dt-bindings: power: supply: bq25890: Indent example with tabs
Subsystems (3)
PATCH 1/2 dt-bindings: power: supply: bq25890: Indent example with tabs
Fix example indentation to tabs to follow generic Linux coding style. This avoids copying the space indentation to DTS when re-using the example.
--- .../bindings/power/supply/bq25890.txt | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-)
Documentation/devicetree/bindings/power/supply/bq25890.txt +11 -11
@@ -36,17 +36,17 @@ Optional properties: Example: bq25890 { - compatible = "ti,bq25890"; - reg = <0x6a>; + compatible = "ti,bq25890"; + reg = <0x6a>; - ti,battery-regulation-voltage = <4200000>; - ti,charge-current = <1000000>; - ti,termination-current = <50000>; - ti,precharge-current = <128000>; - ti,minimum-sys-voltage = <3600000>; - ti,boost-voltage = <5000000>; - ti,boost-max-current = <1000000>; + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + ti,precharge-current = <128000>; + ti,minimum-sys-voltage = <3600000>; + ti,boost-voltage = <5000000>; + ti,boost-max-current = <1000000>; - ti,use-ilim-pin; - ti,thermal-regulation-threshold = <120>; + ti,use-ilim-pin; + ti,thermal-regulation-threshold = <120>; };
Signature · 1 line
2.17.1
PATCH 2/2 dt-bindings: power: supply: bq25890: Document required interrupt
The driver requires interrupts (fails probe if it is not provided) so document this requirement in bindings.
--- Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/power/supply/bq25890.txt +4 -0
@@ -10,6 +10,7 @@ Required properties: * "ti,bq25895" * "ti,bq25896" - reg: integer, i2c address of the device. +- interrupts: interrupt line; - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); - ti,charge-current: integer, maximum charging current (in uA); - ti,termination-current: integer, charge will be terminated when current in
@@ -39,6 +40,9 @@ bq25890 { compatible = "ti,bq25890"; reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,battery-regulation-voltage = <4200000>; ti,charge-current = <1000000>; ti,termination-current = <50000>;
Signature · 1 line
2.17.1
Sebastian Reichel
maintainerRe: [PATCH 2/2] dt-bindings: power: supply: bq25890: Document required interrupt
Hi,
Quoted 7 lines · Krzysztof Kozlowski
The driver requires interrupts (fails probe if it is not provided) so document this requirement in bindings.
Fixes 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip")Cc <[email protected]>Signed-off-by Krzysztof Kozlowski <[email protected]>---
Thanks, queued.
-- Sebastian
Quoted 28 lines
Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ 1 file changed, 4 insertions(+)Documentation/devicetree/bindings/power/supply/bq25890.txt +4
-0@@ -10,6 +10,7 @@ Required properties: * "ti,bq25895" * "ti,bq25896" - reg: integer, i2c address of the device. +- interrupts: interrupt line; - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); - ti,charge-current: integer, maximum charging current (in uA); - ti,termination-current: integer, charge will be terminated when current in@@ -39,6 +40,9 @@ bq25890 { compatible = "ti,bq25890"; reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,battery-regulation-voltage = <4200000>; ti,charge-current = <1000000>; ti,termination-current = <50000>;Signature · 1 line
2.17.1
Sebastian Reichel
maintainerHi,
Quoted 6 lines · Krzysztof Kozlowski
Fix example indentation to tabs to follow generic Linux coding style. This avoids copying the space indentation to DTS when re-using the example.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Thanks, queued.
-- Sebastian
Quoted 39 lines
.../bindings/power/supply/bq25890.txt | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-)Documentation/devicetree/bindings/power/supply/bq25890.txt +11
-11@@ -36,17 +36,17 @@ Optional properties: Example: bq25890 { - compatible = "ti,bq25890"; - reg = <0x6a>; + compatible = "ti,bq25890"; + reg = <0x6a>; - ti,battery-regulation-voltage = <4200000>; - ti,charge-current = <1000000>; - ti,termination-current = <50000>; - ti,precharge-current = <128000>; - ti,minimum-sys-voltage = <3600000>; - ti,boost-voltage = <5000000>; - ti,boost-max-current = <1000000>; + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + ti,precharge-current = <128000>; + ti,minimum-sys-voltage = <3600000>; + ti,boost-voltage = <5000000>; + ti,boost-max-current = <1000000>; - ti,use-ilim-pin; - ti,thermal-regulation-threshold = <120>; + ti,use-ilim-pin; + ti,thermal-regulation-threshold = <120>; };Signature · 1 line
2.17.1