Skip to contentSkip to conversation

rockchip: rk3399: Add SPI boot

PATCH New Jagan Teki 1 participant 5 messages Jun 8, 2020 1 message not in the archive

Subsystems (3)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

v4 cover rockchip: rk3399: Add SPI boot

Now, nvme scan seems stable with environment.

This series v4 version for SPI boot support on rk3399.

Changes for v4:
- adjust env offset, size
changes for v3:
- SPI env offset, size changes based on roc-rk3399-pc Changes for v2:
- same defconfig to support both MMC, SPI boot
- add spi flash program document

Any inputs?
Jagan.

Jagan Teki (4):
Makefile: Drop to handle rkspi image type
roc-rk3399-pc: Mark default env from SPI
roc-rk3399-pc: Add SPI boot
doc: rockchip: Document SPI flash program steps

 Makefile                                  | 11 ++--------
 arch/arm/dts/rk3399-roc-pc-u-boot.dtsi    | 12 ++++++++++-
 configs/roc-pc-mezzanine-rk3399_defconfig |  7 +++++-
 configs/roc-pc-rk3399_defconfig           |  7 +++++-
 doc/board/rockchip/rockchip.rst           | 26 ++++++++++++++++++++++-
 include/configs/roc-pc-rk3399.h           |  4 ----
 6 files changed, 50 insertions(+), 17 deletions(-)
Signature · 1 line
2.20.1

A message that is not in the archive (sent off-list or not yet received): 20200608181708.17842-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org

author
#2 lore raw

PATCH v4 1/4 Makefile: Drop to handle rkspi image type

On rockchip platforms, SPI boot image creation is not straightforward like MMC boot image creation where former requires to specify tpl, spl in multimage format in mkimage, and later simply do a concatenate mkimaged-tpl with spl.

On this note, let drop rkspi image type creation via kbuild and let inform via rockchip.rst

---
Changes for v4:
- none

 Makefile | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
Makefile +2 -9
index 3851dd9fa0..db3b6b9991 100644
@@ -1438,22 +1438,15 @@ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 
 ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
 
-# rockchip image type
-ifeq ($(CONFIG_SPL_SPI_LOAD),y)
-ROCKCHIP_IMG_TYPE := rkspi
-else
-ROCKCHIP_IMG_TYPE := rksd
-endif
-
 # TPL + SPL
 ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
-MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
 tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
 	$(call if_changed,mkimage)
 idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
 	$(call if_changed,cat)
 else
-MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
 idbloader.img: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif
Signature · 1 line
2.20.1
author
#3 lore raw

PATCH v4 2/4 roc-rk3399-pc: Mark default env from SPI

In reply to a message not in the archive

Mark the default U-Boot environment as SPI flash since this is an on board flash device.

Updated env offset, size in contrast with default since the U-Boot proper has starting from 384K.

---
Changes for v4:
- adjust env offset, size

 configs/roc-pc-mezzanine-rk3399_defconfig | 4 +++-
 configs/roc-pc-rk3399_defconfig           | 4 +++-
 include/configs/roc-pc-rk3399.h           | 4 ----
 3 files changed, 6 insertions(+), 6 deletions(-)
configs/roc-pc-mezzanine-rk3399_defconfig +3 -1
index 1c1539bcb9..9c6fd0c98c 100644
@@ -1,7 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
@@ -25,7 +27,7 @@ CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc-mezzanine"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
configs/roc-pc-rk3399_defconfig +3 -1
index 76e76c160e..b225eb38fe 100644
@@ -1,7 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
@@ -24,7 +26,7 @@ CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
include/configs/roc-pc-rk3399.h +0 -4
index d4cbc3532e..59fe22289c 100644
@@ -13,10 +13,6 @@
 
 #include <configs/rk3399_common.h>
 
-#if defined(CONFIG_ENV_IS_IN_MMC)
-# define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-
 #define SDRAM_BANK_SIZE			(2UL << 30)
 
 #endif
Signature · 1 line
2.20.1
author
#4 lore raw

PATCH v4 3/4 roc-rk3399-pc: Add SPI boot

In reply to a message not in the archive

U-Boot TPL 2020.07-rc3-00090-gd4e919f927-dirty (Jun 01 2020 - 23:45:53) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) Trying to boot from MMC1

NOTICE:  BL31: v2.2(release):
NOTICE:  BL31: Built : 15:05:37, May 12 2020

U-Boot 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530)

SoC: Rockchip rk3399
Reset cause: POR
Model: Firefly ROC-RK3399-PC Board
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0

Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Firefly ROC-RK3399-PC Board

---
Changes for v4:
- none

 arch/arm/dts/rk3399-roc-pc-u-boot.dtsi    | 12 +++++++++++-
 configs/roc-pc-mezzanine-rk3399_defconfig |  3 +++
 configs/roc-pc-rk3399_defconfig           |  3 +++
 3 files changed, 17 insertions(+), 1 deletion(-)
arch/arm/dts/rk3399-roc-pc-u-boot.dtsi +11 -1
index 141dd0b306..fc155e6903 100644
@@ -12,7 +12,11 @@
 	};
 
 	chosen {
-		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+		u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci, &sdmmc;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
 	};
 
 	vcc_hub_en: vcc_hub_en-regulator {
@@ -40,6 +44,12 @@
 	vin-supply = <&vcc_vbus_typec0>;
 };
 
+&spi1 {
+	spi_flash: flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
 &vdd_log {
 	regulator-min-microvolt = <430000>;
 	regulator-init-microvolt = <950000>;
configs/roc-pc-mezzanine-rk3399_defconfig +3 -0
index 9c6fd0c98c..03ba519af1 100644
@@ -9,12 +9,15 @@ CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
configs/roc-pc-rk3399_defconfig +3 -0
index b225eb38fe..b59b54bd89 100644
@@ -9,12 +9,15 @@ CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
Signature · 1 line
2.20.1
author
#5 lore raw

PATCH v4 4/4 doc: rockchip: Document SPI flash program steps

In reply to a message not in the archive

Document SPI flash program steps for rockchip platforms.

---
Changes for v4:
- none

 doc/board/rockchip/rockchip.rst | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
doc/board/rockchip/rockchip.rst +25 -1
index 7b72fab496..76b228a046 100644
@@ -162,6 +162,30 @@ Program the flash::
 Note: for rockchip 32-bit platforms the U-Boot proper image
 is u-boot-dtb.img
 
+SPI
+^^^
+
+Generating idbloader for SPI boot would require to input a multi image
+image format to mkimage tool instead of concerting (like for MMC boot).
+
+SPL-alone SPI boot image::
+
+        ./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img
+
+TPL+SPL SPI boot image::
+
+        ./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img
+
+Copy SPI boot images into SD card and boot from SD::
+
+        sf probe
+        load mmc 1:1 $kernel_addr_r idbloader.img
+        sf erase 0 +$filesize
+        sf write $kernel_addr_r 0 ${filesize}
+        load mmc 1:1 ${kernel_addr_r} u-boot.itb
+        sf erase 0x60000 +$filesize
+        sf write $kernel_addr_r 0x60000 ${filesize}
+
 TODO
 ----
 
@@ -171,4 +195,4 @@ TODO
 - Add missing SoC's with it boards list
 
 .. Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
-.. Sunday 24 May 2020 10:08:41 PM IST
+.. Tuesday 02 June 2020 12:18:57 AM IST
Signature · 1 line
2.20.1