Skip to contentSkip to conversation

microblaze: Replace setup_irq() by request_irq()

PATCH Applied afzal mohammed 2 participants 2 messages Mar 4, 2020 – Mar 9, 2020 Microblaze architecture

v3 of 5 Applied Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 microblaze: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

---
Hi microblaze maintainers,

if okay w/ this change, please consider taking it thr' your tree, else please let me know.

Regards
afzal

Link to v2 & v1,
[v2] https://lkml.kernel.org/r/[email protected]
[v1] https://lkml.kernel.org/r/[email protected]

v3:
* Split out from tree wide series, as Thomas suggested to get it thr' respective maintainers
* Modify pr_err displayed in case of error
* Re-arrange code & choose pr_err args as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by

           pr_err("%s: request_irq() failed"

* Commit message massage

 arch/microblaze/kernel/timer.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
arch/microblaze/kernel/timer.c +2 -8
index a6683484b3a1..f8832cf49384 100644
@@ -161,13 +161,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction timer_irqaction = {
-	.handler = timer_interrupt,
-	.flags = IRQF_TIMER,
-	.name = "timer",
-	.dev_id = &clockevent_xilinx_timer,
-};
-
 static __init int xilinx_clockevent_init(void)
 {
 	clockevent_xilinx_timer.mult =
@@ -309,7 +302,8 @@ static int __init xilinx_timer_init(struct device_node *timer)
 
 	freq_div_hz = timer_clock_freq / HZ;
 
-	ret = setup_irq(irq, &timer_irqaction);
+	ret = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer",
+			  &clockevent_xilinx_timer);
 	if (ret) {
 		pr_err("Failed to setup IRQ");
 		return ret;
Signature · 1 line
2.25.1
maintainer Applied
#1 lore raw
Quoted 59 lines · afzal mohammed

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

---
Hi microblaze maintainers,

if okay w/ this change, please consider taking it thr' your tree, else please let me know.

Regards
afzal

Link to v2 & v1,
[v2] https://lkml.kernel.org/r/[email protected]
[v1] https://lkml.kernel.org/r/[email protected]

v3:
* Split out from tree wide series, as Thomas suggested to get it thr' respective maintainers
* Modify pr_err displayed in case of error
* Re-arrange code & choose pr_err args as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by

           pr_err("%s: request_irq() failed"

* Commit message massage

 arch/microblaze/kernel/timer.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
arch/microblaze/kernel/timer.c +0 -7
index a6683484b3a1..f8832cf49384 100644
@@ -161,13 +161,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction timer_irqaction = {
-	.handler = timer_interrupt,
-	.flags = IRQF_TIMER,
-	.name = "timer",
-	.dev_id = &clockevent_xilinx_timer,
-};
-
 static __init int xilinx_clockevent_init(void)
 {
 	clockevent_xilinx_timer.mult =

arch/microblaze/kernel/timer.c static int __init xilinx_timer_init(struct device_node *timer) · line 309

Quoted 9 lines
arch/microblaze/kernel/timer.c +2 -1
@@ -309,7 +302,8 @@ static int __init xilinx_timer_init(struct device_node *timer)
 
 	freq_div_hz = timer_clock_freq / HZ;
 
-	ret = setup_irq(irq, &timer_irqaction);
+	ret = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer",
+			  &clockevent_xilinx_timer);
 	if (ret) {
 		pr_err("Failed to setup IRQ");
 		return ret;

Applied.

Thanks,
Michal

Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs