_read_shadow() & X86_CR4_VMXE)
-		return -EBUSY;
-
-	/*
-	 * This can happen if we hot-added a CPU but failed to allocate
-	 * VP assist page for it.
-	 */
-	if (static_branch_unlikely(&enable_evmcs) &&
-	    !hv_get_vp_assist_page(cpu))
-		return -EFAULT;
-
-	INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
-	INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
-	spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
-
-	/*
-	 * Now we can enable the vmclear operation in kdump
-	 * since the loaded_vmcss_on_cpu list on this cpu
-	 * has been initialized.
-	 *
-	 * Though the cpu is not in VMX operation now, there
-	 * is no problem to enable the vmclear operation
-	 * for the loaded_vmcss_on_cpu list is empty!
-	 */
-	crash_enable_local_vmclear(cpu);
-
-	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
-
-	test_bits = FEATURE_CONTROL_LOCKED;
-	test_bits |= FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX;
-	if (tboot_enabled())
-		test_bits |= FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX;
-
-	if ((old & test_bits) != test_bits) {
-		/* enable and lock */
-		wrmsrl(MSR_IA32_FEATURE_CONTROL, old | test_bits);
-	}
-	kvm_cpu_vmxon(phys_addr);
-	if (enable_ept)
-		ept_sync_global();
-
-	return 0;
-}
-
-static void vmclear_local_loaded_vmcss(void)
-{
-	int cpu = raw_smp_processor_id();
-	struct loaded_vmcs *v, *n;
-
-	list_for_each_entry_safe(v, n, &per_cpu(loaded_vmcss_on_cpu, cpu),
-				 loaded_vmcss_on_cpu_link)
-		__loaded_vmcs_clear(v);
-}
-
-
-/* Just like cpu_vmxoff(), but with the __kvm_handle_fault_on_reboot()
- * tricks.
- */
-static void kvm_cpu_vmxoff(void)
-{
-	asm volatile (__ex("vmxoff"));
-
-	intel_pt_handle_vmx(0);
-	cr4_clear_bits(X86_CR4_VMXE);
-}
-
-static void hardware_disable(void)
-{
-	vmclear_local_loaded_vmcss();
-	kvm_cpu_vmxoff();
-}
-
-static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
-				      u32 msr, u32 *result)
-{
-	u32 vmx_msr_low, vmx_msr_high;
-	u32 ctl = ctl_min | ctl_opt;
-
-	rdmsr(msr, vmx_msr_low, vmx_msr_high);
-
-	ctl &= vmx_msr_high; /* bit == 0 in high word ==> must be zero */
-	ctl |= vmx_msr_low;  /* bit == 1 in low word  ==> must be one  */
-
-	/* Ensure minimum (required) set of control bits are supported. */
-	if (ctl_min & ~ctl)
-		return -EIO;
-
-	*result = ctl;
-	return 0;
-}
-
-static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
-				    struct vmx_capability *vmx_cap)
-{
-	u32 vmx_msr_low, vmx_msr_high;
-	u32 min, opt, min2, opt2;
-	u32 _pin_based_exec_control = 0;
-	u32 _cpu_based_exec_control = 0;
-	u32 _cpu_based_2nd_exec_control = 0;
-	u32 _vmexit_control = 0;
-	u32 _vmentry_control = 0;
-
-	memset(vmcs_conf, 0, sizeof(*vmcs_conf));
-	min = CPU_BASED_HLT_EXITING |
-#ifdef CONFIG_X86_64
-	      CPU_BASED_CR8_LOAD_EXITING |
-	      CPU_BASED_CR8_STORE_EXITING |
-#endif
-	      CPU_BASED_CR3_LOAD_EXITING |
-	      CPU_BASED_CR3_STORE_EXITING |
-	      CPU_BASED_UNCOND_IO_EXITING |
-	      CPU_BASED_MOV_DR_EXITING |
-	      CPU_BASED_USE_TSC_OFFSETTING |
-	      CPU_BASED_MWAIT_EXITING |
-	      CPU_BASED_MONITOR_EXITING |
-	      CPU_BASED_INVLPG_EXITING |
-	      CPU_BASED_RDPMC_EXITING;
-
-	opt = CPU_BASED_TPR_SHADOW |
-	      CPU_BASED_USE_MSR_BITMAPS |
-	      CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
-	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
-				&_cpu_based_exec_control) < 0)
-		return -EIO;
-#ifdef CONFIG_X86_64
-	if ((_cpu_based_exec_control & CPU_BASED_TPR_SHADOW))
-		_cpu_based_exec_control &= ~CPU_BASED_CR8_LOAD_EXITING &
-					   ~CPU_BASED_CR8_STORE_EXITING;
-#endif
-	if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) {
-		min2 = 0;
-		opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
-			SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
-			SECONDARY_EXEC_WBINVD_EXITING |
-			SECONDARY_EXEC_ENABLE_VPID |
-			SECONDARY_EXEC_ENABLE_EPT |
-			SECONDARY_EXEC_UNRESTRICTED_GUEST |
-			SECONDARY_EXEC_PAUSE_LOOP_EXITING |
-			SECONDARY_EXEC_DESC |
-			SECONDARY_EXEC_RDTSCP |
-			SECONDARY_EXEC_ENABLE_INVPCID |
-			SECONDARY_EXEC_APIC_REGISTER_VIRT |
-			SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
-			SECONDARY_EXEC_SHADOW_VMCS |
-			SECONDARY_EXEC_XSAVES |
-			SECONDARY_EXEC_RDSEED_EXITING |
-			SECONDARY_EXEC_RDRAND_EXITING |
-			SECONDARY_EXEC_ENABLE_PML |
-			SECONDARY_EXEC_TSC_SCALING |
-			SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
-			SECONDARY_EXEC_PT_USE_GPA |
-			SECONDARY_EXEC_PT_CONCEAL_VMX |
-			SECONDARY_EXEC_ENABLE_VMFUNC |
-			SECONDARY_EXEC_ENCLS_EXITING;
-		if (adjust_vmx_controls(min2, opt2,
-					MSR_IA32_VMX_PROCBASED_CTLS2,
-					&_cpu_based_2nd_exec_control) < 0)
-			return -EIO;
-	}
-#ifndef CONFIG_X86_64
-	if (!(_cpu_based_2nd_exec_control &
-				SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
-		_cpu_based_exec_control &= ~CPU_BASED_TPR_SHADOW;
-#endif
-
-	if (!(_cpu_based_exec_control & CPU_BASED_TPR_SHADOW))
-		_cpu_based_2nd_exec_control &= ~(
-				SECONDARY_EXEC_APIC_REGISTER_VIRT |
-				SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
-				SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY);
-
-	rdmsr_safe(MSR_IA32_VMX_EPT_VPID_CAP,
-		&vmx_cap->ept, &vmx_cap->vpid);
-
-	if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
-		/* CR3 accesses and invlpg don't need to cause VM Exits when EPT
-		   enabled */
-		_cpu_based_exec_control &= ~(CPU_BASED_CR3_LOAD_EXITING |
-					     CPU_BASED_CR3_STORE_EXITING |
-					     CPU_BASED_INVLPG_EXITING);
-	} else if (vmx_cap->ept) {
-		vmx_cap->ept = 0;
-		pr_warn_once("EPT CAP should not exist if not support "
-				"1-setting enable EPT VM-execution control\n");
-	}
-	if (!(_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_VPID) &&
-		vmx_cap->vpid) {
-		vmx_cap->vpid = 0;
-		pr_warn_once("VPID CAP should not exist if not support "
-				"1-setting enable VPID VM-execution control\n");
-	}
-
-	min = VM_EXIT_SAVE_DEBUG_CONTROLS | VM_EXIT_ACK_INTR_ON_EXIT;
-#ifdef CONFIG_X86_64
-	min |= VM_EXIT_HOST_ADDR_SPACE_SIZE;
-#endif
-	opt = VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |
-	      VM_EXIT_LOAD_IA32_PAT |
-	      VM_EXIT_LOAD_IA32_EFER |
-	      VM_EXIT_CLEAR_BNDCFGS |
-	      VM_EXIT_PT_CONCEAL_PIP |
-	      VM_EXIT_CLEAR_IA32_RTIT_CTL;
-	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_EXIT_CTLS,
-				&_vmexit_control) < 0)
-		return -EIO;
-
-	min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
-	opt = PIN_BASED_VIRTUAL_NMIS | PIN_BASED_POSTED_INTR |
-		 PIN_BASED_VMX_PREEMPTION_TIMER;
-	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
-				&_pin_based_exec_control) < 0)
-		return -EIO;
-
-	if (cpu_has_broken_vmx_preemption_timer())
-		_pin_based_exec_control &= ~PIN_BASED_VMX_PREEMPTION_TIMER;
-	if (!(_cpu_based_2nd_exec_control &
-		SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY))
-		_pin_based_exec_control &= ~PIN_BASED_POSTED_INTR;
-
-	min = VM_ENTRY_LOAD_DEBUG_CONTROLS;
-	opt = VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |
-	      VM_ENTRY_LOAD_IA32_PAT |
-	      VM_ENTRY_LOAD_IA32_EFER |
-	      VM_ENTRY_LOAD_BNDCFGS |
-	      VM_ENTRY_PT_CONCEAL_PIP |
-	      VM_ENTRY_LOAD_IA32_RTIT_CTL;
-	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_ENTRY_CTLS,
-				&_vmentry_control) < 0)
-		return -EIO;
-
-	/*
-	 * Some cpus support VM_{ENTRY,EXIT}_IA32_PERF_GLOBAL_CTRL but they
-	 * can't be used due to an errata where VM Exit may incorrectly clear
-	 * IA32_PERF_GLOBAL_CTRL[34:32].  Workaround the errata by using the
-	 * MSR load mechanism to switch IA32_PERF_GLOBAL_CTRL.
-	 */
-	if (boot_cpu_data.x86 == 0x6) {
-		switch (boot_cpu_data.x86_model) {
-		case 26: /* AAK155 */
-		case 30: /* AAP115 */
-		case 37: /* AAT100 */
-		case 44: /* BC86,AAY89,BD102 */
-		case 46: /* BA97 */
-			_vmentry_control &= ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL;
-			_vmexit_control &= ~VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL;
-			pr_warn_once("kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL "
-					"does not work properly. Using workaround\n");
-			break;
-		default:
-			break;
-		}
-	}
-
-
-	rdmsr(MSR_IA32_VMX_BASIC, vmx_msr_low, vmx_msr_high);
-
-	/* IA-32 SDM Vol 3B: VMCS size is never greater than 4kB. */
-	if ((vmx_msr_high & 0x1fff) > PAGE_SIZE)
-		return -EIO;
-
-#ifdef CONFIG_X86_64
-	/* IA-32 SDM Vol 3B: 64-bit CPUs always have VMX_BASIC_MSR[48]==0. */
-	if (vmx_msr_high & (1u<<16))
-		return -EIO;
-#endif
-
-	/* Require Write-Back (WB) memory type for VMCS accesses. */
-	if (((vmx_msr_high >> 18) & 15) != 6)
-		return -EIO;
-
-	vmcs_conf->size = vmx_msr_high & 0x1fff;
-	vmcs_conf->order = get_order(vmcs_conf->size);
-	vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff;
-
-	vmcs_conf->revision_id = vmx_msr_low;
-
-	vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control;
-	vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control;
-	vmcs_conf->cpu_based_2nd_exec_ctrl = _cpu_based_2nd_exec_control;
-	vmcs_conf->vmexit_ctrl         = _vmexit_control;
-	vmcs_conf->vmentry_ctrl        = _vmentry_control;
-
-	if (static_branch_unlikely(&enable_evmcs))
-		evmcs_sanitize_exec_ctrls(vmcs_conf);
-
-	return 0;
-}
-
-struct vmcs *alloc_vmcs_cpu(bool shadow, int cpu, gfp_t flags)
-{
-	int node = cpu_to_node(cpu);
-	struct page *pages;
-	struct vmcs *vmcs;
-
-	pages = __alloc_pages_node(node, flags, vmcs_config.order);
-	if (!pages)
-		return NULL;
-	vmcs = page_address(pages);
-	memset(vmcs, 0, vmcs_config.size);
-
-	/* KVM supports Enlightened VMCS v1 only */
-	if (static_branch_unlikely(&enable_evmcs))
-		vmcs->hdr.revision_id = KVM_EVMCS_VERSION;
-	else
-		vmcs->hdr.revision_id = vmcs_config.revision_id;
-
-	if (shadow)
-		vmcs->hdr.shadow_vmcs = 1;
-	return vmcs;
-}
-
-void free_vmcs(struct vmcs *vmcs)
-{
-	free_pages((unsigned long)vmcs, vmcs_config.order);
-}
-
-/*
- * Free a VMCS, but before that VMCLEAR it on the CPU where it was last loaded
- */
-void free_loaded_vmcs(struct loaded_vmcs *loaded_vmcs)
-{
-	if (!loaded_vmcs->vmcs)
-		return;
-	loaded_vmcs_clear(loaded_vmcs);
-	free_vmcs(loaded_vmcs->vmcs);
-	loaded_vmcs->vmcs = NULL;
-	if (loaded_vmcs->msr_bitmap)
-		free_page((unsigned long)loaded_vmcs->msr_bitmap);
-	WARN_ON(loaded_vmcs->shadow_vmcs != NULL);
-}
-
-int alloc_loaded_vmcs(struct loaded_vmcs *loaded_vmcs)
-{
-	loaded_vmcs->vmcs = alloc_vmcs(false);
-	if (!loaded_vmcs->vmcs)
-		return -ENOMEM;
-
-	loaded_vmcs->shadow_vmcs = NULL;
-	loaded_vmcs->hv_timer_soft_disabled = false;
-	loaded_vmcs_init(loaded_vmcs);
-
-	if (cpu_has_vmx_msr_bitmap()) {
-		loaded_vmcs->msr_bitmap = (unsigned long *)
-				__get_free_page(GFP_KERNEL_ACCOUNT);
-		if (!loaded_vmcs->msr_bitmap)
-			goto out_vmcs;
-		memset(loaded_vmcs->msr_bitmap, 0xff, PAGE_SIZE);
-
-		if (IS_ENABLED(CONFIG_HYPERV) &&
-		    static_branch_unlikely(&enable_evmcs) &&
-		    (ms_hyperv.nested_features & HV_X64_NESTED_MSR_BITMAP)) {
-			struct hv_enlightened_vmcs *evmcs =
-				(struct hv_enlightened_vmcs *)loaded_vmcs->vmcs;
-
-			evmcs->hv_enlightenments_control.msr_bitmap = 1;
-		}
-	}
-
-	memset(&loaded_vmcs->host_state, 0, sizeof(struct vmcs_host_state));
-	memset(&loaded_vmcs->controls_shadow, 0,
-		sizeof(struct vmcs_controls_shadow));
-
-	return 0;
-
-out_vmcs:
-	free_loaded_vmcs(loaded_vmcs);
-	return -ENOMEM;
-}
-
-static void free_kvm_area(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		free_vmcs(per_cpu(vmxarea, cpu));
-		per_cpu(vmxarea, cpu) = NULL;
-	}
-}
-
-static __init int alloc_kvm_area(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		struct vmcs *vmcs;
-
-		vmcs = alloc_vmcs_cpu(false, cpu, GFP_KERNEL);
-		if (!vmcs) {
-			free_kvm_area();
-			return -ENOMEM;
-		}
-
-		/*
-		 * When eVMCS is enabled, alloc_vmcs_cpu() sets
-		 * vmcs->revision_id to KVM_EVMCS_VERSION instead of
-		 * revision_id reported by MSR_IA32_VMX_BASIC.
-		 *
-		 * However, even though not explicitly documented by
-		 * TLFS, VMXArea passed as VMXON argument should
-		 * still be marked with revision_id reported by
-		 * physical CPU.
-		 */
-		if (static_branch_unlikely(&enable_evmcs))
-			vmcs->hdr.revision_id = vmcs_config.revision_id;
-
-		per_cpu(vmxarea, cpu) = vmcs;
-	}
-	return 0;
-}
-
-static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg,
-		struct kvm_segment *save)
-{
-	if (!emulate_invalid_guest_state) {
-		/*
-		 * CS and SS RPL should be equal during guest entry according
-		 * to VMX spec, but in reality it is not always so. Since vcpu
-		 * is in the middle of the transition from real mode to
-		 * protected mode it is safe to assume that RPL 0 is a good
-		 * default value.
-		 */
-		if (seg == VCPU_SREG_CS || seg == VCPU_SREG_SS)
-			save->selector &= ~SEGMENT_RPL_MASK;
-		save->dpl = save->selector & SEGMENT_RPL_MASK;
-		save->s = 1;
-	}
-	vmx_set_segment(vcpu, save, seg);
-}
-
-static void enter_pmode(struct kvm_vcpu *vcpu)
-{
-	unsigned long flags;
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-
-	/*
-	 * Update real mode segment cache. It may be not up-to-date if sement
-	 * register was written while vcpu was in a guest mode.
-	 */
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_ES], VCPU_SREG_ES);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_DS], VCPU_SREG_DS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_FS], VCPU_SREG_FS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_GS], VCPU_SREG_GS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_SS], VCPU_SREG_SS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_CS], VCPU_SREG_CS);
-
-	vmx->rmode.vm86_active = 0;
-
-	vmx_segment_cache_clear(vmx);
-
-	vmx_set_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
-
-	flags = vmcs_readl(GUEST_RFLAGS);
-	flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
-	flags |= vmx->rmode.save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
-	vmcs_writel(GUEST_RFLAGS, flags);
-
-	vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
-			(vmcs_readl(CR4_READ_SHADOW) & X86_CR4_VME));
-
-	update_exception_bitmap(vcpu);
-
-	fix_pmode_seg(vcpu, VCPU_SREG_CS, &vmx->rmode.segs[VCPU_SREG_CS]);
-	fix_pmode_seg(vcpu, VCPU_SREG_SS, &vmx->rmode.segs[VCPU_SREG_SS]);
-	fix_pmode_seg(vcpu, VCPU_SREG_ES, &vmx->rmode.segs[VCPU_SREG_ES]);
-	fix_pmode_seg(vcpu, VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]);
-	fix_pmode_seg(vcpu, VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]);
-	fix_pmode_seg(vcpu, VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]);
-}
-
-static void fix_rmode_seg(int seg, struct kvm_segment *save)
-{
-	const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
-	struct kvm_segment var = *save;
-
-	var.dpl = 0x3;
-	if (seg == VCPU_SREG_CS)
-		var.type = 0x3;
-
-	if (!emulate_invalid_guest_state) {
-		var.selector = var.base >> 4;
-		var.base = var.base & 0xffff0;
-		var.limit = 0xffff;
-		var.g = 0;
-		var.db = 0;
-		var.present = 1;
-		var.s = 1;
-		var.l = 0;
-		var.unusable = 0;
-		var.type = 0x3;
-		var.avl = 0;
-		if (save->base & 0xf)
-			printk_once(KERN_WARNING "kvm: segment base is not "
-					"paragraph aligned when entering "
-					"protected mode (seg=%d)", seg);
-	}
-
-	vmcs_write16(sf->selector, var.selector);
-	vmcs_writel(sf->base, var.base);
-	vmcs_write32(sf->limit, var.limit);
-	vmcs_write32(sf->ar_bytes, vmx_segment_access_rights(&var));
-}
-
-static void enter_rmode(struct kvm_vcpu *vcpu)
-{
-	unsigned long flags;
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_vmx *kvm_vmx = to_kvm_vmx(vcpu->kvm);
-
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_ES], VCPU_SREG_ES);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_DS], VCPU_SREG_DS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_FS], VCPU_SREG_FS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_GS], VCPU_SREG_GS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_SS], VCPU_SREG_SS);
-	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_CS], VCPU_SREG_CS);
-
-	vmx->rmode.vm86_active = 1;
-
-	/*
-	 * Very old userspace does not call KVM_SET_TSS_ADDR before entering
-	 * vcpu. Warn the user that an update is overdue.
-	 */
-	if (!kvm_vmx->tss_addr)
-		printk_once(KERN_WARNING "kvm: KVM_SET_TSS_ADDR need to be "
-			     "called before entering vcpu\n");
-
-	vmx_segment_cache_clear(vmx);
-
-	vmcs_writel(GUEST_TR_BASE, kvm_vmx->tss_addr);
-	vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1);
-	vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
-
-	flags = vmcs_readl(GUEST_RFLAGS);
-	vmx->rmode.save_rflags = flags;
-
-	flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
-
-	vmcs_writel(GUEST_RFLAGS, flags);
-	vmcs_writel(GUEST_CR4, vmcs_readl(GUEST_CR4) | X86_CR4_VME);
-	update_exception_bitmap(vcpu);
-
-	fix_rmode_seg(VCPU_SREG_SS, &vmx->rmode.segs[VCPU_SREG_SS]);
-	fix_rmode_seg(VCPU_SREG_CS, &vmx->rmode.segs[VCPU_SREG_CS]);
-	fix_rmode_seg(VCPU_SREG_ES, &vmx->rmode.segs[VCPU_SREG_ES]);
-	fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]);
-	fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]);
-	fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]);
-
-	kvm_mmu_reset_context(vcpu);
-}
-
-void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct shared_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
-
-	if (!msr)
-		return;
-
-	vcpu->arch.efer = efer;
-	if (efer & EFER_LMA) {
-		vm_entry_controls_setbit(to_vmx(vcpu), VM_ENTRY_IA32E_MODE);
-		msr->data = efer;
-	} else {
-		vm_entry_controls_clearbit(to_vmx(vcpu), VM_ENTRY_IA32E_MODE);
-
-		msr->data = efer & ~EFER_LME;
-	}
-	setup_msrs(vmx);
-}
-
-#ifdef CONFIG_X86_64
-
-static void enter_lmode(struct kvm_vcpu *vcpu)
-{
-	u32 guest_tr_ar;
-
-	vmx_segment_cache_clear(to_vmx(vcpu));
-
-	guest_tr_ar = vmcs_read32(GUEST_TR_AR_BYTES);
-	if ((guest_tr_ar & VMX_AR_TYPE_MASK) != VMX_AR_TYPE_BUSY_64_TSS) {
-		pr_debug_ratelimited("%s: tss fixup for long mode. \n",
-				     __func__);
-		vmcs_write32(GUEST_TR_AR_BYTES,
-			     (guest_tr_ar & ~VMX_AR_TYPE_MASK)
-			     | VMX_AR_TYPE_BUSY_64_TSS);
-	}
-	vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA);
-}
-
-static void exit_lmode(struct kvm_vcpu *vcpu)
-{
-	vm_entry_controls_clearbit(to_vmx(vcpu), VM_ENTRY_IA32E_MODE);
-	vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA);
-}
-
-#endif
-
-static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr)
-{
-	int vpid = to_vmx(vcpu)->vpid;
-
-	if (!vpid_sync_vcpu_addr(vpid, addr))
-		vpid_sync_context(vpid);
-
-	/*
-	 * If VPIDs are not supported or enabled, then the above is a no-op.
-	 * But we don't really need a TLB flush in that case anyway, because
-	 * each VM entry/exit includes an implicit flush when VPID is 0.
-	 */
-}
-
-static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
-{
-	ulong cr0_guest_owned_bits = vcpu->arch.cr0_guest_owned_bits;
-
-	vcpu->arch.cr0 &= ~cr0_guest_owned_bits;
-	vcpu->arch.cr0 |= vmcs_readl(GUEST_CR0) & cr0_guest_owned_bits;
-}
-
-static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
-{
-	ulong cr4_guest_owned_bits = vcpu->arch.cr4_guest_owned_bits;
-
-	vcpu->arch.cr4 &= ~cr4_guest_owned_bits;
-	vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & cr4_guest_owned_bits;
-}
-
-static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
-{
-	struct kvm_mmu *mmu = vcpu->arch.walk_mmu;
-
-	if (!kvm_register_is_dirty(vcpu, VCPU_EXREG_PDPTR))
-		return;
-
-	if (is_pae_paging(vcpu)) {
-		vmcs_write64(GUEST_PDPTR0, mmu->pdptrs[0]);
-		vmcs_write64(GUEST_PDPTR1, mmu->pdptrs[1]);
-		vmcs_write64(GUEST_PDPTR2, mmu->pdptrs[2]);
-		vmcs_write64(GUEST_PDPTR3, mmu->pdptrs[3]);
-	}
-}
-
-void ept_save_pdptrs(struct kvm_vcpu *vcpu)
-{
-	struct kvm_mmu *mmu = vcpu->arch.walk_mmu;
-
-	if (is_pae_paging(vcpu)) {
-		mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
-		mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
-		mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
-		mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
-	}
-
-	kvm_register_mark_dirty(vcpu, VCPU_EXREG_PDPTR);
-}
-
-static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
-					unsigned long cr0,
-					struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-
-	if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3))
-		vmx_cache_reg(vcpu, VCPU_EXREG_CR3);
-	if (!(cr0 & X86_CR0_PG)) {
-		/* From paging/starting to nonpaging */
-		exec_controls_setbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
-					  CPU_BASED_CR3_STORE_EXITING);
-		vcpu->arch.cr0 = cr0;
-		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
-	} else if (!is_paging(vcpu)) {
-		/* From nonpaging to paging */
-		exec_controls_clearbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
-					    CPU_BASED_CR3_STORE_EXITING);
-		vcpu->arch.cr0 = cr0;
-		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
-	}
-
-	if (!(cr0 & X86_CR0_WP))
-		*hw_cr0 &= ~X86_CR0_WP;
-}
-
-void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long hw_cr0;
-
-	hw_cr0 = (cr0 & ~KVM_VM_CR0_ALWAYS_OFF);
-	if (enable_unrestricted_guest)
-		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
-	else {
-		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON;
-
-		if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
-			enter_pmode(vcpu);
-
-		if (!vmx->rmode.vm86_active && !(cr0 & X86_CR0_PE))
-			enter_rmode(vcpu);
-	}
-
-#ifdef CONFIG_X86_64
-	if (vcpu->arch.efer & EFER_LME) {
-		if (!is_paging(vcpu) && (cr0 & X86_CR0_PG))
-			enter_lmode(vcpu);
-		if (is_paging(vcpu) && !(cr0 & X86_CR0_PG))
-			exit_lmode(vcpu);
-	}
-#endif
-
-	if (enable_ept && !enable_unrestricted_guest)
-		ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
-
-	vmcs_writel(CR0_READ_SHADOW, cr0);
-	vmcs_writel(GUEST_CR0, hw_cr0);
-	vcpu->arch.cr0 = cr0;
-
-	/* depends on vcpu->arch.cr0 to be set to a new value */
-	vmx->emulation_required = emulation_required(vcpu);
-}
-
-static int get_ept_level(struct kvm_vcpu *vcpu)
-{
-	if (cpu_has_vmx_ept_5levels() && (cpuid_maxphyaddr(vcpu) > 48))
-		return 5;
-	return 4;
-}
-
-u64 construct_eptp(struct kvm_vcpu *vcpu, unsigned long root_hpa)
-{
-	u64 eptp = VMX_EPTP_MT_WB;
-
-	eptp |= (get_ept_level(vcpu) == 5) ? VMX_EPTP_PWL_5 : VMX_EPTP_PWL_4;
-
-	if (enable_ept_ad_bits &&
-	    (!is_guest_mode(vcpu) || nested_ept_ad_enabled(vcpu)))
-		eptp |= VMX_EPTP_AD_ENABLE_BIT;
-	eptp |= (root_hpa & PAGE_MASK);
-
-	return eptp;
-}
-
-void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
-{
-	struct kvm *kvm = vcpu->kvm;
-	bool update_guest_cr3 = true;
-	unsigned long guest_cr3;
-	u64 eptp;
-
-	guest_cr3 = cr3;
-	if (enable_ept) {
-		eptp = construct_eptp(vcpu, cr3);
-		vmcs_write64(EPT_POINTER, eptp);
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.20.1

Part of the diff is not shown here. View the raw message.

author maintainer
#9 lore raw

PATCH 9/191 KVM: nVMX: Use correct root level for nested EPT shadow page tables

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

[ Upstream commit 148d735eb55d32848c3379e460ce365f2c1cbe4b ]

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables.

Fixes 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
---
 arch/x86/kvm/vmx.c | 3 +++
 1 file changed, 3 insertions(+)
arch/x86/kvm/vmx.c +3 -0
index 2660c01eadaeb..aead984d89ad6 100644
@@ -5302,6 +5302,9 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 static int get_ept_level(struct kvm_vcpu *vcpu)
 {
+	/* Nested EPT currently only supports 4-level walks. */
+	if (is_guest_mode(vcpu) && nested_cpu_has_ept(get_vmcs12(vcpu)))
+		return 4;
 	if (cpu_has_vmx_ept_5levels() && (cpuid_maxphyaddr(vcpu) > 48))
 		return 5;
 	return 4;
Signature · 1 line
2.20.1
#10 lore raw

Re: [PATCH 4.19 009/191] KVM: nVMX: Use correct root level for nested EPT shadow page tables

Hi!

Quoted 5 lines

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables.

I don't get it. 7/191 reverts the patch, then 9/191 reverts the revert. Can we simply drop both 7 and 9, for exactly the same result?

(Patch 8 is a unused file, so it does not change the picture).

Best regards,
Pavel

Quoted 15 lines

+++ b/arch/x86/kvm/vmx.c

arch/x86/kvm/vmx.c +3 -0
@@ -5302,6 +5302,9 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 static int get_ept_level(struct kvm_vcpu *vcpu)
 {
+	/* Nested EPT currently only supports 4-level walks. */
+	if (is_guest_mode(vcpu) && nested_cpu_has_ept(get_vmcs12(vcpu)))
+		return 4;
 	if (cpu_has_vmx_ept_5levels() && (cpuid_maxphyaddr(vcpu) > 48))
 		return 5;
 	return 4;
Signature · 1 line
2.20.1
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#11 lore raw

Re: [PATCH 4.19 009/191] KVM: nVMX: Use correct root level for nested EPT shadow page tables

Quoted 8 lines · Pavel Machek

Hi!

Quoted 5 lines

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables.

Quoted 4 lines

I don't get it. 7/191 reverts the patch, then 9/191 reverts the revert. Can we simply drop both 7 and 9, for exactly the same result?

(Patch 8 is a unused file, so it does not change the picture).

Patch 07 is reverting this patch from the same unused file, arch/x86/kvm/vmx/vmx.c[*]. The reason patch 07 looks like a normal diff is that a prior patch in 4.19.105 created the unused file (which is what's reverted by patch 08 here).

Patch 09 reintroduces the fix for the correct file, arch/x86/kvm/vmx.c.

[*] In upstream, vmx.c now lives in arch/x86/kvm/vmx/, but in 4.19 and
earlier it lives in arch/x86/kvm/.

Quoted 23 lines

Best regards,
Pavel

Quoted 15 lines

+++ b/arch/x86/kvm/vmx.c

arch/x86/kvm/vmx.c +3 -0
@@ -5302,6 +5302,9 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 static int get_ept_level(struct kvm_vcpu *vcpu)
 {
+	/* Nested EPT currently only supports 4-level walks. */
+	if (is_guest_mode(vcpu) && nested_cpu_has_ept(get_vmcs12(vcpu)))
+		return 4;
 	if (cpu_has_vmx_ept_5levels() && (cpuid_maxphyaddr(vcpu) > 48))
 		return 5;
 	return 4;
Signature · 1 line
2.20.1
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#12 lore raw

Re: [PATCH 4.19 009/191] KVM: nVMX: Use correct root level for nested EPT shadow page tables

Hi!

Quoted 9 lines
Quoted 9 lines
Quoted 5 lines

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables.

I don't get it. 7/191 reverts the patch, then 9/191 reverts the revert. Can we simply drop both 7 and 9, for exactly the same result?

Quoted 8 lines
Quoted 1 line

(Patch 8 is a unused file, so it does not change the picture).

Patch 07 is reverting this patch from the same unused file, arch/x86/kvm/vmx/vmx.c[*]. The reason patch 07 looks like a normal diff is that a prior patch in 4.19.105 created the unused file (which is what's reverted by patch 08 here).

Patch 09 reintroduces the fix for the correct file, arch/x86/kvm/vmx.c.

Aha, thanks, I checked content few times but missed difference in filename. Now it makes sense.

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
author maintainer
#13 lore raw

PATCH 10/191 drm/gma500: Fixup fbdev stolen size usage evaluation

In reply to Greg Kroah-Hartman

From: Paul Kocialkowski <[email protected]>

[ Upstream commit fd1a5e521c3c083bb43ea731aae0f8b95f12b9bd ]

psbfb_probe performs an evaluation of the required size from the stolen GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb dimensions.

When two connectors are connected with different modes, the smallest will be stored in the fb dimensions, but the size that needs to be allocated must match the largest (surface) dimensions. This is what is used in the actual allocation code.

Fix this by correcting the evaluation to conform to the two points above. It allows correctly switching to 16bpp when one connector is e.g. 1920x1080 and the other is 1024x768.

---
 drivers/gpu/drm/gma500/framebuffer.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/gpu/drm/gma500/framebuffer.c +6 -2
index adefae58b5fcd..b4035ef72af8a 100644
@@ -480,6 +480,7 @@ static int psbfb_probe(struct drm_fb_helper *helper,
 		container_of(helper, struct psb_fbdev, psb_fb_helper);
 	struct drm_device *dev = psb_fbdev->psb_fb_helper.dev;
 	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned int fb_size;
 	int bytespp;
 
 	bytespp = sizes->surface_bpp / 8;
@@ -489,8 +490,11 @@ static int psbfb_probe(struct drm_fb_helper *helper,
 	/* If the mode will not fit in 32bit then switch to 16bit to get
 	   a console on full resolution. The X mode setting server will
 	   allocate its own 32bit GEM framebuffer */
-	if (ALIGN(sizes->fb_width * bytespp, 64) * sizes->fb_height >
-	                dev_priv->vram_stolen_size) {
+	fb_size = ALIGN(sizes->surface_width * bytespp, 64) *
+		  sizes->surface_height;
+	fb_size = ALIGN(fb_size, PAGE_SIZE);
+
+	if (fb_size > dev_priv->vram_stolen_size) {
                 sizes->surface_bpp = 16;
                 sizes->surface_depth = 16;
         }
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 11/191 nfsd4: avoid NULL deference on strange COPY compounds

In reply to Greg Kroah-Hartman

From: J. Bruce Fields <[email protected]>

[ Upstream commit d781e3df710745fbbaee4eb07fd5b64331a1b175 ]

With cross-server COPY we've introduced the possibility that the current or saved filehandle might not have fh_dentry/fh_export filled in, but we missed a place that assumed it was. I think this could be triggered by a compound like:

PUTFH(foreign filehandle)
GETATTR
SAVEFH
COPY

First, check_if_stalefh_allowed sets no_verify on the first (PUTFH) op. Then op_func = nfsd4_putfh runs and leaves current_fh->fh_export NULL. need_wrongsec_check returns true, since this PUTFH has OP_IS_PUTFH_LIKE set and GETATTR does not have OP_HANDLES_WRONGSEC set.

We should probably also consider tightening the checks in check_if_stalefh_allowed and double-checking that we don't assume the filehandle is verified elsewhere in the compound. But I think this fixes the immediate issue.

Fixes 4e48f1cccab3 "NFSD: allow inter server COPY to have... "
---
 fs/nfsd/nfs4proc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/nfsd/nfs4proc.c +2 -1
index f35aa9f88b5ec..895123518fd42 100644
@@ -1789,7 +1789,8 @@ nfsd4_proc_compound(struct svc_rqst *rqstp)
 			if (op->opdesc->op_flags & OP_CLEAR_STATEID)
 				clear_current_stateid(cstate);
 
-			if (need_wrongsec_check(rqstp))
+			if (current_fh->fh_export &&
+					need_wrongsec_check(rqstp))
 				op->status = check_nfsd_access(current_fh->fh_export, rqstp);
 		}
 encode_op:
Signature · 1 line
2.20.1
#15 lore raw

Re: [PATCH 4.19 011/191] nfsd4: avoid NULL deference on strange COPY compounds

Hi!

Quoted 15 lines

With cross-server COPY we've introduced the possibility that the current or saved filehandle might not have fh_dentry/fh_export filled in, but we missed a place that assumed it was. I think this could be triggered by a compound like:

PUTFH(foreign filehandle)
GETATTR
SAVEFH
COPY

First, check_if_stalefh_allowed sets no_verify on the first (PUTFH) op. Then op_func = nfsd4_putfh runs and leaves current_fh->fh_export NULL. need_wrongsec_check returns true, since this PUTFH has OP_IS_PUTFH_LIKE set and GETATTR does not have OP_HANDLES_WRONGSEC set.

Quoted 7 lines

We should probably also consider tightening the checks in check_if_stalefh_allowed and double-checking that we don't assume the filehandle is verified elsewhere in the compound. But I think this fixes the immediate issue.

Fixes 4e48f1cccab3 "NFSD: allow inter server COPY to have... "

AFAICT 4e48f1cccab3 "NFSD: allow inter server COPY to have... " is not part of 4.19 series, so this should not be needed in 4.19.

Best regards,

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
maintainer
#16 lore raw

Re: [PATCH 4.19 011/191] nfsd4: avoid NULL deference on strange COPY compounds

Quoted 22 lines · Pavel Machek

Hi!

Quoted 20 lines

With cross-server COPY we've introduced the possibility that the current or saved filehandle might not have fh_dentry/fh_export filled in, but we missed a place that assumed it was. I think this could be triggered by a compound like:

PUTFH(foreign filehandle)
GETATTR
SAVEFH
COPY

First, check_if_stalefh_allowed sets no_verify on the first (PUTFH) op. Then op_func = nfsd4_putfh runs and leaves current_fh->fh_export NULL. need_wrongsec_check returns true, since this PUTFH has OP_IS_PUTFH_LIKE set and GETATTR does not have OP_HANDLES_WRONGSEC set.

We should probably also consider tightening the checks in check_if_stalefh_allowed and double-checking that we don't assume the filehandle is verified elsewhere in the compound. But I think this fixes the immediate issue.

Quoted 5 lines
Quoted 2 lines
Fixes 4e48f1cccab3 "NFSD: allow inter server COPY to have... "

AFAICT 4e48f1cccab3 "NFSD: allow inter server COPY to have... " is not part of 4.19 series, so this should not be needed in 4.19.

Not only 4e48f1cccab3 isn't in 4.19, it isn't in any tree! :)

Looks like an error in the patch, I'll drop this commit from everywhere.

Signature · 2 lines
Thanks,
Sasha
author maintainer
#17 lore raw

PATCH 12/191 soc: fsl: qe: change return type of cpm_muram_alloc() to s32

In reply to Greg Kroah-Hartman

From: Rasmus Villemoes <[email protected]>

[ Upstream commit 800cd6fb76f0ec7711deb72a86c924db1ae42648 ]

There are a number of problems with cpm_muram_alloc() and its callers. Most callers assign the return value to some variable and then use IS_ERR_VALUE to check for allocation failure. However, when that variable is not sizeof(long), this leads to warnings - and it is indeed broken to do e.g.

  u32 foo = cpm_muram_alloc();
  if (IS_ERR_VALUE(foo))

on a 64-bit platform, since the condition

foo >= (unsigned long)-ENOMEM

is tautologically false. There are also callers that ignore the possibility of error, and then there are those that check for error by comparing the return value to 0...

One could fix that by changing all callers to store the return value temporarily in an "unsigned long" and test that. However, use of IS_ERR_VALUE() is error-prone and should be restricted to things which are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim for changing to the standard kernel style

  int foo = cpm_muram_alloc();
  if (foo < 0)
    deal_with_it()
  some->where = foo;

Changing the return type from unsigned long to s32 (aka signed int) doesn't change the value that gets stored into any of the callers' variables except if the caller was storing the result in a u64 _and_ the allocation failed, so in itself this patch should be a no-op.

Another problem with cpm_muram_alloc() is that it can certainly validly return 0 - and except if some cpm_muram_alloc_fixed() call interferes, the very first cpm_muram_alloc() call will return just that. But that shows that both ucc_slow_free() and ucc_fast_free() are buggy, since they assume that a value of 0 means "that field was never allocated". We'll later change cpm_muram_free() to accept (and ignore) a negative offset, so callers can use a sentinel of -1 instead of 0 and just unconditionally call cpm_muram_free().

---
 drivers/soc/fsl/qe/qe_common.c | 29 ++++++++++++++++-------------
 include/soc/fsl/qe/qe.h        | 16 ++++++++--------
 2 files changed, 24 insertions(+), 21 deletions(-)
drivers/soc/fsl/qe/qe_common.c +16 -13
index 104e68d9b84f2..4f60724b06b7c 100644
@@ -35,7 +35,7 @@ static phys_addr_t muram_pbase;
 
 struct muram_block {
 	struct list_head head;
-	unsigned long start;
+	s32 start;
 	int size;
 };
 
@@ -113,13 +113,14 @@ out_muram:
  * @algo: algorithm for alloc.
  * @data: data for genalloc's algorithm.
  *
- * This function returns an offset into the muram area.
+ * This function returns a non-negative offset into the muram area, or
+ * a negative errno on failure.
  */
-static unsigned long cpm_muram_alloc_common(unsigned long size,
-		genpool_algo_t algo, void *data)
+static s32 cpm_muram_alloc_common(unsigned long size,
+				  genpool_algo_t algo, void *data)
 {
 	struct muram_block *entry;
-	unsigned long start;
+	s32 start;
 
 	if (!muram_pool && cpm_muram_init())
 		goto out2;
@@ -140,7 +141,7 @@ static unsigned long cpm_muram_alloc_common(unsigned long size,
 out1:
 	gen_pool_free(muram_pool, start, size);
 out2:
-	return (unsigned long)-ENOMEM;
+	return -ENOMEM;
 }
 
 /*
@@ -148,13 +149,14 @@ out2:
  * @size: number of bytes to allocate
  * @align: requested alignment, in bytes
  *
- * This function returns an offset into the muram area.
+ * This function returns a non-negative offset into the muram area, or
+ * a negative errno on failure.
  * Use cpm_dpram_addr() to get the virtual address of the area.
  * Use cpm_muram_free() to free the allocation.
  */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
+s32 cpm_muram_alloc(unsigned long size, unsigned long align)
 {
-	unsigned long start;
+	s32 start;
 	unsigned long flags;
 	struct genpool_data_align muram_pool_data;
 
@@ -171,7 +173,7 @@ EXPORT_SYMBOL(cpm_muram_alloc);
  * cpm_muram_free - free a chunk of multi-user ram
  * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
  */
-int cpm_muram_free(unsigned long offset)
+int cpm_muram_free(s32 offset)
 {
 	unsigned long flags;
 	int size;
@@ -197,13 +199,14 @@ EXPORT_SYMBOL(cpm_muram_free);
  * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
  * @offset: offset of allocation start address
  * @size: number of bytes to allocate
- * This function returns an offset into the muram area
+ * This function returns @offset if the area was available, a negative
+ * errno otherwise.
  * Use cpm_dpram_addr() to get the virtual address of the area.
  * Use cpm_muram_free() to free the allocation.
  */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
 {
-	unsigned long start;
+	s32 start;
 	unsigned long flags;
 	struct genpool_data_fixed muram_pool_data_fixed;
 
include/soc/fsl/qe/qe.h +8 -8
index b3d1aff5e8ad5..deb6238416947 100644
@@ -102,26 +102,26 @@ static inline void qe_reset(void) {}
 int cpm_muram_init(void);
 
 #if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+s32 cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(s32 offset);
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
 void __iomem *cpm_muram_addr(unsigned long offset);
 unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 #else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
-					    unsigned long align)
+static inline s32 cpm_muram_alloc(unsigned long size,
+				  unsigned long align)
 {
 	return -ENOSYS;
 }
 
-static inline int cpm_muram_free(unsigned long offset)
+static inline int cpm_muram_free(s32 offset)
 {
 	return -ENOSYS;
 }
 
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
-						  unsigned long size)
+static inline s32 cpm_muram_alloc_fixed(unsigned long offset,
+					unsigned long size)
 {
 	return -ENOSYS;
 }
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 13/191 cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order

In reply to Greg Kroah-Hartman

From: Peter Zijlstra <[email protected]>

[ Upstream commit 45178ac0cea853fe0e405bf11e101bdebea57b15 ]

Paul reported a very sporadic, rcutorture induced, workqueue failure. When the planets align, the workqueue rescuer's self-migrate fails and then triggers a WARN for running a work on the wrong CPU.

Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call could be ignored! When stopper->enabled is false, stop_machine will insta complete the work, without actually doing the work. Worse, it will not WARN about this (we really should fix this).

It turns out there is a small window where a freshly online'ed CPU is marked 'online' but doesn't yet have the stopper task running:

	BP				AP

	bringup_cpu()
	  __cpu_up(cpu, idle)	 -->	start_secondary()
					...
					cpu_startup_entry()
	  bringup_wait_for_ap()
	    wait_for_ap_thread() <--	  cpuhp_online_idle()
					  while (1)
					    do_idle()

					... available to run kthreads ...

	    stop_machine_unpark()
	      stopper->enable = true;

Close this by moving the stop_machine_unpark() into cpuhp_online_idle(), such that the stopper thread is ready before we start the idle loop and schedule.

---
 kernel/cpu.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
kernel/cpu.c +9 -4
index 8d6b8b5493f9f..2d850eaaf82e3 100644
@@ -493,8 +493,7 @@ static int bringup_wait_for_ap(unsigned int cpu)
 	if (WARN_ON_ONCE((!cpu_online(cpu))))
 		return -ECANCELED;
 
-	/* Unpark the stopper thread and the hotplug thread of the target cpu */
-	stop_machine_unpark(cpu);
+	/* Unpark the hotplug thread of the target cpu */
 	kthread_unpark(st->thread);
 
 	/*
@@ -1048,8 +1047,8 @@ void notify_cpu_starting(unsigned int cpu)
 
 /*
  * Called from the idle task. Wake up the controlling task which brings the
- * stopper and the hotplug thread of the upcoming CPU up and then delegates
- * the rest of the online bringup to the hotplug thread.
+ * hotplug thread of the upcoming CPU up and then delegates the rest of the
+ * online bringup to the hotplug thread.
  */
 void cpuhp_online_idle(enum cpuhp_state state)
 {
@@ -1059,6 +1058,12 @@ void cpuhp_online_idle(enum cpuhp_state state)
 	if (state != CPUHP_AP_ONLINE_IDLE)
 		return;
 
+	/*
+	 * Unpart the stopper thread before we start the idle loop (and start
+	 * scheduling); this ensures the stopper task is always available.
+	 */
+	stop_machine_unpark(smp_processor_id());
+
 	st->state = CPUHP_AP_ONLINE_IDLE;
 	complete_ap_thread(st, true);
 }
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 14/191 brcmfmac: Fix use after free in brcmf_sdio_readframes()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 216b44000ada87a63891a8214c347e05a4aea8fe ]

The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a static checker warning:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes()
error: dereferencing freed memory 'pkt'

It looks like there was supposed to be a continue after we free "pkt".

Fixes 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine")
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +1 -0
index 5c3b62e619807..e0211321fe9e8 100644
@@ -1934,6 +1934,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 					       BRCMF_SDIO_FT_NORMAL)) {
 				rd->len = 0;
 				brcmu_pkt_buf_free_skb(pkt);
+				continue;
 			}
 			bus->sdcnt.rx_readahead_cnt++;
 			if (rd->len != roundup(rd_new.len, 16)) {
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 15/191 leds: pca963x: Fix open-drain initialization

In reply to Greg Kroah-Hartman

From: Zahari Petkov <[email protected]>

[ Upstream commit 697529091ac7a0a90ca349b914bb30641c13c753 ]

Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity") Mode register 2 was initialized directly with either 0x01 or 0x05 for open-drain or totem pole (push-pull) configuration.

Afterwards, MODE2 initialization started using bitwise operations on top of the default MODE2 register value (0x05). Using bitwise OR for setting OUTDRV with 0x01 and 0x05 does not produce correct results. When open-drain is used, instead of setting OUTDRV to 0, the driver keeps it as 1:

Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect) Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)

Now OUTDRV setting uses correct bitwise operations for initialization:

Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct) Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)

Additional MODE2 register definitions are introduced now as well.

Fixes bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
---
 drivers/leds/leds-pca963x.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/leds/leds-pca963x.c +5 -3
index 5c0908113e388..bbcde13b77f16 100644
@@ -43,6 +43,8 @@
 #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
 #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
 
+#define PCA963X_MODE2_OUTDRV	0x04	/* Open-drain or totem pole */
+#define PCA963X_MODE2_INVRT	0x10	/* Normal or inverted direction */
 #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
 
 #define PCA963X_MODE1		0x00
@@ -462,12 +464,12 @@ static int pca963x_probe(struct i2c_client *client,
 						    PCA963X_MODE2);
 		/* Configure output: open-drain or totem pole (push-pull) */
 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
-			mode2 |= 0x01;
+			mode2 &= ~PCA963X_MODE2_OUTDRV;
 		else
-			mode2 |= 0x05;
+			mode2 |= PCA963X_MODE2_OUTDRV;
 		/* Configure direction: normal or inverted */
 		if (pdata->dir == PCA963X_INVERTED)
-			mode2 |= 0x10;
+			mode2 |= PCA963X_MODE2_INVRT;
 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
 					  mode2);
 	}
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 16/191 ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT

In reply to Greg Kroah-Hartman

From: Ritesh Harjani <[email protected]>

[ Upstream commit f629afe3369e9885fd6e9cc7a4f514b6a65cf9e9 ]

Apparently our current rwsem code doesn't like doing the trylock, then lock for real scheme. So change our dax read/write methods to just do the trylock for the RWF_NOWAIT case.
This seems to fix AIM7 regression in some scalable filesystems upto ~25% in some cases. Claimed in commit 942491c9e6d6 ("xfs: fix AIM7 regression")

---
 fs/ext4/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/ext4/file.c +6 -4
index f4a24a46245ea..52d155b4e7334 100644
@@ -40,9 +40,10 @@ static ssize_t ext4_dax_read_iter(struct kiocb *iocb, struct iov_iter *to)
 	struct inode *inode = file_inode(iocb->ki_filp);
 	ssize_t ret;
 
-	if (!inode_trylock_shared(inode)) {
-		if (iocb->ki_flags & IOCB_NOWAIT)
+	if (iocb->ki_flags & IOCB_NOWAIT) {
+		if (!inode_trylock_shared(inode))
 			return -EAGAIN;
+	} else {
 		inode_lock_shared(inode);
 	}
 	/*
@@ -190,9 +191,10 @@ ext4_dax_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	struct inode *inode = file_inode(iocb->ki_filp);
 	ssize_t ret;
 
-	if (!inode_trylock(inode)) {
-		if (iocb->ki_flags & IOCB_NOWAIT)
+	if (iocb->ki_flags & IOCB_NOWAIT) {
+		if (!inode_trylock(inode))
 			return -EAGAIN;
+	} else {
 		inode_lock(inode);
 	}
 	ret = ext4_write_checks(iocb, from);
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 17/191 ALSA: ctl: allow TLV read operation for callback type of element in locked case

In reply to Greg Kroah-Hartman

From: Takashi Sakamoto <[email protected]>

[ Upstream commit d61fe22c2ae42d9fd76c34ef4224064cca4b04b0 ]

A design of ALSA control core allows applications to execute three operations for TLV feature; read, write and command. Furthermore, it allows driver developers to process the operations by two ways; allocated array or callback function. In the former, read operation is just allowed, thus developers uses the latter when device driver supports variety of models or the target model is expected to dynamically change information stored in TLV container.

The core also allows applications to lock any element so that the other applications can't perform write operation to the element for element value and TLV information. When the element is locked, write and command operation for TLV information are prohibited as well as element value. Any read operation should be allowed in the case.

At present, when an element has callback function for TLV information, TLV read operation returns EPERM if the element is locked. On the other hand, the read operation is success when an element has allocated array for TLV information. In both cases, read operation is success for element value expectedly.

This commit fixes the bug. This change can be backported to v4.14 kernel or later.

---
 sound/core/control.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/core/control.c +3 -2
index 649d3217590ed..d1312f14d78fb 100644
@@ -1468,8 +1468,9 @@ static int call_tlv_handler(struct snd_ctl_file *file, int op_flag,
 	if (kctl->tlv.c == NULL)
 		return -ENXIO;
 
-	/* When locked, this is unavailable. */
-	if (vd->owner != NULL && vd->owner != file)
+	/* Write and command operations are not allowed for locked element. */
+	if (op_flag != SNDRV_CTL_TLV_OP_READ &&
+	    vd->owner != NULL && vd->owner != file)
 		return -EPERM;
 
 	return kctl->tlv.c(kctl, op_flag, size, buf);
Signature · 1 line
2.20.1
author maintainer
#23 lore raw

PATCH 18/191 gianfar: Fix TX timestamping with a stacked DSA driver

In reply to Greg Kroah-Hartman

From: Vladimir Oltean <[email protected]>

[ Upstream commit c26a2c2ddc0115eb088873f5c309cf46b982f522 ]

The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue.

But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing.

Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar.

There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver.

So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it.

[0]: https://www.spinics.net/lists/netdev/msg619699.html

Fixes f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support")
---
 drivers/net/ethernet/freescale/gianfar.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/net/ethernet/freescale/gianfar.c +7 -3
index c97c4edfa31bc..cf2d1e846a692 100644
@@ -2685,13 +2685,17 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 	skb_dirtytx = tx_queue->skb_dirtytx;
 
 	while ((skb = tx_queue->tx_skbuff[skb_dirtytx])) {
+		bool do_tstamp;
+
+		do_tstamp = (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+			    priv->hwts_tx_en;
 
 		frags = skb_shinfo(skb)->nr_frags;
 
 		/* When time stamping, one additional TxBD must be freed.
 		 * Also, we need to dma_unmap_single() the TxPAL.
 		 */
-		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
+		if (unlikely(do_tstamp))
 			nr_txbds = frags + 2;
 		else
 			nr_txbds = frags + 1;
@@ -2705,7 +2709,7 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 		    (lstatus & BD_LENGTH_MASK))
 			break;
 
-		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) {
+		if (unlikely(do_tstamp)) {
 			next = next_txbd(bdp, base, tx_ring_size);
 			buflen = be16_to_cpu(next->length) +
 				 GMAC_FCB_LEN + GMAC_TXPAL_LEN;
@@ -2715,7 +2719,7 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 		dma_unmap_single(priv->dev, be32_to_cpu(bdp->bufPtr),
 				 buflen, DMA_TO_DEVICE);
 
-		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) {
+		if (unlikely(do_tstamp)) {
 			struct skb_shared_hwtstamps shhwtstamps;
 			u64 *ns = (u64 *)(((uintptr_t)skb->data + 0x10) &
 					  ~0x7UL);
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 19/191 pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs.

Fix this by:
- Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal,
- Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs,
- Adding the missing function GPIO definition for "CTX0&CTX1" to

    pinmux_func_gpios[],

- Moving all CAN enums next to each other.

See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00:
[1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version),
[2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version,
[3] Table 1.4 List of Pins,
[4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel),
[5] Table 32.10 Multiplexed Pins (Port J),
[6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).

Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong.

---
 drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/pinctrl/sh-pfc/pfc-sh7264.c +4 -5
index e1c34e19222ee..3ddb9565ed804 100644
@@ -500,17 +500,15 @@ enum {
 	SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK,
 	CRX0_MARK, CRX1_MARK,
 	CTX0_MARK, CTX1_MARK,
+	CRX0_CRX1_MARK, CTX0_CTX1_MARK,
 
 	PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
 	PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
 	PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
 	PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
 	IERXD_MARK, IETXD_MARK,
-	CRX0_CRX1_MARK,
 	WDTOVF_MARK,
 
-	CRX0X1_MARK,
-
 	/* DMAC */
 	TEND0_MARK, DACK0_MARK, DREQ0_MARK,
 	TEND1_MARK, DACK1_MARK, DREQ1_MARK,
@@ -998,12 +996,12 @@ static const u16 pinmux_data[] = {
 
 	PINMUX_DATA(PJ3_DATA, PJ3MD_00),
 	PINMUX_DATA(CRX1_MARK, PJ3MD_01),
-	PINMUX_DATA(CRX0X1_MARK, PJ3MD_10),
+	PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),
 
 	PINMUX_DATA(PJ2_DATA, PJ2MD_000),
 	PINMUX_DATA(CTX1_MARK, PJ2MD_001),
-	PINMUX_DATA(CRX0_CRX1_MARK, PJ2MD_010),
+	PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010),
 	PINMUX_DATA(CS2_MARK, PJ2MD_011),
 	PINMUX_DATA(SCK0_MARK, PJ2MD_100),
 	PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101),
@@ -1248,6 +1246,7 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(CTX1),
 	GPIO_FN(CRX1),
 	GPIO_FN(CTX0),
+	GPIO_FN(CTX0_CTX1),
 	GPIO_FN(CRX0),
 	GPIO_FN(CRX0_CRX1),
 
Signature · 1 line
2.20.1
author maintainer
#25 lore raw

PATCH 20/191 pxa168fb: Fix the function used to release some memory in an error handling path

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 3c911fe799d1c338d94b78e7182ad452c37af897 ]

In the probe function, some resources are allocated using 'dma_alloc_wc()', they should be released with 'dma_free_wc()', not 'dma_free_coherent()'.

We already use 'dma_free_wc()' in the remove function, but not in the error handling path of the probe function.

Also, remove a useless 'PAGE_ALIGN()'. 'info->fix.smem_len' is already PAGE_ALIGNed.

Fixes 638772c7553f ("fb: add support of LCD display controller on pxa168/910 (base layer)")
CC YueHaibing <[email protected]>
---
 drivers/video/fbdev/pxa168fb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/video/fbdev/pxa168fb.c +3 -3
index d059d04c63acd..20195d3dbf088 100644
@@ -769,8 +769,8 @@ failed_free_cmap:
 failed_free_clk:
 	clk_disable_unprepare(fbi->clk);
 failed_free_fbmem:
-	dma_free_coherent(fbi->dev, info->fix.smem_len,
-			info->screen_base, fbi->fb_start_dma);
+	dma_free_wc(fbi->dev, info->fix.smem_len,
+		    info->screen_base, fbi->fb_start_dma);
 failed_free_info:
 	kfree(info);
 
@@ -804,7 +804,7 @@ static int pxa168fb_remove(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 
-	dma_free_wc(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+	dma_free_wc(fbi->dev, info->fix.smem_len,
 		    info->screen_base, info->fix.smem_start);
 
 	clk_disable_unprepare(fbi->clk);
Signature · 1 line
2.20.1
author maintainer
#26 lore raw

PATCH 21/191 media: i2c: mt9v032: fix enum mbus codes and frame sizes

In reply to Greg Kroah-Hartman

From: Eugen Hristev <[email protected]>

[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]

This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors. Depending on which sensor is used, the format from the sensor is different. The format.code inside the dev struct holds this information. The enum mbus and enum frame sizes need to take into account both type of sensors, not just the color one. To solve this, use the format.code in these functions instead of the hardcoded bayer color format (which is only used for mt9v032).

[Sakari Ailus: rewrapped commit message]

---
 drivers/media/i2c/mt9v032.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/media/i2c/mt9v032.c +8 -2
index f74730d24d8fe..04788692c9ff4 100644
@@ -431,10 +431,12 @@ static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev,
 				  struct v4l2_subdev_pad_config *cfg,
 				  struct v4l2_subdev_mbus_code_enum *code)
 {
+	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
+
 	if (code->index > 0)
 		return -EINVAL;
 
-	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	code->code = mt9v032->format.code;
 	return 0;
 }
 
@@ -442,7 +444,11 @@ static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev,
 				   struct v4l2_subdev_pad_config *cfg,
 				   struct v4l2_subdev_frame_size_enum *fse)
 {
-	if (fse->index >= 3 || fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
+
+	if (fse->index >= 3)
+		return -EINVAL;
+	if (mt9v032->format.code != fse->code)
 		return -EINVAL;
 
 	fse->min_width = MT9V032_WINDOW_WIDTH_DEF / (1 << fse->index);
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 22/191 powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number

In reply to Greg Kroah-Hartman

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 3b5b9997b331e77ce967eba2c4bc80dc3134a7fe ]

On pseries there is a bug with adding hotplugged devices to an IOMMU group. For a number of dumb reasons fixing that bug first requires re-working how VFs are configured on PowerNV. For background, on PowerNV we use the pcibios_sriov_enable() hook to do two things:

1. Create a pci_dn structure for each of the VFs, and
2. Configure the PHB's internal BARs so the MMIO range for each VF maps to a unique PE.

Roughly speaking a PE is the hardware counterpart to a Linux IOMMU group since all the devices in a PE share the same IOMMU table. A PE also defines the set of devices that should be isolated in response to a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all MMIO and DMA traffic to and from devicein the PE is blocked by the root complex until the PE is recovered by the OS.

The requirement to block MMIO causes a giant headache because the P8 PHB generally uses a fixed mapping between MMIO addresses and PEs. As a result we need to delay configuring the IOMMU groups for device until after MMIO resources are assigned. For physical devices (i.e. non-VFs) the PE assignment is done in pcibios_setup_bridge() which is called immediately after the MMIO resources for downstream devices (and the bridge's windows) are assigned. For VFs the setup is more complicated because:

a) pcibios_setup_bridge() is not called again when VFs are activated, and
b) The pci_dev for VFs are created by generic code which runs after pcibios_sriov_enable() is called.

The work around for this is a two step process:

1. A fixup in pcibios_add_device() is used to initialised the cached pe_number in pci_dn, then
2. A bus notifier then adds the device to the IOMMU group for the PE

     specified in pci_dn->pe_number.

A side effect fixing the pseries bug mentioned in the first paragraph is moving the fixup out of pcibios_add_device() and into pcibios_bus_add_device(), which is called much later. This results in step 2. failing because pci_dn->pe_number won't be initialised when the bus notifier is run.

We can fix this by removing the need for the fixup. The PE for a VF is known before the VF is even scanned so we can initialise pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately, moving the initialisation causes two problems:

1. We trip the WARN_ON() in the current fixup code, and
2. The EEH core clears pdn->pe_number when recovering a VF and relies on the fixup to correctly re-set it.

The only justification for either of these is a comment in eeh_rmv_device() suggesting that pdn->pe_number *must* be set to IODA_INVALID_PE in order for the VF to be scanned. However, this comment appears to have no basis in reality. Both bugs can be fixed by just deleting the code.

---
 arch/powerpc/kernel/eeh_driver.c          |  6 ------
 arch/powerpc/platforms/powernv/pci-ioda.c | 19 +++++++++++++++----
 arch/powerpc/platforms/powernv/pci.c      |  4 ----
 3 files changed, 15 insertions(+), 14 deletions(-)
arch/powerpc/kernel/eeh_driver.c +0 -6
index af1f3d5f9a0f7..377d23f58197a 100644
@@ -554,12 +554,6 @@ static void *eeh_rmv_device(struct eeh_dev *edev, void *userdata)
 
 		pci_iov_remove_virtfn(edev->physfn, pdn->vf_index);
 		edev->pdev = NULL;
-
-		/*
-		 * We have to set the VF PE number to invalid one, which is
-		 * required to plug the VF successfully.
-		 */
-		pdn->pe_number = IODA_INVALID_PE;
 #endif
 		if (rmv_data)
 			list_add(&edev->rmv_list, &rmv_data->edev_list);
arch/powerpc/platforms/powernv/pci-ioda.c +15 -4
index ee63749a2d47e..28adfe4dd04c5 100644
@@ -1552,6 +1552,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 
 	/* Reserve PE for each VF */
 	for (vf_index = 0; vf_index < num_vfs; vf_index++) {
+		int vf_devfn = pci_iov_virtfn_devfn(pdev, vf_index);
+		int vf_bus = pci_iov_virtfn_bus(pdev, vf_index);
+		struct pci_dn *vf_pdn;
+
 		if (pdn->m64_single_mode)
 			pe_num = pdn->pe_num_map[vf_index];
 		else
@@ -1564,13 +1568,11 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 		pe->pbus = NULL;
 		pe->parent_dev = pdev;
 		pe->mve_number = -1;
-		pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
-			   pci_iov_virtfn_devfn(pdev, vf_index);
+		pe->rid = (vf_bus << 8) | vf_devfn;
 
 		pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%x\n",
 			hose->global_number, pdev->bus->number,
-			PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
-			PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
+			PCI_SLOT(vf_devfn), PCI_FUNC(vf_devfn), pe_num);
 
 		if (pnv_ioda_configure_pe(phb, pe)) {
 			/* XXX What do we do here ? */
@@ -1584,6 +1586,15 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 		list_add_tail(&pe->list, &phb->ioda.pe_list);
 		mutex_unlock(&phb->ioda.pe_list_mutex);
 
+		/* associate this pe to it's pdn */
+		list_for_each_entry(vf_pdn, &pdn->parent->child_list, list) {
+			if (vf_pdn->busno == vf_bus &&
+			    vf_pdn->devfn == vf_devfn) {
+				vf_pdn->pe_number = pe_num;
+				break;
+			}
+		}
+
 		pnv_pci_ioda2_setup_dma_pe(phb, pe);
 	}
 }
arch/powerpc/platforms/powernv/pci.c +0 -4
index c846300b78368..aa95b8e0f66ad 100644
@@ -822,16 +822,12 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 	struct pnv_phb *phb = hose->private_data;
 #ifdef CONFIG_PCI_IOV
 	struct pnv_ioda_pe *pe;
-	struct pci_dn *pdn;
 
 	/* Fix the VF pdn PE number */
 	if (pdev->is_virtfn) {
-		pdn = pci_get_pdn(pdev);
-		WARN_ON(pdn->pe_number != IODA_INVALID_PE);
 		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
 			if (pe->rid == ((pdev->bus->number << 8) |
 			    (pdev->devfn & 0xff))) {
-				pdn->pe_number = pe->pe_number;
 				pe->pdev = pdev;
 				break;
 			}
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 23/191 gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit e36eaf94be8f7bc4e686246eed3cf92d845e2ef8 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/gpio/gpio-grgpio.c, 261:
request_irq in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 255:
_raw_spin_lock_irqsave in grgpio_irq_map

drivers/gpio/gpio-grgpio.c, 318:
free_irq in grgpio_irq_unmap
drivers/gpio/gpio-grgpio.c, 299:
_raw_spin_lock_irqsave in grgpio_irq_unmap

request_irq() and free_irq() can sleep at runtime.

To fix these bugs, request_irq() and free_irq() are called without holding the spinlock.

These bugs are found by a static analysis tool STCheck written by myself.

---
 drivers/gpio/gpio-grgpio.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/gpio/gpio-grgpio.c +6 -4
index 60a1556c570a4..c1be299e5567b 100644
@@ -258,17 +258,16 @@ static int grgpio_irq_map(struct irq_domain *d, unsigned int irq,
 	lirq->irq = irq;
 	uirq = &priv->uirqs[lirq->index];
 	if (uirq->refcnt == 0) {
+		spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
 		ret = request_irq(uirq->uirq, grgpio_irq_handler, 0,
 				  dev_name(priv->dev), priv);
 		if (ret) {
 			dev_err(priv->dev,
 				"Could not request underlying irq %d\n",
 				uirq->uirq);
-
-			spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
-
 			return ret;
 		}
+		spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
 	}
 	uirq->refcnt++;
 
@@ -314,8 +313,11 @@ static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq)
 	if (index >= 0) {
 		uirq = &priv->uirqs[lirq->index];
 		uirq->refcnt--;
-		if (uirq->refcnt == 0)
+		if (uirq->refcnt == 0) {
+			spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
 			free_irq(uirq->uirq, priv);
+			return;
+		}
 	}
 
 	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
Signature · 1 line
2.20.1
#29 lore raw

Re: [PATCH 4.19 023/191] gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()

Hi!

Quoted 5 lines

From: Jia-Ju Bai <[email protected]>

[ Upstream commit e36eaf94be8f7bc4e686246eed3cf92d845e2ef8 ]

The driver may sleep while holding a spinlock.

True.

But you can't fix the bug by simply removing the locking, as now nothing prevents grgpio_irq_unmap() from running while grgpio_irq_map() is proceeding.

grgpio_irq_map()

	lirq->irq = irq;
	(drops the lock)

grgpio_irq_unmap()
(gets the lock)

 	if (lirq->irq == irq) {
	 	...
		(proceeds to work with half-initialized structure)

Best regards,
Pavel

Quoted 36 lines

index 60a1556c570a4..c1be299e5567b 100644

drivers/gpio/gpio-grgpio.c +6 -4
@@ -258,17 +258,16 @@ static int grgpio_irq_map(struct irq_domain *d, unsigned int irq,
 	lirq->irq = irq;
 	uirq = &priv->uirqs[lirq->index];
 	if (uirq->refcnt == 0) {
+		spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
 		ret = request_irq(uirq->uirq, grgpio_irq_handler, 0,
 				  dev_name(priv->dev), priv);
 		if (ret) {
 			dev_err(priv->dev,
 				"Could not request underlying irq %d\n",
 				uirq->uirq);
-
-			spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
-
 			return ret;
 		}
+		spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
 	}
 	uirq->refcnt++;
 
@@ -314,8 +313,11 @@ static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq)
 	if (index >= 0) {
 		uirq = &priv->uirqs[lirq->index];
 		uirq->refcnt--;
-		if (uirq->refcnt == 0)
+		if (uirq->refcnt == 0) {
+			spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
 			free_irq(uirq->uirq, priv);
+			return;
+		}
 	}
 
 	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#30 lore raw

PATCH 24/191 iommu/vt-d: Fix off-by-one in PASID allocation

In reply to Greg Kroah-Hartman

From: Jacob Pan <[email protected]>

[ Upstream commit 39d630e332144028f56abba83d94291978e72df1 ]

PASID allocator uses IDR which is exclusive for the end of the allocation range. There is no need to decrement pasid_max.

Fixes af39507305fb ("iommu/vt-d: Apply global PASID in SVA")
---
 drivers/iommu/intel-svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/intel-svm.c +1 -1
index fd8730b2cd46e..5944d3b4dca37 100644
@@ -377,7 +377,7 @@ int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_
 		/* Do not use PASID 0 in caching mode (virtualised IOMMU) */
 		ret = intel_pasid_alloc_id(svm,
 					   !!cap_caching_mode(iommu->cap),
-					   pasid_max - 1, GFP_KERNEL);
+					   pasid_max, GFP_KERNEL);
 		if (ret < 0) {
 			kfree(svm);
 			kfree(sdev);
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 25/191 char/random: silence a lockdep splat with printk()

In reply to Greg Kroah-Hartman

From: Sergey Senozhatsky <[email protected]>

[ Upstream commit 1b710b1b10eff9d46666064ea25f079f70bc67a8 ]

Sergey didn't like the locking order,

uart_port->lock -> tty_port->lock

uart_write (uart_port->lock)
__uart_start

    pl011_start_tx
      pl011_tx_chars
        uart_write_wakeup
          tty_port_tty_wakeup
            tty_port_default
              tty_port_tty_get (tty_port->lock)

but those code is so old, and I have no clue how to de-couple it after checking other locks in the splat. There is an onging effort to make all printk() as deferred, so until that happens, workaround it for now as a short-term fix.

LTP: starting iogen01 (export LTPROOT; rwtest -N iogen01 -i 120s -s read,write -Da -Dv -n 2 500b:$TMPDIR/doio.f1.$$ 1000b:$TMPDIR/doio.f2.$$)
WARNING: possible circular locking dependency detected
------------------------------------------------------
doio/49441 is trying to acquire lock:
ffff008b7cff7290 (&(&zone->lock)->rlock){..-.}, at: rmqueue+0x138/0x2050

but task is already holding lock:
60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (&pool->lock/1){-.-.}:

       lock_acquire+0x320/0x360
       _raw_spin_lock+0x64/0x80
       __queue_work+0x4b4/0xa10
       queue_work_on+0xac/0x11c
       tty_schedule_flip+0x84/0xbc
       tty_flip_buffer_push+0x1c/0x28
       pty_write+0x98/0xd0
       n_tty_write+0x450/0x60c
       tty_write+0x338/0x474
       __vfs_write+0x88/0x214
       vfs_write+0x12c/0x1a4
       redirected_tty_write+0x90/0xdc
       do_loop_readv_writev+0x140/0x180
       do_iter_write+0xe0/0x10c
       vfs_writev+0x134/0x1cc
       do_writev+0xbc/0x130
       __arm64_sys_writev+0x58/0x8c
       el0_svc_handler+0x170/0x240
       el0_sync_handler+0x150/0x250
       el0_sync+0x164/0x180

-> #3 (&(&port->lock)->rlock){-.-.}:

       lock_acquire+0x320/0x360
       _raw_spin_lock_irqsave+0x7c/0x9c
       tty_port_tty_get+0x24/0x60
       tty_port_default_wakeup+0x1c/0x3c
       tty_port_tty_wakeup+0x34/0x40
       uart_write_wakeup+0x28/0x44
       pl011_tx_chars+0x1b8/0x270
       pl011_start_tx+0x24/0x70
       __uart_start+0x5c/0x68
       uart_write+0x164/0x1c8
       do_output_char+0x33c/0x348
       n_tty_write+0x4bc/0x60c
       tty_write+0x338/0x474
       redirected_tty_write+0xc0/0xdc
       do_loop_readv_writev+0x140/0x180
       do_iter_write+0xe0/0x10c
       vfs_writev+0x134/0x1cc
       do_writev+0xbc/0x130
       __arm64_sys_writev+0x58/0x8c
       el0_svc_handler+0x170/0x240
       el0_sync_handler+0x150/0x250
       el0_sync+0x164/0x180

-> #2 (&port_lock_key){-.-.}:

       lock_acquire+0x320/0x360
       _raw_spin_lock+0x64/0x80
       pl011_console_write+0xec/0x2cc
       console_unlock+0x794/0x96c
       vprintk_emit+0x260/0x31c
       vprintk_default+0x54/0x7c
       vprintk_func+0x218/0x254
       printk+0x7c/0xa4
       register_console+0x734/0x7b0
       uart_add_one_port+0x734/0x834
       pl011_register_port+0x6c/0xac
       sbsa_uart_probe+0x234/0x2ec
       platform_drv_probe+0xd4/0x124
       really_probe+0x250/0x71c
       driver_probe_device+0xb4/0x200
       __device_attach_driver+0xd8/0x188
       bus_for_each_drv+0xbc/0x110
       __device_attach+0x120/0x220
       device_initial_probe+0x20/0x2c
       bus_probe_device+0x54/0x100
       device_add+0xae8/0xc2c
       platform_device_add+0x278/0x3b8
       platform_device_register_full+0x238/0x2ac
       acpi_create_platform_device+0x2dc/0x3a8
       acpi_bus_attach+0x390/0x3cc
       acpi_bus_attach+0x108/0x3cc
       acpi_bus_attach+0x108/0x3cc
       acpi_bus_attach+0x108/0x3cc
       acpi_bus_scan+0x7c/0xb0
       acpi_scan_init+0xe4/0x304
       acpi_init+0x100/0x114
       do_one_initcall+0x348/0x6a0
       do_initcall_level+0x190/0x1fc
       do_basic_setup+0x34/0x4c
       kernel_init_freeable+0x19c/0x260
       kernel_init+0x18/0x338
       ret_from_fork+0x10/0x18

-> #1 (console_owner){-...}:

       lock_acquire+0x320/0x360
       console_lock_spinning_enable+0x6c/0x7c
       console_unlock+0x4f8/0x96c
       vprintk_emit+0x260/0x31c
       vprintk_default+0x54/0x7c
       vprintk_func+0x218/0x254
       printk+0x7c/0xa4
       get_random_u64+0x1c4/0x1dc
       shuffle_pick_tail+0x40/0xac
       __free_one_page+0x424/0x710
       free_one_page+0x70/0x120
       __free_pages_ok+0x61c/0xa94
       __free_pages_core+0x1bc/0x294
       memblock_free_pages+0x38/0x48
       __free_pages_memory+0xcc/0xfc
       __free_memory_core+0x70/0x78
       free_low_memory_core_early+0x148/0x18c
       memblock_free_all+0x18/0x54
       mem_init+0xb4/0x17c
       mm_init+0x14/0x38
       start_kernel+0x19c/0x530

-> #0 (&(&zone->lock)->rlock){..-.}:

       validate_chain+0xf6c/0x2e2c
       __lock_acquire+0x868/0xc2c
       lock_acquire+0x320/0x360
       _raw_spin_lock+0x64/0x80
       rmqueue+0x138/0x2050
       get_page_from_freelist+0x474/0x688
       __alloc_pages_nodemask+0x3b4/0x18dc
       alloc_pages_current+0xd0/0xe0
       alloc_slab_page+0x2b4/0x5e0
       new_slab+0xc8/0x6bc
       ___slab_alloc+0x3b8/0x640
       kmem_cache_alloc+0x4b4/0x588
       __debug_object_init+0x778/0x8b4
       debug_object_init_on_stack+0x40/0x50
       start_flush_work+0x16c/0x3f0
       __flush_work+0xb8/0x124
       flush_work+0x20/0x30
       xlog_cil_force_lsn+0x88/0x204 [xfs]
       xfs_log_force_lsn+0x128/0x1b8 [xfs]
       xfs_file_fsync+0x3c4/0x488 [xfs]
       vfs_fsync_range+0xb0/0xd0
       generic_write_sync+0x80/0xa0 [xfs]
       xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs]
       xfs_file_write_iter+0x1a0/0x218 [xfs]
       __vfs_write+0x1cc/0x214
       vfs_write+0x12c/0x1a4
       ksys_write+0xb0/0x120
       __arm64_sys_write+0x54/0x88
       el0_svc_handler+0x170/0x240
       el0_sync_handler+0x150/0x250
       el0_sync+0x164/0x180

other info that might help us debug this:

 Chain exists of:
   &(&zone->lock)->rlock --> &(&port->lock)->rlock --> &pool->lock/1

 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(&pool->lock/1);
                               lock(&(&port->lock)->rlock);
                               lock(&pool->lock/1);

lock(&(&zone->lock)->rlock);

                *** DEADLOCK ***

4 locks held by doio/49441:
#0: a0ff00886fc27408 (sb_writers#8){.+.+}, at: vfs_write+0x118/0x1a4 #1: 8fff00080810dfe0 (&xfs_nondir_ilock_class){++++}, at:

xfs_ilock+0x2a8/0x300 [xfs]
 #2: ffff9000129f2390 (rcu_read_lock){....}, at:
rcu_lock_acquire+0x8/0x38
 #3: 60ff000822352818 (&pool->lock/1){-.-.}, at:
start_flush_work+0xd8/0x3f0

               stack backtrace:
CPU: 48 PID: 49441 Comm: doio Tainted: G        W
Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS
L50_5.13_1.11 06/18/2019
Call trace:
 dump_backtrace+0x0/0x248
 show_stack+0x20/0x2c
 dump_stack+0xe8/0x150
 print_circular_bug+0x368/0x380
 check_noncircular+0x28c/0x294
 validate_chain+0xf6c/0x2e2c
 __lock_acquire+0x868/0xc2c
 lock_acquire+0x320/0x360
 _raw_spin_lock+0x64/0x80
 rmqueue+0x138/0x2050
 get_page_from_freelist+0x474/0x688
 __alloc_pages_nodemask+0x3b4/0x18dc
 alloc_pages_current+0xd0/0xe0
 alloc_slab_page+0x2b4/0x5e0
 new_slab+0xc8/0x6bc
 ___slab_alloc+0x3b8/0x640
 kmem_cache_alloc+0x4b4/0x588
 __debug_object_init+0x778/0x8b4
 debug_object_init_on_stack+0x40/0x50
 start_flush_work+0x16c/0x3f0
 __flush_work+0xb8/0x124
 flush_work+0x20/0x30
 xlog_cil_force_lsn+0x88/0x204 [xfs]
 xfs_log_force_lsn+0x128/0x1b8 [xfs]
 xfs_file_fsync+0x3c4/0x488 [xfs]
 vfs_fsync_range+0xb0/0xd0
 generic_write_sync+0x80/0xa0 [xfs]
 xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs]
 xfs_file_write_iter+0x1a0/0x218 [xfs]
 __vfs_write+0x1cc/0x214
 vfs_write+0x12c/0x1a4
 ksys_write+0xb0/0x120
 __arm64_sys_write+0x54/0x88
 el0_svc_handler+0x170/0x240
 el0_sync_handler+0x150/0x250
 el0_sync+0x164/0x180
---
 drivers/char/random.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/char/random.c +3 -2
index 53e822793d463..28b110cd39775 100644
@@ -1609,8 +1609,9 @@ static void _warn_unseeded_randomness(const char *func_name, void *caller,
 	print_once = true;
 #endif
 	if (__ratelimit(&unseeded_warning))
-		pr_notice("random: %s called from %pS with crng_init=%d\n",
-			  func_name, caller, crng_init);
+		printk_deferred(KERN_NOTICE "random: %s called from %pS "
+				"with crng_init=%d\n", func_name, caller,
+				crng_init);
 }
 
 /*
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 26/191 media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
_raw_spin_lock_irqsave in bdisp_device_run

To fix this bug, msleep() is replaced with udelay().

This bug is found by a static analysis tool STCheck written by myself.

---
 drivers/media/platform/sti/bdisp/bdisp-hw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/media/platform/sti/bdisp/bdisp-hw.c +3 -3
index 26d9fa7aeb5f2..d57f659d740a1 100644
@@ -14,8 +14,8 @@
 #define MAX_SRC_WIDTH           2048
 
 /* Reset & boot poll config */
-#define POLL_RST_MAX            50
-#define POLL_RST_DELAY_MS       20
+#define POLL_RST_MAX            500
+#define POLL_RST_DELAY_MS       2
 
 enum bdisp_target_plan {
 	BDISP_RGB,
@@ -382,7 +382,7 @@ int bdisp_hw_reset(struct bdisp_dev *bdisp)
 	for (i = 0; i < POLL_RST_MAX; i++) {
 		if (readl(bdisp->regs + BLT_STA1) & BLT_STA1_IDLE)
 			break;
-		msleep(POLL_RST_DELAY_MS);
+		udelay(POLL_RST_DELAY_MS * 1000);
 	}
 	if (i == POLL_RST_MAX)
 		dev_err(bdisp->dev, "Reset timeout\n");
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 27/191 pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]

Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode.

On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource.

This works fine, until the goodix driver gets rmmod-ed and then insmod-ed again. In this case byt_gpio_disable_free() calls byt_gpio_clear_triggering() which clears the IRQ flags and after that the (direct) IRQ no longer triggers.

This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag to byt_gpio_clear_triggering().

Note that byt_gpio_clear_triggering() only gets called from byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded from the irq_valid mask by byt_init_irq_valid_mask().

---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/pinctrl/intel/pinctrl-baytrail.c +7 -1
index 021e28ff1194e..a760d8bda0af7 100644
@@ -950,7 +950,13 @@ static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)
 
 	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
-	value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
+	/* Do not clear direct-irq enabled IRQs (from gpio_disable_free) */
+	if (value & BYT_DIRECT_IRQ_EN)
+		/* nothing to do */ ;
+	else
+		value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
 	writel(value, reg);
 	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 28/191 efi/x86: Map the entire EFI vendor string before copying it

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

[ Upstream commit ffc2760bcf2dba0dbef74013ed73eea8310cc52c ]

Fix a couple of issues with the way we map and copy the vendor string:
- we map only 2 bytes, which usually works since you get at least a page, but if the vendor string happens to cross a page boundary, a crash will result
- only call early_memunmap() if early_memremap() succeeded, or we will call it with a NULL address which it doesn't like,
- while at it, switch to early_memremap_ro(), and array indexing rather than pointer dereferencing to read the CHAR16 characters.

Cc Andy Lutomirski <[email protected]>
Cc Ard Biesheuvel <[email protected]>
Cc Arvind Sankar <[email protected]>
Cc Matthew Garrett <[email protected]>
Fixes 5b83683f32b1 ("x86: EFI runtime service support")
---
 arch/x86/platform/efi/efi.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
arch/x86/platform/efi/efi.c +7 -6
index 335a62e74a2e9..5b0275310070e 100644
@@ -480,7 +480,6 @@ void __init efi_init(void)
 	efi_char16_t *c16;
 	char vendor[100] = "unknown";
 	int i = 0;
-	void *tmp;
 
 #ifdef CONFIG_X86_32
 	if (boot_params.efi_info.efi_systab_hi ||
@@ -505,14 +504,16 @@ void __init efi_init(void)
 	/*
 	 * Show what we know for posterity
 	 */
-	c16 = tmp = early_memremap(efi.systab->fw_vendor, 2);
+	c16 = early_memremap_ro(efi.systab->fw_vendor,
+				sizeof(vendor) * sizeof(efi_char16_t));
 	if (c16) {
-		for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i)
-			vendor[i] = *c16++;
+		for (i = 0; i < sizeof(vendor) - 1 && c16[i]; ++i)
+			vendor[i] = c16[i];
 		vendor[i] = '\0';
-	} else
+		early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t));
+	} else {
 		pr_err("Could not map the firmware vendor!\n");
-	early_memunmap(tmp, 2);
+	}
 
 	pr_info("EFI v%u.%.02u by %s\n",
 		efi.systab->hdr.revision >> 16,
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 29/191 MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()

In reply to Greg Kroah-Hartman

From: Tiezhu Yang <[email protected]>

[ Upstream commit 72d052e28d1d2363f9107be63ef3a3afdea6143c ]

If kzalloc fails, it should return -ENOMEM, otherwise may trigger a NULL pointer dereference.

Fixes 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface")
Cc Ralf Baechle <[email protected]>
Cc Huacai Chen <[email protected]>
Cc Jiaxun Yang <[email protected]>
---
 arch/mips/loongson64/loongson-3/platform.c | 3 +++
 1 file changed, 3 insertions(+)
arch/mips/loongson64/loongson-3/platform.c +3 -0
index 25a97cc0ee336..0db4cc3196ebd 100644
@@ -31,6 +31,9 @@ static int __init loongson3_platform_init(void)
 			continue;
 
 		pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+		if (!pdev)
+			return -ENOMEM;
+
 		pdev->name = loongson_sysconf.sensors[i].name;
 		pdev->id = loongson_sysconf.sensors[i].id;
 		pdev->dev.platform_data = &loongson_sysconf.sensors[i];
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 30/191 sparc: Add .exit.data section.

In reply to Greg Kroah-Hartman

From: David S. Miller <[email protected]>

[ Upstream commit 548f0b9a5f4cffa0cecf62eb12aa8db682e4eee6 ]

This fixes build errors of all sorts.

Also, emit .exit.text unconditionally.

---
 arch/sparc/kernel/vmlinux.lds.S | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
arch/sparc/kernel/vmlinux.lds.S +4 -2
index 61afd787bd0c7..59b6df13ddead 100644
@@ -172,12 +172,14 @@ SECTIONS
 	}
 	PERCPU_SECTION(SMP_CACHE_BYTES)
 
-#ifdef CONFIG_JUMP_LABEL
 	. = ALIGN(PAGE_SIZE);
 	.exit.text : {
 		EXIT_TEXT
 	}
-#endif
+
+	.exit.data : {
+		EXIT_DATA
+	}
 
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 31/191 uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit b74351287d4bd90636c3f48bc188c2f53824c2d4 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

kernel/irq/manage.c, 523:
synchronize_irq in disable_irq
drivers/uio/uio_dmem_genirq.c, 140:
disable_irq in uio_dmem_genirq_irqcontrol
drivers/uio/uio_dmem_genirq.c, 134:
_raw_spin_lock_irqsave in uio_dmem_genirq_irqcontrol

synchronize_irq() can sleep at runtime.

To fix this bug, disable_irq() is called without holding the spinlock.

This bug is found by a static analysis tool STCheck written by myself.

---
 drivers/uio/uio_dmem_genirq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/uio/uio_dmem_genirq.c +4 -2
index e1134a4d97f3f..a00b4aee6c799 100644
@@ -135,11 +135,13 @@ static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
 	if (irq_on) {
 		if (test_and_clear_bit(0, &priv->flags))
 			enable_irq(dev_info->irq);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	} else {
-		if (!test_and_set_bit(0, &priv->flags))
+		if (!test_and_set_bit(0, &priv->flags)) {
+			spin_unlock_irqrestore(&priv->lock, flags);
 			disable_irq(dev_info->irq);
+		}
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 32/191 usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 9c1ed62ae0690dfe5d5e31d8f70e70a95cb48e52 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/usb/gadget/udc/core.c, 1175:
kzalloc(GFP_KERNEL) in usb_add_gadget_udc_release
drivers/usb/gadget/udc/core.c, 1272:
usb_add_gadget_udc_release in usb_add_gadget_udc
drivers/usb/gadget/udc/gr_udc.c, 2186:
usb_add_gadget_udc in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

drivers/usb/gadget/udc/core.c, 1195:
mutex_lock in usb_add_gadget_udc_release
drivers/usb/gadget/udc/core.c, 1272:
usb_add_gadget_udc_release in usb_add_gadget_udc
drivers/usb/gadget/udc/gr_udc.c, 2186:
usb_add_gadget_udc in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

drivers/usb/gadget/udc/gr_udc.c, 212:
debugfs_create_file in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2197:
gr_dfs_create in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

drivers/usb/gadget/udc/gr_udc.c, 2114:
devm_request_threaded_irq in gr_request_irq
drivers/usb/gadget/udc/gr_udc.c, 2202:
gr_request_irq in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

kzalloc(GFP_KERNEL), mutex_lock(), debugfs_create_file() and devm_request_threaded_irq() can sleep at runtime.

To fix these possible bugs, usb_add_gadget_udc(), gr_dfs_create() and gr_request_irq() are called without handling the spinlock.

These bugs are found by a static analysis tool STCheck written by myself.

---
 drivers/usb/gadget/udc/gr_udc.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/usb/gadget/udc/gr_udc.c +9 -7
index 729e60e495641..e50108f9a374e 100644
@@ -2180,8 +2180,6 @@ static int gr_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	spin_lock(&dev->lock);
-
 	/* Inside lock so that no gadget can use this udc until probe is done */
 	retval = usb_add_gadget_udc(dev->dev, &dev->gadget);
 	if (retval) {
@@ -2190,15 +2188,21 @@ static int gr_probe(struct platform_device *pdev)
 	}
 	dev->added = 1;
 
+	spin_lock(&dev->lock);
+
 	retval = gr_udc_init(dev);
-	if (retval)
+	if (retval) {
+		spin_unlock(&dev->lock);
 		goto out;
-
-	gr_dfs_create(dev);
+	}
 
 	/* Clear all interrupt enables that might be left on since last boot */
 	gr_disable_interrupts_and_pullup(dev);
 
+	spin_unlock(&dev->lock);
+
+	gr_dfs_create(dev);
+
 	retval = gr_request_irq(dev, dev->irq);
 	if (retval) {
 		dev_err(dev->dev, "Failed to request irq %d\n", dev->irq);
@@ -2227,8 +2231,6 @@ static int gr_probe(struct platform_device *pdev)
 		dev_info(dev->dev, "regs: %p, irq %d\n", dev->regs, dev->irq);
 
 out:
-	spin_unlock(&dev->lock);
-
 	if (retval)
 		gr_remove(pdev);
 
Signature · 1 line
2.20.1
#39 lore raw

Re: [PATCH 4.19 032/191] usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()

Hi!

Quoted 5 lines

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 9c1ed62ae0690dfe5d5e31d8f70e70a95cb48e52 ]

The driver may sleep while holding a spinlock.

True, but you can't just fix that by removing the locking.

drivers/usb/gadget/udc/gr_udc.c static int gr_probe(struct platform_device *pdev) · line 2185

Quoted 10 lines

+++ b/drivers/usb/gadget/udc/gr_udc.c

drivers/usb/gadget/udc/gr_udc.c +0 -2
@@ -2180,8 +2180,6 @@ static int gr_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	spin_lock(&dev->lock);
-
 	/* Inside lock so that no gadget can use this udc until probe is done */
 	retval = usb_add_gadget_udc(dev->dev, &dev->gadget);
 	if (retval) {

As this comment tries to explain. It is possible that the comment can just be removed, but it looks like the code needs to be rearranged so that rest of system does not see partly-initialized device.

Best regards,
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#40 lore raw

PATCH 33/191 usb: dwc2: Fix IN FIFO allocation

In reply to Greg Kroah-Hartman

From: John Keeping <[email protected]>

[ Upstream commit 644139f8b64d818f6345351455f14471510879a5 ]

On chips with fewer FIFOs than endpoints (for example RK3288 which has 9 endpoints, but only 6 which are cabable of input), the DPTXFSIZN registers above the FIFO count may return invalid values.

With logging added on startup, I see:

	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0

but:

	# cat /sys/kernel/debug/ff580000.usb/fifo
	Non-periodic FIFOs:
	RXFIFO: Size 275
	NPTXFIFO: Size 16, Start 0x00000113
	Periodic TXFIFOs:
		DPTXFIFO 1: Size 256, Start 0x00000123
		DPTXFIFO 2: Size 128, Start 0x00000223
		DPTXFIFO 3: Size 128, Start 0x000002a3
		DPTXFIFO 4: Size 64, Start 0x00000323
		DPTXFIFO 5: Size 64, Start 0x00000363
		DPTXFIFO 6: Size 32, Start 0x000003a3
		DPTXFIFO 7: Size 0, Start 0x000003e3
		DPTXFIFO 8: Size 0, Start 0x000003a3
		DPTXFIFO 9: Size 256, Start 0x00000123

so it seems that FIFO 9 is mirroring FIFO 1.

Fix the allocation by using the FIFO count instead of the endpoint count when selecting a FIFO for an endpoint.

---
 drivers/usb/dwc2/gadget.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/dwc2/gadget.c +2 -1
index f64d1cd08fb67..17f3e7b4d4fed 100644
@@ -3918,11 +3918,12 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	 * a unique tx-fifo even if it is non-periodic.
 	 */
 	if (dir_in && hsotg->dedicated_fifos) {
+		unsigned fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
 		u32 fifo_index = 0;
 		u32 fifo_size = UINT_MAX;
 
 		size = hs_ep->ep.maxpacket * hs_ep->mc;
-		for (i = 1; i < hsotg->num_of_eps; ++i) {
+		for (i = 1; i <= fifo_count; ++i) {
 			if (hsotg->fifo_map & (1 << i))
 				continue;
 			val = dwc2_readl(hsotg, DPTXFSIZN(i));
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 34/191 clocksource/drivers/bcm2835_timer: Fix memory leak of timer

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 2052d032c06761330bca4944bb7858b00960e868 ]

Currently when setup_irq fails the error exit path will leak the recently allocated timer structure. Originally the code would throw a panic but a later commit changed the behaviour to return via the err_iounmap path and hence we now have a memory leak. Fix this by adding a err_timer_free error path that kfree's timer.

Addresses-Coverity: ("Resource Leak")

Fixes 524a7f08983d ("clocksource/drivers/bcm2835_timer: Convert init function to return error")
---
 drivers/clocksource/bcm2835_timer.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/clocksource/bcm2835_timer.c +4 -1
index 60da2537bef93..1082dcef17d17 100644
@@ -134,7 +134,7 @@ static int __init bcm2835_timer_init(struct device_node *node)
 	ret = setup_irq(irq, &timer->act);
 	if (ret) {
 		pr_err("Can't set up timer IRQ\n");
-		goto err_iounmap;
+		goto err_timer_free;
 	}
 
 	clockevents_config_and_register(&timer->evt, freq, 0xf, 0xffffffff);
@@ -143,6 +143,9 @@ static int __init bcm2835_timer_init(struct device_node *node)
 
 	return 0;
 
+err_timer_free:
+	kfree(timer);
+
 err_iounmap:
 	iounmap(base);
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 35/191 kselftest: Minimise dependency of get_size on C library interfaces

In reply to Greg Kroah-Hartman

From: Siddhesh Poyarekar <[email protected]>

[ Upstream commit 6b64a650f0b2ae3940698f401732988699eecf7a ]

It was observed[1] on arm64 that __builtin_strlen led to an infinite loop in the get_size selftest. This is because __builtin_strlen (and other builtins) may sometimes result in a call to the C library function. The C library implementation of strlen uses an IFUNC resolver to load the most efficient strlen implementation for the underlying machine and hence has a PLT indirection even for static binaries. Because this binary avoids the C library startup routines, the PLT initialization never happens and hence the program gets stuck in an infinite loop.

On x86_64 the __builtin_strlen just happens to expand inline and avoid the call but that is not always guaranteed.

Further, while testing on x86_64 (Fedora 31), it was observed that the test also failed with a segfault inside write() because the generated code for the write function in glibc seems to access TLS before the syscall (probably due to the cancellation point check) and fails because TLS is not initialised.

To mitigate these problems, this patch reduces the interface with the C library to just the syscall function. The syscall function still sets errno on failure, which is undesirable but for now it only affects cases where syscalls fail.

[1] https://bugs.linaro.org/show_bug.cgi?id=5479

---
 tools/testing/selftests/size/get_size.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
tools/testing/selftests/size/get_size.c +18 -6
index d4b59ab979a09..f55943b6d1e2a 100644
@@ -12,23 +12,35 @@
  * own execution.  It also attempts to have as few dependencies
  * on kernel features as possible.
  *
- * It should be statically linked, with startup libs avoided.
- * It uses no library calls, and only the following 3 syscalls:
+ * It should be statically linked, with startup libs avoided.  It uses
+ * no library calls except the syscall() function for the following 3
+ * syscalls:
  *   sysinfo(), write(), and _exit()
  *
  * For output, it avoids printf (which in some C libraries
  * has large external dependencies) by  implementing it's own
  * number output and print routines, and using __builtin_strlen()
+ *
+ * The test may crash if any of the above syscalls fails because in some
+ * libc implementations (e.g. the GNU C Library) errno is saved in
+ * thread-local storage, which does not get initialized due to avoiding
+ * startup libs.
  */
 
 #include <sys/sysinfo.h>
 #include <unistd.h>
+#include <sys/syscall.h>
 
 #define STDOUT_FILENO 1
 
 static int print(const char *s)
 {
-	return write(STDOUT_FILENO, s, __builtin_strlen(s));
+	size_t len = 0;
+
+	while (s[len] != '\0')
+		len++;
+
+	return syscall(SYS_write, STDOUT_FILENO, s, len);
 }
 
 static inline char *num_to_str(unsigned long num, char *buf, int len)
@@ -80,12 +92,12 @@ void _start(void)
 	print("TAP version 13\n");
 	print("# Testing system size.\n");
 
-	ccode = sysinfo(&info);
+	ccode = syscall(SYS_sysinfo, &info);
 	if (ccode < 0) {
 		print("not ok 1");
 		print(test_name);
 		print(" ---\n reason: \"could not get sysinfo\"\n ...\n");
-		_exit(ccode);
+		syscall(SYS_exit, ccode);
 	}
 	print("ok 1");
 	print(test_name);
@@ -101,5 +113,5 @@ void _start(void)
 	print(" ...\n");
 	print("1..1\n");
 
-	_exit(0);
+	syscall(SYS_exit, 0);
 }
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 36/191 jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal

In reply to Greg Kroah-Hartman

From: Kai Li <[email protected]>

[ Upstream commit a09decff5c32060639a685581c380f51b14e1fc2 ]

If the journal is dirty when the filesystem is mounted, jbd2 will replay the journal but the journal superblock will not be updated by journal_reset() because JBD2_ABORT flag is still set (it was set in journal_init_common()). This is problematic because when a new transaction is then committed, it will be recorded in block 1 (journal->j_tail was set to 1 in journal_reset()). If unclean shutdown happens again before the journal superblock is updated, the new recorded transaction will not be replayed during the next mount (because of stale sb->s_start and sb->s_sequence values) which can lead to filesystem corruption.

Fixes 85e0c4e89c1b ("jbd2: if the journal is aborted then don't allow update of the log tail")
---
 fs/jbd2/journal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/jbd2/journal.c +5 -1
index 1a2339f2cb49b..568ca0ca0127c 100644
@@ -1701,6 +1701,11 @@ int jbd2_journal_load(journal_t *journal)
 		       journal->j_devname);
 		return -EFSCORRUPTED;
 	}
+	/*
+	 * clear JBD2_ABORT flag initialized in journal_init_common
+	 * here to update log tail information with the newest seq.
+	 */
+	journal->j_flags &= ~JBD2_ABORT;
 
 	/* OK, we've finished with the dynamic journal bits:
 	 * reinitialise the dynamic contents of the superblock in memory
@@ -1708,7 +1713,6 @@ int jbd2_journal_load(journal_t *journal)
 	if (journal_reset(journal))
 		goto recovery_error;
 
-	journal->j_flags &= ~JBD2_ABORT;
 	journal->j_flags |= JBD2_LOADED;
 	return 0;
 
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 37/191 x86/sysfb: Fix check for bad VRAM size

In reply to Greg Kroah-Hartman

From: Arvind Sankar <[email protected]>

[ Upstream commit dacc9092336be20b01642afe1a51720b31f60369 ]

When checking whether the reported lfb_size makes sense, the height
* stride result is page-aligned before seeing whether it exceeds the reported size.

This doesn't work if height * stride is not an exact number of pages. For example, as reported in the kernel bugzilla below, an 800x600x32 EFI framebuffer gets skipped because of this.

Move the PAGE_ALIGN to after the check vs size.

---
 arch/x86/kernel/sysfb_simplefb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/sysfb_simplefb.c +1 -1
index 85195d447a922..f3215346e47fd 100644
@@ -94,11 +94,11 @@ __init int create_simplefb(const struct screen_info *si,
 	if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
 		size <<= 16;
 	length = mode->height * mode->stride;
-	length = PAGE_ALIGN(length);
 	if (length > size) {
 		printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
 		return -EINVAL;
 	}
+	length = PAGE_ALIGN(length);
 
 	/* setup IORESOURCE_MEM as framebuffer memory */
 	memset(&res, 0, sizeof(res));
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 38/191 pwm: omap-dmtimer: Simplify error handling

In reply to Greg Kroah-Hartman

From: Uwe Kleine-König <[email protected]>

[ Upstream commit c4cf7aa57eb83b108d2d9c6c37c143388fee2a4d ]

Instead of doing error handling in the middle of ->probe(), move error handling and freeing the reference to timer to the end.

This fixes a resource leak as dm_timer wasn't freed when allocating *omap failed.

Implementation note: The put: label was never reached without a goto and ret being unequal to 0, so the removed return statement is fine.

Fixes 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers")
---
 drivers/pwm/pwm-omap-dmtimer.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)
drivers/pwm/pwm-omap-dmtimer.c +19 -9
index f45798679e3c0..2d585c101d52e 100644
@@ -301,15 +301,10 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 		goto put;
 	}
 
-put:
-	of_node_put(timer);
-	if (ret < 0)
-		return ret;
-
 	omap = devm_kzalloc(&pdev->dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
-		pdata->free(dm_timer);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_alloc_omap;
 	}
 
 	omap->pdata = pdata;
@@ -342,13 +337,28 @@ put:
 	ret = pwmchip_add(&omap->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM\n");
-		omap->pdata->free(omap->dm_timer);
-		return ret;
+		goto err_pwmchip_add;
 	}
 
+	of_node_put(timer);
+
 	platform_set_drvdata(pdev, omap);
 
 	return 0;
+
+err_pwmchip_add:
+
+	/*
+	 * *omap is allocated using devm_kzalloc,
+	 * so no free necessary here
+	 */
+err_alloc_omap:
+
+	pdata->free(dm_timer);
+put:
+	of_node_put(timer);
+
+	return ret;
 }
 
 static int pwm_omap_dmtimer_remove(struct platform_device *pdev)
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 39/191 s390/pci: Fix possible deadlock in recover_store()

In reply to Greg Kroah-Hartman

From: Niklas Schnelle <[email protected]>

[ Upstream commit 576c75e36c689bec6a940e807bae27291ab0c0de ]

With zpci_disable() working, lockdep detected a potential deadlock (lockdep output at the end).

The deadlock is between recovering a PCI function via the

/sys/bus/pci/devices/<dev>/recover

attribute vs powering it off via

/sys/bus/pci/slots/<slot>/power.

The fix is analogous to the changes in commit 0ee223b2e1f6 ("scsi: core:
Avoid that SCSI device removal through sysfs triggers a deadlock") that fixed a potential deadlock on removing a SCSI device via sysfs.

[  204.830107] ======================================================
[  204.830109] WARNING: possible circular locking dependency detected
[  204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G        W
[  204.830112] ------------------------------------------------------
[  204.830113] bash/1034 is trying to acquire lock:
[  204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8
[  204.830122]
               but task is already holding lock:
[  204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48
[  204.830128]
               which lock already depends on the new lock.
[  204.830129]
               the existing dependency chain (in reverse order) is:
[  204.830130]
               -> #1 (pci_rescan_remove_lock){+.+.}:
[  204.830134]        validate_chain+0x93a/0xd08
[  204.830136]        __lock_acquire+0x4ae/0x9d0
[  204.830137]        lock_acquire+0x114/0x280
[  204.830140]        __mutex_lock+0xa2/0x960
[  204.830142]        mutex_lock_nested+0x32/0x40
[  204.830145]        recover_store+0x4c/0xa8
[  204.830147]        kernfs_fop_write+0xe6/0x218
[  204.830151]        vfs_write+0xb0/0x1b8
[  204.830152]        ksys_write+0x6c/0xf8
[  204.830154]        system_call+0xd8/0x2d8
[  204.830155]
               -> #0 (kn->count#200){++++}:
[  204.830187]        check_noncircular+0x1e6/0x240
[  204.830189]        check_prev_add+0xfc/0xdb0
[  204.830190]        validate_chain+0x93a/0xd08
[  204.830192]        __lock_acquire+0x4ae/0x9d0
[  204.830193]        lock_acquire+0x114/0x280
[  204.830194]        __kernfs_remove.part.0+0x2e4/0x360
[  204.830196]        kernfs_remove_by_name_ns+0x5c/0xa8
[  204.830198]        remove_files.isra.0+0x4c/0x98
[  204.830199]        sysfs_remove_group+0x66/0xc8
[  204.830201]        sysfs_remove_groups+0x46/0x68
[  204.830204]        device_remove_attrs+0x52/0x90
[  204.830207]        device_del+0x182/0x418
[  204.830208]        pci_remove_bus_device+0x8a/0x130
[  204.830210]        pci_stop_and_remove_bus_device_locked+0x3a/0x48
[  204.830212]        disable_slot+0x68/0x100
[  204.830213]        power_write_file+0x7c/0x130
[  204.830215]        kernfs_fop_write+0xe6/0x218
[  204.830217]        vfs_write+0xb0/0x1b8
[  204.830218]        ksys_write+0x6c/0xf8
[  204.830220]        system_call+0xd8/0x2d8
[  204.830221]
               other info that might help us debug this:
[  204.830223]  Possible unsafe locking scenario:
[  204.830224]        CPU0                    CPU1
[  204.830225]        ----                    ----
[  204.830226]   lock(pci_rescan_remove_lock);
[  204.830227]                                lock(kn->count#200);
[  204.830229]                                lock(pci_rescan_remove_lock);
[  204.830231]   lock(kn->count#200);
[  204.830233]
                *** DEADLOCK ***
[  204.830234] 4 locks held by bash/1034:
[  204.830235]  #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8
[  204.830239]  #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218
[  204.830242]  #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218
[  204.830245]  #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48
[  204.830248]
               stack backtrace:
[  204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G        W         5.5.0-rc2-06072-gbc03ecc9a672 #6
[  204.830252] Hardware name: IBM 8561 T01 703 (LPAR)
[  204.830253] Call Trace:
[  204.830257]  [<00000000c05e10c0>] show_stack+0x88/0xf0
[  204.830260]  [<00000000c112dca4>] dump_stack+0xa4/0xe0
[  204.830261]  [<00000000c0694c06>] check_noncircular+0x1e6/0x240
[  204.830263]  [<00000000c0695bec>] check_prev_add+0xfc/0xdb0
[  204.830264]  [<00000000c06971da>] validate_chain+0x93a/0xd08
[  204.830266]  [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0
[  204.830267]  [<00000000c069867c>] lock_acquire+0x114/0x280
[  204.830269]  [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360
[  204.830270]  [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8
[  204.830272]  [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98
[  204.830274]  [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8
[  204.830276]  [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68
[  204.830278]  [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90
[  204.830280]  [<00000000c0e40382>] device_del+0x182/0x418
[  204.830281]  [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130
[  204.830283]  [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48
[  204.830285]  [<00000000c0de7190>] disable_slot+0x68/0x100
[  204.830286]  [<00000000c0de6514>] power_write_file+0x7c/0x130
[  204.830288]  [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218
[  204.830290]  [<00000000c08f3480>] vfs_write+0xb0/0x1b8
[  204.830291]  [<00000000c08f378c>] ksys_write+0x6c/0xf8
[  204.830293]  [<00000000c1154374>] system_call+0xd8/0x2d8
[  204.830294] INFO: lockdep is turned off.
---
 arch/s390/pci/pci_sysfs.c | 63 ++++++++++++++++++++++++++-------------
 1 file changed, 42 insertions(+), 21 deletions(-)
arch/s390/pci/pci_sysfs.c +42 -21
index 430c14b006d17..0e11fc023fe78 100644
@@ -13,6 +13,8 @@
 #include <linux/stat.h>
 #include <linux/pci.h>
 
+#include "../../../drivers/pci/pci.h"
+
 #include <asm/sclp.h>
 
 #define zpci_attr(name, fmt, member)					\
@@ -40,31 +42,50 @@ zpci_attr(segment3, "0x%02x\n", pfip[3]);
 static ssize_t recover_store(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
+	struct kernfs_node *kn;
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct zpci_dev *zdev = to_zpci(pdev);
-	int ret;
-
-	if (!device_remove_file_self(dev, attr))
-		return count;
-
+	int ret = 0;
+
+	/* Can't use device_remove_self() here as that would lead us to lock
+	 * the pci_rescan_remove_lock while holding the device' kernfs lock.
+	 * This would create a possible deadlock with disable_slot() which is
+	 * not directly protected by the device' kernfs lock but takes it
+	 * during the device removal which happens under
+	 * pci_rescan_remove_lock.
+	 *
+	 * This is analogous to sdev_store_delete() in
+	 * drivers/scsi/scsi_sysfs.c
+	 */
+	kn = sysfs_break_active_protection(&dev->kobj, &attr->attr);
+	WARN_ON_ONCE(!kn);
+	/* device_remove_file() serializes concurrent calls ignoring all but
+	 * the first
+	 */
+	device_remove_file(dev, attr);
+
+	/* A concurrent call to recover_store() may slip between
+	 * sysfs_break_active_protection() and the sysfs file removal.
+	 * Once it unblocks from pci_lock_rescan_remove() the original pdev
+	 * will already be removed.
+	 */
 	pci_lock_rescan_remove();
-	pci_stop_and_remove_bus_device(pdev);
-	ret = zpci_disable_device(zdev);
-	if (ret)
-		goto error;
-
-	ret = zpci_enable_device(zdev);
-	if (ret)
-		goto error;
-
-	pci_rescan_bus(zdev->bus);
+	if (pci_dev_is_added(pdev)) {
+		pci_stop_and_remove_bus_device(pdev);
+		ret = zpci_disable_device(zdev);
+		if (ret)
+			goto out;
+
+		ret = zpci_enable_device(zdev);
+		if (ret)
+			goto out;
+		pci_rescan_bus(zdev->bus);
+	}
+out:
 	pci_unlock_rescan_remove();
-
-	return count;
-
-error:
-	pci_unlock_rescan_remove();
-	return ret;
+	if (kn)
+		sysfs_unbreak_active_protection(kn);
+	return ret ? ret : count;
 }
 static DEVICE_ATTR_WO(recover);
 
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 40/191 powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov()

In reply to Greg Kroah-Hartman

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 965c94f309be58fbcc6c8d3e4f123376c5970d79 ]

An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before the pci_dev for the VF is created. We need to set the pe->pdev pointer at some point after the pci_dev is created. Currently we do that in:

pcibios_bus_add_device()

	pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup)
		/* fixup is done here */
		pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup)

The fixup needs to be done before setting up DMA for for the VF's PE, but there's no real reason to delay it until this point. Move the fixup into pnv_pci_ioda_fixup_iov() so the ordering is:

	pcibios_add_device()
		pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov)

	pcibios_bus_add_device()
		...

This isn't strictly required, but it's a slightly more logical place to do the fixup and it simplifies pnv_pci_dma_dev_setup().

---
 arch/powerpc/platforms/powernv/pci-ioda.c | 29 +++++++++++++++++++----
 arch/powerpc/platforms/powernv/pci.c      | 14 -----------
 2 files changed, 25 insertions(+), 18 deletions(-)
arch/powerpc/platforms/powernv/pci-ioda.c +25 -4
index 28adfe4dd04c5..ecd211c5f24a5 100644
@@ -3015,9 +3015,6 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 	struct pci_dn *pdn;
 	int mul, total_vfs;
 
-	if (!pdev->is_physfn || pci_dev_is_added(pdev))
-		return;
-
 	pdn = pci_get_pdn(pdev);
 	pdn->vfs_expanded = 0;
 	pdn->m64_single_mode = false;
@@ -3092,6 +3089,30 @@ truncate_iov:
 		res->end = res->start - 1;
 	}
 }
+
+static void pnv_pci_ioda_fixup_iov(struct pci_dev *pdev)
+{
+	if (WARN_ON(pci_dev_is_added(pdev)))
+		return;
+
+	if (pdev->is_virtfn) {
+		struct pnv_ioda_pe *pe = pnv_ioda_get_pe(pdev);
+
+		/*
+		 * VF PEs are single-device PEs so their pdev pointer needs to
+		 * be set. The pdev doesn't exist when the PE is allocated (in
+		 * (pcibios_sriov_enable()) so we fix it up here.
+		 */
+		pe->pdev = pdev;
+		WARN_ON(!(pe->flags & PNV_IODA_PE_VF));
+	} else if (pdev->is_physfn) {
+		/*
+		 * For PFs adjust their allocated IOV resources to match what
+		 * the PHB can support using it's M64 BAR table.
+		 */
+		pnv_pci_ioda_fixup_iov_resources(pdev);
+	}
+}
 #endif /* CONFIG_PCI_IOV */
 
 static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
@@ -3985,7 +4006,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	ppc_md.pcibios_default_alignment = pnv_pci_default_alignment;
 
 #ifdef CONFIG_PCI_IOV
-	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
+	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov;
 	ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
 	ppc_md.pcibios_sriov_enable = pnv_pcibios_sriov_enable;
 	ppc_md.pcibios_sriov_disable = pnv_pcibios_sriov_disable;
arch/powerpc/platforms/powernv/pci.c +0 -14
index aa95b8e0f66ad..b6fa900af5da5 100644
@@ -820,20 +820,6 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
-#ifdef CONFIG_PCI_IOV
-	struct pnv_ioda_pe *pe;
-
-	/* Fix the VF pdn PE number */
-	if (pdev->is_virtfn) {
-		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-			if (pe->rid == ((pdev->bus->number << 8) |
-			    (pdev->devfn & 0xff))) {
-				pe->pdev = pdev;
-				break;
-			}
-		}
-	}
-#endif /* CONFIG_PCI_IOV */
 
 	if (phb && phb->dma_dev_setup)
 		phb->dma_dev_setup(phb, pdev);
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 41/191 tracing: Fix tracing_stat return values in error handling paths

In reply to Greg Kroah-Hartman

From: Luis Henriques <[email protected]>

[ Upstream commit afccc00f75bbbee4e4ae833a96c2d29a7259c693 ]

tracing_stat_init() was always returning '0', even on the error paths. It now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails to created the 'trace_stat' debugfs directory.

Fixes ed6f1c996bfe4 ("tracing: Check return value of tracing_init_dentry()")
[ Pulled from the archeological digging of my INBOX ]
---
 kernel/trace/trace_stat.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
kernel/trace/trace_stat.c +8 -4
index 75bf1bcb4a8a5..bf68af63538b4 100644
@@ -278,18 +278,22 @@ static int tracing_stat_init(void)
 
 	d_tracing = tracing_init_dentry();
 	if (IS_ERR(d_tracing))
-		return 0;
+		return -ENODEV;
 
 	stat_dir = tracefs_create_dir("trace_stat", d_tracing);
-	if (!stat_dir)
+	if (!stat_dir) {
 		pr_warn("Could not create tracefs 'trace_stat' entry\n");
+		return -ENOMEM;
+	}
 	return 0;
 }
 
 static int init_stat_file(struct stat_session *session)
 {
-	if (!stat_dir && tracing_stat_init())
-		return -ENODEV;
+	int ret;
+
+	if (!stat_dir && (ret = tracing_stat_init()))
+		return ret;
 
 	session->file = tracefs_create_file(session->ts->name, 0644,
 					    stat_dir,
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 42/191 tracing: Fix very unlikely race of registering two stat tracers

In reply to Greg Kroah-Hartman

From: Steven Rostedt (VMware) <[email protected]>

[ Upstream commit dfb6cd1e654315168e36d947471bd2a0ccd834ae ]

Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files).

But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function.

Fixes 002bb86d8d42f ("tracing/ftrace: separate events tracing and stats tracing engine")
---
 kernel/trace/trace_stat.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
kernel/trace/trace_stat.c +9 -10
index bf68af63538b4..92b76f9e25edd 100644
@@ -306,7 +306,7 @@ static int init_stat_file(struct stat_session *session)
 int register_stat_tracer(struct tracer_stat *trace)
 {
 	struct stat_session *session, *node;
-	int ret;
+	int ret = -EINVAL;
 
 	if (!trace)
 		return -EINVAL;
@@ -317,17 +317,15 @@ int register_stat_tracer(struct tracer_stat *trace)
 	/* Already registered? */
 	mutex_lock(&all_stat_sessions_mutex);
 	list_for_each_entry(node, &all_stat_sessions, session_list) {
-		if (node->ts == trace) {
-			mutex_unlock(&all_stat_sessions_mutex);
-			return -EINVAL;
-		}
+		if (node->ts == trace)
+			goto out;
 	}
-	mutex_unlock(&all_stat_sessions_mutex);
 
+	ret = -ENOMEM;
 	/* Init the session */
 	session = kzalloc(sizeof(*session), GFP_KERNEL);
 	if (!session)
-		return -ENOMEM;
+		goto out;
 
 	session->ts = trace;
 	INIT_LIST_HEAD(&session->session_list);
@@ -336,15 +334,16 @@ int register_stat_tracer(struct tracer_stat *trace)
 	ret = init_stat_file(session);
 	if (ret) {
 		destroy_session(session);
-		return ret;
+		goto out;
 	}
 
+	ret = 0;
 	/* Register */
-	mutex_lock(&all_stat_sessions_mutex);
 	list_add_tail(&session->session_list, &all_stat_sessions);
+ out:
 	mutex_unlock(&all_stat_sessions_mutex);
 
-	return 0;
+	return ret;
 }
 
 void unregister_stat_tracer(struct tracer_stat *trace)
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 43/191 ARM: 8952/1: Disable kmemleak on XIP kernels

In reply to Greg Kroah-Hartman

From: Vincenzo Frascino <[email protected]>

[ Upstream commit bc420c6ceefbb86cbbc8c00061bd779c17fa6997 ]

Kmemleak relies on specific symbols to register the read only data during init (e.g. __start_ro_after_init).
Trying to build an XIP kernel on arm results in the linking error reported below because when this option is selected read only data after init are not allowed since .data is read only (.rodata).

arm-linux-gnueabihf-ld: mm/kmemleak.o: in function `kmemleak_init':
kmemleak.c:(.init.text+0x148): undefined reference to `__end_ro_after_init'
arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x14c):
undefined reference to `__end_ro_after_init'
arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x150):
undefined reference to `__start_ro_after_init'
arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x156):
undefined reference to `__start_ro_after_init'
arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x162):
undefined reference to `__start_ro_after_init'
arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x16a):
undefined reference to `__start_ro_after_init'
linux/Makefile:1078: recipe for target 'vmlinux' failed

Fix the issue enabling kmemleak only on non XIP kernels.

---
 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig +1 -1
index 185e552f14610..9f03befdfbf06 100644
@@ -61,7 +61,7 @@ config ARM
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 44/191 ext4, jbd2: ensure panic when aborting with zero errno

In reply to Greg Kroah-Hartman

From: zhangyi (F) <[email protected]>

[ Upstream commit 51f57b01e4a3c7d7bdceffd84de35144e8c538e7 ]

JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2 aborted, and then __ext4_abort() and ext4_handle_error() can invoke panic if ERRORS_PANIC is specified. But if the journal has been aborted with zero errno, jbd2_journal_abort() didn't set this flag so we can no longer panic. Fix this by always record the proper errno in the journal superblock.

Fixes 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
---
 fs/jbd2/checkpoint.c |  2 +-
 fs/jbd2/journal.c    | 15 ++++-----------
 2 files changed, 5 insertions(+), 12 deletions(-)
fs/jbd2/checkpoint.c +1 -1
index 26f8d7e46462e..66409cbd3ed54 100644
@@ -165,7 +165,7 @@ void __jbd2_log_wait_for_space(journal_t *journal)
 				       "journal space in %s\n", __func__,
 				       journal->j_devname);
 				WARN_ON(1);
-				jbd2_journal_abort(journal, 0);
+				jbd2_journal_abort(journal, -EIO);
 			}
 			write_lock(&journal->j_state_lock);
 		} else {
fs/jbd2/journal.c +4 -11
index 568ca0ca0127c..1a96287f92647 100644
@@ -2142,12 +2142,10 @@ static void __journal_abort_soft (journal_t *journal, int errno)
 
 	__jbd2_journal_abort_hard(journal);
 
-	if (errno) {
-		jbd2_journal_update_sb_errno(journal);
-		write_lock(&journal->j_state_lock);
-		journal->j_flags |= JBD2_REC_ERR;
-		write_unlock(&journal->j_state_lock);
-	}
+	jbd2_journal_update_sb_errno(journal);
+	write_lock(&journal->j_state_lock);
+	journal->j_flags |= JBD2_REC_ERR;
+	write_unlock(&journal->j_state_lock);
 }
 
 /**
@@ -2189,11 +2187,6 @@ static void __journal_abort_soft (journal_t *journal, int errno)
  * failure to disk.  ext3_error, for example, now uses this
  * functionality.
  *
- * Errors which originate from within the journaling layer will NOT
- * supply an errno; a null errno implies that absolutely no further
- * writes are done to the journal (unless there are any already in
- * progress).
- *
  */
 
 void jbd2_journal_abort(journal_t *journal, int errno)
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 45/191 ath10k: Correct the DMA direction for management tx buffers

In reply to Greg Kroah-Hartman

From: Rakesh Pillai <[email protected]>

[ Upstream commit 6ba8b3b6bd772f575f7736c8fd893c6981fcce16 ]

The management packets, send to firmware via WMI, are mapped using the direction DMA_TO_DEVICE. Currently in case of wmi cleanup, these buffers are being unmapped using an incorrect DMA direction. This can cause unwanted behavior when the host driver is handling a restart of the wlan firmware.

We might see a trace like below

[<ffffff8008098b18>] __dma_inv_area+0x28/0x58
[<ffffff8001176734>] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core]
[<ffffff80088c7c50>] idr_for_each+0x78/0xe4
[<ffffff80011766a4>] ath10k_wmi_detach+0x4c/0x7c [ath10k_core]
[<ffffff8001163d7c>] ath10k_core_stop+0x58/0x68 [ath10k_core]
[<ffffff800114fb74>] ath10k_halt+0xec/0x13c [ath10k_core]
[<ffffff8001165110>] ath10k_core_restart+0x11c/0x1a8 [ath10k_core]
[<ffffff80080c36bc>] process_one_work+0x16c/0x31c

Fix the incorrect DMA direction during the wmi
management tx buffer cleanup.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes dc405152bb6 ("ath10k: handle mgmt tx completion event")
---
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/wmi.c +1 -1
index 0f6ff7a78e49d..3372dfa0deccf 100644
@@ -9193,7 +9193,7 @@ static int ath10k_wmi_mgmt_tx_clean_up_pending(int msdu_id, void *ptr,
 
 	msdu = pkt_addr->vaddr;
 	dma_unmap_single(ar->dev, pkt_addr->paddr,
-			 msdu->len, DMA_FROM_DEVICE);
+			 msdu->len, DMA_TO_DEVICE);
 	ieee80211_free_txskb(ar->hw, msdu);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 46/191 drm/amd/display: Retrain dongles when SINK_COUNT becomes non-zero

In reply to Greg Kroah-Hartman

From: Harry Wentland <[email protected]>

[ Upstream commit 3eb6d7aca53d81ce888624f09cd44dc0302161e8 ]

[WHY]
Two years ago the patch referenced by the Fixes tag stopped running dp_verify_link_cap_with_retries during DP detection when the reason for the detection was a short-pulse interrupt. This effectively meant that we were no longer doing the verify_link_cap training on active dongles when their SINK_COUNT changed from 0 to 1.

A year ago this was partly remedied with:
commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle")

This made sure that we trained the dongle on initial hotplug (without connected downstream devices).

This is all fine and dandy if it weren't for the fact that there are some dongles on the market that don't like link training when SINK_COUNT is 0 These dongles will in fact indicate a SINK_COUNT of 0 immediately after hotplug, even when a downstream device is connected, and then trigger a shortpulse interrupt indicating a SINK_COUNT change to 1.

In order to play nicely we will need our policy to not link train an active DP dongle when SINK_COUNT is 0 but ensure we train it when the SINK_COUNT changes to 1.

[HOW]
Call dp_verify_link_cap_with_retries on detection even when the detection is triggered from a short pulse interrupt.

With this change we can also revert this commit which we'll do in a separate follow-up change:
commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle")

Fixes 0301ccbaf67d ("drm/amd/display: DP Compliance 400.1.1 failure")
Cc Wenjing Liu <[email protected]>
Cc Hersen Wu <[email protected]>
Cc Eric Yang <[email protected]>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +1 -2
index 2f42964fb9f45..3abc0294c05f5 100644
@@ -780,8 +780,7 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
 			same_edid = is_same_edid(&prev_sink->dc_edid, &sink->dc_edid);
 
 		if (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT &&
-			sink_caps.transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX &&
-			reason != DETECT_REASON_HPDRX) {
+			sink_caps.transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) {
 			/*
 			 * TODO debug why Dell 2413 doesn't like
 			 *  two link trainings
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 47/191 nbd: add a flush_workqueue in nbd_start_device

In reply to Greg Kroah-Hartman

From: Sun Ke <[email protected]>

[ Upstream commit 5c0dd228b5fc30a3b732c7ae2657e0161ec7ed80 ]

When kzalloc fail, may cause trying to destroy the workqueue from inside the workqueue.

If num_connections is m (2 < m), and NO.1 ~ NO.n (1 < n < m) kzalloc are successful. The NO.(n + 1) failed. Then, nbd_start_device will return ENOMEM to nbd_start_device_ioctl, and nbd_start_device_ioctl will return immediately without running flush_workqueue. However, we still have n recv threads. If nbd_release run first, recv threads may have to drop the last config_refs and try to destroy the workqueue from inside the workqueue.

To fix it, add a flush_workqueue in nbd_start_device.

Fixes e9e006f5fcf2 ("nbd: fix max number of supported devs")
---
 drivers/block/nbd.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/block/nbd.c +10 -0
index b9d321bdaa8a7..226103af30f05 100644
@@ -1216,6 +1216,16 @@ static int nbd_start_device(struct nbd_device *nbd)
 		args = kzalloc(sizeof(*args), GFP_KERNEL);
 		if (!args) {
 			sock_shutdown(nbd);
+			/*
+			 * If num_connections is m (2 < m),
+			 * and NO.1 ~ NO.n(1 < n < m) kzallocs are successful.
+			 * But NO.(n + 1) failed. We still have n recv threads.
+			 * So, add flush_workqueue here to prevent recv threads
+			 * dropping the last config_refs and trying to destroy
+			 * the workqueue from inside the workqueue.
+			 */
+			if (i)
+				flush_workqueue(nbd->recv_workq);
 			return -ENOMEM;
 		}
 		sk_set_memalloc(config->socks[i]->sock->sk);
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 48/191 KVM: s390: ENOTSUPP -> EOPNOTSUPP fixups

In reply to Greg Kroah-Hartman

From: Christian Borntraeger <[email protected]>

[ Upstream commit c611990844c28c61ca4b35ff69d3a2ae95ccd486 ]

There is no ENOTSUPP for userspace.

Fixes 519783935451 ("KVM: s390: introduce ais mode modify function")
Fixes 2c1a48f2e5ed ("KVM: S390: add new group for flic")
---
 arch/s390/kvm/interrupt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/s390/kvm/interrupt.c +3 -3
index 05ea466b9e403..3515f2b55eb9e 100644
@@ -2109,7 +2109,7 @@ static int flic_ais_mode_get_all(struct kvm *kvm, struct kvm_device_attr *attr)
 		return -EINVAL;
 
 	if (!test_kvm_facility(kvm, 72))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mutex_lock(&fi->ais_lock);
 	ais.simm = fi->simm;
@@ -2412,7 +2412,7 @@ static int modify_ais_mode(struct kvm *kvm, struct kvm_device_attr *attr)
 	int ret = 0;
 
 	if (!test_kvm_facility(kvm, 72))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req)))
 		return -EFAULT;
@@ -2492,7 +2492,7 @@ static int flic_ais_mode_set_all(struct kvm *kvm, struct kvm_device_attr *attr)
 	struct kvm_s390_ais_all ais;
 
 	if (!test_kvm_facility(kvm, 72))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (copy_from_user(&ais, (void __user *)attr->addr, sizeof(ais)))
 		return -EFAULT;
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 49/191 kconfig: fix broken dependency in randconfig-generated .config

In reply to Greg Kroah-Hartman

From: Masahiro Yamada <[email protected]>

[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ]

Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5) produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y, which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.

This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the value of CONFIG_EFI is calculated.

When this happens, the has_changed flag should be set.

Currently, it takes the result from the last iteration. It should accumulate all the results of the loop.

Fixes 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig")
---
 scripts/kconfig/confdata.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/confdata.c +1 -1
index 0dde19cf74865..2caf5fac102a2 100644
@@ -1314,7 +1314,7 @@ bool conf_set_all_new_symbols(enum conf_def_mode mode)
 
 		sym_calc_value(csym);
 		if (mode == def_random)
-			has_changed = randomize_choice_values(csym);
+			has_changed |= randomize_choice_values(csym);
 		else {
 			set_all_choice_values(csym);
 			has_changed = true;
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 50/191 clk: qcom: rcg2: Dont crash if our parent cant be found; return an error

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ]

When I got my clock parenting slightly wrong I ended up with a crash that looked like this:

  Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000000
  ...
  pc : clk_hw_get_rate+0x14/0x44
  ...
  Call trace:
   clk_hw_get_rate+0x14/0x44
   _freq_tbl_determine_rate+0x94/0xfc
   clk_rcg2_determine_rate+0x2c/0x38
   clk_core_determine_round_nolock+0x4c/0x88
   clk_core_round_rate_nolock+0x6c/0xa8
   clk_core_round_rate_nolock+0x9c/0xa8
   clk_core_set_rate_nolock+0x70/0x180
   clk_set_rate+0x3c/0x6c
   of_clk_set_defaults+0x254/0x360
   platform_drv_probe+0x28/0xb0
   really_probe+0x120/0x2dc
   driver_probe_device+0x64/0xfc
   device_driver_attach+0x4c/0x6c
   __driver_attach+0xac/0xc0
   bus_for_each_dev+0x84/0xcc
   driver_attach+0x2c/0x38
   bus_add_driver+0xfc/0x1d0
   driver_register+0x64/0xf8
   __platform_driver_register+0x4c/0x58
   msm_drm_register+0x5c/0x60
   ...

It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash.

---
 drivers/clk/qcom/clk-rcg2.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/clk/qcom/clk-rcg2.c +3 -0
index 51b2388d80ac9..ee693e15d9ebc 100644
@@ -203,6 +203,9 @@ static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
 
 	clk_flags = clk_hw_get_flags(hw);
 	p = clk_hw_get_parent_by_index(hw, index);
+	if (!p)
+		return -EINVAL;
+
 	if (clk_flags & CLK_SET_RATE_PARENT) {
 		rate = f->freq;
 		if (f->pre_div) {
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 51/191 drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table

In reply to Greg Kroah-Hartman

From: yu kuai <[email protected]>

[ Upstream commit bae028e3e521e8cb8caf2cc16a455ce4c55f2332 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c: In function 'amdgpu_atombios_get_connector_info_from_object_table':
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:26: warning: variable 'grph_obj_num' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:13: warning: variable 'grph_obj_id' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:37: warning: variable 'con_obj_type' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:24: warning: variable 'con_obj_num' set but not used [-Wunused-but-set-variable]

They are never used, so can be removed.

Fixes d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c +2 -17
index bf872f694f509..d1fbaea91f580 100644
@@ -337,17 +337,9 @@ bool amdgpu_atombios_get_connector_info_from_object_table(struct amdgpu_device *
 		path_size += le16_to_cpu(path->usSize);
 
 		if (device_support & le16_to_cpu(path->usDeviceTag)) {
-			uint8_t con_obj_id, con_obj_num, con_obj_type;
-
-			con_obj_id =
+			uint8_t con_obj_id =
 			    (le16_to_cpu(path->usConnObjectId) & OBJECT_ID_MASK)
 			    >> OBJECT_ID_SHIFT;
-			con_obj_num =
-			    (le16_to_cpu(path->usConnObjectId) & ENUM_ID_MASK)
-			    >> ENUM_ID_SHIFT;
-			con_obj_type =
-			    (le16_to_cpu(path->usConnObjectId) &
-			     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
 
 			/* Skip TV/CV support */
 			if ((le16_to_cpu(path->usDeviceTag) ==
@@ -372,14 +364,7 @@ bool amdgpu_atombios_get_connector_info_from_object_table(struct amdgpu_device *
 			router.ddc_valid = false;
 			router.cd_valid = false;
 			for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
-				uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
-
-				grph_obj_id =
-				    (le16_to_cpu(path->usGraphicObjIds[j]) &
-				     OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
-				grph_obj_num =
-				    (le16_to_cpu(path->usGraphicObjIds[j]) &
-				     ENUM_ID_MASK) >> ENUM_ID_SHIFT;
+				uint8_t grph_obj_type=
 				grph_obj_type =
 				    (le16_to_cpu(path->usGraphicObjIds[j]) &
 				     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 52/191 drm/amdgpu: Ensure ret is always initialized when using SOC15_WAIT_ON_RREG

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit a63141e31764f8daf3f29e8e2d450dcf9199d1c8 ]

Commit b0f3cd3191cd ("drm/amdgpu: remove unnecessary JPEG2.0 code from VCN2.0") introduced a new clang warning in the vcn_v2_0_stop function:

../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: warning: variable 'r' is used uninitialized whenever 'while' loop exits because its condition is false [-Wsometimes-uninitialized]

        SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note:
expanded from macro 'SOC15_WAIT_ON_RREG'
                while ((tmp_ & (mask)) != (expected_value)) {   \
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1083:6: note: uninitialized use
occurs here
        if (r)
            ^
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: note: remove the
condition if it is always true
        SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r);
        ^
../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note:
expanded from macro 'SOC15_WAIT_ON_RREG'
                while ((tmp_ & (mask)) != (expected_value)) {   \
                       ^
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1072:7: note: initialize the
variable 'r' to silence this warning
        int r;
             ^
              = 0

1 warning generated.

To prevent warnings like this from happening in the future, make the SOC15_WAIT_ON_RREG macro initialize its ret variable before the while loop that can time out. This macro's return value is always checked so it should set ret in both the success and fail path.

---
 drivers/gpu/drm/amd/amdgpu/soc15_common.h | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/soc15_common.h +1 -0
index 0942f492d2e19..9d444f7fdfcdd 100644
@@ -51,6 +51,7 @@
 	do {							\
 		uint32_t tmp_ = RREG32(adev->reg_offset[ip##_HWIP][inst][reg##_BASE_IDX] + reg); \
 		uint32_t loop = adev->usec_timeout;		\
+		ret = 0;					\
 		while ((tmp_ & (mask)) != (expected_value)) {	\
 			udelay(2);				\
 			tmp_ = RREG32(adev->reg_offset[ip##_HWIP][inst][reg##_BASE_IDX] + reg); \
Signature · 1 line
2.20.1
author maintainer
#60 lore raw

PATCH 53/191 regulator: rk808: Lower log level on optional GPIOs being not available

In reply to Greg Kroah-Hartman

From: Miquel Raynal <[email protected]>

[ Upstream commit b8a039d37792067c1a380dc710361905724b9b2f ]

RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS (Dynamic Voltage Scaling). These GPIOs are entirely optional but a dev_warn() appeared when cleaning this driver to use a more up-to-date gpiod API. At least reduce the log level to 'info' as it is totally fine to not populate these GPIO on a hardware design.

This change is trivial but it is worth not polluting the logs during bringup phase by having real warnings and errors sorted out correctly.

Fixes a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API")
---
 drivers/regulator/rk808-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/rk808-regulator.c +1 -1
index 213b68743cc89..92498ac503035 100644
@@ -714,7 +714,7 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
 		}
 
 		if (!pdata->dvs_gpio[i]) {
-			dev_warn(dev, "there is no dvs%d gpio\n", i);
+			dev_info(dev, "there is no dvs%d gpio\n", i);
 			continue;
 		}
 
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 54/191 net/wan/fsl_ucc_hdlc: reject muram offsets above 64K

In reply to Greg Kroah-Hartman

From: Rasmus Villemoes <[email protected]>

[ Upstream commit 148587a59f6b85831695e0497d9dd1af5f0495af ]

Qiang Zhao points out that these offsets get written to 16-bit registers, and there are some QE platforms with more than 64K muram. So it is possible that qe_muram_alloc() gives us an allocation that can't actually be used by the hardware, so detect and reject that.

---
 drivers/net/wan/fsl_ucc_hdlc.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/wan/fsl_ucc_hdlc.c +5 -0
index daeab33f623e7..9ab04ef532f34 100644
@@ -242,6 +242,11 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 		ret = -ENOMEM;
 		goto free_riptr;
 	}
+	if (riptr != (u16)riptr || tiptr != (u16)tiptr) {
+		dev_err(priv->dev, "MURAM allocation out of addressable range\n");
+		ret = -ENOMEM;
+		goto free_tiptr;
+	}
 
 	/* Set RIPTR, TIPTR */
 	iowrite16be(riptr, &priv->ucc_pram->riptr);
Signature · 1 line
2.20.1
author maintainer
#62 lore raw

PATCH 55/191 NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().

In reply to Greg Kroah-Hartman

From: Mao Wenan <[email protected]>

[ Upstream commit 718eae277e62a26e5862eb72a830b5e0fe37b04a ]

Convert cpu_to_le16(le16_to_cpu(frame->datalen) + len) to use le16_add_cpu(), which is more concise and does the same thing.

---
 drivers/nfc/port100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nfc/port100.c +1 -1
index 60ae382f50da9..06bb226c62ef4 100644
@@ -574,7 +574,7 @@ static void port100_tx_update_payload_len(void *_frame, int len)
 {
 	struct port100_frame *frame = _frame;
 
-	frame->datalen = cpu_to_le16(le16_to_cpu(frame->datalen) + len);
+	le16_add_cpu(&frame->datalen, len);
 }
 
 static bool port100_rx_frame_is_valid(void *_frame)
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 56/191 selinux: fall back to ref-walk if audit is required

In reply to Greg Kroah-Hartman

From: Stephen Smalley <[email protected]>

[ Upstream commit 0188d5c025ca8fe756ba3193bd7d150139af5a88 ]

commit bda0be7ad994 ("security: make inode_follow_link RCU-walk aware") passed down the rcu flag to the SELinux AVC, but failed to adjust the test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY. Previously, we only returned -ECHILD if generating an audit record with LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission. Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined equivalent in selinux_inode_permission() immediately after we determine that audit is required, and always fall back to ref-walk in this case.

Fixes bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
---
 security/selinux/avc.c         | 24 +++++-------------------
 security/selinux/hooks.c       | 11 +++++++----
 security/selinux/include/avc.h |  8 +++++---
 3 files changed, 17 insertions(+), 26 deletions(-)
security/selinux/avc.c +5 -19
index 5de18a6d5c3f0..0622cae510461 100644
@@ -496,7 +496,7 @@ static inline int avc_xperms_audit(struct selinux_state *state,
 	if (likely(!audited))
 		return 0;
 	return slow_avc_audit(state, ssid, tsid, tclass, requested,
-			audited, denied, result, ad, 0);
+			audited, denied, result, ad);
 }
 
 static void avc_node_free(struct rcu_head *rhead)
@@ -766,8 +766,7 @@ static void avc_audit_post_callback(struct audit_buffer *ab, void *a)
 noinline int slow_avc_audit(struct selinux_state *state,
 			    u32 ssid, u32 tsid, u16 tclass,
 			    u32 requested, u32 audited, u32 denied, int result,
-			    struct common_audit_data *a,
-			    unsigned int flags)
+			    struct common_audit_data *a)
 {
 	struct common_audit_data stack_data;
 	struct selinux_audit_data sad;
@@ -777,17 +776,6 @@ noinline int slow_avc_audit(struct selinux_state *state,
 		a->type = LSM_AUDIT_DATA_NONE;
 	}
 
-	/*
-	 * When in a RCU walk do the audit on the RCU retry.  This is because
-	 * the collection of the dname in an inode audit message is not RCU
-	 * safe.  Note this may drop some audits when the situation changes
-	 * during retry. However this is logically just as if the operation
-	 * happened a little later.
-	 */
-	if ((a->type == LSM_AUDIT_DATA_INODE) &&
-	    (flags & MAY_NOT_BLOCK))
-		return -ECHILD;
-
 	sad.tclass = tclass;
 	sad.requested = requested;
 	sad.ssid = ssid;
@@ -860,16 +848,14 @@ static int avc_update_node(struct selinux_avc *avc,
 	/*
 	 * If we are in a non-blocking code path, e.g. VFS RCU walk,
 	 * then we must not add permissions to a cache entry
-	 * because we cannot safely audit the denial.  Otherwise,
+	 * because we will not audit the denial.  Otherwise,
 	 * during the subsequent blocking retry (e.g. VFS ref walk), we
 	 * will find the permissions already granted in the cache entry
 	 * and won't audit anything at all, leading to silent denials in
 	 * permissive mode that only appear when in enforcing mode.
 	 *
-	 * See the corresponding handling in slow_avc_audit(), and the
-	 * logic in selinux_inode_follow_link and selinux_inode_permission
-	 * for the VFS MAY_NOT_BLOCK flag, which is transliterated into
-	 * AVC_NONBLOCKING for avc_has_perm_noaudit().
+	 * See the corresponding handling of MAY_NOT_BLOCK in avc_audit()
+	 * and selinux_inode_permission().
 	 */
 	if (flags & AVC_NONBLOCKING)
 		return 0;
security/selinux/hooks.c +7 -4
index 040c843968dc6..c574285966f9d 100644
@@ -3171,8 +3171,7 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct inode *inode,
 
 static noinline int audit_inode_permission(struct inode *inode,
 					   u32 perms, u32 audited, u32 denied,
-					   int result,
-					   unsigned flags)
+					   int result)
 {
 	struct common_audit_data ad;
 	struct inode_security_struct *isec = inode->i_security;
@@ -3183,7 +3182,7 @@ static noinline int audit_inode_permission(struct inode *inode,
 
 	rc = slow_avc_audit(&selinux_state,
 			    current_sid(), isec->sid, isec->sclass, perms,
-			    audited, denied, result, &ad, flags);
+			    audited, denied, result, &ad);
 	if (rc)
 		return rc;
 	return 0;
@@ -3230,7 +3229,11 @@ static int selinux_inode_permission(struct inode *inode, int mask)
 	if (likely(!audited))
 		return rc;
 
-	rc2 = audit_inode_permission(inode, perms, audited, denied, rc, flags);
+	/* fall back to ref-walk if we have to generate audit */
+	if (flags & MAY_NOT_BLOCK)
+		return -ECHILD;
+
+	rc2 = audit_inode_permission(inode, perms, audited, denied, rc);
 	if (rc2)
 		return rc2;
 	return rc;
security/selinux/include/avc.h +5 -3
index 74ea50977c201..cf4cc3ef959b5 100644
@@ -100,8 +100,7 @@ static inline u32 avc_audit_required(u32 requested,
 int slow_avc_audit(struct selinux_state *state,
 		   u32 ssid, u32 tsid, u16 tclass,
 		   u32 requested, u32 audited, u32 denied, int result,
-		   struct common_audit_data *a,
-		   unsigned flags);
+		   struct common_audit_data *a);
 
 /**
  * avc_audit - Audit the granting or denial of permissions.
@@ -135,9 +134,12 @@ static inline int avc_audit(struct selinux_state *state,
 	audited = avc_audit_required(requested, avd, result, 0, &denied);
 	if (likely(!audited))
 		return 0;
+	/* fall back to ref-walk if we have to generate audit */
+	if (flags & MAY_NOT_BLOCK)
+		return -ECHILD;
 	return slow_avc_audit(state, ssid, tsid, tclass,
 			      requested, audited, denied, result,
-			      a, flags);
+			      a);
 }
 
 #define AVC_STRICT 1 /* Ignore permissive mode. */
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 57/191 arm64: dts: allwinner: H6: Add PMU mode

In reply to Greg Kroah-Hartman

From: Andre Przywara <[email protected]>

[ Upstream commit 7aa9b9eb7d6a8fde7acbe0446444f7e3fae1fe3b ]

Add the Performance Monitoring Unit (PMU) device tree node to the H6 .dtsi, which tells DT users which interrupts are triggered by PMU overflow events on each core. The numbers come from the manual and have been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on a Pine H64.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +10 -0
index 72813e7aefb8a..bd43912696111 100644
@@ -69,6 +69,16 @@
 		clock-output-names = "osc32k";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 58/191 arm: dts: allwinner: H3: Add PMU node

In reply to Greg Kroah-Hartman

From: Andre Przywara <[email protected]>

[ Upstream commit 0388a110747bec0c9d9de995842bb2a03a26aae1 ]

Add the Performance Monitoring Unit (PMU) device tree node to the H3 .dtsi, which tells DT users which interrupts are triggered by PMU overflow events on each core. The numbers come from the manual and have been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on an OrangePi Zero.

---
 arch/arm/boot/dts/sun8i-h3.dtsi | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
arch/arm/boot/dts/sun8i-h3.dtsi +12 -3
index 9233ba30a857c..11172fbdc03aa 100644
@@ -80,7 +80,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
@@ -90,7 +90,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
@@ -100,7 +100,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -111,6 +111,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 59/191 selinux: ensure we cleanup the internal AVC counters on error in avc_insert()

In reply to Greg Kroah-Hartman

From: Paul Moore <[email protected]>

[ Upstream commit d8db60cb23e49a92cf8cada3297395c7fa50fdf8 ]

Fix avc_insert() to call avc_node_kill() if we've already allocated an AVC node and the code fails to insert the node in the cache.

Fixes fa1aa143ac4a ("selinux: extended permissions for ioctls")
Reported-by [email protected]
---
 security/selinux/avc.c | 51 ++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 27 deletions(-)
security/selinux/avc.c +24 -27
index 0622cae510461..83eef39c8a799 100644
@@ -689,40 +689,37 @@ static struct avc_node *avc_insert(struct selinux_avc *avc,
 	struct avc_node *pos, *node = NULL;
 	int hvalue;
 	unsigned long flag;
+	spinlock_t *lock;
+	struct hlist_head *head;
 
 	if (avc_latest_notif_update(avc, avd->seqno, 1))
-		goto out;
+		return NULL;
 
 	node = avc_alloc_node(avc);
-	if (node) {
-		struct hlist_head *head;
-		spinlock_t *lock;
-		int rc = 0;
-
-		hvalue = avc_hash(ssid, tsid, tclass);
-		avc_node_populate(node, ssid, tsid, tclass, avd);
-		rc = avc_xperms_populate(node, xp_node);
-		if (rc) {
-			kmem_cache_free(avc_node_cachep, node);
-			return NULL;
-		}
-		head = &avc->avc_cache.slots[hvalue];
-		lock = &avc->avc_cache.slots_lock[hvalue];
+	if (!node)
+		return NULL;
 
-		spin_lock_irqsave(lock, flag);
-		hlist_for_each_entry(pos, head, list) {
-			if (pos->ae.ssid == ssid &&
-			    pos->ae.tsid == tsid &&
-			    pos->ae.tclass == tclass) {
-				avc_node_replace(avc, node, pos);
-				goto found;
-			}
+	avc_node_populate(node, ssid, tsid, tclass, avd);
+	if (avc_xperms_populate(node, xp_node)) {
+		avc_node_kill(avc, node);
+		return NULL;
+	}
+
+	hvalue = avc_hash(ssid, tsid, tclass);
+	head = &avc->avc_cache.slots[hvalue];
+	lock = &avc->avc_cache.slots_lock[hvalue];
+	spin_lock_irqsave(lock, flag);
+	hlist_for_each_entry(pos, head, list) {
+		if (pos->ae.ssid == ssid &&
+			pos->ae.tsid == tsid &&
+			pos->ae.tclass == tclass) {
+			avc_node_replace(avc, node, pos);
+			goto found;
 		}
-		hlist_add_head_rcu(&node->list, head);
-found:
-		spin_unlock_irqrestore(lock, flag);
 	}
-out:
+	hlist_add_head_rcu(&node->list, head);
+found:
+	spin_unlock_irqrestore(lock, flag);
 	return node;
 }
 
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 60/191 arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

In reply to Greg Kroah-Hartman

From: Manu Gautam <[email protected]>

[ Upstream commit d026c96b25b7ce5df89526aad2df988d553edb4d ]

QUSB2 PHY on msm8996 doesn't work well when autosuspend by dwc3 core using USB2PHYCFG register is enabled. One of the issue seen is that PHY driver reports PLL lock failure and fails phy_init() if dwc3 core has USB2 PHY suspend enabled. Fix this by using quirks to disable USB2 PHY LPM/suspend and dwc3 core already takes care of explicitly suspending PHY during suspend if quirks are specified.

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/qcom/msm8996.dtsi +4 -0
index 8c86c41a0d25f..3e7baabf64507 100644
@@ -918,6 +918,8 @@
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy2>;
 				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
@@ -947,6 +949,8 @@
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 61/191 padata: always acquire cpu_hotplug_lock before pinst->lock

In reply to Greg Kroah-Hartman

From: Daniel Jordan <[email protected]>

[ Upstream commit 38228e8848cd7dd86ccb90406af32de0cad24be3 ]

lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken:

  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask

======================================================
WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
------------------------------------------------------
bash/205 is trying to acquire lock:
ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120

but task is already holding lock:
ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120

which lock already depends on the new lock.

padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent order. Which should be first? CPU hotplug calls into padata with cpu_hotplug_lock already held, so it should have priority.

Fixes 6751fb3c0e0c ("padata: Use get_online_cpus/put_online_cpus")
Cc Eric Biggers <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Steffen Klassert <[email protected]>
---
 kernel/padata.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/padata.c +2 -2
index cfab62923c452..c280cb153915f 100644
@@ -671,8 +671,8 @@ int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
 	struct cpumask *serial_mask, *parallel_mask;
 	int err = -EINVAL;
 
-	mutex_lock(&pinst->lock);
 	get_online_cpus();
+	mutex_lock(&pinst->lock);
 
 	switch (cpumask_type) {
 	case PADATA_CPU_PARALLEL:
@@ -690,8 +690,8 @@ int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
 	err =  __padata_set_cpumasks(pinst, parallel_mask, serial_mask);
 
 out:
-	put_online_cpus();
 	mutex_unlock(&pinst->lock);
+	put_online_cpus();
 
 	return err;
 }
Signature · 1 line
2.20.1
#69 lore raw

Re: [PATCH 4.19 061/191] padata: always acquire cpu_hotplug_lock before pinst->lock

Quoted 17 lines · Greg Kroah-Hartman

From: Daniel Jordan <[email protected]>

[ Upstream commit 38228e8848cd7dd86ccb90406af32de0cad24be3 ]

lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken:

  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask

======================================================
WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
------------------------------------------------------
bash/205 is trying to acquire lock:
ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120

Quoted 4 lines

but task is already holding lock:
ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120

which lock already depends on the new lock.

I think this patch should be dropped from all stable queues (4.4, 4.9, 4.14, 4.19, 5.4, and 5.5).

The main benefit is to un-break lockdep for testing with future padata changes, and an actual deadlock seems unlikely.

These stable versions don't fix the ordering in padata_remove_cpu() either (nothing calls it though).

I tried the other stable padata patch in this cycle ("padata: validate cpumask without removed CPU during offline"), it passed my tests and should stay in.

thanks,
Daniel

maintainer
#70 lore raw

Re: [PATCH 4.19 061/191] padata: always acquire cpu_hotplug_lock before pinst->lock

Quoted 26 lines · Daniel Jordan
Quoted 17 lines · Greg Kroah-Hartman

From: Daniel Jordan <[email protected]>

[ Upstream commit 38228e8848cd7dd86ccb90406af32de0cad24be3 ]

lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken:

  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask

======================================================
WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
------------------------------------------------------
bash/205 is trying to acquire lock:
ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120

Quoted 4 lines

but task is already holding lock:
ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120

which lock already depends on the new lock.

I think this patch should be dropped from all stable queues (4.4, 4.9, 4.14, 4.19, 5.4, and 5.5).

Quoted 8 lines

The main benefit is to un-break lockdep for testing with future padata changes, and an actual deadlock seems unlikely.

These stable versions don't fix the ordering in padata_remove_cpu() either (nothing calls it though).

I tried the other stable padata patch in this cycle ("padata: validate cpumask without removed CPU during offline"), it passed my tests and should stay in.

I've dropped it, thanks.

Signature · 2 lines
Thanks,
Sasha
author maintainer
#71 lore raw

PATCH 62/191 ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3

In reply to Greg Kroah-Hartman

From: Andrey Smirnov <[email protected]>

[ Upstream commit cd58a174e58649426fb43d7456e5f7d7eab58af1 ]

RDU2 production units come with resistor connecting WP pin to correpsonding GPIO DNPed for both SD card slots. Drop any WP related configuration and mark both slots with "disable-wp".

---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +2 -4
index 315d0e7615f33..56d6e82b75337 100644
@@ -657,7 +657,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -670,7 +670,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -1081,7 +1081,6 @@
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x40010040
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
 		>;
 	};
@@ -1094,7 +1093,6 @@
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x40010040
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
 
 		>;
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 63/191 ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed

In reply to Greg Kroah-Hartman

From: Andrey Smirnov <[email protected]>

[ Upstream commit 6bb1e09c4c375db29770444f689f35f5cbe696bc ]

Cabling used to connect devices to USBH1 on RDU2 does not meet USB spec cable quality and cable length requirements to operate at High Speed, so limit the port to Full Speed only.

---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +1 -0
index 56d6e82b75337..bc5f2de02d433 100644
@@ -804,6 +804,7 @@
 &usbh1 {
 	vbus-supply = <&reg_5p0v_main>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	status = "okay";
 };
 
Signature · 1 line
2.20.1
author maintainer
#73 lore raw

PATCH 64/191 PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in

In reply to Greg Kroah-Hartman

From: Wei Liu <[email protected]>

[ Upstream commit 574f29036fce385e28617547955dd6911d375025 ]

Previously quirk_paxc_bridge() was applied when the iproc driver was built-in, but not when it was compiled as a module.

This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM:
PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be defined.

Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk is always applied, whether iproc is built-in or a module.

[bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c]
---
 drivers/pci/controller/pcie-iproc.c | 24 ++++++++++++++++++++++++
 drivers/pci/quirks.c                | 26 --------------------------
 2 files changed, 24 insertions(+), 26 deletions(-)
drivers/pci/controller/pcie-iproc.c +24 -0
index 9d5cbc75d5ae0..ec86414216f97 100644
@@ -1526,6 +1526,30 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
 			quirk_paxc_disable_msi_parsing);
 
+static void quirk_paxc_bridge(struct pci_dev *pdev)
+{
+	/*
+	 * The PCI config space is shared with the PAXC root port and the first
+	 * Ethernet device.  So, we need to workaround this by telling the PCI
+	 * code that the bridge is not an Ethernet device.
+	 */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
+
+	/*
+	 * MPSS is not being set properly (as it is currently 0).  This is
+	 * because that area of the PCI config space is hard coded to zero, and
+	 * is not modifiable by firmware.  Set this to 2 (e.g., 512 byte MPS)
+	 * so that the MPS can be set to the real max value.
+	 */
+	pdev->pcie_mpss = 2;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
+
 MODULE_AUTHOR("Ray Jui <[email protected]>");
 MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
 MODULE_LICENSE("GPL v2");
drivers/pci/quirks.c +0 -26
index 5b4c36ab15962..84f10cda539ea 100644
@@ -2358,32 +2358,6 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
 			 PCI_DEVICE_ID_TIGON3_5719,
 			 quirk_brcm_5719_limit_mrrs);
 
-#ifdef CONFIG_PCIE_IPROC_PLATFORM
-static void quirk_paxc_bridge(struct pci_dev *pdev)
-{
-	/*
-	 * The PCI config space is shared with the PAXC root port and the first
-	 * Ethernet device.  So, we need to workaround this by telling the PCI
-	 * code that the bridge is not an Ethernet device.
-	 */
-	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
-		pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
-
-	/*
-	 * MPSS is not being set properly (as it is currently 0).  This is
-	 * because that area of the PCI config space is hard coded to zero, and
-	 * is not modifiable by firmware.  Set this to 2 (e.g., 512 byte MPS)
-	 * so that the MPS can be set to the real max value.
-	 */
-	pdev->pcie_mpss = 2;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
-#endif
-
 /*
  * Originally in EDAC sources for i82875P: Intel tells BIOS developers to
  * hide device 6 which configures the overflow device access containing the
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 65/191 media: cx23885: Add support for AVerMedia CE310B

In reply to Greg Kroah-Hartman

From: Forest Crossman <[email protected]>

[ Upstream commit dc4cac67e13515835ed8081d510aa507aacb013b ]

The AVerMedia CE310B is a simple composite + S-Video + stereo audio capture card, and uses only the CX23888 to perform all of these functions.

I've tested both video inputs and the audio interface and confirmed that they're all working. However, there are some issues:

* Sometimes when I switch inputs the video signal turns black and can't be recovered until the system is rebooted. I haven't been able to determine the cause of this behavior, nor have I found a solution to fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal, and some of the VBI data appears as noise at the top of the frame, but I assume that to be a result of my very noisy RF environment and the card's unshielded input traces rather than a configuration issue.

---
 drivers/media/pci/cx23885/cx23885-cards.c | 24 +++++++++++++++++++++++
 drivers/media/pci/cx23885/cx23885-video.c |  3 ++-
 drivers/media/pci/cx23885/cx23885.h       |  1 +
 3 files changed, 27 insertions(+), 1 deletion(-)
drivers/media/pci/cx23885/cx23885-cards.c +24 -0
index ed3210dc50bc2..642aefdbb7bb6 100644
@@ -811,6 +811,25 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Hauppauge WinTV-Starburst2",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_AVERMEDIA_CE310B] = {
+		.name		= "AVerMedia CE310B",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN1_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_NONE0_CH3,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN8_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_VIN7_CH3 |
+				  CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -1134,6 +1153,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0xf02a,
 		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST2,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0x3100,
+		.card      = CX23885_BOARD_AVERMEDIA_CE310B,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -2358,6 +2381,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_DVBSKY_T982:
 	case CX23885_BOARD_VIEWCAST_260E:
 	case CX23885_BOARD_VIEWCAST_460E:
+	case CX23885_BOARD_AVERMEDIA_CE310B:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);
drivers/media/pci/cx23885/cx23885-video.c +2 -1
index f8a3deadc77a1..2a20c7165e1e8 100644
@@ -268,7 +268,8 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
 		(dev->board == CX23885_BOARD_MYGICA_X8507) ||
 		(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||
 		(dev->board == CX23885_BOARD_VIEWCAST_260E) ||
-		(dev->board == CX23885_BOARD_VIEWCAST_460E)) {
+		(dev->board == CX23885_BOARD_VIEWCAST_460E) ||
+		(dev->board == CX23885_BOARD_AVERMEDIA_CE310B)) {
 		/* Configure audio routing */
 		v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
 			INPUT(input)->amux, 0, 0);
drivers/media/pci/cx23885/cx23885.h +1 -0
index cf965efabe666..7bbd62cc993ef 100644
@@ -111,6 +111,7 @@
 #define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
+#define CX23885_BOARD_AVERMEDIA_CE310B         62
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 66/191 PCI: Add generic quirk for increasing D3hot delay

In reply to Greg Kroah-Hartman

From: Daniel Drake <[email protected]>

[ Upstream commit 62fe23df067715a21c4aef44068efe7ceaa8f627 ]

Separate the D3 delay increase functionality out of quirk_radeon_pm() into its own function so that it can be shared with other quirks, including the AMD Ryzen XHCI quirk that will be introduced in a followup commit.

Tweak the function name and message to indicate more clearly that the delay relates to a D3hot-to-D0 transition.

---
 drivers/pci/quirks.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
drivers/pci/quirks.c +12 -7
index 84f10cda539ea..798d46a266037 100644
@@ -1848,16 +1848,21 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2609, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260a, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
+static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay)
+{
+	if (dev->d3_delay >= delay)
+		return;
+
+	dev->d3_delay = delay;
+	pci_info(dev, "extending delay after power-on from D3hot to %d msec\n",
+		 dev->d3_delay);
+}
+
 static void quirk_radeon_pm(struct pci_dev *dev)
 {
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
-	    dev->subsystem_device == 0x00e2) {
-		if (dev->d3_delay < 20) {
-			dev->d3_delay = 20;
-			pci_info(dev, "extending delay after power-on from D3 to %d msec\n",
-				 dev->d3_delay);
-		}
-	}
+	    dev->subsystem_device == 0x00e2)
+		quirk_d3hot_delay(dev, 20);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm);
 
Signature · 1 line
2.20.1
author maintainer
#76 lore raw

PATCH 67/191 PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers

In reply to Greg Kroah-Hartman

From: Daniel Drake <[email protected]>

[ Upstream commit 3030df209aa8cf831b9963829bd9f94900ee8032 ]

On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the XHCI controller fails to resume from runtime suspend or s2idle, and USB becomes unusable from that point.

xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3 xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002) xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout xhci_hcd 0000:03:00.4: PCI post-resume error -110! xhci_hcd 0000:03:00.4: HC died; cleaning up

During suspend, a transition to D3cold is attempted, however the affected platforms do not seem to cut the power to the PCI device when in this state, so the device stays in D3hot.

Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay is increased to 20ms. The transition failure does not appear to be detectable as a CRS condition. Add a PCI quirk to increase the delay on the affected hardware.

---
 drivers/pci/quirks.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/pci/quirks.c +16 -0
index 798d46a266037..419dda6dbd166 100644
@@ -1866,6 +1866,22 @@ static void quirk_radeon_pm(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm);
 
+/*
+ * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=205587
+ *
+ * The kernel attempts to transition these devices to D3cold, but that seems
+ * to be ineffective on the platforms in question; the PCI device appears to
+ * remain on in D3hot state. The D3hot-to-D0 transition then requires an
+ * extended delay in order to succeed.
+ */
+static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
+{
+	quirk_d3hot_delay(dev, 20);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
+
 #ifdef CONFIG_X86_IO_APIC
 static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
 {
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 68/191 media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit afb34781620274236bd9fc9246e22f6963ef5262 ]

When building with Clang + -Wtautological-constant-compare, several of the ivtv and cx18 drivers warn along the lines of:

drivers/media/pci/cx18/cx18-driver.c:1005:21: warning: converting the result of '<<' to a boolean always evaluates to true [-Wtautological-constant-compare]

                         cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
                                         ^
 drivers/media/pci/cx18/cx18-cards.h:18:37: note: expanded from macro
 'CX18_HW_GPIO_RESET_CTRL'
 #define CX18_HW_GPIO_RESET_CTRL         (1 << 6)
                                           ^

1 warning generated.

This warning happens because the shift operation is implicitly converted to a boolean in v4l2_device_mask_call_all before being negated. This can be solved by just comparing the mask result to 0 explicitly so that there is no boolean conversion. The ultimate goal is to enable -Wtautological-compare globally because there are several subwarnings that would be helpful to have.

For visual consistency and avoidance of these warnings in the future, all of the implicitly boolean conversions in the v4l2_device macros are converted to explicit ones as well.

---
 include/media/v4l2-device.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
include/media/v4l2-device.h +6 -6
index b330e4a08a6b8..40840fec337ca 100644
@@ -372,7 +372,7 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 		struct v4l2_subdev *__sd;				\
 									\
 		__v4l2_device_call_subdevs_p(v4l2_dev, __sd,		\
-			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			(grpid) == 0 || __sd->grp_id == (grpid), o, f ,	\
 			##args);					\
 	} while (0)
 
@@ -404,7 +404,7 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 ({									\
 	struct v4l2_subdev *__sd;					\
 	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,		\
-			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			(grpid) == 0 || __sd->grp_id == (grpid), o, f ,	\
 			##args);					\
 })
 
@@ -432,8 +432,8 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 		struct v4l2_subdev *__sd;				\
 									\
 		__v4l2_device_call_subdevs_p(v4l2_dev, __sd,		\
-			!(grpmsk) || (__sd->grp_id & (grpmsk)), o, f ,	\
-			##args);					\
+			(grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o,	\
+			f , ##args);					\
 	} while (0)
 
 /**
@@ -463,8 +463,8 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 ({									\
 	struct v4l2_subdev *__sd;					\
 	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,		\
-			!(grpmsk) || (__sd->grp_id & (grpmsk)), o, f ,	\
-			##args);					\
+			(grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o,	\
+			f , ##args);					\
 })
 
 
Signature · 1 line
2.20.1
author maintainer
#78 lore raw

PATCH 69/191 reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit 4d5c1adaf893b8aa52525d2b81995e949bcb3239 ]

When we fail to allocate string for journal device name we jump to 'error' label which tries to unlock reiserfs write lock which is not held. Jump to 'error_unlocked' instead.

Fixes f32485be8397 ("reiserfs: delay reiserfs lock until journal initialization")
---
 fs/reiserfs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/reiserfs/super.c +1 -1
index 6280efeceb0a2..de5eda33c92a0 100644
@@ -1954,7 +1954,7 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 		if (!sbi->s_jdev) {
 			SWARN(silent, s, "", "Cannot allocate memory for "
 				"journal device name");
-			goto error;
+			goto error_unlocked;
 		}
 	}
 #ifdef CONFIG_QUOTA
Signature · 1 line
2.20.1
author maintainer
#79 lore raw

PATCH 70/191 r8169: check that Realtek PHY driver module is loaded

In reply to Greg Kroah-Hartman

From: Heiner Kallweit <[email protected]>

[ Upstream commit f325937735498afb054a0195291bbf68d0b60be5 ]

Some users complained about problems with r8169 and it turned out that the generic PHY driver was used instead instead of the dedicated one. In all cases reason was that r8169.ko was in initramfs, but realtek.ko not. Manually adding realtek.ko to initramfs fixed the issues. Root cause seems to be that tools like dracut and genkernel don't consider softdeps. Add a check for loaded Realtek PHY driver module and provide the user with a hint if it's not loaded.

---
 drivers/net/ethernet/realtek/r8169.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/net/ethernet/realtek/r8169.c +9 -0
index 4ab87fe845427..6ea43e48d5f97 100644
@@ -7433,6 +7433,15 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int chipset, region, i;
 	int jumbo_max, rc;
 
+	/* Some tools for creating an initramfs don't consider softdeps, then
+	 * r8169.ko may be in initramfs, but realtek.ko not. Then the generic
+	 * PHY driver is used that doesn't work with most chip versions.
+	 */
+	if (!driver_find("RTL8201CP Ethernet", &mdio_bus_type)) {
+		dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be added to initramfs?\n");
+		return -ENOENT;
+	}
+
 	dev = devm_alloc_etherdev(&pdev->dev, sizeof (*tp));
 	if (!dev)
 		return -ENOMEM;
Signature · 1 line
2.20.1
author maintainer
#80 lore raw

PATCH 71/191 fore200e: Fix incorrect checks of NULL pointer dereference

In reply to Greg Kroah-Hartman

From: Aditya Pakki <[email protected]>

[ Upstream commit bbd20c939c8aa3f27fa30e86691af250bf92973a ]

In fore200e_send and fore200e_close, the pointers from the arguments are dereferenced in the variable declaration block and then checked for NULL. The patch fixes these issues by avoiding NULL pointer dereferences.

---
 drivers/atm/fore200e.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)
drivers/atm/fore200e.c +18 -7
index 99a38115b0a8f..86aab14872fd0 100644
@@ -1504,12 +1504,14 @@ fore200e_open(struct atm_vcc *vcc)
 static void
 fore200e_close(struct atm_vcc* vcc)
 {
-    struct fore200e*        fore200e = FORE200E_DEV(vcc->dev);
     struct fore200e_vcc*    fore200e_vcc;
+    struct fore200e*        fore200e;
     struct fore200e_vc_map* vc_map;
     unsigned long           flags;
 
     ASSERT(vcc);
+    fore200e = FORE200E_DEV(vcc->dev);
+
     ASSERT((vcc->vpi >= 0) && (vcc->vpi < 1<<FORE200E_VPI_BITS));
     ASSERT((vcc->vci >= 0) && (vcc->vci < 1<<FORE200E_VCI_BITS));
 
@@ -1554,10 +1556,10 @@ fore200e_close(struct atm_vcc* vcc)
 static int
 fore200e_send(struct atm_vcc *vcc, struct sk_buff *skb)
 {
-    struct fore200e*        fore200e     = FORE200E_DEV(vcc->dev);
-    struct fore200e_vcc*    fore200e_vcc = FORE200E_VCC(vcc);
+    struct fore200e*        fore200e;
+    struct fore200e_vcc*    fore200e_vcc;
     struct fore200e_vc_map* vc_map;
-    struct host_txq*        txq          = &fore200e->host_txq;
+    struct host_txq*        txq;
     struct host_txq_entry*  entry;
     struct tpd*             tpd;
     struct tpd_haddr        tpd_haddr;
@@ -1570,9 +1572,18 @@ fore200e_send(struct atm_vcc *vcc, struct sk_buff *skb)
     unsigned char*          data;
     unsigned long           flags;
 
-    ASSERT(vcc);
-    ASSERT(fore200e);
-    ASSERT(fore200e_vcc);
+    if (!vcc)
+        return -EINVAL;
+
+    fore200e = FORE200E_DEV(vcc->dev);
+    fore200e_vcc = FORE200E_VCC(vcc);
+
+    if (!fore200e)
+        return -EINVAL;
+
+    txq = &fore200e->host_txq;
+    if (!fore200e_vcc)
+        return -EINVAL;
 
     if (!test_bit(ATM_VF_READY, &vcc->flags)) {
 	DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi);
Signature · 1 line
2.20.1
author maintainer
#81 lore raw

PATCH 72/191 isdn: dont mark kcapi_proc_exit as __exit

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit b33bdf8020c94438269becc6dace9ed49257c4ba ]

As everybody pointed out by now, my patch to clean up CAPI introduced a link time warning, as the two parts of the capi driver are now in one module and the exit function may need to be called in the error path of the init function:

Quoted 1 line
Quoted 1 line

WARNING: drivers/isdn/capi/kernelcapi.o(.text+0xea4): Section mismatch in reference from the function kcapi_exit() to the function .exit.text:kcapi_proc_exit()

The function kcapi_exit() references a function in an exit section. Often the function kcapi_proc_exit() has valid usage outside the exit section and the fix is to remove the __exit annotation of kcapi_proc_exit.

Remove the incorrect __exit annotation.

---
 drivers/isdn/capi/kcapi_proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/isdn/capi/kcapi_proc.c +1 -1
index c94bd12c0f7c6..28cd051f1dfd9 100644
@@ -239,7 +239,7 @@ kcapi_proc_init(void)
 	proc_create_seq("capi/driver",       0, NULL, &seq_capi_driver_ops);
 }
 
-void __exit
+void
 kcapi_proc_exit(void)
 {
 	remove_proc_entry("capi/driver",       NULL);
Signature · 1 line
2.20.1
author maintainer
#82 lore raw

PATCH 73/191 netfilter: nft_tunnel: add the missing ERSPAN_VERSION nla_policy

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

[ Upstream commit 0705f95c332081036d85f26691e9d3cd7d901c31 ]

ERSPAN_VERSION is an attribute parsed in kernel side, nla_policy type should be added for it, like other attributes.

Fixes af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
---
 net/netfilter/nft_tunnel.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/netfilter/nft_tunnel.c +2 -1
index e5444f3ff43fc..5e66042ac3466 100644
@@ -218,8 +218,9 @@ static int nft_tunnel_obj_vxlan_init(const struct nlattr *attr,
 }
 
 static const struct nla_policy nft_tunnel_opts_erspan_policy[NFTA_TUNNEL_KEY_ERSPAN_MAX + 1] = {
+	[NFTA_TUNNEL_KEY_ERSPAN_VERSION]	= { .type = NLA_U32 },
 	[NFTA_TUNNEL_KEY_ERSPAN_V1_INDEX]	= { .type = NLA_U32 },
-	[NFTA_TUNNEL_KEY_ERSPAN_V2_DIR]	= { .type = NLA_U8 },
+	[NFTA_TUNNEL_KEY_ERSPAN_V2_DIR]		= { .type = NLA_U8 },
 	[NFTA_TUNNEL_KEY_ERSPAN_V2_HWID]	= { .type = NLA_U8 },
 };
 
Signature · 1 line
2.20.1
author maintainer
#83 lore raw

PATCH 74/191 ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit df4654bd6e42125d9b85ce3a26eaca2935290b98 ]

Clang warns:

../sound/usb/usx2y/usX2Yhwdep.c:122:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]

        info->version = USX2Y_DRIVER_VERSION;
        ^
../sound/usb/usx2y/usX2Yhwdep.c:120:2: note: previous statement is here
        if (us428->chip_status & USX2Y_STAT_CHIP_INIT)
        ^

1 warning generated.

This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns.

This was introduced before the beginning of git history so no fixes tag.

---
 sound/usb/usx2y/usX2Yhwdep.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/usb/usx2y/usX2Yhwdep.c +1 -1
index c1dd9a7b48df6..36b3459703640 100644
@@ -131,7 +131,7 @@ static int snd_usX2Y_hwdep_dsp_status(struct snd_hwdep *hw,
 	info->num_dsps = 2;		// 0: Prepad Data, 1: FPGA Code
 	if (us428->chip_status & USX2Y_STAT_CHIP_INIT)
 		info->chip_ready = 1;
- 	info->version = USX2Y_DRIVER_VERSION; 
+	info->version = USX2Y_DRIVER_VERSION;
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 75/191 b43legacy: Fix -Wcast-function-type

In reply to Greg Kroah-Hartman

From: Phong Tran <[email protected]>

[ Upstream commit 475eec112e4267232d10f4afe2f939a241692b6c ]

correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20

---
 drivers/net/wireless/broadcom/b43legacy/main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/wireless/broadcom/b43legacy/main.c +3 -2
index 55f411925960e..770cc218ca4bd 100644
@@ -1304,8 +1304,9 @@ static void handle_irq_ucode_debug(struct b43legacy_wldev *dev)
 }
 
 /* Interrupt handler bottom-half */
-static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
+static void b43legacy_interrupt_tasklet(unsigned long data)
 {
+	struct b43legacy_wldev *dev = (struct b43legacy_wldev *)data;
 	u32 reason;
 	u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
 	u32 merged_dma_reason = 0;
@@ -3775,7 +3776,7 @@ static int b43legacy_one_core_attach(struct ssb_device *dev,
 	b43legacy_set_status(wldev, B43legacy_STAT_UNINIT);
 	wldev->bad_frames_preempt = modparam_bad_frames_preempt;
 	tasklet_init(&wldev->isr_tasklet,
-		     (void (*)(unsigned long))b43legacy_interrupt_tasklet,
+		     b43legacy_interrupt_tasklet,
 		     (unsigned long)wldev);
 	if (modparam_pio)
 		wldev->__using_pio = true;
Signature · 1 line
2.20.1
author maintainer
#85 lore raw

PATCH 76/191 ipw2x00: Fix -Wcast-function-type

In reply to Greg Kroah-Hartman

From: Phong Tran <[email protected]>

[ Upstream commit ebd77feb27e91bb5fe35a7818b7c13ea7435fb98 ]

correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20

---
 drivers/net/wireless/intel/ipw2x00/ipw2100.c | 7 ++++---
 drivers/net/wireless/intel/ipw2x00/ipw2200.c | 5 +++--
 2 files changed, 7 insertions(+), 5 deletions(-)
drivers/net/wireless/intel/ipw2x00/ipw2100.c +4 -3
index 910db46db6a12..a3a470976a5c7 100644
@@ -3220,8 +3220,9 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
 	}
 }
 
-static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
+static void ipw2100_irq_tasklet(unsigned long data)
 {
+	struct ipw2100_priv *priv = (struct ipw2100_priv *)data;
 	struct net_device *dev = priv->net_dev;
 	unsigned long flags;
 	u32 inta, tmp;
@@ -6025,7 +6026,7 @@ static void ipw2100_rf_kill(struct work_struct *work)
 	spin_unlock_irqrestore(&priv->low_lock, flags);
 }
 
-static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
+static void ipw2100_irq_tasklet(unsigned long data);
 
 static const struct net_device_ops ipw2100_netdev_ops = {
 	.ndo_open		= ipw2100_open,
@@ -6155,7 +6156,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
 	INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
 	INIT_DELAYED_WORK(&priv->scan_event, ipw2100_scan_event);
 
-	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+	tasklet_init(&priv->irq_tasklet,
 		     ipw2100_irq_tasklet, (unsigned long)priv);
 
 	/* NOTE:  We do not start the deferred work for status checks yet */
drivers/net/wireless/intel/ipw2x00/ipw2200.c +3 -2
index 9644e7b93645f..04aee2fdba375 100644
@@ -1959,8 +1959,9 @@ static void notify_wx_assoc_event(struct ipw_priv *priv)
 	wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
 }
 
-static void ipw_irq_tasklet(struct ipw_priv *priv)
+static void ipw_irq_tasklet(unsigned long data)
 {
+	struct ipw_priv *priv = (struct ipw_priv *)data;
 	u32 inta, inta_mask, handled = 0;
 	unsigned long flags;
 	int rc = 0;
@@ -10694,7 +10695,7 @@ static int ipw_setup_deferred_work(struct ipw_priv *priv)
 	INIT_WORK(&priv->qos_activate, ipw_bg_qos_activate);
 #endif				/* CONFIG_IPW2200_QOS */
 
-	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+	tasklet_init(&priv->irq_tasklet,
 		     ipw_irq_tasklet, (unsigned long)priv);
 
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#86 lore raw

PATCH 77/191 iwlegacy: Fix -Wcast-function-type

In reply to Greg Kroah-Hartman

From: Phong Tran <[email protected]>

[ Upstream commit da5e57e8a6a3e69dac2937ba63fa86355628fbb2 ]

correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20

---
 drivers/net/wireless/intel/iwlegacy/3945-mac.c | 5 +++--
 drivers/net/wireless/intel/iwlegacy/4965-mac.c | 5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)
drivers/net/wireless/intel/iwlegacy/3945-mac.c +3 -2
index 57e3b6cca2341..b536ec20eaccb 100644
@@ -1392,8 +1392,9 @@ il3945_dump_nic_error_log(struct il_priv *il)
 }
 
 static void
-il3945_irq_tasklet(struct il_priv *il)
+il3945_irq_tasklet(unsigned long data)
 {
+	struct il_priv *il = (struct il_priv *)data;
 	u32 inta, handled = 0;
 	u32 inta_fh;
 	unsigned long flags;
@@ -3419,7 +3420,7 @@ il3945_setup_deferred_work(struct il_priv *il)
 	timer_setup(&il->watchdog, il_bg_watchdog, 0);
 
 	tasklet_init(&il->irq_tasklet,
-		     (void (*)(unsigned long))il3945_irq_tasklet,
+		     il3945_irq_tasklet,
 		     (unsigned long)il);
 }
 
drivers/net/wireless/intel/iwlegacy/4965-mac.c +3 -2
index 280cd8ae1696d..6fc51c74cdb86 100644
@@ -4360,8 +4360,9 @@ il4965_synchronize_irq(struct il_priv *il)
 }
 
 static void
-il4965_irq_tasklet(struct il_priv *il)
+il4965_irq_tasklet(unsigned long data)
 {
+	struct il_priv *il = (struct il_priv *)data;
 	u32 inta, handled = 0;
 	u32 inta_fh;
 	unsigned long flags;
@@ -6257,7 +6258,7 @@ il4965_setup_deferred_work(struct il_priv *il)
 	timer_setup(&il->watchdog, il_bg_watchdog, 0);
 
 	tasklet_init(&il->irq_tasklet,
-		     (void (*)(unsigned long))il4965_irq_tasklet,
+		     il4965_irq_tasklet,
 		     (unsigned long)il);
 }
 
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 78/191 rtlwifi: rtl_pci: Fix -Wcast-function-type

In reply to Greg Kroah-Hartman

From: Phong Tran <[email protected]>

[ Upstream commit cb775c88da5d48a85d99d95219f637b6fad2e0e9 ]

correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20

---
 drivers/net/wireless/realtek/rtlwifi/pci.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/net/wireless/realtek/rtlwifi/pci.c +6 -4
index 5d1fda16fc8c4..83749578fa8b3 100644
@@ -1082,13 +1082,15 @@ done:
 	return ret;
 }
 
-static void _rtl_pci_irq_tasklet(struct ieee80211_hw *hw)
+static void _rtl_pci_irq_tasklet(unsigned long data)
 {
+	struct ieee80211_hw *hw = (struct ieee80211_hw *)data;
 	_rtl_pci_tx_chk_waitq(hw);
 }
 
-static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
+static void _rtl_pci_prepare_bcn_tasklet(unsigned long data)
 {
+	struct ieee80211_hw *hw = (struct ieee80211_hw *)data;
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
@@ -1214,10 +1216,10 @@ static void _rtl_pci_init_struct(struct ieee80211_hw *hw,
 
 	/*task */
 	tasklet_init(&rtlpriv->works.irq_tasklet,
-		     (void (*)(unsigned long))_rtl_pci_irq_tasklet,
+		     _rtl_pci_irq_tasklet,
 		     (unsigned long)hw);
 	tasklet_init(&rtlpriv->works.irq_prepare_bcn_tasklet,
-		     (void (*)(unsigned long))_rtl_pci_prepare_bcn_tasklet,
+		     _rtl_pci_prepare_bcn_tasklet,
 		     (unsigned long)hw);
 	INIT_WORK(&rtlpriv->works.lps_change_work,
 		  rtl_lps_change_work_callback);
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 79/191 orinoco: avoid assertion in case of NULL pointer

In reply to Greg Kroah-Hartman

From: Aditya Pakki <[email protected]>

[ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ]

In ezusb_init, if upriv is NULL, the code crashes. However, the caller in ezusb_probe can handle the error and print the failure message. The patch replaces the BUG_ON call to error return.

---
 drivers/net/wireless/intersil/orinoco/orinoco_usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/intersil/orinoco/orinoco_usb.c +2 -1
index 2c7dd2a7350c1..b704e4bce171d 100644
@@ -1364,7 +1364,8 @@ static int ezusb_init(struct hermes *hw)
 	int retval;
 
 	BUG_ON(in_interrupt());
-	BUG_ON(!upriv);
+	if (!upriv)
+		return -EINVAL;
 
 	upriv->reply_count = 0;
 	/* Write the MAGIC number on the simulated registers to keep
Signature · 1 line
2.20.1
#89 lore raw

Re: [PATCH 4.19 079/191] orinoco: avoid assertion in case of NULL pointer

Hi!

Quoted 7 lines

From: Aditya Pakki <[email protected]>

[ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ]

In ezusb_init, if upriv is NULL, the code crashes. However, the caller in ezusb_probe can handle the error and print the failure message. The patch replaces the BUG_ON call to error return.

The caller already checked that upriv is not NULL, AFAICT.

    priv = alloc_orinocodev(sizeof(*upriv), &udev->dev,
    	                         ezusb_hard_reset, NULL);
    if (!priv) {
        err("Couldn't allocate orinocodev");
        retval = -ENOMEM;
        goto exit;
    }

I don't see this as an improvement.

Best regards,
Pavel

Quoted 11 lines

+++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c

drivers/net/wireless/intersil/orinoco/orinoco_usb.c +2 -1
@@ -1364,7 +1364,8 @@ static int ezusb_init(struct hermes *hw)
 	int retval;
 
 	BUG_ON(in_interrupt());
-	BUG_ON(!upriv);
+	if (!upriv)
+		return -EINVAL;
 
 	upriv->reply_count = 0;
 	/* Write the MAGIC number on the simulated registers to keep
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#90 lore raw

PATCH 80/191 ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1

In reply to Greg Kroah-Hartman

From: Erik Kaneda <[email protected]>

[ Upstream commit 5ddbd77181dfca61b16d2e2222382ea65637f1b9 ]

ACPICA commit 29cc8dbc5463a93625bed87d7550a8bed8913bf4

create_buffer_field is a deferred op that is typically processed in load pass 2. However, disassembly of control method contents walk the parse tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed in a later walk. This is a problem when there is a control method that has the same name as the AML_CREATE object. In this case, any use of the name segment will be detected as a method call rather than a reference to a buffer field. If this is detected as a method call, it can result in a mal-formed parse tree if the control methods have parameters.

This change in processing AML_CREATE ops earlier solves this issue by inserting the named object in the ACPI namespace so that references to this name would be detected as a name string rather than a method call.

---
 drivers/acpi/acpica/dsfield.c |  2 +-
 drivers/acpi/acpica/dswload.c | 21 +++++++++++++++++++++
 2 files changed, 22 insertions(+), 1 deletion(-)
drivers/acpi/acpica/dsfield.c +1 -1
index 30fe89545d6ab..bcc6a7acc5762 100644
@@ -244,7 +244,7 @@ cleanup:
  * FUNCTION:    acpi_ds_get_field_names
  *
  * PARAMETERS:  info            - create_field info structure
- *  `           walk_state      - Current method state
+ *              walk_state      - Current method state
  *              arg             - First parser arg for the field name list
  *
  * RETURN:      Status
drivers/acpi/acpica/dswload.c +21 -0
index d06c414462822..ba53662f12179 100644
@@ -412,6 +412,27 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
 			  walk_state));
 
+	/*
+	 * Disassembler: handle create field operators here.
+	 *
+	 * create_buffer_field is a deferred op that is typically processed in load
+	 * pass 2. However, disassembly of control method contents walk the parse
+	 * tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed
+	 * in a later walk. This is a problem when there is a control method that
+	 * has the same name as the AML_CREATE object. In this case, any use of the
+	 * name segment will be detected as a method call rather than a reference
+	 * to a buffer field.
+	 *
+	 * This earlier creation during disassembly solves this issue by inserting
+	 * the named object in the ACPI namespace so that references to this name
+	 * would be a name string rather than a method call.
+	 */
+	if ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) &&
+	    (walk_state->op_info->flags & AML_CREATE)) {
+		status = acpi_ds_create_buffer_field(op, walk_state);
+		return_ACPI_STATUS(status);
+	}
+
 	/* We are only interested in opcodes that have an associated name */
 
 	if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
Signature · 1 line
2.20.1
author maintainer
#91 lore raw

PATCH 81/191 scsi: ufs: Complete pending requests in host reset and restore path

In reply to Greg Kroah-Hartman

From: Can Guo <[email protected]>

[ Upstream commit 2df74b6985b51e77756e2e8faa16c45ca3ba53c5 ]

In UFS host reset and restore path, before probe, we stop and start the host controller once. After host controller is stopped, the pending requests, if any, are cleared from the doorbell, but no completion IRQ would be raised due to the hba is stopped. These pending requests shall be completed along with the first NOP_OUT command (as it is the first command which can raise a transfer completion IRQ) sent during probe. Since the OCSs of these pending requests are not SUCCESS (because they are not yet literally finished), their UPIUs shall be dumped. When there are multiple pending requests, the UPIU dump can be overwhelming and may lead to stability issues because it is in atomic context. Therefore, before probe, complete these pending requests right after host controller is stopped and silence the UPIU dump from them.

---
 drivers/scsi/ufs/ufshcd.c | 24 ++++++++++--------------
 drivers/scsi/ufs/ufshcd.h |  2 ++
 2 files changed, 12 insertions(+), 14 deletions(-)
drivers/scsi/ufs/ufshcd.c +10 -14
index f4fcaee41dc26..b3dee24917a86 100644
@@ -4809,7 +4809,7 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		break;
 	} /* end of switch */
 
-	if (host_byte(result) != DID_OK)
+	if ((host_byte(result) != DID_OK) && !hba->silence_err_logs)
 		ufshcd_print_trs(hba, 1 << lrbp->task_tag, true);
 	return result;
 }
@@ -5341,8 +5341,8 @@ static void ufshcd_err_handler(struct work_struct *work)
 
 	/*
 	 * if host reset is required then skip clearing the pending
-	 * transfers forcefully because they will automatically get
-	 * cleared after link startup.
+	 * transfers forcefully because they will get cleared during
+	 * host reset and restore
 	 */
 	if (needs_reset)
 		goto skip_pending_xfer_clear;
@@ -5996,9 +5996,15 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
 	int err;
 	unsigned long flags;
 
-	/* Reset the host controller */
+	/*
+	 * Stop the host controller and complete the requests
+	 * cleared by h/w
+	 */
 	spin_lock_irqsave(hba->host->host_lock, flags);
 	ufshcd_hba_stop(hba, false);
+	hba->silence_err_logs = true;
+	ufshcd_complete_requests(hba);
+	hba->silence_err_logs = false;
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	/* scale up clocks to max frequency before full reinitialization */
@@ -6032,22 +6038,12 @@ out:
 static int ufshcd_reset_and_restore(struct ufs_hba *hba)
 {
 	int err = 0;
-	unsigned long flags;
 	int retries = MAX_HOST_RESET_RETRIES;
 
 	do {
 		err = ufshcd_host_reset_and_restore(hba);
 	} while (err && --retries);
 
-	/*
-	 * After reset the door-bell might be cleared, complete
-	 * outstanding requests in s/w here.
-	 */
-	spin_lock_irqsave(hba->host->host_lock, flags);
-	ufshcd_transfer_req_compl(hba);
-	ufshcd_tmc_handler(hba);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
-
 	return err;
 }
 
drivers/scsi/ufs/ufshcd.h +2 -0
index 33fdd3f281ae8..4554a4b725b54 100644
@@ -489,6 +489,7 @@ struct ufs_stats {
  * @uic_error: UFS interconnect layer error status
  * @saved_err: sticky error mask
  * @saved_uic_err: sticky UIC error mask
+ * @silence_err_logs: flag to silence error logs
  * @dev_cmd: ufs device management command information
  * @last_dme_cmd_tstamp: time stamp of the last completed DME command
  * @auto_bkops_enabled: to track whether bkops is enabled in device
@@ -645,6 +646,7 @@ struct ufs_hba {
 	u32 saved_err;
 	u32 saved_uic_err;
 	struct ufs_stats ufs_stats;
+	bool silence_err_logs;
 
 	/* Device management request data */
 	struct ufs_dev_cmd dev_cmd;
Signature · 1 line
2.20.1
author maintainer
#92 lore raw

PATCH 82/191 scsi: aic7xxx: Adjust indentation in ahc_find_syncrate

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit 4dbc96ad65c45cdd4e895ed7ae4c151b780790c5 ]

Clang warns:

../drivers/scsi/aic7xxx/aic7xxx_core.c:2317:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]

                        if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
                        ^
../drivers/scsi/aic7xxx/aic7xxx_core.c:2310:4: note: previous statement
is here
                        if (syncrate == &ahc_syncrates[maxsync])
                        ^

1 warning generated.

This warning occurs because there is a space amongst the tabs on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns.

This has been a problem since the beginning of git history hence no fixes tag.

---
 drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/aic7xxx/aic7xxx_core.c +1 -1
index 915a34f141e4f..49e02e8745533 100644
@@ -2321,7 +2321,7 @@ ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
 			 * At some speeds, we only support
 			 * ST transfers.
 			 */
-		 	if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
+			if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
 				*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
 			break;
 		}
Signature · 1 line
2.20.1
author maintainer
#93 lore raw

PATCH 83/191 drm/mediatek: handle events when enabling/disabling crtc

In reply to Greg Kroah-Hartman

From: Bibby Hsieh <[email protected]>

[ Upstream commit 411f5c1eacfebb1f6e40b653d29447cdfe7282aa ]

The driver currently handles vblank events only when updating planes on an already enabled CRTC. The atomic update API however allows requesting an event when enabling or disabling a CRTC. This currently leads to event objects being leaked in the kernel and to events not being sent out. Fix it.

---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/gpu/drm/mediatek/mtk_drm_crtc.c +8 -0
index 92ecb9bf982cf..b86ee7d25af36 100644
@@ -308,6 +308,7 @@ err_pm_runtime_put:
 static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
 {
 	struct drm_device *drm = mtk_crtc->base.dev;
+	struct drm_crtc *crtc = &mtk_crtc->base;
 	int i;
 
 	DRM_DEBUG_DRIVER("%s\n", __func__);
@@ -329,6 +330,13 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
 	mtk_disp_mutex_unprepare(mtk_crtc->mutex);
 
 	pm_runtime_put(drm->dev);
+
+	if (crtc->state->event && !crtc->state->active) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		crtc->state->event = NULL;
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
 }
 
 static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 84/191 ARM: dts: r8a7779: Add device node for ARM global timer

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 8443ffd1bbd5be74e9b12db234746d12e8ea93e2 ]

Add a device node for the global timer, which is part of the Cortex-A9 MPCore.

The global timer can serve as an accurate (4 ns) clock source for scheduling and delay loops.

---
 arch/arm/boot/dts/r8a7779.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/r8a7779.dtsi +8 -0
index 03919714645ae..f1c9b2bc542c5 100644
@@ -68,6 +68,14 @@
 		      <0xf0000100 0x100>;
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
Signature · 1 line
2.20.1
author maintainer
#95 lore raw

PATCH 85/191 selinux: ensure we cleanup the internal AVC counters on error in avc_update()

In reply to Greg Kroah-Hartman

From: Jaihind Yadav <[email protected]>

[ Upstream commit 030b995ad9ece9fa2d218af4429c1c78c2342096 ]

In AVC update we don't call avc_node_kill() when avc_xperms_populate() fails, resulting in the avc->avc_cache.active_nodes counter having a false value. In last patch this changes was missed , so correcting it.

Fixes fa1aa143ac4a ("selinux: extended permissions for ioctls")
[PM: merge fuzz, minor description cleanup]
---
 security/selinux/avc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
security/selinux/avc.c +1 -1
index 83eef39c8a799..d52be7b9f08c8 100644
@@ -896,7 +896,7 @@ static int avc_update_node(struct selinux_avc *avc,
 	if (orig->ae.xp_node) {
 		rc = avc_xperms_populate(node, orig->ae.xp_node);
 		if (rc) {
-			kmem_cache_free(avc_node_cachep, node);
+			avc_node_kill(avc, node);
 			goto out_unlock;
 		}
 	}
Signature · 1 line
2.20.1
author maintainer
#96 lore raw

PATCH 86/191 dmaengine: Store module owner in dma_device struct

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit dae7a589c18a4d979d5f14b09374e871b995ceb1 ]

dma_chan_to_owner() dereferences the driver from the struct device to obtain the owner and call module_[get|put](). However, if the backing device is unbound before the dma_device is unregistered, the driver will be cleared and this will cause a NULL pointer dereference.

Instead, store a pointer to the owner module in the dma_device struct so the module reference can be properly put when the channel is put, even if the backing device was destroyed first.

This change helps to support a safer unbind of DMA engines. If the dma_device is unregistered in the driver's remove function, there's no guarantee that there are no existing clients and a users action may trigger the WARN_ONCE in dma_async_device_unregister() which is unlikely to leave the system in a consistent state. Instead, a better approach is to allow the backing driver to go away and fail any subsequent requests to it.

---
 drivers/dma/dmaengine.c   | 4 +++-
 include/linux/dmaengine.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)
drivers/dma/dmaengine.c +3 -1
index f1a441ab395d7..8a52a5efee4f5 100644
@@ -190,7 +190,7 @@ __dma_device_satisfies_mask(struct dma_device *device,
 
 static struct module *dma_chan_to_owner(struct dma_chan *chan)
 {
-	return chan->device->dev->driver->owner;
+	return chan->device->owner;
 }
 
 /**
@@ -923,6 +923,8 @@ int dma_async_device_register(struct dma_device *device)
 		return -EIO;
 	}
 
+	device->owner = device->dev->driver->owner;
+
 	if (dma_has_cap(DMA_MEMCPY, device->cap_mask) && !device->device_prep_dma_memcpy) {
 		dev_err(device->dev,
 			"Device claims capability %s, but op is not defined\n",
include/linux/dmaengine.h +2 -0
index 0647f436f88c2..50128c36f0b48 100644
@@ -686,6 +686,7 @@ struct dma_filter {
  * @fill_align: alignment shift for memset operations
  * @dev_id: unique device ID
  * @dev: struct device reference for dma mapping api
+ * @owner: owner module (automatically set based on the provided dev)
  * @src_addr_widths: bit mask of src addr widths the device supports
  *	Width is specified in bytes, e.g. for a device supporting
  *	a width of 4 the mask should have BIT(4) set.
@@ -749,6 +750,7 @@ struct dma_device {
 
 	int dev_id;
 	struct device *dev;
+	struct module *owner;
 
 	u32 src_addr_widths;
 	u32 dst_addr_widths;
Signature · 1 line
2.20.1
author maintainer
#97 lore raw

PATCH 87/191 dmaengine: imx-sdma: Fix memory leak

In reply to Greg Kroah-Hartman

From: Sascha Hauer <[email protected]>

[ Upstream commit 02939cd167095f16328a1bd5cab5a90b550606df ]

The current descriptor is not on any list of the virtual DMA channel. Once sdma_terminate_all() is called when a descriptor is currently in flight then this one is forgotten to be freed. We have to call vchan_terminate_vdesc() on this descriptor to re-add it to the lists. Now that we also free the currently running descriptor we can (and actually have to) remove the current descriptor from its list also for the cyclic case.

---
 drivers/dma/imx-sdma.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
drivers/dma/imx-sdma.c +11 -8
index ceb82e74f5b4e..d66a7fdff898e 100644
@@ -738,12 +738,8 @@ static void sdma_start_desc(struct sdma_channel *sdmac)
 		return;
 	}
 	sdmac->desc = desc = to_sdma_desc(&vd->tx);
-	/*
-	 * Do not delete the node in desc_issued list in cyclic mode, otherwise
-	 * the desc allocated will never be freed in vchan_dma_desc_free_list
-	 */
-	if (!(sdmac->flags & IMX_DMA_SG_LOOP))
-		list_del(&vd->node);
+
+	list_del(&vd->node);
 
 	sdma->channel_control[channel].base_bd_ptr = desc->bd_phys;
 	sdma->channel_control[channel].current_bd_ptr = desc->bd_phys;
@@ -1044,7 +1040,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 
 	spin_lock_irqsave(&sdmac->vc.lock, flags);
 	vchan_get_all_descriptors(&sdmac->vc, &head);
-	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
 }
@@ -1052,11 +1047,19 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 static int sdma_disable_channel_async(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdmac->vc.lock, flags);
 
 	sdma_disable_channel(chan);
 
-	if (sdmac->desc)
+	if (sdmac->desc) {
+		vchan_terminate_vdesc(&sdmac->desc->vd);
+		sdmac->desc = NULL;
 		schedule_work(&sdmac->terminate_worker);
+	}
+
+	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#98 lore raw

PATCH 88/191 crypto: chtls - Fixed memory leak

In reply to Greg Kroah-Hartman

From: Vinay Kumar Yadav <[email protected]>

[ Upstream commit 93e23eb2ed6c11b4f483c8111ac155ec2b1f3042 ]

Freed work request skbs when connection terminates. enqueue_wr()/ dequeue_wr() is shared between softirq and application contexts, should be protected by socket lock. Moved dequeue_wr() to appropriate file.

---
 drivers/crypto/chelsio/chtls/chtls_cm.c | 27 +++++++++++++------------
 drivers/crypto/chelsio/chtls/chtls_cm.h | 21 +++++++++++++++++++
 drivers/crypto/chelsio/chtls/chtls_hw.c |  3 +++
 3 files changed, 38 insertions(+), 13 deletions(-)
drivers/crypto/chelsio/chtls/chtls_cm.c +14 -13
index 8b749c721c871..28d24118c6450 100644
@@ -731,6 +731,14 @@ static int chtls_close_listsrv_rpl(struct chtls_dev *cdev, struct sk_buff *skb)
 	return 0;
 }
 
+static void chtls_purge_wr_queue(struct sock *sk)
+{
+	struct sk_buff *skb;
+
+	while ((skb = dequeue_wr(sk)) != NULL)
+		kfree_skb(skb);
+}
+
 static void chtls_release_resources(struct sock *sk)
 {
 	struct chtls_sock *csk = rcu_dereference_sk_user_data(sk);
@@ -745,6 +753,11 @@ static void chtls_release_resources(struct sock *sk)
 	kfree_skb(csk->txdata_skb_cache);
 	csk->txdata_skb_cache = NULL;
 
+	if (csk->wr_credits != csk->wr_max_credits) {
+		chtls_purge_wr_queue(sk);
+		chtls_reset_wr_list(csk);
+	}
+
 	if (csk->l2t_entry) {
 		cxgb4_l2t_release(csk->l2t_entry);
 		csk->l2t_entry = NULL;
@@ -1714,6 +1727,7 @@ static void chtls_peer_close(struct sock *sk, struct sk_buff *skb)
 		else
 			sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
 	}
+	kfree_skb(skb);
 }
 
 static void chtls_close_con_rpl(struct sock *sk, struct sk_buff *skb)
@@ -2041,19 +2055,6 @@ rel_skb:
 	return 0;
 }
 
-static struct sk_buff *dequeue_wr(struct sock *sk)
-{
-	struct chtls_sock *csk = rcu_dereference_sk_user_data(sk);
-	struct sk_buff *skb = csk->wr_skb_head;
-
-	if (likely(skb)) {
-	/* Don't bother clearing the tail */
-		csk->wr_skb_head = WR_SKB_CB(skb)->next_wr;
-		WR_SKB_CB(skb)->next_wr = NULL;
-	}
-	return skb;
-}
-
 static void chtls_rx_ack(struct sock *sk, struct sk_buff *skb)
 {
 	struct cpl_fw4_ack *hdr = cplhdr(skb) + RSS_HDR;
drivers/crypto/chelsio/chtls/chtls_cm.h +21 -0
index 78eb3afa3a80d..4282d8a4eae48 100644
@@ -188,6 +188,12 @@ static inline void chtls_kfree_skb(struct sock *sk, struct sk_buff *skb)
 	kfree_skb(skb);
 }
 
+static inline void chtls_reset_wr_list(struct chtls_sock *csk)
+{
+	csk->wr_skb_head = NULL;
+	csk->wr_skb_tail = NULL;
+}
+
 static inline void enqueue_wr(struct chtls_sock *csk, struct sk_buff *skb)
 {
 	WR_SKB_CB(skb)->next_wr = NULL;
@@ -200,4 +206,19 @@ static inline void enqueue_wr(struct chtls_sock *csk, struct sk_buff *skb)
 		WR_SKB_CB(csk->wr_skb_tail)->next_wr = skb;
 	csk->wr_skb_tail = skb;
 }
+
+static inline struct sk_buff *dequeue_wr(struct sock *sk)
+{
+	struct chtls_sock *csk = rcu_dereference_sk_user_data(sk);
+	struct sk_buff *skb = NULL;
+
+	skb = csk->wr_skb_head;
+
+	if (likely(skb)) {
+	 /* Don't bother clearing the tail */
+		csk->wr_skb_head = WR_SKB_CB(skb)->next_wr;
+		WR_SKB_CB(skb)->next_wr = NULL;
+	}
+	return skb;
+}
 #endif
drivers/crypto/chelsio/chtls/chtls_hw.c +3 -0
index 4909607558644..64d24823c65aa 100644
@@ -361,6 +361,7 @@ int chtls_setkey(struct chtls_sock *csk, u32 keylen, u32 optname)
 	kwr->sc_imm.cmd_more = cpu_to_be32(ULPTX_CMD_V(ULP_TX_SC_IMM));
 	kwr->sc_imm.len = cpu_to_be32(klen);
 
+	lock_sock(sk);
 	/* key info */
 	kctx = (struct _key_ctx *)(kwr + 1);
 	ret = chtls_key_info(csk, kctx, keylen, optname);
@@ -399,8 +400,10 @@ int chtls_setkey(struct chtls_sock *csk, u32 keylen, u32 optname)
 		csk->tlshws.txkey = keyid;
 	}
 
+	release_sock(sk);
 	return ret;
 out_notcb:
+	release_sock(sk);
 	free_tls_keyid(sk);
 out_nokey:
 	kfree_skb(skb);
Signature · 1 line
2.20.1
author maintainer
#99 lore raw

PATCH 89/191 x86/vdso: Provide missing include file

In reply to Greg Kroah-Hartman

From: Valdis Klētnieks <[email protected]>

[ Upstream commit bff47c2302cc249bcd550b17067f8dddbd4b6f77 ]

When building with C=1, sparse issues a warning:

CHECK arch/x86/entry/vdso/vdso32-setup.c
arch/x86/entry/vdso/vdso32-setup.c:28:28: warning: symbol 'vdso32_enabled' was not declared. Should it be static?

Provide the missing header file.

---
 arch/x86/entry/vdso/vdso32-setup.c | 1 +
 1 file changed, 1 insertion(+)
arch/x86/entry/vdso/vdso32-setup.c +1 -0
index 42d4c89f990ed..ddff0ca6f5098 100644
@@ -11,6 +11,7 @@
 #include <linux/smp.h>
 #include <linux/kernel.h>
 #include <linux/mm_types.h>
+#include <linux/elf.h>
 
 #include <asm/processor.h>
 #include <asm/vdso.h>
Signature · 1 line
2.20.1
author maintainer
#100 lore raw

PATCH 90/191 PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency

In reply to Greg Kroah-Hartman

From: Chanwoo Choi <[email protected]>

[ Upstream commit eff5d31f7407fa9d31fb840106f1593399457298 ]

To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent the build break.

---
 drivers/devfreq/Kconfig       | 3 ++-
 drivers/devfreq/event/Kconfig | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/devfreq/Kconfig +2 -1
index 6a172d338f6dc..4c4ec68b0566d 100644
@@ -103,7 +103,8 @@ config ARM_TEGRA_DEVFREQ
 
 config ARM_RK3399_DMC_DEVFREQ
 	tristate "ARM RK3399 DMC DEVFREQ Driver"
-	depends on ARCH_ROCKCHIP
+	depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \
+		(COMPILE_TEST && HAVE_ARM_SMCCC)
 	select DEVFREQ_EVENT_ROCKCHIP_DFI
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_DEVFREQ_EVENT
drivers/devfreq/event/Kconfig +1 -1
index cd949800eed96..8851bc4e8e3e1 100644
@@ -33,7 +33,7 @@ config DEVFREQ_EVENT_EXYNOS_PPMU
 
 config DEVFREQ_EVENT_ROCKCHIP_DFI
 	tristate "ROCKCHIP DFI DEVFREQ event Driver"
-	depends on ARCH_ROCKCHIP
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	help
 	  This add the devfreq-event driver for Rockchip SoC. It provides DFI
 	  (DDR Monitor Module) driver to count ddr load.
Signature · 1 line
2.20.1
author maintainer
#101 lore raw

PATCH 91/191 pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs.

A closer look reveals other issues:
- Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks,
- Several configurations are missing.

Fix this by:
- Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs,
- Adding all missing enum IDs and marks,
- Use the right (*_PJ2x) variants for alternative pins,
- Adding all missing configurations to pinmux_data[],
- Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
[1] Table 1.4 List of Pins
[2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel),
[3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel),
[4] Table 48.3 Multiplexed Pins (Port B),
[5] Table 48.4 Multiplexed Pins (Port C),
[6] Table 48.10 Multiplexed Pins (Port J),
[7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

---
 arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++--
 drivers/pinctrl/sh-pfc/pfc-sh7269.c   | 39 ++++++++++++++++++---------
 2 files changed, 36 insertions(+), 14 deletions(-)
arch/sh/include/cpu-sh2a/cpu/sh7269.h +9 -2
index d516e5d488180..b887cc402b712 100644
@@ -78,8 +78,15 @@ enum {
 	GPIO_FN_WDTOVF,
 
 	/* CAN */
-	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
-	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
 
 	/* DMAC */
 	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
drivers/pinctrl/sh-pfc/pfc-sh7269.c +27 -12
index cfdb4fc177c3e..3df0c0d139d08 100644
@@ -740,13 +740,12 @@ enum {
 	CRX0_MARK, CTX0_MARK,
 	CRX1_MARK, CTX1_MARK,
 	CRX2_MARK, CTX2_MARK,
-	CRX0_CRX1_MARK,
-	CRX0_CRX1_CRX2_MARK,
-	CTX0CTX1CTX2_MARK,
+	CRX0_CRX1_MARK, CTX0_CTX1_MARK,
+	CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
 	CRX1_PJ22_MARK, CTX1_PJ23_MARK,
 	CRX2_PJ20_MARK, CTX2_PJ21_MARK,
-	CRX0CRX1_PJ22_MARK,
-	CRX0CRX1CRX2_PJ20_MARK,
+	CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
+	CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
 
 	/* VDC */
 	DV_CLK_MARK,
@@ -824,6 +823,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CS3_MARK, PC8MD_001),
 	PINMUX_DATA(TXD7_MARK, PC8MD_010),
 	PINMUX_DATA(CTX1_MARK, PC8MD_011),
+	PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
 
 	PINMUX_DATA(PC7_DATA, PC7MD_000),
 	PINMUX_DATA(CKE_MARK, PC7MD_001),
@@ -836,11 +836,12 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CAS_MARK, PC6MD_001),
 	PINMUX_DATA(SCK7_MARK, PC6MD_010),
 	PINMUX_DATA(CTX0_MARK, PC6MD_011),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
 
 	PINMUX_DATA(PC5_DATA, PC5MD_000),
 	PINMUX_DATA(RAS_MARK, PC5MD_001),
 	PINMUX_DATA(CRX0_MARK, PC5MD_011),
-	PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
 	PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
 
 	PINMUX_DATA(PC4_DATA, PC4MD_00),
@@ -1292,30 +1293,32 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
 	PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
-	PINMUX_DATA(CTX1_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
 
 	PINMUX_DATA(PJ22_DATA, PJ22MD_000),
 	PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
 	PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
 	PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
-	PINMUX_DATA(CRX1_MARK, PJ22MD_101),
-	PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110),
+	PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
+	PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
 
 	PINMUX_DATA(PJ21_DATA, PJ21MD_000),
 	PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
 	PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
-	PINMUX_DATA(CTX2_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
 
 	PINMUX_DATA(PJ20_DATA, PJ20MD_000),
 	PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
 	PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
 	PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
-	PINMUX_DATA(CRX2_MARK, PJ20MD_101),
-	PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110),
+	PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
+	PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
 
 	PINMUX_DATA(PJ19_DATA, PJ19MD_000),
 	PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
@@ -1666,12 +1669,24 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(WDTOVF),
 
 	/* CAN */
+	GPIO_FN(CTX2),
+	GPIO_FN(CRX2),
 	GPIO_FN(CTX1),
 	GPIO_FN(CRX1),
 	GPIO_FN(CTX0),
 	GPIO_FN(CRX0),
+	GPIO_FN(CTX0_CTX1),
 	GPIO_FN(CRX0_CRX1),
+	GPIO_FN(CTX0_CTX1_CTX2),
 	GPIO_FN(CRX0_CRX1_CRX2),
+	GPIO_FN(CTX2_PJ21),
+	GPIO_FN(CRX2_PJ20),
+	GPIO_FN(CTX1_PJ23),
+	GPIO_FN(CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_PJ23),
+	GPIO_FN(CRX0_CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_CTX2_PJ21),
+	GPIO_FN(CRX0_CRX1_CRX2_PJ20),
 
 	/* DMAC */
 	GPIO_FN(TEND0),
Signature · 1 line
2.20.1
author maintainer
#102 lore raw

PATCH 92/191 reset: uniphier: Add SCSSI reset control for each channel

In reply to Greg Kroah-Hartman

From: Kunihiko Hayashi <[email protected]>

[ Upstream commit f4aec227e985e31d2fdc5608daf48e3de19157b7 ]

SCSSI has reset controls for each channel in the SoCs newer than Pro4, so this adds missing reset controls for channel 1, 2 and 3. And more, this moves MCSSI reset ID after SCSSI.

Fixes 6b39fd590aeb ("reset: uniphier: add reset control support for SPI")
---
 drivers/reset/reset-uniphier.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/reset/reset-uniphier.c +8 -5
index 5605745663ae0..adbecb2c7cd3a 100644
@@ -202,8 +202,8 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
 #define UNIPHIER_PERI_RESET_FI2C(id, ch)		\
 	UNIPHIER_RESETX((id), 0x114, 24 + (ch))
 
-#define UNIPHIER_PERI_RESET_SCSSI(id)			\
-	UNIPHIER_RESETX((id), 0x110, 17)
+#define UNIPHIER_PERI_RESET_SCSSI(id, ch)		\
+	UNIPHIER_RESETX((id), 0x110, 17 + (ch))
 
 #define UNIPHIER_PERI_RESET_MCSSI(id)			\
 	UNIPHIER_RESETX((id), 0x114, 14)
@@ -218,7 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_I2C(6, 2),
 	UNIPHIER_PERI_RESET_I2C(7, 3),
 	UNIPHIER_PERI_RESET_I2C(8, 4),
-	UNIPHIER_PERI_RESET_SCSSI(11),
+	UNIPHIER_PERI_RESET_SCSSI(11, 0),
 	UNIPHIER_RESET_END,
 };
 
@@ -234,8 +234,11 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_FI2C(8, 4),
 	UNIPHIER_PERI_RESET_FI2C(9, 5),
 	UNIPHIER_PERI_RESET_FI2C(10, 6),
-	UNIPHIER_PERI_RESET_SCSSI(11),
-	UNIPHIER_PERI_RESET_MCSSI(12),
+	UNIPHIER_PERI_RESET_SCSSI(11, 0),
+	UNIPHIER_PERI_RESET_SCSSI(12, 1),
+	UNIPHIER_PERI_RESET_SCSSI(13, 2),
+	UNIPHIER_PERI_RESET_SCSSI(14, 3),
+	UNIPHIER_PERI_RESET_MCSSI(15),
 	UNIPHIER_RESET_END,
 };
 
Signature · 1 line
2.20.1
author maintainer
#103 lore raw

PATCH 93/191 RDMA/rxe: Fix error type of mmap_offset

In reply to Greg Kroah-Hartman

From: Jiewei Ke <[email protected]>

[ Upstream commit 6ca18d8927d468c763571f78c9a7387a69ffa020 ]

The type of mmap_offset should be u64 instead of int to match the type of mminfo.offset. If otherwise, after we create several thousands of CQs, it will run into overflow issues.

---
 drivers/infiniband/sw/rxe/rxe_verbs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/sw/rxe/rxe_verbs.h +1 -1
index 6a75f96b90962..b4e24362edbb0 100644
@@ -407,7 +407,7 @@ struct rxe_dev {
 	struct list_head	pending_mmaps;
 
 	spinlock_t		mmap_offset_lock; /* guard mmap_offset */
-	int			mmap_offset;
+	u64			mmap_offset;
 
 	atomic64_t		stats_counters[RXE_NUM_OF_COUNTERS];
 
Signature · 1 line
2.20.1
author maintainer
#104 lore raw

PATCH 94/191 clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock

In reply to Greg Kroah-Hartman

From: Icenowy Zheng <[email protected]>

[ Upstream commit ec97faff743b398e21f74a54c81333f3390093aa ]

The A64 PLL_CPU clock has the same instability if some factor changed without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33, H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the problem.

Fixes c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)
drivers/clk/sunxi-ng/ccu-sun50i-a64.c +27 -1
index dec4a130390a3..9ac6c299e0744 100644
@@ -901,11 +901,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_a64_ccu_resets),
 };
 
+static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = {
+	.common	= &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
+static struct ccu_mux_nb sun50i_a64_cpu_nb = {
+	.common		= &cpux_clk.common,
+	.cm		= &cpux_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
 static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	void __iomem *reg;
 	u32 val;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
@@ -919,7 +934,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 
 	writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	if (ret)
+		return ret;
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun50i_a64_cpu_nb);
+
+	return 0;
 }
 
 static const struct of_device_id sun50i_a64_ccu_ids[] = {
Signature · 1 line
2.20.1
author maintainer
#105 lore raw

PATCH 95/191 ALSA: sh: Fix unused variable warnings

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 5da116f164ce265e397b8f59af5c39e4a61d61a5 ]

Remove unused variables that are left over after the conversion of new PCM ops:
sound/sh/sh_dac_audio.c:166:26: warning: unused variable 'runtime' sound/sh/sh_dac_audio.c:186:26: warning: unused variable 'runtime' sound/sh/sh_dac_audio.c:205:26: warning: unused variable 'runtime'

Fixes 1cc2f8ba0b3e ("ALSA: sh: Convert to the new PCM ops")
---
 sound/sh/sh_dac_audio.c | 3 ---
 1 file changed, 3 deletions(-)
sound/sh/sh_dac_audio.c +0 -3
index 834b2574786f5..6251b5e1b64a2 100644
@@ -190,7 +190,6 @@ static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
 {
 	/* channel is not used (interleaved data) */
 	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	if (copy_from_user_toio(chip->data_buffer + pos, src, count))
 		return -EFAULT;
@@ -210,7 +209,6 @@ static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
 {
 	/* channel is not used (interleaved data) */
 	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	memcpy_toio(chip->data_buffer + pos, src, count);
 	chip->buffer_end = chip->data_buffer + pos + count;
@@ -229,7 +227,6 @@ static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
 {
 	/* channel is not used (interleaved data) */
 	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	memset_io(chip->data_buffer + pos, 0, count);
 	chip->buffer_end = chip->data_buffer + pos + count;
Signature · 1 line
2.20.1
author maintainer
#106 lore raw

PATCH 96/191 clk: uniphier: Add SCSSI clock gate for each channel

In reply to Greg Kroah-Hartman

From: Kunihiko Hayashi <[email protected]>

[ Upstream commit 1ec09a2ec67a0baa46a3ccac041dbcdbc6db2cb9 ]

SCSSI has clock gates for each channel in the SoCs newer than Pro4, so this adds missing clock gates for channel 1, 2 and 3. And more, this moves MCSSI clock ID after SCSSI.

Fixes ff388ee36516 ("clk: uniphier: add clock frequency support for SPI")
---
 drivers/clk/uniphier/clk-uniphier-peri.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/clk/uniphier/clk-uniphier-peri.c +8 -5
index 89b3ac378b3f9..8b75dc116a98c 100644
@@ -27,8 +27,8 @@
 #define UNIPHIER_PERI_CLK_FI2C(idx, ch)					\
 	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
 
-#define UNIPHIER_PERI_CLK_SCSSI(idx)					\
-	UNIPHIER_CLK_GATE("scssi", (idx), "spi", 0x20, 17)
+#define UNIPHIER_PERI_CLK_SCSSI(idx, ch)				\
+	UNIPHIER_CLK_GATE("scssi" #ch, (idx), "spi", 0x20, 17 + (ch))
 
 #define UNIPHIER_PERI_CLK_MCSSI(idx)					\
 	UNIPHIER_CLK_GATE("mcssi", (idx), "spi", 0x24, 14)
@@ -44,7 +44,7 @@ const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
 	UNIPHIER_PERI_CLK_I2C(6, 2),
 	UNIPHIER_PERI_CLK_I2C(7, 3),
 	UNIPHIER_PERI_CLK_I2C(8, 4),
-	UNIPHIER_PERI_CLK_SCSSI(11),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
 	{ /* sentinel */ }
 };
 
@@ -60,7 +60,10 @@ const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
 	UNIPHIER_PERI_CLK_FI2C(8, 4),
 	UNIPHIER_PERI_CLK_FI2C(9, 5),
 	UNIPHIER_PERI_CLK_FI2C(10, 6),
-	UNIPHIER_PERI_CLK_SCSSI(11),
-	UNIPHIER_PERI_CLK_MCSSI(12),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	UNIPHIER_PERI_CLK_SCSSI(12, 1),
+	UNIPHIER_PERI_CLK_SCSSI(13, 2),
+	UNIPHIER_PERI_CLK_SCSSI(14, 3),
+	UNIPHIER_PERI_CLK_MCSSI(15),
 	{ /* sentinel */ }
 };
Signature · 1 line
2.20.1
author maintainer
#107 lore raw

PATCH 97/191 ALSA: sh: Fix compile warning wrt const

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit f1dd4795b1523fbca7ab4344dd5a8bb439cc770d ]

A long-standing compile warning was seen during build test:
sound/sh/aica.c: In function 'load_aica_firmware':
sound/sh/aica.c:521:25: warning: passing argument 2 of 'spu_memload' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Fixes 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
---
 sound/sh/aica.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/sh/aica.c +2 -2
index ad3f71358486a..69ac44b335602 100644
@@ -117,10 +117,10 @@ static void spu_memset(u32 toi, u32 what, int length)
 }
 
 /* spu_memload - write to SPU address space */
-static void spu_memload(u32 toi, void *from, int length)
+static void spu_memload(u32 toi, const void *from, int length)
 {
 	unsigned long flags;
-	u32 *froml = from;
+	const u32 *froml = from;
 	u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
 	int i;
 	u32 val;
Signature · 1 line
2.20.1
author maintainer
#108 lore raw

PATCH 98/191 tools lib api fs: Fix gcc9 stringop-truncation compilation error

In reply to Greg Kroah-Hartman

From: Andrey Zhizhikin <[email protected]>

[ Upstream commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 ]

GCC9 introduced string hardening mechanisms, which exhibits the error during fs api compilation:

error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation]

This comes when the length of copy passed to strncpy is is equal to destination size, which could potentially lead to buffer overflow.

There is a need to mitigate this potential issue by limiting the size of destination by 1 and explicitly terminate the destination with NULL.

---
 tools/lib/api/fs/fs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/lib/api/fs/fs.c +3 -1
index 7aba8243a0e7c..bd021a0eeef8c 100644
@@ -210,6 +210,7 @@ static bool fs__env_override(struct fs *fs)
 	size_t name_len = strlen(fs->name);
 	/* name + "_PATH" + '\0' */
 	char upper_name[name_len + 5 + 1];
+
 	memcpy(upper_name, fs->name, name_len);
 	mem_toupper(upper_name, name_len);
 	strcpy(&upper_name[name_len], "_PATH");
@@ -219,7 +220,8 @@ static bool fs__env_override(struct fs *fs)
 		return false;
 
 	fs->found = true;
-	strncpy(fs->path, override_path, sizeof(fs->path));
+	strncpy(fs->path, override_path, sizeof(fs->path) - 1);
+	fs->path[sizeof(fs->path) - 1] = '\0';
 	return true;
 }
 
Signature · 1 line
2.20.1
author maintainer
#109 lore raw

PATCH 99/191 x86/unwind/orc: Fix !CONFIG_MODULES build warning

In reply to Greg Kroah-Hartman

From: Shile Zhang <[email protected]>

[ Upstream commit 22a7fa8848c5e881d87ef2f7f3c2ea77b286e6f9 ]

To fix follwowing warning due to ORC sort moved to build time:

arch/x86/kernel/unwind_orc.c:210:12: warning: ‘orc_sort_cmp’ defined but not used [-Wunused-function] arch/x86/kernel/unwind_orc.c:190:13: warning: ‘orc_sort_swap’ defined but not used [-Wunused-function]

---
 arch/x86/kernel/unwind_orc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/kernel/unwind_orc.c +2 -1
index 89be1be1790c4..a3cb70fbe941a 100644
@@ -176,6 +176,8 @@ static struct orc_entry *orc_find(unsigned long ip)
 	return orc_ftrace_find(ip);
 }
 
+#ifdef CONFIG_MODULES
+
 static void orc_sort_swap(void *_a, void *_b, int size)
 {
 	struct orc_entry *orc_a, *orc_b;
@@ -218,7 +220,6 @@ static int orc_sort_cmp(const void *_a, const void *_b)
 	return orc_a->sp_reg == ORC_REG_UNDEFINED && !orc_a->end ? -1 : 1;
 }
 
-#ifdef CONFIG_MODULES
 void unwind_module_init(struct module *mod, void *_orc_ip, size_t orc_ip_size,
 			void *_orc, size_t orc_size)
 {
Signature · 1 line
2.20.1
author maintainer
#110 lore raw

PATCH 100/191 ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch

In reply to Greg Kroah-Hartman

From: Jason Ekstrand <[email protected]>

[ Upstream commit 0528904926aab19bffb2068879aa44db166c6d5f ]

Running evemu-record on the lid switch event shows that the lid reports the first "close" but then never reports an "open". This causes systemd to continuously re-suspend the laptop every 30s. Resetting the _LID to "open" fixes the issue.

---
 drivers/acpi/button.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/acpi/button.c +11 -0
index a25d77b3a16ad..d5c19e25ddf59 100644
@@ -102,6 +102,17 @@ static const struct dmi_system_id lid_blacklst[] = {
 		},
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
 	},
+	{
+		/*
+		 * Razer Blade Stealth 13 late 2019, notification of the LID device
+		 * only happens on close, not on open and _LID always returns closed.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Razer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Razer Blade Stealth 13 Late 2019"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+	},
 	{}
 };
 
Signature · 1 line
2.20.1
author maintainer
#111 lore raw

PATCH 101/191 mlx5: work around high stack usage with gcc

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 42ae1a5c76691928ed217c7e40269db27f5225e9 ]

In some configurations, gcc tries too hard to optimize this code:

drivers/net/ethernet/mellanox/mlx5/core/en_stats.c: In function 'mlx5e_grp_sw_update_stats':
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c:302:1: error: the frame size of 1336 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

As was stated in the bug report, the reason is that gcc runs into a corner case in the register allocator that is rather hard to fix in a good way.

As there is an easy way to work around it, just add a comment and the barrier that stops gcc from trying to overoptimize the function.

---
 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +3 -0
index 8255d797ea943..9a68dee588c1a 100644
@@ -211,6 +211,9 @@ void mlx5e_grp_sw_update_stats(struct mlx5e_priv *priv)
 			s->tx_tls_resync_bytes	+= sq_stats->tls_resync_bytes;
 #endif
 			s->tx_cqes		+= sq_stats->cqes;
+
+			/* https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92657 */
+			barrier();
 		}
 	}
 
Signature · 1 line
2.20.1
author maintainer
#112 lore raw

PATCH 102/191 drm: remove the newline for CRC source name.

In reply to Greg Kroah-Hartman

From: Dingchen Zhang <[email protected]>

[ Upstream commit 72a848f5c46bab4c921edc9cbffd1ab273b2be17 ]

userspace may transfer a newline, and this terminating newline is replaced by a '\0' to avoid followup issues.

'len-1' is the index to replace the newline of CRC source name.

v3: typo fix (Sam)

v2: update patch subject, body and format. (Sam)

---
 drivers/gpu/drm/drm_debugfs_crc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_debugfs_crc.c +2 -2
index c88e5ff41add6..a3c756710845e 100644
@@ -101,8 +101,8 @@ static ssize_t crc_control_write(struct file *file, const char __user *ubuf,
 	if (IS_ERR(source))
 		return PTR_ERR(source);
 
-	if (source[len] == '\n')
-		source[len] = '\0';
+	if (source[len - 1] == '\n')
+		source[len - 1] = '\0';
 
 	spin_lock_irq(&crc->lock);
 
Signature · 1 line
2.20.1
author maintainer
#113 lore raw

PATCH 103/191 ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco

In reply to Greg Kroah-Hartman

From: Benjamin Gaignard <[email protected]>

[ Upstream commit 0ff15a86d0c5a3f004fee2e92d65b88e56a3bc58 ]

Add a fixed regulator and use it as power supply for DSI panel.

Fixes 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco")
---
 arch/arm/boot/dts/stm32f469-disco.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/stm32f469-disco.dts +8 -0
index 3ee768cb86fc9..eea979ef5512f 100644
@@ -75,6 +75,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -154,6 +161,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
 		status = "okay";
 
 		port {
Signature · 1 line
2.20.1
author maintainer
#114 lore raw

PATCH 104/191 usbip: Fix unsafe unaligned pointer usage

In reply to Greg Kroah-Hartman

From: Shuah Khan <[email protected]>

[ Upstream commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e ]

Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool build fails with new gcc -Werror=address-of-packed-member checks.

usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
79 | usbip_net_pack_uint32_t(pack, &udev->busnum);

Fix with minor changes to pass by value instead of by address.

---
 tools/usb/usbip/src/usbip_network.c | 40 +++++++++++++++++------------
 tools/usb/usbip/src/usbip_network.h | 12 +++------
 2 files changed, 27 insertions(+), 25 deletions(-)
tools/usb/usbip/src/usbip_network.c +24 -16
index 8ffcd47d96385..902f55208e239 100644
@@ -62,39 +62,39 @@ void usbip_setup_port_number(char *arg)
 	info("using port %d (\"%s\")", usbip_port, usbip_port_string);
 }
 
-void usbip_net_pack_uint32_t(int pack, uint32_t *num)
+uint32_t usbip_net_pack_uint32_t(int pack, uint32_t num)
 {
 	uint32_t i;
 
 	if (pack)
-		i = htonl(*num);
+		i = htonl(num);
 	else
-		i = ntohl(*num);
+		i = ntohl(num);
 
-	*num = i;
+	return i;
 }
 
-void usbip_net_pack_uint16_t(int pack, uint16_t *num)
+uint16_t usbip_net_pack_uint16_t(int pack, uint16_t num)
 {
 	uint16_t i;
 
 	if (pack)
-		i = htons(*num);
+		i = htons(num);
 	else
-		i = ntohs(*num);
+		i = ntohs(num);
 
-	*num = i;
+	return i;
 }
 
 void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev)
 {
-	usbip_net_pack_uint32_t(pack, &udev->busnum);
-	usbip_net_pack_uint32_t(pack, &udev->devnum);
-	usbip_net_pack_uint32_t(pack, &udev->speed);
+	udev->busnum = usbip_net_pack_uint32_t(pack, udev->busnum);
+	udev->devnum = usbip_net_pack_uint32_t(pack, udev->devnum);
+	udev->speed = usbip_net_pack_uint32_t(pack, udev->speed);
 
-	usbip_net_pack_uint16_t(pack, &udev->idVendor);
-	usbip_net_pack_uint16_t(pack, &udev->idProduct);
-	usbip_net_pack_uint16_t(pack, &udev->bcdDevice);
+	udev->idVendor = usbip_net_pack_uint16_t(pack, udev->idVendor);
+	udev->idProduct = usbip_net_pack_uint16_t(pack, udev->idProduct);
+	udev->bcdDevice = usbip_net_pack_uint16_t(pack, udev->bcdDevice);
 }
 
 void usbip_net_pack_usb_interface(int pack __attribute__((unused)),
@@ -141,6 +141,14 @@ ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen)
 	return usbip_net_xmit(sockfd, buff, bufflen, 1);
 }
 
+static inline void usbip_net_pack_op_common(int pack,
+					    struct op_common *op_common)
+{
+	op_common->version = usbip_net_pack_uint16_t(pack, op_common->version);
+	op_common->code = usbip_net_pack_uint16_t(pack, op_common->code);
+	op_common->status = usbip_net_pack_uint32_t(pack, op_common->status);
+}
+
 int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status)
 {
 	struct op_common op_common;
@@ -152,7 +160,7 @@ int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status)
 	op_common.code    = code;
 	op_common.status  = status;
 
-	PACK_OP_COMMON(1, &op_common);
+	usbip_net_pack_op_common(1, &op_common);
 
 	rc = usbip_net_send(sockfd, &op_common, sizeof(op_common));
 	if (rc < 0) {
@@ -176,7 +184,7 @@ int usbip_net_recv_op_common(int sockfd, uint16_t *code, int *status)
 		goto err;
 	}
 
-	PACK_OP_COMMON(0, &op_common);
+	usbip_net_pack_op_common(0, &op_common);
 
 	if (op_common.version != USBIP_VERSION) {
 		err("USBIP Kernel and tool version mismatch: %d %d:",
tools/usb/usbip/src/usbip_network.h +3 -9
index 555215eae43e9..83b4c5344f721 100644
@@ -32,12 +32,6 @@ struct op_common {
 
 } __attribute__((packed));
 
-#define PACK_OP_COMMON(pack, op_common)  do {\
-	usbip_net_pack_uint16_t(pack, &(op_common)->version);\
-	usbip_net_pack_uint16_t(pack, &(op_common)->code);\
-	usbip_net_pack_uint32_t(pack, &(op_common)->status);\
-} while (0)
-
 /* ---------------------------------------------------------------------- */
 /* Dummy Code */
 #define OP_UNSPEC	0x00
@@ -163,11 +157,11 @@ struct op_devlist_reply_extra {
 } while (0)
 
 #define PACK_OP_DEVLIST_REPLY(pack, reply)  do {\
-	usbip_net_pack_uint32_t(pack, &(reply)->ndev);\
+	(reply)->ndev = usbip_net_pack_uint32_t(pack, (reply)->ndev);\
 } while (0)
 
-void usbip_net_pack_uint32_t(int pack, uint32_t *num);
-void usbip_net_pack_uint16_t(int pack, uint16_t *num);
+uint32_t usbip_net_pack_uint32_t(int pack, uint32_t num);
+uint16_t usbip_net_pack_uint16_t(int pack, uint16_t num);
 void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev);
 void usbip_net_pack_usb_interface(int pack, struct usbip_usb_interface *uinf);
 
Signature · 1 line
2.20.1
author maintainer
#115 lore raw

PATCH 105/191 udf: Fix free space reporting for metadata and virtual partitions

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit a4a8b99ec819ca60b49dc582a4287ef03411f117 ]

Free space on filesystems with metadata or virtual partition maps currently gets misreported. This is because these partitions are just remapped onto underlying real partitions from which keep track of free blocks. Take this remapping into account when counting free blocks as well.

---
 fs/udf/super.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)
fs/udf/super.c +17 -5
index 6fd0f14e9dd22..1676a175cd7a8 100644
@@ -2469,17 +2469,29 @@ static unsigned int udf_count_free_table(struct super_block *sb,
 static unsigned int udf_count_free(struct super_block *sb)
 {
 	unsigned int accum = 0;
-	struct udf_sb_info *sbi;
+	struct udf_sb_info *sbi = UDF_SB(sb);
 	struct udf_part_map *map;
+	unsigned int part = sbi->s_partition;
+	int ptype = sbi->s_partmaps[part].s_partition_type;
+
+	if (ptype == UDF_METADATA_MAP25) {
+		part = sbi->s_partmaps[part].s_type_specific.s_metadata.
+							s_phys_partition_ref;
+	} else if (ptype == UDF_VIRTUAL_MAP15 || ptype == UDF_VIRTUAL_MAP20) {
+		/*
+		 * Filesystems with VAT are append-only and we cannot write to
+ 		 * them. Let's just report 0 here.
+		 */
+		return 0;
+	}
 
-	sbi = UDF_SB(sb);
 	if (sbi->s_lvid_bh) {
 		struct logicalVolIntegrityDesc *lvid =
 			(struct logicalVolIntegrityDesc *)
 			sbi->s_lvid_bh->b_data;
-		if (le32_to_cpu(lvid->numOfPartitions) > sbi->s_partition) {
+		if (le32_to_cpu(lvid->numOfPartitions) > part) {
 			accum = le32_to_cpu(
-					lvid->freeSpaceTable[sbi->s_partition]);
+					lvid->freeSpaceTable[part]);
 			if (accum == 0xFFFFFFFF)
 				accum = 0;
 		}
@@ -2488,7 +2500,7 @@ static unsigned int udf_count_free(struct super_block *sb)
 	if (accum)
 		return accum;
 
-	map = &sbi->s_partmaps[sbi->s_partition];
+	map = &sbi->s_partmaps[part];
 	if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP) {
 		accum += udf_count_free_bitmap(sb,
 					       map->s_uspace.s_bitmap);
Signature · 1 line
2.20.1
author maintainer
#116 lore raw

PATCH 106/191 staging: rtl8188: avoid excessive stack usage

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit c497ae2077c055b85c1bf04f3d182a84bd8f365b ]

The rtl8188 copy of the os_dep support code causes a warning about a very significant stack usage in the translate_scan() function:

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'translate_scan':
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:306:1: error: the frame size of 1560 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]

Use the same trick as in the rtl8723bs copy of the same function, and allocate it dynamically.

---
 drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c +6 -3
index bee3c3a7a7a99..2db4444267a74 100644
@@ -229,18 +229,21 @@ static char *translate_scan(struct adapter *padapter,
 
 	/* parsing WPA/WPA2 IE */
 	{
-		u8 buf[MAX_WPA_IE_LEN];
+		u8 *buf;
 		u8 wpa_ie[255], rsn_ie[255];
 		u16 wpa_len = 0, rsn_len = 0;
 		u8 *p;
 
+		buf = kzalloc(MAX_WPA_IE_LEN, GFP_ATOMIC);
+		if (!buf)
+			return start;
+
 		rtw_get_sec_ie(pnetwork->network.ies, pnetwork->network.ie_length, rsn_ie, &rsn_len, wpa_ie, &wpa_len);
 		RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_wx_get_scan: ssid =%s\n", pnetwork->network.Ssid.Ssid));
 		RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_wx_get_scan: wpa_len =%d rsn_len =%d\n", wpa_len, rsn_len));
 
 		if (wpa_len > 0) {
 			p = buf;
-			memset(buf, 0, MAX_WPA_IE_LEN);
 			p += sprintf(p, "wpa_ie=");
 			for (i = 0; i < wpa_len; i++)
 				p += sprintf(p, "%02x", wpa_ie[i]);
@@ -257,7 +260,6 @@ static char *translate_scan(struct adapter *padapter,
 		}
 		if (rsn_len > 0) {
 			p = buf;
-			memset(buf, 0, MAX_WPA_IE_LEN);
 			p += sprintf(p, "rsn_ie=");
 			for (i = 0; i < rsn_len; i++)
 				p += sprintf(p, "%02x", rsn_ie[i]);
@@ -271,6 +273,7 @@ static char *translate_scan(struct adapter *padapter,
 			iwe.u.data.length = rsn_len;
 			start = iwe_stream_add_point(info, start, stop, &iwe, rsn_ie);
 		}
+		kfree(buf);
 	}
 
 	{/* parsing WPS IE */
Signature · 1 line
2.20.1
author maintainer
#117 lore raw

PATCH 107/191 IB/hfi1: Add software counter for ctxt0 seq drop

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

[ Upstream commit 5ffd048698ea5139743acd45e8ab388a683642b8 ]

All other code paths increment some form of drop counter.

This was missed in the original implementation.

Fixes 82c2611daaf0 ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
---
 drivers/infiniband/hw/hfi1/chip.c   | 10 ++++++++++
 drivers/infiniband/hw/hfi1/chip.h   |  1 +
 drivers/infiniband/hw/hfi1/driver.c |  1 +
 drivers/infiniband/hw/hfi1/hfi.h    |  2 ++
 4 files changed, 14 insertions(+)
drivers/infiniband/hw/hfi1/chip.c +10 -0
index b09a4b1cf397b..1221faea75a68 100644
@@ -1687,6 +1687,14 @@ static u64 access_sw_pio_drain(const struct cntr_entry *entry,
 	return dd->verbs_dev.n_piodrain;
 }
 
+static u64 access_sw_ctx0_seq_drop(const struct cntr_entry *entry,
+				   void *context, int vl, int mode, u64 data)
+{
+	struct hfi1_devdata *dd = context;
+
+	return dd->ctx0_seq_drop;
+}
+
 static u64 access_sw_vtx_wait(const struct cntr_entry *entry,
 			      void *context, int vl, int mode, u64 data)
 {
@@ -4247,6 +4255,8 @@ static struct cntr_entry dev_cntrs[DEV_CNTR_LAST] = {
 			    access_sw_cpu_intr),
 [C_SW_CPU_RCV_LIM] = CNTR_ELEM("RcvLimit", 0, 0, CNTR_NORMAL,
 			    access_sw_cpu_rcv_limit),
+[C_SW_CTX0_SEQ_DROP] = CNTR_ELEM("SeqDrop0", 0, 0, CNTR_NORMAL,
+			    access_sw_ctx0_seq_drop),
 [C_SW_VTX_WAIT] = CNTR_ELEM("vTxWait", 0, 0, CNTR_NORMAL,
 			    access_sw_vtx_wait),
 [C_SW_PIO_WAIT] = CNTR_ELEM("PioWait", 0, 0, CNTR_NORMAL,
drivers/infiniband/hw/hfi1/chip.h +1 -0
index 36b04d6300e54..c9a352d8a7e13 100644
@@ -909,6 +909,7 @@ enum {
 	C_DC_PG_STS_TX_MBE_CNT,
 	C_SW_CPU_INTR,
 	C_SW_CPU_RCV_LIM,
+	C_SW_CTX0_SEQ_DROP,
 	C_SW_VTX_WAIT,
 	C_SW_PIO_WAIT,
 	C_SW_PIO_DRAIN,
drivers/infiniband/hw/hfi1/driver.c +1 -0
index d5277c23cba60..769e114567a03 100644
@@ -734,6 +734,7 @@ static noinline int skip_rcv_packet(struct hfi1_packet *packet, int thread)
 {
 	int ret;
 
+	packet->rcd->dd->ctx0_seq_drop++;
 	/* Set up for the next packet */
 	packet->rhqoff += packet->rsize;
 	if (packet->rhqoff >= packet->maxcnt)
drivers/infiniband/hw/hfi1/hfi.h +2 -0
index ab981874c71cc..e38de547785d0 100644
@@ -1093,6 +1093,8 @@ struct hfi1_devdata {
 
 	char *boardname; /* human readable board info */
 
+	u64 ctx0_seq_drop;
+
 	/* reset value */
 	u64 z_int_counter;
 	u64 z_rcv_limit;
Signature · 1 line
2.20.1
author maintainer
#118 lore raw

PATCH 108/191 soc/tegra: fuse: Correct straps address for older Tegra124 device trees

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ]

Trying to read out Chip ID before APBMISC registers are mapped won't succeed, in a result Tegra124 gets a wrong address for the HW straps register if machine uses an old outdated device tree.

Fixes 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM")
---
 drivers/soc/tegra/fuse/tegra-apbmisc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/tegra/fuse/tegra-apbmisc.c +1 -1
index e5a4d8f98b10e..d1cbb0fe1691a 100644
@@ -135,7 +135,7 @@ void __init tegra_init_apbmisc(void)
 			apbmisc.flags = IORESOURCE_MEM;
 
 			/* strapping options */
-			if (tegra_get_chip_id() == TEGRA124) {
+			if (of_machine_is_compatible("nvidia,tegra124")) {
 				straps.start = 0x7000e864;
 				straps.end = 0x7000e867;
 			} else {
Signature · 1 line
2.20.1
author maintainer
#119 lore raw

PATCH 109/191 efi/x86: Dont panic or BUG() on non-critical error conditions

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

[ Upstream commit e2d68a955e49d61fd0384f23e92058dc9b79be5e ]

The logic in __efi_enter_virtual_mode() does a number of steps in sequence, all of which may fail in one way or the other. In most cases, we simply print an error and disable EFI runtime services support, but in some cases, we BUG() or panic() and bring down the system when encountering conditions that we could easily handle in the same way.

While at it, replace a pointless page-to-virt-phys conversion with one that goes straight from struct page to physical.

---
 arch/x86/platform/efi/efi.c    | 28 ++++++++++++++--------------
 arch/x86/platform/efi/efi_64.c |  9 +++++----
 2 files changed, 19 insertions(+), 18 deletions(-)
arch/x86/platform/efi/efi.c +14 -14
index 5b0275310070e..e7f19dec16b97 100644
@@ -930,16 +930,14 @@ static void __init __efi_enter_virtual_mode(void)
 
 	if (efi_alloc_page_tables()) {
 		pr_err("Failed to allocate EFI page tables\n");
-		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-		return;
+		goto err;
 	}
 
 	efi_merge_regions();
 	new_memmap = efi_map_regions(&count, &pg_shift);
 	if (!new_memmap) {
 		pr_err("Error reallocating memory, EFI runtime non-functional!\n");
-		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-		return;
+		goto err;
 	}
 
 	pa = __pa(new_memmap);
@@ -953,8 +951,7 @@ static void __init __efi_enter_virtual_mode(void)
 
 	if (efi_memmap_init_late(pa, efi.memmap.desc_size * count)) {
 		pr_err("Failed to remap late EFI memory map\n");
-		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-		return;
+		goto err;
 	}
 
 	if (efi_enabled(EFI_DBG)) {
@@ -962,12 +959,11 @@ static void __init __efi_enter_virtual_mode(void)
 		efi_print_memmap();
 	}
 
-	BUG_ON(!efi.systab);
+	if (WARN_ON(!efi.systab))
+		goto err;
 
-	if (efi_setup_page_tables(pa, 1 << pg_shift)) {
-		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-		return;
-	}
+	if (efi_setup_page_tables(pa, 1 << pg_shift))
+		goto err;
 
 	efi_sync_low_kernel_mappings();
 
@@ -987,9 +983,9 @@ static void __init __efi_enter_virtual_mode(void)
 	}
 
 	if (status != EFI_SUCCESS) {
-		pr_alert("Unable to switch EFI into virtual mode (status=%lx)!\n",
-			 status);
-		panic("EFI call to SetVirtualAddressMap() failed!");
+		pr_err("Unable to switch EFI into virtual mode (status=%lx)!\n",
+		       status);
+		goto err;
 	}
 
 	/*
@@ -1016,6 +1012,10 @@ static void __init __efi_enter_virtual_mode(void)
 
 	/* clean DUMMY object */
 	efi_delete_dummy_variable();
+	return;
+
+err:
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 }
 
 void __init efi_enter_virtual_mode(void)
arch/x86/platform/efi/efi_64.c +5 -4
index ee5d08f25ce45..6db8f3598c800 100644
@@ -389,11 +389,12 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 		return 0;
 
 	page = alloc_page(GFP_KERNEL|__GFP_DMA32);
-	if (!page)
-		panic("Unable to allocate EFI runtime stack < 4GB\n");
+	if (!page) {
+		pr_err("Unable to allocate EFI runtime stack < 4GB\n");
+		return 1;
+	}
 
-	efi_scratch.phys_stack = virt_to_phys(page_address(page));
-	efi_scratch.phys_stack += PAGE_SIZE; /* stack grows down */
+	efi_scratch.phys_stack = page_to_phys(page + 1); /* stack grows down */
 
 	npages = (_etext - _text) >> PAGE_SHIFT;
 	text = __pa(_text);
Signature · 1 line
2.20.1
author maintainer
#120 lore raw

PATCH 110/191 rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls

In reply to Greg Kroah-Hartman

From: Paul E. McKenney <[email protected]>

[ Upstream commit 860c8802ace14c646864795e057349c9fb2d60ad ]

Eric Dumazet supplied a KCSAN report of a bug that forces use of hlist_unhashed_lockless() from sk_unhashed():

------------------------------------------------------------------------

BUG: KCSAN: data-race in inet_unhash / inet_unhash

write to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 1:

 __hlist_nulls_del include/linux/list_nulls.h:88 [inline]
 hlist_nulls_del_init_rcu include/linux/rculist_nulls.h:36 [inline]
 __sk_nulls_del_node_init_rcu include/net/sock.h:676 [inline]
 inet_unhash+0x38f/0x4a0 net/ipv4/inet_hashtables.c:612
 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249
 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854
 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56
 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599
 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619
 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

read to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 0:

 sk_unhashed include/net/sock.h:607 [inline]
 inet_unhash+0x3d/0x4a0 net/ipv4/inet_hashtables.c:592
 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249
 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854
 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56
 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599
 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619
 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
 rest_init+0xec/0xf6 init/main.c:452
 arch_call_rest_init+0x17/0x37
 start_kernel+0x838/0x85e init/main.c:786
 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine,

BIOS Google 01/01/2011

------------------------------------------------------------------------

This commit therefore replaces C-language assignments with WRITE_ONCE() in include/linux/list_nulls.h and include/linux/rculist_nulls.h.

---
 include/linux/list_nulls.h    | 8 ++++----
 include/linux/rculist_nulls.h | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)
include/linux/list_nulls.h +4 -4
index 3ef96743db8da..1ecd35664e0d3 100644
@@ -72,10 +72,10 @@ static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
 	struct hlist_nulls_node *first = h->first;
 
 	n->next = first;
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 	h->first = n;
 	if (!is_a_nulls(first))
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 }
 
 static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
@@ -85,13 +85,13 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 
 	WRITE_ONCE(*pprev, next);
 	if (!is_a_nulls(next))
-		next->pprev = pprev;
+		WRITE_ONCE(next->pprev, pprev);
 }
 
 static inline void hlist_nulls_del(struct hlist_nulls_node *n)
 {
 	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
+	WRITE_ONCE(n->pprev, LIST_POISON2);
 }
 
 /**
include/linux/rculist_nulls.h +4 -4
index 61974c4c566be..90f2e2232c6d7 100644
@@ -34,7 +34,7 @@ static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
 {
 	if (!hlist_nulls_unhashed(n)) {
 		__hlist_nulls_del(n);
-		n->pprev = NULL;
+		WRITE_ONCE(n->pprev, NULL);
 	}
 }
 
@@ -66,7 +66,7 @@ static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
 static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n)
 {
 	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
+	WRITE_ONCE(n->pprev, LIST_POISON2);
 }
 
 /**
@@ -94,10 +94,10 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
 	struct hlist_nulls_node *first = h->first;
 
 	n->next = first;
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 	rcu_assign_pointer(hlist_nulls_first_rcu(h), n);
 	if (!is_a_nulls(first))
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#121 lore raw

PATCH 111/191 Input: edt-ft5x06 - work around first register access error

In reply to Greg Kroah-Hartman

From: Philipp Zabel <[email protected]>

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ]

The EP0700MLP1 returns bogus data on the first register read access (reading the threshold parameter from register 0x00):

    edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40

It ignores writes until then. This patch adds a dummy read after which the number of sensors and parameter read/writes work correctly.

---
 drivers/input/touchscreen/edt-ft5x06.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/input/touchscreen/edt-ft5x06.c +7 -0
index 1e18ca0d1b4e1..3fdaa644a82c1 100644
@@ -968,6 +968,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 {
 	const struct edt_i2c_chip_data *chip_data;
 	struct edt_ft5x06_ts_data *tsdata;
+	u8 buf[2] = { 0xfc, 0x00 };
 	struct input_dev *input;
 	unsigned long irq_flags;
 	int error;
@@ -1037,6 +1038,12 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		return error;
 	}
 
+	/*
+	 * Dummy read access. EP0700MLP1 returns bogus data on the first
+	 * register read access and ignores writes.
+	 */
+	edt_ft5x06_ts_readwrite(tsdata->client, 2, buf, 2, buf);
+
 	edt_ft5x06_ts_set_regs(tsdata);
 	edt_ft5x06_ts_get_defaults(&client->dev, tsdata);
 	edt_ft5x06_ts_get_parameters(tsdata);
Signature · 1 line
2.20.1
author maintainer
#122 lore raw

PATCH 112/191 x86/nmi: Remove irq_work from the long duration NMI handler

In reply to Greg Kroah-Hartman

From: Changbin Du <[email protected]>

[ Upstream commit 248ed51048c40d36728e70914e38bffd7821da57 ]

First, printk() is NMI-context safe now since the safe printk() has been implemented and it already has an irq_work to make NMI-context safe.

Second, this NMI irq_work actually does not work if a NMI handler causes panic by watchdog timeout. It has no chance to run in such case, while the safe printk() will flush its per-cpu buffers before panicking.

While at it, repurpose the irq_work callback into a function which concentrates the NMI duration checking and makes the code easier to follow.

[ bp: Massage. ]

---
 arch/x86/include/asm/nmi.h |  1 -
 arch/x86/kernel/nmi.c      | 20 +++++++++-----------
 2 files changed, 9 insertions(+), 12 deletions(-)
arch/x86/include/asm/nmi.h +0 -1
index 75ded1d13d98d..9d5d949e662e1 100644
@@ -41,7 +41,6 @@ struct nmiaction {
 	struct list_head	list;
 	nmi_handler_t		handler;
 	u64			max_duration;
-	struct irq_work		irq_work;
 	unsigned long		flags;
 	const char		*name;
 };
arch/x86/kernel/nmi.c +9 -11
index 086cf1d1d71d8..0f8b9b900b0e7 100644
@@ -102,18 +102,22 @@ static int __init nmi_warning_debugfs(void)
 }
 fs_initcall(nmi_warning_debugfs);
 
-static void nmi_max_handler(struct irq_work *w)
+static void nmi_check_duration(struct nmiaction *action, u64 duration)
 {
-	struct nmiaction *a = container_of(w, struct nmiaction, irq_work);
+	u64 whole_msecs = READ_ONCE(action->max_duration);
 	int remainder_ns, decimal_msecs;
-	u64 whole_msecs = READ_ONCE(a->max_duration);
+
+	if (duration < nmi_longest_ns || duration < action->max_duration)
+		return;
+
+	action->max_duration = duration;
 
 	remainder_ns = do_div(whole_msecs, (1000 * 1000));
 	decimal_msecs = remainder_ns / 1000;
 
 	printk_ratelimited(KERN_INFO
 		"INFO: NMI handler (%ps) took too long to run: %lld.%03d msecs\n",
-		a->handler, whole_msecs, decimal_msecs);
+		action->handler, whole_msecs, decimal_msecs);
 }
 
 static int nmi_handle(unsigned int type, struct pt_regs *regs)
@@ -140,11 +144,7 @@ static int nmi_handle(unsigned int type, struct pt_regs *regs)
 		delta = sched_clock() - delta;
 		trace_nmi_handler(a->handler, (int)delta, thishandled);
 
-		if (delta < nmi_longest_ns || delta < a->max_duration)
-			continue;
-
-		a->max_duration = delta;
-		irq_work_queue(&a->irq_work);
+		nmi_check_duration(a, delta);
 	}
 
 	rcu_read_unlock();
@@ -162,8 +162,6 @@ int __register_nmi_handler(unsigned int type, struct nmiaction *action)
 	if (!action->handler)
 		return -EINVAL;
 
-	init_irq_work(&action->irq_work, nmi_max_handler);
-
 	raw_spin_lock_irqsave(&desc->lock, flags);
 
 	/*
Signature · 1 line
2.20.1
#123 lore raw

Re: [PATCH 4.19 112/191] x86/nmi: Remove irq_work from the long duration NMI handler

Hi!

Quoted 7 lines · Greg Kroah-Hartman

From: Changbin Du <[email protected]>

[ Upstream commit 248ed51048c40d36728e70914e38bffd7821da57 ]

First, printk() is NMI-context safe now since the safe printk() has been implemented and it already has an irq_work to make NMI-context safe.

Quoted 7 lines

Second, this NMI irq_work actually does not work if a NMI handler causes panic by watchdog timeout. It has no chance to run in such case, while the safe printk() will flush its per-cpu buffers before panicking.

While at it, repurpose the irq_work callback into a function which concentrates the NMI duration checking and makes the code easier to follow.

I know there were printk() changes recently, but are they all in 4.19?

Does this actually fix any bug in 4.19?

Best regards,
Pavel

Quoted 53 lines
arch/x86/kernel/nmi.c +9 -11
index 086cf1d1d71d8..0f8b9b900b0e7 100644
@@ -102,18 +102,22 @@ static int __init nmi_warning_debugfs(void)
 }
 fs_initcall(nmi_warning_debugfs);
 
-static void nmi_max_handler(struct irq_work *w)
+static void nmi_check_duration(struct nmiaction *action, u64 duration)
 {
-	struct nmiaction *a = container_of(w, struct nmiaction, irq_work);
+	u64 whole_msecs = READ_ONCE(action->max_duration);
 	int remainder_ns, decimal_msecs;
-	u64 whole_msecs = READ_ONCE(a->max_duration);
+
+	if (duration < nmi_longest_ns || duration < action->max_duration)
+		return;
+
+	action->max_duration = duration;
 
 	remainder_ns = do_div(whole_msecs, (1000 * 1000));
 	decimal_msecs = remainder_ns / 1000;
 
 	printk_ratelimited(KERN_INFO
 		"INFO: NMI handler (%ps) took too long to run: %lld.%03d msecs\n",
-		a->handler, whole_msecs, decimal_msecs);
+		action->handler, whole_msecs, decimal_msecs);
 }
 
 static int nmi_handle(unsigned int type, struct pt_regs *regs)
@@ -140,11 +144,7 @@ static int nmi_handle(unsigned int type, struct pt_regs *regs)
 		delta = sched_clock() - delta;
 		trace_nmi_handler(a->handler, (int)delta, thishandled);
 
-		if (delta < nmi_longest_ns || delta < a->max_duration)
-			continue;
-
-		a->max_duration = delta;
-		irq_work_queue(&a->irq_work);
+		nmi_check_duration(a, delta);
 	}
 
 	rcu_read_unlock();
@@ -162,8 +162,6 @@ int __register_nmi_handler(unsigned int type, struct nmiaction *action)
 	if (!action->handler)
 		return -EINVAL;
 
-	init_irq_work(&action->irq_work, nmi_max_handler);
-
 	raw_spin_lock_irqsave(&desc->lock, flags);
 
 	/*
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#124 lore raw

PATCH 113/191 wan: ixp4xx_hss: fix compile-testing on 64-bit

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 504c28c853ec5c626900b914b5833daf0581a344 ]

Change the driver to use portable integer types to avoid warnings during compile testing:

drivers/net/wan/ixp4xx_hss.c:863:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast]

        memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
                           ^
drivers/net/wan/ixp4xx_hss.c:979:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
                                              &port->desc_tab_phys)))
                                              ^~~~~~~~~~~~~~~~~~~~
include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here
                     dma_addr_t *handle);
                                 ^
---
 drivers/net/wan/ixp4xx_hss.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wan/ixp4xx_hss.c +2 -2
index 6a505c26a3e74..a269ed63d90f7 100644
@@ -261,7 +261,7 @@ struct port {
 	struct hss_plat_info *plat;
 	buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
 	struct desc *desc_tab;	/* coherent */
-	u32 desc_tab_phys;
+	dma_addr_t desc_tab_phys;
 	unsigned int id;
 	unsigned int clock_type, clock_rate, loopback;
 	unsigned int initialized, carrier;
@@ -861,7 +861,7 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->stats.tx_dropped++;
 		return NETDEV_TX_OK;
 	}
-	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
+	memcpy_swab32(mem, (u32 *)((uintptr_t)skb->data & ~3), bytes / 4);
 	dev_kfree_skb(skb);
 #endif
 
Signature · 1 line
2.20.1
author maintainer
#125 lore raw

PATCH 114/191 ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m

In reply to Greg Kroah-Hartman

From: Chen Zhou <[email protected]>

[ Upstream commit 8fea78029f5e6ed734ae1957bef23cfda1af4354 ]

If CONFIG_SND_ATMEL_SOC_DMA=m, build error:

sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
(.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'

Function atmel_pcm_dma_platform_register is defined under CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.

---
 sound/soc/atmel/Kconfig | 2 ++
 1 file changed, 2 insertions(+)
sound/soc/atmel/Kconfig +2 -0
index 64b784e96f844..dad778e5884bd 100644
@@ -25,6 +25,8 @@ config SND_ATMEL_SOC_DMA
 
 config SND_ATMEL_SOC_SSC_DMA
 	tristate
+	select SND_ATMEL_SOC_DMA
+	select SND_ATMEL_SOC_PDC
 
 config SND_ATMEL_SOC_SSC
 	tristate
Signature · 1 line
2.20.1
#126 lore raw

Re: [PATCH 4.19 114/191] ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m

Hi!

Quoted 10 lines

[ Upstream commit 8fea78029f5e6ed734ae1957bef23cfda1af4354 ]

If CONFIG_SND_ATMEL_SOC_DMA=m, build error:

sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
(.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'

Function atmel_pcm_dma_platform_register is defined under CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.

4.19 code has significant differences from mainline in this area.

4.19:
config SND_ATMEL_SOC_DMA
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
default m if SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=m
...

mainline:
config SND_ATMEL_SOC_DMA
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
...

Extra 'default m if' line in 4.19 should already prevent this bug, additional select statements are not neccessary.

Best regards,
Pavel

Quoted 10 lines

+++ b/sound/soc/atmel/Kconfig

sound/soc/atmel/Kconfig +2 -0
@@ -25,6 +25,8 @@ config SND_ATMEL_SOC_DMA
 
 config SND_ATMEL_SOC_SSC_DMA
 	tristate
+	select SND_ATMEL_SOC_DMA
+	select SND_ATMEL_SOC_PDC
 
 config SND_ATMEL_SOC_SSC
 	tristate
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#127 lore raw

PATCH 115/191 RDMA/uverbs: Remove needs_kfree_rcu from uverbs_obj_type_class

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 8bdf9dd984c18375d1090ddeb1792511f619c5c1 ]

After device disassociation the uapi_objects are destroyed and freed, however it is still possible that core code can be holding a kref on the uobject. When it finally goes to uverbs_uobject_free() via the kref_put() it can trigger a use-after-free on the uapi_object.

Since needs_kfree_rcu is a micro optimization that only benefits file uobjects, just get rid of it. There is no harm in using kfree_rcu even if it isn't required, and the number of involved objects is small.

---
 drivers/infiniband/core/rdma_core.c | 23 +----------------------
 include/rdma/uverbs_types.h         |  1 -
 2 files changed, 1 insertion(+), 23 deletions(-)
drivers/infiniband/core/rdma_core.c +1 -22
index c4118bcd51035..c2c9bd72b350f 100644
@@ -49,13 +49,7 @@ void uverbs_uobject_get(struct ib_uobject *uobject)
 
 static void uverbs_uobject_free(struct kref *ref)
 {
-	struct ib_uobject *uobj =
-		container_of(ref, struct ib_uobject, ref);
-
-	if (uobj->uapi_object->type_class->needs_kfree_rcu)
-		kfree_rcu(uobj, rcu);
-	else
-		kfree(uobj);
+	kfree_rcu(container_of(ref, struct ib_uobject, ref), rcu);
 }
 
 void uverbs_uobject_put(struct ib_uobject *uobject)
@@ -753,20 +747,6 @@ const struct uverbs_obj_type_class uverbs_idr_class = {
 	.lookup_put = lookup_put_idr_uobject,
 	.destroy_hw = destroy_hw_idr_uobject,
 	.remove_handle = remove_handle_idr_uobject,
-	/*
-	 * When we destroy an object, we first just lock it for WRITE and
-	 * actually DESTROY it in the finalize stage. So, the problematic
-	 * scenario is when we just started the finalize stage of the
-	 * destruction (nothing was executed yet). Now, the other thread
-	 * fetched the object for READ access, but it didn't lock it yet.
-	 * The DESTROY thread continues and starts destroying the object.
-	 * When the other thread continue - without the RCU, it would
-	 * access freed memory. However, the rcu_read_lock delays the free
-	 * until the rcu_read_lock of the READ operation quits. Since the
-	 * exclusive lock of the object is still taken by the DESTROY flow, the
-	 * READ operation will get -EBUSY and it'll just bail out.
-	 */
-	.needs_kfree_rcu = true,
 };
 EXPORT_SYMBOL(uverbs_idr_class);
 
@@ -954,7 +934,6 @@ const struct uverbs_obj_type_class uverbs_fd_class = {
 	.lookup_put = lookup_put_fd_uobject,
 	.destroy_hw = destroy_hw_fd_uobject,
 	.remove_handle = remove_handle_fd_uobject,
-	.needs_kfree_rcu = false,
 };
 EXPORT_SYMBOL(uverbs_fd_class);
 
include/rdma/uverbs_types.h +0 -1
index acb1bfa3cc99a..f70155cc73979 100644
@@ -97,7 +97,6 @@ struct uverbs_obj_type_class {
 	int __must_check (*destroy_hw)(struct ib_uobject *uobj,
 				       enum rdma_remove_reason why);
 	void (*remove_handle)(struct ib_uobject *uobj);
-	u8    needs_kfree_rcu;
 };
 
 struct uverbs_obj_type {
Signature · 1 line
2.20.1
author maintainer
#128 lore raw

PATCH 116/191 tty: synclinkmp: Adjust indentation in several functions

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit 1feedf61e7265128244f6993f23421f33dd93dbc ]

Clang warns:

../drivers/tty/synclinkmp.c:1456:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]

        if (C_CRTSCTS(tty)) {
        ^
../drivers/tty/synclinkmp.c:1453:2: note: previous statement is here
        if (I_IXOFF(tty))
        ^
../drivers/tty/synclinkmp.c:2473:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                                                info->port.tty->hw_stopped = 0;
                                                ^

../drivers/tty/synclinkmp.c:2471:7: note: previous statement is here
if ( debug_level >= DEBUG_LEVEL_ISR ) ^
../drivers/tty/synclinkmp.c:2482:8: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]

                                                info->port.tty->hw_stopped = 1;
                                                ^

../drivers/tty/synclinkmp.c:2480:7: note: previous statement is here
if ( debug_level >= DEBUG_LEVEL_ISR ) ^
../drivers/tty/synclinkmp.c:2809:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]

        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclinkmp.c:2807:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclinkmp.c:3246:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        set_signals(info);
        ^
../drivers/tty/synclinkmp.c:3244:2: note: previous statement is here
        else
        ^

5 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces are mixed together. Convert to just using tabs to be consistent with the Linux kernel coding style and eliminate these warnings from clang.

---
 drivers/tty/synclinkmp.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/tty/synclinkmp.c +12 -12
index 1e4d5b9c981a4..57c2c647af61e 100644
@@ -1454,10 +1454,10 @@ static void throttle(struct tty_struct * tty)
 	if (I_IXOFF(tty))
 		send_xchar(tty, STOP_CHAR(tty));
 
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals &= ~SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1483,10 +1483,10 @@ static void unthrottle(struct tty_struct * tty)
 			send_xchar(tty, START_CHAR(tty));
 	}
 
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals |= SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -2471,7 +2471,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 					if (status & SerialSignal_CTS) {
 						if ( debug_level >= DEBUG_LEVEL_ISR )
 							printk("CTS tx start...");
-			 			info->port.tty->hw_stopped = 0;
+						info->port.tty->hw_stopped = 0;
 						tx_start(info);
 						info->pending_bh |= BH_TRANSMIT;
 						return;
@@ -2480,7 +2480,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 					if (!(status & SerialSignal_CTS)) {
 						if ( debug_level >= DEBUG_LEVEL_ISR )
 							printk("CTS tx stop...");
-			 			info->port.tty->hw_stopped = 1;
+						info->port.tty->hw_stopped = 1;
 						tx_stop(info);
 					}
 				}
@@ -2807,8 +2807,8 @@ static void change_params(SLMP_INFO *info)
 	info->read_status_mask2 = OVRN;
 	if (I_INPCK(info->port.tty))
 		info->read_status_mask2 |= PE | FRME;
- 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- 		info->read_status_mask1 |= BRKD;
+	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+		info->read_status_mask1 |= BRKD;
 	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask2 |= PE | FRME;
 	if (I_IGNBRK(info->port.tty)) {
@@ -3178,7 +3178,7 @@ static int tiocmget(struct tty_struct *tty)
  	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+	get_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
@@ -3216,7 +3216,7 @@ static int tiocmset(struct tty_struct *tty,
 		info->serial_signals &= ~SerialSignal_DTR;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	return 0;
@@ -3228,7 +3228,7 @@ static int carrier_raised(struct tty_port *port)
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+	get_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
@@ -3244,7 +3244,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
 
Signature · 1 line
2.20.1
author maintainer
#129 lore raw

PATCH 117/191 tty: synclink_gt: Adjust indentation in several functions

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit 446e76873b5e4e70bdee5db2f2a894d5b4a7d081 ]

Clang warns:

../drivers/tty/synclink_gt.c:1337:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]

        if (C_CRTSCTS(tty)) {
        ^
../drivers/tty/synclink_gt.c:1335:2: note: previous statement is here
        if (I_IXOFF(tty))
        ^
../drivers/tty/synclink_gt.c:2563:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclink_gt.c:2561:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclink_gt.c:3221:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        set_signals(info);
        ^
../drivers/tty/synclink_gt.c:3219:2: note: previous statement is here
        else
        ^

3 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces are mixed together. Convert to just using tabs to be consistent with the Linux kernel coding style and eliminate these warnings from clang.

---
 drivers/tty/synclink_gt.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/tty/synclink_gt.c +9 -9
index b88ecf102764e..e9779b03ee565 100644
@@ -1335,10 +1335,10 @@ static void throttle(struct tty_struct * tty)
 	DBGINFO(("%s throttle\n", info->device_name));
 	if (I_IXOFF(tty))
 		send_xchar(tty, STOP_CHAR(tty));
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals &= ~SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1360,10 +1360,10 @@ static void unthrottle(struct tty_struct * tty)
 		else
 			send_xchar(tty, START_CHAR(tty));
 	}
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals |= SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -2561,8 +2561,8 @@ static void change_params(struct slgt_info *info)
 	info->read_status_mask = IRQ_RXOVER;
 	if (I_INPCK(info->port.tty))
 		info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
- 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- 		info->read_status_mask |= MASK_BREAK;
+	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+		info->read_status_mask |= MASK_BREAK;
 	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
 	if (I_IGNBRK(info->port.tty)) {
@@ -3193,7 +3193,7 @@ static int tiocmset(struct tty_struct *tty,
 		info->signals &= ~SerialSignal_DTR;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return 0;
 }
@@ -3204,7 +3204,7 @@ static int carrier_raised(struct tty_port *port)
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+	get_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return (info->signals & SerialSignal_DCD) ? 1 : 0;
 }
@@ -3219,7 +3219,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
 
Signature · 1 line
2.20.1
author maintainer
#130 lore raw

PATCH 118/191 visorbus: fix uninitialized variable access

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit caf82f727e69b647f09d57a1fc56e69d22a5f483 ]

The setup_crash_devices_work_queue function only partially initializes the message it sends to chipset_init, leading to undefined behavior:

drivers/visorbus/visorchipset.c: In function 'setup_crash_devices_work_queue':
drivers/visorbus/visorchipset.c:333:6: error: '((unsigned char*)&msg.hdr.flags)[0]' is used uninitialized in this function [-Werror=uninitialized]
if (inmsg->hdr.flags.response_expected)

Set up the entire structure, zero-initializing the 'response_expected' flag.

This was apparently found by the patch that added the -O3 build option in Kconfig.

Fixes 12e364b9f08a ("staging: visorchipset driver to provide registration and other services")
---
 drivers/visorbus/visorchipset.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/visorbus/visorchipset.c +7 -4
index ca752b8f495fa..cb1eb7e05f871 100644
@@ -1210,14 +1210,17 @@ static void setup_crash_devices_work_queue(struct work_struct *work)
 {
 	struct controlvm_message local_crash_bus_msg;
 	struct controlvm_message local_crash_dev_msg;
-	struct controlvm_message msg;
+	struct controlvm_message msg = {
+		.hdr.id = CONTROLVM_CHIPSET_INIT,
+		.cmd.init_chipset = {
+			.bus_count = 23,
+			.switch_count = 0,
+		},
+	};
 	u32 local_crash_msg_offset;
 	u16 local_crash_msg_count;
 
 	/* send init chipset msg */
-	msg.hdr.id = CONTROLVM_CHIPSET_INIT;
-	msg.cmd.init_chipset.bus_count = 23;
-	msg.cmd.init_chipset.switch_count = 0;
 	chipset_init(&msg);
 	/* get saved message count */
 	if (visorchannel_read(chipset_dev->controlvm_channel,
Signature · 1 line
2.20.1
author maintainer
#131 lore raw

PATCH 119/191 driver core: platform: Prevent resouce overflow from causing infinite loops

In reply to Greg Kroah-Hartman

From: Simon Schwartz <[email protected]>

[ Upstream commit 39cc539f90d035a293240c9443af50be55ee81b8 ]

num_resources in the platform_device struct is declared as a u32. The for loops that iterate over num_resources use an int as the counter, which can cause infinite loops on architectures with smaller ints. Change the loop counters to u32.

---
 drivers/base/platform.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/base/platform.c +6 -4
index e9be1f56929af..1d3a50ac21664 100644
@@ -27,6 +27,7 @@
 #include <linux/limits.h>
 #include <linux/property.h>
 #include <linux/kmemleak.h>
+#include <linux/types.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -67,7 +68,7 @@ void __weak arch_setup_pdev_archdata(struct platform_device *pdev)
 struct resource *platform_get_resource(struct platform_device *dev,
 				       unsigned int type, unsigned int num)
 {
-	int i;
+	u32 i;
 
 	for (i = 0; i < dev->num_resources; i++) {
 		struct resource *r = &dev->resource[i];
@@ -162,7 +163,7 @@ struct resource *platform_get_resource_byname(struct platform_device *dev,
 					      unsigned int type,
 					      const char *name)
 {
-	int i;
+	u32 i;
 
 	for (i = 0; i < dev->num_resources; i++) {
 		struct resource *r = &dev->resource[i];
@@ -359,7 +360,8 @@ EXPORT_SYMBOL_GPL(platform_device_add_properties);
  */
 int platform_device_add(struct platform_device *pdev)
 {
-	int i, ret;
+	u32 i;
+	int ret;
 
 	if (!pdev)
 		return -EINVAL;
@@ -446,7 +448,7 @@ EXPORT_SYMBOL_GPL(platform_device_add);
  */
 void platform_device_del(struct platform_device *pdev)
 {
-	int i;
+	u32 i;
 
 	if (pdev) {
 		device_remove_properties(&pdev->dev);
Signature · 1 line
2.20.1
author maintainer
#132 lore raw

PATCH 120/191 driver core: Print device when resources present in really_probe()

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 7c35e699c88bd60734277b26962783c60e04b494 ]

If a device already has devres items attached before probing, a warning backtrace is printed. However, this backtrace does not reveal the offending device, leaving the user uninformed. Furthermore, using WARN_ON() causes systems with panic-on-warn to reboot.

Fix this by replacing the WARN_ON() by a dev_crit() message. Abort probing the device, to prevent doing more damage to the device's resources.

---
 drivers/base/dd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/base/dd.c +4 -1
index 11d24a552ee49..5f6416e6ba96b 100644
@@ -470,7 +470,10 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	atomic_inc(&probe_count);
 	pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
 		 drv->bus->name, __func__, drv->name, dev_name(dev));
-	WARN_ON(!list_empty(&dev->devres_head));
+	if (!list_empty(&dev->devres_head)) {
+		dev_crit(dev, "Resources present before probing\n");
+		return -EBUSY;
+	}
 
 re_probe:
 	dev->driver = drv;
Signature · 1 line
2.20.1
author maintainer
#133 lore raw

PATCH 121/191 bpf: Return -EBADRQC for invalid map type in __bpf_tx_xdp_map

In reply to Greg Kroah-Hartman

From: Li RongQing <[email protected]>

[ Upstream commit 0a29275b6300f39f78a87f2038bbfe5bdbaeca47 ]

A negative value should be returned if map->map_type is invalid although that is impossible now, but if we run into such situation in future, then xdpbuff could be leaked.

Daniel Borkmann suggested:

-EBADRQC should be returned to stay consistent with generic XDP for the tracepoint output and not to be confused with -EOPNOTSUPP from other locations like dev_map_enqueue() when ndo_xdp_xmit is missing and such.

---
 net/core/filter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/filter.c +1 -1
index 9daf1a4118b51..40b3af05c883c 100644
@@ -3207,7 +3207,7 @@ static int __bpf_tx_xdp_map(struct net_device *dev_rx, void *fwd,
 		return err;
 	}
 	default:
-		break;
+		return -EBADRQC;
 	}
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#134 lore raw

PATCH 122/191 vme: bridges: reduce stack usage

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 7483e7a939c074d887450ef1c4d9ccc5909405f8 ]

With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the stack usage in vme_fake grows above the warning limit:

drivers/vme/bridges/vme_fake.c: In function 'fake_master_read':
drivers/vme/bridges/vme_fake.c:610:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] drivers/vme/bridges/vme_fake.c: In function 'fake_master_write':
drivers/vme/bridges/vme_fake.c:797:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

The problem is that in some configurations, each call to fake_vmereadX() puts another variable on the stack.

Reduce the amount of inlining to get back to the previous state, with no function using more than 200 bytes each.

---
 drivers/vme/bridges/vme_fake.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)
drivers/vme/bridges/vme_fake.c +18 -12
index 7d83691047f47..685a43bdc2a1d 100644
@@ -418,8 +418,9 @@ static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr,
 	}
 }
 
-static u8 fake_vmeread8(struct fake_driver *bridge, unsigned long long addr,
-		u32 aspace, u32 cycle)
+static noinline_for_stack u8 fake_vmeread8(struct fake_driver *bridge,
+					   unsigned long long addr,
+					   u32 aspace, u32 cycle)
 {
 	u8 retval = 0xff;
 	int i;
@@ -450,8 +451,9 @@ static u8 fake_vmeread8(struct fake_driver *bridge, unsigned long long addr,
 	return retval;
 }
 
-static u16 fake_vmeread16(struct fake_driver *bridge, unsigned long long addr,
-		u32 aspace, u32 cycle)
+static noinline_for_stack u16 fake_vmeread16(struct fake_driver *bridge,
+					     unsigned long long addr,
+					     u32 aspace, u32 cycle)
 {
 	u16 retval = 0xffff;
 	int i;
@@ -482,8 +484,9 @@ static u16 fake_vmeread16(struct fake_driver *bridge, unsigned long long addr,
 	return retval;
 }
 
-static u32 fake_vmeread32(struct fake_driver *bridge, unsigned long long addr,
-		u32 aspace, u32 cycle)
+static noinline_for_stack u32 fake_vmeread32(struct fake_driver *bridge,
+					     unsigned long long addr,
+					     u32 aspace, u32 cycle)
 {
 	u32 retval = 0xffffffff;
 	int i;
@@ -613,8 +616,9 @@ out:
 	return retval;
 }
 
-static void fake_vmewrite8(struct fake_driver *bridge, u8 *buf,
-			   unsigned long long addr, u32 aspace, u32 cycle)
+static noinline_for_stack void fake_vmewrite8(struct fake_driver *bridge,
+					      u8 *buf, unsigned long long addr,
+					      u32 aspace, u32 cycle)
 {
 	int i;
 	unsigned long long start, end, offset;
@@ -643,8 +647,9 @@ static void fake_vmewrite8(struct fake_driver *bridge, u8 *buf,
 
 }
 
-static void fake_vmewrite16(struct fake_driver *bridge, u16 *buf,
-			    unsigned long long addr, u32 aspace, u32 cycle)
+static noinline_for_stack void fake_vmewrite16(struct fake_driver *bridge,
+					       u16 *buf, unsigned long long addr,
+					       u32 aspace, u32 cycle)
 {
 	int i;
 	unsigned long long start, end, offset;
@@ -673,8 +678,9 @@ static void fake_vmewrite16(struct fake_driver *bridge, u16 *buf,
 
 }
 
-static void fake_vmewrite32(struct fake_driver *bridge, u32 *buf,
-			    unsigned long long addr, u32 aspace, u32 cycle)
+static noinline_for_stack void fake_vmewrite32(struct fake_driver *bridge,
+					       u32 *buf, unsigned long long addr,
+					       u32 aspace, u32 cycle)
 {
 	int i;
 	unsigned long long start, end, offset;
Signature · 1 line
2.20.1
author maintainer
#135 lore raw

PATCH 123/191 drm/nouveau/secboot/gm20b: initialize pointer in gm20b_secboot_new()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 3613a9bea95a1470dd42e4ed1cc7d86ebe0a2dc0 ]

We accidentally set "psb" which is a no-op instead of "*psb" so it generates a static checker warning. We should probably set it before the first error return so that it's always initialized.

Fixes 923f1bd27bf1 ("drm/nouveau/secboot/gm20b: add secure boot support")
---
 drivers/gpu/drm/nouveau/nvkm/subdev/secboot/gm20b.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/nouveau/nvkm/subdev/secboot/gm20b.c +2 -3
index df8b919dcf09b..ace6fefba4280 100644
@@ -108,6 +108,7 @@ gm20b_secboot_new(struct nvkm_device *device, int index,
 	struct gm200_secboot *gsb;
 	struct nvkm_acr *acr;
 
+	*psb = NULL;
 	acr = acr_r352_new(BIT(NVKM_SECBOOT_FALCON_FECS) |
 			   BIT(NVKM_SECBOOT_FALCON_PMU));
 	if (IS_ERR(acr))
@@ -116,10 +117,8 @@ gm20b_secboot_new(struct nvkm_device *device, int index,
 	acr->optional_falcons = BIT(NVKM_SECBOOT_FALCON_PMU);
 
 	gsb = kzalloc(sizeof(*gsb), GFP_KERNEL);
-	if (!gsb) {
-		psb = NULL;
+	if (!gsb)
 		return -ENOMEM;
-	}
 	*psb = &gsb->base;
 
 	ret = nvkm_secboot_ctor(&gm20b_secboot, acr, device, index, &gsb->base);
Signature · 1 line
2.20.1
author maintainer
#136 lore raw

PATCH 124/191 drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw

In reply to Greg Kroah-Hartman

From: Ben Skeggs <[email protected]>

[ Upstream commit 7adc77aa0e11f25b0e762859219c70852cd8d56f ]

Method init is typically ordered by class in the FW image as ThreeD, TwoD, Compute.

Due to a bug in parsing the FW into our internal format, we've been accidentally sending Twod + Compute methods to the ThreeD class, as well as Compute methods to the TwoD class - oops.

---
 .../gpu/drm/nouveau/nvkm/engine/gr/gk20a.c    | 21 ++++++++++---------
 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c +11 -10
index 500cb08dd6080..b57ab5cea9a10 100644
@@ -143,23 +143,24 @@ gk20a_gr_av_to_method(struct gf100_gr *gr, const char *fw_name,
 
 	nent = (fuc.size / sizeof(struct gk20a_fw_av));
 
-	pack = vzalloc((sizeof(*pack) * max_classes) +
-		       (sizeof(*init) * (nent + 1)));
+	pack = vzalloc((sizeof(*pack) * (max_classes + 1)) +
+		       (sizeof(*init) * (nent + max_classes + 1)));
 	if (!pack) {
 		ret = -ENOMEM;
 		goto end;
 	}
 
-	init = (void *)(pack + max_classes);
+	init = (void *)(pack + max_classes + 1);
 
-	for (i = 0; i < nent; i++) {
-		struct gf100_gr_init *ent = &init[i];
+	for (i = 0; i < nent; i++, init++) {
 		struct gk20a_fw_av *av = &((struct gk20a_fw_av *)fuc.data)[i];
 		u32 class = av->addr & 0xffff;
 		u32 addr = (av->addr & 0xffff0000) >> 14;
 
 		if (prevclass != class) {
-			pack[classidx].init = ent;
+			if (prevclass) /* Add terminator to the method list. */
+				init++;
+			pack[classidx].init = init;
 			pack[classidx].type = class;
 			prevclass = class;
 			if (++classidx >= max_classes) {
@@ -169,10 +170,10 @@ gk20a_gr_av_to_method(struct gf100_gr *gr, const char *fw_name,
 			}
 		}
 
-		ent->addr = addr;
-		ent->data = av->data;
-		ent->count = 1;
-		ent->pitch = 1;
+		init->addr = addr;
+		init->data = av->data;
+		init->count = 1;
+		init->pitch = 1;
 	}
 
 	*ppack = pack;
Signature · 1 line
2.20.1