Set up generic fbdev after registering device
Subsystems (12)
Thomas Zimmermann
maintainerPATCH 5/10 drm/mediathek: Remove error check from fbdev setup
In reply to Thomas ZimmermannRemove the error check from the fbdev setup function. The function will print a warning.
--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/mediatek/mtk_drm_drv.c +1 -3
@@ -347,9 +347,7 @@ static int mtk_drm_bind(struct device *dev)if (ret <0 ) goto err_deinit; - ret =drm_fbdev_generic_setup (drm,32 ); -if (ret) -DRM_ERROR ("Failed to initialize fbdev: %d\n" , ret); +drm_fbdev_generic_setup (drm,32 );return 0 ;
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 8/10 drm/udl: Remove error check from fbdev setup
In reply to Thomas ZimmermannRemove the error check from the fbdev setup function. The driver's probe function should not depend on a DRM client's state.
--- drivers/gpu/drm/udl/udl_drv.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/gpu/drm/udl/udl_drv.c +1 -5
@@ -97,14 +97,10 @@ static int udl_usb_probe(struct usb_interface *interface,DRM_INFO ("Initialized udl on minor %d\n" , udl->drm.primary->index); - r =drm_fbdev_generic_setup (&udl->drm,0 ); -if (r) - goto err_drm_dev_unregister; +drm_fbdev_generic_setup (&udl->drm,0 );return 0 ; -err_drm_dev_unregister: -drm_dev_unregister (&udl->drm); err_free:drm_dev_put (&udl->drm);return r;
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 1/10 drm/ast: Set up fbdev after registering device; remove error checks
In reply to Thomas ZimmermannGeneric fbdev support is a DRM client. Set it up after registering the new DRM device. Remove the error checks as the driver's probe function should not depend on a DRM client's state.
--- drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- 2 files changed, 3 insertions(+), 5 deletions(-)
drivers/gpu/drm/ast/ast_drv.c +3 -0
@@ -32,6 +32,7 @@#include <drm/drm_crtc_helper.h> #include <drm/drm_drv.h> +#include <drm/drm_fb_helper.h> #include <drm/drm_gem_vram_helper.h> #include <drm/drm_probe_helper.h>
@@ -111,6 +112,8 @@ static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (ret) goto err_ast_driver_unload; +drm_fbdev_generic_setup (dev,32 ); +return 0 ; err_ast_driver_unload:
drivers/gpu/drm/ast/ast_main.c +0 -5
@@ -30,7 +30,6 @@#include <drm/drm_atomic_helper.h> #include <drm/drm_crtc_helper.h> -#include <drm/drm_fb_helper.h> #include <drm/drm_gem.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_gem_vram_helper.h>
@@ -512,10 +511,6 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)drm_mode_config_reset (dev); - ret =drm_fbdev_generic_setup (dev,32 ); -if (ret) - goto out_free; -return 0 ; out_free:kfree (ast);
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 2/10 drm/hibmc: Remove error check from fbdev setup
In reply to Thomas ZimmermannGeneric fbdev support is a DRM client. Remove the error check as the driver's probe function should not depend on a DRM client's state.
--- drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c +1 -5
@@ -307,11 +307,7 @@ static int hibmc_load(struct drm_device *dev)/* reset all the states of crtc/plane/encoder/connector */ drm_mode_config_reset (dev); - ret =drm_fbdev_generic_setup (dev, dev->mode_config.preferred_depth); -if (ret) { -DRM_ERROR ("failed to initialize fbdev: %d\n" , ret); - goto err; - } +drm_fbdev_generic_setup (dev, dev->mode_config.preferred_depth);return 0 ;
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainercover Set up generic fbdev after registering device
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
This is a follow-up patchset to the discussion at [1]. I went through all calls to drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.
Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thomas Zimmermann (10):
drm/ast: Set up fbdev after registering device; remove error checks drm/hibmc: Remove error check from fbdev setup drm/kirin: Set up fbdev after fully registering device drm/ingenic: Remove error check from fbdev setup drm/mediathek: Remove error check from fbdev setup drm/mgag200: Set up fbdev after registering device; remove error
checks
drm/tilcdc: Set up fbdev after fully registering device drm/udl: Remove error check from fbdev setup drm/vboxvideo: Set up fbdev after registering device; remove error
checks
drm/fb-helper: Remove return value from drm_fbdev_generic_setup()
drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- .../gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- drivers/gpu/drm/udl/udl_drv.c | 6 +----- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- include/drm/drm_fb_helper.h | 5 +++-- 13 files changed, 25 insertions(+), 45 deletions(-)
--
2.26.0
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 4/10 drm/ingenic: Remove error check from fbdev setup
Remove the error check from the fbdev setup function. The function will print a warning.
--- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/ingenic/ingenic-drm.c +1 -3
@@ -783,9 +783,7 @@ static int ingenic_drm_probe(struct platform_device *pdev) goto err_devclk_disable; } - ret =drm_fbdev_generic_setup (drm,32 ); -if (ret) -dev_warn (dev,"Unable to start fbdev emulation: %i" , ret); +drm_fbdev_generic_setup (drm,32 );return 0 ;
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 3/10 drm/kirin: Set up fbdev after fully registering device
In reply to Thomas ZimmermannGeneric fbdev support is a DRM client. Set it up after fully registering the new DRM device.
--- drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +2 -2
@@ -277,8 +277,6 @@ static int kirin_drm_bind(struct device *dev)if (ret) goto err_kms_cleanup; -drm_fbdev_generic_setup (drm_dev,32 ); -/* connectors should be registered after drm device register */ if (driver_data->register_connects) { ret =kirin_drm_connectors_register (drm_dev);
@@ -286,6 +284,8 @@ static int kirin_drm_bind(struct device *dev) goto err_drm_dev_unregister; } +drm_fbdev_generic_setup (drm_dev,32 ); +return 0 ; err_drm_dev_unregister:
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 9/10 drm/vboxvideo: Set up fbdev after registering device; remove error checks
In reply to Thomas ZimmermannGeneric fbdev support is a DRM client. Set it up after registering the new DRM device. Remove the error checks as the driver's probe function should not depend on a DRM client's state.
--- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/gpu/drm/vboxvideo/vbox_drv.c +2 -4
@@ -82,14 +82,12 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (ret) goto err_mode_fini; - ret =drm_fbdev_generic_setup (&vbox->ddev,32 ); -if (ret) - goto err_irq_fini; - ret =drm_dev_register (&vbox->ddev,0 );if (ret) goto err_irq_fini; +drm_fbdev_generic_setup (&vbox->ddev,32 ); +return 0 ; err_irq_fini:
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 6/10 drm/mgag200: Set up fbdev after registering device; remove error checks
In reply to Thomas ZimmermannGeneric fbdev support is a DRM client. Set it up after registering the new DRM device. Remove the error checks as the driver's probe function should not depend on a DRM client's state.
--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- 2 files changed, 2 insertions(+), 4 deletions(-)
drivers/gpu/drm/mgag200/mgag200_drv.c +2 -0
@@ -77,6 +77,8 @@ static int mga_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (ret) goto err_mgag200_driver_unload; +drm_fbdev_generic_setup (dev,0 ); +return 0 ; err_mgag200_driver_unload:
drivers/gpu/drm/mgag200/mgag200_main.c +0 -4
@@ -181,10 +181,6 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)dev_warn (&dev->pdev->dev,"Could not initialize cursors. Not doing hardware cursors.\n" ); - r =drm_fbdev_generic_setup (mdev->dev,0 ); -if (r) - goto err_modeset; -return 0 ; err_modeset:
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 7/10 drm/tilcdc: Set up fbdev after fully registering device
In reply to Thomas ZimmermannGeneric fbdev support is a DRM client. Set it up after fully registering the new DRM device.
--- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/tilcdc/tilcdc_drv.c +1 -2
@@ -390,10 +390,9 @@ static int tilcdc_init(struct drm_driver *ddrv, struct device *dev) ret =drm_dev_register (ddev,0 );if (ret) goto init_failed; + priv->is_registered = true;drm_fbdev_generic_setup (ddev, bpp); - - priv->is_registered = true;return 0 ; init_failed:
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerPATCH 10/10 drm/fb-helper: Remove return value from drm_fbdev_generic_setup()
In reply to Thomas ZimmermannGeneric fbdev emulation is a DRM client. Drivers should invoke the setup function, but not depend on its success. Hence remove the return value.
--- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- include/drm/drm_fb_helper.h | 5 +++-- 2 files changed, 11 insertions(+), 12 deletions(-)
drivers/gpu/drm/drm_fb_helper.c +8 -10
@@ -2186,11 +2186,9 @@ static const struct drm_client_funcs drm_fbdev_client_funcs = {* Setup will be retried on the next hotplug event. * * The fbdev is destroyed by drm_dev_unregister(). -* -* Returns: -* Zero on success or negative error code on failure. */ -int drm_fbdev_generic_setup (struct drm_device *dev,unsigned int preferred_bpp) +void drm_fbdev_generic_setup (struct drm_device *dev, +unsigned int preferred_bpp) {struct drm_fb_helper *fb_helper;int ret;
@@ -2198,17 +2196,19 @@ int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)WARN (dev->fb_helper,"fb_helper is already set!\n" );if (!drm_fbdev_emulation) -return 0 ; +return ; fb_helper =kzalloc (sizeof (*fb_helper),GFP_KERNEL ); -if (!fb_helper) -return -ENOMEM ; +if (!fb_helper) { +drm_err (dev,"Failed to allocate fb_helper\n" ); +return ; + } ret =drm_client_init (dev, &fb_helper->client,"fbdev" , &drm_fbdev_client_funcs);if (ret) {kfree (fb_helper);drm_err (dev,"Failed to register client: %d\n" , ret); -return ret; +return ; }if (!preferred_bpp)
@@ -2222,8 +2222,6 @@ int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)drm_dbg_kms (dev,"client hotplug ret=%d\n" , ret);drm_client_register (&fb_helper->client); - -return 0 ; }EXPORT_SYMBOL (drm_fbdev_generic_setup);
include/drm/drm_fb_helper.h +3 -2
@@ -269,7 +269,8 @@ int drm_fb_helper_debug_leave(struct fb_info *info);void drm_fb_helper_lastclose (struct drm_device *dev);void drm_fb_helper_output_poll_changed (struct drm_device *dev); -int drm_fbdev_generic_setup (struct drm_device *dev,unsigned int preferred_bpp); +void drm_fbdev_generic_setup (struct drm_device *dev, +unsigned int preferred_bpp);#else static inline void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
@@ -443,7 +444,7 @@ static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev) { } -static inline int +static inline void drm_fbdev_generic_setup (struct drm_device *dev,unsigned int preferred_bpp) {return 0 ;
Signature · 6 lines
2.26.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Thomas.
Quoted 4 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Thanks for taking the time to refactor all the relevant drivers.
I have received some push-back in the past when suggesting this, but cannot remember from who.
Let's see what review comments you get.
As the rule is that the fbdev setup shall be setup after registering the DRM device - it would be nice to have this included in the documentation of drm_fbdev_generic_setup
Could you try to to update the documentation to cover this?
I will get back to the patches later this week.
Sam
Quoted 39 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thomas Zimmermann (10):
drm/ast: Set up fbdev after registering device; remove error checks drm/hibmc: Remove error check from fbdev setup drm/kirin: Set up fbdev after fully registering device drm/ingenic: Remove error check from fbdev setup drm/mediathek: Remove error check from fbdev setup drm/mgag200: Set up fbdev after registering device; remove error
checks
drm/tilcdc: Set up fbdev after fully registering device drm/udl: Remove error check from fbdev setup drm/vboxvideo: Set up fbdev after registering device; remove error
checks
drm/fb-helper: Remove return value fromdrm_fbdev_generic_setup()drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- .../gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- drivers/gpu/drm/udl/udl_drv.c | 6 +----- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- include/drm/drm_fb_helper.h | 5 +++-- 13 files changed, 25 insertions(+), 45 deletions(-)
Quoted 2 lines
--
2.26.0
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerHi Sam
Am 06.04.20 um 22:00 schrieb Sam Ravnborg:
Quoted 14 lines
Hi Thomas.
Quoted 4 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Thanks for taking the time to refactor all the relevant drivers.
I have received some push-back in the past when suggesting this, but cannot remember from who.
Let's see what review comments you get.
Quoted 5 lines
As the rule is that the fbdev setup shall be setup after registering the DRM device - it would be nice to have this included in the documentation of
drm_fbdev_generic_setupCould you try to to update the documentation to cover this?
Good idea. I'll add this to patchset's next iteration.
Best regards
Thomas
Quoted 46 lines
I will get back to the patches later this week.
Sam
Quoted 41 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thomas Zimmermann (10):
drm/ast: Set up fbdev after registering device; remove error checks drm/hibmc: Remove error check from fbdev setup drm/kirin: Set up fbdev after fully registering device drm/ingenic: Remove error check from fbdev setup drm/mediathek: Remove error check from fbdev setup drm/mgag200: Set up fbdev after registering device; remove error
checks
drm/tilcdc: Set up fbdev after fully registering device drm/udl: Remove error check from fbdev setup drm/vboxvideo: Set up fbdev after registering device; remove error
checks
drm/fb-helper: Remove return value fromdrm_fbdev_generic_setup()drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- .../gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- drivers/gpu/drm/udl/udl_drv.c | 6 +----- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- include/drm/drm_fb_helper.h | 5 +++-- 13 files changed, 25 insertions(+), 45 deletions(-)--
2.26.0
Signature · 6 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 4 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
This always has been my expectation, as you might have concluded from the absence of any qemu guest driver patches in this series ;)
The patches look sane too, so for the series:
cheers,
Gerd
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 17 lines · Thomas Zimmermann
Hi Sam
Am 06.04.20 um 22:00 schrieb Sam Ravnborg:
Quoted 14 lines
Hi Thomas.
Quoted 4 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Thanks for taking the time to refactor all the relevant drivers.
I have received some push-back in the past when suggesting this, but cannot remember from who.
Let's see what review comments you get.
Quoted 7 lines
Quoted 5 lines
As the rule is that the fbdev setup shall be setup after registering the DRM device - it would be nice to have this included in the documentation of
drm_fbdev_generic_setupCould you try to to update the documentation to cover this?
Good idea. I'll add this to patchset's next iteration.
How about something like:
drm_WARN_ON(dev, !dev->registered);
(Not sure if that needs to be !dev->driver->load && !dev->registered).
This can be a follow-up patch later too.
BR,
Jani.
Quoted 50 lines
Best regards
ThomasQuoted 46 lines
I will get back to the patches later this week.
Sam
Quoted 41 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thomas Zimmermann (10):
drm/ast: Set up fbdev after registering device; remove error checks drm/hibmc: Remove error check from fbdev setup drm/kirin: Set up fbdev after fully registering device drm/ingenic: Remove error check from fbdev setup drm/mediathek: Remove error check from fbdev setup drm/mgag200: Set up fbdev after registering device; remove error
checks
drm/tilcdc: Set up fbdev after fully registering device drm/udl: Remove error check from fbdev setup drm/vboxvideo: Set up fbdev after registering device; remove error
checks
drm/fb-helper: Remove return value fromdrm_fbdev_generic_setup()drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- .../gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- drivers/gpu/drm/udl/udl_drv.c | 6 +----- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- include/drm/drm_fb_helper.h | 5 +++-- 13 files changed, 25 insertions(+), 45 deletions(-)--
2.26.0
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 03/10] drm/kirin: Set up fbdev after fully registering device
In reply to Thomas ZimmermannQuoted 22 lines · Thomas Zimmermann
Generic fbdev support is a DRM client. Set it up after fully registering the new DRM device.
Signed-off-by Thomas Zimmermann <[email protected]>--- drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +0
-2@@ -277,8 +277,6 @@ static int kirin_drm_bind(struct device *dev)if (ret) goto err_kms_cleanup; -drm_fbdev_generic_setup (drm_dev,32 ); -/* connectors should be registered after drm device register */ if (driver_data->register_connects) { ret =kirin_drm_connectors_register (drm_dev);
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c static int kirin_drm_bind(struct device *dev) · line 287
Quoted 4 lines
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +1
-0@@ -286,6 +284,8 @@ static int kirin_drm_bind(struct device *dev) goto err_drm_dev_unregister; } +drm_fbdev_generic_setup (drm_dev,32 );
The code you jump over is nonsense and should be reverted. I replied to the patch that landed this.
-Daniel
Quoted 7 lines
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +1
-0+return 0 ; err_drm_dev_unregister:Signature · 1 line
2.26.0
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 04/10] drm/ingenic: Remove error check from fbdev setup
In reply to Thomas ZimmermannHi Thomas,
Quoted 4 lines · Thomas Zimmermann
Remove the error check from the fbdev setup function. The function will print a warning.
Signed-off-by Thomas Zimmermann <[email protected]>
Quoted 21 lines
--- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)drivers/gpu/drm/ingenic/ingenic-drm.c +1
-4@@ -783,9 +783,7 @@ static int ingenic_drm_probe(struct platform_device *pdev) goto err_devclk_disable; } - ret =drm_fbdev_generic_setup (drm,32 ); -if (ret) -dev_warn (dev,"Unable to start fbdev emulation: %i" , ret); +drm_fbdev_generic_setup (drm,32 );return 0 ; --
Quoted 2 lines
2.26.0
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Sam Ravnborg
Acked-byHi Thomas.
Quoted 17 lines · Thomas Zimmermann
Hi Sam
Am 06.04.20 um 22:00 schrieb Sam Ravnborg:
Quoted 14 lines
Hi Thomas.
Quoted 4 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Thanks for taking the time to refactor all the relevant drivers.
I have received some push-back in the past when suggesting this, but cannot remember from who.
Let's see what review comments you get.
Quoted 7 lines
Quoted 5 lines
As the rule is that the fbdev setup shall be setup after registering the DRM device - it would be nice to have this included in the documentation of
drm_fbdev_generic_setupCould you try to to update the documentation to cover this?
Good idea. I'll add this to patchset's next iteration.
Thanks
Patch 1 to 9 are all:
This patch "drm/tilcdc: Set up fbdev after fully registering device" looks a little point less, but I see from a consistency point of view why you did it.
So therefore it is also acked.
Sam
Quoted 48 lines
Best regards
ThomasQuoted 44 lines
I will get back to the patches later this week.
Sam
Quoted 39 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thomas Zimmermann (10):
drm/ast: Set up fbdev after registering device; remove error checks drm/hibmc: Remove error check from fbdev setup drm/kirin: Set up fbdev after fully registering device drm/ingenic: Remove error check from fbdev setup drm/mediathek: Remove error check from fbdev setup drm/mgag200: Set up fbdev after registering device; remove error
checks
drm/tilcdc: Set up fbdev after fully registering device drm/udl: Remove error check from fbdev setup drm/vboxvideo: Set up fbdev after registering device; remove error
checks
drm/fb-helper: Remove return value fromdrm_fbdev_generic_setup()drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- .../gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- drivers/gpu/drm/udl/udl_drv.c | 6 +----- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- include/drm/drm_fb_helper.h | 5 +++-- 13 files changed, 25 insertions(+), 45 deletions(-)
Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
--
2.26.0Signature · 6 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 10/10] drm/fb-helper: Remove return value from drm_fbdev_generic_setup()
In reply to Thomas ZimmermannHi Thomas.
Quoted 5 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. Drivers should invoke the setup function, but not depend on its success. Hence remove the return value.
Signed-off-by Thomas Zimmermann <[email protected]>
If this goes in as-is then it is:
You could apply the series now to avoid letting a doc update postponse the others.
And then make the doc update a follow-up patch.
Sam
Quoted 81 lines
--- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- include/drm/drm_fb_helper.h | 5 +++-- 2 files changed, 11 insertions(+), 12 deletions(-)drivers/gpu/drm/drm_fb_helper.c +8
-10@@ -2186,11 +2186,9 @@ static const struct drm_client_funcs drm_fbdev_client_funcs = {* Setup will be retried on the next hotplug event. * * The fbdev is destroyed by drm_dev_unregister(). -* -* Returns: -* Zero on success or negative error code on failure. */ -int drm_fbdev_generic_setup (struct drm_device *dev,unsigned int preferred_bpp) +void drm_fbdev_generic_setup (struct drm_device *dev, +unsigned int preferred_bpp) {struct drm_fb_helper *fb_helper;int ret;@@ -2198,17 +2196,19 @@ int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)WARN (dev->fb_helper,"fb_helper is already set!\n" );if (!drm_fbdev_emulation) -return 0 ; +return ; fb_helper =kzalloc (sizeof (*fb_helper),GFP_KERNEL ); -if (!fb_helper) -return -ENOMEM ; +if (!fb_helper) { +drm_err (dev,"Failed to allocate fb_helper\n" ); +return ; + } ret =drm_client_init (dev, &fb_helper->client,"fbdev" , &drm_fbdev_client_funcs);if (ret) {kfree (fb_helper);drm_err (dev,"Failed to register client: %d\n" , ret); -return ret; +return ; }if (!preferred_bpp)@@ -2222,8 +2222,6 @@ int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)drm_dbg_kms (dev,"client hotplug ret=%d\n" , ret);drm_client_register (&fb_helper->client); - -return 0 ; }EXPORT_SYMBOL (drm_fbdev_generic_setup);include/drm/drm_fb_helper.h +3
-2@@ -269,7 +269,8 @@ int drm_fb_helper_debug_leave(struct fb_info *info);void drm_fb_helper_lastclose (struct drm_device *dev);void drm_fb_helper_output_poll_changed (struct drm_device *dev); -int drm_fbdev_generic_setup (struct drm_device *dev,unsigned int preferred_bpp); +void drm_fbdev_generic_setup (struct drm_device *dev, +unsigned int preferred_bpp);#else static inline void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,@@ -443,7 +444,7 @@ static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev) { } -static inline int +static inline void drm_fbdev_generic_setup (struct drm_device *dev,unsigned int preferred_bpp) {return 0 ;Signature · 1 line
2.26.0
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Den 06.04.2020 15.43, skrev Thomas Zimmermann:
Quoted 5 lines
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Quoted 9 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thanks for doing this, series is:
With so many drivers using generic fbdev I wondered if we could make it the default and let DRM core handle it (would pull drm_fb_helper into drm.ko).
Something like this at the end of drm_dev_register():
if (!dev->fb_helper)
drm_fbdev_generic_setup(dev, 0);
AFAICS all drivers that don't use generic fbdev, do fbdev setup before calling drm_dev_register() except msm so that would need some adjustment, calling drm_fb_helper_init() before drm_dev_register() would do.
One missing piece is for drivers (like vc4) that uses 16 bpp on fbdev to save on memory, not sure how that should be handled, an optional drm_mode_config->fbdev_bpp maybe.
Having DRM core take care of fbdev emulation was an idea Laurent had which was the spark that set me off making the generic fbdev emulation.
Maybe it's still too early to make this move, I don't know.
Noralf.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 05/10] drm/mediathek: Remove error check from fbdev setup
In reply to Thomas ZimmermannDen 06.04.2020 15.44, skrev Thomas Zimmermann:
Quoted 5 lines
Remove the error check from the fbdev setup function. The function will print a warning.
Signed-off-by Thomas Zimmermann <[email protected]>---
Subject: s/mediathek/mediatek/
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 07/10] drm/tilcdc: Set up fbdev after fully registering device
In reply to Thomas ZimmermannQuoted 4 lines · Thomas Zimmermann
Generic fbdev support is a DRM client. Set it up after fully registering the new DRM device.
Signed-off-by Thomas Zimmermann <[email protected]>
However, this change hardly makes any difference, as the only place where "is_registere"'s value is checked is in tilcdc_fini() which is also called to cleanup the resources if tilcdc_init() fails.
Best regards,
Jyri
Quoted 21 lines
--- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/tilcdc/tilcdc_drv.c +1
-2@@ -390,10 +390,9 @@ static int tilcdc_init(struct drm_driver *ddrv, struct device *dev) ret =drm_dev_register (ddev,0 );if (ret) goto init_failed; + priv->is_registered = true;drm_fbdev_generic_setup (ddev, bpp); - - priv->is_registered = true;return 0 ; init_failed:
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerHi Noralf
Am 07.04.20 um 13:02 schrieb Noralf Trønnes:
Quoted 35 lines
Den 06.04.2020 15.43, skrev Thomas Zimmermann:
Quoted 5 lines
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Quoted 9 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thanks for doing this, series is:
Reviewed-by Noralf Trønnes <[email protected]>With so many drivers using generic fbdev I wondered if we could make it the default and let DRM core handle it (would pull
drm_fb_helperinto drm.ko).Something like this at the end of
drm_dev_register():if (!dev->fb_helper)
drm_fbdev_generic_setup(dev, 0);AFAICS all drivers that don't use generic fbdev, do fbdev setup before calling
drm_dev_register()except msm so that would need some adjustment, callingdrm_fb_helper_init()beforedrm_dev_register()would do.
Quoted 8 lines
One missing piece is for drivers (like vc4) that uses 16 bpp on fbdev to save on memory, not sure how that should be handled, an optional
drm_mode_config->fbdev_bppmaybe.Having DRM core take care of fbdev emulation was an idea Laurent had which was the spark that set me off making the generic fbdev emulation.
Maybe it's still too early to make this move, I don't know.
I think we should wait a bit. As you mentioned, there are drivers that have an fbdev bpp that differs from the preferred one. There might also be a chicken-and-egg problem with core and fb-helper modules.
Additionally, we should think about possible other in-kernel clients (e.g., the bootsplash) and how they would interact with such defaults.
At some later point, we could introduce an interface that sets up all available in-kernel clients.
Best regards
Thomas
Quoted 3 lines
Noralf.
Signature · 6 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerRe: [PATCH 03/10] drm/kirin: Set up fbdev after fully registering device
In reply to Daniel VetterHi
Am 07.04.20 um 10:04 schrieb Daniel Vetter:
Quoted 26 lines · Thomas Zimmermann
Quoted 25 lines
Generic fbdev support is a DRM client. Set it up after fully registering the new DRM device.
Signed-off-by Thomas Zimmermann <[email protected]>--- drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +0
-2@@ -277,8 +277,6 @@ static int kirin_drm_bind(struct device *dev)if (ret) goto err_kms_cleanup; -drm_fbdev_generic_setup (drm_dev,32 ); -/* connectors should be registered after drm device register */ if (driver_data->register_connects) { ret =kirin_drm_connectors_register (drm_dev);@@ -286,6 +284,8 @@ static int kirin_drm_bind(struct device *dev) goto err_drm_dev_unregister; }
Quoted 4 lines
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c static int kirin_drm_bind(struct device *dev) · line 287
Quoted 1 line
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +1
-0+drm_fbdev_generic_setup (drm_dev,32 );The code you jump over is nonsense and should be reverted. I replied to the patch that landed this.
What did they respond?
When I read this code, I wondered why it might be there.
Best regards
Thomas
Quoted 10 lines
-Daniel
Quoted 7 lines
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c +1
-0+return 0 ; err_drm_dev_unregister:Signature · 1 line
2.26.0
Signature · 6 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Thomas/Noralf.
Quoted 8 lines
Quoted 4 lines
Having DRM core take care of fbdev emulation was an idea Laurent had which was the spark that set me off making the generic fbdev emulation.
Maybe it's still too early to make this move, I don't know.
I think we should wait a bit. As you mentioned, there are drivers that have an fbdev bpp that differs from the preferred one. There might also be a chicken-and-egg problem with core and fb-helper modules.
Noralf - you had analyzed what drivers are (yet) to migrate to to the common fbdev emulation.
rmada
gma500
amd
omapdrm
nouveau
i915
msm
tegra
exynos
radeon
rockchip
Maybe add this list to todo.rst - and if someone knows about it we could have a small description what is required before a driver can migrate.
I can cook up the patch if anyone thinks this is useful.
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerHi Sam
Am 07.04.20 um 18:50 schrieb Sam Ravnborg:
Quoted 11 lines
Hi Thomas/Noralf.
Quoted 8 lines
Quoted 4 lines
Having DRM core take care of fbdev emulation was an idea Laurent had which was the spark that set me off making the generic fbdev emulation.
Maybe it's still too early to make this move, I don't know.
I think we should wait a bit. As you mentioned, there are drivers that have an fbdev bpp that differs from the preferred one. There might also be a chicken-and-egg problem with core and fb-helper modules.
Quoted 5 lines
Noralf - you had analyzed what drivers are (yet) to migrate to to the common fbdev emulation.
armada
This one looks like its convertible to common infrastructure. Not just the fbdev console, but quite a bit of the framebuffer and GEM code. But I don't have the HW to test any patches.
Quoted 1 line
gma500
I have a patch for replacing some of the gma500 code with common infrastructure. It currently fails and I haven't found time to look closer.
Quoted 10 lines
amd
omapdrm
nouveau
i915
msm
tegra
exynos
radeon
rockchip
Quoted 4 lines
Maybe add this list to
todo.rst- and if someone knows about it we could have a small description what is required before a driver can migrate.
I can cook up the patch if anyone thinks this is useful.
I thought there already was such an entry in the TODO list. Some of these drivers have HW acceleration of some kind; although the benefits might be debatable. And there where 2 or 3 drivers with a design that is incompatible with generic fbdev. There's also some information at [1].
In any case, we should consider initializing each driver's fb console after registering the device. All console implementations would than act like DRM clients and less like driver components.
Best regards
Thomas
[1]
https://lore.kernel.org/dri-devel/[email protected]/
Quoted 3 lines
Sam
Signature · 6 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Zimmermann
maintainerHi Jani
Am 07.04.20 um 09:24 schrieb Jani Nikula:
Quoted 24 lines · Thomas Zimmermann
Quoted 23 lines
Hi Sam
Am 06.04.20 um 22:00 schrieb Sam Ravnborg:
Quoted 19 lines
Hi Thomas.
Quoted 4 lines · Thomas Zimmermann
Generic fbdev emulation is a DRM client. If possible, it should behave like userspace clients. Therefore it should not run before the driver registered the new DRM device. If the setup function fails, the driver should not report an error.
Thanks for taking the time to refactor all the relevant drivers.
I have received some push-back in the past when suggesting this, but cannot remember from who.
Let's see what review comments you get.As the rule is that the fbdev setup shall be setup after registering the DRM device - it would be nice to have this included in the documentation of
drm_fbdev_generic_setupCould you try to to update the documentation to cover this?
Quoted 7 lines
Quoted 1 line
Good idea. I'll add this to patchset's next iteration.
How about something like:
drm_WARN_ON(dev, !dev->registered);(Not sure if that needs to be !dev->driver->load && !dev->registered).
I added such a warning to the patch. Only radeon uses load(), but it has its own fbdev code. So the original test should be fine.
Best regards
Thomas
Quoted 58 lines
This can be a follow-up patch later too.
BR,
Jani.Quoted 50 lines
Best regards
ThomasQuoted 46 lines
I will get back to the patches later this week.
Sam
Quoted 41 lines
This is a follow-up patchset to the discussion at [1]. I went through all calls to
drm_fbdev_generic_setup(), moved them to the final operation of their driver's probe function, and removed the return value.Built-tested on x86-64, aarch64 and arm.
[1] https://lore.kernel.org/dri-devel/[email protected]/T/#m216b5b37aeeb7b28d55ad73b7a702b3d1d7bf867
Thomas Zimmermann (10):
drm/ast: Set up fbdev after registering device; remove error checks drm/hibmc: Remove error check from fbdev setup drm/kirin: Set up fbdev after fully registering device drm/ingenic: Remove error check from fbdev setup drm/mediathek: Remove error check from fbdev setup drm/mgag200: Set up fbdev after registering device; remove error
checks
drm/tilcdc: Set up fbdev after fully registering device drm/udl: Remove error check from fbdev setup drm/vboxvideo: Set up fbdev after registering device; remove error
checks
drm/fb-helper: Remove return value fromdrm_fbdev_generic_setup()drivers/gpu/drm/ast/ast_drv.c | 3 +++ drivers/gpu/drm/ast/ast_main.c | 5 ----- drivers/gpu/drm/drm_fb_helper.c | 18 ++++++++---------- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 6 +----- .../gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 4 ++-- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 +--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +--- drivers/gpu/drm/mgag200/mgag200_drv.c | 2 ++ drivers/gpu/drm/mgag200/mgag200_main.c | 4 ---- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 +-- drivers/gpu/drm/udl/udl_drv.c | 6 +----- drivers/gpu/drm/vboxvideo/vbox_drv.c | 6 ++---- include/drm/drm_fb_helper.h | 5 +++-- 13 files changed, 25 insertions(+), 45 deletions(-)--
2.26.0
Signature · 6 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel