Makefile: libfdt: build only the strict necessary
v3 cover Makefile: libfdt: build only the strict necessary
v2 -> v3:
* changed into a 2 patch series; in the second patch we remove the old compatibility gunks that were meant for removal some time after 4.1.
* renamed the libfdt PHONY rule to dtc/all, with the intent to make existing working trees forward and backward compatible across the change.
v1 -> v2:
* fix error generated when running UNCHECKED_GOALS without prior configure, for example during make docker-image-fedora. Without configure, DSOSUF is empty, and the module pattern rule in rules.mak that uses this variable can match too much; provide a default in the Makefile to avoid it.
* only attempt to build the archive when there is a non-empty list of objects. This could be done in general for the %.a: pattern in rules.mak, but maybe there are valid reasons to build an empty .a?
* removed some intermediate variables that did not add much value (LIBFDT_srcdir, LIBFDT_archive)
Tested locally with 3 VPATH configurations (no-, VPATH, VPATH in src subdir), and with docker-image-fedora, docker-test-debug@fedora that failed before.
Claudio Fontana (2):
Makefile: libfdt: build only the strict necessary
Makefile: remove old compatibility gunks
Makefile | 32 ++++++++++++++++---------------- configure | 6 +----- rules.mak | 2 ++ 3 files changed, 19 insertions(+), 21 deletions(-)
Signature · 1 line
2.16.4
PATCH v3 1/2 Makefile: libfdt: build only the strict necessary
when building dtc/libfdt, we were previously using dtc/Makefile, which tries to build some artifacts that are not needed, and can complain on stderr about the absence of tools that are not required to build just libfdt.
Instead, build only the strict necessary to get libfdt.a .
--- Makefile | 21 +++++++++++++-------- configure | 4 ---- rules.mak | 2 ++ 3 files changed, 15 insertions(+), 12 deletions(-)
Makefile +13 -8
@@ -4,6 +4,10 @@ ifneq ($(words $(subst :, ,$(CURDIR))), 1) $(error main directory cannot contain spaces nor colons) endif +# some pattern rules in rules.mak are confused by an empty DSOSUF, +# and UNCHECKED_GOALS for testing (docker-) can run without prior configure. +DSOSUF ?= ".so" + # Always point to the root of the build tree (needs GNU make). BUILD_DIR=$(CURDIR)
@@ -526,15 +530,17 @@ $(SOFTMMU_FUZZ_RULES): $(edk2-decompressed) $(TARGET_DIRS_RULES): $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),) -DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt -DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS) -DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt - +LIBFDT_objdir = dtc/libfdt +-include $(SRC_PATH)/dtc/libfdt/Makefile.libfdt +LIBFDT_objects = $(addprefix $(LIBFDT_objdir)/, $(LIBFDT_OBJS)) +# the name dtc/all is for backward compatibility .PHONY: dtc/all -dtc/all: .git-submodule-status dtc/libfdt dtc/tests - $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,) +dtc/all: .git-submodule-status $(LIBFDT_objdir)/libfdt.a +$(LIBFDT_objdir)/libfdt.a: $(LIBFDT_objects) + $(if $(LIBFDT_objects),$(call quiet-command,rm -f $@ && $(AR) rcs $@ $^,"AR","$(TARGET_DIR)$@"),) -dtc/%: .git-submodule-status +$(LIBFDT_objects): | $(LIBFDT_objdir) +$(LIBFDT_objdir): .git-submodule-status @mkdir -p $@ # Overriding CFLAGS causes us to lose defines added in the sub-makefile.
@@ -821,7 +827,6 @@ distclean: clean rm -rf $$d || exit 1 ; \ done rm -Rf .sdk - if test -f dtc/version_gen.h; then $(MAKE) $(DTC_MAKE_ARGS) clean; fi KEYMAPS=da en-gb et fr fr-ch is lt no pt-br sv \ ar de en-us fi fr-be hr it lv nl pl ru th \
configure +0 -4
@@ -4278,10 +4278,6 @@ EOF if test -d "${source_path}/dtc/libfdt" || test -e "${source_path}/.git" ; then fdt=git mkdir -p dtc - if [ "$pwd_is_source_path" != "y" ] ; then - symlink "$source_path/dtc/Makefile" "dtc/Makefile" - symlink "$source_path/dtc/scripts" "dtc/scripts" - fi fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt" fdt_ldflags="-L\$(BUILD_DIR)/dtc/libfdt" fdt_libs="$fdt_libs"
rules.mak +2 -0
@@ -105,6 +105,8 @@ LINK = $(call quiet-command, $(LINKPROG) $(CFLAGS) $(QEMU_LDFLAGS) -o $@ \ DSO_OBJ_CFLAGS := -fPIC -DBUILD_DSO module-common.o: CFLAGS += $(DSO_OBJ_CFLAGS) + +# Note: DSOSUF must not be empty, or these rules will try to match too much %$(DSOSUF): QEMU_LDFLAGS += $(LDFLAGS_SHARED) %$(DSOSUF): %.mo $(call LINK,$^)
Signature · 1 line
2.16.4
PATCH v3 1/2 Makefile: libfdt: build only the strict necessary
In reply to Claudio Fontanawhen building dtc/libfdt, we were previously using dtc/Makefile, which tries to build some artifacts that are not needed, and can complain on stderr about the absence of tools that are not required to build just libfdt.
Instead, build only the strict necessary to get libfdt.a .
--- Makefile | 21 +++++++++++++-------- configure | 4 ---- rules.mak | 2 ++ 3 files changed, 15 insertions(+), 12 deletions(-)
Makefile +13 -8
@@ -4,6 +4,10 @@ ifneq ($(words $(subst :, ,$(CURDIR))), 1) $(error main directory cannot contain spaces nor colons) endif +# some pattern rules in rules.mak are confused by an empty DSOSUF, +# and UNCHECKED_GOALS for testing (docker-) can run without prior configure. +DSOSUF ?= ".so" + # Always point to the root of the build tree (needs GNU make). BUILD_DIR=$(CURDIR)
@@ -526,15 +530,17 @@ $(SOFTMMU_FUZZ_RULES): $(edk2-decompressed) $(TARGET_DIRS_RULES): $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),) -DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt -DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS) -DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt - +LIBFDT_objdir = dtc/libfdt +-include $(SRC_PATH)/dtc/libfdt/Makefile.libfdt +LIBFDT_objects = $(addprefix $(LIBFDT_objdir)/, $(LIBFDT_OBJS)) +# the name dtc/all is for backward compatibility .PHONY: dtc/all -dtc/all: .git-submodule-status dtc/libfdt dtc/tests - $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,) +dtc/all: .git-submodule-status $(LIBFDT_objdir)/libfdt.a +$(LIBFDT_objdir)/libfdt.a: $(LIBFDT_objects) + $(if $(LIBFDT_objects),$(call quiet-command,rm -f $@ && $(AR) rcs $@ $^,"AR","$(TARGET_DIR)$@"),) -dtc/%: .git-submodule-status +$(LIBFDT_objects): | $(LIBFDT_objdir) +$(LIBFDT_objdir): .git-submodule-status @mkdir -p $@ # Overriding CFLAGS causes us to lose defines added in the sub-makefile.
@@ -821,7 +827,6 @@ distclean: clean rm -rf $$d || exit 1 ; \ done rm -Rf .sdk - if test -f dtc/version_gen.h; then $(MAKE) $(DTC_MAKE_ARGS) clean; fi KEYMAPS=da en-gb et fr fr-ch is lt no pt-br sv \ ar de en-us fi fr-be hr it lv nl pl ru th \
configure +0 -4
@@ -4278,10 +4278,6 @@ EOF if test -d "${source_path}/dtc/libfdt" || test -e "${source_path}/.git" ; then fdt=git mkdir -p dtc - if [ "$pwd_is_source_path" != "y" ] ; then - symlink "$source_path/dtc/Makefile" "dtc/Makefile" - symlink "$source_path/dtc/scripts" "dtc/scripts" - fi fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt" fdt_ldflags="-L\$(BUILD_DIR)/dtc/libfdt" fdt_libs="$fdt_libs"
rules.mak +2 -0
@@ -105,6 +105,8 @@ LINK = $(call quiet-command, $(LINKPROG) $(CFLAGS) $(QEMU_LDFLAGS) -o $@ \ DSO_OBJ_CFLAGS := -fPIC -DBUILD_DSO module-common.o: CFLAGS += $(DSO_OBJ_CFLAGS) + +# Note: DSOSUF must not be empty, or these rules will try to match too much %$(DSOSUF): QEMU_LDFLAGS += $(LDFLAGS_SHARED) %$(DSOSUF): %.mo $(call LINK,$^)
Signature · 1 line
2.16.4
PATCH v3 2/2 Makefile: remove old compatibility gunks
In reply to Claudio Fontana--- Makefile | 6 ------ 1 file changed, 6 deletions(-)
Makefile +0 -6
@@ -567,12 +567,6 @@ slirp/all: .git-submodule-status CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" \ CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)") -# Compatibility gunk to keep make working across the rename of targets -# for recursion, to be removed some time after 4.1. -subdir-dtc: dtc/all -subdir-capstone: capstone/all -subdir-slirp: slirp/all - $(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \ $(qom-obj-y)
Signature · 1 line
2.16.4
Re: [PATCH 2/2] Makefile: remove old compatibility gunks
Quoted 11 lines · Claudio Fontana
Signed-off-by Claudio Fontana <[email protected]>--- Makefile | 6 ------ 1 file changed, 6 deletions(-)Makefile +0
-0@@ -567,12 +567,6 @@ slirp/all: .git-submodule-status CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" \
Makefile slirp/all: .git-submodule-status · line 571
Quoted 10 lines
Makefile +0
-6CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)") -# Compatibility gunk to keep make working across the rename of targets -# for recursion, to be removed some time after 4.1. -subdir-dtc: dtc/all -subdir-capstone: capstone/all -subdir-slirp: slirp/all - $(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \ $(qom-obj-y)