PCI: Align return value of pcie capability accessors with other accessors
Subsystems (7)
cover PCI: Align return value of pcie capability accessors with other accessors
From: Bolarinwa Olayemi Saheed <[email protected]>
PATCH 1 to 7:
PCIBIOS_ error codes have positive values and they are passed down the call heirarchy from accessors. For functions which are meant to return only a negative value on failure, passing on this value is a bug.
To mitigate this, call pcibios_err_to_errno() before passing on return value from pcie capability accessors call heirarchy. This function converts any positive PCIBIOS_ error codes to negative non-PCI generic error values.
PATCH 8:
The pcie capability accessors can return 0, -EINVAL, or any PCIBIOS_ error code. The pci accessor on the other hand can only return 0 or any PCIBIOS_ error code.This inconsistency among these accessor makes it harder for callers to check for errors.
Return PCIBIOS_BAD_REGISTER_NUMBER instead of -EINVAL in all pcie capability accessors.
Bolarinwa Olayemi Saheed (8):
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
PCI: Align return value of pcie capability accessors with other
accessors
drivers/dma/ioat/init.c | 4 ++-- drivers/infiniband/hw/hfi1/pcie.c | 18 +++++++++++++----- drivers/pci/access.c | 8 ++++---- drivers/pci/pci.c | 10 ++++++++-- drivers/pci/pcie/aer.c | 12 ++++++++++-- drivers/scsi/smartpqi/smartpqi_init.c | 6 +++++- 6 files changed, 42 insertions(+), 16 deletions(-)
Signature · 1 line
2.18.2
PATCH 1/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
From: Bolarinwa Olayemi Saheed <[email protected]>
ioat3_dma_probe() returns PCIBIOS_ error codes from pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/dma/ioat/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/ioat/init.c +2 -2
@@ -1195,13 +1195,13 @@ static int ioat3_dma_probe(struct ioatdma_device *ioat_dma, int dca)/* disable relaxed ordering */ err =pcie_capability_read_word (pdev,IOAT_DEVCTRL_OFFSET , &val16);if (err) -return err; +return pcibios_err_to_errno (err);/* clear relaxed ordering enable */ val16 &= ~IOAT_DEVCTRL_ROE ; err =pcie_capability_write_word (pdev,IOAT_DEVCTRL_OFFSET , val16);if (err) -return err; +return pcibios_err_to_errno (err);if (ioat_dma->cap &IOAT_CAP_DPS ) writeb(ioat_pending_level + 1,
Signature · 1 line
2.18.2
PATCH 2/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
pcie_speeds() returns PCIBIOS_ error codes from pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/infiniband/hw/hfi1/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/hfi1/pcie.c +1 -1
@@ -306,7 +306,7 @@ int pcie_speeds(struct hfi1_devdata *dd) ret =pcie_capability_read_dword (dd->pcidev,PCI_EXP_LNKCAP , &linkcap);if (ret) {dd_dev_err (dd,"Unable to read from PCI config\n" ); -return ret; +return pcibios_err_to_errno (ret); }if ((linkcap &PCI_EXP_LNKCAP_SLS ) !=PCI_EXP_LNKCAP_SLS_8_0GB ) {
Signature · 1 line
2.18.2
PATCH 3/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
restore_pci_variables() and save_pci_variables() return PCIBIOS_ error codes from pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/infiniband/hw/hfi1/pcie.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/infiniband/hw/hfi1/pcie.c +12 -4
@@ -334,7 +334,11 @@ int pcie_speeds(struct hfi1_devdata *dd)return 0 ; } -/* restore command and BARs after a reset has wiped them out */ +/** +* restore command and BARs after a reset has wiped them out +* +* Returns 0 on success, otherwise a negative error value +*/ int restore_pci_variables (struct hfi1_devdata *dd) {int ret =0 ;
@@ -386,10 +390,14 @@ int restore_pci_variables(struct hfi1_devdata *dd) error:dd_dev_err (dd,"Unable to write to PCI config\n" ); -return ret; +return pcibios_err_to_errno (ret); } -/* Save BARs and command to rewrite after device reset */ +/** +* Save BARs and command to rewrite after device reset +* +* Returns 0 on success, otherwise a negative error value +*/ int save_pci_variables (struct hfi1_devdata *dd) {int ret =0 ;
@@ -441,7 +449,7 @@ int save_pci_variables(struct hfi1_devdata *dd) error:dd_dev_err (dd,"Unable to read from PCI config\n" ); -return ret; +return pcibios_err_to_errno (ret); }/*
Signature · 1 line
2.18.2
PATCH 4/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
Both pcie_set_readrq() and pcie_set_readrq() return PCIBIOS_ error codes which were passed down the call heirarchy from pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/pci/pci.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/pci/pci.c +8 -2
@@ -5698,6 +5698,7 @@ EXPORT_SYMBOL(pcie_get_readrq);int pcie_set_readrq (struct pci_dev *dev,int rq) {u16 v; +int ret;if (rq <128 || rq >4096 || !is_power_of_2 (rq))return -EINVAL ;
@@ -5716,8 +5717,10 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) v = (ffs (rq) -8 ) <<12 ; -return pcie_capability_clear_and_set_word (dev,PCI_EXP_DEVCTL , + ret =pcie_capability_clear_and_set_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_DEVCTL_READRQ , v); + +return pcibios_err_to_errno (ret); }EXPORT_SYMBOL (pcie_set_readrq);
@@ -5748,6 +5751,7 @@ EXPORT_SYMBOL(pcie_get_mps);int pcie_set_mps (struct pci_dev *dev,int mps) {u16 v; +int ret;if (mps <128 || mps >4096 || !is_power_of_2 (mps))return -EINVAL ;
@@ -5757,8 +5761,10 @@ int pcie_set_mps(struct pci_dev *dev, int mps)return -EINVAL ; v <<=5 ; -return pcie_capability_clear_and_set_word (dev,PCI_EXP_DEVCTL , + ret =pcie_capability_clear_and_set_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_DEVCTL_PAYLOAD , v); + +return pcibios_err_to_errno (ret); }EXPORT_SYMBOL (pcie_set_mps);
Signature · 1 line
2.18.2
PATCH 5/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
pqi_set_pcie_completion_timeout() return PCIBIOS_ error codes which were passed on down the call heirarchy from pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/scsi/smartpqi/smartpqi_init.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/scsi/smartpqi/smartpqi_init.c +5 -1
@@ -7423,8 +7423,12 @@ static int pqi_ctrl_init_resume(struct pqi_ctrl_info *ctrl_info)static inline int pqi_set_pcie_completion_timeout (struct pci_dev *pci_dev,u16 timeout) { -return pcie_capability_clear_and_set_word (pci_dev,PCI_EXP_DEVCTL2 , +int rc; + + rc =pcie_capability_clear_and_set_word (pci_dev,PCI_EXP_DEVCTL2 ,PCI_EXP_DEVCTL2_COMP_TIMEOUT , timeout); + +return pcibios_err_to_errno (rc); }static int pqi_pci_init (struct pqi_ctrl_info *ctrl_info)
Signature · 1 line
2.18.2
PATCH 6/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
pci_enable_pcie_error_reporting() return PCIBIOS_ error codes which were passed on down the call heirarchy pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/pci/pcie/aer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/pci/pcie/aer.c +5 -1
@@ -349,13 +349,17 @@ bool aer_acpi_firmware_first(void)int pci_enable_pcie_error_reporting (struct pci_dev *dev) { +int rc; +if (pcie_aer_get_firmware_first (dev))return -EIO ;if (!dev->aer_cap)return -EIO ; -return pcie_capability_set_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_AER_FLAGS ); + rc =pcie_capability_set_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_AER_FLAGS ); + +return rc; }EXPORT_SYMBOL_GPL (pci_enable_pcie_error_reporting);
Signature · 1 line
2.18.2
PATCH 7/8 PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
pci_disable_pcie_error_reporting() returns PCIBIOS_ error code which were passed down the call heirarchy from pcie capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.
Before passing on return value of pcie capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative non-PCI generic error values.
--- drivers/pci/pcie/aer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/pci/pcie/aer.c +5 -1
@@ -365,11 +365,15 @@ EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);int pci_disable_pcie_error_reporting (struct pci_dev *dev) { +int rc; +if (pcie_aer_get_firmware_first (dev))return -EIO ; -return pcie_capability_clear_word (dev,PCI_EXP_DEVCTL , + rc =pcie_capability_clear_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_AER_FLAGS ); + +return rc; }EXPORT_SYMBOL_GPL (pci_disable_pcie_error_reporting);
Signature · 1 line
2.18.2
PATCH 8/8 PCI: Align return value of pcie capability accessors with other accessors
In reply to [email protected]From: Bolarinwa Olayemi Saheed <[email protected]>
The pcie capability accessors can return 0, -EINVAL, or any PCIBIOS_ error code. PCIBIOS_ error codes have positive values. The pci accessor on the other hand can only return 0 or any PCIBIOS_ error code.This inconsistency among these accessor makes it harder for callers to check for errors.
Return PCIBIOS_BAD_REGISTER_NUMBER instead of -EINVAL in all pcie capability accessors.
--- drivers/pci/access.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/pci/access.c +4 -4
@@ -409,7 +409,7 @@ int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val) *val =0 ;if (pos &1 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (pcie_capability_reg_implemented (dev, pos)) { ret =pci_read_config_word (dev,pci_pcie_cap (dev) + pos, val);
@@ -444,7 +444,7 @@ int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val) *val =0 ;if (pos &3 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (pcie_capability_reg_implemented (dev, pos)) { ret =pci_read_config_dword (dev,pci_pcie_cap (dev) + pos, val);
@@ -469,7 +469,7 @@ EXPORT_SYMBOL(pcie_capability_read_dword);int pcie_capability_write_word (struct pci_dev *dev,int pos,u16 val) {if (pos &1 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (!pcie_capability_reg_implemented (dev, pos))return 0 ;
@@ -481,7 +481,7 @@ EXPORT_SYMBOL(pcie_capability_write_word);int pcie_capability_write_dword (struct pci_dev *dev,int pos,u32 val) {if (pos &3 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (!pcie_capability_reg_implemented (dev, pos))return 0 ;
Signature · 1 line
2.18.2
Quoted 35 lines · On Tue, Jun 09, 2020 at 05:39:42PM +0200, [email protected] wrote:
From: Bolarinwa Olayemi Saheed <[email protected]>
PATCH 1 to 7:
PCIBIOS_error codes have positive values and they are passed down the call heirarchy from accessors. For functions which are meant to return only a negative value on failure, passing on this value is a bug.To mitigate this, call
pcibios_err_to_errno()before passing on return value from pcie capability accessors call heirarchy. This function converts any positivePCIBIOS_error codes to negative non-PCI generic error values.PATCH 8:
The pcie capability accessors can return 0,
-EINVAL, or anyPCIBIOS_error code. The pci accessor on the other hand can only return 0 or anyPCIBIOS_error code.This inconsistency among these accessor makes it harder for callers to check for errors.Return
PCIBIOS_BAD_REGISTER_NUMBERinstead of-EINVALin all pcie capability accessors.Bolarinwa Olayemi Saheed (8):
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: ConvertPCIBIOS_error codes to non-PCI generic error codes
PCI: Align return value of pcie capability accessors with other
accessors
Quoted 7 lines
drivers/dma/ioat/init.c | 4 ++-- drivers/infiniband/hw/hfi1/pcie.c | 18 +++++++++++++----- drivers/pci/access.c | 8 ++++---- drivers/pci/pci.c | 10 ++++++++-- drivers/pci/pcie/aer.c | 12 ++++++++++-- drivers/scsi/smartpqi/smartpqi_init.c | 6 +++++- 6 files changed, 42 insertions(+), 16 deletions(-)
This is beautiful! Tiny patches that are easy to review and verify, and I think it's definitely going the right direction.
Nits that apply to all:
- These are really fixing driver bugs (even though the PCI core is making it harder than necessary for the drivers), so make the driver subject lines match the individual driver history, e.g.,
dmaengine: ioatdma: Convert PCIBIOS_* errors to generic -E* errors IB/hfi1: Convert PCIBIOS_* errors to generic -E* errors
Find the driver or subsystem prefix by running "git log --oneline" on each file you're touching.
- In commit logs, use "PCIe", not "pcie". Also "non-PCI generic" might be a little redundant; I think "generic" is enough.
- Order "Suggested-by" before "Signed-off-by".
When you repost this, be sure to include a "v2" in the subject.
Bjorn
Re: [PATCH 3/8] PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]Quoted 25 lines · On Tue, Jun 09, 2020 at 05:39:45PM +0200, [email protected] wrote:
From: Bolarinwa Olayemi Saheed <[email protected]>
restore_pci_variables()andsave_pci_variables()returnPCIBIOS_error codes from pcie capability accessors.
PCIBIOS_error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.Before passing on return value of pcie capability accessors, call
pcibios_err_to_errno()to convert any positivePCIBIOS_error codes to negative non-PCI generic error values.Signed-off-by Bolarinwa Olayemi Saheed <[email protected]>Suggested-by Bjorn Helgaas <[email protected]>--- drivers/infiniband/hw/hfi1/pcie.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)drivers/infiniband/hw/hfi1/pcie.c +0
-0@@ -334,7 +334,11 @@ int pcie_speeds(struct hfi1_devdata *dd)return 0 ; }
drivers/infiniband/hw/hfi1/pcie.c int pcie_speeds(struct hfi1_devdata *dd) · line 344
Quoted 10 lines
drivers/infiniband/hw/hfi1/pcie.c +5
-1-/* restore command and BARs after a reset has wiped them out */ +/** +* restore command and BARs after a reset has wiped them out +* +* Returns 0 on success, otherwise a negative error value +*/ int restore_pci_variables (struct hfi1_devdata *dd) {int ret =0 ;
These initializations are obviously superfluous. Generally I wouldn't encourage mixing fixes into a single patch, but removing the initialization and adding pcibios_err_to_errno() are both so trivial that I think it would be OK here.
Also, I didn't notice before, but these driver patches need to be cc'd to the driver maintainers. In this case, get_maintainers.pl says:
Mike Marciniszyn <[email protected]> (supporter:HFI1 DRIVER) Dennis Dalessandro <[email protected]> (supporter:HFI1 DRIVER) Doug Ledford <[email protected]> (supporter:INFINIBAND SUBSYSTEM) Jason Gunthorpe <[email protected]> (supporter:INFINIBAND SUBSYSTEM) [email protected] (open list:HFI1 DRIVER) [email protected] (open list)
I would also cc *all* the driver maintainers for all the patches on the cover letter and add a note about how we might merge these. They're all independent, so they *could* go individually via the separate driver trees, but I think it might make sense to merge them all together via the PCI tree just so the collection of similar fixes is merged all at once.
Quoted 29 lines
drivers/infiniband/hw/hfi1/pcie.c +7
-3@@ -386,10 +390,14 @@ int restore_pci_variables(struct hfi1_devdata *dd) error:dd_dev_err (dd,"Unable to write to PCI config\n" ); -return ret; +return pcibios_err_to_errno (ret); } -/* Save BARs and command to rewrite after device reset */ +/** +* Save BARs and command to rewrite after device reset +* +* Returns 0 on success, otherwise a negative error value +*/ int save_pci_variables (struct hfi1_devdata *dd) {int ret =0 ;@@ -441,7 +449,7 @@ int save_pci_variables(struct hfi1_devdata *dd) error:dd_dev_err (dd,"Unable to read from PCI config\n" ); -return ret; +return pcibios_err_to_errno (ret); }/* Signature · 1 line
2.18.2
Re: [PATCH 6/8] PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]Quoted 28 lines · On Tue, Jun 09, 2020 at 05:39:48PM +0200, [email protected] wrote:
From: Bolarinwa Olayemi Saheed <[email protected]>
pci_enable_pcie_error_reporting()returnPCIBIOS_error codes which were passed on down the call heirarchy pcie capability accessors.
PCIBIOS_error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.Before passing on return value of pcie capability accessors, call
pcibios_err_to_errno()to convert any positivePCIBIOS_error codes to negative non-PCI generic error values.Signed-off-by Bolarinwa Olayemi Saheed <[email protected]>Suggested-by Bjorn Helgaas <[email protected]>--- drivers/pci/pcie/aer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/pci/pcie/aer.c +2
-0@@ -349,13 +349,17 @@ bool aer_acpi_firmware_first(void)int pci_enable_pcie_error_reporting (struct pci_dev *dev) { +int rc; +
drivers/pci/pcie/aer.c bool aer_acpi_firmware_first(void) · line 362
Quoted 10 lines
drivers/pci/pcie/aer.c +3
-1if (pcie_aer_get_firmware_first (dev))return -EIO ;if (!dev->aer_cap)return -EIO ; -return pcie_capability_set_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_AER_FLAGS ); + rc =pcie_capability_set_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_AER_FLAGS ); + +return rc;
I think this is missing the pcibios_err_to_errno()?
Quoted 6 lines
drivers/pci/pcie/aer.c +0
-0}EXPORT_SYMBOL_GPL (pci_enable_pcie_error_reporting);Signature · 1 line
2.18.2
Re: [PATCH 7/8] PCI: Convert PCIBIOS_ error codes to non-PCI generic error codes
In reply to [email protected]Quoted 26 lines · On Tue, Jun 09, 2020 at 05:39:49PM +0200, [email protected] wrote:
From: Bolarinwa Olayemi Saheed <[email protected]>
pci_disable_pcie_error_reporting()returnsPCIBIOS_error code which were passed down the call heirarchy from pcie capability accessors.
PCIBIOS_error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure.Before passing on return value of pcie capability accessors, call
pcibios_err_to_errno()to convert any positivePCIBIOS_error codes to negative non-PCI generic error values.Signed-off-by Bolarinwa Olayemi Saheed <[email protected]>Suggested-by Bjorn Helgaas <[email protected]>--- drivers/pci/pcie/aer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/pci/pcie/aer.c +0
-0@@ -365,11 +365,15 @@ EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);int pci_disable_pcie_error_reporting (struct pci_dev *dev) {
drivers/pci/pcie/aer.c EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting); · line 376
Quoted 10 lines
drivers/pci/pcie/aer.c +5
-1+int rc; +if (pcie_aer_get_firmware_first (dev))return -EIO ; -return pcie_capability_clear_word (dev,PCI_EXP_DEVCTL , + rc =pcie_capability_clear_word (dev,PCI_EXP_DEVCTL ,PCI_EXP_AER_FLAGS ); + +return rc;
Also missing pcibios_err_to_errno()?
Quoted 6 lines
drivers/pci/pcie/aer.c +0
-0}EXPORT_SYMBOL_GPL (pci_disable_pcie_error_reporting);Signature · 1 line
2.18.2
Quoted 6 lines · On Tue, Jun 09, 2020 at 05:39:50PM +0200, [email protected] wrote:
From: Bolarinwa Olayemi Saheed <[email protected]>
The pcie capability accessors can return 0,
-EINVAL, or anyPCIBIOS_error code.PCIBIOS_error codes have positive values. The pci accessor on the other hand can only return 0 or anyPCIBIOS_error code.This inconsistency among these accessor makes it harder for callers to check for errors.
s/pcie/PCIe/ (also below)
s/pci/PCI/
s/code.This/code. This/
Quoted 52 lines
Return
PCIBIOS_BAD_REGISTER_NUMBERinstead of-EINVALin all pcie capability accessors.Signed-off-by Bolarinwa Olayemi Saheed <[email protected]>Suggested-by Bjorn Helgaas <[email protected]>--- drivers/pci/access.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)drivers/pci/access.c +4
-4@@ -409,7 +409,7 @@ int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val) *val =0 ;if (pos &1 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (pcie_capability_reg_implemented (dev, pos)) { ret =pci_read_config_word (dev,pci_pcie_cap (dev) + pos, val);@@ -444,7 +444,7 @@ int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val) *val =0 ;if (pos &3 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (pcie_capability_reg_implemented (dev, pos)) { ret =pci_read_config_dword (dev,pci_pcie_cap (dev) + pos, val);@@ -469,7 +469,7 @@ EXPORT_SYMBOL(pcie_capability_read_dword);int pcie_capability_write_word (struct pci_dev *dev,int pos,u16 val) {if (pos &1 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (!pcie_capability_reg_implemented (dev, pos))return 0 ;@@ -481,7 +481,7 @@ EXPORT_SYMBOL(pcie_capability_write_word);int pcie_capability_write_dword (struct pci_dev *dev,int pos,u32 val) {if (pos &3 ) -return -EINVAL ; +return PCIBIOS_BAD_REGISTER_NUMBER ;if (!pcie_capability_reg_implemented (dev, pos))return 0 ;Signature · 1 line
2.18.2