board/freescale: increase the vfat size
Fabio Estevam
reviewerPATCH 1/1 board/freescale: increase the vfat size
i.MX8 targets typically use the standard ARM64 defconfig, which builds lots of ARM64 platforms leading to super large kernels that can easily not fit within the current 32MB size for vfat.
Increase the vfat size to better accomodate such large kernels.
--- board/freescale/common/imx/genimage.cfg.template_imx8 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/freescale/common/imx/genimage.cfg.template_imx8 +1 -1
@@ -14,7 +14,7 @@ image boot.vfat { %FILES% } } - size = 32M + size = 64M } image sdcard.img {
Signature · 1 line
2.17.1
PATCH 1/1 board/freescale: increase the vfat size
Fabio, All,
On 2020-05-26 18:01 -0300, Fabio Estevam spake thusly:
Quoted 5 lines
i.MX8 targets typically use the standard ARM64 defconfig, which builds lots of ARM64 platforms leading to super large kernels that can easily not fit within the current 32MB size for vfat.
Increase the vfat size to better accomodate such large kernels.
The genimage config files we have do accomodate the needs for the defconfigs they are used in. So, if all the in-tree defconfigs still build with the current size,t this is OK.
That a user then tweaks it locally for their use-case, is not a reason IMHO to carry such a change.
So, question: does this fix an actual build failure of any of the i.MX8 defconfig that we have in-tree in Buildroot? If so, then this should be explcictly stated in the commit log.
Otherwise, there is no reason to catter for out-of-tree use-cases, otherwise there will always be someone that come next and state "This package makes sense for my use-case, but it does not fit in the default size, so increase it". This is not tenable.
Still, 32M is quite low for today's standards, and we want users to be relatively at ease to experiment on the default image anyway.
So: applied to master, with a slightly tweaked commit log. Thanks.
Regards,
Yann E. MORIN.
Quoted 25 lines
Signed-off-by Fabio Estevam <[email protected]>--- board/freescale/common/imx/genimage.cfg.template_imx8 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/freescale/common/imx/genimage.cfg.template_imx8 +1
-1@@ -14,7 +14,7 @@ image boot.vfat { %FILES% } } - size = 32M + size = 64M } image sdcard.img {Signature · 6 lines
2.17.1 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Fabio Estevam
reviewerPATCH 1/1 board/freescale: increase the vfat size
Hi Yann,
Quoted 3 lines · Yann E. MORIN
So, question: does this fix an actual build failure of any of the i.MX8 defconfig that we have in-tree in Buildroot? If so, then this should be explcictly stated in the commit log.
I noticed this problem when trying to flash a kernel generated by the standard 'defconfig' from an NXP internal tree.
The kernel size was around 35MB.
Soon this kernel will be publicly available and we will need to increase the vfat size to accommodate it.
Thanks for applying it!
PATCH 1/1 board/freescale: increase the vfat size
In reply to Fabio EstevamQuoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Estevam <[email protected]> writes:
i.MX8 targets typically use the standard ARM64 defconfig, which builds lots of ARM64 platforms leading to super large kernels that can easily not fit within the current 32MB size for vfat.
Increase the vfat size to better accomodate such large kernels.
Signed-off-by Fabio Estevam <[email protected]>
Committed to 2020.02.x, thanks.
Signature · 1 line
Bye, Peter Korsgaard