ARM: dts: Aspeed: Enable EHCI controllers
Subsystems (2)
PATCH 1/2 ARM: dts: Aspeed: Rainier: Enable EHCI controller
In reply to Eddie JamesEnable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port.
--- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +5 -1
@@ -71,6 +71,10 @@ }; +&ehci1 { + status = "okay"; +}; + &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","",
@@ -87,7 +91,7 @@ /*L0-L7*/ "","","","","","","","", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "cfam-reset","","","","","","","", /*R0-R7*/ "","","","","","","","",
Signature · 1 line
2.24.0
PATCH 2/2 ARM: dts: Aspeed: Tacoma: Enable EHCI controller
In reply to Eddie JamesEnable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port.
--- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +5 -1
@@ -95,6 +95,10 @@ }; }; +&ehci1 { + status = "okay"; +}; + &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","",
@@ -111,7 +115,7 @@ /*L0-L7*/ "","","","","","","","", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "led-rear-power","led-rear-id","","","","","","", + /*O0-O7*/ "led-rear-power","led-rear-id","","usb-power","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing", /*R0-R7*/ "","","","","","","","",
Signature · 1 line
2.24.0
cover ARM: dts: Aspeed: Enable EHCI controllers
Enable the second EHCI controller on both the Tacoma board and Rainier system.
Eddie James (2):
ARM: dts: Aspeed: Rainier: Enable EHCI controller
ARM: dts: Aspeed: Tacoma: Enable EHCI controller
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 +++++- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-)
Signature · 1 line
2.24.0
Joel Stanley
maintainerRe: [PATCH linux dev-5.4 2/2] ARM: dts: Aspeed: Tacoma: Enable EHCI controller
In reply to Eddie JamesQuoted 3 lines · Eddie James
Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port.
What's the idea behind the power control?
Is there any reason not to add a hog, so power is always applied?
Quoted 33 lines
Signed-off-by Eddie James <[email protected]>--- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +5
-2@@ -95,6 +95,10 @@ }; }; +&ehci1 { + status = "okay"; +}; + &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","",@@ -111,7 +115,7 @@ /*L0-L7*/ "","","","","","","","", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "led-rear-power","led-rear-id","","","","","","", + /*O0-O7*/ "led-rear-power","led-rear-id","","usb-power","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing", /*R0-R7*/ "","","","","","","","", --2.24.0
Re: [PATCH linux dev-5.4 2/2] ARM: dts: Aspeed: Tacoma: Enable EHCI controller
Quoted 9 lines · Joel Stanley
Quoted 3 lines · Eddie James
Enable the second EHCI controller on the AST2600. Also add a line- name
for the GPIO that controls power to the USB port.What's the idea behind the power control?
Is there any reason not to add a hog, so power is always applied?
There is a desire to allow the port to be disabled, for those that are worried about rogue USB sticks.
Joel Stanley
maintainerRe: [PATCH linux dev-5.4 2/2] ARM: dts: Aspeed: Tacoma: Enable EHCI controller
Quoted 8 lines · Brad Bishop
Quoted 6 lines · Joel Stanley
Quoted 3 lines · Eddie James
Enable the second EHCI controller on the AST2600. Also add a line- name
for the GPIO that controls power to the USB port.
Quoted 6 lines
Quoted 3 lines
What's the idea behind the power control?
Is there any reason not to add a hog, so power is always applied?
There is a desire to allow the port to be disabled, for those that are worried about rogue USB sticks.
Ok. Do we have userspace that enables the power?
I propose we hog them on for now, so we can test the USB function. When someone has time to implement the enable/disable function we can remove the hog.
Cheers,
Joel