Skip to contentSkip to conversation

x86: efi: Add a 64-bit coreboot payload

PATCH Superseded Simon Glass 3 participants 24 messages May 1, 2020

Subsystems (2)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover x86: efi: Add a 64-bit coreboot payload

This series creates a new 64-bit 'coreboot64' build which can be launched from coreboot. It uses SPL to effect the jump to 64-bit mode.

This was done in an attempt to get the Ubuntu FirmwareTestSuite[1] working. Unfortunately the latest version shows a splash screen and hangs, perhaps due to some missing EFI support.

[1] https://wiki.ubuntu.com/FirmwareTestSuite

Changes in v3:
- Add new patch to make coreboot detection work in 64-bit code
- Show bit width for all archs, use sizeof(void *)

Changes in v2:
- Add a new patch to indicate 32/64-bit in bdinfo

Simon Glass (7):
x86: Move coreboot-table detection to common 32/64-bit code
x86: Allow building an SPL image for coreboot
x86: Move work-around out of cpu_jump_to_64bit_uboot()
x86: Update SPL for coreboot
x86: coreboot: Allow building an SPL image
x86: Add an indication of 32/64-bit to bdinfo
x86: Add a 64-bit coreboot build

 Makefile                             |  6 ++++
 arch/x86/cpu/Makefile                |  4 ++-
 arch/x86/cpu/coreboot/Kconfig        |  1 +
 arch/x86/cpu/coreboot/Makefile       |  8 ++++-
 arch/x86/cpu/coreboot/coreboot.c     |  3 +-
 arch/x86/cpu/coreboot/coreboot_spl.c | 12 +++++++
 arch/x86/cpu/cpu.c                   | 25 +++++++++++++++
 arch/x86/cpu/i386/cpu.c              | 36 +--------------------
 arch/x86/cpu/intel_common/Makefile   |  2 ++
 arch/x86/cpu/x86_64/cpu.c            |  2 ++
 arch/x86/dts/coreboot-u-boot.dtsi    | 18 +++++++++++
 arch/x86/lib/spl.c                   | 23 ++++++++++---
 board/coreboot/coreboot/MAINTAINERS  |  7 ++++
 cmd/bdinfo.c                         | 20 ++++++++++++
 configs/coreboot64_defconfig         | 48 ++++++++++++++++++++++++++++
 doc/board/coreboot/coreboot.rst      | 10 ++++++
 16 files changed, 183 insertions(+), 42 deletions(-)
 create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
 create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
 create mode 100644 configs/coreboot64_defconfig
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#1 lore raw

PATCH v3 1/7 x86: Move coreboot-table detection to common 32/64-bit code

At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too.

---

Changes in v3:
- Add new patch to make coreboot detection work in 64-bit code

Changes in v2: None

 arch/x86/cpu/cpu.c      | 25 +++++++++++++++++++++++++
 arch/x86/cpu/i386/cpu.c | 26 +-------------------------
 2 files changed, 26 insertions(+), 25 deletions(-)
arch/x86/cpu/cpu.c +25 -0
index 8526e856d7..2e5d0ddd9f 100644
@@ -290,3 +290,28 @@ int reserve_arch(void)
 	return 0;
 }
 #endif
+
+long detect_coreboot_table_at(ulong start, ulong size)
+{
+	u32 *ptr, *end;
+
+	size /= 4;
+	for (ptr = (void *)start, end = ptr + size; ptr < end; ptr += 4) {
+		if (*ptr == 0x4f49424c) /* "LBIO" */
+			return (long)ptr;
+	}
+
+	return -ENOENT;
+}
+
+long locate_coreboot_table(void)
+{
+	long addr;
+
+	/* We look for LBIO in the first 4K of RAM and again@960KB */
+	addr = detect_coreboot_table_at(0x0, 0x1000);
+	if (addr < 0)
+		addr = detect_coreboot_table_at(0xf0000, 0x1000);
+
+	return addr;
+}
arch/x86/cpu/i386/cpu.c +1 -25
index 0312a26bbb..facd4f58a6 100644
@@ -24,6 +24,7 @@
 #include <malloc.h>
 #include <spl.h>
 #include <asm/control_regs.h>
+#include <asm/coreboot_tables.h>
 #include <asm/cpu.h>
 #include <asm/mp.h>
 #include <asm/msr.h>
@@ -447,31 +448,6 @@ int x86_cpu_init_f(void)
 	return 0;
 }
 
-long detect_coreboot_table_at(ulong start, ulong size)
-{
-	u32 *ptr, *end;
-
-	size /= 4;
-	for (ptr = (void *)start, end = ptr + size; ptr < end; ptr += 4) {
-		if (*ptr == 0x4f49424c) /* "LBIO" */
-			return (long)ptr;
-	}
-
-	return -ENOENT;
-}
-
-long locate_coreboot_table(void)
-{
-	long addr;
-
-	/* We look for LBIO in the first 4K of RAM and again@960KB */
-	addr = detect_coreboot_table_at(0x0, 0x1000);
-	if (addr < 0)
-		addr = detect_coreboot_table_at(0xf0000, 0x1000);
-
-	return addr;
-}
-
 int x86_cpu_reinit_f(void)
 {
 	setup_identity();
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#2 lore raw

PATCH v3 1/7 x86: Move coreboot-table detection to common 32/64-bit code

Quoted 7 lines · Simon Glass

At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too.

---

Quoted 9 lines

Changes in v3:
- Add new patch to make coreboot detection work in 64-bit code

Changes in v2: None

 arch/x86/cpu/cpu.c      | 25 +++++++++++++++++++++++++
 arch/x86/cpu/i386/cpu.c | 26 +-------------------------
 2 files changed, 26 insertions(+), 25 deletions(-)
#3 lore raw

PATCH v3 1/7 x86: Move coreboot-table detection to common 32/64-bit code

Quoted 14 lines · Bin Meng
Quoted 12 lines · Simon Glass

At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too.

---

Changes in v3:
- Add new patch to make coreboot detection work in 64-bit code

Changes in v2: None

Quoted 7 lines
Quoted 4 lines
 arch/x86/cpu/cpu.c      | 25 +++++++++++++++++++++++++
 arch/x86/cpu/i386/cpu.c | 26 +-------------------------
 2 files changed, 26 insertions(+), 25 deletions(-)

applied to u-boot-x86, thanks!

#4 lore raw

PATCH v3 2/7 x86: Allow building an SPL image for coreboot

In reply to Simon Glass

Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this.

---

Changes in v3: None
Changes in v2: None

 Makefile                          |  6 ++++++
 arch/x86/cpu/coreboot/Kconfig     |  1 +
 arch/x86/dts/coreboot-u-boot.dtsi | 18 ++++++++++++++++++
 3 files changed, 25 insertions(+)
 create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
Makefile +6 -0
index 6bb9cf55f2..cc99873062 100644
@@ -926,6 +926,9 @@ ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
 ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
 ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
 endif
+ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
+ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
+endif
 
 # Build a combined spl + u-boot image for sunxi
 ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
@@ -1626,6 +1629,9 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
 endif
 endif
 
+u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE
+	$(call if_changed,binman)
+
 ifneq ($(CONFIG_TEGRA),)
 ifneq ($(CONFIG_BINMAN),)
 # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
arch/x86/cpu/coreboot/Kconfig +1 -0
index c8e6a889d0..497d6284ac 100644
@@ -25,5 +25,6 @@ config SYS_COREBOOT
 	imply FS_CBFS
 	imply CBMEM_CONSOLE
 	imply X86_TSC_READ_BASE
+	select BINMAN if X86_64
 
 endif
arch/x86/dts/coreboot-u-boot.dtsi new file +18 -0
new file mode 100644
index 0000000000..38efc48d83
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Google LLC
+ * Written by Simon Glass <[email protected]>
+ */
+
+#include <config.h>
+
+/ {
+	binman {
+		filename = "u-boot-x86-with-spl.bin";
+		u-boot-spl {
+		};
+		u-boot {
+			offset = <0x10000>;
+		};
+	};
+};
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#5 lore raw

PATCH v3 2/7 x86: Allow building an SPL image for coreboot

Quoted 8 lines · Simon Glass

Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this.

---

Quoted 9 lines

Changes in v3: None
Changes in v2: None

 Makefile                          |  6 ++++++
 arch/x86/cpu/coreboot/Kconfig     |  1 +
 arch/x86/dts/coreboot-u-boot.dtsi | 18 ++++++++++++++++++
 3 files changed, 25 insertions(+)
 create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
#6 lore raw

PATCH v3 2/7 x86: Allow building an SPL image for coreboot

Quoted 20 lines · Bin Meng
Quoted 8 lines · Simon Glass

Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this.

---

Quoted 9 lines

Changes in v3: None
Changes in v2: None

 Makefile                          |  6 ++++++
 arch/x86/cpu/coreboot/Kconfig     |  1 +
 arch/x86/dts/coreboot-u-boot.dtsi | 18 ++++++++++++++++++
 3 files changed, 25 insertions(+)
 create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
Quoted 2 lines

applied to u-boot-x86, thanks!

#7 lore raw

PATCH v3 3/7 x86: Move work-around out of cpu_jump_to_64bit_uboot()

In reply to Simon Glass

At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location.

But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it.

---

Changes in v3: None
Changes in v2: None

 arch/x86/cpu/i386/cpu.c | 10 ----------
 arch/x86/lib/spl.c      | 13 +++++++++++++
 2 files changed, 13 insertions(+), 10 deletions(-)
arch/x86/cpu/i386/cpu.c +0 -10
index facd4f58a6..435e50edad 100644
@@ -614,16 +614,6 @@ int cpu_jump_to_64bit_uboot(ulong target)
 
 	func = (func_t)ptr;
 
-	/*
-	 * Copy U-Boot from ROM
-	 * TODO(sjg at chromium.org): Figure out a way to get the text base
-	 * correctly here, and in the device-tree binman definition.
-	 *
-	 * Also consider using FIT so we get the correct image length and
-	 * parameters.
-	 */
-	memcpy((char *)target, (char *)0xfff00000, 0x100000);
-
 	/* Jump to U-Boot */
 	func((ulong)pgtable, 0, (ulong)target);
 
arch/x86/lib/spl.c +13 -0
index 90baec2a17..95a89c072d 100644
@@ -207,6 +207,19 @@ static int spl_board_load_image(struct spl_image_info *spl_image,
 	spl_image->os = IH_OS_U_BOOT;
 	spl_image->name = "U-Boot";
 
+	if (!IS_ENABLED(CONFIG_SYS_COREBOOT)) {
+		/*
+		 * Copy U-Boot from ROM
+		 * TODO(sjg at chromium.org): Figure out a way to get the text base
+		 * correctly here, and in the device-tree binman definition.
+		 *
+		 * Also consider using FIT so we get the correct image length
+		 * and parameters.
+		 */
+		memcpy((char *)spl_image->load_addr, (char *)0xfff00000,
+		       0x100000);
+	}
+
 	debug("Loading to %lx\n", spl_image->load_addr);
 
 	return 0;
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#8 lore raw

PATCH v3 3/7 x86: Move work-around out of cpu_jump_to_64bit_uboot()

Quoted 10 lines · Simon Glass

At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location.

But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it.

Quoted 9 lines

---

Changes in v3: None
Changes in v2: None

 arch/x86/cpu/i386/cpu.c | 10 ----------
 arch/x86/lib/spl.c      | 13 +++++++++++++
 2 files changed, 13 insertions(+), 10 deletions(-)
#9 lore raw

PATCH v3 3/7 x86: Move work-around out of cpu_jump_to_64bit_uboot()

Quoted 17 lines · Bin Meng
Quoted 15 lines · Simon Glass

At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location.

But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it.

---

Changes in v3: None
Changes in v2: None

Quoted 7 lines
Quoted 4 lines
 arch/x86/cpu/i386/cpu.c | 10 ----------
 arch/x86/lib/spl.c      | 13 +++++++++++++
 2 files changed, 13 insertions(+), 10 deletions(-)

applied to u-boot-x86, thanks!

#10 lore raw

PATCH v3 4/7 x86: Update SPL for coreboot

In reply to Simon Glass

At present SPL only works on bare-metal builds. With a few tweaks it can be used for coreboot also.

---

Changes in v3: None
Changes in v2: None

 arch/x86/lib/spl.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
arch/x86/lib/spl.c +6 -4
index 95a89c072d..212b4d596d 100644
@@ -63,7 +63,7 @@ static int x86_spl_init(void)
 	 * is not needed. We could make this a CONFIG option or perhaps
 	 * place it immediately below CONFIG_SYS_TEXT_BASE.
 	 */
-	char *ptr = (char *)0x110000;
+	__maybe_unused char *ptr = (char *)0x110000;
 #else
 	struct udevice *punit;
 #endif
@@ -111,7 +111,8 @@ static int x86_spl_init(void)
 			      __func__, ret);
 	}
 
-#ifndef CONFIG_TPL
+#ifndef CONFIG_SYS_COREBOOT
+# ifndef CONFIG_TPL
 	memset(&__bss_start, 0, (ulong)&__bss_end - (ulong)&__bss_start);
 
 	/* TODO(sjg at chromium.org): Consider calling cpu_init_r() here */
@@ -140,7 +141,7 @@ static int x86_spl_init(void)
 		return ret;
 	}
 	mtrr_commit(true);
-#else
+# else
 	ret = syscon_get_by_driver_data(X86_SYSCON_PUNIT, &punit);
 	if (ret)
 		debug("Could not find PUNIT (err=%d)\n", ret);
@@ -148,6 +149,7 @@ static int x86_spl_init(void)
 	ret = set_max_freq();
 	if (ret)
 		debug("Failed to set CPU frequency (err=%d)\n", ret);
+# endif
 #endif
 
 	return 0;
@@ -162,7 +164,7 @@ void board_init_f(ulong flags)
 		debug("Error %d\n", ret);
 		panic("x86_spl_init fail");
 	}
-#ifdef CONFIG_TPL
+#if IS_ENABLED(CONFIG_TPL) || IS_ENABLED(CONFIG_SYS_COREBOOT)
 	gd->bd = malloc(sizeof(*gd->bd));
 	if (!gd->bd) {
 		printf("Out of memory for bd_info size %x\n", sizeof(*gd->bd));
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#12 lore raw

PATCH v3 4/7 x86: Update SPL for coreboot

Quoted 12 lines · Bin Meng
Quoted 10 lines · Simon Glass

At present SPL only works on bare-metal builds. With a few tweaks it can be used for coreboot also.

---

Changes in v3: None
Changes in v2: None

Quoted 6 lines
Quoted 3 lines
 arch/x86/lib/spl.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

applied to u-boot-x86, thanks!

#13 lore raw

PATCH v3 5/7 x86: coreboot: Allow building an SPL image

In reply to Simon Glass

Make a few adjustments to allow us to build an SPL image for coreboot.

---

Changes in v3: None
Changes in v2: None

 arch/x86/cpu/Makefile                |  4 +++-
 arch/x86/cpu/coreboot/Makefile       |  8 +++++++-
 arch/x86/cpu/coreboot/coreboot.c     |  3 ++-
 arch/x86/cpu/coreboot/coreboot_spl.c | 12 ++++++++++++
 arch/x86/cpu/intel_common/Makefile   |  2 ++
 arch/x86/cpu/x86_64/cpu.c            |  2 ++
 6 files changed, 28 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
arch/x86/cpu/Makefile +3 -1
index 307267a8fb..ee0499f5d7 100644
@@ -54,9 +54,11 @@ obj-$(CONFIG_INTEL_QUARK) += quark/
 obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
 obj-$(CONFIG_INTEL_TANGIER) += tangier/
 obj-$(CONFIG_APIC) += lapic.o ioapic.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o
 obj-$(CONFIG_$(SPL_TPL_)ACPI_GPE) += acpi_gpe.o
 obj-$(CONFIG_QFW) += qfw_cpu.o
+ifndef CONFIG_SYS_COREBOOT
+obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o
+endif
 ifndef CONFIG_$(SPL_)X86_64
 obj-$(CONFIG_SMP) += mp_init.o
 endif
arch/x86/cpu/coreboot/Makefile +7 -1
index 35b15bb1da..605f90304e 100644
@@ -11,8 +11,14 @@
 # (C) Copyright 2002
 # Daniel Engstr?m, Omicron Ceti AB, daniel at omicron.se.
 
+ifndef CONFIG_SPL
 obj-y += car.o
+endif
+ifdef CONFIG_SPL_BUILD
+obj-y += coreboot_spl.o
+else
+obj-y += sdram.o
+endif
 obj-y += coreboot.o
 obj-y += tables.o
-obj-y += sdram.o
 obj-y += timestamp.o
arch/x86/cpu/coreboot/coreboot.c +2 -1
index 0c4c6348d1..624caf67a6 100644
@@ -27,7 +27,8 @@ int arch_cpu_init(void)
 
 	timestamp_init();
 
-	return x86_cpu_init_f();
+	return IS_ENABLED(CONFIG_X86_RUN_64BIT) ? x86_cpu_reinit_f() :
+		 x86_cpu_init_f();
 }
 
 int checkcpu(void)
arch/x86/cpu/coreboot/coreboot_spl.c new file +12 -0
new file mode 100644
index 0000000000..36661871e9
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#include <common.h>
+#include <init.h>
+
+int dram_init(void)
+{
+	return 0;
+}
arch/x86/cpu/intel_common/Makefile +2 -0
index 1736bd2b53..374803b876 100644
@@ -32,6 +32,8 @@ obj-$(CONFIG_HAVE_P2SB) += p2sb.o
 
 ifdef CONFIG_SPL
 ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_SYS_COREBOOT
 obj-y += cpu_from_spl.o
 endif
 endif
+endif
arch/x86/cpu/x86_64/cpu.c +2 -0
index 90925e46ea..4b64339f25 100644
@@ -53,6 +53,7 @@ int misc_init_r(void)
 	return 0;
 }
 
+#ifndef CONFIG_SYS_COREBOOT
 int checkcpu(void)
 {
 	return 0;
@@ -62,6 +63,7 @@ int print_cpuinfo(void)
 {
 	return 0;
 }
+#endif
 
 int x86_cpu_reinit_f(void)
 {
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#14 lore raw

PATCH v3 5/7 x86: coreboot: Allow building an SPL image

Quoted 9 lines · Simon Glass

Make a few adjustments to allow us to build an SPL image for coreboot.

---

Changes in v3: None
Changes in v2: None

Quoted 9 lines
 arch/x86/cpu/Makefile                |  4 +++-
 arch/x86/cpu/coreboot/Makefile       |  8 +++++++-
 arch/x86/cpu/coreboot/coreboot.c     |  3 ++-
 arch/x86/cpu/coreboot/coreboot_spl.c | 12 ++++++++++++
 arch/x86/cpu/intel_common/Makefile   |  2 ++
 arch/x86/cpu/x86_64/cpu.c            |  2 ++
 6 files changed, 28 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
#15 lore raw

PATCH v3 5/7 x86: coreboot: Allow building an SPL image

Quoted 21 lines · Bin Meng
Quoted 9 lines · Simon Glass

Make a few adjustments to allow us to build an SPL image for coreboot.

---

Changes in v3: None
Changes in v2: None

Quoted 9 lines
 arch/x86/cpu/Makefile                |  4 +++-
 arch/x86/cpu/coreboot/Makefile       |  8 +++++++-
 arch/x86/cpu/coreboot/coreboot.c     |  3 ++-
 arch/x86/cpu/coreboot/coreboot_spl.c | 12 ++++++++++++
 arch/x86/cpu/intel_common/Makefile   |  2 ++
 arch/x86/cpu/x86_64/cpu.c            |  2 ++
 6 files changed, 28 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
Quoted 2 lines

applied to u-boot-x86, thanks!

#16 lore raw

PATCH v3 6/7 x86: Add an indication of 32/64-bit to bdinfo

In reply to Simon Glass

It is useful to know what mode U-Boot is running in. Add a message at the end of the 'bdinfo' output.

---

Changes in v3:
- Show bit width for all archs, use sizeof(void *)

Changes in v2:
- Add a new patch to indicate 32/64-bit in bdinfo

 cmd/bdinfo.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
cmd/bdinfo.c +20 -0
index d6a7175b37..34de89eb6d 100644
@@ -15,6 +15,11 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+__maybe_unused void print_cpu_word_size(void)
+{
+	printf("%-12s= %d-bit\n", "Build", (uint)sizeof(void *) * 8);
+}
+
 __maybe_unused
 static void print_num(const char *name, ulong value)
 {
@@ -208,6 +213,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_baudrate();
 	print_num("relocaddr", gd->relocaddr);
 	board_detail();
+	print_cpu_word_size();
+
 	return 0;
 }
 
@@ -227,6 +234,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -252,6 +260,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_num("fdt_blob", (ulong)gd->fdt_blob);
 	print_num("new_fdt", (ulong)gd->new_fdt);
 	print_num("fdt_size", (ulong)gd->fdt_size);
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -283,6 +292,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #endif
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -294,6 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_std_bdinfo(gd->bd);
 	print_num("relocaddr", gd->relocaddr);
 	print_num("reloc off", gd->reloc_off);
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -354,6 +365,7 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 #endif
 	if (gd->fdt_blob)
 		print_num("fdt_blob", (ulong)gd->fdt_blob);
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -368,6 +380,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_bi_flash(bd);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
+
 	return 0;
 }
 
@@ -388,6 +402,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_mhz("ethspeed",	    bd->bi_ethspeed);
 #endif
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -405,6 +420,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
 	print_num("FB base  ", gd->fb_base);
 #endif
+	print_cpu_word_size();
+
 	return 0;
 }
 
@@ -419,6 +436,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_bi_dram(bd);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -435,6 +453,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_num("reloc off", gd->reloc_off);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;
 }
@@ -448,6 +467,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_bi_mem(bd);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;
 }
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#17 lore raw

PATCH v3 6/7 x86: Add an indication of 32/64-bit to bdinfo

Am May 1, 2020 3:21:44 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 22 lines

It is useful to know what mode U-Boot is running in. Add a message at the
end of the 'bdinfo' output.

---

Changes in v3:
- Show bit width for all archs, use sizeof(void *)

Changes in v2:
- Add a new patch to indicate 32/64-bit in bdinfo

cmd/bdinfo.c | 20 ++++++++++++++++++++

1 file changed, 20 insertions(+)
cmd/bdinfo.c +0 -0
index d6a7175b37..34de89eb6d 100644

cmd/bdinfo.c line 20

Quoted 6 lines
cmd/bdinfo.c +3 -0
@@ -15,6 +15,11 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+__maybe_unused void print_cpu_word_size(void)
+{
+	printf("%-12s= %d-bit\n", "Build", (uint)sizeof(void *) * 8);

%d and uint do not match. Please, use %u for unsigned int.

Best regards

Heinrich

Quoted 116 lines
cmd/bdinfo.c +2 -0
+}
+

__maybe_unused
static void print_num(const char *name, ulong value) {

cmd/bdinfo.c +3 -0
@@ -208,6 +213,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_baudrate();
 	print_num("relocaddr", gd->relocaddr);
 	board_detail();
+	print_cpu_word_size();
+
 	return 0;
 }
@@ -227,6 +234,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +1 -0
@@ -252,6 +260,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_num("fdt_blob", (ulong)gd->fdt_blob);
 	print_num("new_fdt", (ulong)gd->new_fdt);
 	print_num("fdt_size", (ulong)gd->fdt_size);
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +1 -0
@@ -283,6 +292,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 #endif
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +1 -0
@@ -294,6 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_std_bdinfo(gd->bd);
 	print_num("relocaddr", gd->relocaddr);
 	print_num("reloc off", gd->reloc_off);
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +1 -0
@@ -354,6 +365,7 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag,
 int argc,
 #endif
 	if (gd->fdt_blob)
 		print_num("fdt_blob", (ulong)gd->fdt_blob);
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +3 -0
@@ -368,6 +380,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_bi_flash(bd);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
+
 	return 0;
 }
@@ -388,6 +402,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_mhz("ethspeed",	    bd->bi_ethspeed);
 #endif
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +3 -0
@@ -405,6 +420,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
 	print_num("FB base  ", gd->fb_base);
 #endif
+	print_cpu_word_size();
+
 	return 0;
 }
@@ -419,6 +436,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_bi_dram(bd);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +1 -0
@@ -435,6 +453,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_num("reloc off", gd->reloc_off);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;

}

cmd/bdinfo.c +1 -0
@@ -448,6 +467,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 char * const argv[])
 	print_bi_mem(bd);
 	print_eth_ip_addr();
 	print_baudrate();
+	print_cpu_word_size();
 
 	return 0;

}

#18 lore raw

PATCH v3 6/7 x86: Add an indication of 32/64-bit to bdinfo

Hi Heinrich,

Quoted 25 lines · Heinrich Schuchardt

Am May 1, 2020 3:21:44 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 23 lines

It is useful to know what mode U-Boot is running in. Add a message at the
end of the 'bdinfo' output.

---

Changes in v3:
- Show bit width for all archs, use sizeof(void *)

Changes in v2:
- Add a new patch to indicate 32/64-bit in bdinfo

cmd/bdinfo.c | 20 ++++++++++++++++++++

1 file changed, 20 insertions(+)
cmd/bdinfo.c +0 -0
index d6a7175b37..34de89eb6d 100644
@@ -15,6 +15,11 @@
 
Quoted 7 lines

cmd/bdinfo.c line 20

Quoted 5 lines
cmd/bdinfo.c +3 -0
 DECLARE_GLOBAL_DATA_PTR;
 
+__maybe_unused void print_cpu_word_size(void)
+{
+      printf("%-12s= %d-bit\n", "Build", (uint)sizeof(void *) * 8);

%d and uint do not match. Please, use %u for unsigned int.

Yes I was thinking that but somehow managed to change one without the other.

Regards,
SImon

#19 lore raw

PATCH v3 7/7 x86: Add a 64-bit coreboot build

In reply to Simon Glass

Add a build for running 64-bit U-Boot from coreboot (which is 32-bit). This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.

Coreboot boots into SPL and then SPL boots into U-Boot.

This allows running 64-bit EFI images on x86.

---

Changes in v3: None
Changes in v2: None

 board/coreboot/coreboot/MAINTAINERS |  7 +++++
 configs/coreboot64_defconfig        | 48 +++++++++++++++++++++++++++++
 doc/board/coreboot/coreboot.rst     | 10 ++++++
 3 files changed, 65 insertions(+)
 create mode 100644 configs/coreboot64_defconfig
board/coreboot/coreboot/MAINTAINERS +7 -0
index 188906b080..a05673bb0b 100644
@@ -4,3 +4,10 @@ S:	Maintained
 F:	board/coreboot/coreboot/
 F:	include/configs/chromebook_link.h
 F:	configs/coreboot_defconfig
+
+COREBOOT64 BOARD
+M:	Simon Glass <[email protected]>
+S:	Maintained
+F:	board/coreboot/coreboot/
+F:	include/configs/chromebook_link.h
+F:	configs/coreboot64_defconfig
configs/coreboot64_defconfig new file +48 -0

48 lines not on this page · raw message

doc/board/coreboot/coreboot.rst +10 -0
index fd974229eb..9c44c025a4 100644
@@ -40,3 +40,13 @@ To enable video you must enable these options in coreboot:
 At present it seems that for Minnowboard Max, coreboot does not pass through
 the video information correctly (it always says the resolution is 0x0). This
 works correctly for link though.
+
+64-bit U-Boot
+-------------
+
+In addition to the 32-bit 'coreboot' build there is a 'coreboot64' build. This
+produces an image which can be booted from coreboot (32-bit). Internally it
+works by using a 32-bit SPL binary to switch to 64-bit for running U-Boot. It
+can be useful for running UEFI applications, for example.
+
+This has only been lightly tested.
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#20 lore raw

PATCH v3 7/7 x86: Add a 64-bit coreboot build

Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 46 lines

Add a build for running 64-bit U-Boot from coreboot (which is 32-bit). This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.

Coreboot boots into SPL and then SPL boots into U-Boot.

This allows running 64-bit EFI images on x86.

---

Changes in v3: None
Changes in v2: None

board/coreboot/coreboot/MAINTAINERS |  7 +++++
configs/coreboot64_defconfig        | 48 +++++++++++++++++++++++++++++
doc/board/coreboot/coreboot.rst     | 10 ++++++
3 files changed, 65 insertions(+)

create mode 100644 configs/coreboot64_defconfig

board/coreboot/coreboot/MAINTAINERS +0 -0
index 188906b080..a05673bb0b 100644
@@ -4,3 +4,10 @@ S:	Maintained

F: board/coreboot/coreboot/
F: include/configs/chromebook_link.h
F: configs/coreboot_defconfig

board/coreboot/coreboot/MAINTAINERS +7 -0
+
+COREBOOT64 BOARD
+M:	Simon Glass <[email protected]>
+S:	Maintained
+F:	board/coreboot/coreboot/
+F:	include/configs/chromebook_link.h
+F:	configs/coreboot64_defconfig
configs/coreboot64_defconfig new file +4 -0
new file mode 100644
index 0000000000..80353b8eb3
@@ -0,0 +1,48 @@
+CONFIG_X86=y
+CONFIG_SYS_TEXT_BASE=0x1120000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_NR_DRAM_BANKS=8

configs/coreboot64_defconfig line 14

Quoted 10 lines
configs/coreboot64_defconfig new file +10 -0
+CONFIG_PRE_CON_BUF_ADDR=0x100000
+CONFIG_X86_RUN_64BIT=y
+CONFIG_VENDOR_COREBOOT=y
+CONFIG_TARGET_COREBOOT=y
+CONFIG_SPL_TEXT_BASE=0x1110000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"

Isn't this defconfig for a generic coreboot device? So why would you prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?

Best regards

Heinrich

Quoted 59 lines
configs/coreboot64_defconfig new file +34 -0
+CONFIG_PRE_CONSOLE_BUFFER=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_LAST_STAGE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IDE=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_SOUND=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MAC_PARTITION=y
+# CONFIG_SPL_MAC_PARTITION is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="coreboot"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+# CONFIG_PCI_PNP is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_I8254=y
+CONFIG_CONSOLE_SCROLL_LINES=5
doc/board/coreboot/coreboot.rst +0 -0
index fd974229eb..9c44c025a4 100644
@@ -40,3 +40,13 @@ To enable video you must enable these options in

coreboot:
At present it seems that for Minnowboard Max, coreboot does not pass through
the video information correctly (it always says the resolution is 0x0). This
works correctly for link though.

doc/board/coreboot/coreboot.rst +5 -0
+
+64-bit U-Boot
+-------------
+
+In addition to the 32-bit 'coreboot' build there is a 'coreboot64'

build. This
+produces an image which can be booted from coreboot (32-bit). Internally it
+works by using a 32-bit SPL binary to switch to 64-bit for running U-Boot. It

doc/board/coreboot/coreboot.rst +3 -0
+can be useful for running UEFI applications, for example.
+
+This has only been lightly tested.
#21 lore raw

PATCH v3 7/7 x86: Add a 64-bit coreboot build

HI Heinrich,

Quoted 52 lines · Heinrich Schuchardt

Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 50 lines

Add a build for running 64-bit U-Boot from coreboot (which is 32-bit). This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.

Coreboot boots into SPL and then SPL boots into U-Boot.

This allows running 64-bit EFI images on x86.

---

Changes in v3: None
Changes in v2: None

board/coreboot/coreboot/MAINTAINERS |  7 +++++
configs/coreboot64_defconfig        | 48 +++++++++++++++++++++++++++++
doc/board/coreboot/coreboot.rst     | 10 ++++++
3 files changed, 65 insertions(+)

create mode 100644 configs/coreboot64_defconfig

board/coreboot/coreboot/MAINTAINERS +0 -0
index 188906b080..a05673bb0b 100644
@@ -4,3 +4,10 @@ S:    Maintained
F:    board/coreboot/coreboot/
F:    include/configs/chromebook_link.h
F:    configs/coreboot_defconfig
board/coreboot/coreboot/MAINTAINERS +7 -0
+
+COREBOOT64 BOARD
+M:    Simon Glass <[email protected]>
+S:    Maintained
+F:    board/coreboot/coreboot/
+F:    include/configs/chromebook_link.h
+F:    configs/coreboot64_defconfig
configs/coreboot64_defconfig new file +8 -0
new file mode 100644
index 0000000000..80353b8eb3
@@ -0,0 +1,48 @@
+CONFIG_X86=y
+CONFIG_SYS_TEXT_BASE=0x1120000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_PRE_CON_BUF_ADDR=0x100000
+CONFIG_X86_RUN_64BIT=y
+CONFIG_VENDOR_COREBOOT=y
+CONFIG_TARGET_COREBOOT=y
Quoted 8 lines

configs/coreboot64_defconfig line 14

Quoted 6 lines
configs/coreboot64_defconfig new file +6 -0
+CONFIG_SPL_TEXT_BASE=0x1110000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"

Isn't this defconfig for a generic coreboot device? So why would you prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?

What do you suggest?

This matches the coreboot board and is the default boot device on one board that uses this.

Perhaps we should be finding out the bootdevice from coreboot? But in any case, people can add their own script.

Regards,
Simon

#22 lore raw

PATCH v3 7/7 x86: Add a 64-bit coreboot build

Am May 1, 2020 4:04:06 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 66 lines

HI Heinrich,

Quoted 3 lines · Heinrich Schuchardt

Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 1 line

Add a build for running 64-bit U-Boot from coreboot (which is

32-bit).

Quoted 9 lines
Quoted 9 lines

This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.

Coreboot boots into SPL and then SPL boots into U-Boot.

This allows running 64-bit EFI images on x86.

---

Quoted 5 lines
Quoted 5 lines

Changes in v3: None
Changes in v2: None

board/coreboot/coreboot/MAINTAINERS | 7 +++++
configs/coreboot64_defconfig | 48

+++++++++++++++++++++++++++++

Quoted 35 lines
Quoted 35 lines

doc/board/coreboot/coreboot.rst | 10 ++++++

3 files changed, 65 insertions(+)

create mode 100644 configs/coreboot64_defconfig

board/coreboot/coreboot/MAINTAINERS +0 -0
index 188906b080..a05673bb0b 100644
@@ -4,3 +4,10 @@ S:    Maintained
F:    board/coreboot/coreboot/
F:    include/configs/chromebook_link.h
F:    configs/coreboot_defconfig
board/coreboot/coreboot/MAINTAINERS +7 -0
+
+COREBOOT64 BOARD
+M:    Simon Glass <[email protected]>
+S:    Maintained
+F:    board/coreboot/coreboot/
+F:    include/configs/chromebook_link.h
+F:    configs/coreboot64_defconfig
configs/coreboot64_defconfig new file +8 -0
new file mode 100644
index 0000000000..80353b8eb3
@@ -0,0 +1,48 @@
+CONFIG_X86=y
+CONFIG_SYS_TEXT_BASE=0x1120000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_PRE_CON_BUF_ADDR=0x100000
+CONFIG_X86_RUN_64BIT=y
+CONFIG_VENDOR_COREBOOT=y
+CONFIG_TARGET_COREBOOT=y
Quoted 8 lines

configs/coreboot64_defconfig line 14

Quoted 6 lines
configs/coreboot64_defconfig new file +6 -0
+CONFIG_SPL_TEXT_BASE=0x1110000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"

Isn't this defconfig for a generic coreboot device? So why would you

Quoted 8 lines

prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?

What do you suggest?

This matches the coreboot board and is the default boot device on one board that uses this.

I thought this patch series is about boards booted via the fimware "Coreboot" and not a specific board by chance also called "Coreboot". Please, clarify this in the commit message.

And if this defconfig is for a specific board called "Coreboot" couldn't you add some indication of the vendor name to the defconfig filename to avoid further misunderstandings.

Best regards

Heinrich

Quoted 5 lines

Perhaps we should be finding out the bootdevice from coreboot? But in any case, people can add their own script.

Regards,
Simon

#23 lore raw

PATCH v3 7/7 x86: Add a 64-bit coreboot build

Hi Simon,

Quoted 77 lines · Heinrich Schuchardt

Am May 1, 2020 4:04:06 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 66 lines

HI Heinrich,

Quoted 3 lines · Heinrich Schuchardt

Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass <[email protected]>:

Quoted 1 line

Add a build for running 64-bit U-Boot from coreboot (which is

32-bit).

Quoted 9 lines
Quoted 9 lines

This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.

Coreboot boots into SPL and then SPL boots into U-Boot.

This allows running 64-bit EFI images on x86.

---

Quoted 5 lines
Quoted 5 lines

Changes in v3: None
Changes in v2: None

board/coreboot/coreboot/MAINTAINERS | 7 +++++
configs/coreboot64_defconfig | 48

+++++++++++++++++++++++++++++

Quoted 35 lines
Quoted 35 lines

doc/board/coreboot/coreboot.rst | 10 ++++++

3 files changed, 65 insertions(+)

create mode 100644 configs/coreboot64_defconfig

board/coreboot/coreboot/MAINTAINERS +0 -0
index 188906b080..a05673bb0b 100644
@@ -4,3 +4,10 @@ S:    Maintained
F:    board/coreboot/coreboot/
F:    include/configs/chromebook_link.h
F:    configs/coreboot_defconfig
board/coreboot/coreboot/MAINTAINERS +7 -0
+
+COREBOOT64 BOARD
+M:    Simon Glass <[email protected]>
+S:    Maintained
+F:    board/coreboot/coreboot/
+F:    include/configs/chromebook_link.h
+F:    configs/coreboot64_defconfig
configs/coreboot64_defconfig new file +8 -0
new file mode 100644
index 0000000000..80353b8eb3
@@ -0,0 +1,48 @@
+CONFIG_X86=y
+CONFIG_SYS_TEXT_BASE=0x1120000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_PRE_CON_BUF_ADDR=0x100000
+CONFIG_X86_RUN_64BIT=y
+CONFIG_VENDOR_COREBOOT=y
+CONFIG_TARGET_COREBOOT=y
Quoted 8 lines

configs/coreboot64_defconfig line 14

Quoted 6 lines
configs/coreboot64_defconfig new file +6 -0
+CONFIG_SPL_TEXT_BASE=0x1110000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"

Isn't this defconfig for a generic coreboot device? So why would you

Quoted 8 lines

prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?

What do you suggest?

This matches the coreboot board and is the default boot device on one board that uses this.

Quoted 6 lines

I thought this patch series is about boards booted via the fimware "Coreboot" and not a specific board by chance also called "Coreboot". Please, clarify this in the commit message.

And if this defconfig is for a specific board called "Coreboot" couldn't you add some indication of the vendor name to the defconfig filename to avoid further misunderstandings.

Best regards

I left this patch unapplied since Heinrich has some comments. Please rebase the next version on top of u-boot-x86/master.

Regards,
Bin