python: add mypy support to python/qemu
PATCH v2 2/16 iotests.py: use qemu.qmp type aliases
In reply to John Snowiotests.py should use the type definitions from qmp.py instead of its own.
--- tests/qemu-iotests/iotests.py | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
tests/qemu-iotests/iotests.py +3 -6
@@ -35,13 +35,10 @@ # pylint: disable=import-error, wrong-import-position sys.path.append(os.path.join(os.path.dirname(__file__), '..', '..', 'python')) from qemu import qtest +from qemu.qmp import QMPMessage assert sys.version_info >= (3, 6) -# Type Aliases -QMPResponse = Dict[str, Any] - - # Use this logger for logging messages directly from the iotests module logger = logging.getLogger('qemu.iotests') logger.addHandler(logging.NullHandler())
@@ -554,7 +551,7 @@ def add_incoming(self, addr): self._args.append(addr) return self - def hmp(self, command_line: str, use_log: bool = False) -> QMPResponse: + def hmp(self, command_line: str, use_log: bool = False) -> QMPMessage: cmd = 'human-monitor-command' kwargs = {'command-line': command_line} if use_log:
@@ -575,7 +572,7 @@ def resume_drive(self, drive: str) -> None: self.hmp(f'qemu-io {drive} "remove_break bp_{drive}"') def hmp_qemu_io(self, drive: str, cmd: str, - use_log: bool = False) -> QMPResponse: + use_log: bool = False) -> QMPMessage: """Write to a given drive using an HMP command""" return self.hmp(f'qemu-io {drive} "{cmd}"', use_log=use_log)
Signature · 1 line
2.21.3
PATCH v2 1/16 python/qmp.py: Define common types
In reply to John SnowDefine some common types that we'll need to annotate a lot of other functions going forward.
--- python/qemu/qmp.py | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
python/qemu/qmp.py +18 -0
@@ -12,13 +12,31 @@ import socket import logging from typing import ( + Any, + Dict, Optional, TextIO, Type, + Tuple, + Union, ) from types import TracebackType +# QMPMessage is a QMP Message of any kind. +# e.g. {'yee': 'haw'} +# +# QMPReturnValue is the inner value of return values only. +# {'return': {}} is the QMPMessage, +# {} is the QMPReturnValue. +QMPMessage = Dict[str, Any] +QMPReturnValue = Dict[str, Any] + +InternetAddrT = Tuple[str, str] +UnixAddrT = str +SocketAddrT = Union[InternetAddrT, UnixAddrT] + + class QMPError(Exception): """ QMP base exception
Signature · 1 line
2.21.3
PATCH v2 4/16 python/qmp.py: Do not return None from cmd_obj
In reply to John SnowThis makes typing the qmp library difficult, as it necessitates wrapping Optional[] around the type for every return type up the stack. At some point, it becomes difficult to discern or remember why it's None instead of the expected object.
Use the python exception system to tell us exactly why we didn't get an object. Remove this special-cased return.
--- python/qemu/qmp.py | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)
python/qemu/qmp.py +5 -9
@@ -225,22 +225,18 @@ def accept(self, timeout=15.0): self.__sockfile = self.__sock.makefile(mode='r') return self.__negotiate_capabilities() - def cmd_obj(self, qmp_cmd): + def cmd_obj(self, qmp_cmd: QMPMessage) -> QMPMessage: """ Send a QMP command to the QMP Monitor. @param qmp_cmd: QMP command to be sent as a Python dict - @return QMP response as a Python dict or None if the connection has - been closed + @return QMP response as a Python dict """ self.logger.debug(">>> %s", qmp_cmd) - try: - self.__sock.sendall(json.dumps(qmp_cmd).encode('utf-8')) - except OSError as err: - if err.errno == errno.EPIPE: - return None - raise err + self.__sock.sendall(json.dumps(qmp_cmd).encode('utf-8')) resp = self.__json_read() + if resp is None: + raise QMPConnectError("Unexpected empty reply from server") self.logger.debug("<<< %s", resp) return resp
Signature · 1 line
2.21.3
PATCH v2 3/16 python/qmp.py: re-absorb MonitorResponseError
In reply to John SnowWhen I initially split this out, I considered this more of a machine error than a QMP protocol error, but I think that's misguided.
Move this back to qmp.py and name it QMPResponseError. Convert qmp.command() to use this exception type.
--- python/qemu/machine.py | 15 +-------------- python/qemu/qmp.py | 17 +++++++++++++++-- scripts/render_block_graph.py | 7 +++++-- 3 files changed, 21 insertions(+), 18 deletions(-)
python/qemu/machine.py +1 -14
@@ -48,19 +48,6 @@ class QEMUMachineAddDeviceError(QEMUMachineError): """ -class MonitorResponseError(qmp.QMPError): - """ - Represents erroneous QMP monitor reply - """ - def __init__(self, reply): - try: - desc = reply["error"]["desc"] - except KeyError: - desc = reply - super().__init__(desc) - self.reply = reply - - class QEMUMachine: """ A QEMU VM
@@ -464,7 +451,7 @@ def command(self, cmd, conv_keys=True, **args): if reply is None: raise qmp.QMPError("Monitor is closed") if "error" in reply: - raise MonitorResponseError(reply) + raise qmp.QMPResponseError(reply) return reply["return"] def get_qmp_event(self, wait=False):
python/qemu/qmp.py +15 -2
@@ -61,6 +61,19 @@ class QMPTimeoutError(QMPError): """ +class QMPResponseError(QMPError): + """ + Represents erroneous QMP monitor reply + """ + def __init__(self, reply: QMPMessage): + try: + desc = reply['error']['desc'] + except KeyError: + desc = reply + super().__init__(desc) + self.reply = reply + + class QEMUMonitorProtocol: """ Provide an API to connect to QEMU via QEMU Monitor Protocol (QMP) and then
@@ -251,8 +264,8 @@ def command(self, cmd, **kwds): Build and send a QMP command to the monitor, report errors if any """ ret = self.cmd(cmd, kwds) - if "error" in ret: - raise Exception(ret['error']['desc']) + if 'error' in ret: + raise QMPResponseError(ret) return ret['return'] def pull_event(self, wait=False):
scripts/render_block_graph.py +5 -2
@@ -25,7 +25,10 @@ from graphviz import Digraph sys.path.append(os.path.join(os.path.dirname(__file__), '..', 'python')) -from qemu.machine import MonitorResponseError +from qemu.qmp import ( + QEMUMonitorProtocol, + QMPResponseError, +) def perm(arr):
@@ -102,7 +105,7 @@ def command(self, cmd): reply = json.loads(subprocess.check_output(ar)) if 'error' in reply: - raise MonitorResponseError(reply) + raise QMPResponseError(reply) return reply['return']
Signature · 1 line
2.21.3
v2 cover python: add mypy support to python/qemu
Requires: [email protected]
This series is extracted from my larger series that attempted to bundle our python module as an installable module. These fixes don't require that, so they are being sent first as I think there's less up for debate in here.
This requires my "refactor shutdown" patch as a pre-requisite.
"v2":
- This version supports iotests 297
- Many patches merged by Phil are removed
- Replaces iotests.py type aliases with centralized ones (See patch 2)
- Imports etc are reworked to use the non-installable package layout instead. (Mostly important for patch 3)
Testing this out:
- You'll need Python3.6+
- I encourage you to use a virtual environment!
- You don't necessarily need these exact versions, but I didn't test the lower bounds, use older versions at your peril:
- pylint==2.5.0
- mypy=0.770
- flake8=3.7.8
Quoted 5 lines
cd ~/src/qemu/python/
flake8 qemu
mypy --strict qemu
cd qemu
pylint *.py
These should all 100% pass.
---
Open RFC: What's the right way to hook this into make check to prevent regressions?
John Snow (16):
python/qmp.py: Define common types iotests.py: use qemu.qmp type aliases python/qmp.py: re-absorb MonitorResponseError python/qmp.py: Do not return None from cmd_obj python/qmp.py: add casts to JSON deserialization python/qmp.py: add QMPProtocolError python/machine.py: Fix monitor address typing python/machine.py: reorder __init__ python/machine.py: Don't modify state in _base_args() python/machine.py: Handle None events in event_wait python/machine.py: use qmp.command python/machine.py: Add _qmp access shim python/machine.py: fix _popen access python/qemu: make 'args' style arguments immutable iotests.py: Adjust HMP kwargs typing python/qemu: Add mypy type annotations
python/qemu/accel.py | 8 +- python/qemu/machine.py | 267 ++++++++++++++++++++-------------- python/qemu/qmp.py | 111 ++++++++++---- python/qemu/qtest.py | 54 ++++--- scripts/render_block_graph.py | 7 +- tests/qemu-iotests/iotests.py | 11 +- 6 files changed, 285 insertions(+), 173 deletions(-)
Signature · 1 line
2.21.3
PATCH v2 6/16 python/qmp.py: add QMPProtocolError
In the case that we receive a reply but are unable to understand it, use this exception name to indicate that case.
--- python/qemu/qmp.py | 10 ++++++++++ 1 file changed, 10 insertions(+)
python/qemu/qmp.py +10 -0
@@ -62,6 +62,12 @@ class QMPTimeoutError(QMPError): """ +class QMPProtocolError(QMPError): + """ + QMP protocol error; unexpected response + """ + + class QMPResponseError(QMPError): """ Represents erroneous QMP monitor reply
@@ -266,6 +272,10 @@ def command(self, cmd, **kwds): ret = self.cmd(cmd, kwds) if 'error' in ret: raise QMPResponseError(ret) + if 'return' not in ret: + raise QMPProtocolError( + "'return' key not found in QMP response '{}'".format(str(ret)) + ) return cast(QMPReturnValue, ret['return']) def pull_event(self, wait=False):
Signature · 1 line
2.21.3
PATCH v2 5/16 python/qmp.py: add casts to JSON deserialization
In reply to John Snowmypy and python type hints are not powerful enough to properly describe JSON messages in Python 3.6. The best we can do, generally, is describe them as Dict[str, Any].
Add casts to coerce this type for static analysis; but do NOT enforce this type at runtime in any way.
Note: Python 3.8 adds a TypedDict construct which allows for the description of more arbitrary Dictionary shapes. There is a third-party module, "Pydantic", which is compatible with 3.6 that can be used instead of the JSON library that parses JSON messages to fully-typed Python objects, and may be preferable in some cases.
(That is well beyond the scope of this commit or series.)
--- python/qemu/qmp.py | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
python/qemu/qmp.py +6 -2
@@ -13,6 +13,7 @@ import logging from typing import ( Any, + cast, Dict, Optional, TextIO,
@@ -130,7 +131,10 @@ def __json_read(self, only_event=False): data = self.__sockfile.readline() if not data: return None - resp = json.loads(data) + # By definition, any JSON received from QMP is a QMPMessage, + # and we are asserting only at static analysis time that it + # has a particular shape. + resp = cast(QMPMessage, json.loads(data)) if 'event' in resp: self.logger.debug("<<< %s", resp) self.__events.append(resp)
@@ -262,7 +266,7 @@ def command(self, cmd, **kwds): ret = self.cmd(cmd, kwds) if 'error' in ret: raise QMPResponseError(ret) - return ret['return'] + return cast(QMPReturnValue, ret['return']) def pull_event(self, wait=False): """
Signature · 1 line
2.21.3
PATCH v2 7/16 python/machine.py: Fix monitor address typing
In reply to John SnowPrior to this, it's difficult for mypy to intuit what the concrete type of the monitor address is; it has difficulty inferring the type across two variables.
Create _monitor_address as a property that always returns a valid address to simply static type analysis.
To preserve our ability to clean up, use a simple boolean to indicate whether or not we should try to clean up the sock file after execution.
--- python/qemu/machine.py | 45 +++++++++++++++++++++++++++--------------- 1 file changed, 29 insertions(+), 16 deletions(-)
python/qemu/machine.py +29 -16
@@ -24,10 +24,14 @@ import shutil import socket import tempfile -from typing import Optional, Type +from typing import ( + Optional, + Type, +) from types import TracebackType from . import qmp +from .qmp import SocketAddrT LOG = logging.getLogger(__name__)
@@ -61,7 +65,8 @@ class QEMUMachine: """ def __init__(self, binary, args=None, wrapper=None, name=None, - test_dir="/var/tmp", monitor_address=None, + test_dir="/var/tmp", + monitor_address: Optional[SocketAddrT] = None, socket_scm_helper=None, sock_dir=None): ''' Initialize a QEMUMachine
@@ -84,8 +89,14 @@ def __init__(self, binary, args=None, wrapper=None, name=None, if sock_dir is None: sock_dir = test_dir self._name = name - self._monitor_address = monitor_address - self._vm_monitor = None + if monitor_address is not None: + self._monitor_address = monitor_address + self._remove_monitor_sockfile = False + else: + self._monitor_address = os.path.join( + sock_dir, f"{name}-monitor.sock" + ) + self._remove_monitor_sockfile = True self._qemu_log_path = None self._qemu_log_file = None self._popen = None
@@ -223,15 +234,17 @@ def _load_io_log(self): def _base_args(self): args = ['-display', 'none', '-vga', 'none'] + if self._qmp_set: if isinstance(self._monitor_address, tuple): - moncdev = "socket,id=mon,host=%s,port=%s" % ( - self._monitor_address[0], - self._monitor_address[1]) + moncdev = "socket,id=mon,host={},port={}".format( + *self._monitor_address + ) else: - moncdev = 'socket,id=mon,path=%s' % self._vm_monitor + moncdev = f"socket,id=mon,path={self._monitor_address}" args.extend(['-chardev', moncdev, '-mon', 'chardev=mon,mode=control']) + if self._machine is not None: args.extend(['-machine', self._machine]) for _ in range(self._console_index):
@@ -256,14 +269,14 @@ def _pre_launch(self): self._qemu_log_file = open(self._qemu_log_path, 'wb') if self._qmp_set: - if self._monitor_address is not None: - self._vm_monitor = self._monitor_address - else: - self._vm_monitor = os.path.join(self._sock_dir, - self._name + "-monitor.sock") - self._remove_files.append(self._vm_monitor) - self._qmp = qmp.QEMUMonitorProtocol(self._vm_monitor, server=True, - nickname=self._name) + if self._remove_monitor_sockfile: + assert isinstance(self._monitor_address, str) + self._remove_files.append(self._monitor_address) + self._qmp = qmp.QEMUMonitorProtocol( + self._monitor_address, + server=True, + nickname=self._name + ) def _post_launch(self): if self._qmp:
Signature · 1 line
2.21.3
PATCH v2 9/16 python/machine.py: Don't modify state in _base_args()
In reply to John SnowDon't append to the _remove_files list during _base_args; instead do so during _launch. Rework _base_args as a @property to help facilitate this impression.
This has the additional benefit of making the type of _console_address easier to analyze statically.
--- python/qemu/machine.py | 16 ++++++++++------ python/qemu/qtest.py | 11 ++++++++--- 2 files changed, 18 insertions(+), 9 deletions(-)
python/qemu/machine.py +10 -6
@@ -25,6 +25,7 @@ import socket import tempfile from typing import ( + List, Optional, Type, )
@@ -122,7 +123,9 @@ def __init__(self, binary, args=None, wrapper=None, name=None, self._console_index = 0 self._console_set = False self._console_device_type = None - self._console_address = None + self._console_address = os.path.join( + self._sock_dir, f"{self._name}-console.sock" + ) self._console_socket = None self._remove_files = []
@@ -237,7 +240,8 @@ def _load_io_log(self): with open(self._qemu_log_path, "r") as iolog: self._iolog = iolog.read() - def _base_args(self): + @property + def _base_args(self) -> List[str]: args = ['-display', 'none', '-vga', 'none'] if self._qmp_set:
@@ -255,9 +259,6 @@ def _base_args(self): for _ in range(self._console_index): args.extend(['-serial', 'null']) if self._console_set: - self._console_address = os.path.join(self._sock_dir, - self._name + "-console.sock") - self._remove_files.append(self._console_address) chardev = ('socket,id=console,path=%s,server,nowait' % self._console_address) args.extend(['-chardev', chardev])
@@ -273,6 +274,9 @@ def _pre_launch(self): self._qemu_log_path = os.path.join(self._temp_dir, self._name + ".log") self._qemu_log_file = open(self._qemu_log_path, 'wb') + if self._console_set: + self._remove_files.append(self._console_address) + if self._qmp_set: if self._remove_monitor_sockfile: assert isinstance(self._monitor_address, str)
@@ -345,7 +349,7 @@ def _launch(self): devnull = open(os.path.devnull, 'rb') self._pre_launch() self._qemu_full_args = (self._wrapper + [self._binary] + - self._base_args() + self._args) + self._base_args + self._args) LOG.debug('VM launch command: %r', ' '.join(self._qemu_full_args)) self._popen = subprocess.Popen(self._qemu_full_args, stdin=devnull,
python/qemu/qtest.py +8 -3
@@ -19,7 +19,11 @@ import socket import os -from typing import Optional, TextIO +from typing import ( + List, + Optional, + TextIO, +) from .machine import QEMUMachine
@@ -111,8 +115,9 @@ def __init__(self, binary, args=None, name=None, test_dir="/var/tmp", self._qtest = None self._qtest_path = os.path.join(sock_dir, name + "-qtest.sock") - def _base_args(self): - args = super()._base_args() + @property + def _base_args(self) -> List[str]: + args = super()._base_args args.extend(['-qtest', 'unix:path=' + self._qtest_path, '-accel', 'qtest']) return args
Signature · 1 line
2.21.3
PATCH v2 14/16 python/qemu: make 'args' style arguments immutable
In reply to John SnowThese arguments don't need to be mutable and aren't really used as such. Clarify their types as immutable and adjust code to match where necessary.
In general, It's probably best not to accept a user-defined mutable object and store it as internal object state unless there's a strong justification for doing so. Instead, try to use generic types as input with empty tuples as the default, and coerce to list where necessary.
--- python/qemu/machine.py | 30 +++++++++++++++++------------- python/qemu/qtest.py | 16 ++++++++++++---- 2 files changed, 29 insertions(+), 17 deletions(-)
python/qemu/machine.py +17 -13
@@ -18,6 +18,7 @@ # import errno +from itertools import chain import logging import os import subprocess
@@ -29,6 +30,8 @@ Dict, List, Optional, + Sequence, + Tuple, Type, ) from types import TracebackType
@@ -67,8 +70,12 @@ class QEMUMachine: # vm is guaranteed to be shut down here """ - def __init__(self, binary, args=None, wrapper=None, name=None, - test_dir="/var/tmp", + def __init__(self, + binary: str, + args: Sequence[str] = (), + wrapper: Sequence[str] = (), + name: Optional[str] = None, + test_dir: str = "/var/tmp", monitor_address: Optional[SocketAddrT] = None, socket_scm_helper=None, sock_dir=None): '''
@@ -86,14 +93,7 @@ def __init__(self, binary, args=None, wrapper=None, name=None, # Direct user configuration self._binary = binary - - if args is None: - args = [] - # Copy mutable input: we will be modifying our copy self._args = list(args) - - if wrapper is None: - wrapper = [] self._wrapper = wrapper self._name = name or "qemu-%d" % os.getpid()
@@ -118,7 +118,7 @@ def __init__(self, binary, args=None, wrapper=None, name=None, self._iolog = None self._qmp_set = True # Enable QMP monitor by default. self._qmp_connection: Optional[qmp.QEMUMonitorProtocol] = None - self._qemu_full_args = None + self._qemu_full_args: Tuple[str, ...] = () self._temp_dir = None self._launched = False self._machine = None
@@ -336,7 +336,7 @@ def launch(self): raise QEMUMachineError('VM already launched') self._iolog = None - self._qemu_full_args = None + self._qemu_full_args = () try: self._launch() self._launched = True
@@ -356,8 +356,12 @@ def _launch(self): """ devnull = open(os.path.devnull, 'rb') self._pre_launch() - self._qemu_full_args = (self._wrapper + [self._binary] + - self._base_args + self._args) + self._qemu_full_args = tuple( + chain(self._wrapper, + [self._binary], + self._base_args, + self._args) + ) LOG.debug('VM launch command: %r', ' '.join(self._qemu_full_args)) self._popen = subprocess.Popen(self._qemu_full_args, stdin=devnull,
python/qemu/qtest.py +12 -4
@@ -22,6 +22,7 @@ from typing import ( List, Optional, + Sequence, TextIO, )
@@ -103,8 +104,13 @@ class QEMUQtestMachine(QEMUMachine): A QEMU VM, with a qtest socket available. """ - def __init__(self, binary, args=None, name=None, test_dir="/var/tmp", - socket_scm_helper=None, sock_dir=None): + def __init__(self, + binary: str, + args: Sequence[str] = (), + name: Optional[str] = None, + test_dir: str = "/var/tmp", + socket_scm_helper: Optional[str] = None, + sock_dir: Optional[str] = None): if name is None: name = "qemu-%d" % os.getpid() if sock_dir is None:
@@ -118,8 +124,10 @@ def __init__(self, binary, args=None, name=None, test_dir="/var/tmp", @property def _base_args(self) -> List[str]: args = super()._base_args - args.extend(['-qtest', 'unix:path=' + self._qtest_path, - '-accel', 'qtest']) + args.extend([ + '-qtest', f"unix:path={self._qtest_path}", + '-accel', 'qtest' + ]) return args def _pre_launch(self):
Signature · 1 line
2.21.3
PATCH v2 8/16 python/machine.py: reorder __init__
In reply to John SnowPut the init arg handling all at the top, and mostly in order (deviating when one is dependent on another), and put what is effectively runtime state declaration at the bottom.
--- python/qemu/machine.py | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-)
python/qemu/machine.py +17 -12
@@ -80,38 +80,43 @@ def __init__(self, binary, args=None, wrapper=None, name=None, @param socket_scm_helper: helper program, required for send_fd_scm() @note: Qemu process is not started until launch() is used. ''' + # Direct user configuration + + self._binary = binary + if args is None: args = [] + # Copy mutable input: we will be modifying our copy + self._args = list(args) + if wrapper is None: wrapper = [] - if name is None: - name = "qemu-%d" % os.getpid() - if sock_dir is None: - sock_dir = test_dir - self._name = name + self._wrapper = wrapper + + self._name = name or "qemu-%d" % os.getpid() + self._test_dir = test_dir + self._sock_dir = sock_dir or self._test_dir + self._socket_scm_helper = socket_scm_helper + if monitor_address is not None: self._monitor_address = monitor_address self._remove_monitor_sockfile = False else: self._monitor_address = os.path.join( - sock_dir, f"{name}-monitor.sock" + self._sock_dir, f"{self._name}-monitor.sock" ) self._remove_monitor_sockfile = True + + # Runstate self._qemu_log_path = None self._qemu_log_file = None self._popen = None - self._binary = binary - self._args = list(args) # Force copy args in case we modify them - self._wrapper = wrapper self._events = [] self._iolog = None - self._socket_scm_helper = socket_scm_helper self._qmp_set = True # Enable QMP monitor by default. self._qmp = None self._qemu_full_args = None - self._test_dir = test_dir self._temp_dir = None - self._sock_dir = sock_dir self._launched = False self._machine = None self._console_index = 0
Signature · 1 line
2.21.3
PATCH v2 10/16 python/machine.py: Handle None events in event_wait
In reply to John SnowIf the timeout is 0, we can get None back. Handle this explicitly.
--- python/qemu/machine.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
python/qemu/machine.py +5 -1
@@ -32,7 +32,7 @@ from types import TracebackType from . import qmp -from .qmp import SocketAddrT +from .qmp import SocketAddrT, QMPMessage LOG = logging.getLogger(__name__)
@@ -553,6 +553,8 @@ def _match(event): return True return False + event: Optional[QMPMessage] + # Search cached events for event in self._events: if _match(event):
@@ -562,6 +564,8 @@ def _match(event): # Poll for new events while True: event = self._qmp.pull_event(wait=timeout) + if event is None: + break if _match(event): return event self._events.append(event)
Signature · 1 line
2.21.3
Quoted 1 line · John Snow
Requires: [email protected]
I don't know if patchew understand that, or if it requires:
Based-on: [email protected]
Quoted 30 lines
This series is extracted from my larger series that attempted to bundle our python module as an installable module. These fixes don't require that, so they are being sent first as I think there's less up for debate in here.
This requires my "refactor shutdown" patch as a pre-requisite.
"v2":
- This version supports iotests 297
- Many patches merged by Phil are removed
- Replacesiotests.pytype aliases with centralized ones (See patch 2)
- Imports etc are reworked to use the non-installable package layout instead. (Mostly important for patch 3)Testing this out:
- You'll need Python3.6+
- I encourage you to use a virtual environment!
- You don't necessarily need these exact versions, but I didn't test the lower bounds, use older versions at your peril:
- pylint==2.5.0
- mypy=0.770
- flake8=3.7.8Quoted 5 lines
cd ~/src/qemu/python/
flake8 qemu
mypy --strict qemu
cd qemu
pylint *.py
Quoted 6 lines
These should all 100% pass.
---
Open RFC: What's the right way to hook this into make check to prevent regressions?
We recently added iotest 297 in group meta; is there a way to run './check -g meta' alongside the other iotests that 'make check' already triggers?
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
PATCH v2 12/16 python/machine.py: Add _qmp access shim
In reply to John SnowLike many other Optional[] types, it's not always a given that this object will be set. Wrap it in a type-shim that raises a meaningful error and will always return a concrete type.
--- python/qemu/machine.py | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
python/qemu/machine.py +9 -3
@@ -117,7 +117,7 @@ def __init__(self, binary, args=None, wrapper=None, name=None, self._events = [] self._iolog = None self._qmp_set = True # Enable QMP monitor by default. - self._qmp = None + self._qmp_connection: Optional[qmp.QEMUMonitorProtocol] = None self._qemu_full_args = None self._temp_dir = None self._launched = False
@@ -283,7 +283,7 @@ def _pre_launch(self): if self._remove_monitor_sockfile: assert isinstance(self._monitor_address, str) self._remove_files.append(self._monitor_address) - self._qmp = qmp.QEMUMonitorProtocol( + self._qmp_connection = qmp.QEMUMonitorProtocol( self._monitor_address, server=True, nickname=self._name
@@ -450,7 +450,13 @@ def set_qmp_monitor(self, enabled=True): self._qmp_set = True else: self._qmp_set = False - self._qmp = None + self._qmp_connection = None + + @property + def _qmp(self) -> qmp.QEMUMonitorProtocol: + if self._qmp_connection is None: + raise QEMUMachineError("Attempt to access QMP with no connection") + return self._qmp_connection @classmethod def _qmp_args(cls, _conv_keys: bool = True, **args: Any) -> Dict[str, Any]:
Signature · 1 line
2.21.3
PATCH v2 15/16 iotests.py: Adjust HMP kwargs typing
In reply to John Snowmypy wants to ensure there's consistency between the kwargs arguments types and any unspecified keyword arguments. In this case, conv_keys is a bool, but the remaining keys are Any type. Mypy (correctly) infers the **kwargs type to be **Dict[str, str], which is not compatible withconv_keys: bool.
Because QMP typing is a little fraught right now anyway, re-type kwargs to Dict[str, Any] which has the benefit of silencing this check right now.
A future re-design might type these more aggressively, but this will give us a baseline to work from with minimal disruption.
(Thanks Kevin Wolf for the debugging assist here)
--- tests/qemu-iotests/iotests.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/qemu-iotests/iotests.py +1 -1
@@ -553,7 +553,7 @@ def add_incoming(self, addr): def hmp(self, command_line: str, use_log: bool = False) -> QMPMessage: cmd = 'human-monitor-command' - kwargs = {'command-line': command_line} + kwargs: Dict[str, Any] = {'command-line': command_line} if use_log: return self.qmp_log(cmd, **kwargs) else:
Signature · 1 line
2.21.3
PATCH v2 11/16 python/machine.py: use qmp.command
In reply to John Snowmachine.py and qmp.py both do the same thing here; refactor machine.py to use qmp.py's functionality more directly.
--- python/qemu/machine.py | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)
python/qemu/machine.py +15 -11
@@ -25,6 +25,8 @@ import socket import tempfile from typing import ( + Any, + Dict, List, Optional, Type,
@@ -450,17 +452,23 @@ def set_qmp_monitor(self, enabled=True): self._qmp_set = False self._qmp = None - def qmp(self, cmd, conv_keys=True, **args): - """ - Invoke a QMP command and return the response dict - """ + @classmethod + def _qmp_args(cls, _conv_keys: bool = True, **args: Any) -> Dict[str, Any]: qmp_args = dict() for key, value in args.items(): - if conv_keys: + if _conv_keys: qmp_args[key.replace('_', '-')] = value else: qmp_args[key] = value + return qmp_args + def qmp(self, cmd: str, + conv_keys: bool = True, + **args: Any) -> QMPMessage: + """ + Invoke a QMP command and return the response dict + """ + qmp_args = self._qmp_args(conv_keys, **args) return self._qmp.cmd(cmd, args=qmp_args) def command(self, cmd, conv_keys=True, **args):
@@ -469,12 +477,8 @@ def command(self, cmd, conv_keys=True, **args): On success return the response dict. On failure raise an exception. """ - reply = self.qmp(cmd, conv_keys, **args) - if reply is None: - raise qmp.QMPError("Monitor is closed") - if "error" in reply: - raise qmp.QMPResponseError(reply) - return reply["return"] + qmp_args = self._qmp_args(conv_keys, **args) + return self._qmp.command(cmd, **qmp_args) def get_qmp_event(self, wait=False): """
Signature · 1 line
2.21.3
PATCH v2 13/16 python/machine.py: fix _popen access
In reply to John SnowAs always, Optional[T] causes problems with unchecked access. Add a helper that asserts the pipe is present before we attempt to talk with it.
--- python/qemu/machine.py | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
python/qemu/machine.py +12 -6
@@ -113,7 +113,7 @@ def __init__(self, binary, args=None, wrapper=None, name=None, # Runstate self._qemu_log_path = None self._qemu_log_file = None - self._popen = None + self._popen: Optional['subprocess.Popen[bytes]'] = None self._events = [] self._iolog = None self._qmp_set = True # Enable QMP monitor by default.
@@ -225,6 +225,12 @@ def is_running(self): """Returns true if the VM is running.""" return self._popen is not None and self._popen.poll() is None + @property + def _subp(self) -> 'subprocess.Popen[bytes]': + if self._popen is None: + raise QEMUMachineError('Subprocess pipe not present') + return self._popen + def exitcode(self): """Returns the exit code if possible, or None.""" if self._popen is None:
@@ -235,7 +241,7 @@ def get_pid(self): """Returns the PID of the running process, or None.""" if not self.is_running(): return None - return self._popen.pid + return self._subp.pid def _load_io_log(self): if self._qemu_log_path is not None:
@@ -365,7 +371,7 @@ def wait(self): """ Wait for the VM to power off """ - self._popen.wait() + self._subp.wait() if self._qmp: self._qmp.close() self._post_shutdown()
@@ -377,8 +383,8 @@ def _hard_shutdown(self) -> None: if not self.is_running(): return - self._popen.kill() - self._popen.wait(timeout=60) + self._subp.kill() + self._subp.wait(timeout=60) def _soft_shutdown(self, has_quit: bool = False, timeout: int = 3) -> None: """
@@ -395,7 +401,7 @@ def _soft_shutdown(self, has_quit: bool = False, timeout: int = 3) -> None: self._qmp.cmd('quit') self._qmp.close() - self._popen.wait(timeout=timeout) + self._subp.wait(timeout=timeout) def _do_shutdown(self, has_quit: bool = False, timeout: int = 3) -> None: """
Signature · 1 line
2.21.3
PATCH v2 16/16 python/qemu: Add mypy type annotations
In reply to John SnowThese should all be purely annotations with no changes in behavior at all. You need to be in the python folder, but you should be able to confirm that these annotations are correct (or at least self-consistent) by running mypy --strict qemu.
--- python/qemu/accel.py | 8 ++-- python/qemu/machine.py | 96 ++++++++++++++++++++++++------------------ python/qemu/qmp.py | 44 ++++++++++--------- python/qemu/qtest.py | 27 +++++++----- 4 files changed, 100 insertions(+), 75 deletions(-)
python/qemu/accel.py +5 -3
@@ -17,6 +17,7 @@ import logging import os import subprocess +from typing import List, Optional LOG = logging.getLogger(__name__)
@@ -29,7 +30,7 @@ } -def list_accel(qemu_bin): +def list_accel(qemu_bin: str) -> List[str]: """ List accelerators enabled in the QEMU binary.
@@ -49,7 +50,8 @@ def list_accel(qemu_bin): return [acc.strip() for acc in out.splitlines()[1:]] -def kvm_available(target_arch=None, qemu_bin=None): +def kvm_available(target_arch: Optional[str] = None, + qemu_bin: Optional[str] = None) -> bool: """ Check if KVM is available using the following heuristic: - Kernel module is present in the host;
@@ -72,7 +74,7 @@ def kvm_available(target_arch=None, qemu_bin=None): return True -def tcg_available(qemu_bin): +def tcg_available(qemu_bin: str) -> bool: """ Check if TCG is available.
python/qemu/machine.py +54 -42
299 lines not on this page · raw message
python/qemu/qmp.py +25 -19
163 lines not on this page · raw message
python/qemu/qtest.py +16 -11
@@ -24,6 +24,8 @@ Optional, Sequence, TextIO, + Tuple, + Union, ) from .machine import QEMUMachine
@@ -43,7 +45,8 @@ class QEMUQtestProtocol: No conection is estabalished by __init__(), this is done by the connect() or accept() methods. """ - def __init__(self, address, server=False): + def __init__(self, address: Union[Tuple[str, str], str], + server: bool = False): self._address = address self._sock = self._get_sock() self._sockfile: Optional[TextIO] = None
@@ -51,14 +54,14 @@ def __init__(self, address, server=False): self._sock.bind(self._address) self._sock.listen(1) - def _get_sock(self): + def _get_sock(self) -> socket.socket: if isinstance(self._address, tuple): family = socket.AF_INET else: family = socket.AF_UNIX return socket.socket(family, socket.SOCK_STREAM) - def connect(self): + def connect(self) -> None: """ Connect to the qtest socket.
@@ -67,7 +70,7 @@ def connect(self): self._sock.connect(self._address) self._sockfile = self._sock.makefile(mode='r') - def accept(self): + def accept(self) -> None: """ Await connection from QEMU.
@@ -76,7 +79,7 @@ def accept(self): self._sock, _ = self._sock.accept() self._sockfile = self._sock.makefile(mode='r') - def cmd(self, qtest_cmd): + def cmd(self, qtest_cmd: str) -> str: """ Send a qtest command on the wire.
@@ -87,14 +90,16 @@ def cmd(self, qtest_cmd): resp = self._sockfile.readline() return resp - def close(self): - """Close this socket.""" + def close(self) -> None: + """ + Close this socket. + """ self._sock.close() if self._sockfile: self._sockfile.close() self._sockfile = None - def settimeout(self, timeout): + def settimeout(self, timeout: Optional[float]) -> None: """Set a timeout, in seconds.""" self._sock.settimeout(timeout)
@@ -118,7 +123,7 @@ def __init__(self, super().__init__(binary, args, name=name, test_dir=test_dir, socket_scm_helper=socket_scm_helper, sock_dir=sock_dir) - self._qtest = None + self._qtest: Optional[QEMUQtestProtocol] = None self._qtest_path = os.path.join(sock_dir, name + "-qtest.sock") @property
@@ -130,7 +135,7 @@ def _base_args(self) -> List[str]: ]) return args - def _pre_launch(self): + def _pre_launch(self) -> None: super()._pre_launch() self._qtest = QEMUQtestProtocol(self._qtest_path, server=True)
@@ -139,7 +144,7 @@ def _post_launch(self) -> None: super()._post_launch() self._qtest.accept() - def _post_shutdown(self): + def _post_shutdown(self) -> None: super()._post_shutdown() self._remove_if_exists(self._qtest_path)
Signature · 1 line
2.21.3
Quoted 41 lines · Eric Blake
Quoted 1 line · John Snow
Requires: [email protected]
I don't know if patchew understand that, or if it requires:
Based-on: [email protected]
Quoted 34 lines
This series is extracted from my larger series that attempted to bundle our python module as an installable module. These fixes don't require that,
so they are being sent first as I think there's less up for debate in here.This requires my "refactor shutdown" patch as a pre-requisite.
"v2":
- This version supports iotests 297
- Many patches merged by Phil are removed
- Replacesiotests.pytype aliases with centralized ones (See patch 2)
- Imports etc are reworked to use the non-installable package layout instead. (Mostly important for patch 3)Testing this out:
- You'll need Python3.6+
- I encourage you to use a virtual environment!
- You don't necessarily need these exact versions, but I didn't test the lower bounds, use older versions at your peril:
- pylint==2.5.0
- mypy=0.770
- flake8=3.7.8Quoted 5 lines
cd ~/src/qemu/python/
flake8 qemu
mypy --strict qemu
cd qemu
pylint *.pyThese should all 100% pass.
Quoted 9 lines
Quoted 4 lines
---
Open RFC: What's the right way to hook this into make check to prevent regressions?
We recently added iotest 297 in group meta; is there a way to run './check -g meta' alongside the other iotests that 'make check' already triggers?
If we want to distribute any of this code independently of qemu.git (And I think we do), I think relying on the iotests infrastructure will hurt more than it will help.
I think I should try to maintain some independence of this folder from the rest of the QEMU base; so it should be able to run the linting tests under its own power.
(So, I guess, a Makefile?)
but there's further problems: this infrastructure is 3.6+ only, but the build system only requires 3.5+. It has to be an optional testing target that executes only when it's possible to. It also requires additional dependencies not checked for in configure -- mypy, pylint, and flake8.
I am wondering if there's a nice way to create a check target that builds a virtual environment with pinned dependencies, and then uses that to run the lint tests. As long as the machine you're running on has at least python3.6+ it should be able to run the tests.
I just don't really have a plan yet...
--js
Quoted 1 line · John Snow
Requires: [email protected]
Hmm, somehow, I can't find it neither in https://lists.gnu.org/archive/html/qemu-devel/
nor in my thunderbird..
Could you post sequence of your series by subject, or export a git branch?
Signature · 2 lines
Best regards, Vladimir
Quoted 10 lines · Vladimir Sementsov-Ogievskiy
Quoted 1 line · John Snow
Requires: [email protected]
Hmm, somehow, I can't find it neither in
https://lists.gnu.org/archive/html/qemu-devel/
nor in my thunderbird..Could you post sequence of your series by subject, or export a git branch?
1.
[PATCH v2 0/1] python/machine.py: refactor shutdown
https://github.com/jnsnow/qemu/tree/python-package-reorder
(Patch that re-writes shutdown and kill)
2.
[PATCH v2 00/16] python: add mypy support to python/qemu
https://github.com/jnsnow/qemu/tree/python-package-mypy
(This patchset.)
3.
[PATCH 0/7] python: create installable package
https://github.com/jnsnow/qemu/tree/python-package-refactor
(Python package series)
Re: [PATCH v2 05/16] python/qmp.py: add casts to JSON deserialization
In reply to John SnowAm 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 33 lines
mypy and python type hints are not powerful enough to properly describe JSON messages in Python 3.6. The best we can do, generally, is describe them as Dict[str, Any].
Add casts to coerce this type for static analysis; but do NOT enforce this type at runtime in any way.
Note: Python 3.8 adds a TypedDict construct which allows for the description of more arbitrary Dictionary shapes. There is a third-party module, "Pydantic", which is compatible with 3.6 that can be used instead of the JSON library that parses JSON messages to fully-typed Python objects, and may be preferable in some cases.
(That is well beyond the scope of this commit or series.)
Signed-off-by John Snow <[email protected]>--- python/qemu/qmp.py | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)python/qemu/qmp.py +1
-0@@ -13,6 +13,7 @@ import logging from typing import ( Any, + cast, Dict, Optional, TextIO,
python/qemu/qmp.py def __json_read(self, only_event=False): · line 137
Quoted 8 lines
python/qemu/qmp.py +4
-1@@ -130,7 +131,10 @@ def __json_read(self, only_event=False): data = self.__sockfile.readline() if not data: return None - resp = json.loads(data) + # By definition, any JSON received from QMP is a QMPMessage, + # and we are asserting only at static analysis time that it + # has a particular shape. + resp = cast(QMPMessage, json.loads(data))
Instead of casting, you can just specify the variable type:
resp: QMPMessage = json.loads(data)
I don't think that json.loads() will actually return something other than Any anytime soon, but it's generally nicer to avoid casts and if it eventually does change, we'll get the type check instead of silencing it.
python/qemu/qmp.py def command(self, cmd, **kwds): · line 269
Quoted 9 lines
python/qemu/qmp.py +1
-1if 'event' in resp: self.logger.debug("<<< %s", resp) self.__events.append(resp)@@ -262,7 +266,7 @@ def command(self, cmd, **kwds): ret = self.cmd(cmd, kwds) if 'error' in ret: raise QMPResponseError(ret) - return ret['return'] + return cast(QMPReturnValue, ret['return'])
This one can't be easily avoided, though.
Kevin
Re: [PATCH v2 10/16] python/machine.py: Handle None events in event_wait
In reply to John SnowAm 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 3 lines
If the timeout is 0, we can get None back. Handle this explicitly.
Signed-off-by John Snow <[email protected]>
Subject line: This is events_wait(), not event_wait(). Both functions exist.
python/qemu/machine.py def _match(event): · line 571
Quoted 9 lines
python/qemu/machine.py +2
-0@@ -562,6 +564,8 @@ def _match(event): # Poll for new events while True: event = self._qmp.pull_event(wait=timeout) + if event is None: + break if _match(event): return event self._events.append(event)
Hm... How could this ever work? I guess we just never really tested whether timeouts actually time out?
(It's still somewhat unintuitive that receiving an unrelated event resets the timeout, but not the problem of this series...)
Kevin
Re: [PATCH v2 16/16] python/qemu: Add mypy type annotations
In reply to John SnowAm 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 21 lines
These should all be purely annotations with no changes in behavior at all. You need to be in the python folder, but you should be able to confirm that these annotations are correct (or at least self-consistent) by running
mypy --strict qemu.Signed-off-by John Snow <[email protected]>python/qemu/qtest.py +2
-0@@ -24,6 +24,8 @@ Optional, Sequence, TextIO, + Tuple, + Union, ) from .machine import QEMUMachine
python/qemu/qtest.py class QEMUQtestProtocol: · line 49
Quoted 6 lines
python/qemu/qtest.py +2
-1@@ -43,7 +45,8 @@ class QEMUQtestProtocol: No conection is estabalished by __init__(), this is done by the connect() or accept() methods. """ - def __init__(self, address, server=False): + def __init__(self, address: Union[Tuple[str, str], str], + server: bool = False):
Shouldn't this be SocketAddrT now?
Kevin
Am 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 7 lines
Requires: [email protected]
This series is extracted from my larger series that attempted to bundle our python module as an installable module. These fixes don't require that, so they are being sent first as I think there's less up for debate in here.
This requires my "refactor shutdown" patch as a pre-requisite.
I had only minor comments, so with or without the suggested changes:
Re: [PATCH v2 05/16] python/qmp.py: add casts to JSON deserialization
In reply to Kevin WolfQuoted 45 lines · Kevin Wolf
Am 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 33 lines
mypy and python type hints are not powerful enough to properly describe JSON messages in Python 3.6. The best we can do, generally, is describe them as Dict[str, Any].
Add casts to coerce this type for static analysis; but do NOT enforce this type at runtime in any way.
Note: Python 3.8 adds a TypedDict construct which allows for the description of more arbitrary Dictionary shapes. There is a third-party module, "Pydantic", which is compatible with 3.6 that can be used instead of the JSON library that parses JSON messages to fully-typed Python objects, and may be preferable in some cases.
(That is well beyond the scope of this commit or series.)
Signed-off-by John Snow <[email protected]>--- python/qemu/qmp.py | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)python/qemu/qmp.py +1
-0@@ -13,6 +13,7 @@ import logging from typing import ( Any, + cast, Dict, Optional, TextIO,python/qemu/qmp.py def __json_read(self, only_event=False): · line 137
Quoted 8 lines
python/qemu/qmp.py +4
-1@@ -130,7 +131,10 @@ def __json_read(self, only_event=False): data = self.__sockfile.readline() if not data: return None - resp = json.loads(data) + # By definition, any JSON received from QMP is a QMPMessage, + # and we are asserting only at static analysis time that it + # has a particular shape. + resp = cast(QMPMessage, json.loads(data))Instead of casting, you can just specify the variable type:
Quoted 7 lines
resp: QMPMessage =
json.loads(data)I don't think that
json.loads()will actually return something other than Any anytime soon, but it's generally nicer to avoid casts and if it eventually does change, we'll get the type check instead of silencing it.
Nice, that works with --strict too. Done.
Quoted 12 lines
python/qemu/qmp.py def command(self, cmd, **kwds): · line 269
Quoted 9 lines
python/qemu/qmp.py +1
-1if 'event' in resp: self.logger.debug("<<< %s", resp) self.__events.append(resp)@@ -262,7 +266,7 @@ def command(self, cmd, **kwds): ret = self.cmd(cmd, kwds) if 'error' in ret: raise QMPResponseError(ret) - return ret['return'] + return cast(QMPReturnValue, ret['return'])This one can't be easily avoided, though.
Sadly not -- we could conceivably make use of e.g. pydantic to create arbitrarily nuanced/strict structure definitions that are actually validated at runtime, but I will save that for a future series.
--js
Re: [PATCH v2 10/16] python/machine.py: Handle None events in event_wait
In reply to Kevin WolfQuoted 8 lines · Kevin Wolf
Am 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 3 lines
If the timeout is 0, we can get None back. Handle this explicitly.
Signed-off-by John Snow <[email protected]>Subject line: This is
events_wait(), notevent_wait(). Both functions exist.
Quoted 13 lines
python/qemu/machine.py def _match(event): · line 571
Quoted 9 lines
python/qemu/machine.py +2
-0@@ -562,6 +564,8 @@ def _match(event): # Poll for new events while True: event = self._qmp.pull_event(wait=timeout) + if event is None: + break if _match(event): return event self._events.append(event)Hm... How could this ever work? I guess we just never really tested whether timeouts actually time out?
It's weirder than you think.
pull_event, when a timeout is supplied, will pass that timeout to QEMUMonitorProtocol.__get_events, which populates the received event queue but does not return data on the stack. If there are no events in the queue and we are given a timeout, we will raise QMPTimeoutError if no event appears in that timeframe.
pull_event() will only return None in the case that you don't give it a timeout or tell it to wait.
The typing of events_wait allows us to specify a timeout of 0 here, which is treated as no-wait down the stack, which may return None if there was no such event ready.
Thus, break and also return None.
(I should update the docstring here.)
Quoted 5 lines
(It's still somewhat unintuitive that receiving an unrelated event resets the timeout, but not the problem of this series...)
Kevin
Yes, it's weird. It's not a timeout on this one event, it's a timeout on event-receiving activity. In practice, it works quite well for the iotest suite where there are often not other event drivers present. It was a quick hack (that I introduced!) to ensure that iotests would halt in some finite amount of time.
--js
Re: [PATCH v2 16/16] python/qemu: Add mypy type annotations
In reply to Kevin WolfQuoted 31 lines · Kevin Wolf
Am 02.06.2020 um 23:45 hat John Snow geschrieben:
Quoted 21 lines
These should all be purely annotations with no changes in behavior at all. You need to be in the python folder, but you should be able to confirm that these annotations are correct (or at least self-consistent) by running
mypy --strict qemu.Signed-off-by John Snow <[email protected]>python/qemu/qtest.py +2
-0@@ -24,6 +24,8 @@ Optional, Sequence, TextIO, + Tuple, + Union, ) from .machine import QEMUMachinepython/qemu/qtest.py class QEMUQtestProtocol: · line 49
Quoted 6 lines
python/qemu/qtest.py +2
-1@@ -43,7 +45,8 @@ class QEMUQtestProtocol: No conection is estabalished by __init__(), this is done by the connect() or accept() methods. """ - def __init__(self, address, server=False): + def __init__(self, address: Union[Tuple[str, str], str], + server: bool = False):Shouldn't this be SocketAddrT now?
Quoted 2 lines
Kevin
Ah, yeah. I had intended it for QMP, but it obviously works here, too.