Skip to contentSkip to conversation

rockchip: rk3399pro: Add Add Rock Pi N10 support

PATCH New Jagan Teki 3 participants 9 messages Jun 10, 2020 – Jun 27, 2020 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

cover rockchip: rk3399pro: Add Add Rock Pi N10 support

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Dalang carrier board from Radxa.

All the required dts(i) files are synced from linux-next v5.7-rc1 since the current sync available for rk3399 is the same.

Any inputs?
Jagan.

Jagan Teki (4):
arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi
arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM
ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

 arch/arm/dts/Makefile                         |   3 +-
 .../arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi |   7 +
 arch/arm/dts/rk3399pro-rock-pi-n10.dts        |  18 +
 arch/arm/dts/rk3399pro-u-boot.dtsi            |   6 +
 arch/arm/dts/rk3399pro-vmarc-som.dtsi         | 333 ++++++++++++++++++
 arch/arm/dts/rk3399pro.dtsi                   |  22 ++
 .../dts/rockchip-radxa-dalang-carrier.dtsi    |  81 +++++
 board/rockchip/evb_rk3399/MAINTAINERS         |   6 +
 configs/rock-pi-n10-rk3399pro_defconfig       |  46 +++
 9 files changed, 521 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10.dts
 create mode 100644 arch/arm/dts/rk3399pro-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399pro-vmarc-som.dtsi
 create mode 100644 arch/arm/dts/rk3399pro.dtsi
 create mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
 create mode 100644 configs/rock-pi-n10-rk3399pro_defconfig
Signature · 1 line
2.25.1

A message that is not in the archive (sent off-list or not yet received): 20200610103658.96678-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org

#2 lore raw

PATCH 1/4 arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi

Sync linux-next v5.7-rc1 rk3399pro.dtsi.

---
 arch/arm/dts/rk3399pro.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 arch/arm/dts/rk3399pro.dtsi
arch/arm/dts/rk3399pro.dtsi new file +22 -0
new file mode 100644
index 0000000000..bb5ebf6608
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+
+#include "rk3399.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399pro";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie_phy {
+	status = "okay";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
Signature · 1 line
2.25.1
Reviewed-by on v1 1/4
#3 lore raw

Re: [PATCH 1/4] arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi

Quoted 3 lines · Jagan Teki

Sync linux-next v5.7-rc1 rk3399pro.dtsi.

Thanks,
- Kever

Quoted 33 lines
---
  arch/arm/dts/rk3399pro.dtsi | 22 ++++++++++++++++++++++
  1 file changed, 22 insertions(+)

create mode 100644 arch/arm/dts/rk3399pro.dtsi

arch/arm/dts/rk3399pro.dtsi new file +22 -0
new file mode 100644
index 0000000000..bb5ebf6608
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+
+#include "rk3399.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399pro";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie_phy {
+	status = "okay";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
#4 lore raw

PATCH 2/4 arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM

In reply to a message not in the archive

VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs.

Specification:
- Rockchip RK3399Pro
- PMIC: RK809-3
- SD slot, 16GiB eMMC
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet, PCIe
- HDMI, MIPI-DSI/CSI, eDP

Add initial support for VMARC RK3399Pro SOM, this would use with associated carrier board.

Sync this dtsi from linux-next v5.7-rc1.

---
 arch/arm/dts/rk3399pro-vmarc-som.dtsi | 333 ++++++++++++++++++++++++++
 1 file changed, 333 insertions(+)
 create mode 100644 arch/arm/dts/rk3399pro-vmarc-som.dtsi
arch/arm/dts/rk3399pro-vmarc-som.dtsi new file +333 -0
new file mode 100644
index 0000000000..0a516334f1
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};
Signature · 1 line
2.25.1
Reviewed-by on v1 2/4
#5 lore raw

Re: [PATCH 2/4] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM

Quoted 12 lines · Jagan Teki

VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs.

Specification:
- Rockchip RK3399Pro
- PMIC: RK809-3
- SD slot, 16GiB eMMC
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet, PCIe
- HDMI, MIPI-DSI/CSI, eDP

Quoted 6 lines

Add initial support for VMARC RK3399Pro SOM, this would use with associated carrier board.

Sync this dtsi from linux-next v5.7-rc1.

Thanks,
- Kever

Quoted 344 lines
---
  arch/arm/dts/rk3399pro-vmarc-som.dtsi | 333 ++++++++++++++++++++++++++
  1 file changed, 333 insertions(+)

create mode 100644 arch/arm/dts/rk3399pro-vmarc-som.dtsi

arch/arm/dts/rk3399pro-vmarc-som.dtsi new file +333 -0
new file mode 100644
index 0000000000..0a516334f1
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};
#6 lore raw

PATCH 3/4 ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier

In reply to a message not in the archive

Carrier board often referred as baseboard. For making complete SBC or any other industrial boards, these carrier boards will be used with associated SOMs.

Radxa has Dalang carrier board which supports on-board peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI, eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc.

Right now Dalang carrier board is used with two SBC-variants:
Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board Rock Pi N8 => VMARC RK3288 SOM + Dalang carrier board(+codec)

So add this carrier board dtsi as a separate file in ARM directory, so-that the same can reuse it in both rk3288, rk3399pro variants of Rockchip SOMs.

Sync this dtsi from linux-next v5.7-rc1.

---
 .../dts/rockchip-radxa-dalang-carrier.dtsi    | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi new file +81 -0
new file mode 100644
index 0000000000..df3712aedf
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};
Signature · 1 line
2.25.1
Reviewed-by on v1 3/4
#7 lore raw

Re: [PATCH 3/4] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier

Quoted 12 lines · Jagan Teki

Carrier board often referred as baseboard. For making complete SBC or any other industrial boards, these carrier boards will be used with associated SOMs.

Radxa has Dalang carrier board which supports on-board peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI, eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc.

Right now Dalang carrier board is used with two SBC-variants:
Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board Rock Pi N8 => VMARC RK3288 SOM + Dalang carrier board(+codec)

Quoted 7 lines

So add this carrier board dtsi as a separate file in ARM directory, so-that the same can reuse it in both rk3288, rk3399pro variants of Rockchip SOMs.

Sync this dtsi from linux-next v5.7-rc1.

Thanks,
- Kever

Quoted 92 lines
---
  .../dts/rockchip-radxa-dalang-carrier.dtsi    | 81 +++++++++++++++++++
  1 file changed, 81 insertions(+)

create mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi

arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi new file +81 -0
new file mode 100644
index 0000000000..df3712aedf
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};
#8 lore raw

PATCH 4/4 arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

In reply to a message not in the archive

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC.

So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files.

rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1.

Tested
- ROCK PI N10 Model B
- ROCK PI N10 Model C
- Boot from SD

---
 arch/arm/dts/Makefile                         |  3 +-
 .../arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi |  7 +++
 arch/arm/dts/rk3399pro-rock-pi-n10.dts        | 18 ++++++++
 arch/arm/dts/rk3399pro-u-boot.dtsi            |  6 +++
 board/rockchip/evb_rk3399/MAINTAINERS         |  6 +++
 configs/rock-pi-n10-rk3399pro_defconfig       | 46 +++++++++++++++++++
 6 files changed, 85 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10.dts
 create mode 100644 arch/arm/dts/rk3399pro-u-boot.dtsi
 create mode 100644 configs/rock-pi-n10-rk3399pro_defconfig
arch/arm/dts/Makefile +2 -1
index 9900b44274..07dfe06230 100644
@@ -136,7 +136,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-roc-pc-mezzanine.dtb \
 	rk3399-rock-pi-4.dtb \
 	rk3399-rock960.dtb \
-	rk3399-rockpro64.dtb
+	rk3399-rockpro64.dtb \
+	rk3399pro-rock-pi-n10.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RV1108) += \
 	rv1108-elgin-r1.dtb \
arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi new file +7 -0
new file mode 100644
index 0000000000..946a0230db
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399pro-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1600.dtsi"
arch/arm/dts/rk3399pro-rock-pi-n10.dts new file +18 -0
new file mode 100644
index 0000000000..6ac2d4d721
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
+};
arch/arm/dts/rk3399pro-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000000..7bddc3acdb
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-u-boot.dtsi"
board/rockchip/evb_rk3399/MAINTAINERS +6 -0
index 792df1087f..578638a58b 100644
@@ -68,3 +68,9 @@ M:	Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
 S:	Maintained
 F:	configs/rock-pi-4-rk3399_defconfig
 F:	arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
+
+ROCK-PI-N10
+M:	Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S:	Maintained
+F:	configs/rock-pi-n10-rk3399pro_defconfig
+F:	arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
configs/rock-pi-n10-rk3399pro_defconfig new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.25.1
Reviewed-by on v1 4/4
#9 lore raw

Re: [PATCH 4/4] arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

Quoted 10 lines · Jagan Teki

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC.

So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files.

Quoted 8 lines

rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1.

Tested
- ROCK PI N10 Model B
- ROCK PI N10 Model C
- Boot from SD

Thanks,
- Kever

Quoted 142 lines
---
  arch/arm/dts/Makefile                         |  3 +-
  .../arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi |  7 +++
  arch/arm/dts/rk3399pro-rock-pi-n10.dts        | 18 ++++++++
  arch/arm/dts/rk3399pro-u-boot.dtsi            |  6 +++
  board/rockchip/evb_rk3399/MAINTAINERS         |  6 +++
  configs/rock-pi-n10-rk3399pro_defconfig       | 46 +++++++++++++++++++
  6 files changed, 85 insertions(+), 1 deletion(-)

create mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399pro-rock-pi-n10.dts create mode 100644 arch/arm/dts/rk3399pro-u-boot.dtsi create mode 100644 configs/rock-pi-n10-rk3399pro_defconfig

arch/arm/dts/Makefile +2 -1
index 9900b44274..07dfe06230 100644
@@ -136,7 +136,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
  	rk3399-roc-pc-mezzanine.dtb \
  	rk3399-rock-pi-4.dtb \
  	rk3399-rock960.dtb \
-	rk3399-rockpro64.dtb
+	rk3399-rockpro64.dtb \
+	rk3399pro-rock-pi-n10.dtb
 
  dtb-$(CONFIG_ROCKCHIP_RV1108) += \
  	rv1108-elgin-r1.dtb \
arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi new file +7 -0
new file mode 100644
index 0000000000..946a0230db
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <[email protected]>
+ */
+
+#include "rk3399pro-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1600.dtsi"
arch/arm/dts/rk3399pro-rock-pi-n10.dts new file +18 -0
new file mode 100644
index 0000000000..6ac2d4d721
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
+};
arch/arm/dts/rk3399pro-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000000..7bddc3acdb
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <[email protected]>
+ */
+
+#include "rk3399-u-boot.dtsi"
board/rockchip/evb_rk3399/MAINTAINERS +6 -0
index 792df1087f..578638a58b 100644
@@ -68,3 +68,9 @@ M:	Jagan Teki <[email protected]>
  S:	Maintained
  F:	configs/rock-pi-4-rk3399_defconfig
  F:	arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
+
+ROCK-PI-N10
+M:	Jagan Teki <[email protected]>
+S:	Maintained
+F:	configs/rock-pi-n10-rk3399pro_defconfig
+F:	arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
configs/rock-pi-n10-rk3399pro_defconfig new file +46 -0
new file mode 100644
index 0000000000..c705ce01ce
@@ -0,0 +1,46 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb"
+CONFIG_MISC_INIT_R=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399pro-rock-pi-n10"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_ERRNO_STR=y