Skip to contentSkip to conversation

ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet

PATCH In review Hans de Goede 3 participants 3 messages May 18, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet

The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low).

Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV.

---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +12 -0
index 08f4ae964b02..fbfd53874b47 100644
@@ -742,6 +742,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Toshiba Encore WT8-A */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"),
+		},
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_JD_NOT_INV |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
Signature · 1 line
2.26.2
Acked-by on v1 1/1
#1 lore raw
Quoted 9 lines · Hans de Goede

The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low).

Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV.

Thanks Hans!

Quoted 28 lines
---
  sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
  1 file changed, 12 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +12 -0
index 08f4ae964b02..fbfd53874b47 100644
@@ -742,6 +742,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
  					BYT_RT5640_SSP0_AIF1 |
  					BYT_RT5640_MCLK_EN),
  	},
+	{	/* Toshiba Encore WT8-A */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"),
+		},
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_JD_NOT_INV |
+					BYT_RT5640_MCLK_EN),
+	},
  	{	/* Catch-all for generic Insyde tablets, must be last */
  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
maintainer
#2 lore raw
In reply to Hans de Goede
Quoted 7 lines · Hans de Goede

The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low).

Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.8

Thanks!

[1/1] ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet

      commit: 0e0e10fde0e9808d1991268f5dca69fb36c025f7

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark